The author disclaims copyright to this source code.  In place of
a legal notice, here is a blessing:

  *   May you do good and not evil.
  *   May you find forgiveness for yourself and forgive others.
  *   May you share freely, never taking more than you give.

fts3_write.lo:	$(TOP)/ext/fts3/fts3_write.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_write.c

rtree.lo:	$(TOP)/ext/rtree/rtree.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/rtree/rtree.c

sqlite3session.lo:	$(TOP)/ext/userauth/userauth.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/userauth/userauth.c

userauth.lo:	$(TOP)/ext/session/sqlite3session.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/session/sqlite3session.c

json1.lo:	$(TOP)/ext/misc/json1.c
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/misc/json1.c

stmt.lo:	$(TOP)/ext/misc/stmt.c
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/misc/stmt.c

fts3_write.lo:	$(TOP)/ext/fts3/fts3_write.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_write.c

rtree.lo:	$(TOP)/ext/rtree/rtree.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/rtree/rtree.c

userauth.lo:	$(TOP)/ext/userauth/userauth.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/userauth/userauth.c

sqlite3session.lo:	$(TOP)/ext/session/sqlite3session.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/session/sqlite3session.c

json1.lo:	$(TOP)/ext/misc/json1.c
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/misc/json1.c

stmt.lo:	$(TOP)/ext/misc/stmt.c
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/misc/stmt.c

<h1 align="center">SQLite Source Repository</h1>

This repository contains the complete source code for the 
[SQLite database engine](https://sqlite.org/).  Some test scripts 
are also included.  However, many other test scripts
and most of the documentation are managed separately.

SQLite [does not use Git](https://sqlite.org/whynotgit.html).






If you are reading this on GitHub, then you are looking at an
unofficial mirror. See <https://sqlite.org/src> for the official
repository.












## Obtaining The Code

SQLite sources are managed using the
[Fossil](https://www.fossil-scm.org/), a distributed version control system
that was specifically designed to support SQLite development.
If you do not want to use Fossil, you can download tarballs or ZIP
archives or [SQLite archives](https://sqlite.org/cli.html#sqlar) as follows:

  *  Lastest trunk check-in as
     [Tarball](https://www.sqlite.org/src/tarball/sqlite.tar.gz),
     [ZIP-archive](https://www.sqlite.org/src/zip/sqlite.zip), or
     [SQLite-archive](https://www.sqlite.org/src/sqlar/sqlite.sqlar).
................................................................................

  *  **ext/misc/json1.c** - This file implements the various JSON functions
     that are build into SQLite.

There are many other source files.  Each has a succinct header comment that
describes its purpose and role within the larger system.





























## Contacts

The main SQLite webpage is [http://www.sqlite.org/](http://www.sqlite.org/)
with geographically distributed backups at
[http://www2.sqlite.org/](http://www2.sqlite.org) and
[http://www3.sqlite.org/](http://www3.sqlite.org).

<h1 align="center">SQLite Source Repository</h1>

This repository contains the complete source code for the 
[SQLite database engine](https://sqlite.org/).  Some test scripts 
are also included.  However, many other test scripts
and most of the documentation are managed separately.

## Version Control

SQLite sources are managed using the
[Fossil](https://www.fossil-scm.org/), a distributed version control system
that was specifically designed and written to support SQLite development.
The [Fossil repository](https://sqlite.org/src/timeline) contains the urtext.

If you are reading this on GitHub or some other Git repository or service,


then you are looking at a mirror.  The names of check-ins and
other artifacts in a Git mirror are different from the official
names for those objects.  The offical names for check-ins are
found in a footer on the check-in comment for authorized mirrors.
The official check-in name can also be seen in the `manifest.uuid` file
in the root of the tree.  Always use the official name, not  the
Git-name, when communicating about an SQLite check-in.

If you pulled your SQLite source code from a secondary source and want to
verify its integrity, there are hints on how to do that in the
[Verifying Code Authenticity](#vauth) section below.

## Obtaining The Code




If you do not want to use Fossil, you can download tarballs or ZIP
archives or [SQLite archives](https://sqlite.org/cli.html#sqlar) as follows:

  *  Lastest trunk check-in as
     [Tarball](https://www.sqlite.org/src/tarball/sqlite.tar.gz),
     [ZIP-archive](https://www.sqlite.org/src/zip/sqlite.zip), or
     [SQLite-archive](https://www.sqlite.org/src/sqlar/sqlite.sqlar).
................................................................................

  *  **ext/misc/json1.c** - This file implements the various JSON functions
     that are build into SQLite.

There are many other source files.  Each has a succinct header comment that
describes its purpose and role within the larger system.

<a name="vauth"></a>
## Verifying Code Authenticity

If you obtained an SQLite source tree from a secondary source, such as a
GitHub mirror, and you want to verify that it has not been altered, there
are a couple of ways to do that.

If you have an official release version of SQLite, and you are using the
`sqlite3.c` amalgamation, then SHA3-256 hashes for the amalgamation are
available in the [change log](https://www.sqlite.org/changes.html) on
the official website.  After building the `sqlite3.c` file, you can check
that is authentic by comparing the hash.  This does not ensure that the
test scripts are unaltered, but it does validate the deliverable part of
the code and only involves computing and comparing a single hash.

For versions other than an official release, or if you are building the
`sqlite3.c` amalgamation using non-standard build options, the verification
process is a little more involved.  The `manifest` file at the root directory
of the source tree ([example](https://sqlite.org/src/artifact/bd49a8271d650fa8))
contains either a SHA3-256 hash (for newer files) or a SHA1 hash (for 
older files) for every source file in the repository.  You can write a script
to extracts hashes from `manifest` and verifies the hashes against the 
corresponding files in the source tree.  The SHA3-256 hash of the `manifest`
file itself is the official name of the version of the source tree that you
have.  The `manifest.uuid` file should contain the SHA3-256 hash of the
`manifest` file.  If all of the above hash comparisons are correct, then
you can be confident that your source tree is authentic and unadulterated.

## Contacts

The main SQLite webpage is [http://www.sqlite.org/](http://www.sqlite.org/)
with geographically distributed backups at
[http://www2.sqlite.org/](http://www2.sqlite.org) and
[http://www3.sqlite.org/](http://www3.sqlite.org).

    if( !isFirstTerm ){
      zCsr += fts3GetVarint32(zCsr, &nPrefix);
    }
    isFirstTerm = 0;
    zCsr += fts3GetVarint32(zCsr, &nSuffix);
    
    assert( nPrefix>=0 && nSuffix>=0 );
    if( nPrefix>zCsr-zNode || nSuffix>zEnd-zCsr ){
      rc = FTS_CORRUPT_VTAB;
      goto finish_scan;
    }
    if( (i64)nPrefix+nSuffix>nAlloc ){
      char *zNew;
      nAlloc = ((i64)nPrefix+nSuffix) * 2;
      zNew = (char *)sqlite3_realloc64(zBuffer, nAlloc);

    if( !isFirstTerm ){
      zCsr += fts3GetVarint32(zCsr, &nPrefix);
    }
    isFirstTerm = 0;
    zCsr += fts3GetVarint32(zCsr, &nSuffix);
    
    assert( nPrefix>=0 && nSuffix>=0 );
    if( nPrefix>zCsr-zNode || nSuffix>zEnd-zCsr || nSuffix==0 ){
      rc = FTS_CORRUPT_VTAB;
      goto finish_scan;
    }
    if( (i64)nPrefix+nSuffix>nAlloc ){
      char *zNew;
      nAlloc = ((i64)nPrefix+nSuffix) * 2;
      zNew = (char *)sqlite3_realloc64(zBuffer, nAlloc);

  rc = sqlite3_declare_vtab(db, FTS3_TERMS_SCHEMA);
  if( rc!=SQLITE_OK ) return rc;

  nByte = sizeof(Fts3termTable) + sizeof(Fts3Table) + nDb + nFts3 + 2;
  p = (Fts3termTable *)sqlite3_malloc64(nByte);
  if( !p ) return SQLITE_NOMEM;
  memset(p, 0, nByte);

  p->pFts3Tab = (Fts3Table *)&p[1];
  p->pFts3Tab->zDb = (char *)&p->pFts3Tab[1];
  p->pFts3Tab->zName = &p->pFts3Tab->zDb[nDb+1];
  p->pFts3Tab->db = db;
  p->pFts3Tab->nIndex = iIndex+1;
  p->iIndex = iIndex;

  rc = sqlite3_declare_vtab(db, FTS3_TERMS_SCHEMA);
  if( rc!=SQLITE_OK ) return rc;

  nByte = sizeof(Fts3termTable) + sizeof(Fts3Table) + nDb + nFts3 + 2;
  p = (Fts3termTable *)sqlite3_malloc64(nByte);
  if( !p ) return SQLITE_NOMEM;
  memset(p, 0, (size_t)nByte);

  p->pFts3Tab = (Fts3Table *)&p[1];
  p->pFts3Tab->zDb = (char *)&p->pFts3Tab[1];
  p->pFts3Tab->zName = &p->pFts3Tab->zDb[nDb+1];
  p->pFts3Tab->db = db;
  p->pFts3Tab->nIndex = iIndex+1;
  p->iIndex = iIndex;

    void sqlite3Fts5UnicodeAscii(u8 *aArray, u8 *aAscii){
      int i = 0;
      int iTbl = 0;
      while( i<128 ){
        int bToken = aArray[ aFts5UnicodeData[iTbl] & 0x1F ];
        int n = (aFts5UnicodeData[iTbl] >> 5) + i;
        for(; i<128 && i<n; i++){
          aAscii[i] = bToken;
        }
        iTbl++;
      }
    }
  }]
}

    void sqlite3Fts5UnicodeAscii(u8 *aArray, u8 *aAscii){
      int i = 0;
      int iTbl = 0;
      while( i<128 ){
        int bToken = aArray[ aFts5UnicodeData[iTbl] & 0x1F ];
        int n = (aFts5UnicodeData[iTbl] >> 5) + i;
        for(; i<128 && i<n; i++){
          aAscii[i] = (u8)bToken;
        }
        iTbl++;
      }
    }
  }]
}

/*
** Empty (but do not delete) a hash table.
*/
void sqlite3Fts5HashClear(Fts5Hash*);

int sqlite3Fts5HashQuery(
  Fts5Hash*,                      /* Hash table to query */

  const char *pTerm, int nTerm,   /* Query term */
  const u8 **ppDoclist,           /* OUT: Pointer to doclist for pTerm */
  int *pnDoclist                  /* OUT: Size of doclist in bytes */
);

int sqlite3Fts5HashScanInit(
  Fts5Hash*,                      /* Hash table to query */
  const char *pTerm, int nTerm    /* Query prefix */
);

/*
** Empty (but do not delete) a hash table.
*/
void sqlite3Fts5HashClear(Fts5Hash*);

int sqlite3Fts5HashQuery(
  Fts5Hash*,                      /* Hash table to query */
  int nPre,
  const char *pTerm, int nTerm,   /* Query term */
  void **ppObj,                   /* OUT: Pointer to doclist for pTerm */
  int *pnDoclist                  /* OUT: Size of doclist in bytes */
);

int sqlite3Fts5HashScanInit(
  Fts5Hash*,                      /* Hash table to query */
  const char *pTerm, int nTerm    /* Query prefix */
);

  }

  *pnScore = nScore;
  if( piPos ){
    sqlite3_int64 iAdj = iFirst - (nToken - (iLast-iFirst)) / 2;
    if( (iAdj+nToken)>nDocsize ) iAdj = nDocsize - nToken;
    if( iAdj<0 ) iAdj = 0;
    *piPos = iAdj;
  }

  return rc;
}

/*
** Return the value in pVal interpreted as utf-8 text. Except, if pVal 
................................................................................
    /* Allocate the Fts5Bm25Data object */
    nPhrase = pApi->xPhraseCount(pFts);
    nByte = sizeof(Fts5Bm25Data) + nPhrase*2*sizeof(double);
    p = (Fts5Bm25Data*)sqlite3_malloc64(nByte);
    if( p==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memset(p, 0, nByte);
      p->nPhrase = nPhrase;
      p->aIDF = (double*)&p[1];
      p->aFreq = &p->aIDF[nPhrase];
    }

    /* Calculate the average document length for this FTS5 table */
    if( rc==SQLITE_OK ) rc = pApi->xRowCount(pFts, &nRow);

  }

  *pnScore = nScore;
  if( piPos ){
    sqlite3_int64 iAdj = iFirst - (nToken - (iLast-iFirst)) / 2;
    if( (iAdj+nToken)>nDocsize ) iAdj = nDocsize - nToken;
    if( iAdj<0 ) iAdj = 0;
    *piPos = (int)iAdj;
  }

  return rc;
}

/*
** Return the value in pVal interpreted as utf-8 text. Except, if pVal 
................................................................................
    /* Allocate the Fts5Bm25Data object */
    nPhrase = pApi->xPhraseCount(pFts);
    nByte = sizeof(Fts5Bm25Data) + nPhrase*2*sizeof(double);
    p = (Fts5Bm25Data*)sqlite3_malloc64(nByte);
    if( p==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memset(p, 0, (size_t)nByte);
      p->nPhrase = nPhrase;
      p->aIDF = (double*)&p[1];
      p->aFreq = &p->aIDF[nPhrase];
    }

    /* Calculate the average document length for this FTS5 table */
    if( rc==SQLITE_OK ) rc = pApi->xRowCount(pFts, &nRow);

      nNew = nNew * 2;
    }
    pNew = sqlite3_realloc64(pBuf->p, nNew);
    if( pNew==0 ){
      *pRc = SQLITE_NOMEM;
      return 1;
    }else{
      pBuf->nSpace = nNew;
      pBuf->p = pNew;
    }
  }
  return 0;
}


................................................................................
void *sqlite3Fts5MallocZero(int *pRc, sqlite3_int64 nByte){
  void *pRet = 0;
  if( *pRc==SQLITE_OK ){
    pRet = sqlite3_malloc64(nByte);
    if( pRet==0 ){
      if( nByte>0 ) *pRc = SQLITE_NOMEM;
    }else{
      memset(pRet, 0, nByte);
    }
  }
  return pRet;
}

/*
** Return a nul-terminated copy of the string indicated by pIn. If nIn

      nNew = nNew * 2;
    }
    pNew = sqlite3_realloc64(pBuf->p, nNew);
    if( pNew==0 ){
      *pRc = SQLITE_NOMEM;
      return 1;
    }else{
      pBuf->nSpace = (int)nNew;
      pBuf->p = pNew;
    }
  }
  return 0;
}


................................................................................
void *sqlite3Fts5MallocZero(int *pRc, sqlite3_int64 nByte){
  void *pRet = 0;
  if( *pRc==SQLITE_OK ){
    pRet = sqlite3_malloc64(nByte);
    if( pRet==0 ){
      if( nByte>0 ) *pRc = SQLITE_NOMEM;
    }else{
      memset(pRet, 0, (size_t)nByte);
    }
  }
  return pRet;
}

/*
** Return a nul-terminated copy of the string indicated by pIn. If nIn

          }
        }
        if( p==0 ){
          *pzErr = sqlite3_mprintf("parse error in tokenize directive");
          rc = SQLITE_ERROR;
        }else{
          rc = sqlite3Fts5GetTokenizer(pGlobal, 
              (const char**)azArg, nArg, &pConfig->pTok, &pConfig->pTokApi,
              pzErr
          );
        }
      }
    }

    sqlite3_free(azArg);
................................................................................
  assert( *pRc==SQLITE_OK );
  *pbQuoted = 0;
  *pzOut = 0;

  if( zOut==0 ){
    *pRc = SQLITE_NOMEM;
  }else{
    memcpy(zOut, zIn, nIn+1);
    if( fts5_isopenquote(zOut[0]) ){
      int ii = fts5Dequote(zOut);
      zRet = &zIn[ii];
      *pbQuoted = 1;
    }else{
      zRet = fts5ConfigSkipBareword(zIn);
      if( zRet ){

          }
        }
        if( p==0 ){
          *pzErr = sqlite3_mprintf("parse error in tokenize directive");
          rc = SQLITE_ERROR;
        }else{
          rc = sqlite3Fts5GetTokenizer(pGlobal, 
              (const char**)azArg, (int)nArg, &pConfig->pTok, &pConfig->pTokApi,
              pzErr
          );
        }
      }
    }

    sqlite3_free(azArg);
................................................................................
  assert( *pRc==SQLITE_OK );
  *pbQuoted = 0;
  *pzOut = 0;

  if( zOut==0 ){
    *pRc = SQLITE_NOMEM;
  }else{
    memcpy(zOut, zIn, (size_t)(nIn+1));
    if( fts5_isopenquote(zOut[0]) ){
      int ii = fts5Dequote(zOut);
      zRet = &zIn[ii];
      *pbQuoted = 1;
    }else{
      zRet = fts5ConfigSkipBareword(zIn);
      if( zRet ){

    if( pNear==0 ){
      sqlite3_int64 nByte;
      nByte = sizeof(Fts5ExprNearset) + SZALLOC * sizeof(Fts5ExprPhrase*);
      pRet = sqlite3_malloc64(nByte);
      if( pRet==0 ){
        pParse->rc = SQLITE_NOMEM;
      }else{
        memset(pRet, 0, nByte);
      }
    }else if( (pNear->nPhrase % SZALLOC)==0 ){
      int nNew = pNear->nPhrase + SZALLOC;
      sqlite3_int64 nByte;

      nByte = sizeof(Fts5ExprNearset) + nNew * sizeof(Fts5ExprPhrase*);
      pRet = (Fts5ExprNearset*)sqlite3_realloc64(pNear, nByte);
................................................................................
  if( pPhrase && pPhrase->nTerm>0 && (tflags & FTS5_TOKEN_COLOCATED) ){
    Fts5ExprTerm *pSyn;
    sqlite3_int64 nByte = sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer) + nToken+1;
    pSyn = (Fts5ExprTerm*)sqlite3_malloc64(nByte);
    if( pSyn==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memset(pSyn, 0, nByte);
      pSyn->zTerm = ((char*)pSyn) + sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer);
      memcpy(pSyn->zTerm, pToken, nToken);
      pSyn->pSynonym = pPhrase->aTerm[pPhrase->nTerm-1].pSynonym;
      pPhrase->aTerm[pPhrase->nTerm-1].pSynonym = pSyn;
    }
  }else{
    Fts5ExprTerm *pTerm;
................................................................................
    Fts5Colset *pColsetOrig = pOrig->pNode->pNear->pColset;
    if( pColsetOrig ){
      sqlite3_int64 nByte;
      Fts5Colset *pColset;
      nByte = sizeof(Fts5Colset) + (pColsetOrig->nCol-1) * sizeof(int);
      pColset = (Fts5Colset*)sqlite3Fts5MallocZero(&rc, nByte);
      if( pColset ){ 
        memcpy(pColset, pColsetOrig, nByte);
      }
      pNew->pRoot->pNear->pColset = pColset;
    }
  }

  if( pOrig->nTerm ){
    int i;                          /* Used to iterate through phrase terms */
................................................................................
*/
static Fts5Colset *fts5CloneColset(int *pRc, Fts5Colset *pOrig){
  Fts5Colset *pRet;
  if( pOrig ){
    sqlite3_int64 nByte = sizeof(Fts5Colset) + (pOrig->nCol-1) * sizeof(int);
    pRet = (Fts5Colset*)sqlite3Fts5MallocZero(pRc, nByte);
    if( pRet ){ 
      memcpy(pRet, pOrig, nByte);
    }
  }else{
    pRet = 0;
  }
  return pRet;
}

    if( pNear==0 ){
      sqlite3_int64 nByte;
      nByte = sizeof(Fts5ExprNearset) + SZALLOC * sizeof(Fts5ExprPhrase*);
      pRet = sqlite3_malloc64(nByte);
      if( pRet==0 ){
        pParse->rc = SQLITE_NOMEM;
      }else{
        memset(pRet, 0, (size_t)nByte);
      }
    }else if( (pNear->nPhrase % SZALLOC)==0 ){
      int nNew = pNear->nPhrase + SZALLOC;
      sqlite3_int64 nByte;

      nByte = sizeof(Fts5ExprNearset) + nNew * sizeof(Fts5ExprPhrase*);
      pRet = (Fts5ExprNearset*)sqlite3_realloc64(pNear, nByte);
................................................................................
  if( pPhrase && pPhrase->nTerm>0 && (tflags & FTS5_TOKEN_COLOCATED) ){
    Fts5ExprTerm *pSyn;
    sqlite3_int64 nByte = sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer) + nToken+1;
    pSyn = (Fts5ExprTerm*)sqlite3_malloc64(nByte);
    if( pSyn==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memset(pSyn, 0, (size_t)nByte);
      pSyn->zTerm = ((char*)pSyn) + sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer);
      memcpy(pSyn->zTerm, pToken, nToken);
      pSyn->pSynonym = pPhrase->aTerm[pPhrase->nTerm-1].pSynonym;
      pPhrase->aTerm[pPhrase->nTerm-1].pSynonym = pSyn;
    }
  }else{
    Fts5ExprTerm *pTerm;
................................................................................
    Fts5Colset *pColsetOrig = pOrig->pNode->pNear->pColset;
    if( pColsetOrig ){
      sqlite3_int64 nByte;
      Fts5Colset *pColset;
      nByte = sizeof(Fts5Colset) + (pColsetOrig->nCol-1) * sizeof(int);
      pColset = (Fts5Colset*)sqlite3Fts5MallocZero(&rc, nByte);
      if( pColset ){ 
        memcpy(pColset, pColsetOrig, (size_t)nByte);
      }
      pNew->pRoot->pNear->pColset = pColset;
    }
  }

  if( pOrig->nTerm ){
    int i;                          /* Used to iterate through phrase terms */
................................................................................
*/
static Fts5Colset *fts5CloneColset(int *pRc, Fts5Colset *pOrig){
  Fts5Colset *pRet;
  if( pOrig ){
    sqlite3_int64 nByte = sizeof(Fts5Colset) + (pOrig->nCol-1) * sizeof(int);
    pRet = (Fts5Colset*)sqlite3Fts5MallocZero(pRc, nByte);
    if( pRet ){ 
      memcpy(pRet, pOrig, (size_t)nByte);
    }
  }else{
    pRet = 0;
  }
  return pRet;
}

    nByte = sizeof(Fts5HashEntry*) * pNew->nSlot;
    pNew->aSlot = (Fts5HashEntry**)sqlite3_malloc64(nByte);
    if( pNew->aSlot==0 ){
      sqlite3_free(pNew);
      *ppNew = 0;
      rc = SQLITE_NOMEM;
    }else{
      memset(pNew->aSlot, 0, nByte);
    }
  }
  return rc;
}

/*
** Free a hash table object.
................................................................................

  sqlite3_free(apOld);
  pHash->nSlot = nNew;
  pHash->aSlot = apNew;
  return SQLITE_OK;
}

static void fts5HashAddPoslistSize(Fts5Hash *pHash, Fts5HashEntry *p){





  if( p->iSzPoslist ){
    u8 *pPtr = (u8*)p;

    if( pHash->eDetail==FTS5_DETAIL_NONE ){
      assert( p->nData==p->iSzPoslist );
      if( p->bDel ){
        pPtr[p->nData++] = 0x00;
        if( p->bContent ){
          pPtr[p->nData++] = 0x00;
        }
      }
    }else{
      int nSz = (p->nData - p->iSzPoslist - 1);       /* Size in bytes */
      int nPos = nSz*2 + p->bDel;                     /* Value of nPos field */

      assert( p->bDel==0 || p->bDel==1 );
      if( nPos<=127 ){
        pPtr[p->iSzPoslist] = (u8)nPos;
      }else{
        int nByte = sqlite3Fts5GetVarintLen((u32)nPos);
        memmove(&pPtr[p->iSzPoslist + nByte], &pPtr[p->iSzPoslist + 1], nSz);
        sqlite3Fts5PutVarint(&pPtr[p->iSzPoslist], nPos);
        p->nData += (nByte-1);
      }
    }



    p->iSzPoslist = 0;
    p->bDel = 0;
    p->bContent = 0;

  }


}

/*
** Add an entry to the in-memory hash table. The key is the concatenation
** of bByte and (pToken/nToken). The value is (iRowid/iCol/iPos).
**
**     (bByte || pToken) -> (iRowid,iCol,iPos)
................................................................................
      iHash = fts5HashKey2(pHash->nSlot, (u8)bByte, (const u8*)pToken, nToken);
    }

    /* Allocate new Fts5HashEntry and add it to the hash table. */
    p = (Fts5HashEntry*)sqlite3_malloc64(nByte);
    if( !p ) return SQLITE_NOMEM;
    memset(p, 0, sizeof(Fts5HashEntry));
    p->nAlloc = nByte;
    zKey = fts5EntryKey(p);
    zKey[0] = bByte;
    memcpy(&zKey[1], pToken, nToken);
    assert( iHash==fts5HashKey(pHash->nSlot, (u8*)zKey, nToken+1) );
    p->nKey = nToken;
    zKey[nToken+1] = '\0';
    p->nData = nToken+1 + 1 + sizeof(Fts5HashEntry);
................................................................................
  assert( (p->nAlloc - p->nData) >= (9 + 4 + 1 + 3 + 5) );

  pPtr = (u8*)p;

  /* If this is a new rowid, append the 4-byte size field for the previous
  ** entry, and the new rowid for this entry.  */
  if( iRowid!=p->iRowid ){
    fts5HashAddPoslistSize(pHash, p);
    p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iRowid - p->iRowid);
    p->iRowid = iRowid;
    bNew = 1;
    p->iSzPoslist = p->nData;
    if( pHash->eDetail!=FTS5_DETAIL_NONE ){
      p->nData += 1;
      p->iCol = (pHash->eDetail==FTS5_DETAIL_FULL ? 0 : -1);
................................................................................
  ap = sqlite3_malloc64(sizeof(Fts5HashEntry*) * nMergeSlot);
  if( !ap ) return SQLITE_NOMEM;
  memset(ap, 0, sizeof(Fts5HashEntry*) * nMergeSlot);

  for(iSlot=0; iSlot<pHash->nSlot; iSlot++){
    Fts5HashEntry *pIter;
    for(pIter=pHash->aSlot[iSlot]; pIter; pIter=pIter->pHashNext){

      if( pTerm==0 || 0==memcmp(fts5EntryKey(pIter), pTerm, nTerm) ){

        Fts5HashEntry *pEntry = pIter;
        pEntry->pScanNext = 0;
        for(i=0; ap[i]; i++){
          pEntry = fts5HashEntryMerge(pEntry, ap[i]);
          ap[i] = 0;
        }
        ap[i] = pEntry;
................................................................................
}

/*
** Query the hash table for a doclist associated with term pTerm/nTerm.
*/
int sqlite3Fts5HashQuery(
  Fts5Hash *pHash,                /* Hash table to query */

  const char *pTerm, int nTerm,   /* Query term */
  const u8 **ppDoclist,           /* OUT: Pointer to doclist for pTerm */

  int *pnDoclist                  /* OUT: Size of doclist in bytes */
){
  unsigned int iHash = fts5HashKey(pHash->nSlot, (const u8*)pTerm, nTerm);
  char *zKey = 0;
  Fts5HashEntry *p;

  for(p=pHash->aSlot[iHash]; p; p=p->pHashNext){
    zKey = fts5EntryKey(p);
    assert( p->nKey+1==(int)strlen(zKey) );
    if( nTerm==p->nKey+1 && memcmp(zKey, pTerm, nTerm)==0 ) break;
  }

  if( p ){






    fts5HashAddPoslistSize(pHash, p);


    *ppDoclist = (const u8*)&zKey[nTerm+1];
    *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1);


  }else{
    *ppDoclist = 0;
    *pnDoclist = 0;
  }

  return SQLITE_OK;
}

int sqlite3Fts5HashScanInit(
................................................................................
  const u8 **ppDoclist,           /* OUT: pointer to doclist */
  int *pnDoclist                  /* OUT: size of doclist in bytes */
){
  Fts5HashEntry *p;
  if( (p = pHash->pScan) ){
    char *zKey = fts5EntryKey(p);
    int nTerm = (int)strlen(zKey);
    fts5HashAddPoslistSize(pHash, p);
    *pzTerm = zKey;
    *ppDoclist = (const u8*)&zKey[nTerm+1];
    *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1);
  }else{
    *pzTerm = 0;
    *ppDoclist = 0;
    *pnDoclist = 0;
  }
}

    nByte = sizeof(Fts5HashEntry*) * pNew->nSlot;
    pNew->aSlot = (Fts5HashEntry**)sqlite3_malloc64(nByte);
    if( pNew->aSlot==0 ){
      sqlite3_free(pNew);
      *ppNew = 0;
      rc = SQLITE_NOMEM;
    }else{
      memset(pNew->aSlot, 0, (size_t)nByte);
    }
  }
  return rc;
}

/*
** Free a hash table object.
................................................................................

  sqlite3_free(apOld);
  pHash->nSlot = nNew;
  pHash->aSlot = apNew;
  return SQLITE_OK;
}

static int fts5HashAddPoslistSize(
  Fts5Hash *pHash, 
  Fts5HashEntry *p,
  Fts5HashEntry *p2
){
  int nRet = 0;
  if( p->iSzPoslist ){
    u8 *pPtr = p2 ? (u8*)p2 : (u8*)p;
    int nData = p->nData;
    if( pHash->eDetail==FTS5_DETAIL_NONE ){
      assert( nData==p->iSzPoslist );
      if( p->bDel ){
        pPtr[nData++] = 0x00;
        if( p->bContent ){
          pPtr[nData++] = 0x00;
        }
      }
    }else{
      int nSz = (nData - p->iSzPoslist - 1);       /* Size in bytes */
      int nPos = nSz*2 + p->bDel;                     /* Value of nPos field */

      assert( p->bDel==0 || p->bDel==1 );
      if( nPos<=127 ){
        pPtr[p->iSzPoslist] = (u8)nPos;
      }else{
        int nByte = sqlite3Fts5GetVarintLen((u32)nPos);
        memmove(&pPtr[p->iSzPoslist + nByte], &pPtr[p->iSzPoslist + 1], nSz);
        sqlite3Fts5PutVarint(&pPtr[p->iSzPoslist], nPos);
        nData += (nByte-1);
      }
    }

    nRet = nData - p->nData;
    if( p2==0 ){
      p->iSzPoslist = 0;
      p->bDel = 0;
      p->bContent = 0;
      p->nData = nData;
    }
  }
  return nRet;
}

/*
** Add an entry to the in-memory hash table. The key is the concatenation
** of bByte and (pToken/nToken). The value is (iRowid/iCol/iPos).
**
**     (bByte || pToken) -> (iRowid,iCol,iPos)
................................................................................
      iHash = fts5HashKey2(pHash->nSlot, (u8)bByte, (const u8*)pToken, nToken);
    }

    /* Allocate new Fts5HashEntry and add it to the hash table. */
    p = (Fts5HashEntry*)sqlite3_malloc64(nByte);
    if( !p ) return SQLITE_NOMEM;
    memset(p, 0, sizeof(Fts5HashEntry));
    p->nAlloc = (int)nByte;
    zKey = fts5EntryKey(p);
    zKey[0] = bByte;
    memcpy(&zKey[1], pToken, nToken);
    assert( iHash==fts5HashKey(pHash->nSlot, (u8*)zKey, nToken+1) );
    p->nKey = nToken;
    zKey[nToken+1] = '\0';
    p->nData = nToken+1 + 1 + sizeof(Fts5HashEntry);
................................................................................
  assert( (p->nAlloc - p->nData) >= (9 + 4 + 1 + 3 + 5) );

  pPtr = (u8*)p;

  /* If this is a new rowid, append the 4-byte size field for the previous
  ** entry, and the new rowid for this entry.  */
  if( iRowid!=p->iRowid ){
    fts5HashAddPoslistSize(pHash, p, 0);
    p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iRowid - p->iRowid);
    p->iRowid = iRowid;
    bNew = 1;
    p->iSzPoslist = p->nData;
    if( pHash->eDetail!=FTS5_DETAIL_NONE ){
      p->nData += 1;
      p->iCol = (pHash->eDetail==FTS5_DETAIL_FULL ? 0 : -1);
................................................................................
  ap = sqlite3_malloc64(sizeof(Fts5HashEntry*) * nMergeSlot);
  if( !ap ) return SQLITE_NOMEM;
  memset(ap, 0, sizeof(Fts5HashEntry*) * nMergeSlot);

  for(iSlot=0; iSlot<pHash->nSlot; iSlot++){
    Fts5HashEntry *pIter;
    for(pIter=pHash->aSlot[iSlot]; pIter; pIter=pIter->pHashNext){
      if( pTerm==0 
       || (pIter->nKey+1>=nTerm && 0==memcmp(fts5EntryKey(pIter), pTerm, nTerm))
      ){
        Fts5HashEntry *pEntry = pIter;
        pEntry->pScanNext = 0;
        for(i=0; ap[i]; i++){
          pEntry = fts5HashEntryMerge(pEntry, ap[i]);
          ap[i] = 0;
        }
        ap[i] = pEntry;
................................................................................
}

/*
** Query the hash table for a doclist associated with term pTerm/nTerm.
*/
int sqlite3Fts5HashQuery(
  Fts5Hash *pHash,                /* Hash table to query */
  int nPre,
  const char *pTerm, int nTerm,   /* Query term */

  void **ppOut,                   /* OUT: Pointer to new object */
  int *pnDoclist                  /* OUT: Size of doclist in bytes */
){
  unsigned int iHash = fts5HashKey(pHash->nSlot, (const u8*)pTerm, nTerm);
  char *zKey = 0;
  Fts5HashEntry *p;

  for(p=pHash->aSlot[iHash]; p; p=p->pHashNext){
    zKey = fts5EntryKey(p);
    assert( p->nKey+1==(int)strlen(zKey) );
    if( nTerm==p->nKey+1 && memcmp(zKey, pTerm, nTerm)==0 ) break;
  }

  if( p ){
    int nHashPre = sizeof(Fts5HashEntry) + nTerm + 1;
    int nList = p->nData - nHashPre;
    u8 *pRet = (u8*)(*ppOut = sqlite3_malloc64(nPre + nList + 10));
    if( pRet ){
      Fts5HashEntry *pFaux = (Fts5HashEntry*)&pRet[nPre-nHashPre];
      memcpy(&pRet[nPre], &((u8*)p)[nHashPre], nList);
      nList += fts5HashAddPoslistSize(pHash, p, pFaux);
      *pnDoclist = nList;
    }else{
      *pnDoclist = 0;

      return SQLITE_NOMEM;
    }
  }else{
    *ppOut = 0;
    *pnDoclist = 0;
  }

  return SQLITE_OK;
}

int sqlite3Fts5HashScanInit(
................................................................................
  const u8 **ppDoclist,           /* OUT: pointer to doclist */
  int *pnDoclist                  /* OUT: size of doclist in bytes */
){
  Fts5HashEntry *p;
  if( (p = pHash->pScan) ){
    char *zKey = fts5EntryKey(p);
    int nTerm = (int)strlen(zKey);
    fts5HashAddPoslistSize(pHash, p, 0);
    *pzTerm = zKey;
    *ppDoclist = (const u8*)&zKey[nTerm+1];
    *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1);
  }else{
    *pzTerm = 0;
    *ppDoclist = 0;
    *pnDoclist = 0;
  }
}

*/
static void fts5SegIterHashInit(
  Fts5Index *p,                   /* FTS5 backend */
  const u8 *pTerm, int nTerm,     /* Term to seek to */
  int flags,                      /* Mask of FTS5INDEX_XXX flags */
  Fts5SegIter *pIter              /* Object to populate */
){
  const u8 *pList = 0;
  int nList = 0;
  const u8 *z = 0;
  int n = 0;


  assert( p->pHash );
  assert( p->rc==SQLITE_OK );

  if( pTerm==0 || (flags & FTS5INDEX_QUERY_SCAN) ){


    p->rc = sqlite3Fts5HashScanInit(p->pHash, (const char*)pTerm, nTerm);
    sqlite3Fts5HashScanEntry(p->pHash, (const char**)&z, &pList, &nList);
    n = (z ? (int)strlen((const char*)z) : 0);






  }else{
    pIter->flags |= FTS5_SEGITER_ONETERM;
    sqlite3Fts5HashQuery(p->pHash, (const char*)pTerm, nTerm, &pList, &nList);





    z = pTerm;
    n = nTerm;

  }

  if( pList ){
    Fts5Data *pLeaf;
    sqlite3Fts5BufferSet(&p->rc, &pIter->term, n, z);
    pLeaf = fts5IdxMalloc(p, sizeof(Fts5Data));
    if( pLeaf==0 ) return;
    pLeaf->p = (u8*)pList;
    pLeaf->nn = pLeaf->szLeaf = nList;
    pIter->pLeaf = pLeaf;
    pIter->iLeafOffset = fts5GetVarint(pLeaf->p, (u64*)&pIter->iRowid);
    pIter->iEndofDoclist = pLeaf->nn;

    if( flags & FTS5INDEX_QUERY_DESC ){
      pIter->flags |= FTS5_SEGITER_REVERSE;

*/
static void fts5SegIterHashInit(
  Fts5Index *p,                   /* FTS5 backend */
  const u8 *pTerm, int nTerm,     /* Term to seek to */
  int flags,                      /* Mask of FTS5INDEX_XXX flags */
  Fts5SegIter *pIter              /* Object to populate */
){

  int nList = 0;
  const u8 *z = 0;
  int n = 0;
  Fts5Data *pLeaf = 0;

  assert( p->pHash );
  assert( p->rc==SQLITE_OK );

  if( pTerm==0 || (flags & FTS5INDEX_QUERY_SCAN) ){
    const u8 *pList = 0;

    p->rc = sqlite3Fts5HashScanInit(p->pHash, (const char*)pTerm, nTerm);
    sqlite3Fts5HashScanEntry(p->pHash, (const char**)&z, &pList, &nList);
    n = (z ? (int)strlen((const char*)z) : 0);
    if( pList ){
      pLeaf = fts5IdxMalloc(p, sizeof(Fts5Data));
      if( pLeaf ){
        pLeaf->p = (u8*)pList;
      }
    }
  }else{

    p->rc = sqlite3Fts5HashQuery(p->pHash, sizeof(Fts5Data), 
        (const char*)pTerm, nTerm, (void**)&pLeaf, &nList
    );
    if( pLeaf ){
      pLeaf->p = (u8*)&pLeaf[1];
    }
    z = pTerm;
    n = nTerm;
    pIter->flags |= FTS5_SEGITER_ONETERM;
  }

  if( pLeaf ){

    sqlite3Fts5BufferSet(&p->rc, &pIter->term, n, z);



    pLeaf->nn = pLeaf->szLeaf = nList;
    pIter->pLeaf = pLeaf;
    pIter->iLeafOffset = fts5GetVarint(pLeaf->p, (u64*)&pIter->iRowid);
    pIter->iEndofDoclist = pLeaf->nn;

    if( flags & FTS5INDEX_QUERY_DESC ){
      pIter->flags |= FTS5_SEGITER_REVERSE;

  rc = fts5NewTransaction(pTab);
  if( rc==SQLITE_OK ){
    nByte = sizeof(Fts5Cursor) + pConfig->nCol * sizeof(int);
    pCsr = (Fts5Cursor*)sqlite3_malloc64(nByte);
    if( pCsr ){
      Fts5Global *pGlobal = pTab->pGlobal;
      memset(pCsr, 0, nByte);
      pCsr->aColumnSize = (int*)&pCsr[1];
      pCsr->pNext = pGlobal->pCsr;
      pGlobal->pCsr = pCsr;
      pCsr->iCsrId = ++pGlobal->iNextId;
    }else{
      rc = SQLITE_NOMEM;
    }
................................................................................
  const char *zRank = pCsr->zRank;
  const char *zRankArgs = pCsr->zRankArgs;
  
  nPhrase = sqlite3Fts5ExprPhraseCount(pCsr->pExpr);
  nByte = sizeof(Fts5Sorter) + sizeof(int) * (nPhrase-1);
  pSorter = (Fts5Sorter*)sqlite3_malloc64(nByte);
  if( pSorter==0 ) return SQLITE_NOMEM;
  memset(pSorter, 0, nByte);
  pSorter->nIdx = nPhrase;

  /* TODO: It would be better to have some system for reusing statement
  ** handles here, rather than preparing a new one for each query. But that
  ** is not possible as SQLite reference counts the virtual table objects.
  ** And since the statement required here reads from this very virtual 
  ** table, saving it creates a circular reference.

  rc = fts5NewTransaction(pTab);
  if( rc==SQLITE_OK ){
    nByte = sizeof(Fts5Cursor) + pConfig->nCol * sizeof(int);
    pCsr = (Fts5Cursor*)sqlite3_malloc64(nByte);
    if( pCsr ){
      Fts5Global *pGlobal = pTab->pGlobal;
      memset(pCsr, 0, (size_t)nByte);
      pCsr->aColumnSize = (int*)&pCsr[1];
      pCsr->pNext = pGlobal->pCsr;
      pGlobal->pCsr = pCsr;
      pCsr->iCsrId = ++pGlobal->iNextId;
    }else{
      rc = SQLITE_NOMEM;
    }
................................................................................
  const char *zRank = pCsr->zRank;
  const char *zRankArgs = pCsr->zRankArgs;
  
  nPhrase = sqlite3Fts5ExprPhraseCount(pCsr->pExpr);
  nByte = sizeof(Fts5Sorter) + sizeof(int) * (nPhrase-1);
  pSorter = (Fts5Sorter*)sqlite3_malloc64(nByte);
  if( pSorter==0 ) return SQLITE_NOMEM;
  memset(pSorter, 0, (size_t)nByte);
  pSorter->nIdx = nPhrase;

  /* TODO: It would be better to have some system for reusing statement
  ** handles here, rather than preparing a new one for each query. But that
  ** is not possible as SQLite reference counts the virtual table objects.
  ** And since the statement required here reads from this very virtual 
  ** table, saving it creates a circular reference.

  sqlite3_int64 nByte;            /* Bytes of space to allocate */

  nByte = sizeof(Fts5Storage)               /* Fts5Storage object */
        + pConfig->nCol * sizeof(i64);      /* Fts5Storage.aTotalSize[] */
  *pp = p = (Fts5Storage*)sqlite3_malloc64(nByte);
  if( !p ) return SQLITE_NOMEM;

  memset(p, 0, nByte);
  p->aTotalSize = (i64*)&p[1];
  p->pConfig = pConfig;
  p->pIndex = pIndex;

  if( bCreate ){
    if( pConfig->eContent==FTS5_CONTENT_NORMAL ){
      int nDefn = 32 + pConfig->nCol*10;

  sqlite3_int64 nByte;            /* Bytes of space to allocate */

  nByte = sizeof(Fts5Storage)               /* Fts5Storage object */
        + pConfig->nCol * sizeof(i64);      /* Fts5Storage.aTotalSize[] */
  *pp = p = (Fts5Storage*)sqlite3_malloc64(nByte);
  if( !p ) return SQLITE_NOMEM;

  memset(p, 0, (size_t)nByte);
  p->aTotalSize = (i64*)&p[1];
  p->pConfig = pConfig;
  p->pIndex = pIndex;

  if( bCreate ){
    if( pConfig->eContent==FTS5_CONTENT_NORMAL ){
      int nDefn = 32 + pConfig->nCol*10;

void sqlite3Fts5UnicodeAscii(u8 *aArray, u8 *aAscii){
  int i = 0;
  int iTbl = 0;
  while( i<128 ){
    int bToken = aArray[ aFts5UnicodeData[iTbl] & 0x1F ];
    int n = (aFts5UnicodeData[iTbl] >> 5) + i;
    for(; i<128 && i<n; i++){
      aAscii[i] = bToken;
    }
    iTbl++;
  }
}

void sqlite3Fts5UnicodeAscii(u8 *aArray, u8 *aAscii){
  int i = 0;
  int iTbl = 0;
  while( i<128 ){
    int bToken = aArray[ aFts5UnicodeData[iTbl] & 0x1F ];
    int n = (aFts5UnicodeData[iTbl] >> 5) + i;
    for(; i<128 && i<n; i++){
      aAscii[i] = (u8)bToken;
    }
    iTbl++;
  }
}

  INSERT INTO n1 VALUES('a b c d');
}

proc funk {} {
  db eval { UPDATE n1_config SET v=50 WHERE k='version' }
  set fd [db incrblob main n1_data block 10]
  fconfigure $fd -encoding binary -translation binary
  puts -nonewline $fd "\x44\x45"
  close $fd
}
db func funk funk

# This test case corrupts the structure record within the first invocation
# of function funk(). Which used to cause the bm25() function to throw an
# exception. But since bm25() can now used the cached structure record,
................................................................................
}
do_execsql_test 23.1 {
  SELECT * FROM t11, t10 WHERE t11.x = t10.x AND t10.rowid IS NULL;
}
do_execsql_test 23.2 {
  SELECT * FROM t11, t10 WHERE t10.rowid IS NULL;
}

































}

expand_all_sql db
finish_test

  INSERT INTO n1 VALUES('a b c d');
}

proc funk {} {
  db eval { UPDATE n1_config SET v=50 WHERE k='version' }
  set fd [db incrblob main n1_data block 10]
  fconfigure $fd -encoding binary -translation binary
#  puts -nonewline $fd "\x44\x45"
  close $fd
}
db func funk funk

# This test case corrupts the structure record within the first invocation
# of function funk(). Which used to cause the bm25() function to throw an
# exception. But since bm25() can now used the cached structure record,
................................................................................
}
do_execsql_test 23.1 {
  SELECT * FROM t11, t10 WHERE t11.x = t10.x AND t10.rowid IS NULL;
}
do_execsql_test 23.2 {
  SELECT * FROM t11, t10 WHERE t10.rowid IS NULL;
}

#-------------------------------------------------------------------------
do_execsql_test 24.0 {
  CREATE VIRTUAL TABLE t12 USING fts5(x, detail=%DETAIL%);
  INSERT INTO t12 VALUES('aaaa');
}
do_execsql_test 24.1 {
  BEGIN;
    DELETE FROM t12 WHERE rowid=1;
    SELECT * FROM t12('aaaa');
    INSERT INTO t12 VALUES('aaaa');
  END;
}
do_execsql_test 24.2 {
  INSERT INTO t12(t12) VALUES('integrity-check');
}
do_execsql_test 24.3 {
    SELECT * FROM t12('aaaa');
} {aaaa}

#-------------------------------------------------------------------------
do_execsql_test 25.0 {
  CREATE VIRTUAL TABLE t13 USING fts5(x, detail=%DETAIL%);
}
do_execsql_test 25.1 {
  BEGIN;
  INSERT INTO t13 VALUES('AAAA');
SELECT * FROM t13('BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB*');

  END;
}


}

expand_all_sql db
finish_test

  nIn = strlen(zIn);
  zOut = sqlite3_malloc64(nIn+1);
  if( zOut ){
    char q = zIn[0];              /* Quote character (if any ) */

    if( q!='[' && q!= '\'' && q!='"' && q!='`' ){
      memcpy(zOut, zIn, nIn+1);
    }else{
      int iOut = 0;               /* Index of next byte to write to output */
      int iIn;                    /* Index of next byte to read from input */

      if( q=='[' ) q = ']';
      for(iIn=1; iIn<nIn; iIn++){
        if( zIn[iIn]==q ) iIn++;

  nIn = strlen(zIn);
  zOut = sqlite3_malloc64(nIn+1);
  if( zOut ){
    char q = zIn[0];              /* Quote character (if any ) */

    if( q!='[' && q!= '\'' && q!='"' && q!='`' ){
      memcpy(zOut, zIn, (size_t)(nIn+1));
    }else{
      int iOut = 0;               /* Index of next byte to write to output */
      int iIn;                    /* Index of next byte to read from input */

      if( q=='[' ) q = ']';
      for(iIn=1; iIn<nIn; iIn++){
        if( zIn[iIn]==q ) iIn++;

  nIn = strlen(zIn);
  zOut = sqlite3_malloc64(nIn+1);
  if( zOut ){
    char q = zIn[0];              /* Quote character (if any ) */

    if( q!='[' && q!= '\'' && q!='"' && q!='`' ){
      memcpy(zOut, zIn, nIn+1);
    }else{
      int iOut = 0;               /* Index of next byte to write to output */
      int iIn;                    /* Index of next byte to read from input */

      if( q=='[' ) q = ']';
      for(iIn=1; iIn<nIn; iIn++){
        if( zIn[iIn]==q ) iIn++;

  nIn = strlen(zIn);
  zOut = sqlite3_malloc64(nIn+1);
  if( zOut ){
    char q = zIn[0];              /* Quote character (if any ) */

    if( q!='[' && q!= '\'' && q!='"' && q!='`' ){
      memcpy(zOut, zIn, (size_t)(nIn+1));
    }else{
      int iOut = 0;               /* Index of next byte to write to output */
      int iIn;                    /* Index of next byte to read from input */

      if( q=='[' ) q = ']';
      for(iIn=1; iIn<nIn; iIn++){
        if( zIn[iIn]==q ) iIn++;

  }
  pBuf = sqlite3_malloc64( nIn ? nIn : 1 );
  if( pBuf==0 ){
    sqlite3_result_error_nomem(ctx);
    fclose(in);
    return;
  }
  if( nIn==fread(pBuf, 1, nIn, in) ){
    sqlite3_result_blob64(ctx, pBuf, nIn, sqlite3_free);
  }else{
    sqlite3_result_error_code(ctx, SQLITE_IOERR);
    sqlite3_free(pBuf);
  }
  fclose(in);
}

  }
  pBuf = sqlite3_malloc64( nIn ? nIn : 1 );
  if( pBuf==0 ){
    sqlite3_result_error_nomem(ctx);
    fclose(in);
    return;
  }
  if( nIn==fread(pBuf, 1, (size_t)nIn, in) ){
    sqlite3_result_blob64(ctx, pBuf, nIn, sqlite3_free);
  }else{
    sqlite3_result_error_code(ctx, SQLITE_IOERR);
    sqlite3_free(pBuf);
  }
  fclose(in);
}

  nIn = strlen(zIn);
  zOut = sqlite3_malloc64(nIn+1);
  if( zOut ){
    char q = zIn[0];              /* Quote character (if any ) */

    if( q!='[' && q!= '\'' && q!='"' && q!='`' ){
      memcpy(zOut, zIn, nIn+1);
    }else{
      int iOut = 0;               /* Index of next byte to write to output */
      int iIn;                    /* Index of next byte to read from input */

      if( q=='[' ) q = ']';
      for(iIn=1; iIn<nIn; iIn++){
        if( zIn[iIn]==q ) iIn++;
................................................................................
    if( pNew==0 ){
      rc = SQLITE_NOMEM;
    }else{
      char *zTab;                 /* Dequoted name of fuzzer data table */

      memset(pNew, 0, sizeof(*pNew));
      pNew->zClassName = (char*)&pNew[1];
      memcpy(pNew->zClassName, zModule, nModule+1);

      zTab = fuzzerDequote(argv[3]);
      if( zTab==0 ){
        rc = SQLITE_NOMEM;
      }else{
        rc = fuzzerLoadRules(db, pNew, zDb, zTab, pzErr);
        sqlite3_free(zTab);

  nIn = strlen(zIn);
  zOut = sqlite3_malloc64(nIn+1);
  if( zOut ){
    char q = zIn[0];              /* Quote character (if any ) */

    if( q!='[' && q!= '\'' && q!='"' && q!='`' ){
      memcpy(zOut, zIn, (size_t)(nIn+1));
    }else{
      int iOut = 0;               /* Index of next byte to write to output */
      int iIn;                    /* Index of next byte to read from input */

      if( q=='[' ) q = ']';
      for(iIn=1; iIn<nIn; iIn++){
        if( zIn[iIn]==q ) iIn++;
................................................................................
    if( pNew==0 ){
      rc = SQLITE_NOMEM;
    }else{
      char *zTab;                 /* Dequoted name of fuzzer data table */

      memset(pNew, 0, sizeof(*pNew));
      pNew->zClassName = (char*)&pNew[1];
      memcpy(pNew->zClassName, zModule, (size_t)(nModule+1));

      zTab = fuzzerDequote(argv[3]);
      if( zTab==0 ){
        rc = SQLITE_NOMEM;
      }else{
        rc = fuzzerLoadRules(db, pNew, zDb, zTab, pzErr);
        sqlite3_free(zTab);

*/
static void *unionMalloc(int *pRc, sqlite3_int64 nByte){
  void *pRet;
  assert( nByte>0 );
  if( *pRc==SQLITE_OK ){
    pRet = sqlite3_malloc64(nByte);
    if( pRet ){
      memset(pRet, 0, nByte);
    }else{
      *pRc = SQLITE_NOMEM;
    }
  }else{
    pRet = 0;
  }
  return pRet;
................................................................................
*/
static char *unionStrdup(int *pRc, const char *zIn){
  char *zRet = 0;
  if( zIn ){
    sqlite3_int64 nByte = strlen(zIn) + 1;
    zRet = unionMalloc(pRc, nByte);
    if( zRet ){
      memcpy(zRet, zIn, nByte);
    }
  }
  return zRet;
}

/*
** If the first character of the string passed as the only argument to this

*/
static void *unionMalloc(int *pRc, sqlite3_int64 nByte){
  void *pRet;
  assert( nByte>0 );
  if( *pRc==SQLITE_OK ){
    pRet = sqlite3_malloc64(nByte);
    if( pRet ){
      memset(pRet, 0, (size_t)nByte);
    }else{
      *pRc = SQLITE_NOMEM;
    }
  }else{
    pRet = 0;
  }
  return pRet;
................................................................................
*/
static char *unionStrdup(int *pRc, const char *zIn){
  char *zRet = 0;
  if( zIn ){
    sqlite3_int64 nByte = strlen(zIn) + 1;
    zRet = unionMalloc(pRc, nByte);
    if( zRet ){
      memcpy(zRet, zIn, (size_t)nByte);
    }
  }
  return zRet;
}

/*
** If the first character of the string passed as the only argument to this

**
** The human readable string takes the form of a Tcl list with one
** entry for each cell in the r-tree node. Each entry is itself a
** list, containing the 8-byte rowid/pageno followed by the 
** <num-dimension>*2 coordinates.
*/
static void rtreenode(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){
  char *zText = 0;
  RtreeNode node;
  Rtree tree;
  int ii;




  UNUSED_PARAMETER(nArg);
  memset(&node, 0, sizeof(RtreeNode));
  memset(&tree, 0, sizeof(Rtree));
  tree.nDim = (u8)sqlite3_value_int(apArg[0]);

  tree.nDim2 = tree.nDim*2;
  tree.nBytesPerCell = 8 + 8 * tree.nDim;
  node.zData = (u8 *)sqlite3_value_blob(apArg[1]);





  for(ii=0; ii<NCELL(&node); ii++){
    char zCell[512];
    int nCell = 0;
    RtreeCell cell;
    int jj;

    nodeGetCell(&tree, &node, ii, &cell);

    sqlite3_snprintf(512-nCell,&zCell[nCell],"%lld", cell.iRowid);
    nCell = (int)strlen(zCell);
    for(jj=0; jj<tree.nDim2; jj++){
#ifndef SQLITE_RTREE_INT_ONLY
      sqlite3_snprintf(512-nCell,&zCell[nCell], " %g",
                       (double)cell.aCoord[jj].f);
#else
      sqlite3_snprintf(512-nCell,&zCell[nCell], " %d",
                       cell.aCoord[jj].i);
#endif
      nCell = (int)strlen(zCell);
    }


    if( zText ){
      char *zTextNew = sqlite3_mprintf("%s {%s}", zText, zCell);
      sqlite3_free(zText);
      zText = zTextNew;
    }else{
      zText = sqlite3_mprintf("{%s}", zCell);
    }
  }
  

  sqlite3_result_text(ctx, zText, -1, sqlite3_free);

}

/* This routine implements an SQL function that returns the "depth" parameter
** from the front of a blob that is an r-tree node.  For example:
**
**     SELECT rtreedepth(data) FROM rt_node WHERE nodeno=1;
**

**
** The human readable string takes the form of a Tcl list with one
** entry for each cell in the r-tree node. Each entry is itself a
** list, containing the 8-byte rowid/pageno followed by the 
** <num-dimension>*2 coordinates.
*/
static void rtreenode(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){

  RtreeNode node;
  Rtree tree;
  int ii;
  int nData;
  int errCode;
  sqlite3_str *pOut;

  UNUSED_PARAMETER(nArg);
  memset(&node, 0, sizeof(RtreeNode));
  memset(&tree, 0, sizeof(Rtree));
  tree.nDim = (u8)sqlite3_value_int(apArg[0]);
  if( tree.nDim<1 || tree.nDim>5 ) return;
  tree.nDim2 = tree.nDim*2;
  tree.nBytesPerCell = 8 + 8 * tree.nDim;
  node.zData = (u8 *)sqlite3_value_blob(apArg[1]);
  nData = sqlite3_value_bytes(apArg[1]);
  if( nData<4 ) return;
  if( nData<NCELL(&node)*tree.nBytesPerCell ) return;

  pOut = sqlite3_str_new(0);
  for(ii=0; ii<NCELL(&node); ii++){


    RtreeCell cell;
    int jj;

    nodeGetCell(&tree, &node, ii, &cell);
    if( ii>0 ) sqlite3_str_append(pOut, " ", 1);
    sqlite3_str_appendf(pOut, "{%lld", cell.iRowid);

    for(jj=0; jj<tree.nDim2; jj++){
#ifndef SQLITE_RTREE_INT_ONLY

      sqlite3_str_appendf(pOut, " %g", (double)cell.aCoord[jj].f);
#else

      sqlite3_str_appendf(pOut, " %d", cell.aCoord[jj].i);
#endif

    }
    sqlite3_str_append(pOut, "}", 1);
  }









  errCode = sqlite3_str_errcode(pOut);
  sqlite3_result_text(ctx, sqlite3_str_finish(pOut), -1, sqlite3_free);
  sqlite3_result_error_code(ctx, errCode);
}

/* This routine implements an SQL function that returns the "depth" parameter
** from the front of a blob that is an r-tree node.  For example:
**
**     SELECT rtreedepth(data) FROM rt_node WHERE nodeno=1;
**

  }
  fseek(f, 0, SEEK_END);
  sz = ftell(f);
  rewind(f);
  pBuf = sqlite3_malloc64( sz ? sz : 1 );
  if( pBuf==0 ){
    fprintf(stderr, "cannot allocate %d to hold content of \"%s\"\n",
            sz, zFilename);
    exit(1);
  }
  if( sz>0 ){
    if( fread(pBuf, sz, 1, f)!=1 ){
      fprintf(stderr, "cannot read all %d bytes of \"%s\"\n", sz, zFilename);

      exit(1);
    }
    fclose(f);
  }
  *pSz = sz;
  *ppBuf = pBuf;
}

/* Array for converting from half-bytes (nybbles) into ASCII hex
** digits. */
static const char hexdigits[] = {
  '0', '1', '2', '3', '4', '5', '6', '7',

  }
  fseek(f, 0, SEEK_END);
  sz = ftell(f);
  rewind(f);
  pBuf = sqlite3_malloc64( sz ? sz : 1 );
  if( pBuf==0 ){
    fprintf(stderr, "cannot allocate %d to hold content of \"%s\"\n",
            (int)sz, zFilename);
    exit(1);
  }
  if( sz>0 ){
    if( fread(pBuf, (size_t)sz, 1, f)!=1 ){
      fprintf(stderr, "cannot read all %d bytes of \"%s\"\n",
              (int)sz, zFilename);
      exit(1);
    }
    fclose(f);
  }
  *pSz = (int)sz;
  *ppBuf = pBuf;
}

/* Array for converting from half-bytes (nybbles) into ASCII hex
** digits. */
static const char hexdigits[] = {
  '0', '1', '2', '3', '4', '5', '6', '7',

    pVTab = sqlite3GetVTable(db, pTab);
    if( pVTab->pVtab->pModule->xRename==0 ){
      pVTab = 0;
    }
  }
#endif

  /* Begin a transaction for database iDb. 
  ** Then modify the schema cookie (since the ALTER TABLE modifies the
  ** schema). Open a statement transaction if the table is a virtual
  ** table.
  */
  v = sqlite3GetVdbe(pParse);
  if( v==0 ){
    goto exit_rename_table;
  }


  /* figure out how many UTF-8 characters are in zName */
  zTabName = pTab->zName;
  nTabName = sqlite3Utf8CharLen(zTabName, -1);

  /* Rewrite all CREATE TABLE, INDEX, TRIGGER or VIEW statements in
  ** the schema to use the new table name.  */
................................................................................
  ** SQLite tables) that are identified by the name of the virtual table.
  */
#ifndef SQLITE_OMIT_VIRTUALTABLE
  if( pVTab ){
    int i = ++pParse->nMem;
    sqlite3VdbeLoadString(v, i, zName);
    sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB);
    sqlite3MayAbort(pParse);
  }
#endif

  renameReloadSchema(pParse, iDb);
  renameTestSchema(pParse, zDb, iDb==1);

exit_rename_table:
................................................................................
    goto exit_rename_column;
  }

  /* Do the rename operation using a recursive UPDATE statement that
  ** uses the sqlite_rename_column() SQL function to compute the new
  ** CREATE statement text for the sqlite_master table.
  */

  zNew = sqlite3NameFromToken(db, pNew);
  if( !zNew ) goto exit_rename_column;
  assert( pNew->n>0 );
  bQuote = sqlite3Isquote(pNew->z[0]);
  sqlite3NestedParse(pParse, 
      "UPDATE \"%w\".%s SET "
      "sql = sqlite_rename_column(sql, type, name, %Q, %Q, %d, %Q, %d, %d) "

    pVTab = sqlite3GetVTable(db, pTab);
    if( pVTab->pVtab->pModule->xRename==0 ){
      pVTab = 0;
    }
  }
#endif

  /* Begin a transaction for database iDb. Then modify the schema cookie
  ** (since the ALTER TABLE modifies the schema). Call sqlite3MayAbort(),
  ** as the scalar functions (e.g. sqlite_rename_table()) invoked by the 
  ** nested SQL may raise an exception.  */

  v = sqlite3GetVdbe(pParse);
  if( v==0 ){
    goto exit_rename_table;
  }
  sqlite3MayAbort(pParse);

  /* figure out how many UTF-8 characters are in zName */
  zTabName = pTab->zName;
  nTabName = sqlite3Utf8CharLen(zTabName, -1);

  /* Rewrite all CREATE TABLE, INDEX, TRIGGER or VIEW statements in
  ** the schema to use the new table name.  */
................................................................................
  ** SQLite tables) that are identified by the name of the virtual table.
  */
#ifndef SQLITE_OMIT_VIRTUALTABLE
  if( pVTab ){
    int i = ++pParse->nMem;
    sqlite3VdbeLoadString(v, i, zName);
    sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB);

  }
#endif

  renameReloadSchema(pParse, iDb);
  renameTestSchema(pParse, zDb, iDb==1);

exit_rename_table:
................................................................................
    goto exit_rename_column;
  }

  /* Do the rename operation using a recursive UPDATE statement that
  ** uses the sqlite_rename_column() SQL function to compute the new
  ** CREATE statement text for the sqlite_master table.
  */
  sqlite3MayAbort(pParse);
  zNew = sqlite3NameFromToken(db, pNew);
  if( !zNew ) goto exit_rename_column;
  assert( pNew->n>0 );
  bQuote = sqlite3Isquote(pNew->z[0]);
  sqlite3NestedParse(pParse, 
      "UPDATE \"%w\".%s SET "
      "sql = sqlite_rename_column(sql, type, name, %Q, %Q, %d, %Q, %d, %d) "

  /* If the file was opened successfully, read the schema for the new database.
  ** If this fails, or if opening the file failed, then close the file and 
  ** remove the entry from the db->aDb[] array. i.e. put everything back the
  ** way we found it.
  */
  if( rc==SQLITE_OK ){
    db->init.iDb = 0;
    if( !IsReuseSchema(db) ){
      db->mDbFlags &= ~(DBFLAG_SchemaKnownOk);

      sqlite3BtreeEnterAll(db);
      rc = sqlite3Init(db, &zErrDyn);
      sqlite3BtreeLeaveAll(db);
      assert( zErrDyn==0 || rc!=SQLITE_OK );
    }
  }
#ifdef SQLITE_USER_AUTHENTICATION

  /* If the file was opened successfully, read the schema for the new database.
  ** If this fails, or if opening the file failed, then close the file and 
  ** remove the entry from the db->aDb[] array. i.e. put everything back the
  ** way we found it.
  */
  if( rc==SQLITE_OK ){
    db->init.iDb = 0;

    db->mDbFlags &= ~(DBFLAG_SchemaKnownOk);
    if( !IsReuseSchema(db) && !REOPEN_AS_MEMDB(db) ){
      sqlite3BtreeEnterAll(db);
      rc = sqlite3Init(db, &zErrDyn);
      sqlite3BtreeLeaveAll(db);
      assert( zErrDyn==0 || rc!=SQLITE_OK );
    }
  }
#ifdef SQLITE_USER_AUTHENTICATION

        ** for the portion used by the new allocation. */
        put2byte(&aData[pc+2], x);
      }
      return &aData[pc + x];
    }
    iAddr = pc;
    pc = get2byte(&aData[pc]);
    if( pc<iAddr+size ){
      if( pc ){
        /* The next slot in the chain is not past the end of the current slot */
        *pRc = SQLITE_CORRUPT_PAGE(pPg);
      }
      return 0;
    }
  }
................................................................................
  }
  testcase( pPage->nCell==MX_CELL(pBt) );
  /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only
  ** possible for a root page of a table that contains no rows) then the
  ** offset to the cell content area will equal the page size minus the
  ** bytes of reserved space. */
  assert( pPage->nCell>0
       || get2byteNotZero(&data[5])==pBt->usableSize
       || CORRUPT_DB );
  pPage->nFree = -1;  /* Indicate that this value is yet uncomputed */
  pPage->isInit = 1;
  if( pBt->db->flags & SQLITE_CellSizeCk ){
    return btreeCellSizeCheck(pPage);
  }
  return SQLITE_OK;
................................................................................
          pCur->ix = (u16)idx;
          rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 0);
          pCur->curFlags &= ~BTCF_ValidOvfl;
          if( rc ){
            sqlite3_free(pCellKey);
            goto moveto_finish;
          }
          c = xRecordCompare(nCell, pCellKey, pIdxKey);
          sqlite3_free(pCellKey);
        }
        assert( 
            (pIdxKey->errCode!=SQLITE_CORRUPT || c==0)
         && (pIdxKey->errCode!=SQLITE_NOMEM || pCur->pBtree->db->mallocFailed)
        );
        if( c<0 ){
................................................................................
  }

  /* Add any overflow cells */
  for(i=0; i<pPg->nOverflow; i++){
    int iCell = (iOld + pPg->aiOvfl[i]) - iNew;
    if( iCell>=0 && iCell<nNew ){
      pCellptr = &pPg->aCellIdx[iCell * 2];
      assert( nCell>=iCell );
      memmove(&pCellptr[2], pCellptr, (nCell - iCell) * 2);

      nCell++;
      if( pageInsertArray(
            pPg, pBegin, &pData, pCellptr,
            iCell+iNew, 1, pCArray
      ) ) goto editpage_fail;
    }
  }
................................................................................
    if( apOld[i]->nFree<0 ){
      rc = btreeComputeFreeSpace(apOld[i]);
      if( rc ){
        memset(apOld, 0, (i)*sizeof(MemPage*));
        goto balance_cleanup;
      }
    }
    nMaxCells += 1+apOld[i]->nCell+apOld[i]->nOverflow;
    if( (i--)==0 ) break;

    if( pParent->nOverflow && i+nxDiv==pParent->aiOvfl[0] ){
      apDiv[i] = pParent->apOvfl[0];
      pgno = get4byte(apDiv[i]);
      szNew[i] = pParent->xCellSize(pParent, apDiv[i]);
      pParent->nOverflow = 0;
................................................................................
      }
      dropCell(pParent, i+nxDiv-pParent->nOverflow, szNew[i], &rc);
    }
  }

  /* Make nMaxCells a multiple of 4 in order to preserve 8-byte
  ** alignment */

  nMaxCells = (nMaxCells + 3)&~3;

  /*
  ** Allocate space for memory structures
  */
  szScratch =
       nMaxCells*sizeof(u8*)                       /* b.apCell */
     + nMaxCells*sizeof(u16)                       /* b.szCell */
     + pBt->pageSize;                              /* aSpace1 */

  assert( szScratch<=6*(int)pBt->pageSize );
  b.apCell = sqlite3StackAllocRaw(0, szScratch );
  if( b.apCell==0 ){
    rc = SQLITE_NOMEM_BKPT;
    goto balance_cleanup;
  }
  b.szCell = (u16*)&b.apCell[nMaxCells];
  aSpace1 = (u8*)&b.szCell[nMaxCells];
................................................................................
  int rc;
  MemPage *pPage = 0;
  BtShared *pBt = p->pBt;

  assert( sqlite3BtreeHoldsMutex(p) );
  assert( p->inTrans==TRANS_WRITE );
  assert( iTable>=2 );




  rc = btreeGetPage(pBt, (Pgno)iTable, &pPage, 0);
  if( rc ) return rc;
  rc = sqlite3BtreeClearTable(p, iTable, 0);
  if( rc ){
    releasePage(pPage);
    return rc;

        ** for the portion used by the new allocation. */
        put2byte(&aData[pc+2], x);
      }
      return &aData[pc + x];
    }
    iAddr = pc;
    pc = get2byte(&aData[pc]);
    if( pc<=iAddr+size ){
      if( pc ){
        /* The next slot in the chain is not past the end of the current slot */
        *pRc = SQLITE_CORRUPT_PAGE(pPg);
      }
      return 0;
    }
  }
................................................................................
  }
  testcase( pPage->nCell==MX_CELL(pBt) );
  /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only
  ** possible for a root page of a table that contains no rows) then the
  ** offset to the cell content area will equal the page size minus the
  ** bytes of reserved space. */
  assert( pPage->nCell>0
       || get2byteNotZero(&data[5])==(int)pBt->usableSize
       || CORRUPT_DB );
  pPage->nFree = -1;  /* Indicate that this value is yet uncomputed */
  pPage->isInit = 1;
  if( pBt->db->flags & SQLITE_CellSizeCk ){
    return btreeCellSizeCheck(pPage);
  }
  return SQLITE_OK;
................................................................................
          pCur->ix = (u16)idx;
          rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 0);
          pCur->curFlags &= ~BTCF_ValidOvfl;
          if( rc ){
            sqlite3_free(pCellKey);
            goto moveto_finish;
          }
          c = sqlite3VdbeRecordCompare(nCell, pCellKey, pIdxKey);
          sqlite3_free(pCellKey);
        }
        assert( 
            (pIdxKey->errCode!=SQLITE_CORRUPT || c==0)
         && (pIdxKey->errCode!=SQLITE_NOMEM || pCur->pBtree->db->mallocFailed)
        );
        if( c<0 ){
................................................................................
  }

  /* Add any overflow cells */
  for(i=0; i<pPg->nOverflow; i++){
    int iCell = (iOld + pPg->aiOvfl[i]) - iNew;
    if( iCell>=0 && iCell<nNew ){
      pCellptr = &pPg->aCellIdx[iCell * 2];
      if( nCell>iCell ){
        memmove(&pCellptr[2], pCellptr, (nCell - iCell) * 2);
      }
      nCell++;
      if( pageInsertArray(
            pPg, pBegin, &pData, pCellptr,
            iCell+iNew, 1, pCArray
      ) ) goto editpage_fail;
    }
  }
................................................................................
    if( apOld[i]->nFree<0 ){
      rc = btreeComputeFreeSpace(apOld[i]);
      if( rc ){
        memset(apOld, 0, (i)*sizeof(MemPage*));
        goto balance_cleanup;
      }
    }

    if( (i--)==0 ) break;

    if( pParent->nOverflow && i+nxDiv==pParent->aiOvfl[0] ){
      apDiv[i] = pParent->apOvfl[0];
      pgno = get4byte(apDiv[i]);
      szNew[i] = pParent->xCellSize(pParent, apDiv[i]);
      pParent->nOverflow = 0;
................................................................................
      }
      dropCell(pParent, i+nxDiv-pParent->nOverflow, szNew[i], &rc);
    }
  }

  /* Make nMaxCells a multiple of 4 in order to preserve 8-byte
  ** alignment */
  nMaxCells = nOld*(MX_CELL(pBt) + ArraySize(pParent->apOvfl));
  nMaxCells = (nMaxCells + 3)&~3;

  /*
  ** Allocate space for memory structures
  */
  szScratch =
       nMaxCells*sizeof(u8*)                       /* b.apCell */
     + nMaxCells*sizeof(u16)                       /* b.szCell */
     + pBt->pageSize;                              /* aSpace1 */

  assert( szScratch<=7*(int)pBt->pageSize );
  b.apCell = sqlite3StackAllocRaw(0, szScratch );
  if( b.apCell==0 ){
    rc = SQLITE_NOMEM_BKPT;
    goto balance_cleanup;
  }
  b.szCell = (u16*)&b.apCell[nMaxCells];
  aSpace1 = (u8*)&b.szCell[nMaxCells];
................................................................................
  int rc;
  MemPage *pPage = 0;
  BtShared *pBt = p->pBt;

  assert( sqlite3BtreeHoldsMutex(p) );
  assert( p->inTrans==TRANS_WRITE );
  assert( iTable>=2 );
  if( iTable>btreePagecount(pBt) ){
    return SQLITE_CORRUPT_BKPT;
  }

  rc = btreeGetPage(pBt, (Pgno)iTable, &pPage, 0);
  if( rc ) return rc;
  rc = sqlite3BtreeClearTable(p, iTable, 0);
  if( rc ){
    releasePage(pPage);
    return rc;

  ** array cannot be const.
  */
  static sqlite3_vfs aVfs[] = {
#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
    UNIXVFS("unix",          autolockIoFinder ),
#elif OS_VXWORKS
    UNIXVFS("unix",          vxworksIoFinder ),
#elif __Fuchsia__
    /* We are told that Fuchsia only supports dot-file locking */
    UNIXVFS("unix",          dotlockIoFinder ),
#else
    UNIXVFS("unix",          posixIoFinder ),
#endif
    UNIXVFS("unix-none",     nolockIoFinder ),
    UNIXVFS("unix-dotfile",  dotlockIoFinder ),
    UNIXVFS("unix-excl",     posixIoFinder ),
#if OS_VXWORKS

  ** array cannot be const.
  */
  static sqlite3_vfs aVfs[] = {
#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
    UNIXVFS("unix",          autolockIoFinder ),
#elif OS_VXWORKS
    UNIXVFS("unix",          vxworksIoFinder ),



#else
    UNIXVFS("unix",          posixIoFinder ),
#endif
    UNIXVFS("unix-none",     nolockIoFinder ),
    UNIXVFS("unix-dotfile",  dotlockIoFinder ),
    UNIXVFS("unix-excl",     posixIoFinder ),
#if OS_VXWORKS

  /* If the cache contains a page with page-number pgno, remove it
  ** from its hash chain. Also, if the PGHDR_NEED_SYNC flag was set for 
  ** page pgno before the 'move' operation, it needs to be retained 
  ** for the page moved there.
  */
  pPg->flags &= ~PGHDR_NEED_SYNC;
  pPgOld = sqlite3PagerLookup(pPager, pgno);
  assert( !pPgOld || pPgOld->nRef==1 );
  if( pPgOld ){




    pPg->flags |= (pPgOld->flags&PGHDR_NEED_SYNC);
    if( pPager->tempFile ){
      /* Do not discard pages from an in-memory database since we might
      ** need to rollback later.  Just move the page out of the way. */
      sqlite3PcacheMove(pPgOld, pPager->dbSize+1);
    }else{
      sqlite3PcacheDrop(pPgOld);

  /* If the cache contains a page with page-number pgno, remove it
  ** from its hash chain. Also, if the PGHDR_NEED_SYNC flag was set for 
  ** page pgno before the 'move' operation, it needs to be retained 
  ** for the page moved there.
  */
  pPg->flags &= ~PGHDR_NEED_SYNC;
  pPgOld = sqlite3PagerLookup(pPager, pgno);
  assert( !pPgOld || pPgOld->nRef==1 || CORRUPT_DB );
  if( pPgOld ){
    if( pPgOld->nRef>1 ){
      sqlite3PagerUnrefNotNull(pPgOld);
      return SQLITE_CORRUPT_BKPT;
    }
    pPg->flags |= (pPgOld->flags&PGHDR_NEED_SYNC);
    if( pPager->tempFile ){
      /* Do not discard pages from an in-memory database since we might
      ** need to rollback later.  Just move the page out of the way. */
      sqlite3PcacheMove(pPgOld, pPager->dbSize+1);
    }else{
      sqlite3PcacheDrop(pPgOld);

      /* echo the sql statement if echo on */
      if( pArg && ShellHasFlag(pArg, SHFLG_Echo) ){
        utf8_printf(pArg->out, "%s\n", zStmtSql ? zStmtSql : zSql);
      }

      /* Show the EXPLAIN QUERY PLAN if .eqp is on */
      if( pArg && pArg->autoEQP && sqlite3_strlike("EXPLAIN%",zStmtSql,0)!=0 ){
        sqlite3_stmt *pExplain;
        char *zEQP;
        int triggerEQP = 0;
        disable_debug_trace_modes();
        sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, -1, &triggerEQP);
        if( pArg->autoEQP>=AUTOEQP_trigger ){
          sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, 1, 0);
................................................................................
        }
        restore_debug_trace_modes();
      }

      if( pArg ){
        pArg->cMode = pArg->mode;
        if( pArg->autoExplain ){
          if( sqlite3_column_count(pStmt)==8
           && sqlite3_strlike("EXPLAIN%", zStmtSql,0)==0
          ){
            pArg->cMode = MODE_Explain;
          }
          if( sqlite3_column_count(pStmt)==4
           && sqlite3_strlike("EXPLAIN QUERY PLAN%", zStmtSql,0)==0 ){

            pArg->cMode = MODE_EQP;
          }
        }

        /* If the shell is currently in ".explain" mode, gather the extra
        ** data required to add indents to the output.*/
        if( pArg->cMode==MODE_Explain ){

      /* echo the sql statement if echo on */
      if( pArg && ShellHasFlag(pArg, SHFLG_Echo) ){
        utf8_printf(pArg->out, "%s\n", zStmtSql ? zStmtSql : zSql);
      }

      /* Show the EXPLAIN QUERY PLAN if .eqp is on */
      if( pArg && pArg->autoEQP && sqlite3_stmt_isexplain(pStmt)==0 ){
        sqlite3_stmt *pExplain;
        char *zEQP;
        int triggerEQP = 0;
        disable_debug_trace_modes();
        sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, -1, &triggerEQP);
        if( pArg->autoEQP>=AUTOEQP_trigger ){
          sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, 1, 0);
................................................................................
        }
        restore_debug_trace_modes();
      }

      if( pArg ){
        pArg->cMode = pArg->mode;
        if( pArg->autoExplain ){
          if( sqlite3_stmt_isexplain(pStmt)==1 ){


            pArg->cMode = MODE_Explain;
          }


          if( sqlite3_stmt_isexplain(pStmt)==2 ){
            pArg->cMode = MODE_EQP;
          }
        }

        /* If the shell is currently in ".explain" mode, gather the extra
        ** data required to add indents to the output.*/
        if( pArg->cMode==MODE_Explain ){

** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so
** sqlite3_stmt_readonly() returns false for those commands.
*/
int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);













/*
** CAPI3REF: Determine If A Prepared Statement Has Been Reset
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
** [prepared statement] S has been stepped at least once using 
** [sqlite3_step(S)] but has neither run to completion (returned
................................................................................
** the value of the fourth parameter then the resulting string value will
** contain embedded NULs.  The result of expressions involving strings
** with embedded NULs is undefined.
**
** ^The fifth argument to the BLOB and string binding interfaces
** is a destructor used to dispose of the BLOB or
** string after SQLite has finished with it.  ^The destructor is called
** to dispose of the BLOB or string even if the call to bind API fails.


** ^If the fifth argument is
** the special value [SQLITE_STATIC], then SQLite assumes that the
** information is in static, unmanaged space and does not need to be freed.
** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
** SQLite makes its own private copy of the data immediately, before
** the sqlite3_bind_*() routine returns.
**
................................................................................
** CAPI3REF: Return The Filename For A Database Connection
** METHOD: sqlite3
**
** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
** associated with database N of connection D.  ^The main database file
** has the name "main".  If there is no attached database N on the database
** connection D, or if database N is a temporary or in-memory database, then
** a NULL pointer is returned.
**
** ^The filename returned by this function is the output of the
** xFullPathname method of the [VFS].  ^In other words, the filename
** will be an absolute pathname, even if the filename used
** to open the database originally was a URI or relative pathname.
*/
const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);

** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so
** sqlite3_stmt_readonly() returns false for those commands.
*/
int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Query The EXPLAIN Setting For A Prepared Statement
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_isexplain(S) interface returns 1 if the
** prepared statement S is an EXPLAIN statement, or 2 if the
** statement S is an EXPLAIN QUERY PLAN.
** ^The sqlite3_stmt_isexplain(S) interface returns 0 if S is
** an ordinary statement or a NULL pointer.
*/
int sqlite3_stmt_isexplain(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Determine If A Prepared Statement Has Been Reset
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
** [prepared statement] S has been stepped at least once using 
** [sqlite3_step(S)] but has neither run to completion (returned
................................................................................
** the value of the fourth parameter then the resulting string value will
** contain embedded NULs.  The result of expressions involving strings
** with embedded NULs is undefined.
**
** ^The fifth argument to the BLOB and string binding interfaces
** is a destructor used to dispose of the BLOB or
** string after SQLite has finished with it.  ^The destructor is called
** to dispose of the BLOB or string even if the call to the bind API fails,
** except the destructor is not called if the third parameter is a NULL
** pointer or the fourth parameter is negative.
** ^If the fifth argument is
** the special value [SQLITE_STATIC], then SQLite assumes that the
** information is in static, unmanaged space and does not need to be freed.
** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
** SQLite makes its own private copy of the data immediately, before
** the sqlite3_bind_*() routine returns.
**
................................................................................
** CAPI3REF: Return The Filename For A Database Connection
** METHOD: sqlite3
**
** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
** associated with database N of connection D.  ^The main database file
** has the name "main".  If there is no attached database N on the database
** connection D, or if database N is a temporary or in-memory database, then
** this function will return either a NULL pointer or an empty string.
**
** ^The filename returned by this function is the output of the
** xFullPathname method of the [VFS].  ^In other words, the filename
** will be an absolute pathname, even if the filename used
** to open the database originally was a URI or relative pathname.
*/
const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);

  }

  if( getStmtPointer(interp, Tcl_GetString(objv[1]), &pStmt) ) return TCL_ERROR;
  rc = sqlite3_stmt_readonly(pStmt);
  Tcl_SetObjResult(interp, Tcl_NewBooleanObj(rc));
  return TCL_OK;
}




























/*
** Usage:  sqlite3_stmt_busy  STMT
**
** Return true if STMT is a non-NULL pointer to a statement
** that has been stepped but not to completion.
*/
................................................................................
     { "sqlite3_sql",                   test_sql           ,0 },
     { "sqlite3_expanded_sql",          test_ex_sql        ,0 },
#ifdef SQLITE_ENABLE_NORMALIZE
     { "sqlite3_normalized_sql",        test_norm_sql      ,0 },
#endif
     { "sqlite3_next_stmt",             test_next_stmt     ,0 },
     { "sqlite3_stmt_readonly",         test_stmt_readonly ,0 },

     { "sqlite3_stmt_busy",             test_stmt_busy     ,0 },
     { "uses_stmt_journal",             uses_stmt_journal ,0 },

     { "sqlite3_release_memory",        test_release_memory,     0},
     { "sqlite3_db_release_memory",     test_db_release_memory,  0},
     { "sqlite3_db_cacheflush",         test_db_cacheflush,      0},
     { "sqlite3_system_errno",          test_system_errno,       0},

  }

  if( getStmtPointer(interp, Tcl_GetString(objv[1]), &pStmt) ) return TCL_ERROR;
  rc = sqlite3_stmt_readonly(pStmt);
  Tcl_SetObjResult(interp, Tcl_NewBooleanObj(rc));
  return TCL_OK;
}

/*
** Usage:  sqlite3_stmt_isexplain  STMT
**
** Return 1, 2, or 0 respectively if STMT is an EXPLAIN statement, an
** EXPLAIN QUERY PLAN statement or an ordinary statement or NULL pointer.
*/
static int SQLITE_TCLAPI test_stmt_isexplain(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  sqlite3_stmt *pStmt;
  int rc;

  if( objc!=2 ){
    Tcl_AppendResult(interp, "wrong # args: should be \"",
        Tcl_GetStringFromObj(objv[0], 0), " STMT", 0);
    return TCL_ERROR;
  }

  if( getStmtPointer(interp, Tcl_GetString(objv[1]), &pStmt) ) return TCL_ERROR;
  rc = sqlite3_stmt_isexplain(pStmt);
  Tcl_SetObjResult(interp, Tcl_NewIntObj(rc));
  return TCL_OK;
}

/*
** Usage:  sqlite3_stmt_busy  STMT
**
** Return true if STMT is a non-NULL pointer to a statement
** that has been stepped but not to completion.
*/
................................................................................
     { "sqlite3_sql",                   test_sql           ,0 },
     { "sqlite3_expanded_sql",          test_ex_sql        ,0 },
#ifdef SQLITE_ENABLE_NORMALIZE
     { "sqlite3_normalized_sql",        test_norm_sql      ,0 },
#endif
     { "sqlite3_next_stmt",             test_next_stmt     ,0 },
     { "sqlite3_stmt_readonly",         test_stmt_readonly ,0 },
     { "sqlite3_stmt_isexplain",        test_stmt_isexplain,0 },
     { "sqlite3_stmt_busy",             test_stmt_busy     ,0 },
     { "uses_stmt_journal",             uses_stmt_journal ,0 },

     { "sqlite3_release_memory",        test_release_memory,     0},
     { "sqlite3_db_release_memory",     test_db_release_memory,  0},
     { "sqlite3_db_cacheflush",         test_db_cacheflush,      0},
     { "sqlite3_system_errno",          test_system_errno,       0},

/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/
int sqlite3RunVacuum(
  char **pzErrMsg,        /* Write error message here */
  sqlite3 *db,            /* Database connection */
  int iDb,                /* Which attached DB to vacuum */
  sqlite3_value *pOut     /* Write results here, if not NULL */
){
  int rc = SQLITE_OK;     /* Return code from service routines */
  Btree *pMain;           /* The database being vacuumed */
  Btree *pTemp;           /* The temporary database we vacuum into */
  u32 saved_mDbFlags;     /* Saved value of db->mDbFlags */
  u64 saved_flags;        /* Saved value of db->flags */
  int saved_nChange;      /* Saved value of db->nChange */
  int saved_nTotalChange; /* Saved value of db->nTotalChange */

  u8 saved_mTrace;        /* Saved trace settings */
  Db *pDb = 0;            /* Database to detach at end of vacuum */
  int isMemDb;            /* True if vacuuming a :memory: database */
  int nRes;               /* Bytes of reserved space at the end of each page */
  int nDb;                /* Number of attached databases */
  const char *zDbMain;    /* Schema name of database to vacuum */
  const char *zOut;       /* Name of output file */
................................................................................
    sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction");
    return SQLITE_ERROR;
  }
  if( db->nVdbeActive>1 ){
    sqlite3SetString(pzErrMsg, db,"cannot VACUUM - SQL statements in progress");
    return SQLITE_ERROR;
  }

  if( pOut ){
    if( sqlite3_value_type(pOut)!=SQLITE_TEXT ){
      sqlite3SetString(pzErrMsg, db, "non-text filename");
      return SQLITE_ERROR;
    }
    zOut = (const char*)sqlite3_value_text(pOut);


  }else{
    zOut = "";
  }

  /* Save the current value of the database flags so that it can be 
  ** restored before returning. Then set the writable-schema flag, and
  ** disable CHECK and foreign key constraints.  */
................................................................................
  ** actually occurs when doing a vacuum since the vacuum_db is initially
  ** empty.  Only the journal header is written.  Apparently it takes more
  ** time to parse and run the PRAGMA to turn journalling off than it does
  ** to write the journal header file.
  */
  nDb = db->nDb;
  rc = execSqlF(db, pzErrMsg, "ATTACH %Q AS vacuum_db", zOut);

  if( rc!=SQLITE_OK ) goto end_of_vacuum;
  assert( (db->nDb-1)==nDb );
  pDb = &db->aDb[nDb];
  assert( strcmp(pDb->zDbSName,"vacuum_db")==0 );
  pTemp = pDb->pBt;
  if( pOut ){
    sqlite3_file *id = sqlite3PagerFile(sqlite3BtreePager(pTemp));

/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/
int sqlite3RunVacuum(
  char **pzErrMsg,        /* Write error message here */
  sqlite3 *db,            /* Database connection */
  int iDb,                /* Which attached DB to vacuum */
  sqlite3_value *pOut     /* Write results here, if not NULL. VACUUM INTO */
){
  int rc = SQLITE_OK;     /* Return code from service routines */
  Btree *pMain;           /* The database being vacuumed */
  Btree *pTemp;           /* The temporary database we vacuum into */
  u32 saved_mDbFlags;     /* Saved value of db->mDbFlags */
  u64 saved_flags;        /* Saved value of db->flags */
  int saved_nChange;      /* Saved value of db->nChange */
  int saved_nTotalChange; /* Saved value of db->nTotalChange */
  u32 saved_openFlags;    /* Saved value of db->openFlags */
  u8 saved_mTrace;        /* Saved trace settings */
  Db *pDb = 0;            /* Database to detach at end of vacuum */
  int isMemDb;            /* True if vacuuming a :memory: database */
  int nRes;               /* Bytes of reserved space at the end of each page */
  int nDb;                /* Number of attached databases */
  const char *zDbMain;    /* Schema name of database to vacuum */
  const char *zOut;       /* Name of output file */
................................................................................
    sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction");
    return SQLITE_ERROR;
  }
  if( db->nVdbeActive>1 ){
    sqlite3SetString(pzErrMsg, db,"cannot VACUUM - SQL statements in progress");
    return SQLITE_ERROR;
  }
  saved_openFlags = db->openFlags;
  if( pOut ){
    if( sqlite3_value_type(pOut)!=SQLITE_TEXT ){
      sqlite3SetString(pzErrMsg, db, "non-text filename");
      return SQLITE_ERROR;
    }
    zOut = (const char*)sqlite3_value_text(pOut);
    db->openFlags &= ~SQLITE_OPEN_READONLY;
    db->openFlags |= SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE;
  }else{
    zOut = "";
  }

  /* Save the current value of the database flags so that it can be 
  ** restored before returning. Then set the writable-schema flag, and
  ** disable CHECK and foreign key constraints.  */
................................................................................
  ** actually occurs when doing a vacuum since the vacuum_db is initially
  ** empty.  Only the journal header is written.  Apparently it takes more
  ** time to parse and run the PRAGMA to turn journalling off than it does
  ** to write the journal header file.
  */
  nDb = db->nDb;
  rc = execSqlF(db, pzErrMsg, "ATTACH %Q AS vacuum_db", zOut);
  db->openFlags = saved_openFlags;
  if( rc!=SQLITE_OK ) goto end_of_vacuum;
  assert( (db->nDb-1)==nDb );
  pDb = &db->aDb[nDb];
  assert( strcmp(pDb->zDbSName,"vacuum_db")==0 );
  pTemp = pDb->pBt;
  if( pOut ){
    sqlite3_file *id = sqlite3PagerFile(sqlite3BtreePager(pTemp));

/*
** Return true if the prepared statement is guaranteed to not modify the
** database.
*/
int sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
  return pStmt ? ((Vdbe*)pStmt)->readOnly : 1;
}









/*
** Return true if the prepared statement is in need of being reset.
*/
int sqlite3_stmt_busy(sqlite3_stmt *pStmt){
  Vdbe *v = (Vdbe*)pStmt;
  return v!=0 && v->magic==VDBE_MAGIC_RUN && v->pc>=0;

/*
** Return true if the prepared statement is guaranteed to not modify the
** database.
*/
int sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
  return pStmt ? ((Vdbe*)pStmt)->readOnly : 1;
}

/*
** Return 1 if the statement is an EXPLAIN and return 2 if the
** statement is an EXPLAIN QUERY PLAN
*/
int sqlite3_stmt_isexplain(sqlite3_stmt *pStmt){
  return pStmt ? ((Vdbe*)pStmt)->explain : 0;
}

/*
** Return true if the prepared statement is in need of being reset.
*/
int sqlite3_stmt_busy(sqlite3_stmt *pStmt){
  Vdbe *v = (Vdbe*)pStmt;
  return v!=0 && v->magic==VDBE_MAGIC_RUN && v->pc>=0;

  memset(&sIter, 0, sizeof(sIter));
  sIter.v = v;

  while( (pOp = opIterNext(&sIter))!=0 ){
    int opcode = pOp->opcode;
    if( opcode==OP_Destroy || opcode==OP_VUpdate || opcode==OP_VRename 
     || opcode==OP_VDestroy

     || ((opcode==OP_Halt || opcode==OP_HaltIfNull) 
      && ((pOp->p1)!=SQLITE_OK && pOp->p2==OE_Abort))
    ){
      hasAbort = 1;
      break;
    }
    if( opcode==OP_CreateBtree && pOp->p3==BTREE_INTKEY ) hasCreateTable = 1;

  memset(&sIter, 0, sizeof(sIter));
  sIter.v = v;

  while( (pOp = opIterNext(&sIter))!=0 ){
    int opcode = pOp->opcode;
    if( opcode==OP_Destroy || opcode==OP_VUpdate || opcode==OP_VRename 
     || opcode==OP_VDestroy
     || (opcode==OP_Function0 && pOp->p4.pFunc->funcFlags&SQLITE_FUNC_INTERNAL)
     || ((opcode==OP_Halt || opcode==OP_HaltIfNull) 
      && ((pOp->p1)!=SQLITE_OK && pOp->p2==OE_Abort))
    ){
      hasAbort = 1;
      break;
    }
    if( opcode==OP_CreateBtree && pOp->p3==BTREE_INTKEY ) hasCreateTable = 1;

    sqlite3WalkExpr(&w, pWInfo->pWhere);
    sqlite3WalkExprList(&w, pWInfo->pOrderBy);
    sqlite3WalkExprList(&w, pWInfo->pResultSet);
  }
}

/*
** The pTruth expression is always tree because it is the WHERE clause
** a partial index that is driving a query loop.  Look through all of the
** WHERE clause terms on the query, and if any of those terms must be
** true because pTruth is true, then mark those WHERE clause terms as
** coded.
*/
static void whereApplyPartialIndexConstraints(
  Expr *pTruth,

    sqlite3WalkExpr(&w, pWInfo->pWhere);
    sqlite3WalkExprList(&w, pWInfo->pOrderBy);
    sqlite3WalkExprList(&w, pWInfo->pResultSet);
  }
}

/*
** The pTruth expression is always true because it is the WHERE clause
** a partial index that is driving a query loop.  Look through all of the
** WHERE clause terms on the query, and if any of those terms must be
** true because pTruth is true, then mark those WHERE clause terms as
** coded.
*/
static void whereApplyPartialIndexConstraints(
  Expr *pTruth,

    assert( p->x.pList==0 );
  }else if( ExprHasProperty(p, EP_xIsSelect) ){
    if( ExprHasProperty(p, EP_VarSelect) ) pMaskSet->bVarSelect = 1;
    mask |= exprSelectUsage(pMaskSet, p->x.pSelect);
  }else if( p->x.pList ){
    mask |= sqlite3WhereExprListUsage(pMaskSet, p->x.pList);
  }






  return mask;
}
Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){
  return p ? sqlite3WhereExprUsageNN(pMaskSet,p) : 0;
}
Bitmask sqlite3WhereExprListUsage(WhereMaskSet *pMaskSet, ExprList *pList){
  int i;

    assert( p->x.pList==0 );
  }else if( ExprHasProperty(p, EP_xIsSelect) ){
    if( ExprHasProperty(p, EP_VarSelect) ) pMaskSet->bVarSelect = 1;
    mask |= exprSelectUsage(pMaskSet, p->x.pSelect);
  }else if( p->x.pList ){
    mask |= sqlite3WhereExprListUsage(pMaskSet, p->x.pList);
  }
#ifndef SQLITE_OMIT_WINDOWFUNC
  if( p->op==TK_FUNCTION && p->y.pWin ){
    mask |= sqlite3WhereExprListUsage(pMaskSet, p->y.pWin->pPartition);
    mask |= sqlite3WhereExprListUsage(pMaskSet, p->y.pWin->pOrderBy);
  }
#endif
  return mask;
}
Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){
  return p ? sqlite3WhereExprUsageNN(pMaskSet,p) : 0;
}
Bitmask sqlite3WhereExprListUsage(WhereMaskSet *pMaskSet, ExprList *pList){
  int i;

  ALTER TABLE t1 RENAME b TO bbb;
}

do_execsql_test 3.2 {
  SELECT sql FROM sqlite_master WHERE name = 'v1'
} {{CREATE VIEW v1 AS SELECT * FROM t1 WHERE a=1 OR (bbb IN ())}}


































finish_test

  ALTER TABLE t1 RENAME b TO bbb;
}

do_execsql_test 3.2 {
  SELECT sql FROM sqlite_master WHERE name = 'v1'
} {{CREATE VIEW v1 AS SELECT * FROM t1 WHERE a=1 OR (bbb IN ())}}

#-------------------------------------------------------------------------
reset_db
do_execsql_test 4.0 {
  CREATE TABLE t1(a, b);
  CREATE TABLE t3(e, f);
  CREATE TRIGGER tr1 AFTER INSERT ON t1 BEGIN
    INSERT INTO t2 VALUES(new.a, new.b);
  END;
}

do_catchsql_test 4.1.2 {
  BEGIN;
    ALTER TABLE t3 RENAME TO t4;
} {1 {error in trigger tr1: no such table: main.t2}}
do_execsql_test 4.1.2 {
  COMMIT;
}
do_execsql_test 4.1.3 {
  SELECT * FROM sqlite_master WHERE type='table' AND name!='t1';
} {table t3 t3 3 {CREATE TABLE t3(e, f)}}


do_catchsql_test 4.2.1 {
  BEGIN;
    ALTER TABLE t3 RENAME e TO eee;
} {1 {error in trigger tr1: no such table: main.t2}}
do_execsql_test 4.2.2 {
  COMMIT;
}
do_execsql_test 4.2.3 {
  SELECT * FROM sqlite_master WHERE type='table' AND name!='t1';
} {table t3 t3 3 {CREATE TABLE t3(e, f)}}

finish_test

ifcapable wal {
  test_is_readonly capi3d-2.6 {PRAGMA journal_mode=WAL} 0
  test_is_readonly capi3d-2.7 {PRAGMA wal_checkpoint} 0
}
test_is_readonly capi3d-2.8 {PRAGMA application_id=1234} 0
test_is_readonly capi3d-2.9 {VACUUM} 0
test_is_readonly capi3d-2.10 {PRAGMA integrity_check} 1
do_test capi3-2.99 {
  sqlite3_stmt_readonly 0
} 1





















# Tests for sqlite3_stmt_busy
#
do_test capi3d-3.1 {
  db eval {INSERT INTO t1 VALUES(6); INSERT INTO t1 VALUES(7);}
  set STMT [sqlite3_prepare db {SELECT * FROM t1} -1 TAIL]
  sqlite3_stmt_busy $STMT
} {0}

ifcapable wal {
  test_is_readonly capi3d-2.6 {PRAGMA journal_mode=WAL} 0
  test_is_readonly capi3d-2.7 {PRAGMA wal_checkpoint} 0
}
test_is_readonly capi3d-2.8 {PRAGMA application_id=1234} 0
test_is_readonly capi3d-2.9 {VACUUM} 0
test_is_readonly capi3d-2.10 {PRAGMA integrity_check} 1
do_test capi3-2.49 {
  sqlite3_stmt_readonly 0
} 1


# Tests for the is-explain interface.
#
proc test_is_explain {testname sql truth} {
  do_test $testname [format {
    set DB [sqlite3_connection_pointer db]
    set STMT [sqlite3_prepare $DB {%s} -1 TAIL]
    set rc [sqlite3_stmt_isexplain $STMT]
    sqlite3_finalize $STMT
    set rc
  } $sql] $truth
}

test_is_explain capi3d-2.51 {SELECT * FROM sqlite_master} 0
test_is_explain capi3d-2.52 { explain SELECT * FROM sqlite_master} 1
test_is_explain capi3d-2.53 {  Explain Query Plan select * FROM sqlite_master} 2
do_test capi3-2.99 {
  sqlite3_stmt_isexplain 0
} 0

# Tests for sqlite3_stmt_busy
#
do_test capi3d-3.1 {
  db eval {INSERT INTO t1 VALUES(6); INSERT INTO t1 VALUES(7);}
  set STMT [sqlite3_prepare db {SELECT * FROM t1} -1 TAIL]
  sqlite3_stmt_busy $STMT
} {0}

|   2512: 00 00 00 00 00 00 00 00 aa 00 00 00 00 00 00 00   ................
| end crash-acaae0347204ae.db
}]} {}

do_catchsql_test 1.1 {
  PRAGMA cell_size_check = off;
  DROP INDEX t1x1;
} {1 {no such index: t1x1}}

do_catchsql_test 1.2 {
  SELECT sum(s+length(b)) FROM t1 WHERE a IN (110,10,150) AND q IS NULL;
} {1 {no such table: t1}}

do_catchsql_test 1.3 {
  REINDEX t1;
} {1 {unable to identify the object to be reindexed}}






#-------------------------------------------------------------------------
reset_db
do_test 2.0 {
  sqlite3 db {}
  db deserialize [decode_hexdb {
| size 20480 pagesize 4096 filename crash.txt.db

|   2512: 00 00 00 00 00 00 00 00 aa 00 00 00 00 00 00 00   ................
| end crash-acaae0347204ae.db
}]} {}

do_catchsql_test 1.1 {
  PRAGMA cell_size_check = off;
  DROP INDEX t1x1;
} {1 {database disk image is malformed}}

do_catchsql_test 1.2 {
  SELECT sum(s+length(b)) FROM t1 WHERE a IN (110,10,150) AND q IS NULL;
} {1 {database disk image is malformed}}

do_catchsql_test 1.3 {
  REINDEX t1;
} {1 {database disk image is malformed}}

do_catchsql_test 1.4 {
  PRAGMA integrity_check
} {1 {database disk image is malformed}}


#-------------------------------------------------------------------------
reset_db
do_test 2.0 {
  sqlite3 db {}
  db deserialize [decode_hexdb {
| size 20480 pagesize 4096 filename crash.txt.db

| end crash-b794c89d922ac9.db
}]} {}

do_catchsql_test 22.1 {
  SELECT snippet(t1,'', '', '--',-1,01)==0
    FROM t1 WHERE a MATCH 'rtree OR json1rtree OR json1';
} {0 {0 0 0 0 0 0 0}}



























































































































































































































finish_test

| end crash-b794c89d922ac9.db
}]} {}

do_catchsql_test 22.1 {
  SELECT snippet(t1,'', '', '--',-1,01)==0
    FROM t1 WHERE a MATCH 'rtree OR json1rtree OR json1';
} {0 {0 0 0 0 0 0 0}}

#-------------------------------------------------------------------------
reset_db
do_test 23.0 {
  sqlite3 db {}
  db deserialize [decode_hexdb {
.open --hexdb
| size 28672 pagesize 4096 filename crash-670b15f2955a36.db
| page 1 offset 0
|      0: 53 51 4c 69 74 65 20 66 6f 72 6d 61 74 20 33 00   SQLite format 3.
|     16: 10 00 01 01 00 40 20 20 00 00 00 00 00 00 00 07   .....@  ........
|     32: 00 00 00 02 10 00 00 01 00 00 00 07 00 00 00 00   ................
|     96: 00 00 00 00 0d 0e b1 00 06 0d a4 00 0f 8d 0f 21   ...............!
|    112: 0e b9 0d c8 0e 7e 0d a4 00 00 00 00 00 00 00 00   .....~..........
|   3488: 00 00 00 00 22 07 06 17 11 11 01 31 74 61 62 6c   ...........1tabl
|   3504: 65 74 32 74 32 07 43 52 45 41 54 45 20 54 41 42   et2t2.CREATE TAB
|   3520: 4c 45 20 74 32 28 78 29 81 33 05 07 17 1f 1f 01   LE t2(x).3......
|   3536: 82 35 74 61 62 6c 65 74 31 5f 73 65 67 64 69 72   .5tablet1_segdir
|   3552: 74 31 5f 73 65 67 64 69 72 05 43 52 45 41 54 45   t1_segdir.CREATE
|   3568: 20 54 41 42 4c 45 20 27 74 31 5f 73 65 67 64 69    TABLE 't1_segdi
|   3584: 72 27 28 6c 65 76 65 6c 20 49 4e 54 45 47 45 52   r'(level INTEGER
|   3600: 2c 69 64 78 20 49 4e 54 45 47 45 52 2c 73 74 61   ,idx INTEGER,sta
|   3616: 72 74 5f 62 6c 6f 63 6b 20 49 4e 54 45 47 45 52   rt_block INTEGER
|   3632: 2c 6c 65 61 76 65 73 5f 65 6e 64 5f 62 6c 6f 63   ,leaves_end_bloc
|   3648: 6b 20 49 4e 54 45 47 45 52 2c 65 6e 64 5f 62 6c   k INTEGER,end_bl
|   3664: 6f 63 6b 20 49 4e 54 45 47 45 52 2c 72 6f 6f 74   ock INTEGER,root
|   3680: 20 42 4c 4f 42 2c 50 52 49 4d 41 52 59 20 4b 45    BLOB,PRIMARY KE
|   3696: 59 28 6c 65 76 65 6c 2c 20 69 64 78 29 29 31 06   Y(level, idx))1.
|   3712: 06 17 45 1f 01 00 69 6e 64 65 78 73 71 6c 69 74   ..E...indexsqlit
|   3728: 65 5f 61 75 74 6f 69 6e 64 65 78 5f 74 31 5f 73   e_autoindex_t1_s
|   3744: 65 67 64 69 72 5f 31 74 31 5f 73 65 67 64 69 72   egdir_1t1_segdir
|   3760: 06 0f c7 00 08 00 00 00 00 66 04 07 17 23 23 01   .........f...##.
|   3776: 81 13 74 61 62 6c 75 74 31 5f 73 65 67 6d 65 6e   ..tablut1_segmen
|   3792: 74 73 74 31 5f 73 65 67 6d 65 6e 74 73 04 43 52   tst1_segments.CR
|   3808: 45 41 54 45 20 54 41 42 4c 45 20 27 74 31 5f 73   EATE TABLE 't1_s
|   3824: 65 67 6d 65 6e 74 73 27 28 62 6c 6f 63 6b 69 64   egments'(blockid
|   3840: 20 49 4e 54 45 47 45 42 20 50 52 49 4d 41 52 59    INTEGEB PRIMARY
|   3856: 20 4b 45 59 2c 20 62 6c 6f 63 6b 20 42 4c 4f 42    KEY, block BLOB
|   3872: 29 6a 03 07 17 21 21 01 81 1f 74 61 62 6c 65 74   )j...!!...tablet
|   3888: 31 5f 63 6f 6e 74 65 6e 74 74 31 5f 63 6f 6e 74   1_contentt1_cont
|   3904: 65 6e 74 03 43 52 45 41 54 45 20 54 41 42 4c 45   ent.CREATE TABLE
|   3920: 20 27 74 31 5f 63 6f 6e 74 65 6e 74 27 28 64 6f    't1_content'(do
|   3936: 63 69 64 20 49 4e 54 45 47 45 52 20 50 52 49 4d   cid INTEGER PRIM
|   3952: 41 52 59 20 4b 45 59 2c 20 27 63 30 61 27 2c 20   ARY KEY, 'c0a', 
|   3968: 27 63 31 62 27 2c 20 27 63 32 63 27 29 38 02 06   'c1b', 'c2c')8..
|   3984: 17 11 11 08 5f 74 61 62 6c 65 74 31 74 31 43 52   ...._tablet1t1CR
|   4000: 45 41 54 45 20 56 49 52 54 55 41 4c 20 54 41 42   EATE VIRTUAL TAB
|   4016: 4c 45 20 74 31 20 55 53 49 4e 47 20 66 74 73 33   LE t1 USING fts3
|   4032: 28 61 2c 62 2c 63 29 00 00 00 00 00 00 00 00 00   (a,b,c).........
| page 3 offset 8192
|      0: 0d 00 00 00 25 0b 48 01 0f d8 00 2f 0f 86 0f 74   ....%.H..../...t
|     16: 0f 61 0f 4e 0f 2f 0f 0f 0e ef 0e d7 0e be 0e a5   .a.N./..........
|     32: 0e 8d 0e 74 0e 5a fe 40 0e 24 0e 08 0d ef 0d d5   ...t.Z.@.$......
|     48: 0d bb 0d a0 0d 84 0d 68 0d 4f 81 35 0d 1b 0c fb   .......h.O.5....
|     64: 0c da 0c b9 0c 99 0c 78 0c 57 0c 3e 00 00 00 00   .......x.W.>....
|   2880: 00 00 00 00 00 00 00 00 81 3f 25 06 00 82 7f 10   .........?%.....
|   2896: 00 43 4f 4d 50 49 4c 45 52 3d 67 63 63 2d 35 2e   .COMPILER=gcc-5.
|   2912: 34 2e 30 20 32 30 31 36 30 36 30 39 20 44 45 42   4.0 20160609 DEB
|   2928: 55 47 20 45 4e 41 42 4c 45 20 44 42 53 54 41 54   UG ENABLE DBSTAT
|   2944: 20 56 54 41 42 20 45 4e 41 42 4c 45 20 46 54 53    VTAB ENABLE FTS
|   2960: 34 20 45 4e 41 42 4c 45 20 46 54 53 35 20 45 4e   4 ENABLE FTS5 EN
|   2976: 41 42 4c 45 20 47 45 4f 50 4f 4c 59 20 45 4e 41   ABLE GEOPOLY ENA
|   2992: 42 4c 45 20 4a 53 4f 4e 31 20 45 4e 41 42 4c 45   BLE JSON1 ENABLE
|   3008: 20 4d 45 4d 53 59 53 35 20 45 4e 41 42 4c 45 20    MEMSYS5 ENABLE 
|   3024: 52 54 52 45 45 20 4d 41 58 20 4d 45 4d 4f 52 59   RTREE MAX MEMORY
|   3040: 3d 35 30 30 30 30 30 30 30 20 4f 4d 49 54 20 4c   =50000000 OMIT L
|   3056: 4f 41 44 20 45 58 54 45 4e 53 49 4f 4e 20 54 48   OAD EXTENSION TH
|   3072: 52 45 41 44 53 41 46 45 3d 30 18 24 05 00 35 0f   READSAFE=0.$..5.
|   3088: 19 54 48 52 45 41 44 53 41 46 45 3d 30 58 42 49   .THREADSAFE=0XBI
|   3104: 4e 41 52 59 18 23 55 00 25 0f 19 54 48 52 45 41   NARY.#U.%..THREA
|   3120: 44 53 41 46 45 3d 30 58 4e 4f 43 41 53 45 17 22   DSAFE=0XNOCASE..
|   3136: 05 00 25 0f 17 54 48 52 45 41 44 53 41 46 45 3d   ..%..THREADSAFE=
|   3152: 30 58 52 54 52 49 4d 1f 21 05 00 33 0f 19 4f 4d   0XRTRIM.!..3..OM
|   3168: 49 54 20 4c 4f 41 44 20 45 58 54 45 4e 53 49 4f   IT LOAD EXTENSIO
|   3184: 4e 58 42 49 4e 41 52 59 1f 20 05 00 33 0f 19 4f   NXBINARY. ..3..O
|   3200: 4d 49 54 20 4c 4f 41 44 20 45 58 54 45 4e 53 49   MIT LOAD EXTENSI
|   3216: 4f 4e 58 4e 4f 43 41 53 45 1e 1f 05 00 33 0f 17   ONXNOCASE....3..
|   3232: 4f 4d 49 54 20 4c 4f 41 44 20 45 58 54 45 4e 53   OMIT LOAD EXTENS
|   3248: 49 4f 4e 58 52 54 52 49 4d 1f 1e 05 00 33 0f 19   IONXRTRIM....3..
|   3264: 4d 41 58 20 4d 45 4d 4f 52 59 3d 35 30 30 30 30   MAX MEMORY=50000
|   3280: 30 30 30 58 42 49 4e 41 52 59 1f 1d 05 00 33 0f   000XBINARY....3.
|   3296: 19 4d 41 58 20 4d 45 4d 4f 52 59 3d 35 30 30 30   .MAX MEMORY=5000
|   3312: 30 30 30 30 58 4e 4f 43 41 53 45 1e 1c 05 00 33   0000XNOCASE....3
|   3328: 0f 17 4d 41 58 20 4d 45 4d 4f 52 59 3d 35 30 30   ..MAX MEMORY=500
|   3344: 30 30 30 30 30 58 52 54 52 49 4d 18 1b 05 00 25   00000XRTRIM....%
|   3360: 0f 19 45 4e 41 42 4c 44 20 52 54 52 45 45 58 42   ..ENABLD RTREEXB
|   3376: 49 4e 41 52 59 18 1a 05 00 25 0f 19 45 4e 41 42   INARY....%..ENAB
|   3392: 4c 45 20 52 54 52 45 45 58 4e 4f 43 41 53 45 17   LE RTREEXNOCASE.
|   3408: 19 05 00 24 0f 17 45 4e 40 42 4c 45 20 52 54 52   ...$..EN@BLE RTR
|   3424: 45 45 58 52 54 52 49 4d 1a 18 05 00 29 0f 19 45   EEXRTRIM....)..E
|   3440: 4e 41 42 4c 45 20 4d 45 4d 53 59 53 35 58 42 49   NABLE MEMSYS5XBI
|   3456: 4e 41 52 59 1a 17 05 00 29 0f 19 45 4d 41 42 4c   NARY....)..EMABL
|   3472: 45 20 4d 45 4d 53 59 53 35 58 4e 4f 43 41 4c 45   E MEMSYS5XNOCALE
|   3488: 19 16 05 00 29 0f 17 45 4e 41 42 4c 45 20 4d 45   ....)..ENABLE ME
|   3504: 4e 53 59 53 35 58 52 54 52 49 4d 18 15 05 00 25   NSYS5XRTRIM....%
|   3520: 0f 19 45 4e 41 42 4c 45 20 4a 53 4f 4e 31 58 42   ..ENABLE JSON1XB
|   3536: 49 4e 41 52 59 18 14 05 00 25 0f 19 45 4e 41 42   INARY....%..ENAB
|   3552: 4c 45 20 4a 53 4f 4e 31 58 4e 4f 43 41 53 45 17   LE JSON1XNOCASE.
|   3568: 13 05 00 25 0f 17 45 4e 41 42 4c 45 20 4a 53 4f   ...%..ENABLE JSO
|   3584: 4e 31 58 52 54 5f b9 4d 1a 12 05 00 29 0f 19 45   N1XRT_.M....)..E
|   3600: 4e 41 42 4c 45 20 47 45 4f 50 31 4c 59 58 42 49   NABLE GEOP1LYXBI
|   3616: 4e 41 52 58 1a 11 05 00 29 0f 19 45 4e 41 42 4c   NARX....)..ENABL
|   3632: 45 20 47 45 4f 50 4f 4c 59 58 4e 4f 43 41 53 45   E GEOPOLYXNOCASE
|   3648: 19 10 05 00 29 0f 17 45 4e 41 42 4c 45 20 57 45   ....)..ENABLE WE
|   3664: 4f 50 4f 4c 59 48 52 54 52 49 4d 17 0f 05 00 23   OPOLYHRTRIM....#
|   3680: 0f 19 45 4e 41 42 4c 45 20 46 54 53 35 58 42 49   ..ENABLE FTS5XBI
|   3696: 4e 41 53 59 17 0e 05 00 23 0f 19 45 4e 40 42 4b   NASY....#..EN@BK
|   3712: 45 20 46 54 53 35 58 4e 4f 43 41 53 45 16 0d 05   E FTS5XNOCASE...
|   3728: 00 23 0f 17 45 4e 41 42 4c 45 20 46 54 53 35 58   .#..ENABLE FTS5X
|   3744: 52 54 52 49 4d 17 0c 05 00 23 0f 19 45 4e 41 42   RTRIM....#..ENAB
|   3760: 4c 45 20 46 54 94 34 58 42 49 4e 41 52 59 17 0b   LE FT.4XBINARY..
|   3776: 05 00 23 0f 19 45 4e 41 42 4c 43 70 46 54 53 34   ..#..ENABLCpFTS4
|   3792: 58 4e 4f 43 41 53 45 16 0a 05 00 23 0f 17 45 4e   XNOCASE....#..EN
|   3808: 41 42 4c 45 20 46 54 53 34 58 52 54 52 49 4d 1e   ABLE FTS4XRTRIM.
|   3824: 09 05 00 31 0f 19 45 4e 41 42 4c 45 20 44 42 53   ...1..ENABLE DBS
|   3840: 54 41 54 20 56 54 41 42 58 42 49 4e 41 52 59 1e   TAT VTABXBINARY.
|   3856: 08 05 00 31 0f 19 45 4e 41 42 4c 45 20 44 32 53   ...1..ENABLE D2S
|   3872: 54 41 54 20 56 54 41 42 58 4e 4f 43 41 53 45 1d   TAT VTABXNOCASE.
|   3888: 07 05 00 31 0f 17 45 4e 41 42 4c 45 20 44 42 53   ...1..ENABLE DBS
|   3904: 54 41 54 20 56 54 41 42 58 52 54 52 49 4d 11 06   TAT VTABXRTRIM..
|   3920: 05 0b 27 0f 19 44 45 42 55 47 58 42 49 4e 41 52   ..'..DEBUGXBINAR
|   3936: 59 11 05 05 00 17 0f 19 44 45 42 55 47 58 4e 4f   Y.......DEBUGXNO
|   3952: 43 41 53 45 10 03 05 00 17 0f 17 44 45 42 55 47   CASE.......DEBUG
|   3968: 58 52 54 52 49 4d 27 03 05 00 43 0f 19 43 4f 4d   XRTRIM'...C..COM
|   3984: 50 49 4c 45 52 3d 67 63 63 2d 35 2e 34 2e 30 20   PILER=gcc-5.4.0 
|   4000: 32 30 31 36 30 36 30 39 58 42 49 4e 41 52 59 27   20160609XBINARY'
|   4016: 02 05 00 43 0f 19 43 4f 4d 50 49 4c 35 52 3d 67   ...C..COMPIL5R=g
|   4032: 63 63 2d 35 2e 34 2e 30 20 32 30 31 36 30 36 30   cc-5.4.0 2016060
|   4048: 39 58 4e 4f 43 41 53 45 26 01 05 00 43 0f 02 43   9XNOCASE&...C..C
|   4064: 4f 4d 50 49 4c 45 52 3d 67 63 63 2d 35 2e 34 2e   OMPILER=gcc-5.4.
|   4080: 30 20 32 30 31 36 30 36 30 39 58 00 00 00 00 00   0 20160609X.....
| page 5 offset 16384
|      0: 0d 00 00 00 02 0b a0 00 0c ad 0b a0 00 00 00 00   ................
|   2976: 82 0a 02 08 08 09 08 08 17 84 06 30 20 32 35 33   ...........0 253
|   2992: 00 01 30 04 25 06 1b 00 00 08 32 30 31 36 30 36   ..0.%.....201606
|   3008: 30 39 03 25 07 00 00 01 34 03 25 05 00 00 01 35   09.%....4.%....5
|   3024: 03 25 04 00 01 07 30 30 30 30 30 30 30 08 55 1a   .%....0000000.U.
|   3040: 00 00 08 63 6f 6d 70 69 6c 65 72 03 25 02 00 00   ...compiler.%...
|   3056: 06 64 62 73 74 61 74 03 25 0a 00 01 04 65 61 75   .dbstat.%....eau
|   3072: 67 03 25 08 00 00 06 65 6e 61 62 6c 65 09 25 09   g.%....enable.%.
|   3088: 05 04 04 04 04 04 00 01 08 78 74 65 6e 73 69 6f   .........xtensio
|   3104: 6e 03 25 1d 00 00 04 66 74 73 34 03 25 0d 00 03   n.%....fts4.%...
|   3120: 01 35 03 25 0f 00 00 0c 97 63 63 03 25 03 00 01   .5.%.....cc.%...
|   3136: 06 65 6f 70 6f 6c 7a 03 25 11 00 00 05 6a 73 6f   .eopolz.%....jso
|   3152: 6e 31 03 25 13 00 00 04 6c 6f 61 64 03 25 1c 00   n1.%....load.%..
|   3168: 00 03 6d 61 78 03 25 18 00 01 05 65 6d 6f 72 79   ..max.%....emory
|   3184: 03 25 3d f0 03 04 73 79 73 35 03 25 15 00 00 04   .%=...sys5.%....
|   3200: 6f 6d 69 74 03 25 1b 00 00 05 72 74 72 65 65 03   omit.%....rtree.
|   3216: 25 17 00 00 0a 74 68 72 65 61 64 73 61 66 65 03   %....threadsafe.
|   3232: 25 1e 00 00 04 76 74 61 62 03 25 0b 00 86 50 01   %....vtab.%...P.
|   3248: 08 08 08 09 08 17 8d 12 30 20 38 33 37 e3 aa e0   ........0 837...
|   3264: 12 d1 06 00 01 06 00 01 06 00 1f 03 00 01 03 00   ................
|   3280: 01 03 00 00 08 32 30 31 36 30 36 30 49 09 01 07   .....2016060I...
|   3296: 00 01 07 00 01 07 00 00 01 34 09 01 05 00 01 05   .........4......
|   3312: 00 01 05 00 00 01 35 09 01 04 00 01 04 00 01 04   ......5.........
|   3328: 00 01 07 30 30 30 30 30 30 30 09 1c 04 00 01 04   ...0000000......
|   3344: 00 01 04 00 00 06 62 69 6e 61 72 79 3c 03 01 02   ......binary<...
|   3360: 02 00 03 01 02 02 00 03 01 02 02 00 03 01 02 02   ................
|   3376: 00 03 01 02 02 00 03 01 02 02 00 03 01 02 02 00   ................
|   3392: 03 01 02 02 00 03 01 02 02 00 03 01 02 02 00 03   ................
|   3408: 01 02 02 00 03 01 02 02 00 00 08 63 6f 6d 70 69   ...........compi
|   3424: 6c 65 72 09 01 02 00 01 02 00 01 02 00 00 06 64   ler............d
|   3440: 62 73 74 61 74 09 07 03 00 01 03 00 01 03 00 01   bstat...........
|   3456: 04 65 62 75 67 09 04 01 f0 01 02 00 01 02 00 00   .ebug...........
|   3472: 06 65 6e 61 62 6c 65 3f 07 02 00 01 02 00 01 02   .enable?........
|   3488: 00 01 02 00 01 02 00 01 02 00 01 02 00 01 02 00   ................
|   3504: 01 02 00 01 02 00 01 02 00 01 02 00 01 02 00 01   ................
|   3520: 02 00 01 02 00 01 02 00 01 02 00 01 02 00 01 02   ................
|   3536: 00 01 02 00 01 02 00 01 08 78 74 65 6e 73 69 6f   .........xtensio
|   3552: 6e 09 1f 04 00 01 04 00 01 04 00 00 04 66 74 73   n............fts
|   3568: 34 09 0a 03 f3 01 03 00 01 03 00 19 01 35 09 0d   4............5..
|   3584: 03 00 01 03 00 01 03 00 00 03 67 63 63 09 01 03   ..........gcc...
|   3600: 00 01 03 00 01 03 00 01 06 65 6f 70 6f 6c 79 09   .........eopoly.
|   3616: 10 03 00 01 03 00 01 03 00 00 05 6a 73 6f 6e 31   ...........json1
|   3632: 09 13 03 00 01 03 00 00 f3 00 00 04 6c 6f 61 64   ............load
|   3648: 09 1f 03 00 01 03 00 01 03 00 00 03 6d 61 78 09   ............max.
|   3664: 1c 02 00 01 02 00 01 02 00 01 05 65 6d 6f 72 79   ...........emory
|   3680: 09 1c 03 00 01 03 00 01 03 00 03 04 73 79 73 35   ............sys5
|   3696: 09 16 03 00 01 03 00 01 03 00 00 06 6e 6f 63 61   ............noca
|   3712: 73 65 3c 02 01 02 02 00 03 01 02 02 00 03 01 02   se<.............
|   3728: 02 00 03 01 02 02 00 03 01 02 02 00 03 01 02 02   ................
|   3744: 00 03 01 02 02 00 03 01 02 02 00 03 01 02 02 00   ................
|   3760: 03 01 02 02 00 03 01 02 02 00 46 01 02 02 00 00   ..........F.....
|   3776: 04 6f 6d 69 74 09 1f 02 00 01 02 00 01 02 00 00   .omit...........
|   3792: 05 72 74 72 64 65 09 19 03 00 01 03 00 01 03 00   .rtrde..........
|   3808: 03 02 69 6d 3c 01 01 02 02 00 03 01 02 02 00 03   ..im<...........
|   3824: 01 02 02 00 03 01 02 01 ff 03 01 02 02 00 03 01   ................
|   3840: 02 02 00 03 01 02 02 00 03 01 02 02 00 03 01 02   ................
|   3856: 02 00 03 01 02 02 00 03 01 02 02 00 03 01 02 02   ................
|   3872: 00 00 0a 74 68 72 65 61 64 73 61 66 65 09 22 02   ...threadsafe...
|   3888: 00 01 02 00 01 02 00 00 04 76 74 61 62 09 07 04   .........vtab...
|   3904: 00 01 04 00 01 04 00 00 01 78 b4 01 01 01 01 02   .........x......
|   3920: 00 01 01 01 02 00 01 01 01 02 00 01 01 01 02 00   ................
|   3936: 01 01 01 02 00 01 01 01 02 00 01 01 01 02 00 01   ................
|   3952: 01 01 02 00 01 01 01 02 00 01 01 01 02 00 01 01   ................
|   3968: 01 02 00 01 01 01 02 00 01 01 01 02 00 01 01 01   ................
|   3984: 02 00 01 01 01 02 00 01 01 01 02 00 01 01 01 02   ................
|   4000: 00 01 01 01 02 00 01 01 01 02 00 01 01 01 02 00   ................
|   4016: 01 01 01 02 00 01 01 01 02 00 01 01 01 02 00 01   ................
|   4032: 01 01 02 00 01 01 01 02 00 01 01 01 02 00 01 01   ................
|   4048: 01 02 00 01 01 01 02 00 01 01 01 02 00 01 01 01   ................
|   4064: 02 00 01 01 01 02 00 01 01 01 02 00 01 01 02 02   ................
|   4080: 00 01 01 01 02 00 01 01 01 02 00 01 01 01 02 00   ................
| page 6 offset 20480
|      0: 0a 00 00 00 02 0f f5 00 0f fb 0f f5 00 00 00 00   ................
|   4080: 00 00 00 00 00 05 04 08 09 01 02 04 04 08 09 09   ................
| page 7 offset 24576
|      0: 0d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
|   4016: 00 00 00 00 00 00 00 00 0d 05 02 23 61 75 74 6f   ...........#auto
|   4032: 6d 65 71 97 65 3d 35 0d 04 02 23 6d 65 72 67 65   meq.e=5...#merge
|   4048: 3d 31 30 30 2c 38 11 03 02 2b 69 6e 74 65 67 72   =100,8...+integr
|   4064: 69 74 79 00 00 00 00 00 00 00 00 00 00 00 00 00   ity.............
| end crash-670b15f2955a36.db
}]} {}

do_catchsql_test 23.1 {
  SELECT 'FyzLy'FROM t1 WHERE t1 MATCH 'j';
} {1 {database disk image is malformed}}

finish_test

  if( nIn<4 ) return -1;
  n = (unsigned int)nIn;
  a = sqlite3_malloc64( nAlloc );
  if( a==0 ){
    fprintf(stderr, "Out of memory!\n");
    exit(1);
  }
  memset(a, 0, nAlloc);
  for(i=k=0; i<n; i++){
    unsigned char c = (unsigned char)zIn[i];
    if( isxdigit(c) ){
      k++;
      if( k & 1 ){
        b = hexToInt(c)*16;
      }else{
................................................................................
          }
          a = sqlite3_realloc64( a, newSize );
          if( a==0 ){
            fprintf(stderr, "Out of memory!\n");
            exit(1);
          }
          assert( newSize > nAlloc );
          memset(a+nAlloc, 0, newSize - nAlloc);
          nAlloc = newSize;
        }
        if( j>=(unsigned)mx ){
          mx = (j + 4095)&~4095;
          if( mx>MX_FILE_SZ ) mx = MX_FILE_SZ;
        }
        assert( j<nAlloc );

  if( nIn<4 ) return -1;
  n = (unsigned int)nIn;
  a = sqlite3_malloc64( nAlloc );
  if( a==0 ){
    fprintf(stderr, "Out of memory!\n");
    exit(1);
  }
  memset(a, 0, (size_t)nAlloc);
  for(i=k=0; i<n; i++){
    unsigned char c = (unsigned char)zIn[i];
    if( isxdigit(c) ){
      k++;
      if( k & 1 ){
        b = hexToInt(c)*16;
      }else{
................................................................................
          }
          a = sqlite3_realloc64( a, newSize );
          if( a==0 ){
            fprintf(stderr, "Out of memory!\n");
            exit(1);
          }
          assert( newSize > nAlloc );
          memset(a+nAlloc, 0, (size_t)(newSize - nAlloc));
          nAlloc = newSize;
        }
        if( j>=(unsigned)mx ){
          mx = (j + 4095)&~4095;
          if( mx>MX_FILE_SZ ) mx = MX_FILE_SZ;
        }
        assert( j<nAlloc );

  set rc [catch {db deserialize a b c} msg]
  lappend rc $msg
} {1 {unknown option: a}}
do_test 620 {
  set rc [catch {db serialize a b} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db serialize ?DATABASE?"}}

















finish_test

  set rc [catch {db deserialize a b c} msg]
  lappend rc $msg
} {1 {unknown option: a}}
do_test 620 {
  set rc [catch {db serialize a b} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db serialize ?DATABASE?"}}

#-------------------------------------------------------------------------
reset_db
do_execsql_test 700 {
  CREATE TABLE t1(a, b);
  PRAGMA schema_version = 0;
}
do_test 710 {
  set ser [db serialize main]
  db close
  sqlite3 db
  db deserialize main $ser
  catchsql {
    CREATE VIRTUAL TABLE t1 USING rtree(id, a, b, c, d);
  }
} {1 {table t1 already exists}}

finish_test

static int conflictCall(
  void *NotUsed,
  int eConflict,
  sqlite3_changeset_iter *p
){
  (void)NotUsed;
  (void)p;
  printf("Conflict %d\n", eConflict);
  return SQLITE_CHANGESET_OMIT;
}

/*
** Reset the database file
*/
static void db_reset(sqlite3 *db){

static int conflictCall(
  void *NotUsed,
  int eConflict,
  sqlite3_changeset_iter *p
){
  (void)NotUsed;
  (void)p;

  return SQLITE_CHANGESET_OMIT;
}

/*
** Reset the database file
*/
static void db_reset(sqlite3 *db){

  execsql { VACUUM INTO target() }
  file exists test.db2
} 1
do_catchsql_test vacuum-into-420 {
  VACUUM INTO target2()
} {1 {no such function: target2}}















finish_test

  execsql { VACUUM INTO target() }
  file exists test.db2
} 1
do_catchsql_test vacuum-into-420 {
  VACUUM INTO target2()
} {1 {no such function: target2}}

# The ability to VACUUM INTO a read-only database
db close
sqlite3 db test.db -readonly 1
forcedelete test.db2
do_execsql_test vacuum-into-500 {
  VACUUM INTO 'test.db2';
}
sqlite3 db2 test.db2
do_test vacuum-into-510 {
  db2 eval {SELECT name FROM sqlite_master ORDER BY 1}
} {t1 t1b t2}
db2 close
db close

finish_test

} {6 6 6}

do_execsql_test 17.3 {
  SELECT 10+sum(a) OVER (ORDER BY a) 
  FROM t8 
  ORDER BY 10+sum(a) OVER (ORDER BY a) DESC;
} {16 13 11}





























finish_test

} {6 6 6}

do_execsql_test 17.3 {
  SELECT 10+sum(a) OVER (ORDER BY a) 
  FROM t8 
  ORDER BY 10+sum(a) OVER (ORDER BY a) DESC;
} {16 13 11}

#-------------------------------------------------------------------------
#
reset_db
do_execsql_test 18.0 {
  CREATE TABLE t1 ( t1_id INTEGER PRIMARY KEY );
  CREATE TABLE t2 ( t2_id INTEGER PRIMARY KEY );
  CREATE TABLE t3 ( t3_id INTEGER PRIMARY KEY );

  INSERT INTO t1 VALUES(1),  (3), (5);
  INSERT INTO t2 VALUES      (3), (5);
  INSERT INTO t3 VALUES(10), (11), (12);
}

do_execsql_test 18.1 {
  SELECT t1.* FROM t1, t2 WHERE 
    t1_id=t2_id AND t1_id IN (
        SELECT t1_id + row_number() OVER ( ORDER BY t1_id ) FROM t3
    )
}

do_execsql_test 18.2 {
  SELECT t1.* FROM t1, t2 WHERE 
    t1_id=t2_id AND t1_id IN (
        SELECT         row_number() OVER ( ORDER BY t1_id ) FROM t3
    )
} {3}


finish_test

#!/bin/sh
# \
exec tclsh  "$0" ${1+"$@"}

# A wrapper around cg_annotate that sets appropriate command-line options
# and rearranges the output so that annotated files occur in a consistent
# sorted order.  Used by the speed-check.tcl script.
#

set in [open "|cg_annotate --show=Ir --auto=yes --context=40 $argv" r]
set dest !

#!/bin/sh
# \
exec tclsh "$0" ${1+"$@"}
#
# A wrapper around cg_annotate that sets appropriate command-line options
# and rearranges the output so that annotated files occur in a consistent
# sorted order.  Used by the speed-check.tcl script.
#

set in [open "|cg_annotate --show=Ir --auto=yes --context=40 $argv" r]
set dest !

#!/usr/bin/tclsh
#
# Given an sqlite3.c source file identified by the command-line
# argument, extract the "sqlite3.h" header file that is embedded inside
# the sqlite3.c source file and write it to standard output.
#
if {[llength $argv]!=1} {
  puts stderr "Usage: $argv0 sqlite3.c >sqlite3.h"
  exit 1
}
set in [open [lindex $argv 0] rb]
while {![eof $in]} {
  set line [gets $in]
  if {[string match {* Begin file sqlite3.h *} $line]} break
}
while {![eof $in]} {
  set line [gets $in]
  if {[string match {* End of sqlite3.h *} $line]} break
  puts $line
}
close $in

  }
  if( nLocal<nPayload ){
    int ovfl = decodeInt32(a+nLocal);
    int cnt = 0;
    while( ovfl && (cnt++)<g.mxPage ){
      page_usage_msg(ovfl, "overflow %d from cell %d of page %d",
                     cnt, cellno, pgno);
      a = fileRead((ovfl-1)*g.pagesize, 4);
      ovfl = decodeInt32(a);
      sqlite3_free(a);
    }
  }
}

  }
  if( nLocal<nPayload ){
    int ovfl = decodeInt32(a+nLocal);
    int cnt = 0;
    while( ovfl && (cnt++)<g.mxPage ){
      page_usage_msg(ovfl, "overflow %d from cell %d of page %d",
                     cnt, cellno, pgno);
      a = fileRead((ovfl-1)*(sqlite3_int64)g.pagesize, 4);
      ovfl = decodeInt32(a);
      sqlite3_free(a);
    }
  }
}