**
*************************************************************************
** Main file for the SQLite library.  The routines in this file
** implement the programmer interface to the library.  Routines in
** other files are for internal use by SQLite and should not be
** accessed by users of the library.
**
** $Id: main.c,v 1.559 2009/06/25 01:47:12 drh Exp $
*/
#include "sqliteInt.h"

#ifdef SQLITE_ENABLE_FTS3
# include "fts3.h"
#endif
#ifdef SQLITE_ENABLE_RTREE
................................................................................
      sqlite3_free(db);
      db = 0;
      goto opendb_out;
    }
  }
  sqlite3_mutex_enter(db->mutex);
  db->errMask = 0xff;
  db->priorNewRowid = 0;
  db->nDb = 2;
  db->magic = SQLITE_MAGIC_BUSY;
  db->aDb = db->aDbStatic;

  assert( sizeof(db->aLimit)==sizeof(aHardLimit) );
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->autoCommit = 1;

**
*************************************************************************
** Main file for the SQLite library.  The routines in this file
** implement the programmer interface to the library.  Routines in
** other files are for internal use by SQLite and should not be
** accessed by users of the library.
**
** $Id: main.c,v 1.560 2009/06/26 15:14:55 drh Exp $
*/
#include "sqliteInt.h"

#ifdef SQLITE_ENABLE_FTS3
# include "fts3.h"
#endif
#ifdef SQLITE_ENABLE_RTREE
................................................................................
      sqlite3_free(db);
      db = 0;
      goto opendb_out;
    }
  }
  sqlite3_mutex_enter(db->mutex);
  db->errMask = 0xff;

  db->nDb = 2;
  db->magic = SQLITE_MAGIC_BUSY;
  db->aDb = db->aDbStatic;

  assert( sizeof(db->aLimit)==sizeof(aHardLimit) );
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->autoCommit = 1;

**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** Internal interface definitions for SQLite.
**
** @(#) $Id: sqliteInt.h,v 1.889 2009/06/24 11:08:14 drh Exp $
*/
#ifndef _SQLITEINT_H_
#define _SQLITEINT_H_

/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
................................................................................
  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
  u8 dfltJournalMode;           /* Default journal mode for attached dbs */
  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
  int nextPagesize;             /* Pagesize after VACUUM if >0 */
  int nTable;                   /* Number of tables in the database */
  CollSeq *pDfltColl;           /* The default collating sequence (BINARY) */
  i64 lastRowid;                /* ROWID of most recent insert (see above) */
  i64 priorNewRowid;            /* Last randomly generated ROWID */
  u32 magic;                    /* Magic number for detect library misuse */
  int nChange;                  /* Value returned by sqlite3_changes() */
  int nTotalChange;             /* Value returned by sqlite3_total_changes() */
  sqlite3_mutex *mutex;         /* Connection mutex */
  int aLimit[SQLITE_N_LIMIT];   /* Limits */
  struct sqlite3InitInfo {      /* Information used during initialization */
    int iDb;                    /* When back is being initialized */

**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** Internal interface definitions for SQLite.
**
** @(#) $Id: sqliteInt.h,v 1.890 2009/06/26 15:14:55 drh Exp $
*/
#ifndef _SQLITEINT_H_
#define _SQLITEINT_H_

/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
................................................................................
  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
  u8 dfltJournalMode;           /* Default journal mode for attached dbs */
  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
  int nextPagesize;             /* Pagesize after VACUUM if >0 */
  int nTable;                   /* Number of tables in the database */
  CollSeq *pDfltColl;           /* The default collating sequence (BINARY) */
  i64 lastRowid;                /* ROWID of most recent insert (see above) */

  u32 magic;                    /* Magic number for detect library misuse */
  int nChange;                  /* Value returned by sqlite3_changes() */
  int nTotalChange;             /* Value returned by sqlite3_total_changes() */
  sqlite3_mutex *mutex;         /* Connection mutex */
  int aLimit[SQLITE_N_LIMIT];   /* Limits */
  struct sqlite3InitInfo {      /* Information used during initialization */
    int iDb;                    /* When back is being initialized */

**
** Various scripts scan this source file in order to generate HTML
** documentation, headers files, or other derived files.  The formatting
** of the code in this file is, therefore, important.  See other comments
** in this file for details.  If in doubt, do not deviate from existing
** commenting and indentation practices when changing or adding code.
**
** $Id: vdbe.c,v 1.864 2009/06/25 01:47:12 drh Exp $
*/
#include "sqliteInt.h"
#include "vdbeInt.h"

/*
** The following global variable is incremented every time a cursor
** moves, either by the OP_SeekXX, OP_Next, or OP_Prev opcodes.  The test
................................................................................
#endif

      sqlite3BtreeSetCachedRowid(pC->pCursor, v<MAX_ROWID ? v+1 : 0);
    }
    if( pC->useRandomRowid ){
      assert( pOp->p3==0 );  /* We cannot be in random rowid mode if this is
                             ** an AUTOINCREMENT table. */
      v = db->priorNewRowid;
      cnt = 0;
      do{
        if( cnt==0 && (v&0xffffff)==v ){
          v++;
        }else{
          sqlite3_randomness(sizeof(v), &v);
          if( cnt<5 ) v &= 0xffffff;
        }
        rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)v, 0, &res);
        cnt++;
      }while( cnt<100 && rc==SQLITE_OK && res==0 );
      db->priorNewRowid = v;
      if( rc==SQLITE_OK && res==0 ){
        rc = SQLITE_FULL;
        goto abort_due_to_error;
      }
    }
    pC->rowidIsValid = 0;
    pC->deferredMoveto = 0;

**
** Various scripts scan this source file in order to generate HTML
** documentation, headers files, or other derived files.  The formatting
** of the code in this file is, therefore, important.  See other comments
** in this file for details.  If in doubt, do not deviate from existing
** commenting and indentation practices when changing or adding code.
**
** $Id: vdbe.c,v 1.865 2009/06/26 15:14:55 drh Exp $
*/
#include "sqliteInt.h"
#include "vdbeInt.h"

/*
** The following global variable is incremented every time a cursor
** moves, either by the OP_SeekXX, OP_Next, or OP_Prev opcodes.  The test
................................................................................
#endif

      sqlite3BtreeSetCachedRowid(pC->pCursor, v<MAX_ROWID ? v+1 : 0);
    }
    if( pC->useRandomRowid ){
      assert( pOp->p3==0 );  /* We cannot be in random rowid mode if this is
                             ** an AUTOINCREMENT table. */
      v = db->lastRowid;
      cnt = 0;
      do{
        if( cnt==0 && (v&0xffffff)==v ){
          v++;
        }else{
          sqlite3_randomness(sizeof(v), &v);
          if( cnt<5 ) v &= 0xffffff;
        }
        rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)v, 0, &res);
        cnt++;
      }while( cnt<100 && rc==SQLITE_OK && res==0 );

      if( rc==SQLITE_OK && res==0 ){
        rc = SQLITE_FULL;
        goto abort_due_to_error;
      }
    }
    pC->rowidIsValid = 0;
    pC->deferredMoveto = 0;

#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the magic ROWID column that is
# found on all tables.
#
# $Id: rowid.test,v 1.20 2008/01/19 20:11:26 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Basic ROWID functionality tests.
#
do_test rowid-1.1 {
................................................................................
# the rowid guessing loop to collide with prior rowids, and test the
# loop out to its limit of 100 iterations.  After 100 collisions, the
# rowid guesser gives up and reports SQLITE_FULL.
#
do_test rowid-12.1 {
  execsql {
    CREATE TABLE t7(x INTEGER PRIMARY KEY, y);

    INSERT INTO t7 VALUES(9223372036854775807,'a');
    SELECT y FROM t7;
  }
} {a}
do_test rowid-12.2 {
  db close
  sqlite3 db test.db
................................................................................
  save_prng_state
  execsql {
    INSERT INTO t7 VALUES(NULL,'b');
    SELECT x, y FROM t7;
  }
} {1 b 9223372036854775807 a}
execsql {INSERT INTO t7 VALUES(2,'y');}
for {set i 1} {$i<=101} {incr i} {
  do_test rowid-12.3.$i {

    restore_prng_state
    execsql {
      INSERT INTO t7 VALUES(NULL,'x');
      INSERT OR IGNORE INTO t7 VALUES(last_insert_rowid()+1,'y');
      SELECT count(*) FROM t7 WHERE y=='x';
    }
  } $i
}
do_test rowid-12.4 {

  restore_prng_state
  catchsql {
    INSERT INTO t7 VALUES(NULL,'x');
  }
} {1 {database or disk is full}}


finish_test

#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the magic ROWID column that is
# found on all tables.
#
# $Id: rowid.test,v 1.21 2009/06/26 15:14:55 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Basic ROWID functionality tests.
#
do_test rowid-1.1 {
................................................................................
# the rowid guessing loop to collide with prior rowids, and test the
# loop out to its limit of 100 iterations.  After 100 collisions, the
# rowid guesser gives up and reports SQLITE_FULL.
#
do_test rowid-12.1 {
  execsql {
    CREATE TABLE t7(x INTEGER PRIMARY KEY, y);
    CREATE TABLE t7temp(a INTEGER PRIMARY KEY);
    INSERT INTO t7 VALUES(9223372036854775807,'a');
    SELECT y FROM t7;
  }
} {a}
do_test rowid-12.2 {
  db close
  sqlite3 db test.db
................................................................................
  save_prng_state
  execsql {
    INSERT INTO t7 VALUES(NULL,'b');
    SELECT x, y FROM t7;
  }
} {1 b 9223372036854775807 a}
execsql {INSERT INTO t7 VALUES(2,'y');}
for {set i 1} {$i<100} {incr i} {
  do_test rowid-12.3.$i {
    db eval {DELETE FROM t7temp; INSERT INTO t7temp VALUES(1);}
    restore_prng_state
    execsql {
      INSERT INTO t7 VALUES(NULL,'x');

      SELECT count(*) FROM t7 WHERE y=='x';
    }
  } $i
}
do_test rowid-12.4 {
  db eval {DELETE FROM t7temp; INSERT INTO t7temp VALUES(1);}
  restore_prng_state
  catchsql {
    INSERT INTO t7 VALUES(NULL,'x');
  }
} {1 {database or disk is full}}


finish_test