** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.303 2007/03/27 17:37:32 danielk1977 Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>
................................................................................
  }
  rc = sqlite3OsOpenExclusive(pPager->zJournal, &pPager->jfd,
                                 pPager->tempFile);
  pPager->journalOff = 0;
  pPager->setMaster = 0;
  pPager->journalHdr = 0;
  if( rc!=SQLITE_OK ){



    goto failed_to_open_journal;
  }
  sqlite3OsSetFullSync(pPager->jfd, pPager->full_fsync);
  sqlite3OsSetFullSync(pPager->fd, pPager->full_fsync);
  sqlite3OsOpenDirectory(pPager->jfd, pPager->zDirectory);
  pPager->journalOpen = 1;
  pPager->journalStarted = 0;
................................................................................
    }
  }
  return rc;

failed_to_open_journal:
  sqliteFree(pPager->aInJournal);
  pPager->aInJournal = 0;

  if( rc==SQLITE_NOMEM ){
    /* If this was a malloc() failure, then we will not be closing the pager
    ** file. So delete any journal file we may have just created. Otherwise,
    ** the system will get confused, we have a read-lock on the file and a
    ** mysterious journal has appeared in the filesystem.
    */
    /* sqlite3OsDelete(pPager->zJournal); */
  }else{


    pager_reset(pPager);
  }

  return rc;
}

/*
** Acquire a write-lock on the database.  The lock is removed when
** the any of the following happen:
**

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.304 2007/03/28 01:59:34 drh Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>
................................................................................
  }
  rc = sqlite3OsOpenExclusive(pPager->zJournal, &pPager->jfd,
                                 pPager->tempFile);
  pPager->journalOff = 0;
  pPager->setMaster = 0;
  pPager->journalHdr = 0;
  if( rc!=SQLITE_OK ){
    if( rc==SQLITE_NOMEM ){
      sqlite3OsDelete(pPager->zJournal);
    }
    goto failed_to_open_journal;
  }
  sqlite3OsSetFullSync(pPager->jfd, pPager->full_fsync);
  sqlite3OsSetFullSync(pPager->fd, pPager->full_fsync);
  sqlite3OsOpenDirectory(pPager->jfd, pPager->zDirectory);
  pPager->journalOpen = 1;
  pPager->journalStarted = 0;
................................................................................
    }
  }
  return rc;

failed_to_open_journal:
  sqliteFree(pPager->aInJournal);
  pPager->aInJournal = 0;
#if 0
  if( rc==SQLITE_NOMEM ){
    /* If this was a malloc() failure, then we will not be closing the pager
    ** file. So delete any journal file we may have just created. Otherwise,
    ** the system will get confused, we have a read-lock on the file and a
    ** mysterious journal has appeared in the filesystem.
    */
    /* sqlite3OsDelete(pPager->zJournal); */
  }else{
    /* If we reset the pager here, we will delete pages out from under
    ** various cursors and will ultimately segfault. */
    /* pager_reset(pPager); */
  }
#endif
  return rc;
}

/*
** Acquire a write-lock on the database.  The lock is removed when
** the any of the following happen:
**

#
#***********************************************************************
#
# This file contains tests to ensure that the library handles malloc() failures
# correctly. The emphasis of these tests are the _prepare(), _step() and
# _finalize() calls.
#
# $Id: malloc3.test,v 1.9 2006/01/23 07:52:41 danielk1977 Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Only run these tests if memory debugging is turned on.
if {[info command sqlite_malloc_stat]==""} {
   puts "Skipping malloc tests: not compiled with -DSQLITE_MEMDEBUG..."
................................................................................
    error "Uneven number of arguments to TEST"
  }

  for {set i 0} {$i < $pcstart} {incr i} {
    set k2 [lindex $arglist [expr 2 * $i]]
    set v2 [lindex $arglist [expr 2 * $i + 1]]
    set ac [sqlite3_get_autocommit $::DB]        ;# Auto-Commit
# puts "STARTUP"
    switch -- $k2 {
      -sql  {db eval [lindex $v2 1]}
      -prep {db eval $v2}
    }
    set nac [sqlite3_get_autocommit $::DB]       ;# New Auto-Commit 
    if {$ac && !$nac} {set begin_pc $i}
  }
................................................................................

  set iFail $iFailStart
  set pc $pcstart
  while {$pc*2 < [llength $arglist]} {

    # Id of this iteration:
    set iterid "(pc $pc).(iFail $iFail)"

    set k [lindex $arglist [expr 2 * $pc]]
    set v [lindex $arglist [expr 2 * $pc + 1]]

    switch -- $k {

      -test { 
        foreach {id script} $v {}
................................................................................
      }

      -sql {
        set ::rollback_hook_count 0

        set ac [sqlite3_get_autocommit $::DB]        ;# Auto-Commit
        sqlite_malloc_fail $iFail
# puts "SQL $iterid [lindex $v 1]"
        set rc [catch {db eval [lindex $v 1]} msg]   ;# True error occurs
# puts "rc = $rc msg = \"$msg\""
        set nac [sqlite3_get_autocommit $::DB]       ;# New Auto-Commit 


        if {$rc != 0 && $nac && !$ac} {
          # Before [db eval] the auto-commit flag was clear. Now it
          # is set. Since an error occured we assume this was not a
	  # commit - therefore a rollback occured. Check that the
................................................................................
            incr iFail
            if {$nac && !$ac} {

              if {![lindex $v 0]} {
                error "Statement \"[lindex $v 1]\" caused a rollback"
              }

# puts "Statement \"[lindex $v 1]\" caused a rollback"
              for {set i $begin_pc} {$i < $pc} {incr i} {
                set k2 [lindex $arglist [expr 2 * $i]]
                set v2 [lindex $arglist [expr 2 * $i + 1]]
                set catchupsql ""
                switch -- $k2 {
                  -sql  {set catchupsql [lindex $v2 1]}
                  -prep {set catchupsql $v2}
                }
# puts "CATCHUP $iterid $i $catchupsql"
                db eval $catchupsql
              }
            }
        } else {
            error $msg
        }

        while {[lindex $arglist [expr 2 * ($pc -1)]] == "-test"} {
          incr pc -1
        }
      }

      -prep {
# puts "PREP $iterid $v"
        db eval $v
        incr pc
      }

      default { error "Unknown switch: $k" }
    }
# if {$iFail > ($iFailStart+1)} return
  }
}

# Turn of the Tcl interface's prepared statement caching facility.
db cache size 0

run_test $::run_test_script 9 1
................................................................................
# run_test [lrange $::run_test_script 0 3] 0 63
sqlite_malloc_fail 0
db close

pp_check_for_leaks

finish_test

#
#***********************************************************************
#
# This file contains tests to ensure that the library handles malloc() failures
# correctly. The emphasis of these tests are the _prepare(), _step() and
# _finalize() calls.
#
# $Id: malloc3.test,v 1.10 2007/03/28 01:59:34 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Only run these tests if memory debugging is turned on.
if {[info command sqlite_malloc_stat]==""} {
   puts "Skipping malloc tests: not compiled with -DSQLITE_MEMDEBUG..."
................................................................................
    error "Uneven number of arguments to TEST"
  }

  for {set i 0} {$i < $pcstart} {incr i} {
    set k2 [lindex $arglist [expr 2 * $i]]
    set v2 [lindex $arglist [expr 2 * $i + 1]]
    set ac [sqlite3_get_autocommit $::DB]        ;# Auto-Commit

    switch -- $k2 {
      -sql  {db eval [lindex $v2 1]}
      -prep {db eval $v2}
    }
    set nac [sqlite3_get_autocommit $::DB]       ;# New Auto-Commit 
    if {$ac && !$nac} {set begin_pc $i}
  }
................................................................................

  set iFail $iFailStart
  set pc $pcstart
  while {$pc*2 < [llength $arglist]} {

    # Id of this iteration:
    set iterid "(pc $pc).(iFail $iFail)"

    set k [lindex $arglist [expr 2 * $pc]]
    set v [lindex $arglist [expr 2 * $pc + 1]]

    switch -- $k {

      -test { 
        foreach {id script} $v {}
................................................................................
      }

      -sql {
        set ::rollback_hook_count 0

        set ac [sqlite3_get_autocommit $::DB]        ;# Auto-Commit
        sqlite_malloc_fail $iFail

        set rc [catch {db eval [lindex $v 1]} msg]   ;# True error occurs

        set nac [sqlite3_get_autocommit $::DB]       ;# New Auto-Commit 


        if {$rc != 0 && $nac && !$ac} {
          # Before [db eval] the auto-commit flag was clear. Now it
          # is set. Since an error occured we assume this was not a
	  # commit - therefore a rollback occured. Check that the
................................................................................
            incr iFail
            if {$nac && !$ac} {

              if {![lindex $v 0]} {
                error "Statement \"[lindex $v 1]\" caused a rollback"
              }


              for {set i $begin_pc} {$i < $pc} {incr i} {
                set k2 [lindex $arglist [expr 2 * $i]]
                set v2 [lindex $arglist [expr 2 * $i + 1]]
                set catchupsql ""
                switch -- $k2 {
                  -sql  {set catchupsql [lindex $v2 1]}
                  -prep {set catchupsql $v2}
                }

                db eval $catchupsql
              }
            }
        } else {
            error $msg
        }

        while {[lindex $arglist [expr 2 * ($pc -1)]] == "-test"} {
          incr pc -1
        }
      }

      -prep {

        db eval $v
        incr pc
      }

      default { error "Unknown switch: $k" }
    }

  }
}

# Turn of the Tcl interface's prepared statement caching facility.
db cache size 0

run_test $::run_test_script 9 1
................................................................................
# run_test [lrange $::run_test_script 0 3] 0 63
sqlite_malloc_fail 0
db close

pp_check_for_leaks

finish_test