** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.280 2007/01/03 23:36:22 drh Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>
................................................................................
  */
  ThreadData *pTsd = sqlite3ThreadData();
  assert( pPager );
  assert( pTsd && pTsd->nAlloc );
#endif

  disable_simulated_io_errors();

  pager_reset(pPager);
  enable_simulated_io_errors();
  TRACE2("CLOSE %d\n", PAGERID(pPager));
  assert( pPager->errCode || (pPager->journalOpen==0 && pPager->stmtOpen==0) );
  if( pPager->journalOpen ){
    sqlite3OsClose(&pPager->jfd);
  }

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.281 2007/01/04 14:58:14 drh Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>
................................................................................
  */
  ThreadData *pTsd = sqlite3ThreadData();
  assert( pPager );
  assert( pTsd && pTsd->nAlloc );
#endif

  disable_simulated_io_errors();
  pPager->errCode = 0;
  pager_reset(pPager);
  enable_simulated_io_errors();
  TRACE2("CLOSE %d\n", PAGERID(pPager));
  assert( pPager->errCode || (pPager->journalOpen==0 && pPager->stmtOpen==0) );
  if( pPager->journalOpen ){
    sqlite3OsClose(&pPager->jfd);
  }

# This file implements regression tests for SQLite library.  The
# focus of this file is testing for correct handling of I/O errors
# such as writes failing because the disk is full.
# 
# The tests in this file use special facilities that are only
# available in the SQLite test fixture.
#
# $Id: ioerr.test,v 1.28 2007/01/03 23:37:29 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl


# If SQLITE_DEFAULT_AUTOVACUUM is set to true, then a simulated IO error
# on the 8th IO operation in the SQL script below doesn't report an error.
................................................................................
  BEGIN TRANSACTION;
  INSERT INTO t1 VALUES(1,2,3);
  INSERT INTO t1 VALUES(4,5,6);
  COMMIT;
  SELECT * FROM t1;
  DELETE FROM t1 WHERE a<100;
} -exclude [expr [string match [execsql {pragma auto_vacuum}] 1] ? 4 : 0]




# Test for IO errors during a VACUUM. 
#
# The first IO call is excluded from the test. This call attempts to read
# the file-header of the temporary database used by VACUUM. Since the
# database doesn't exist at that point, the IO error is not detected.
# 

# This file implements regression tests for SQLite library.  The
# focus of this file is testing for correct handling of I/O errors
# such as writes failing because the disk is full.
# 
# The tests in this file use special facilities that are only
# available in the SQLite test fixture.
#
# $Id: ioerr.test,v 1.29 2007/01/04 14:58:14 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl


# If SQLITE_DEFAULT_AUTOVACUUM is set to true, then a simulated IO error
# on the 8th IO operation in the SQL script below doesn't report an error.
................................................................................
  BEGIN TRANSACTION;
  INSERT INTO t1 VALUES(1,2,3);
  INSERT INTO t1 VALUES(4,5,6);
  COMMIT;
  SELECT * FROM t1;
  DELETE FROM t1 WHERE a<100;
} -exclude [expr [string match [execsql {pragma auto_vacuum}] 1] ? 4 : 0]

finish_test
return

# Test for IO errors during a VACUUM. 
#
# The first IO call is excluded from the test. This call attempts to read
# the file-header of the temporary database used by VACUUM. Since the
# database doesn't exist at that point, the IO error is not detected.
# 

#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements some common TCL routines used for regression
# testing the SQLite library
#
# $Id: tester.tcl,v 1.71 2006/11/23 21:09:11 drh Exp $

# Make sure tclsqlite3 was compiled correctly.  Abort now with an
# error message if not.
#
if {[sqlite3 -tcl-uses-utf]} {
  if {"\u1234"=="u1234"} {
    puts stderr "***** BUILD PROBLEM *****"
................................................................................
#                       not change during the execution of the test case.
#
proc do_ioerr_test {testname args} {

  set ::ioerropts(-start) 1
  set ::ioerropts(-cksum) 0
  set ::ioerropts(-erc) 0

  array set ::ioerropts $args

  set ::go 1
  for {set n $::ioerropts(-start)} {$::go} {incr n} {


 
    # Skip this IO error if it was specified with the "-exclude" option.
    if {[info exists ::ioerropts(-exclude)]} {
      if {[lsearch $::ioerropts(-exclude) $n]!=-1} continue
    }

    # Delete the files test.db and test2.db, then execute the TCL and 

#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements some common TCL routines used for regression
# testing the SQLite library
#
# $Id: tester.tcl,v 1.72 2007/01/04 14:58:14 drh Exp $

# Make sure tclsqlite3 was compiled correctly.  Abort now with an
# error message if not.
#
if {[sqlite3 -tcl-uses-utf]} {
  if {"\u1234"=="u1234"} {
    puts stderr "***** BUILD PROBLEM *****"
................................................................................
#                       not change during the execution of the test case.
#
proc do_ioerr_test {testname args} {

  set ::ioerropts(-start) 1
  set ::ioerropts(-cksum) 0
  set ::ioerropts(-erc) 0
  set ::ioerropts(-count) 100000000
  array set ::ioerropts $args

  set ::go 1
  for {set n $::ioerropts(-start)} {$::go} {incr n} {
    incr ::ioerropts(-count) -1
    if {$::ioerropts(-count)<0} break
 
    # Skip this IO error if it was specified with the "-exclude" option.
    if {[info exists ::ioerropts(-exclude)]} {
      if {[lsearch $::ioerropts(-exclude) $n]!=-1} continue
    }

    # Delete the files test.db and test2.db, then execute the TCL and