/* Unless this is a view, open cursors for the table we are 
    ** deleting from and all its indices. If this is a view, then the
    ** only effect this statement has is to fire the INSTEAD OF 
    ** triggers.
    */
    if( !isView ){
      int iAddrOnce = 0;
      u8 p5 = (eOnePass==ONEPASS_OFF ? 0 : OPFLAG_FORDELETE);
      if( eOnePass==ONEPASS_MULTI ){
        iAddrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
      }
      testcase( IsVirtual(pTab) );
      sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, p5, iTabCur, 
                                 aToOpen, &iDataCur, &iIdxCur);
      assert( pPk || IsVirtual(pTab) || iDataCur==iTabCur );
      assert( pPk || IsVirtual(pTab) || iIdxCur==iDataCur+1 );
      if( eOnePass==ONEPASS_MULTI ) sqlite3VdbeJumpHere(v, iAddrOnce);
    }
  
    /* Set up a loop over the rowids/primary-keys that were found in the
    ** where-clause loop above.
................................................................................
  if( pTab->pSelect==0 ){
    u8 p5 = 0;
    sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,iIdxNoSeek);
    sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0));
    if( count ){
      sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT);
    }




    if( iIdxNoSeek>=0 ){
      sqlite3VdbeAddOp1(v, OP_Delete, iIdxNoSeek);
      if( eMode!=ONEPASS_OFF ) p5 = OPFLAG_IDXDELETE;

    }
    if( eMode==ONEPASS_MULTI ) p5 |= OPFLAG_SAVEPOSITION;
    sqlite3VdbeChangeP5(v, p5);
  }

  /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
  ** handle rows (possibly in other tables) that refer via a foreign key

    /* Unless this is a view, open cursors for the table we are 
    ** deleting from and all its indices. If this is a view, then the
    ** only effect this statement has is to fire the INSTEAD OF 
    ** triggers.
    */
    if( !isView ){
      int iAddrOnce = 0;

      if( eOnePass==ONEPASS_MULTI ){
        iAddrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
      }
      testcase( IsVirtual(pTab) );
      sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, OPFLAG_FORDELETE,
                                 iTabCur, aToOpen, &iDataCur, &iIdxCur);
      assert( pPk || IsVirtual(pTab) || iDataCur==iTabCur );
      assert( pPk || IsVirtual(pTab) || iIdxCur==iDataCur+1 );
      if( eOnePass==ONEPASS_MULTI ) sqlite3VdbeJumpHere(v, iAddrOnce);
    }
  
    /* Set up a loop over the rowids/primary-keys that were found in the
    ** where-clause loop above.
................................................................................
  if( pTab->pSelect==0 ){
    u8 p5 = 0;
    sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,iIdxNoSeek);
    sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0));
    if( count ){
      sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT);
    }
    if( eMode!=ONEPASS_OFF ){
      sqlite3VdbeChangeP5(v, OPFLAG_IDXDELETE);
      p5 = OPFLAG_IDXDELETE;
    }
    if( iIdxNoSeek>=0 ){
      sqlite3VdbeAddOp1(v, OP_Delete, iIdxNoSeek);

      p5 = 0;
    }
    if( eMode==ONEPASS_MULTI ) p5 |= OPFLAG_SAVEPOSITION;
    sqlite3VdbeChangeP5(v, p5);
  }

  /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
  ** handle rows (possibly in other tables) that refer via a foreign key

** If pTab is a virtual table, then this routine is a no-op and the
** *piDataCur and *piIdxCur values are left uninitialized.
*/
int sqlite3OpenTableAndIndices(
  Parse *pParse,   /* Parsing context */
  Table *pTab,     /* Table to be opened */
  int op,          /* OP_OpenRead or OP_OpenWrite */
  u8 p5,           /* P5 value for OP_Open* instructions */
  int iBase,       /* Use this for the table cursor, if there is one */
  u8 *aToOpen,     /* If not NULL: boolean for each table and index */
  int *piDataCur,  /* Write the database source cursor number here */
  int *piIdxCur    /* Write the first index cursor number here */
){
  int i;
  int iDb;
................................................................................
  }else{
    sqlite3TableLock(pParse, iDb, pTab->tnum, op==OP_OpenWrite, pTab->zName);
  }
  if( piIdxCur ) *piIdxCur = iBase;
  for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
    int iIdxCur = iBase++;
    assert( pIdx->pSchema==pTab->pSchema );
    if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) && piDataCur ){
      *piDataCur = iIdxCur;
    }
    if( aToOpen==0 || aToOpen[i+1] ){
      sqlite3VdbeAddOp3(v, op, iIdxCur, pIdx->tnum, iDb);
      sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
      sqlite3VdbeChangeP5(v, p5);
      VdbeComment((v, "%s", pIdx->zName));





    }
  }
  if( iBase>pParse->nTab ) pParse->nTab = iBase;
  return i;
}

** If pTab is a virtual table, then this routine is a no-op and the
** *piDataCur and *piIdxCur values are left uninitialized.
*/
int sqlite3OpenTableAndIndices(
  Parse *pParse,   /* Parsing context */
  Table *pTab,     /* Table to be opened */
  int op,          /* OP_OpenRead or OP_OpenWrite */
  u8 p5,           /* P5 value for OP_Open* opcodes (except on WITHOUT ROWID) */
  int iBase,       /* Use this for the table cursor, if there is one */
  u8 *aToOpen,     /* If not NULL: boolean for each table and index */
  int *piDataCur,  /* Write the database source cursor number here */
  int *piIdxCur    /* Write the first index cursor number here */
){
  int i;
  int iDb;
................................................................................
  }else{
    sqlite3TableLock(pParse, iDb, pTab->tnum, op==OP_OpenWrite, pTab->zName);
  }
  if( piIdxCur ) *piIdxCur = iBase;
  for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
    int iIdxCur = iBase++;
    assert( pIdx->pSchema==pTab->pSchema );



    if( aToOpen==0 || aToOpen[i+1] ){
      sqlite3VdbeAddOp3(v, op, iIdxCur, pIdx->tnum, iDb);
      sqlite3VdbeSetP4KeyInfo(pParse, pIdx);

      VdbeComment((v, "%s", pIdx->zName));
    }
    if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){
      if( piDataCur ) *piDataCur = iIdxCur;
    }else{
      sqlite3VdbeChangeP5(v, p5);
    }
  }
  if( iBase>pParse->nTab ) pParse->nTab = iBase;
  return i;
}

  Vdbe *p                    /* The VDBE */
){
  Op *aOp = p->aOp;          /* Copy of p->aOp */
  Op *pOp = aOp;             /* Current operation */
#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
  Op *pOrigOp;               /* Value of pOp at the top of the loop */
#endif



  int rc = SQLITE_OK;        /* Value to return */
  sqlite3 *db = p->db;       /* The database */
  u8 resetSchemaOnFault = 0; /* Reset schema after an error if positive */
  u8 encoding = ENC(db);     /* The database encoding */
  int iCompare = 0;          /* Result of last OP_Compare operation */
  unsigned nVmStep = 0;      /* Number of virtual machine steps */
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
................................................................................
  assert( nField>=0 );
  testcase( nField==0 );  /* Table with INTEGER PRIMARY KEY and nothing else */
  pCur = allocateCursor(p, pOp->p1, nField, iDb, CURTYPE_BTREE);
  if( pCur==0 ) goto no_mem;
  pCur->nullRow = 1;
  pCur->isOrdered = 1;
  pCur->pgnoRoot = p2;



  rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->uc.pCursor);
  pCur->pKeyInfo = pKeyInfo;
  /* Set the VdbeCursor.isTable variable. Previous versions of
  ** SQLite used to check if the root-page flags were sane at this point
  ** and report database corruption if they were not, but this check has
  ** since moved into the btree layer.  */  
  pCur->isTable = pOp->p4type!=P4_KEYINFO;
................................................................................
  ** is being deleted */
  if( pOp->p4.z && pC->isTable && pOp->p5==0 ){
    i64 iKey = 0;
    sqlite3BtreeKeySize(pC->uc.pCursor, &iKey);
    assert( pC->movetoTarget==iKey ); 
  }
#endif
 

  assert( (pOp->p5 & ~(OPFLAG_SAVEPOSITION|OPFLAG_IDXDELETE))==0 );
  assert( OPFLAG_SAVEPOSITION==BTREE_SAVEPOSITION );
  assert( OPFLAG_IDXDELETE==BTREE_IDXDELETE );













  rc = sqlite3BtreeDelete(pC->uc.pCursor, pOp->p5);
  pC->cacheStatus = CACHE_STALE;

  /* Invoke the update-hook if required. */
  if( rc==SQLITE_OK && hasUpdateCallback ){
    db->xUpdateCallback(db->pUpdateArg, SQLITE_DELETE,
                        db->aDb[pC->iDb].zName, pOp->p4.z, pC->movetoTarget);
................................................................................
  assert( pCrsr!=0 );
  assert( pOp->p5==0 );
  r.pKeyInfo = pC->pKeyInfo;
  r.nField = (u16)pOp->p3;
  r.default_rc = 0;
  r.aMem = &aMem[pOp->p2];
#ifdef SQLITE_DEBUG


  { int i; for(i=0; i<r.nField; i++) assert( memIsValid(&r.aMem[i]) ); }







#endif
  rc = sqlite3BtreeMovetoUnpacked(pCrsr, &r, 0, 0, &res);
  if( rc==SQLITE_OK && res==0 ){
    rc = sqlite3BtreeDelete(pCrsr, 0);
  }
  assert( pC->deferredMoveto==0 );
  pC->cacheStatus = CACHE_STALE;
................................................................................
  ** release the mutexes on btrees that were acquired at the
  ** top. */
vdbe_return:
  db->lastRowid = lastRowid;
  testcase( nVmStep>0 );
  p->aCounter[SQLITE_STMTSTATUS_VM_STEP] += (int)nVmStep;
  sqlite3VdbeLeave(p);

  return rc;

  /* Jump to here if a string or blob larger than SQLITE_MAX_LENGTH
  ** is encountered.
  */
too_big:
  sqlite3VdbeError(p, "string or blob too big");

  Vdbe *p                    /* The VDBE */
){
  Op *aOp = p->aOp;          /* Copy of p->aOp */
  Op *pOp = aOp;             /* Current operation */
#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
  Op *pOrigOp;               /* Value of pOp at the top of the loop */
#endif
#ifdef SQLITE_DEBUG
  int nExtraDelete = 0;      /* Verifies FORDELETE and IDXDELETE flags */
#endif
  int rc = SQLITE_OK;        /* Value to return */
  sqlite3 *db = p->db;       /* The database */
  u8 resetSchemaOnFault = 0; /* Reset schema after an error if positive */
  u8 encoding = ENC(db);     /* The database encoding */
  int iCompare = 0;          /* Result of last OP_Compare operation */
  unsigned nVmStep = 0;      /* Number of virtual machine steps */
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
................................................................................
  assert( nField>=0 );
  testcase( nField==0 );  /* Table with INTEGER PRIMARY KEY and nothing else */
  pCur = allocateCursor(p, pOp->p1, nField, iDb, CURTYPE_BTREE);
  if( pCur==0 ) goto no_mem;
  pCur->nullRow = 1;
  pCur->isOrdered = 1;
  pCur->pgnoRoot = p2;
#ifdef SQLITE_DEBUG
  pCur->wrFlag = wrFlag;
#endif
  rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->uc.pCursor);
  pCur->pKeyInfo = pKeyInfo;
  /* Set the VdbeCursor.isTable variable. Previous versions of
  ** SQLite used to check if the root-page flags were sane at this point
  ** and report database corruption if they were not, but this check has
  ** since moved into the btree layer.  */  
  pCur->isTable = pOp->p4type!=P4_KEYINFO;
................................................................................
  ** is being deleted */
  if( pOp->p4.z && pC->isTable && pOp->p5==0 ){
    i64 iKey = 0;
    sqlite3BtreeKeySize(pC->uc.pCursor, &iKey);
    assert( pC->movetoTarget==iKey ); 
  }
#endif

  /* Only flags that can be set are SAVEPOISTION and IDXDELETE */ 
  assert( (pOp->p5 & ~(OPFLAG_SAVEPOSITION|OPFLAG_IDXDELETE))==0 );
  assert( OPFLAG_SAVEPOSITION==BTREE_SAVEPOSITION );
  assert( OPFLAG_IDXDELETE==BTREE_IDXDELETE );

#ifdef SQLITE_DEBUG
  if( pC->isEphemeral==0
   && (pOp->p5 & OPFLAG_IDXDELETE)==0
   && (pC->wrFlag & OPFLAG_FORDELETE)==0
  ){
    nExtraDelete++;
  }
  if( pOp->p2 & OPFLAG_NCHANGE ){
    nExtraDelete--;
  }
#endif

  rc = sqlite3BtreeDelete(pC->uc.pCursor, pOp->p5);
  pC->cacheStatus = CACHE_STALE;

  /* Invoke the update-hook if required. */
  if( rc==SQLITE_OK && hasUpdateCallback ){
    db->xUpdateCallback(db->pUpdateArg, SQLITE_DELETE,
                        db->aDb[pC->iDb].zName, pOp->p4.z, pC->movetoTarget);
................................................................................
  assert( pCrsr!=0 );
  assert( pOp->p5==0 );
  r.pKeyInfo = pC->pKeyInfo;
  r.nField = (u16)pOp->p3;
  r.default_rc = 0;
  r.aMem = &aMem[pOp->p2];
#ifdef SQLITE_DEBUG
  {
    int i;
    for(i=0; i<r.nField; i++) assert( memIsValid(&r.aMem[i]) );
    if( pC->isEphemeral==0
     && (pOp->p5 & OPFLAG_IDXDELETE)==0
     && (pC->wrFlag & OPFLAG_FORDELETE)==0
    ){
      nExtraDelete++;
    }
  }
#endif
  rc = sqlite3BtreeMovetoUnpacked(pCrsr, &r, 0, 0, &res);
  if( rc==SQLITE_OK && res==0 ){
    rc = sqlite3BtreeDelete(pCrsr, 0);
  }
  assert( pC->deferredMoveto==0 );
  pC->cacheStatus = CACHE_STALE;
................................................................................
  ** release the mutexes on btrees that were acquired at the
  ** top. */
vdbe_return:
  db->lastRowid = lastRowid;
  testcase( nVmStep>0 );
  p->aCounter[SQLITE_STMTSTATUS_VM_STEP] += (int)nVmStep;
  sqlite3VdbeLeave(p);
  assert( nExtraDelete==0 || sqlite3_strlike("DELETE%",p->zSql,0)!=0 );
  return rc;

  /* Jump to here if a string or blob larger than SQLITE_MAX_LENGTH
  ** is encountered.
  */
too_big:
  sqlite3VdbeError(p, "string or blob too big");

  u8 eCurType;          /* One of the CURTYPE_* values above */
  i8 iDb;               /* Index of cursor database in db->aDb[] (or -1) */
  u8 nullRow;           /* True if pointing to a row with no data */
  u8 deferredMoveto;    /* A call to sqlite3BtreeMoveto() is needed */
  u8 isTable;           /* True for rowid tables.  False for indexes */
#ifdef SQLITE_DEBUG
  u8 seekOp;            /* Most recent seek operation on this cursor */

#endif
  Bool isEphemeral:1;   /* True for an ephemeral table */
  Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */
  Bool isOrdered:1;     /* True if the underlying table is BTREE_UNORDERED */
  Pgno pgnoRoot;        /* Root page of the open btree cursor */
  i16 nField;           /* Number of fields in the header */
  u16 nHdrParsed;       /* Number of header fields parsed so far */

  u8 eCurType;          /* One of the CURTYPE_* values above */
  i8 iDb;               /* Index of cursor database in db->aDb[] (or -1) */
  u8 nullRow;           /* True if pointing to a row with no data */
  u8 deferredMoveto;    /* A call to sqlite3BtreeMoveto() is needed */
  u8 isTable;           /* True for rowid tables.  False for indexes */
#ifdef SQLITE_DEBUG
  u8 seekOp;            /* Most recent seek operation on this cursor */
  u8 wrFlag;            /* The wrFlag argument to sqlite3BtreeCursor() */
#endif
  Bool isEphemeral:1;   /* True for an ephemeral table */
  Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */
  Bool isOrdered:1;     /* True if the underlying table is BTREE_UNORDERED */
  Pgno pgnoRoot;        /* Root page of the open btree cursor */
  i16 nField;           /* Number of fields in the header */
  u16 nHdrParsed;       /* Number of header fields parsed so far */

  } 10

  # Modify 5 rows.
  do_changes_test 1.$tn.3 {
    UPDATE t1 SET b=b+1 WHERE a<5;
  } 5


  # Delete 4 rows
  do_changes_test 1.$tn.4 {
    DELETE FROM t1 WHERE a>6
  } 4

  # Check the "on the database connecton specified" part of hte
  # requirement - changes made by other connections do not show up in

  } 10

  # Modify 5 rows.
  do_changes_test 1.$tn.3 {
    UPDATE t1 SET b=b+1 WHERE a<5;
  } 5

exit
  # Delete 4 rows
  do_changes_test 1.$tn.4 {
    DELETE FROM t1 WHERE a>6
  } 4

  # Check the "on the database connecton specified" part of hte
  # requirement - changes made by other connections do not show up in