# also be noted here that building any target with these "stdcall" options
# will most likely fail if the Tcl library is also required.  This is due
# to how the Tcl library functions are declared and exported (i.e. without
# an explicit calling convention, which results in "cdecl").
#
!IF $(USE_STDCALL)!=0
!IF "$(PLATFORM)"=="x86"
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
!ELSE
!IFNDEF PLATFORM
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF
!ENDIF
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF

# These are additional compiler options used for the core library.
#
!IFNDEF CORE_COMPILE_OPTS
!IF $(USE_STDCALL)!=0
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
!ELSE
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
!ENDIF
!ENDIF

# These are the additional targets that the core library should depend on
# when linking.
#
!IFNDEF CORE_LINK_DEP
!IF $(USE_STDCALL)!=0
CORE_LINK_DEP =
!ELSE
CORE_LINK_DEP = sqlite3.def
!ENDIF
!ENDIF

# These are additional linker options used for the core library.
#
!IFNDEF CORE_LINK_OPTS
!IF $(USE_STDCALL)!=0
CORE_LINK_OPTS =
!ELSE
CORE_LINK_OPTS = /DEF:sqlite3.def
!ENDIF
!ENDIF

# These are additional compiler options used for the shell executable.

# also be noted here that building any target with these "stdcall" options
# will most likely fail if the Tcl library is also required.  This is due
# to how the Tcl library functions are declared and exported (i.e. without
# an explicit calling convention, which results in "cdecl").
#
!IF $(USE_STDCALL)!=0
!IF "$(PLATFORM)"=="x86"
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
!ELSE
!IFNDEF PLATFORM
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF
!ENDIF
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF

# These are additional compiler options used for the core library.
#
!IFNDEF CORE_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
!ELSE
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
!ENDIF
!ENDIF

# These are the additional targets that the core library should depend on
# when linking.
#
!IFNDEF CORE_LINK_DEP
!IF $(DYNAMIC_SHELL)!=0
CORE_LINK_DEP =
!ELSE
CORE_LINK_DEP = sqlite3.def
!ENDIF
!ENDIF

# These are additional linker options used for the core library.
#
!IFNDEF CORE_LINK_OPTS
!IF $(DYNAMIC_SHELL)!=0
CORE_LINK_OPTS =
!ELSE
CORE_LINK_OPTS = /DEF:sqlite3.def
!ENDIF
!ENDIF

# These are additional compiler options used for the shell executable.

  char *zCsr;                     /* Space for holding column names */
  int nDb;                        /* Bytes required to hold database name */
  int nName;                      /* Bytes required to hold table name */
  int isFts4 = (argv[0][3]=='4'); /* True for FTS4, false for FTS3 */
  const char **aCol;              /* Array of column names */
  sqlite3_tokenizer *pTokenizer = 0;        /* Tokenizer for this table */

  int nIndex;                     /* Size of aIndex[] array */
  struct Fts3Index *aIndex = 0;   /* Array of indexes for this table */

  /* The results of parsing supported FTS4 key=value options: */
  int bNoDocsize = 0;             /* True to omit %_docsize table */
  int bDescIdx = 0;               /* True to store descending indexes */
  char *zPrefix = 0;              /* Prefix parameter value (or NULL) */
  char *zCompress = 0;            /* compress=? parameter (or NULL) */

  char *zCsr;                     /* Space for holding column names */
  int nDb;                        /* Bytes required to hold database name */
  int nName;                      /* Bytes required to hold table name */
  int isFts4 = (argv[0][3]=='4'); /* True for FTS4, false for FTS3 */
  const char **aCol;              /* Array of column names */
  sqlite3_tokenizer *pTokenizer = 0;        /* Tokenizer for this table */

  int nIndex = 0;                 /* Size of aIndex[] array */
  struct Fts3Index *aIndex = 0;   /* Array of indexes for this table */

  /* The results of parsing supported FTS4 key=value options: */
  int bNoDocsize = 0;             /* True to omit %_docsize table */
  int bDescIdx = 0;               /* True to store descending indexes */
  char *zPrefix = 0;              /* Prefix parameter value (or NULL) */
  char *zCompress = 0;            /* compress=? parameter (or NULL) */

**
** The caller must ensure that the cursor is valid (has eState==CURSOR_VALID)
** prior to calling this routine.  
*/
static int saveCursorPosition(BtCursor *pCur){
  int rc;

  assert( CURSOR_VALID==pCur->eState );
  assert( 0==pCur->pKey );
  assert( cursorHoldsMutex(pCur) );






  rc = sqlite3BtreeKeySize(pCur, &pCur->nKey);
  assert( rc==SQLITE_OK );  /* KeySize() cannot fail */

  /* If this is an intKey table, then the above call to BtreeKeySize()
  ** stores the integer key in pCur->nKey. In this case this value is
  ** all that is required. Otherwise, if pCur is not open on an intKey
  ** table, then malloc space for and store the pCur->nKey bytes of key 
................................................................................
static int SQLITE_NOINLINE saveCursorsOnList(
  BtCursor *p,         /* The first cursor that needs saving */
  Pgno iRoot,          /* Only save cursor with this iRoot. Save all if zero */
  BtCursor *pExcept    /* Do not save this cursor */
){
  do{
    if( p!=pExcept && (0==iRoot || p->pgnoRoot==iRoot) ){
      if( p->eState==CURSOR_VALID ){
        int rc = saveCursorPosition(p);
        if( SQLITE_OK!=rc ){
          return rc;
        }
      }else{
        testcase( p->iPage>0 );
        btreeReleaseAllCursorPages(p);
................................................................................
** when saveCursorPosition() was called. Note that this call deletes the 
** saved position info stored by saveCursorPosition(), so there can be
** at most one effective restoreCursorPosition() call after each 
** saveCursorPosition().
*/
static int btreeRestoreCursorPosition(BtCursor *pCur){
  int rc;

  assert( cursorHoldsMutex(pCur) );
  assert( pCur->eState>=CURSOR_REQUIRESEEK );
  if( pCur->eState==CURSOR_FAULT ){
    return pCur->skipNext;
  }
  pCur->eState = CURSOR_INVALID;
  rc = btreeMoveto(pCur, pCur->pKey, pCur->nKey, 0, &pCur->skipNext);
  if( rc==SQLITE_OK ){
    sqlite3_free(pCur->pKey);
    pCur->pKey = 0;
    assert( pCur->eState==CURSOR_VALID || pCur->eState==CURSOR_INVALID );

    if( pCur->skipNext && pCur->eState==CURSOR_VALID ){
      pCur->eState = CURSOR_SKIPNEXT;
    }
  }
  return rc;
}

................................................................................
  assert( pCur!=0 );
  assert( pCur->eState!=CURSOR_VALID );
  rc = restoreCursorPosition(pCur);
  if( rc ){
    *pDifferentRow = 1;
    return rc;
  }
  if( pCur->eState!=CURSOR_VALID || NEVER(pCur->skipNext!=0) ){
    *pDifferentRow = 1;
  }else{

    *pDifferentRow = 0;
  }
  return SQLITE_OK;
}

#ifndef SQLITE_OMIT_AUTOVACUUM
/*
................................................................................

  assert( (writeOnly==0 || writeOnly==1) && BTCF_WriteFlag==1 );
  if( pBtree ){
    sqlite3BtreeEnter(pBtree);
    for(p=pBtree->pBt->pCursor; p; p=p->pNext){
      int i;
      if( writeOnly && (p->curFlags & BTCF_WriteFlag)==0 ){
        if( p->eState==CURSOR_VALID ){
          rc = saveCursorPosition(p);
          if( rc!=SQLITE_OK ){
            (void)sqlite3BtreeTripAllCursors(pBtree, rc, 0);
            break;
          }
        }
      }else{
................................................................................
** Failure is not possible.  This function always returns SQLITE_OK.
** It might just as well be a procedure (returning void) but we continue
** to return an integer result code for historical reasons.
*/
int sqlite3BtreeDataSize(BtCursor *pCur, u32 *pSize){
  assert( cursorHoldsMutex(pCur) );
  assert( pCur->eState==CURSOR_VALID );


  assert( pCur->apPage[pCur->iPage]->intKeyLeaf==1 );
  getCellInfo(pCur);
  *pSize = pCur->info.nPayload;
  return SQLITE_OK;
}

/*
................................................................................
  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
  if( pNewPage->nCell<1 || pNewPage->intKey!=pCur->apPage[i]->intKey ){
    return SQLITE_CORRUPT_BKPT;
  }
  return SQLITE_OK;
}

#if 0
/*
** Page pParent is an internal (non-leaf) tree page. This function 
** asserts that page number iChild is the left-child if the iIdx'th
** cell in page pParent. Or, if iIdx is equal to the total number of
** cells in pParent, that page number iChild is the right-child of
** the page.
*/
static void assertParentIndex(MemPage *pParent, int iIdx, Pgno iChild){


  assert( iIdx<=pParent->nCell );
  if( iIdx==pParent->nCell ){
    assert( get4byte(&pParent->aData[pParent->hdrOffset+8])==iChild );
  }else{
    assert( get4byte(findCell(pParent, iIdx))==iChild );
  }
}
................................................................................
** the largest cell index.
*/
static void moveToParent(BtCursor *pCur){
  assert( cursorHoldsMutex(pCur) );
  assert( pCur->eState==CURSOR_VALID );
  assert( pCur->iPage>0 );
  assert( pCur->apPage[pCur->iPage] );

  /* UPDATE: It is actually possible for the condition tested by the assert
  ** below to be untrue if the database file is corrupt. This can occur if
  ** one cursor has modified page pParent while a reference to it is held 
  ** by a second cursor. Which can only happen if a single page is linked
  ** into more than one b-tree structure in a corrupt database.  */
#if 0
  assertParentIndex(
    pCur->apPage[pCur->iPage-1], 
    pCur->aiIdx[pCur->iPage-1], 
    pCur->apPage[pCur->iPage]->pgno
  );
#endif
  testcase( pCur->aiIdx[pCur->iPage-1] > pCur->apPage[pCur->iPage-1]->nCell );

  releasePage(pCur->apPage[pCur->iPage]);
  pCur->iPage--;
  pCur->info.nSize = 0;
  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
}
................................................................................
      }

      pPage->nOverflow = 0;

      /* The next iteration of the do-loop balances the parent page. */
      releasePage(pPage);
      pCur->iPage--;

    }
  }while( rc==SQLITE_OK );

  if( pFree ){
    sqlite3PageFree(pFree);
  }
  return rc;
................................................................................
){
  MemPage *pPage;
  int rc;
  unsigned char *pCell;
  int i;
  int hdr;
  u16 szCell;


  assert( sqlite3_mutex_held(pBt->mutex) );
  if( pgno>btreePagecount(pBt) ){
    return SQLITE_CORRUPT_BKPT;
  }

  rc = getAndInitPage(pBt, pgno, &pPage, 0);
  if( rc ) return rc;


  hdr = pPage->hdrOffset;
  for(i=0; i<pPage->nCell; i++){
    pCell = findCell(pPage, i);
    if( !pPage->leaf ){
      rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange);
      if( rc ) goto cleardatabasepage_out;
    }
    rc = clearCell(pPage, pCell, &szCell);
    if( rc ) goto cleardatabasepage_out;
  }
  if( !pPage->leaf ){
    rc = clearDatabasePage(pBt, get4byte(&pPage->aData[hdr+8]), 1, pnChange);
    if( rc ) goto cleardatabasepage_out;
  }else if( pnChange ){
    assert( pPage->intKey );
    *pnChange += pPage->nCell;
  }
  if( freePageFlag ){

**
** The caller must ensure that the cursor is valid (has eState==CURSOR_VALID)
** prior to calling this routine.  
*/
static int saveCursorPosition(BtCursor *pCur){
  int rc;

  assert( CURSOR_VALID==pCur->eState || CURSOR_SKIPNEXT==pCur->eState );
  assert( 0==pCur->pKey );
  assert( cursorHoldsMutex(pCur) );

  if( pCur->eState==CURSOR_SKIPNEXT ){
    pCur->eState = CURSOR_VALID;
  }else{
    pCur->skipNext = 0;
  }
  rc = sqlite3BtreeKeySize(pCur, &pCur->nKey);
  assert( rc==SQLITE_OK );  /* KeySize() cannot fail */

  /* If this is an intKey table, then the above call to BtreeKeySize()
  ** stores the integer key in pCur->nKey. In this case this value is
  ** all that is required. Otherwise, if pCur is not open on an intKey
  ** table, then malloc space for and store the pCur->nKey bytes of key 
................................................................................
static int SQLITE_NOINLINE saveCursorsOnList(
  BtCursor *p,         /* The first cursor that needs saving */
  Pgno iRoot,          /* Only save cursor with this iRoot. Save all if zero */
  BtCursor *pExcept    /* Do not save this cursor */
){
  do{
    if( p!=pExcept && (0==iRoot || p->pgnoRoot==iRoot) ){
      if( p->eState==CURSOR_VALID || p->eState==CURSOR_SKIPNEXT ){
        int rc = saveCursorPosition(p);
        if( SQLITE_OK!=rc ){
          return rc;
        }
      }else{
        testcase( p->iPage>0 );
        btreeReleaseAllCursorPages(p);
................................................................................
** when saveCursorPosition() was called. Note that this call deletes the 
** saved position info stored by saveCursorPosition(), so there can be
** at most one effective restoreCursorPosition() call after each 
** saveCursorPosition().
*/
static int btreeRestoreCursorPosition(BtCursor *pCur){
  int rc;
  int skipNext;
  assert( cursorHoldsMutex(pCur) );
  assert( pCur->eState>=CURSOR_REQUIRESEEK );
  if( pCur->eState==CURSOR_FAULT ){
    return pCur->skipNext;
  }
  pCur->eState = CURSOR_INVALID;
  rc = btreeMoveto(pCur, pCur->pKey, pCur->nKey, 0, &skipNext);
  if( rc==SQLITE_OK ){
    sqlite3_free(pCur->pKey);
    pCur->pKey = 0;
    assert( pCur->eState==CURSOR_VALID || pCur->eState==CURSOR_INVALID );
    pCur->skipNext |= skipNext;
    if( pCur->skipNext && pCur->eState==CURSOR_VALID ){
      pCur->eState = CURSOR_SKIPNEXT;
    }
  }
  return rc;
}

................................................................................
  assert( pCur!=0 );
  assert( pCur->eState!=CURSOR_VALID );
  rc = restoreCursorPosition(pCur);
  if( rc ){
    *pDifferentRow = 1;
    return rc;
  }
  if( pCur->eState!=CURSOR_VALID ){
    *pDifferentRow = 1;
  }else{
    assert( pCur->skipNext==0 );
    *pDifferentRow = 0;
  }
  return SQLITE_OK;
}

#ifndef SQLITE_OMIT_AUTOVACUUM
/*
................................................................................

  assert( (writeOnly==0 || writeOnly==1) && BTCF_WriteFlag==1 );
  if( pBtree ){
    sqlite3BtreeEnter(pBtree);
    for(p=pBtree->pBt->pCursor; p; p=p->pNext){
      int i;
      if( writeOnly && (p->curFlags & BTCF_WriteFlag)==0 ){
        if( p->eState==CURSOR_VALID || p->eState==CURSOR_SKIPNEXT ){
          rc = saveCursorPosition(p);
          if( rc!=SQLITE_OK ){
            (void)sqlite3BtreeTripAllCursors(pBtree, rc, 0);
            break;
          }
        }
      }else{
................................................................................
** Failure is not possible.  This function always returns SQLITE_OK.
** It might just as well be a procedure (returning void) but we continue
** to return an integer result code for historical reasons.
*/
int sqlite3BtreeDataSize(BtCursor *pCur, u32 *pSize){
  assert( cursorHoldsMutex(pCur) );
  assert( pCur->eState==CURSOR_VALID );
  assert( pCur->iPage>=0 );
  assert( pCur->iPage<BTCURSOR_MAX_DEPTH );
  assert( pCur->apPage[pCur->iPage]->intKeyLeaf==1 );
  getCellInfo(pCur);
  *pSize = pCur->info.nPayload;
  return SQLITE_OK;
}

/*
................................................................................
  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
  if( pNewPage->nCell<1 || pNewPage->intKey!=pCur->apPage[i]->intKey ){
    return SQLITE_CORRUPT_BKPT;
  }
  return SQLITE_OK;
}

#if SQLITE_DEBUG
/*
** Page pParent is an internal (non-leaf) tree page. This function 
** asserts that page number iChild is the left-child if the iIdx'th
** cell in page pParent. Or, if iIdx is equal to the total number of
** cells in pParent, that page number iChild is the right-child of
** the page.
*/
static void assertParentIndex(MemPage *pParent, int iIdx, Pgno iChild){
  if( CORRUPT_DB ) return;  /* The conditions tested below might not be true
                            ** in a corrupt database */
  assert( iIdx<=pParent->nCell );
  if( iIdx==pParent->nCell ){
    assert( get4byte(&pParent->aData[pParent->hdrOffset+8])==iChild );
  }else{
    assert( get4byte(findCell(pParent, iIdx))==iChild );
  }
}
................................................................................
** the largest cell index.
*/
static void moveToParent(BtCursor *pCur){
  assert( cursorHoldsMutex(pCur) );
  assert( pCur->eState==CURSOR_VALID );
  assert( pCur->iPage>0 );
  assert( pCur->apPage[pCur->iPage] );







  assertParentIndex(
    pCur->apPage[pCur->iPage-1], 
    pCur->aiIdx[pCur->iPage-1], 
    pCur->apPage[pCur->iPage]->pgno
  );

  testcase( pCur->aiIdx[pCur->iPage-1] > pCur->apPage[pCur->iPage-1]->nCell );

  releasePage(pCur->apPage[pCur->iPage]);
  pCur->iPage--;
  pCur->info.nSize = 0;
  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
}
................................................................................
      }

      pPage->nOverflow = 0;

      /* The next iteration of the do-loop balances the parent page. */
      releasePage(pPage);
      pCur->iPage--;
      assert( pCur->iPage>=0 );
    }
  }while( rc==SQLITE_OK );

  if( pFree ){
    sqlite3PageFree(pFree);
  }
  return rc;
................................................................................
){
  MemPage *pPage;
  int rc;
  unsigned char *pCell;
  int i;
  int hdr;
  u16 szCell;
  u8 hasChildren;

  assert( sqlite3_mutex_held(pBt->mutex) );
  if( pgno>btreePagecount(pBt) ){
    return SQLITE_CORRUPT_BKPT;
  }

  rc = getAndInitPage(pBt, pgno, &pPage, 0);
  if( rc ) return rc;
  hasChildren = !pPage->leaf;
  pPage->leaf = 1;  /* Block looping if the database is corrupt */
  hdr = pPage->hdrOffset;
  for(i=0; i<pPage->nCell; i++){
    pCell = findCell(pPage, i);
    if( hasChildren ){
      rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange);
      if( rc ) goto cleardatabasepage_out;
    }
    rc = clearCell(pPage, pCell, &szCell);
    if( rc ) goto cleardatabasepage_out;
  }
  if( hasChildren ){
    rc = clearDatabasePage(pBt, get4byte(&pPage->aData[hdr+8]), 1, pnChange);
    if( rc ) goto cleardatabasepage_out;
  }else if( pnChange ){
    assert( pPage->intKey );
    *pnChange += pPage->nCell;
  }
  if( freePageFlag ){

#if !defined(SQLITE_OMIT_TRACE) && defined(SQLITE_ENABLE_IOTRACE)
/*
** If the following function pointer is not NULL and if
** SQLITE_ENABLE_IOTRACE is enabled, then messages describing
** I/O active are written using this function.  These messages
** are intended for debugging activity only.
*/
/* not-private */ void (*sqlite3IoTrace)(const char*, ...) = 0;
#endif

/*
** If the following global variable points to a string which is the
** name of a directory, then that directory will be used to store
** temporary files.
**

#if !defined(SQLITE_OMIT_TRACE) && defined(SQLITE_ENABLE_IOTRACE)
/*
** If the following function pointer is not NULL and if
** SQLITE_ENABLE_IOTRACE is enabled, then messages describing
** I/O active are written using this function.  These messages
** are intended for debugging activity only.
*/
SQLITE_API void (SQLITE_CDECL *sqlite3IoTrace)(const char*, ...) = 0;
#endif

/*
** If the following global variable points to a string which is the
** name of a directory, then that directory will be used to store
** temporary files.
**

  sqlite3_soft_heap_limit64(n);
}

/*
** Initialize the memory allocation subsystem.
*/
int sqlite3MallocInit(void){

  if( sqlite3GlobalConfig.m.xMalloc==0 ){
    sqlite3MemSetDefault();
  }
  memset(&mem0, 0, sizeof(mem0));
  if( sqlite3GlobalConfig.bCoreMutex ){
    mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
  }
................................................................................
  }
  if( sqlite3GlobalConfig.pPage==0 || sqlite3GlobalConfig.szPage<512
      || sqlite3GlobalConfig.nPage<1 ){
    sqlite3GlobalConfig.pPage = 0;
    sqlite3GlobalConfig.szPage = 0;
    sqlite3GlobalConfig.nPage = 0;
  }
  return sqlite3GlobalConfig.m.xInit(sqlite3GlobalConfig.m.pAppData);


}

/*
** Return true if the heap is currently under memory pressure - in other
** words if the amount of heap used is close to the limit set by
** sqlite3_soft_heap_limit().
*/

  sqlite3_soft_heap_limit64(n);
}

/*
** Initialize the memory allocation subsystem.
*/
int sqlite3MallocInit(void){
  int rc;
  if( sqlite3GlobalConfig.m.xMalloc==0 ){
    sqlite3MemSetDefault();
  }
  memset(&mem0, 0, sizeof(mem0));
  if( sqlite3GlobalConfig.bCoreMutex ){
    mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
  }
................................................................................
  }
  if( sqlite3GlobalConfig.pPage==0 || sqlite3GlobalConfig.szPage<512
      || sqlite3GlobalConfig.nPage<1 ){
    sqlite3GlobalConfig.pPage = 0;
    sqlite3GlobalConfig.szPage = 0;
    sqlite3GlobalConfig.nPage = 0;
  }
  rc = sqlite3GlobalConfig.m.xInit(sqlite3GlobalConfig.m.pAppData);
  if( rc!=SQLITE_OK ) memset(&mem0, 0, sizeof(mem0));
  return rc;
}

/*
** Return true if the heap is currently under memory pressure - in other
** words if the amount of heap used is close to the limit set by
** sqlite3_soft_heap_limit().
*/

  }
  return 0;
}

/*
** Log a I/O error retry episode.
*/
static void winLogIoerr(int nRetry){
  if( nRetry ){
    sqlite3_log(SQLITE_IOERR,
      "delayed %dms for lock/sharing conflict",
      winIoerrRetryDelay*nRetry*(nRetry+1)/2
    );
  }
}

#if SQLITE_OS_WINCE
/*************************************************************************
** This section contains code for WinCE only.
................................................................................
  winFile *pFile = (winFile*)id;

  assert( id!=0 );
#ifndef SQLITE_OMIT_WAL
  assert( pFile->pShm==0 );
#endif
  assert( pFile->h!=NULL && pFile->h!=INVALID_HANDLE_VALUE );
  OSTRACE(("CLOSE file=%p\n", pFile->h));


#if SQLITE_MAX_MMAP_SIZE>0
  winUnmapfile(pFile);
#endif

  do{
    rc = osCloseHandle(pFile->h);
................................................................................
    sqlite3_free(pFile->zDeleteOnClose);
  }
#endif
  if( rc ){
    pFile->h = NULL;
  }
  OpenCounter(-1);

  OSTRACE(("CLOSE file=%p, rc=%s\n", pFile->h, rc ? "ok" : "failed"));
  return rc ? SQLITE_OK
            : winLogError(SQLITE_IOERR_CLOSE, osGetLastError(),
                          "winClose", pFile->zPath);
}

/*
** Read data from a file into a buffer.  Return SQLITE_OK if all
................................................................................
  DWORD nRead;                    /* Number of bytes actually read from file */
  int nRetry = 0;                 /* Number of retrys */

  assert( id!=0 );
  assert( amt>0 );
  assert( offset>=0 );
  SimulateIOError(return SQLITE_IOERR_READ);
  OSTRACE(("READ file=%p, buffer=%p, amount=%d, offset=%lld, lock=%d\n",

           pFile->h, pBuf, amt, offset, pFile->locktype));

#if SQLITE_MAX_MMAP_SIZE>0
  /* Deal with as much of this read request as possible by transfering
  ** data from the memory mapping using memcpy().  */
  if( offset<pFile->mmapSize ){
    if( offset+amt <= pFile->mmapSize ){
      memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], amt);
      OSTRACE(("READ-MMAP file=%p, rc=SQLITE_OK\n", pFile->h));

      return SQLITE_OK;
    }else{
      int nCopy = (int)(pFile->mmapSize - offset);
      memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], nCopy);
      pBuf = &((u8 *)pBuf)[nCopy];
      amt -= nCopy;
      offset += nCopy;
    }
  }
#endif

#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
  if( winSeekFile(pFile, offset) ){
    OSTRACE(("READ file=%p, rc=SQLITE_FULL\n", pFile->h));

    return SQLITE_FULL;
  }
  while( !osReadFile(pFile->h, pBuf, amt, &nRead, 0) ){
#else
  memset(&overlapped, 0, sizeof(OVERLAPPED));
  overlapped.Offset = (LONG)(offset & 0xffffffff);
  overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff);
  while( !osReadFile(pFile->h, pBuf, amt, &nRead, &overlapped) &&
         osGetLastError()!=ERROR_HANDLE_EOF ){
#endif
    DWORD lastErrno;
    if( winRetryIoerr(&nRetry, &lastErrno) ) continue;
    pFile->lastErrno = lastErrno;
    OSTRACE(("READ file=%p, rc=SQLITE_IOERR_READ\n", pFile->h));

    return winLogError(SQLITE_IOERR_READ, pFile->lastErrno,
                       "winRead", pFile->zPath);
  }
  winLogIoerr(nRetry);
  if( nRead<(DWORD)amt ){
    /* Unread parts of the buffer must be zero-filled */
    memset(&((char*)pBuf)[nRead], 0, amt-nRead);
    OSTRACE(("READ file=%p, rc=SQLITE_IOERR_SHORT_READ\n", pFile->h));

    return SQLITE_IOERR_SHORT_READ;
  }

  OSTRACE(("READ file=%p, rc=SQLITE_OK\n", pFile->h));

  return SQLITE_OK;
}

/*
** Write data from a buffer into a file.  Return SQLITE_OK on success
** or some other error code on failure.
*/
................................................................................
  int nRetry = 0;                 /* Number of retries */

  assert( amt>0 );
  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_WRITE);
  SimulateDiskfullError(return SQLITE_FULL);

  OSTRACE(("WRITE file=%p, buffer=%p, amount=%d, offset=%lld, lock=%d\n",

           pFile->h, pBuf, amt, offset, pFile->locktype));

#if SQLITE_MAX_MMAP_SIZE>0
  /* Deal with as much of this write request as possible by transfering
  ** data from the memory mapping using memcpy().  */
  if( offset<pFile->mmapSize ){
    if( offset+amt <= pFile->mmapSize ){
      memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, amt);
      OSTRACE(("WRITE-MMAP file=%p, rc=SQLITE_OK\n", pFile->h));

      return SQLITE_OK;
    }else{
      int nCopy = (int)(pFile->mmapSize - offset);
      memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, nCopy);
      pBuf = &((u8 *)pBuf)[nCopy];
      amt -= nCopy;
      offset += nCopy;
................................................................................
      rc = 1;
    }
  }

  if( rc ){
    if(   ( pFile->lastErrno==ERROR_HANDLE_DISK_FULL )
       || ( pFile->lastErrno==ERROR_DISK_FULL )){
      OSTRACE(("WRITE file=%p, rc=SQLITE_FULL\n", pFile->h));

      return winLogError(SQLITE_FULL, pFile->lastErrno,
                         "winWrite1", pFile->zPath);
    }
    OSTRACE(("WRITE file=%p, rc=SQLITE_IOERR_WRITE\n", pFile->h));

    return winLogError(SQLITE_IOERR_WRITE, pFile->lastErrno,
                       "winWrite2", pFile->zPath);
  }else{
    winLogIoerr(nRetry);
  }
  OSTRACE(("WRITE file=%p, rc=SQLITE_OK\n", pFile->h));

  return SQLITE_OK;
}

/*
** Truncate an open file to a specified size
*/
static int winTruncate(sqlite3_file *id, sqlite3_int64 nByte){
  winFile *pFile = (winFile*)id;  /* File handle object */
  int rc = SQLITE_OK;             /* Return code for this function */
  DWORD lastErrno;

  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_TRUNCATE);
  OSTRACE(("TRUNCATE file=%p, size=%lld, lock=%d\n",
           pFile->h, nByte, pFile->locktype));

  /* If the user has configured a chunk-size for this file, truncate the
  ** file so that it consists of an integer number of chunks (i.e. the
  ** actual file size after the operation may be larger than the requested
  ** size).
  */
  if( pFile->szChunk>0 ){
................................................................................
  ** use read() and write() to access data beyond this point from now on.
  */
  if( pFile->pMapRegion && nByte<pFile->mmapSize ){
    pFile->mmapSize = nByte;
  }
#endif


  OSTRACE(("TRUNCATE file=%p, rc=%s\n", pFile->h, sqlite3ErrName(rc)));
  return rc;
}

#ifdef SQLITE_TEST
/*
** Count the number of fullsyncs and normal syncs.  This is used to test
** that syncs and fullsyncs are occuring at the right times.
................................................................................
  );

  /* Unix cannot, but some systems may return SQLITE_FULL from here. This
  ** line is to test that doing so does not cause any problems.
  */
  SimulateDiskfullError( return SQLITE_FULL );

  OSTRACE(("SYNC file=%p, flags=%x, lock=%d\n",

           pFile->h, flags, pFile->locktype));

#ifndef SQLITE_TEST
  UNUSED_PARAMETER(flags);
#else
  if( (flags&0x0F)==SQLITE_SYNC_FULL ){
    sqlite3_fullsync_count++;
  }
................................................................................
  sqlite3_sync_count++;
#endif

  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
  ** no-op
  */
#ifdef SQLITE_NO_SYNC
  OSTRACE(("SYNC-NOP file=%p, rc=SQLITE_OK\n", pFile->h));

  return SQLITE_OK;
#else
  rc = osFlushFileBuffers(pFile->h);
  SimulateIOError( rc=FALSE );
  if( rc ){
    OSTRACE(("SYNC file=%p, rc=SQLITE_OK\n", pFile->h));

    return SQLITE_OK;
  }else{
    pFile->lastErrno = osGetLastError();
    OSTRACE(("SYNC file=%p, rc=SQLITE_IOERR_FSYNC\n", pFile->h));

    return winLogError(SQLITE_IOERR_FSYNC, pFile->lastErrno,
                       "winSync", pFile->zPath);
  }
#endif
}

/*
................................................................................
                              dwFlagsAndAttributes,
                              NULL))==INVALID_HANDLE_VALUE &&
                              winRetryIoerr(&cnt, &lastErrno) ){
               /* Noop */
    }
  }
#endif
  winLogIoerr(cnt);

  OSTRACE(("OPEN file=%p, name=%s, access=%lx, rc=%s\n", h, zUtf8Name,
           dwDesiredAccess, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok"));

  if( h==INVALID_HANDLE_VALUE ){
    pFile->lastErrno = lastErrno;
    winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name);
................................................................................
      }
    } while(1);
  }
#endif
  if( rc && rc!=SQLITE_IOERR_DELETE_NOENT ){
    rc = winLogError(SQLITE_IOERR_DELETE, lastErrno, "winDelete", zFilename);
  }else{
    winLogIoerr(cnt);
  }
  sqlite3_free(zConverted);
  OSTRACE(("DELETE name=%s, rc=%s\n", zFilename, sqlite3ErrName(rc)));
  return rc;
}

/*
................................................................................
          && sAttrData.nFileSizeHigh==0
          && sAttrData.nFileSizeLow==0 ){
        attr = INVALID_FILE_ATTRIBUTES;
      }else{
        attr = sAttrData.dwFileAttributes;
      }
    }else{
      winLogIoerr(cnt);
      if( lastErrno!=ERROR_FILE_NOT_FOUND && lastErrno!=ERROR_PATH_NOT_FOUND ){
        sqlite3_free(zConverted);
        return winLogError(SQLITE_IOERR_ACCESS, lastErrno, "winAccess",
                           zFilename);
      }else{
        attr = INVALID_FILE_ATTRIBUTES;
      }

  }
  return 0;
}

/*
** Log a I/O error retry episode.
*/
static void winLogIoerr(int nRetry, int lineno){
  if( nRetry ){
    sqlite3_log(SQLITE_IOERR,
      "delayed %dms for lock/sharing conflict at line %d",
      winIoerrRetryDelay*nRetry*(nRetry+1)/2, lineno
    );
  }
}

#if SQLITE_OS_WINCE
/*************************************************************************
** This section contains code for WinCE only.
................................................................................
  winFile *pFile = (winFile*)id;

  assert( id!=0 );
#ifndef SQLITE_OMIT_WAL
  assert( pFile->pShm==0 );
#endif
  assert( pFile->h!=NULL && pFile->h!=INVALID_HANDLE_VALUE );
  OSTRACE(("CLOSE pid=%lu, pFile=%p, file=%p\n",
           osGetCurrentProcessId(), pFile, pFile->h));

#if SQLITE_MAX_MMAP_SIZE>0
  winUnmapfile(pFile);
#endif

  do{
    rc = osCloseHandle(pFile->h);
................................................................................
    sqlite3_free(pFile->zDeleteOnClose);
  }
#endif
  if( rc ){
    pFile->h = NULL;
  }
  OpenCounter(-1);
  OSTRACE(("CLOSE pid=%lu, pFile=%p, file=%p, rc=%s\n",
           osGetCurrentProcessId(), pFile, pFile->h, rc ? "ok" : "failed"));
  return rc ? SQLITE_OK
            : winLogError(SQLITE_IOERR_CLOSE, osGetLastError(),
                          "winClose", pFile->zPath);
}

/*
** Read data from a file into a buffer.  Return SQLITE_OK if all
................................................................................
  DWORD nRead;                    /* Number of bytes actually read from file */
  int nRetry = 0;                 /* Number of retrys */

  assert( id!=0 );
  assert( amt>0 );
  assert( offset>=0 );
  SimulateIOError(return SQLITE_IOERR_READ);
  OSTRACE(("READ pid=%lu, pFile=%p, file=%p, buffer=%p, amount=%d, "
           "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile,
           pFile->h, pBuf, amt, offset, pFile->locktype));

#if SQLITE_MAX_MMAP_SIZE>0
  /* Deal with as much of this read request as possible by transfering
  ** data from the memory mapping using memcpy().  */
  if( offset<pFile->mmapSize ){
    if( offset+amt <= pFile->mmapSize ){
      memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], amt);
      OSTRACE(("READ-MMAP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
               osGetCurrentProcessId(), pFile, pFile->h));
      return SQLITE_OK;
    }else{
      int nCopy = (int)(pFile->mmapSize - offset);
      memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], nCopy);
      pBuf = &((u8 *)pBuf)[nCopy];
      amt -= nCopy;
      offset += nCopy;
    }
  }
#endif

#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
  if( winSeekFile(pFile, offset) ){
    OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_FULL\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return SQLITE_FULL;
  }
  while( !osReadFile(pFile->h, pBuf, amt, &nRead, 0) ){
#else
  memset(&overlapped, 0, sizeof(OVERLAPPED));
  overlapped.Offset = (LONG)(offset & 0xffffffff);
  overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff);
  while( !osReadFile(pFile->h, pBuf, amt, &nRead, &overlapped) &&
         osGetLastError()!=ERROR_HANDLE_EOF ){
#endif
    DWORD lastErrno;
    if( winRetryIoerr(&nRetry, &lastErrno) ) continue;
    pFile->lastErrno = lastErrno;
    OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_READ\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return winLogError(SQLITE_IOERR_READ, pFile->lastErrno,
                       "winRead", pFile->zPath);
  }
  winLogIoerr(nRetry, __LINE__);
  if( nRead<(DWORD)amt ){
    /* Unread parts of the buffer must be zero-filled */
    memset(&((char*)pBuf)[nRead], 0, amt-nRead);
    OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_SHORT_READ\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return SQLITE_IOERR_SHORT_READ;
  }

  OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile, pFile->h));
  return SQLITE_OK;
}

/*
** Write data from a buffer into a file.  Return SQLITE_OK on success
** or some other error code on failure.
*/
................................................................................
  int nRetry = 0;                 /* Number of retries */

  assert( amt>0 );
  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_WRITE);
  SimulateDiskfullError(return SQLITE_FULL);

  OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, buffer=%p, amount=%d, "
           "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile,
           pFile->h, pBuf, amt, offset, pFile->locktype));

#if SQLITE_MAX_MMAP_SIZE>0
  /* Deal with as much of this write request as possible by transfering
  ** data from the memory mapping using memcpy().  */
  if( offset<pFile->mmapSize ){
    if( offset+amt <= pFile->mmapSize ){
      memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, amt);
      OSTRACE(("WRITE-MMAP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
               osGetCurrentProcessId(), pFile, pFile->h));
      return SQLITE_OK;
    }else{
      int nCopy = (int)(pFile->mmapSize - offset);
      memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, nCopy);
      pBuf = &((u8 *)pBuf)[nCopy];
      amt -= nCopy;
      offset += nCopy;
................................................................................
      rc = 1;
    }
  }

  if( rc ){
    if(   ( pFile->lastErrno==ERROR_HANDLE_DISK_FULL )
       || ( pFile->lastErrno==ERROR_DISK_FULL )){
      OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_FULL\n",
               osGetCurrentProcessId(), pFile, pFile->h));
      return winLogError(SQLITE_FULL, pFile->lastErrno,
                         "winWrite1", pFile->zPath);
    }
    OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_WRITE\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return winLogError(SQLITE_IOERR_WRITE, pFile->lastErrno,
                       "winWrite2", pFile->zPath);
  }else{
    winLogIoerr(nRetry, __LINE__);
  }
  OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile, pFile->h));
  return SQLITE_OK;
}

/*
** Truncate an open file to a specified size
*/
static int winTruncate(sqlite3_file *id, sqlite3_int64 nByte){
  winFile *pFile = (winFile*)id;  /* File handle object */
  int rc = SQLITE_OK;             /* Return code for this function */
  DWORD lastErrno;

  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_TRUNCATE);
  OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, size=%lld, lock=%d\n",
           osGetCurrentProcessId(), pFile, pFile->h, nByte, pFile->locktype));

  /* If the user has configured a chunk-size for this file, truncate the
  ** file so that it consists of an integer number of chunks (i.e. the
  ** actual file size after the operation may be larger than the requested
  ** size).
  */
  if( pFile->szChunk>0 ){
................................................................................
  ** use read() and write() to access data beyond this point from now on.
  */
  if( pFile->pMapRegion && nByte<pFile->mmapSize ){
    pFile->mmapSize = nByte;
  }
#endif

  OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, rc=%s\n",
           osGetCurrentProcessId(), pFile, pFile->h, sqlite3ErrName(rc)));
  return rc;
}

#ifdef SQLITE_TEST
/*
** Count the number of fullsyncs and normal syncs.  This is used to test
** that syncs and fullsyncs are occuring at the right times.
................................................................................
  );

  /* Unix cannot, but some systems may return SQLITE_FULL from here. This
  ** line is to test that doing so does not cause any problems.
  */
  SimulateDiskfullError( return SQLITE_FULL );

  OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, flags=%x, lock=%d\n",
           osGetCurrentProcessId(), pFile, pFile->h, flags,
           pFile->locktype));

#ifndef SQLITE_TEST
  UNUSED_PARAMETER(flags);
#else
  if( (flags&0x0F)==SQLITE_SYNC_FULL ){
    sqlite3_fullsync_count++;
  }
................................................................................
  sqlite3_sync_count++;
#endif

  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
  ** no-op
  */
#ifdef SQLITE_NO_SYNC
  OSTRACE(("SYNC-NOP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile, pFile->h));
  return SQLITE_OK;
#else
  rc = osFlushFileBuffers(pFile->h);
  SimulateIOError( rc=FALSE );
  if( rc ){
    OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return SQLITE_OK;
  }else{
    pFile->lastErrno = osGetLastError();
    OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_FSYNC\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return winLogError(SQLITE_IOERR_FSYNC, pFile->lastErrno,
                       "winSync", pFile->zPath);
  }
#endif
}

/*
................................................................................
                              dwFlagsAndAttributes,
                              NULL))==INVALID_HANDLE_VALUE &&
                              winRetryIoerr(&cnt, &lastErrno) ){
               /* Noop */
    }
  }
#endif
  winLogIoerr(cnt, __LINE__);

  OSTRACE(("OPEN file=%p, name=%s, access=%lx, rc=%s\n", h, zUtf8Name,
           dwDesiredAccess, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok"));

  if( h==INVALID_HANDLE_VALUE ){
    pFile->lastErrno = lastErrno;
    winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name);
................................................................................
      }
    } while(1);
  }
#endif
  if( rc && rc!=SQLITE_IOERR_DELETE_NOENT ){
    rc = winLogError(SQLITE_IOERR_DELETE, lastErrno, "winDelete", zFilename);
  }else{
    winLogIoerr(cnt, __LINE__);
  }
  sqlite3_free(zConverted);
  OSTRACE(("DELETE name=%s, rc=%s\n", zFilename, sqlite3ErrName(rc)));
  return rc;
}

/*
................................................................................
          && sAttrData.nFileSizeHigh==0
          && sAttrData.nFileSizeLow==0 ){
        attr = INVALID_FILE_ATTRIBUTES;
      }else{
        attr = sAttrData.dwFileAttributes;
      }
    }else{
      winLogIoerr(cnt, __LINE__);
      if( lastErrno!=ERROR_FILE_NOT_FOUND && lastErrno!=ERROR_PATH_NOT_FOUND ){
        sqlite3_free(zConverted);
        return winLogError(SQLITE_IOERR_ACCESS, lastErrno, "winAccess",
                           zFilename);
      }else{
        attr = INVALID_FILE_ATTRIBUTES;
      }

/*
** This routine works like printf in that its first argument is a
** format string and subsequent arguments are values to be substituted
** in place of % fields.  The result of formatting this string
** is written to iotrace.
*/
#ifdef SQLITE_ENABLE_IOTRACE
static void iotracePrintf(const char *zFormat, ...){
  va_list ap;
  char *z;
  if( iotrace==0 ) return;
  va_start(ap, zFormat);
  z = sqlite3_vmprintf(zFormat, ap);
  va_end(ap);
  fprintf(iotrace, "%s", z);
................................................................................
      fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n");
      rc = 1;
    }
  }else

#ifdef SQLITE_ENABLE_IOTRACE
  if( c=='i' && strncmp(azArg[0], "iotrace", n)==0 ){
    extern void (*sqlite3IoTrace)(const char*, ...);
    if( iotrace && iotrace!=stdout ) fclose(iotrace);
    iotrace = 0;
    if( nArg<2 ){
      sqlite3IoTrace = 0;
    }else if( strcmp(azArg[1], "-")==0 ){
      sqlite3IoTrace = iotracePrintf;
      iotrace = stdout;
................................................................................

        case SQLITE_TESTCTRL_IMPOSTER:
          if( nArg==5 ){
            rc = sqlite3_test_control(testctrl, p->db, 
                          azArg[2],
                          integerValue(azArg[3]),
                          integerValue(azArg[4]));
          }else{
            fprintf(stderr,"Usage: .testctrl initmode dbName onoff tnum\n");
            rc = 1;
          }
          break;

        case SQLITE_TESTCTRL_BITVEC_TEST:         
        case SQLITE_TESTCTRL_FAULT_INSTALL:       
        case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: 
        case SQLITE_TESTCTRL_SCRATCHMALLOC:       

/*
** This routine works like printf in that its first argument is a
** format string and subsequent arguments are values to be substituted
** in place of % fields.  The result of formatting this string
** is written to iotrace.
*/
#ifdef SQLITE_ENABLE_IOTRACE
static void SQLITE_CDECL iotracePrintf(const char *zFormat, ...){
  va_list ap;
  char *z;
  if( iotrace==0 ) return;
  va_start(ap, zFormat);
  z = sqlite3_vmprintf(zFormat, ap);
  va_end(ap);
  fprintf(iotrace, "%s", z);
................................................................................
      fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n");
      rc = 1;
    }
  }else

#ifdef SQLITE_ENABLE_IOTRACE
  if( c=='i' && strncmp(azArg[0], "iotrace", n)==0 ){
    SQLITE_API extern void (SQLITE_CDECL *sqlite3IoTrace)(const char*, ...);
    if( iotrace && iotrace!=stdout ) fclose(iotrace);
    iotrace = 0;
    if( nArg<2 ){
      sqlite3IoTrace = 0;
    }else if( strcmp(azArg[1], "-")==0 ){
      sqlite3IoTrace = iotracePrintf;
      iotrace = stdout;
................................................................................

        case SQLITE_TESTCTRL_IMPOSTER:
          if( nArg==5 ){
            rc = sqlite3_test_control(testctrl, p->db, 
                          azArg[2],
                          integerValue(azArg[3]),
                          integerValue(azArg[4]));
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          }else{
            fprintf(stderr,"Usage: .testctrl imposter dbName onoff tnum\n");
          }
          break;

        case SQLITE_TESTCTRL_BITVEC_TEST:         
        case SQLITE_TESTCTRL_FAULT_INSTALL:       
        case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: 
        case SQLITE_TESTCTRL_SCRATCHMALLOC:       

*/
#ifdef __cplusplus
extern "C" {
#endif


/*
** Add the ability to override 'extern'
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif

/*
** Add the ability to override 'cdecl'
*/
#ifndef SQLITE_CDECL
# define SQLITE_CDECL
#endif




/*
** These no-op macros are used in front of interfaces to mark those
** interfaces as either deprecated or experimental.  New applications
** should not use deprecated interfaces - they are supported for backwards
** compatibility only.  Application writers should be aware that
** experimental interfaces are subject to change in point releases.

*/
#ifdef __cplusplus
extern "C" {
#endif


/*
** Provide the ability to override linkage features of the interface.
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif
#ifndef SQLITE_API
# define SQLITE_API
#endif

#ifndef SQLITE_CDECL
# define SQLITE_CDECL
#endif
#ifndef SQLITE_STDCALL
# define SQLITE_STDCALL
#endif

/*
** These no-op macros are used in front of interfaces to mark those
** interfaces as either deprecated or experimental.  New applications
** should not use deprecated interfaces - they are supported for backwards
** compatibility only.  Application writers should be aware that
** experimental interfaces are subject to change in point releases.

** If the SQLITE_ENABLE IOTRACE exists then the global variable
** sqlite3IoTrace is a pointer to a printf-like routine used to
** print I/O tracing messages. 
*/
#ifdef SQLITE_ENABLE_IOTRACE
# define IOTRACE(A)  if( sqlite3IoTrace ){ sqlite3IoTrace A; }
  void sqlite3VdbeIOTraceSql(Vdbe*);
SQLITE_EXTERN void (*sqlite3IoTrace)(const char*,...);
#else
# define IOTRACE(A)
# define sqlite3VdbeIOTraceSql(X)
#endif

/*
** These routines are available for the mem2.c debugging memory allocator

** If the SQLITE_ENABLE IOTRACE exists then the global variable
** sqlite3IoTrace is a pointer to a printf-like routine used to
** print I/O tracing messages. 
*/
#ifdef SQLITE_ENABLE_IOTRACE
# define IOTRACE(A)  if( sqlite3IoTrace ){ sqlite3IoTrace A; }
  void sqlite3VdbeIOTraceSql(Vdbe*);
SQLITE_API SQLITE_EXTERN void (SQLITE_CDECL *sqlite3IoTrace)(const char*,...);
#else
# define IOTRACE(A)
# define sqlite3VdbeIOTraceSql(X)
#endif

/*
** These routines are available for the mem2.c debugging memory allocator

# 2015-03-25
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.
#
# The focus of this script is making multiple calls to saveCursorPosition()
# and restoreCursorPosition() when cursors have eState==CURSOR_SKIPNEXT
# 

set testdir [file dirname $argv0]
source $testdir/tester.tcl

load_static_extension db eval
do_execsql_test btree02-100 {
  CREATE TABLE t1(a TEXT, ax INTEGER, b INT, PRIMARY KEY(a,ax)) WITHOUT ROWID;
  WITH RECURSIVE c(i) AS (VALUES(1) UNION ALL SELECT i+1 FROM c WHERE i<10)
    INSERT INTO t1(a,ax,b) SELECT printf('%02x',i), random(), i FROM c;
  CREATE INDEX t1a ON t1(a);
  CREATE TABLE t2(x,y);
  CREATE TABLE t3(cnt);
  WITH RECURSIVE c(i) AS (VALUES(1) UNION ALL SELECT i+1 FROM c WHERE i<4)
    INSERT INTO t3(cnt) SELECT i FROM c;
  SELECT count(*) FROM t1;
} {10}
do_test btree02-110 {
  db eval BEGIN
  set i 0
  db eval {SELECT a, ax, b, cnt FROM t1 CROSS JOIN t3 WHERE b IS NOT NULL} {
    db eval {INSERT INTO t2(x,y) VALUES($b,$cnt)}
    # puts "a,b,cnt = ($a,$b,$cnt)"
    incr i
    if {$i%2==1} {
      set bx [expr {$b+1000}]
      # puts "INSERT ($a),$bx"
      db eval {INSERT INTO t1(a,ax,b) VALUES(printf('(%s)',$a),random(),$bx)}
    } else {
      # puts "DELETE a=$a"
      db eval {DELETE FROM t1 WHERE a=$a}
    }
    db eval {COMMIT; BEGIN}
  }  
  db one {COMMIT; SELECT count(*) FROM t1;}
} {20}

finish_test

# 2015-03-30
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# Corruption consisting of a database page that thinks it is a child
# of itself.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix corruptJ

if {[permutation]=="mmap"} {
  finish_test
  return
}

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec
database_may_be_corrupt

# Initialize the database.
#
do_execsql_test 1.1 {
  PRAGMA page_size=1024;
  PRAGMA auto_vacuum=0;
  CREATE TABLE t1(a,b);
  WITH RECURSIVE c(i) AS (VALUES(1) UNION ALL SELECT i+1 FROM c WHERE i<10)
    INSERT INTO t1(a,b) SELECT i, zeroblob(700) FROM c;
} {}
db close

# Corrupt the root page of the t1 table such that the left-child pointer
# for the very first cell points back to the root.  Then try to DROP the
# table.  The clearDatabasePage() routine should not loop.
#
do_test 1.2 {
  hexio_write test.db [expr {2*1024-2}] 02
  sqlite3 db test.db
  catchsql { DROP TABLE t1 }
} {1 {database disk image is malformed}}

# Similar test using a WITHOUT ROWID table
#
do_test 2.1 {
  db close
  forcedelete test.db
  sqlite3 db test.db
  db eval {
    PRAGMA page_size=1024;
    PRAGMA auto_vacuum=0;
    CREATE TABLE t1(a,b,PRIMARY KEY(a,b)) WITHOUT ROWID;
    WITH RECURSIVE c(i) AS (VALUES(1) UNION ALL SELECT i+1 FROM c WHERE i<100)
      INSERT INTO t1(a,b) SELECT i, zeroblob(200) FROM c;
  }
} {}

# The table is three levels deep.  Corrupt the left child of an intermediate
# page so that it points back to the root page.
#
do_test 2.2 {
  db close
  hexio_read test.db [expr {9*1024+391}] 8
} {00000008814D0401}
do_test 2.2b {
  hexio_write test.db [expr {9*1024+391}] 00000002
  sqlite3 db test.db
  catchsql { DROP TABLE t1 }
} {0 {}}

finish_test

    lappend win32_lock_ok $::delay1
    do_test win32lock-1.2-$delay1-ok {
       set ::msg
    } {1 100000 2 50000 3 25000 4 12500}
    if {[info exists ::log] && $::log!=""} {
      do_test win32lock-1.2-$delay1-log1 {
        regsub {\d+} $::log # x

        set x
      } {{delayed #ms for lock/sharing conflict}}
    }
  }
  if {[llength $win32_lock_ok] && [llength $win32_lock_error]} break
  incr delay1 25
  if {$delay1 > 12500} {
................................................................................
    lappend win32_lock_ok $::delay1
    do_test win32lock-2.2-$delay1-ok {
       set ::msg
    } {1 100000 2 50000 3 25000 4 12500}
    if {[info exists ::log] && $::log!=""} {
      do_test win32lock-2.2-$delay1-log1 {
        regsub {\d+} $::log # x

        set x
      } {{delayed #ms for lock/sharing conflict}}
    }
  }
  if {[llength $win32_lock_ok] && [llength $win32_lock_error]} break
  incr delay1 1
  if {$delay1 > 500} {

    lappend win32_lock_ok $::delay1
    do_test win32lock-1.2-$delay1-ok {
       set ::msg
    } {1 100000 2 50000 3 25000 4 12500}
    if {[info exists ::log] && $::log!=""} {
      do_test win32lock-1.2-$delay1-log1 {
        regsub {\d+} $::log # x
        regsub { at line \d+} $x "" x
        set x
      } {{delayed #ms for lock/sharing conflict}}
    }
  }
  if {[llength $win32_lock_ok] && [llength $win32_lock_error]} break
  incr delay1 25
  if {$delay1 > 12500} {
................................................................................
    lappend win32_lock_ok $::delay1
    do_test win32lock-2.2-$delay1-ok {
       set ::msg
    } {1 100000 2 50000 3 25000 4 12500}
    if {[info exists ::log] && $::log!=""} {
      do_test win32lock-2.2-$delay1-log1 {
        regsub {\d+} $::log # x
        regsub { at line \d+} $x "" x
        set x
      } {{delayed #ms for lock/sharing conflict}}
    }
  }
  if {[llength $win32_lock_ok] && [llength $win32_lock_error]} break
  incr delay1 1
  if {$delay1 > 500} {

# For example, the "parse.c" and "parse.h" files to implement the
# the parser are derived from "parse.y" using lemon.  And the 
# "keywordhash.h" files is generated by a program named "mkkeywordhash".
#
# After the "tsrc" directory has been created and populated, run
# this script:
#
#      tclsh mksqlite3c.tcl
#
# The amalgamated SQLite code will be written into sqlite3.c
#

# Begin by reading the "sqlite3.h" header file.  Extract the version number
# from in this file.  The versioon number is needed to generate the header
# comment of the amalgamation.
#
if {[lsearch $argv --nostatic]>=0} {
  set addstatic 0
} else {
  set addstatic 1
}
................................................................................
*/
#define SQLITE_CORE 1
#define SQLITE_AMALGAMATION 1}]
if {$addstatic} {
  puts $out \
{#ifndef SQLITE_PRIVATE
# define SQLITE_PRIVATE static
#endif
#ifndef SQLITE_API
# define SQLITE_API
#endif}
}

# These are the header files used by SQLite.  The first time any of these 
# files are seen in a #include statement in the C code, include the complete
# text of the file in-line.  The file only needs to be included once.
#
................................................................................
   os_common.h
   os_setup.h
   os_win.h
   os.h
   pager.h
   parse.h
   pcache.h

   sqlite3ext.h
   sqlite3.h
   sqliteicu.h
   sqliteInt.h
   sqliteLimit.h
   vdbe.h
   vdbeInt.h

   wal.h

} {
  set available_hdr($hdr) 1
}
set available_hdr(sqliteInt.h) 0


















# 78 stars used for comment formatting.
set s78 \
{*****************************************************************************}

# Insert a comment into the code
#
................................................................................
  set nstar [expr {60 - $n}]
  set stars [string range $s78 0 $nstar]
  puts $out "/************** $text $stars/"
}

# Read the source file named $filename and write it into the
# sqlite3.c output file.  If any #include statements are seen,
# process them approprately.
#
proc copy_file {filename} {
  global seen_hdr available_hdr out addstatic linemacros
  set ln 0
  set tail [file tail $filename]
  section_comment "Begin file $tail"
  if {$linemacros} {puts $out "#line 1 \"$filename\""}
  set in [open $filename r]
  set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+(sqlite3[_a-zA-Z0-9]+)(\[|;| =)}
  set declpattern {[a-zA-Z][a-zA-Z_0-9 ]+ \**(sqlite3[_a-zA-Z0-9]+)\(}
  if {[file extension $filename]==".h"} {
    set declpattern " *$declpattern"
  }
  set declpattern ^$declpattern
  while {![eof $in]} {
    set line [gets $in]
    incr ln
    if {[regexp {^\s*#\s*include\s+["<]([^">]+)[">]} $line all hdr]} {
      if {[info exists available_hdr($hdr)]} {
        if {$available_hdr($hdr)} {
          if {$hdr!="os_common.h" && $hdr!="hwtime.h"} {
................................................................................
          }
          section_comment "Include $hdr in the middle of $tail"
          copy_file tsrc/$hdr
          section_comment "Continuing where we left off in $tail"
          if {$linemacros} {puts $out "#line [expr {$ln+1}] \"$filename\""}
        }
      } elseif {![info exists seen_hdr($hdr)]} {

        set seen_hdr($hdr) 1

        puts $out $line




      } else {
        puts $out "/* $line */"



      }
    } elseif {[regexp {^#ifdef __cplusplus} $line]} {
      puts $out "#if 0"
    } elseif {!$linemacros && [regexp {^#line} $line]} {
      # Skip #line directives.
    } elseif {$addstatic && ![regexp {^(static|typedef)} $line]} {




      regsub {^SQLITE_API } $line {} line
      if {[regexp $declpattern $line all funcname]} {
        # Add the SQLITE_PRIVATE or SQLITE_API keyword before functions.
        # so that linkage can be modified at compile-time.
        if {[regexp {^sqlite3_} $funcname]} {











          puts $out "SQLITE_API $line"
        } else {
          puts $out "SQLITE_PRIVATE $line"
        }
      } elseif {[regexp $varpattern $line all varname]} {
        # Add the SQLITE_PRIVATE before variable declarations or
        # definitions for internal use

        if {![regexp {^sqlite3_} $varname]} {
          regsub {^extern } $line {} line
          puts $out "SQLITE_PRIVATE $line"
        } else {
          if {[regexp {const char sqlite3_version\[\];} $line]} {
            set line {const char sqlite3_version[] = SQLITE_VERSION;}
          }
          regsub {^SQLITE_EXTERN } $line {} line
          puts $out "SQLITE_API $line"
        }
      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {

        regsub {^SQLITE_EXTERN } $line {} line
        puts $out "SQLITE_PRIVATE $line"
      } elseif {[regexp {^void \(\*sqlite3Os} $line]} {

        puts $out "SQLITE_PRIVATE $line"
      } else {
        puts $out $line
      }
    } else {
      puts $out $line
    }

# For example, the "parse.c" and "parse.h" files to implement the
# the parser are derived from "parse.y" using lemon.  And the 
# "keywordhash.h" files is generated by a program named "mkkeywordhash".
#
# After the "tsrc" directory has been created and populated, run
# this script:
#
#      tclsh mksqlite3c-noext.tcl
#
# The amalgamated SQLite code will be written into sqlite3.c
#

# Begin by reading the "sqlite3.h" header file.  Extract the version number
# from in this file.  The version number is needed to generate the header
# comment of the amalgamation.
#
if {[lsearch $argv --nostatic]>=0} {
  set addstatic 0
} else {
  set addstatic 1
}
................................................................................
*/
#define SQLITE_CORE 1
#define SQLITE_AMALGAMATION 1}]
if {$addstatic} {
  puts $out \
{#ifndef SQLITE_PRIVATE
# define SQLITE_PRIVATE static



#endif}
}

# These are the header files used by SQLite.  The first time any of these 
# files are seen in a #include statement in the C code, include the complete
# text of the file in-line.  The file only needs to be included once.
#
................................................................................
   os_common.h
   os_setup.h
   os_win.h
   os.h
   pager.h
   parse.h
   pcache.h
   pragma.h
   sqlite3ext.h
   sqlite3.h
   sqliteicu.h
   sqliteInt.h
   sqliteLimit.h
   vdbe.h
   vdbeInt.h
   vxworks.h
   wal.h
   whereInt.h
} {
  set available_hdr($hdr) 1
}
set available_hdr(sqliteInt.h) 0

# These headers should be copied into the amalgamation without modifying any
# of their function declarations or definitions.
set varonly_hdr(sqlite3.h) 1

# These are the functions that accept a variable number of arguments.  They
# always need to use the "cdecl" calling convention even when another calling
# convention (e.g. "stcall") is being used for the rest of the library.
set cdecllist {
  sqlite3_config
  sqlite3_db_config
  sqlite3_log
  sqlite3_mprintf
  sqlite3_snprintf
  sqlite3_test_control
  sqlite3_vtab_config
}

# 78 stars used for comment formatting.
set s78 \
{*****************************************************************************}

# Insert a comment into the code
#
................................................................................
  set nstar [expr {60 - $n}]
  set stars [string range $s78 0 $nstar]
  puts $out "/************** $text $stars/"
}

# Read the source file named $filename and write it into the
# sqlite3.c output file.  If any #include statements are seen,
# process them appropriately.
#
proc copy_file {filename} {
  global seen_hdr available_hdr varonly_hdr cdecllist out addstatic linemacros
  set ln 0
  set tail [file tail $filename]
  section_comment "Begin file $tail"
  if {$linemacros} {puts $out "#line 1 \"$filename\""}
  set in [open $filename r]
  set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+(sqlite3[_a-zA-Z0-9]+)(\[|;| =)}
  set declpattern {([a-zA-Z][a-zA-Z_0-9 ]+ \**)(sqlite3[_a-zA-Z0-9]+)(\(.*)}
  if {[file extension $filename]==".h"} {
    set declpattern " *$declpattern"
  }
  set declpattern ^$declpattern\$
  while {![eof $in]} {
    set line [gets $in]
    incr ln
    if {[regexp {^\s*#\s*include\s+["<]([^">]+)[">]} $line all hdr]} {
      if {[info exists available_hdr($hdr)]} {
        if {$available_hdr($hdr)} {
          if {$hdr!="os_common.h" && $hdr!="hwtime.h"} {
................................................................................
          }
          section_comment "Include $hdr in the middle of $tail"
          copy_file tsrc/$hdr
          section_comment "Continuing where we left off in $tail"
          if {$linemacros} {puts $out "#line [expr {$ln+1}] \"$filename\""}
        }
      } elseif {![info exists seen_hdr($hdr)]} {
        if {![regexp {/\*\s+amalgamator:\s+dontcache\s+\*/} $line]} {
          set seen_hdr($hdr) 1
        }
        puts $out $line
      } elseif {[regexp {/\*\s+amalgamator:\s+keep\s+\*/} $line]} {
        # This include file must be kept because there was a "keep"
        # directive inside of a line comment.
        puts $out $line
      } else {

        # Comment out the entire line, replacing any nested comment
        # begin/end markers with the harmless substring "**".
        puts $out "/* [string map [list /* ** */ **] $line] */"
      }
    } elseif {[regexp {^#ifdef __cplusplus} $line]} {
      puts $out "#if 0"
    } elseif {!$linemacros && [regexp {^#line} $line]} {
      # Skip #line directives.
    } elseif {$addstatic && ![regexp {^(static|typedef)} $line]} {
      # Skip adding the SQLITE_PRIVATE or SQLITE_API keyword before
      # functions if this header file does not need it.
      if {![info exists varonly_hdr($tail)]
       && [regexp $declpattern $line all rettype funcname rest]} {
        regsub {^SQLITE_API } $line {} line

        # Add the SQLITE_PRIVATE or SQLITE_API keyword before functions.
        # so that linkage can be modified at compile-time.
        if {[regexp {^sqlite3_} $funcname]} {
          set line SQLITE_API
          append line " " [string trim $rettype]
          if {[string index $rettype end] ne "*"} {
            append line " "
          }
          if {[lsearch -exact $cdecllist $funcname] >= 0} {
            append line SQLITE_CDECL
          } else {
            append line SQLITE_STDCALL
          }
          append line " " $funcname $rest
          puts $out $line
        } else {
          puts $out "SQLITE_PRIVATE $line"
        }
      } elseif {[regexp $varpattern $line all varname]} {
          # Add the SQLITE_PRIVATE before variable declarations or
          # definitions for internal use
          regsub {^SQLITE_API } $line {} line
          if {![regexp {^sqlite3_} $varname]} {
            regsub {^extern } $line {} line
            puts $out "SQLITE_PRIVATE $line"
          } else {
            if {[regexp {const char sqlite3_version\[\];} $line]} {
              set line {const char sqlite3_version[] = SQLITE_VERSION;}
            }
            regsub {^SQLITE_EXTERN } $line {} line
            puts $out "SQLITE_API $line"
          }
      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {
        regsub {^SQLITE_API } $line {} line
        regsub {^SQLITE_EXTERN } $line {} line
        puts $out $line
      } elseif {[regexp {^void \(\*sqlite3Os} $line]} {
        regsub {^SQLITE_API } $line {} line
        puts $out "SQLITE_PRIVATE $line"
      } else {
        puts $out $line
      }
    } else {
      puts $out $line
    }

*/
#define SQLITE_CORE 1
#define SQLITE_AMALGAMATION 1}]
if {$addstatic} {
  puts $out \
{#ifndef SQLITE_PRIVATE
# define SQLITE_PRIVATE static
#endif
#ifndef SQLITE_API
# define SQLITE_API
#endif}
}

# These are the header files used by SQLite.  The first time any of these 
# files are seen in a #include statement in the C code, include the complete
# text of the file in-line.  The file only needs to be included once.
#
................................................................................
   wal.h
   whereInt.h
} {
  set available_hdr($hdr) 1
}
set available_hdr(sqliteInt.h) 0
set available_hdr(sqlite3session.h) 0


















# 78 stars used for comment formatting.
set s78 \
{*****************************************************************************}

# Insert a comment into the code
#
................................................................................
}

# Read the source file named $filename and write it into the
# sqlite3.c output file.  If any #include statements are seen,
# process them appropriately.
#
proc copy_file {filename} {
  global seen_hdr available_hdr out addstatic linemacros
  set ln 0
  set tail [file tail $filename]
  section_comment "Begin file $tail"
  if {$linemacros} {puts $out "#line 1 \"$filename\""}
  set in [open $filename r]
  set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+(sqlite3[_a-zA-Z0-9]+)(\[|;| =)}
  set declpattern {[a-zA-Z][a-zA-Z_0-9 ]+ \**(sqlite3[_a-zA-Z0-9]+)\(}
  if {[file extension $filename]==".h"} {
    set declpattern " *$declpattern"
  }
  set declpattern ^$declpattern
  while {![eof $in]} {
    set line [gets $in]
    incr ln
    if {[regexp {^\s*#\s*include\s+["<]([^">]+)[">]} $line all hdr]} {
      if {[info exists available_hdr($hdr)]} {
        if {$available_hdr($hdr)} {
          if {$hdr!="os_common.h" && $hdr!="hwtime.h"} {
................................................................................
        puts $out "/* [string map [list /* ** */ **] $line] */"
      }
    } elseif {[regexp {^#ifdef __cplusplus} $line]} {
      puts $out "#if 0"
    } elseif {!$linemacros && [regexp {^#line} $line]} {
      # Skip #line directives.
    } elseif {$addstatic && ![regexp {^(static|typedef)} $line]} {




      regsub {^SQLITE_API } $line {} line
      if {[regexp $declpattern $line all funcname]} {
        # Add the SQLITE_PRIVATE or SQLITE_API keyword before functions.
        # so that linkage can be modified at compile-time.
        if {[regexp {^sqlite3[a-z]*_} $funcname]} {











          puts $out "SQLITE_API $line"
        } else {
          puts $out "SQLITE_PRIVATE $line"
        }
      } elseif {[regexp $varpattern $line all varname]} {
        # Add the SQLITE_PRIVATE before variable declarations or
        # definitions for internal use

        if {![regexp {^sqlite3_} $varname]} {
          regsub {^extern } $line {} line
          puts $out "SQLITE_PRIVATE $line"
        } else {
          if {[regexp {const char sqlite3_version\[\];} $line]} {
            set line {const char sqlite3_version[] = SQLITE_VERSION;}
          }
          regsub {^SQLITE_EXTERN } $line {} line
          puts $out "SQLITE_API $line"
        }
      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {

        regsub {^SQLITE_EXTERN } $line {} line
        puts $out $line
      } elseif {[regexp {^void \(\*sqlite3Os} $line]} {

        puts $out "SQLITE_PRIVATE $line"
      } else {
        puts $out $line
      }
    } else {
      puts $out $line
    }

*/
#define SQLITE_CORE 1
#define SQLITE_AMALGAMATION 1}]
if {$addstatic} {
  puts $out \
{#ifndef SQLITE_PRIVATE
# define SQLITE_PRIVATE static



#endif}
}

# These are the header files used by SQLite.  The first time any of these 
# files are seen in a #include statement in the C code, include the complete
# text of the file in-line.  The file only needs to be included once.
#
................................................................................
   wal.h
   whereInt.h
} {
  set available_hdr($hdr) 1
}
set available_hdr(sqliteInt.h) 0
set available_hdr(sqlite3session.h) 0

# These headers should be copied into the amalgamation without modifying any
# of their function declarations or definitions.
set varonly_hdr(sqlite3.h) 1

# These are the functions that accept a variable number of arguments.  They
# always need to use the "cdecl" calling convention even when another calling
# convention (e.g. "stcall") is being used for the rest of the library.
set cdecllist {
  sqlite3_config
  sqlite3_db_config
  sqlite3_log
  sqlite3_mprintf
  sqlite3_snprintf
  sqlite3_test_control
  sqlite3_vtab_config
}

# 78 stars used for comment formatting.
set s78 \
{*****************************************************************************}

# Insert a comment into the code
#
................................................................................
}

# Read the source file named $filename and write it into the
# sqlite3.c output file.  If any #include statements are seen,
# process them appropriately.
#
proc copy_file {filename} {
  global seen_hdr available_hdr varonly_hdr cdecllist out addstatic linemacros
  set ln 0
  set tail [file tail $filename]
  section_comment "Begin file $tail"
  if {$linemacros} {puts $out "#line 1 \"$filename\""}
  set in [open $filename r]
  set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+(sqlite3[_a-zA-Z0-9]+)(\[|;| =)}
  set declpattern {([a-zA-Z][a-zA-Z_0-9 ]+ \**)(sqlite3[_a-zA-Z0-9]+)(\(.*)}
  if {[file extension $filename]==".h"} {
    set declpattern " *$declpattern"
  }
  set declpattern ^$declpattern\$
  while {![eof $in]} {
    set line [gets $in]
    incr ln
    if {[regexp {^\s*#\s*include\s+["<]([^">]+)[">]} $line all hdr]} {
      if {[info exists available_hdr($hdr)]} {
        if {$available_hdr($hdr)} {
          if {$hdr!="os_common.h" && $hdr!="hwtime.h"} {
................................................................................
        puts $out "/* [string map [list /* ** */ **] $line] */"
      }
    } elseif {[regexp {^#ifdef __cplusplus} $line]} {
      puts $out "#if 0"
    } elseif {!$linemacros && [regexp {^#line} $line]} {
      # Skip #line directives.
    } elseif {$addstatic && ![regexp {^(static|typedef)} $line]} {
      # Skip adding the SQLITE_PRIVATE or SQLITE_API keyword before
      # functions if this header file does not need it.
      if {![info exists varonly_hdr($tail)]
       && [regexp $declpattern $line all rettype funcname rest]} {
        regsub {^SQLITE_API } $line {} line

        # Add the SQLITE_PRIVATE or SQLITE_API keyword before functions.
        # so that linkage can be modified at compile-time.
        if {[regexp {^sqlite3[a-z]*_} $funcname]} {
          set line SQLITE_API
          append line " " [string trim $rettype]
          if {[string index $rettype end] ne "*"} {
            append line " "
          }
          if {[lsearch -exact $cdecllist $funcname] >= 0} {
            append line SQLITE_CDECL
          } else {
            append line SQLITE_STDCALL
          }
          append line " " $funcname $rest
          puts $out $line
        } else {
          puts $out "SQLITE_PRIVATE $line"
        }
      } elseif {[regexp $varpattern $line all varname]} {
          # Add the SQLITE_PRIVATE before variable declarations or
          # definitions for internal use
          regsub {^SQLITE_API } $line {} line
          if {![regexp {^sqlite3_} $varname]} {
            regsub {^extern } $line {} line
            puts $out "SQLITE_PRIVATE $line"
          } else {
            if {[regexp {const char sqlite3_version\[\];} $line]} {
              set line {const char sqlite3_version[] = SQLITE_VERSION;}
            }
            regsub {^SQLITE_EXTERN } $line {} line
            puts $out "SQLITE_API $line"
          }
      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {
        regsub {^SQLITE_API } $line {} line
        regsub {^SQLITE_EXTERN } $line {} line
        puts $out $line
      } elseif {[regexp {^void \(\*sqlite3Os} $line]} {
        regsub {^SQLITE_API } $line {} line
        puts $out "SQLITE_PRIVATE $line"
      } else {
        puts $out $line
      }
    } else {
      puts $out $line
    }

  }
}
close $in

# Set up patterns for recognizing API declarations.
#
set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+sqlite3_[_a-zA-Z0-9]+(\[|;| =)}
set declpattern {^ *[a-zA-Z][a-zA-Z_0-9 ]+ \**sqlite3_[_a-zA-Z0-9]+\(}

# Force the output to use unix line endings, even on Windows.
fconfigure stdout -translation lf

set filelist [subst {
  $TOP/src/sqlite.h.in
  $TOP/ext/rtree/sqlite3rtree.h
  $TOP/ext/session/sqlite3session.h
}]














# Process the source files.
#
foreach file $filelist {
  set in [open $file]
  if {![regexp {sqlite\.h\.in} $file]} {
    puts "/******** Begin file [file tail $file] *********/"
................................................................................
    # line when copying sqlite3rtree.h into sqlite3.h.
    #
    if {[string match {*#include*<sqlite3.h>*} $line]} continue
  
    regsub -- --VERS--           $line $zVersion line
    regsub -- --VERSION-NUMBER-- $line $nVersion line
    regsub -- --SOURCE-ID--      $line "$zDate $zUuid" line
  
    if {[regexp {define SQLITE_EXTERN extern} $line]} {
      puts $line
      puts [gets $in]
      puts ""
      puts "#ifndef SQLITE_API"
      puts "# define SQLITE_API"
      puts "#endif"
      set line ""
    }
  
    if {([regexp $varpattern $line] && ![regexp {^ *typedef} $line])
     || ([regexp $declpattern $line])
    } {
      set line "SQLITE_API $line"


    }
    puts $line
  }
  close $in
  if {![regexp {sqlite\.h\.in} $file]} {
    puts "/******** End of [file tail $file] *********/"
  }
}

  }
}
close $in

# Set up patterns for recognizing API declarations.
#
set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+sqlite3_[_a-zA-Z0-9]+(\[|;| =)}
set declpattern {^ *([a-zA-Z][a-zA-Z_0-9 ]+ \**)(sqlite3_[_a-zA-Z0-9]+)(\(.*)$}

# Force the output to use unix line endings, even on Windows.
fconfigure stdout -translation lf

set filelist [subst {
  $TOP/src/sqlite.h.in
  $TOP/ext/rtree/sqlite3rtree.h
  $TOP/ext/session/sqlite3session.h
}]

# These are the functions that accept a variable number of arguments.  They
# always need to use the "cdecl" calling convention even when another calling
# convention (e.g. "stcall") is being used for the rest of the library.
set cdecllist {
  sqlite3_config
  sqlite3_db_config
  sqlite3_log
  sqlite3_mprintf
  sqlite3_snprintf
  sqlite3_test_control
  sqlite3_vtab_config
}

# Process the source files.
#
foreach file $filelist {
  set in [open $file]
  if {![regexp {sqlite\.h\.in} $file]} {
    puts "/******** Begin file [file tail $file] *********/"
................................................................................
    # line when copying sqlite3rtree.h into sqlite3.h.
    #
    if {[string match {*#include*<sqlite3.h>*} $line]} continue
  
    regsub -- --VERS--           $line $zVersion line
    regsub -- --VERSION-NUMBER-- $line $nVersion line
    regsub -- --SOURCE-ID--      $line "$zDate $zUuid" line

    if {[regexp $varpattern $line] && ![regexp {^ *typedef} $line]} {
      set line "SQLITE_API $line"
    } else {
      if {[regexp $declpattern $line all rettype funcname rest]} {
        set line SQLITE_API
        append line " " [string trim $rettype]
        if {[string index $rettype end] ne "*"} {
          append line " "
        }
        if {[lsearch -exact $cdecllist $funcname] >= 0} {
          append line SQLITE_CDECL
        } else {
          append line SQLITE_STDCALL
        }
        append line " " $funcname $rest
      }
    }
    puts $line
  }
  close $in
  if {![regexp {sqlite\.h\.in} $file]} {
    puts "/******** End of [file tail $file] *********/"
  }
}