# exception. But since bm25() can now used the cached structure record,
# it never sees the corruption introduced by funk() and so the following 
# statement no longer fails.
#
do_catchsql_test 16.2 {
  SELECT funk(), bm25(n1), funk() FROM n1 WHERE n1 MATCH 'a+b+c+d'
} {0 {{} -1e-06 {}}}
# {1 {SQL logic error or missing database}}

#-------------------------------------------------------------------------
#
reset_db
do_execsql_test 17.1 {
  CREATE VIRTUAL TABLE b2 USING fts5(x, detail=%DETAIL%);
  INSERT INTO b2 VALUES('a');
................................................................................
  SELECT rowid FROM t9('a*')
} {1}

}


finish_test

# exception. But since bm25() can now used the cached structure record,
# it never sees the corruption introduced by funk() and so the following 
# statement no longer fails.
#
do_catchsql_test 16.2 {
  SELECT funk(), bm25(n1), funk() FROM n1 WHERE n1 MATCH 'a+b+c+d'
} {0 {{} -1e-06 {}}}
# {1 {SQL logic error}}

#-------------------------------------------------------------------------
#
reset_db
do_execsql_test 17.1 {
  CREATE VIRTUAL TABLE b2 USING fts5(x, detail=%DETAIL%);
  INSERT INTO b2 VALUES('a');
................................................................................
  SELECT rowid FROM t9('a*')
} {1}

}


finish_test

  INSERT INTO x1 VALUES($doc);
}

} ;# foreach_detail_mode...


finish_test

  INSERT INTO x1 VALUES($doc);
}

} ;# foreach_detail_mode...


finish_test

} {
  do_execsql_test 2.3.$tn {
    SELECT fts5_expr_tcl($expr, 'N $x')
  } [list $tclexpr]
}

finish_test

} {
  do_execsql_test 2.3.$tn {
    SELECT fts5_expr_tcl($expr, 'N $x')
  } [list $tclexpr]
}

finish_test

  catchsql COMMIT
}

}

finish_test

  catchsql COMMIT
}

}

finish_test

    SELECT fts5_test_phrasecount(t9) FROM t9 WHERE t9 MATCH $q LIMIT 1
  } $cnt
}

}

finish_test

    SELECT fts5_test_phrasecount(t9) FROM t9 WHERE t9 MATCH $q LIMIT 1
  } $cnt
}

}

finish_test

do_execsql_test 5.1 {
  SELECT snippet(p1, 0, '[', ']', '...', 6) FROM p1('x');
} {{[x] a a a a a...}}

} ;# foreach_detail_mode 

finish_test

do_execsql_test 5.1 {
  SELECT snippet(p1, 0, '[', ']', '...', 6) FROM p1('x');
} {{[x] a a a a a...}}

} ;# foreach_detail_mode 

finish_test

  }
}

} ;# foreach_detail_mode


finish_test

  }
}

} ;# foreach_detail_mode


finish_test

} {10000}

} ;# foreach_detail_mode

#db eval {SELECT rowid, fts5_decode(rowid, block) aS r FROM t1_data} {puts $r}

finish_test

} {10000}

} ;# foreach_detail_mode

#db eval {SELECT rowid, fts5_decode(rowid, block) aS r FROM t1_data} {puts $r}

finish_test

do_execsql_test 1.2 {
  INSERT INTO t1(t1) VALUES('integrity-check');
}
}


finish_test

do_execsql_test 1.2 {
  INSERT INTO t1(t1) VALUES('integrity-check');
}
}


finish_test

  }
}

do_execsql_test 2.0 { INSERT INTO t1(t1) VALUES('integrity-check') }


finish_test

  }
}

do_execsql_test 2.0 { INSERT INTO t1(t1) VALUES('integrity-check') }


finish_test

  {[a b c] [c d e]}
  {[a b c d e]}
}

}

finish_test

  {[a b c] [c d e]}
  {[a b c d e]}
}

}

finish_test

  1 ""
  2 "fname"
  3 "fname(X'234ab')"
  4 "myfunc(-1.,'abc')"
} {
  do_test 2.2.$tn {
    catchsql { INSERT INTO ft1(ft1, rank) VALUES('rank', $defn) }
  } {1 {SQL logic error or missing database}}
}

#-------------------------------------------------------------------------
# Assorted tests of the tcl interface for creating extension functions.
#

do_execsql_test 3.1 {
................................................................................
  SELECT *, rank FROM t3 WHERE t3 MATCH 'a' AND rank MATCH NULL
} {1 {parse error in rank function: }}

} ;# foreach_detail_mode


finish_test

  1 ""
  2 "fname"
  3 "fname(X'234ab')"
  4 "myfunc(-1.,'abc')"
} {
  do_test 2.2.$tn {
    catchsql { INSERT INTO ft1(ft1, rank) VALUES('rank', $defn) }
  } {1 {SQL logic error}}
}

#-------------------------------------------------------------------------
# Assorted tests of the tcl interface for creating extension functions.
#

do_execsql_test 3.1 {
................................................................................
  SELECT *, rank FROM t3 WHERE t3 MATCH 'a' AND rank MATCH NULL
} {1 {parse error in rank function: }}

} ;# foreach_detail_mode


finish_test

do_execsql_test 3.3 {
  COMMIT;
  SELECT rowid FROM abc WHERE abc MATCH 'a';
} {1 2}

finish_test

do_execsql_test 3.3 {
  COMMIT;
  SELECT rowid FROM abc WHERE abc MATCH 'a';
} {1 2}

finish_test

} {
  do_auto_test 4.$tn yy $expr
}



finish_test

} {
  do_auto_test 4.$tn yy $expr
}



finish_test

} {
  9 10
}



finish_test

} {
  9 10
}



finish_test

db eval { 
  SELECT aux_function_2(f1, 2, 'A'), aux_function_2(f1, 2, 'B') 
  FROM f1 WHERE f1 MATCH 'a'
  ORDER BY rowid ASC
}

finish_test

db eval { 
  SELECT aux_function_2(f1, 2, 'A'), aux_function_2(f1, 2, 'B') 
  FROM f1 WHERE f1 MATCH 'a'
  ORDER BY rowid ASC
}

finish_test

    set doc [string repeat "$t " 150000000]
    execsql { INSERT INTO t1 VALUES($doc) }
  }
  execsql { INSERT INTO t1(t1) VALUES('integrity-check') }
} {}

finish_test

    set doc [string repeat "$t " 150000000]
    execsql { INSERT INTO t1 VALUES($doc) }
  }
  execsql { INSERT INTO t1(t1) VALUES('integrity-check') }
} {}

finish_test

    do_execsql_test 2.[string range $v 0 0] {
      SELECT rowid FROM t1($v) ORDER BY rowid DESC
    } [lsort -integer -decr $res]
  }
}

finish_test

    do_execsql_test 2.[string range $v 0 0] {
      SELECT rowid FROM t1($v) ORDER BY rowid DESC
    } [lsort -integer -decr $res]
  }
}

finish_test

  do_catchsql_test 4.1 {
    SELECT * FROM t1 WHERE rowid MATCH 'a'
  } {1 {unable to use function MATCH in the requested context}}
}


finish_test

  do_catchsql_test 4.1 {
    SELECT * FROM t1 WHERE rowid MATCH 'a'
  } {1 {unable to use function MATCH in the requested context}}
}


finish_test

  5 "f1(x':;')"
  6 "f1(x'[]')"
  7 "f1(x'{}')"
  8 "f1('abc)"
} {
  do_catchsql_test 3.$tn {
    INSERT INTO t1(t1, rank) VALUES('rank', $val);
  } {1 {SQL logic error or missing database}}
}

#-------------------------------------------------------------------------
# The parsing of SQL literals specified as part of 'rank' options.
#
do_execsql_test 4.0 {
  CREATE VIRTUAL TABLE zzz USING fts5(one);
................................................................................
#   9.5.* 'hashsize' options.
#
do_execsql_test 9.0 {
  CREATE VIRTUAL TABLE abc USING fts5(a, b);
} {}
do_catchsql_test 9.1.1 {
  INSERT INTO abc(abc, rank) VALUES('pgsz', -5);
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.1.2 {
  INSERT INTO abc(abc, rank) VALUES('pgsz', 50000000);
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.1.3 {
  INSERT INTO abc(abc, rank) VALUES('pgsz', 66.67);
} {1 {SQL logic error or missing database}}

do_catchsql_test 9.2.1 {
  INSERT INTO abc(abc, rank) VALUES('automerge', -5);
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.2.2 {
  INSERT INTO abc(abc, rank) VALUES('automerge', 50000000);
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.2.3 {
  INSERT INTO abc(abc, rank) VALUES('automerge', 66.67);
} {1 {SQL logic error or missing database}}
do_execsql_test 9.2.4 {
  INSERT INTO abc(abc, rank) VALUES('automerge', 1);
} {}

do_catchsql_test 9.3.1 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', -5);
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.3.2 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', 66.67);
} {1 {SQL logic error or missing database}}
do_execsql_test 9.3.3 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', 1);
} {}
do_execsql_test 9.3.4 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', 50000000);
} {}

do_catchsql_test 9.4.1 {
  INSERT INTO abc(abc, rank) VALUES('nosuchoption', 1);
} {1 {SQL logic error or missing database}}

do_catchsql_test 9.5.1 {
  INSERT INTO abc(abc, rank) VALUES('hashsize', 'not an integer');
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.5.2 {
  INSERT INTO abc(abc, rank) VALUES('hashsize', -500000);
} {1 {SQL logic error or missing database}}
do_catchsql_test 9.5.3 {
  INSERT INTO abc(abc, rank) VALUES('hashsize', 500000);
} {0 {}}

#-------------------------------------------------------------------------
# Too many prefix indexes. Maximum allowed is 31.
#
................................................................................
} {
  set res [list 1 {malformed detail=... directive}]
  do_catchsql_test 11.$tn "CREATE VIRTUAL TABLE f1 USING fts5(x, $opt)" $res
}

do_catchsql_test 12.1 {
  INSERT INTO t1(t1, rank) VALUES('rank', NULL);;
} {1 {SQL logic error or missing database}}

#-------------------------------------------------------------------------
# errors in the 'usermerge' option
#
do_execsql_test 13.0 {
  CREATE VIRTUAL TABLE tt USING fts5(ttt);
}
................................................................................
foreach {tn val} {
  1     -1
  2     4.2
  3     17
  4     1
} {
  set sql "INSERT INTO tt(tt, rank) VALUES('usermerge', $val)"
  do_catchsql_test 13.$tn $sql {1 {SQL logic error or missing database}}
}

finish_test

  5 "f1(x':;')"
  6 "f1(x'[]')"
  7 "f1(x'{}')"
  8 "f1('abc)"
} {
  do_catchsql_test 3.$tn {
    INSERT INTO t1(t1, rank) VALUES('rank', $val);
  } {1 {SQL logic error}}
}

#-------------------------------------------------------------------------
# The parsing of SQL literals specified as part of 'rank' options.
#
do_execsql_test 4.0 {
  CREATE VIRTUAL TABLE zzz USING fts5(one);
................................................................................
#   9.5.* 'hashsize' options.
#
do_execsql_test 9.0 {
  CREATE VIRTUAL TABLE abc USING fts5(a, b);
} {}
do_catchsql_test 9.1.1 {
  INSERT INTO abc(abc, rank) VALUES('pgsz', -5);
} {1 {SQL logic error}}
do_catchsql_test 9.1.2 {
  INSERT INTO abc(abc, rank) VALUES('pgsz', 50000000);
} {1 {SQL logic error}}
do_catchsql_test 9.1.3 {
  INSERT INTO abc(abc, rank) VALUES('pgsz', 66.67);
} {1 {SQL logic error}}

do_catchsql_test 9.2.1 {
  INSERT INTO abc(abc, rank) VALUES('automerge', -5);
} {1 {SQL logic error}}
do_catchsql_test 9.2.2 {
  INSERT INTO abc(abc, rank) VALUES('automerge', 50000000);
} {1 {SQL logic error}}
do_catchsql_test 9.2.3 {
  INSERT INTO abc(abc, rank) VALUES('automerge', 66.67);
} {1 {SQL logic error}}
do_execsql_test 9.2.4 {
  INSERT INTO abc(abc, rank) VALUES('automerge', 1);
} {}

do_catchsql_test 9.3.1 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', -5);
} {1 {SQL logic error}}
do_catchsql_test 9.3.2 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', 66.67);
} {1 {SQL logic error}}
do_execsql_test 9.3.3 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', 1);
} {}
do_execsql_test 9.3.4 {
  INSERT INTO abc(abc, rank) VALUES('crisismerge', 50000000);
} {}

do_catchsql_test 9.4.1 {
  INSERT INTO abc(abc, rank) VALUES('nosuchoption', 1);
} {1 {SQL logic error}}

do_catchsql_test 9.5.1 {
  INSERT INTO abc(abc, rank) VALUES('hashsize', 'not an integer');
} {1 {SQL logic error}}
do_catchsql_test 9.5.2 {
  INSERT INTO abc(abc, rank) VALUES('hashsize', -500000);
} {1 {SQL logic error}}
do_catchsql_test 9.5.3 {
  INSERT INTO abc(abc, rank) VALUES('hashsize', 500000);
} {0 {}}

#-------------------------------------------------------------------------
# Too many prefix indexes. Maximum allowed is 31.
#
................................................................................
} {
  set res [list 1 {malformed detail=... directive}]
  do_catchsql_test 11.$tn "CREATE VIRTUAL TABLE f1 USING fts5(x, $opt)" $res
}

do_catchsql_test 12.1 {
  INSERT INTO t1(t1, rank) VALUES('rank', NULL);;
} {1 {SQL logic error}}

#-------------------------------------------------------------------------
# errors in the 'usermerge' option
#
do_execsql_test 13.0 {
  CREATE VIRTUAL TABLE tt USING fts5(ttt);
}
................................................................................
foreach {tn val} {
  1     -1
  2     4.2
  3     17
  4     1
} {
  set sql "INSERT INTO tt(tt, rank) VALUES('usermerge', $val)"
  do_catchsql_test 13.$tn $sql {1 {SQL logic error}}
}

finish_test

  REPLACE INTO tbl VALUES(1, '4 5 6', '3 2 1');
  DELETE FROM tbl WHERE a=100;

  INSERT INTO fts_idx(fts_idx) VALUES('integrity-check');
}

finish_test

  REPLACE INTO tbl VALUES(1, '4 5 6', '3 2 1');
  DELETE FROM tbl WHERE a=100;

  INSERT INTO fts_idx(fts_idx) VALUES('integrity-check');
}

finish_test

do_execsql_test 6.2 {
  DROP TABLE xx;
  SELECT name FROM sqlite_master;
} {}


finish_test

do_execsql_test 6.2 {
  DROP TABLE xx;
  SELECT name FROM sqlite_master;
} {}


finish_test

do_catchsql_test 3.1 {
  DELETE FROM t3_content WHERE rowid = 3;
  SELECT * FROM t3 WHERE t3 MATCH 'o';
} {1 {database disk image is malformed}}

finish_test

do_catchsql_test 3.1 {
  DELETE FROM t3_content WHERE rowid = 3;
  SELECT * FROM t3 WHERE t3 MATCH 'o';
} {1 {database disk image is malformed}}

finish_test

do_catchsql_test 6.2 {
  SELECT colsize(x5, 0) FROM x5 WHERE x5 MATCH 'a'
} {1 SQLITE_CORRUPT_VTAB}


sqlite3_fts5_may_be_corrupt 0
finish_test

do_catchsql_test 6.2 {
  SELECT colsize(x5, 0) FROM x5 WHERE x5 MATCH 'a'
} {1 SQLITE_CORRUPT_VTAB}


sqlite3_fts5_may_be_corrupt 0
finish_test

} {}
do_catchsql_test 9.2.2 {
  SELECT * FROM t1('one AND two');
} {1 {database disk image is malformed}}

sqlite3_fts5_may_be_corrupt 0
finish_test

} {}
do_catchsql_test 9.2.2 {
  SELECT * FROM t1('one AND two');
} {1 {database disk image is malformed}}

sqlite3_fts5_may_be_corrupt 0
finish_test

  for {set i 0} {$i < 5} {incr i} {
    execsql { INSERT INTO t1(t1, rank) VALUES('merge', 1) }
    execsql { INSERT INTO t1(t1) VALUES('integrity-check') }
  }
} {}

finish_test

  for {set i 0} {$i < 5} {incr i} {
    execsql { INSERT INTO t1(t1, rank) VALUES('merge', 1) }
    execsql { INSERT INTO t1(t1) VALUES('integrity-check') }
  }
} {}

finish_test

    (SELECT sum(length(block)) from t2_data) <
    (SELECT sum(length(block)) from t3_data)
} {1}



finish_test

    (SELECT sum(length(block)) from t2_data) <
    (SELECT sum(length(block)) from t3_data)
} {1}



finish_test

  } {}

  do_determin_test 1.4
}


finish_test

  } {}

  do_determin_test 1.4
}


finish_test

}

} ;# foreach_detail_mode



finish_test

}

} ;# foreach_detail_mode



finish_test

do_execsql_test 1.2 {
  INSERT INTO ccc(ccc) VALUES('integrity-check');
}


finish_test

do_execsql_test 1.2 {
  INSERT INTO ccc(ccc) VALUES('integrity-check');
}


finish_test

do_execsql_test 3.3 {
  SELECT rowid, bm25(e1) FROM e1 WHERE e1 MATCH '"/" OR "just"' ORDER BY rank;
} {1 -1e-06}



finish_test

do_execsql_test 3.3 {
  SELECT rowid, bm25(e1) FROM e1 WHERE e1 MATCH '"/" OR "just"' ORDER BY rank;
} {1 -1e-06}



finish_test

    if {$ls != "2 0"} { error "fts5_level_segs says {$ls}" }
  }
}



finish_test

    if {$ls != "2 0"} { error "fts5_level_segs says {$ls}" }
  }
}



finish_test

    );
  }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

    );
  }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

} -test {
  faultsim_test_result [list 0 {}]
}



finish_test

} -test {
  faultsim_test_result [list 0 {}]
}



finish_test

} -body {
  db eval { ALTER TABLE "tbl one" RENAME TO "tbl two" }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

} -body {
  db eval { ALTER TABLE "tbl one" RENAME TO "tbl two" }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

      9 x 1 {}
  ]]
}



finish_test

      9 x 1 {}
  ]]
}



finish_test

  faultsim_test_result {0 {}} {1 {initialization of fts5 failed: }}
  if {$testrc==0} {
    db eval { CREATE VIRTUAL TABLE temp.t1 USING fts5(x) }
  }
  db close
}
finish_test

  faultsim_test_result {0 {}} {1 {initialization of fts5 failed: }}
  if {$testrc==0} {
    db eval { CREATE VIRTUAL TABLE temp.t1 USING fts5(x) }
  }
  db close
}
finish_test

do_faultsim_test 2.2 -faults oom-* -body {
  db eval { SELECT * FROM xy('""') }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

do_faultsim_test 2.2 -faults oom-* -body {
  db eval { SELECT * FROM xy('""') }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

  execsql { INSERT INTO x2(x2) VALUES('optimize') }
} -test {
  faultsim_test_result {0 {}} {1 SQLITE_NOMEM}
}


finish_test

  execsql { INSERT INTO x2(x2) VALUES('optimize') }
} -test {
  faultsim_test_result {0 {}} {1 SQLITE_NOMEM}
}


finish_test

  faultsim_test_result [list 0 {1 3}]
}


} ;# foreach_detail_mode...

finish_test

  faultsim_test_result [list 0 {1 3}]
}


} ;# foreach_detail_mode...

finish_test

  sqlite3 db test.db
} -body {
  execsql { SELECT rowid FROM o2('a+b+c NOT xyz') }
} -test {
  faultsim_test_result {0 {1 2}}
}
finish_test

  sqlite3 db test.db
} -body {
  execsql { SELECT rowid FROM o2('a+b+c NOT xyz') }
} -test {
  faultsim_test_result {0 {1 2}}
}
finish_test

  execsql { SELECT rowid FROM t1('{a b c} : (a AND d)') }
} -test {
  faultsim_test_result {0 {2 3}}
}


finish_test

  execsql { SELECT rowid FROM t1('{a b c} : (a AND d)') }
} -test {
  faultsim_test_result {0 {2 3}}
}


finish_test

      execsql { INSERT INTO x8 VALUES( rnddoc(5) ); }
    }
  } msg] $msg
} {1 {database or disk is full}}


finish_test

      execsql { INSERT INTO x8 VALUES( rnddoc(5) ); }
    }
  } msg] $msg
} {1 {database or disk is full}}


finish_test

reset_db
do_catchsql_test 4.1 {
  CREATE VIRTUAL TABLE f2 USING fts5(o, t);
  SELECT * FROM f2('(8 AND 9)`AND 10');
} {1 {fts5: syntax error near "`"}}

finish_test

reset_db
do_catchsql_test 4.1 {
  CREATE VIRTUAL TABLE f2 USING fts5(o, t);
  SELECT * FROM f2('(8 AND 9)`AND 10');
} {1 {fts5: syntax error near "`"}}

finish_test

      INSERT INTO t2 VALUES($small || ' ' || $big);
    }
  } {}

} ;# foreach_detail_mode

finish_test

      INSERT INTO t2 VALUES($small || ' ' || $big);
    }
  } {}

} ;# foreach_detail_mode

finish_test

      if {$res == [lsort -integer $res2]} { incr ok }
    }
    set ok
  } {1000}
}

finish_test

      if {$res == [lsort -integer $res2]} { incr ok }
    }
    set ok
  } {1000}
}

finish_test

do_execsql_test 1.6 {
  INSERT INTO t1(rowid, str) SELECT rowid+10, x FROM x1;
  SELECT last_insert_rowid();
} {14}


finish_test

do_execsql_test 1.6 {
  INSERT INTO t1(rowid, str) SELECT rowid+10, x FROM x1;
  SELECT last_insert_rowid();
} {14}


finish_test

} {1 1 abc 2 {} {}}

do_execsql_test 1.2 {
  SELECT * FROM t1 LEFT JOIN vt ON (vt MATCH 'abc')
} {1 abc 2 abc}

finish_test

} {1 1 abc 2 {} {}}

do_execsql_test 1.2 {
  SELECT * FROM t1 LEFT JOIN vt ON (vt MATCH 'abc')
} {1 abc 2 abc}

finish_test

} {}

do_catchsql_test 14.2 {
  SELECT matchinfo(x1, 'd') FROM x1('a b c');
} {1 {unrecognized matchinfo flag: d}}

finish_test

} {}

do_catchsql_test 14.2 {
  SELECT matchinfo(x1, 'd') FROM x1('a b c');
} {1 {unrecognized matchinfo flag: d}}

finish_test

do_execsql_test 6.3 {
  INSERT INTO g1(g1) VALUES('integrity-check');
}



finish_test

do_execsql_test 6.3 {
  INSERT INTO g1(g1) VALUES('integrity-check');
}



finish_test

do_execsql_test 1.2 {
  INSERT INTO t1(t1) VALUES('integrity-check');
}

}

finish_test

do_execsql_test 1.2 {
  INSERT INTO t1(t1) VALUES('integrity-check');
}

}

finish_test

    sql1 { INSERT INTO t1 VALUES('a b c') }
    sql3 { INSERT INTO t1(t1) VALUES('integrity-check') }
  } {}

};# do_multiclient_test
};# foreach_detail_mode
finish_test

    sql1 { INSERT INTO t1 VALUES('a b c') }
    sql3 { INSERT INTO t1(t1) VALUES('integrity-check') }
  } {}

};# do_multiclient_test
};# foreach_detail_mode
finish_test

do_near_test 1.23 "a b c d e f g h i" { NEAR(a+b+c+d i b+c, 4) } 0

do_near_test 1.24 "a b c d e f g h i" { NEAR(i a+b+c+d b+c, 5) } 1
do_near_test 1.25 "a b c d e f g h i" { NEAR(i a+b+c+d b+c, 4) } 0


finish_test

do_near_test 1.23 "a b c d e f g h i" { NEAR(a+b+c+d i b+c, 4) } 0

do_near_test 1.24 "a b c d e f g h i" { NEAR(i a+b+c+d b+c, 5) } 1
do_near_test 1.25 "a b c d e f g h i" { NEAR(i a+b+c+d b+c, 4) } 0


finish_test

    UPDATE ttt SET x = 'A B C' WHERE rowid = 4;
    INSERT INTO ttt(rowid, x) VALUES(6, 'd e f');
  COMMIT;
} {}
do_test 4.2.2 { fts5_level_segs ttt } {3}

finish_test

    UPDATE ttt SET x = 'A B C' WHERE rowid = 4;
    INSERT INTO ttt(rowid, x) VALUES(6, 'd e f');
  COMMIT;
} {}
do_test 4.2.2 { fts5_level_segs ttt } {3}

finish_test

  do_execsql_test 2.$tn.5 {
    INSERT INTO t1(t1) VALUES('integrity-check');
  }

  do_test 2.$tn.6 { fts5_segcount t1 } 1
}
finish_test

  do_execsql_test 2.$tn.5 {
    INSERT INTO t1(t1) VALUES('integrity-check');
  }

  do_test 2.$tn.6 { fts5_segcount t1 } 1
}
finish_test

  FROM t3('a:f+f')
} {
  31 {h *f f*} {i j g e c} {j j f c a i j} 
  50 {*f f* c} {f f b i i} {f f a j e c i}
}

finish_test

  FROM t3('a:f+f')
} {
  31 {h *f f*} {i j g e c} {j j f c a i j} 
  50 {*f f* c} {f f b i i} {f f a j e c i}
}

finish_test

  0 0 0 {SCAN TABLE f1 VIRTUAL TABLE INDEX 2:}
}




finish_test

  0 0 0 {SCAN TABLE f1 VIRTUAL TABLE INDEX 2:}
}




finish_test

    lindex [sqlite3_fts5_tokenize db porter $in] 0
  } $out
  incr i
}


finish_test

    lindex [sqlite3_fts5_tokenize db porter $in] 0
  } $out
  incr i
}


finish_test

    lindex [sqlite3_fts5_tokenize db porter $in] 0
  } $out
  incr i
}


finish_test

    lindex [sqlite3_fts5_tokenize db porter $in] 0
  } $out
  incr i
}


finish_test

    do_execsql_test 7.$tn {
      SELECT md5sum(id, block) FROM tt_data
    } [list $::checksum]
  }
}

finish_test

    do_execsql_test 7.$tn {
      SELECT md5sum(id, block) FROM tt_data
    } [list $::checksum]
  }
}

finish_test

    } {}
    incr ret
  }
}


finish_test

    } {}
    incr ret
  }
}


finish_test

  VTest MATCH 'wrinkle in time OR a wrinkle in time' ORDER BY rank;
} {{wrinkle in time} {Bill Smith}}




finish_test

  VTest MATCH 'wrinkle in time OR a wrinkle in time' ORDER BY rank;
} {{wrinkle in time} {Bill Smith}}




finish_test

  CREATE VIRTUAL TABLE nc USING fts5(doc, content=);
}

do_catchsql_test 2.2 {
  INSERT INTO nc(nc) VALUES('rebuild');
} {1 {'rebuild' may not be used with a contentless fts5 table}}
finish_test

  CREATE VIRTUAL TABLE nc USING fts5(doc, content=);
}

do_catchsql_test 2.2 {
  INSERT INTO nc(nc) VALUES('rebuild');
} {1 {'rebuild' may not be used with a contentless fts5 table}}
finish_test

  }
  set res
} {500 400 300}



finish_test

  }
  set res
} {500 400 300}



finish_test

} {36}

#db eval {SELECT rowid, fts5_decode_none(rowid, block) aS r FROM x5_data} {puts $r}



finish_test

} {36}

#db eval {SELECT rowid, fts5_decode_none(rowid, block) aS r FROM x5_data} {puts $r}



finish_test

do_execsql_test 17.6 { 
  SELECT * FROM t2('x:b* OR y:a*') WHERE rowid>55
}

#db eval {SELECT rowid, fts5_decode_none(rowid, block) aS r FROM t2_data} {puts $r}
  
finish_test

do_execsql_test 17.6 { 
  SELECT * FROM t2('x:b* OR y:a*') WHERE rowid>55
}

#db eval {SELECT rowid, fts5_decode_none(rowid, block) aS r FROM t2_data} {puts $r}
  
finish_test

} 
do_execsql_test 4.6 {
  SELECT * FROM t2('ab + xyz');
}


finish_test

} 
do_execsql_test 4.6 {
  SELECT * FROM t2('ab + xyz');
}


finish_test

do_execsql_test 7.1.2 {
  INSERT INTO t2(t2) VALUES('integrity-check');
}

} ;# foreach_detail_mode

finish_test

do_execsql_test 7.1.2 {
  INSERT INTO t2(t2) VALUES('integrity-check');
}

} ;# foreach_detail_mode

finish_test

}

}
}

finish_test

}

}
}

finish_test

do_catchsql_test 2.0 {
  CREATE VIRTUAL TABLE tX USING fts5tokenize(nosuchtokenizer);
} {1 {vtable constructor failed: tX}}

do_catchsql_test 2.1 {
  CREATE VIRTUAL TABLE t4 USING fts5tokenize;
  SELECT * FROM t4;
} {1 {SQL logic error or missing database}}


finish_test

do_catchsql_test 2.0 {
  CREATE VIRTUAL TABLE tX USING fts5tokenize(nosuchtokenizer);
} {1 {vtable constructor failed: tX}}

do_catchsql_test 2.1 {
  CREATE VIRTUAL TABLE t4 USING fts5tokenize;
  SELECT * FROM t4;
} {1 {SQL logic error}}


finish_test

set ::flags [list]
do_execsql_test 9.5.1 { SELECT * FROM t1('"abc xyz*"'); } {}
do_test 9.5.2 { set ::flags } {query}


finish_test

set ::flags [list]
do_execsql_test 9.5.1 { SELECT * FROM t1('"abc xyz*"'); } {}
do_test 9.5.2 { set ::flags } {query}


finish_test

  SELECT 't1' FROM t1 WHERE t1 MATCH '\xE0\xE8\xEC';
  SELECT 't2' FROM t2 WHERE t2 MATCH '\xE0\xE8\xEC';
  SELECT 't3' FROM t3 WHERE t3 MATCH '\xE0\xE8\xEC';
" {t1 t2}


finish_test

  SELECT 't1' FROM t1 WHERE t1 MATCH '\xE0\xE8\xEC';
  SELECT 't2' FROM t2 WHERE t2 MATCH '\xE0\xE8\xEC';
  SELECT 't3' FROM t3 WHERE t3 MATCH '\xE0\xE8\xEC';
" {t1 t2}


finish_test

  }
  append str {'");}
  execsql $str
} {}


finish_test

  }
  append str {'");}
  execsql $str
} {}


finish_test

  INSERT INTO t4(t4, rowid, a, b, c) VALUES('delete', 20, 'j k l', '', 'p q r');
  DELETE FROM x4 WHERE rowid=20;
  INSERT INTO t4(t4) VALUES('integrity-check');
} {}


finish_test

  INSERT INTO t4(t4, rowid, a, b, c) VALUES('delete', 20, 'j k l', '', 'p q r');
  DELETE FROM x4 WHERE rowid=20;
  INSERT INTO t4(t4) VALUES('integrity-check');
} {}


finish_test

} {}
do_execsql_test 2.2.integrity {
  INSERT INTO x2(x2) VALUES('integrity-check');
}

}
finish_test

} {}
do_execsql_test 2.2.integrity {
  INSERT INTO x2(x2) VALUES('integrity-check');
}

}
finish_test

  db close
  sqlite3 db test.db
  catchsql { SELECT * FROM t1 WHERE t1 MATCH 'a' }
} {1 {invalid fts5 file format (found 0, expected 4) - run 'rebuild'}}


finish_test

  db close
  sqlite3 db test.db
  catchsql { SELECT * FROM t1 WHERE t1 MATCH 'a' }
} {1 {invalid fts5 file format (found 0, expected 4) - run 'rebuild'}}


finish_test

# An error midway through a rename operation.
do_test rtree-7.2.1 {
  execsql { 
    CREATE TABLE t4_node(a);
  }
  catchsql { ALTER TABLE "abc 123" RENAME TO t4 }
} {1 {SQL logic error or missing database}}
do_test rtree-7.2.2 {
  execsql_intout { SELECT * FROM "abc 123" }
} {1 2 3 4 5 6 7}
do_test rtree-7.2.3 {
  execsql { 
    DROP TABLE t4_node;
    CREATE TABLE t4_rowid(a);
  }
  catchsql { ALTER TABLE "abc 123" RENAME TO t4 }
} {1 {SQL logic error or missing database}}
do_test rtree-7.2.4 {
  db close
  sqlite3 db test.db
  execsql_intout { SELECT * FROM "abc 123" }
} {1 2 3 4 5 6 7}
do_test rtree-7.2.5 {
  execsql { DROP TABLE t4_rowid }

# An error midway through a rename operation.
do_test rtree-7.2.1 {
  execsql { 
    CREATE TABLE t4_node(a);
  }
  catchsql { ALTER TABLE "abc 123" RENAME TO t4 }
} {1 {SQL logic error}}
do_test rtree-7.2.2 {
  execsql_intout { SELECT * FROM "abc 123" }
} {1 2 3 4 5 6 7}
do_test rtree-7.2.3 {
  execsql { 
    DROP TABLE t4_node;
    CREATE TABLE t4_rowid(a);
  }
  catchsql { ALTER TABLE "abc 123" RENAME TO t4 }
} {1 {SQL logic error}}
do_test rtree-7.2.4 {
  db close
  sqlite3 db test.db
  execsql_intout { SELECT * FROM "abc 123" }
} {1 2 3 4 5 6 7}
do_test rtree-7.2.5 {
  execsql { DROP TABLE t4_rowid }

#-------------------------------------------------------------------------
# Test that trying to use the MATCH operator with the r-tree module does
# not confuse it. 
#
populate_t1 10
do_catchsql_test rtree8-3.1 { 
  SELECT * FROM t1 WHERE x1 MATCH '1234'
} {1 {SQL logic error or missing database}}

#-------------------------------------------------------------------------
# Test a couple of invalid arguments to rtreedepth().
#
do_catchsql_test rtree8-4.1 {
  SELECT rtreedepth('hello world')
} {1 {Invalid argument to rtreedepth()}}

#-------------------------------------------------------------------------
# Test that trying to use the MATCH operator with the r-tree module does
# not confuse it. 
#
populate_t1 10
do_catchsql_test rtree8-3.1 { 
  SELECT * FROM t1 WHERE x1 MATCH '1234'
} {1 {SQL logic error}}

#-------------------------------------------------------------------------
# Test a couple of invalid arguments to rtreedepth().
#
do_catchsql_test rtree8-4.1 {
  SELECT rtreedepth('hello world')
} {1 {Invalid argument to rtreedepth()}}

do_execsql_test rtree9-3.3 {
  SELECT id FROM rt32 WHERE id MATCH cube(5.5, 5.5, 5.5, 1, 1, 1) ORDER BY id;
} {555 556 565 566 655 656 665 666}


do_catchsql_test rtree9-4.1 {
  SELECT id FROM rt32 WHERE id MATCH cube(5.5, 5.5, 1, 1, 1) ORDER BY id;
} {1 {SQL logic error or missing database}}
for {set x 2} {$x<200} {incr x 2} {
  do_catchsql_test rtree9-4.2.[expr $x/2] {
    SELECT id FROM rt WHERE id MATCH randomblob($x)
  } {1 {SQL logic error or missing database}}
}
do_catchsql_test rtree9-4.3 {
  SELECT id FROM rt WHERE id MATCH CAST( 
    (cube(5.5, 5.5, 5.5, 1, 1, 1) || X'1234567812345678') AS blob 
  )
} {1 {SQL logic error or missing database}}


#-------------------------------------------------------------------------
# Test the example 2d "circle" geometry callback.
#
register_circle_geom db

do_execsql_test rtree9-3.3 {
  SELECT id FROM rt32 WHERE id MATCH cube(5.5, 5.5, 5.5, 1, 1, 1) ORDER BY id;
} {555 556 565 566 655 656 665 666}


do_catchsql_test rtree9-4.1 {
  SELECT id FROM rt32 WHERE id MATCH cube(5.5, 5.5, 1, 1, 1) ORDER BY id;
} {1 {SQL logic error}}
for {set x 2} {$x<200} {incr x 2} {
  do_catchsql_test rtree9-4.2.[expr $x/2] {
    SELECT id FROM rt WHERE id MATCH randomblob($x)
  } {1 {SQL logic error}}
}
do_catchsql_test rtree9-4.3 {
  SELECT id FROM rt WHERE id MATCH CAST( 
    (cube(5.5, 5.5, 5.5, 1, 1, 1) || X'1234567812345678') AS blob 
  )
} {1 {SQL logic error}}


#-------------------------------------------------------------------------
# Test the example 2d "circle" geometry callback.
#
register_circle_geom db

  do_test 1.$tn.4 {
    list [catch { sql2 { SELECT * FROM rt } } msg] $msg
  } {1 {database is locked}}
}

finish_test

  do_test 1.$tn.4 {
    list [catch { sql2 { SELECT * FROM rt } } msg] $msg
  } {1 {database is locked}}
}

finish_test

/*
** Return a static string that describes the kind of error specified in the
** argument.
*/
const char *sqlite3ErrStr(int rc){
  static const char* const aMsg[] = {
    /* SQLITE_OK          */ "not an error",
    /* SQLITE_ERROR       */ "SQL logic error or missing database",
    /* SQLITE_INTERNAL    */ 0,
    /* SQLITE_PERM        */ "access permission denied",
    /* SQLITE_ABORT       */ "callback requested query abort",
    /* SQLITE_BUSY        */ "database is locked",
    /* SQLITE_LOCKED      */ "database table is locked",
    /* SQLITE_NOMEM       */ "out of memory",
    /* SQLITE_READONLY    */ "attempt to write a readonly database",

/*
** Return a static string that describes the kind of error specified in the
** argument.
*/
const char *sqlite3ErrStr(int rc){
  static const char* const aMsg[] = {
    /* SQLITE_OK          */ "not an error",
    /* SQLITE_ERROR       */ "SQL logic error",
    /* SQLITE_INTERNAL    */ 0,
    /* SQLITE_PERM        */ "access permission denied",
    /* SQLITE_ABORT       */ "callback requested query abort",
    /* SQLITE_BUSY        */ "database is locked",
    /* SQLITE_LOCKED      */ "database table is locked",
    /* SQLITE_NOMEM       */ "out of memory",
    /* SQLITE_READONLY    */ "attempt to write a readonly database",

**
** New error codes may be added in future versions of SQLite.
**
** See also: [extended result code definitions]
*/
#define SQLITE_OK           0   /* Successful result */
/* beginning-of-error-codes */
#define SQLITE_ERROR        1   /* SQL error or missing database */
#define SQLITE_INTERNAL     2   /* Internal logic error in SQLite */
#define SQLITE_PERM         3   /* Access permission denied */
#define SQLITE_ABORT        4   /* Callback routine requested an abort */
#define SQLITE_BUSY         5   /* The database file is locked */
#define SQLITE_LOCKED       6   /* A table in the database is locked */
#define SQLITE_NOMEM        7   /* A malloc() failed */
#define SQLITE_READONLY     8   /* Attempt to write a readonly database */

**
** New error codes may be added in future versions of SQLite.
**
** See also: [extended result code definitions]
*/
#define SQLITE_OK           0   /* Successful result */
/* beginning-of-error-codes */
#define SQLITE_ERROR        1   /* Generic error */
#define SQLITE_INTERNAL     2   /* Internal logic error in SQLite */
#define SQLITE_PERM         3   /* Access permission denied */
#define SQLITE_ABORT        4   /* Callback routine requested an abort */
#define SQLITE_BUSY         5   /* The database file is locked */
#define SQLITE_LOCKED       6   /* A table in the database is locked */
#define SQLITE_NOMEM        7   /* A malloc() failed */
#define SQLITE_READONLY     8   /* Attempt to write a readonly database */

forcedelete test.db
forcedelete test.db-journal


# Test the english language string equivalents for sqlite error codes
set code2english [list \
SQLITE_OK         {not an error} \
SQLITE_ERROR      {SQL logic error or missing database} \
SQLITE_PERM       {access permission denied} \
SQLITE_ABORT      {callback requested query abort} \
SQLITE_BUSY       {database is locked} \
SQLITE_LOCKED     {database table is locked} \
SQLITE_NOMEM      {out of memory} \
SQLITE_READONLY   {attempt to write a readonly database} \
SQLITE_INTERRUPT  {interrupted} \

forcedelete test.db
forcedelete test.db-journal


# Test the english language string equivalents for sqlite error codes
set code2english [list \
SQLITE_OK         {not an error} \
SQLITE_ERROR      {SQL logic error} \
SQLITE_PERM       {access permission denied} \
SQLITE_ABORT      {callback requested query abort} \
SQLITE_BUSY       {database is locked} \
SQLITE_LOCKED     {database table is locked} \
SQLITE_NOMEM      {out of memory} \
SQLITE_READONLY   {attempt to write a readonly database} \
SQLITE_INTERRUPT  {interrupted} \

forcedelete test.db
forcedelete test.db-journal


# Test the english language string equivalents for sqlite error codes
set code2english [list \
SQLITE_OK         {not an error} \
SQLITE_ERROR      {SQL logic error or missing database} \
SQLITE_PERM       {access permission denied} \
SQLITE_ABORT      {callback requested query abort} \
SQLITE_BUSY       {database is locked} \
SQLITE_LOCKED     {database table is locked} \
SQLITE_NOMEM      {out of memory} \
SQLITE_READONLY   {attempt to write a readonly database} \
SQLITE_INTERRUPT  {interrupted} \

forcedelete test.db
forcedelete test.db-journal


# Test the english language string equivalents for sqlite error codes
set code2english [list \
SQLITE_OK         {not an error} \
SQLITE_ERROR      {SQL logic error} \
SQLITE_PERM       {access permission denied} \
SQLITE_ABORT      {callback requested query abort} \
SQLITE_BUSY       {database is locked} \
SQLITE_LOCKED     {database table is locked} \
SQLITE_NOMEM      {out of memory} \
SQLITE_READONLY   {attempt to write a readonly database} \
SQLITE_INTERRUPT  {interrupted} \

sqlite3_blob_close $B

# EVIDENCE-OF: R-29804-27366 If offset iOffset is less than N bytes from
# the end of the BLOB, SQLITE_ERROR is returned and no data is written.
#
sqlite3_blob_open db main t2 a 44 3 B
blob_write_error_test 2.2.1 $B 31 $blob 10   \
    SQLITE_ERROR {SQL logic error or missing database}

# Make a successful write to the blob handle. This shows that the
# sqlite3_errcode() and sqlite3_errmsg() values are set even if the
# blob_write() call succeeds (see requirement in the [blob_write_error_test]
# proc).
blob_write_error_test 2.2.1 $B 30 $blob 10 SQLITE_OK {not an error}

# EVIDENCE-OF: R-58570-38916 If N or iOffset are less than zero
# SQLITE_ERROR is returned and no data is written.
#
blob_write_error_test 2.2.2 $B 31 $blob -1   \
    SQLITE_ERROR {SQL logic error or missing database}
blob_write_error_test 2.2.3 $B 20 $blob 10 SQLITE_OK {not an error}
blob_write_error_test 2.2.4 $B -1 $blob 10   \
    SQLITE_ERROR {SQL logic error or missing database}
sqlite3_blob_close $B

# EVIDENCE-OF: R-20958-54138 An attempt to write to an expired BLOB
# handle fails with an error code of SQLITE_ABORT.
#
do_test 2.3 {
  sqlite3_blob_open db main t2 a 43 0 B

sqlite3_blob_close $B

# EVIDENCE-OF: R-29804-27366 If offset iOffset is less than N bytes from
# the end of the BLOB, SQLITE_ERROR is returned and no data is written.
#
sqlite3_blob_open db main t2 a 44 3 B
blob_write_error_test 2.2.1 $B 31 $blob 10   \
    SQLITE_ERROR {SQL logic error}

# Make a successful write to the blob handle. This shows that the
# sqlite3_errcode() and sqlite3_errmsg() values are set even if the
# blob_write() call succeeds (see requirement in the [blob_write_error_test]
# proc).
blob_write_error_test 2.2.1 $B 30 $blob 10 SQLITE_OK {not an error}

# EVIDENCE-OF: R-58570-38916 If N or iOffset are less than zero
# SQLITE_ERROR is returned and no data is written.
#
blob_write_error_test 2.2.2 $B 31 $blob -1   \
    SQLITE_ERROR {SQL logic error}
blob_write_error_test 2.2.3 $B 20 $blob 10 SQLITE_OK {not an error}
blob_write_error_test 2.2.4 $B -1 $blob 10   \
    SQLITE_ERROR {SQL logic error}
sqlite3_blob_close $B

# EVIDENCE-OF: R-20958-54138 An attempt to write to an expired BLOB
# handle fails with an error code of SQLITE_ABORT.
#
do_test 2.3 {
  sqlite3_blob_open db main t2 a 43 0 B

} {53 {Home Page} {SQLite is a software...} 54 {Download SQLite} {All SQLite source code...}}

write_test 1.2.1.8 pages_content { DELETE FROM pages }
read_test  1.2.1.9 { SELECT docid, * FROM pages } {}

do_error_test fts3-1.2.1.10 {
  INSERT INTO pages(rowid, docid, title, body) VALUES(1, 2, 'A title', 'A document body');
} {SQL logic error or missing database}

# Test the optimize() function example:
ddl_test   1.2.2.1 { CREATE VIRTUAL TABLE docs USING fts3 }
write_test 1.2.2.2 docs_content {
  INSERT INTO docs VALUES('Others translate the first clause as');
}
write_test 1.2.2.3 docs_content {

} {53 {Home Page} {SQLite is a software...} 54 {Download SQLite} {All SQLite source code...}}

write_test 1.2.1.8 pages_content { DELETE FROM pages }
read_test  1.2.1.9 { SELECT docid, * FROM pages } {}

do_error_test fts3-1.2.1.10 {
  INSERT INTO pages(rowid, docid, title, body) VALUES(1, 2, 'A title', 'A document body');
} {SQL logic error}

# Test the optimize() function example:
ddl_test   1.2.2.1 { CREATE VIRTUAL TABLE docs USING fts3 }
write_test 1.2.2.2 docs_content {
  INSERT INTO docs VALUES('Others translate the first clause as');
}
write_test 1.2.2.3 docs_content {

# will propagate back up through the SQLite code base to cause the
# statement that provoked the callback to report an error, though the
# commit will have still occurred.
#
proc my_wal_hook {args} { return 1 ;# SQLITE_ERROR }
do_catchsql_test 4.1 {
  INSERT INTO t1 VALUES(7)
} {1 {SQL logic error or missing database}}

proc my_wal_hook {args} { return 5 ;# SQLITE_BUSY }
do_catchsql_test 4.2 {
  INSERT INTO t1 VALUES(8)
} {1 {database is locked}}

proc my_wal_hook {args} { return 14 ;# SQLITE_CANTOPEN }

# will propagate back up through the SQLite code base to cause the
# statement that provoked the callback to report an error, though the
# commit will have still occurred.
#
proc my_wal_hook {args} { return 1 ;# SQLITE_ERROR }
do_catchsql_test 4.1 {
  INSERT INTO t1 VALUES(7)
} {1 {SQL logic error}}

proc my_wal_hook {args} { return 5 ;# SQLITE_BUSY }
do_catchsql_test 4.2 {
  INSERT INTO t1 VALUES(8)
} {1 {database is locked}}

proc my_wal_hook {args} { return 14 ;# SQLITE_CANTOPEN }

#-------------------------------------------------------------------------
# Test error messages returned by user-defined SQL functions.
#
do_test 1.1 {
  error_messages "SELECT sql_error('custom message')"
} [list {*}{
    SQLITE_ERROR {SQL logic error or missing database} 
    SQLITE_ERROR {custom message}
}]
do_test 1.2 {
  error_messages_v2 "SELECT sql_error('custom message')"
} [list {*}{
    SQLITE_ERROR {custom message}
    SQLITE_ERROR {custom message}
................................................................................
do_execsql_test 2.1 {
  CREATE TABLE t1(a PRIMARY KEY, b UNIQUE);
  INSERT INTO t1 VALUES('abc', 'def');
}
do_test 2.2 {
  error_messages "INSERT INTO t1 VALUES('ghi', 'def')"
} [list {*}{
    SQLITE_ERROR      {SQL logic error or missing database} 
    SQLITE_CONSTRAINT {UNIQUE constraint failed: t1.b}
}]
verify_ex_errcode 2.2b SQLITE_CONSTRAINT_UNIQUE
do_test 2.3 {
  error_messages_v2 "INSERT INTO t1 VALUES('ghi', 'def')"
} [list {*}{
    SQLITE_CONSTRAINT {UNIQUE constraint failed: t1.b}
................................................................................
do_execsql_test 3.1.1 {
  CREATE TABLE t2(a PRIMARY KEY, b UNIQUE);
  INSERT INTO t2 VALUES('abc', 'def');
}
do_test 3.1.2 {
  error_messages "SELECT a FROM t2" "DROP TABLE t2"
} [list {*}{
    SQLITE_ERROR {SQL logic error or missing database} 
    SQLITE_SCHEMA {database schema has changed}
}]
do_execsql_test 3.2.1 {
  CREATE TABLE t2(a PRIMARY KEY, b UNIQUE);
  INSERT INTO t2 VALUES('abc', 'def');
}
do_test 3.2.2 {

#-------------------------------------------------------------------------
# Test error messages returned by user-defined SQL functions.
#
do_test 1.1 {
  error_messages "SELECT sql_error('custom message')"
} [list {*}{
    SQLITE_ERROR {SQL logic error} 
    SQLITE_ERROR {custom message}
}]
do_test 1.2 {
  error_messages_v2 "SELECT sql_error('custom message')"
} [list {*}{
    SQLITE_ERROR {custom message}
    SQLITE_ERROR {custom message}
................................................................................
do_execsql_test 2.1 {
  CREATE TABLE t1(a PRIMARY KEY, b UNIQUE);
  INSERT INTO t1 VALUES('abc', 'def');
}
do_test 2.2 {
  error_messages "INSERT INTO t1 VALUES('ghi', 'def')"
} [list {*}{
    SQLITE_ERROR      {SQL logic error} 
    SQLITE_CONSTRAINT {UNIQUE constraint failed: t1.b}
}]
verify_ex_errcode 2.2b SQLITE_CONSTRAINT_UNIQUE
do_test 2.3 {
  error_messages_v2 "INSERT INTO t1 VALUES('ghi', 'def')"
} [list {*}{
    SQLITE_CONSTRAINT {UNIQUE constraint failed: t1.b}
................................................................................
do_execsql_test 3.1.1 {
  CREATE TABLE t2(a PRIMARY KEY, b UNIQUE);
  INSERT INTO t2 VALUES('abc', 'def');
}
do_test 3.1.2 {
  error_messages "SELECT a FROM t2" "DROP TABLE t2"
} [list {*}{
    SQLITE_ERROR {SQL logic error} 
    SQLITE_SCHEMA {database schema has changed}
}]
do_execsql_test 3.2.1 {
  CREATE TABLE t2(a PRIMARY KEY, b UNIQUE);
  INSERT INTO t2 VALUES('abc', 'def');
}
do_test 3.2.2 {

# See what happens when renaming the fts1 table fails.
#
do_test fts1o-2.1 {
  catchsql {
    CREATE TABLE t1_term(a, b, c);
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error or missing database}}
do_test fts1o-2.2 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts1o-2.3 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_term t1_term}

................................................................................
    INSERT INTO fts_t1(a, b, c) VALUES('one two three', 'one four', 'one two');
  }
} {}
do_test fts1o-3.2 {
  catchsql {
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error or missing database}}
# NOTE(shess) rowid AS rowid to defeat caching.  Otherwise, this
# seg-faults, I suspect that there's something up with a stale
# virtual-table reference, but I'm not quite sure how it happens here
# but not for fts2o.test.
do_test fts1o-3.3 {
  execsql { SELECT rowid AS rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}

# See what happens when renaming the fts1 table fails.
#
do_test fts1o-2.1 {
  catchsql {
    CREATE TABLE t1_term(a, b, c);
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error}}
do_test fts1o-2.2 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts1o-2.3 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_term t1_term}

................................................................................
    INSERT INTO fts_t1(a, b, c) VALUES('one two three', 'one four', 'one two');
  }
} {}
do_test fts1o-3.2 {
  catchsql {
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error}}
# NOTE(shess) rowid AS rowid to defeat caching.  Otherwise, this
# seg-faults, I suspect that there's something up with a stale
# virtual-table reference, but I'm not quite sure how it happens here
# but not for fts2o.test.
do_test fts1o-3.3 {
  execsql { SELECT rowid AS rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}

do_test fts2g-1.9 {
  execsql {SELECT rowid FROM t1 WHERE t1 MATCH 'this something'}
} {}

# No support for all-except queries.
do_test fts2g-1.10 {
  catchsql {SELECT rowid FROM t1 WHERE t1 MATCH '-this -something'}
} {1 {SQL logic error or missing database}}

# Test that docListOrMerge() correctly handles reaching the end of one
# doclist before it reaches the end of the other.
do_test fts2g-1.11 {
  execsql {SELECT rowid FROM t1 WHERE t1 MATCH 'this OR also'}
} {1 2}
do_test fts2g-1.12 {

do_test fts2g-1.9 {
  execsql {SELECT rowid FROM t1 WHERE t1 MATCH 'this something'}
} {}

# No support for all-except queries.
do_test fts2g-1.10 {
  catchsql {SELECT rowid FROM t1 WHERE t1 MATCH '-this -something'}
} {1 {SQL logic error}}

# Test that docListOrMerge() correctly handles reaching the end of one
# doclist before it reaches the end of the other.
do_test fts2g-1.11 {
  execsql {SELECT rowid FROM t1 WHERE t1 MATCH 'this OR also'}
} {1 2}
do_test fts2g-1.12 {

# See what happens when renaming the fts2 table fails.
#
do_test fts2o-2.5 {
  catchsql {
    CREATE TABLE t1_segdir(a, b, c);
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error or missing database}}
do_test fts2o-2.6 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts2o-2.7 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}

................................................................................
    INSERT INTO fts_t1(a, b, c) VALUES('one two three', 'one four', 'one two');
  }
} {}
do_test fts2o-2.9 {
  catchsql {
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error or missing database}}
do_test fts2o-2.10 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts2o-2.11 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}
do_test fts2o-2.12 {

# See what happens when renaming the fts2 table fails.
#
do_test fts2o-2.5 {
  catchsql {
    CREATE TABLE t1_segdir(a, b, c);
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error}}
do_test fts2o-2.6 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts2o-2.7 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}

................................................................................
    INSERT INTO fts_t1(a, b, c) VALUES('one two three', 'one four', 'one two');
  }
} {}
do_test fts2o-2.9 {
  catchsql {
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error}}
do_test fts2o-2.10 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts2o-2.11 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}
do_test fts2o-2.12 {

# See what happens when renaming the fts3 table fails.
#
do_test fts3ao-2.5 {
  catchsql {
    CREATE TABLE t1_segdir(a, b, c);
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error or missing database}}
do_test fts3ao-2.6 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts3ao-2.7 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}

................................................................................
    INSERT INTO fts_t1(a, b, c) VALUES('one two three', 'one four', 'one two');
  }
} {}
do_test fts3ao-2.9 {
  catchsql {
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error or missing database}}
do_test fts3ao-2.10 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts3ao-2.11 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}
do_test fts3ao-2.12 {

# See what happens when renaming the fts3 table fails.
#
do_test fts3ao-2.5 {
  catchsql {
    CREATE TABLE t1_segdir(a, b, c);
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error}}
do_test fts3ao-2.6 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts3ao-2.7 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}

................................................................................
    INSERT INTO fts_t1(a, b, c) VALUES('one two three', 'one four', 'one two');
  }
} {}
do_test fts3ao-2.9 {
  catchsql {
    ALTER TABLE fts_t1 RENAME to t1;
  }
} {1 {SQL logic error}}
do_test fts3ao-2.10 {
  execsql { SELECT rowid, snippet(fts_t1) FROM fts_t1 WHERE a MATCH 'four'; }
} {1 {one three <b>four</b>}}
do_test fts3ao-2.11 {
  execsql { SELECT tbl_name FROM sqlite_master WHERE type = 'table'}
} {fts_t1 fts_t1_content fts_t1_segments fts_t1_segdir t1_segdir}
do_test fts3ao-2.12 {

} {1 {invalid arguments to fts4aux constructor}}

do_execsql_test 3.2.1 {
  CREATE VIRTUAL TABLE terms3 USING fts4aux(does_not_exist)
}
do_catchsql_test 3.2.2 {
  SELECT * FROM terms3
} {1 {SQL logic error or missing database}}
do_catchsql_test 3.2.3 {
  SELECT * FROM terms3 WHERE term = 'abc'
} {1 {SQL logic error or missing database}}

do_catchsql_test 3.3.1 {
  INSERT INTO terms VALUES(1,2,3);
} {1 {table terms may not be modified}}
do_catchsql_test 3.3.2 {
  DELETE FROM terms
} {1 {table terms may not be modified}}
................................................................................
do_test 8.1 {
  catchsql { CREATE VIRTUAL TABLE att.aux3 USING fts4aux(main, ft1) }
} {1 {invalid arguments to fts4aux constructor}}

do_test 8.2 {
  execsql {DETACH att}
  catchsql { SELECT * FROM aux2 }
} {1 {SQL logic error or missing database}}

finish_test

} {1 {invalid arguments to fts4aux constructor}}

do_execsql_test 3.2.1 {
  CREATE VIRTUAL TABLE terms3 USING fts4aux(does_not_exist)
}
do_catchsql_test 3.2.2 {
  SELECT * FROM terms3
} {1 {SQL logic error}}
do_catchsql_test 3.2.3 {
  SELECT * FROM terms3 WHERE term = 'abc'
} {1 {SQL logic error}}

do_catchsql_test 3.3.1 {
  INSERT INTO terms VALUES(1,2,3);
} {1 {table terms may not be modified}}
do_catchsql_test 3.3.2 {
  DELETE FROM terms
} {1 {table terms may not be modified}}
................................................................................
do_test 8.1 {
  catchsql { CREATE VIRTUAL TABLE att.aux3 USING fts4aux(main, ft1) }
} {1 {invalid arguments to fts4aux constructor}}

do_test 8.2 {
  execsql {DETACH att}
  catchsql { SELECT * FROM aux2 }
} {1 {SQL logic error}}

finish_test

# If an insert tries to set both docid and rowid, require an error.
do_test fts3b-4.8 {
  catchsql {
    INSERT INTO t4 (rowid, docid, c) VALUES (14, 15, 'bad test');
    SELECT * FROM t4 WHERE docid = 14;
  }
} {1 {SQL logic error or missing database}}

do_test fts3b-4.9 {
  execsql { SELECT docid FROM t4 WHERE t4 MATCH 'testing' }
} {12}
do_test fts3b-4.10 {
  execsql { 
    UPDATE t4 SET docid = 14 WHERE docid = 12;

# If an insert tries to set both docid and rowid, require an error.
do_test fts3b-4.8 {
  catchsql {
    INSERT INTO t4 (rowid, docid, c) VALUES (14, 15, 'bad test');
    SELECT * FROM t4 WHERE docid = 14;
  }
} {1 {SQL logic error}}

do_test fts3b-4.9 {
  execsql { SELECT docid FROM t4 WHERE t4 MATCH 'testing' }
} {12}
do_test fts3b-4.10 {
  execsql { 
    UPDATE t4 SET docid = 14 WHERE docid = 12;

do_test fts3cov-2.2 {
  set root [db one {SELECT root FROM t1_segdir}]
  read_fts3varint [string range $root 1 end] left_child
  execsql { DELETE FROM t1_segments WHERE blockid = $left_child }
} {}
do_error_test fts3cov-2.3 {
  SELECT * FROM t1 WHERE t1 MATCH 'c*'
} {SQL logic error or missing database}

# Test the "replaced with NULL" case:
do_test fts3cov-2.4 {
  execsql { INSERT INTO t1_segments VALUES($left_child, NULL) }
} {}
do_error_test fts3cov-2.5 {
  SELECT * FROM t1 WHERE t1 MATCH 'cloud'
} {SQL logic error or missing database}

#--------------------------------------------------------------------------
# The following tests are to test the effects of OOM errors while storing
# terms in the pending-hash table. Specifically, while creating doclist
# blobs to store in the table. More specifically, to test OOM errors while
# appending column numbers to doclists. For example, if a doclist consists
# of:
................................................................................
#
set DO_MALLOC_TEST 0
do_test fts3cov-9.1 {
  execsql { CREATE VIRTUAL TABLE xx USING fts3 }
} {}
do_error_test fts3cov-9.2 {
  INSERT INTO xx(xx) VALUES('optimise');   -- British spelling
} {SQL logic error or missing database}
do_error_test fts3cov-9.3 {
  INSERT INTO xx(xx) VALUES('short');
} {SQL logic error or missing database}
do_error_test fts3cov-9.4 {
  INSERT INTO xx(xx) VALUES('waytoolongtobecorrect');
} {SQL logic error or missing database}
do_test fts3cov-9.5 {
  execsql { INSERT INTO xx(xx) VALUES('optimize') }
} {}

#-------------------------------------------------------------------------
# Test that a table can be optimized in the middle of a transaction when
# the pending-terms table is non-empty. This case involves some extra

do_test fts3cov-2.2 {
  set root [db one {SELECT root FROM t1_segdir}]
  read_fts3varint [string range $root 1 end] left_child
  execsql { DELETE FROM t1_segments WHERE blockid = $left_child }
} {}
do_error_test fts3cov-2.3 {
  SELECT * FROM t1 WHERE t1 MATCH 'c*'
} {SQL logic error}

# Test the "replaced with NULL" case:
do_test fts3cov-2.4 {
  execsql { INSERT INTO t1_segments VALUES($left_child, NULL) }
} {}
do_error_test fts3cov-2.5 {
  SELECT * FROM t1 WHERE t1 MATCH 'cloud'
} {SQL logic error}

#--------------------------------------------------------------------------
# The following tests are to test the effects of OOM errors while storing
# terms in the pending-hash table. Specifically, while creating doclist
# blobs to store in the table. More specifically, to test OOM errors while
# appending column numbers to doclists. For example, if a doclist consists
# of:
................................................................................
#
set DO_MALLOC_TEST 0
do_test fts3cov-9.1 {
  execsql { CREATE VIRTUAL TABLE xx USING fts3 }
} {}
do_error_test fts3cov-9.2 {
  INSERT INTO xx(xx) VALUES('optimise');   -- British spelling
} {SQL logic error}
do_error_test fts3cov-9.3 {
  INSERT INTO xx(xx) VALUES('short');
} {SQL logic error}
do_error_test fts3cov-9.4 {
  INSERT INTO xx(xx) VALUES('waytoolongtobecorrect');
} {SQL logic error}
do_test fts3cov-9.5 {
  execsql { INSERT INTO xx(xx) VALUES('optimize') }
} {}

#-------------------------------------------------------------------------
# Test that a table can be optimized in the middle of a transaction when
# the pending-terms table is non-empty. This case involves some extra

do_faultsim_test 7.2 -prep { 
  faultsim_delete_and_reopen
} -body {
  execsql { CREATE VIRTUAL TABLE t1 USING fts4(a, b, matchinfo=fs3) }
} -test {
  faultsim_test_result {1 {unrecognized matchinfo: fs3}} \
                       {1 {vtable constructor failed: t1}} \
                       {1 {SQL logic error or missing database}}
}
do_faultsim_test 7.3 -prep { 
  faultsim_delete_and_reopen
} -body {
  execsql { CREATE VIRTUAL TABLE t1 USING fts4(a, b, matchnfo=fts3) }
} -test {
  faultsim_test_result {1 {unrecognized parameter: matchnfo=fts3}} \
                       {1 {vtable constructor failed: t1}} \
                       {1 {SQL logic error or missing database}}
}


proc mit {blob} {
  set scan(littleEndian) i*
  set scan(bigEndian) I*
  binary scan $blob $scan($::tcl_platform(byteOrder)) r

do_faultsim_test 7.2 -prep { 
  faultsim_delete_and_reopen
} -body {
  execsql { CREATE VIRTUAL TABLE t1 USING fts4(a, b, matchinfo=fs3) }
} -test {
  faultsim_test_result {1 {unrecognized matchinfo: fs3}} \
                       {1 {vtable constructor failed: t1}} \
                       {1 {SQL logic error}}
}
do_faultsim_test 7.3 -prep { 
  faultsim_delete_and_reopen
} -body {
  execsql { CREATE VIRTUAL TABLE t1 USING fts4(a, b, matchnfo=fts3) }
} -test {
  faultsim_test_result {1 {unrecognized parameter: matchnfo=fts3}} \
                       {1 {vtable constructor failed: t1}} \
                       {1 {SQL logic error}}
}


proc mit {blob} {
  set scan(littleEndian) i*
  set scan(bigEndian) I*
  binary scan $blob $scan($::tcl_platform(byteOrder)) r

  faultsim_test_result {0 50}
}

eval fts3_configure_incr_load $chunkconfig


finish_test

  faultsim_test_result {0 50}
}

eval fts3_configure_incr_load $chunkconfig


finish_test

do_catchsql_test 2.0 {
  CREATE VIRTUAL TABLE tX USING fts3tokenize(nosuchtokenizer);
} {1 {unknown tokenizer: nosuchtokenizer}}

do_catchsql_test 2.1 {
  CREATE VIRTUAL TABLE t4 USING fts3tokenize;
  SELECT * FROM t4;
} {1 {SQL logic error or missing database}}

do_catchsql_test 2.2 {
  CREATE VIRTUAL TABLE t USING fts4(tokenize=simple""); 
} {0 {}}

ifcapable fts3_unicode {
  do_catchsql_test 2.3 {
    CREATE VIRTUAL TABLE u USING fts4(tokenize=unicode61""); 
  } {1 {unknown tokenizer}}
}


finish_test

do_catchsql_test 2.0 {
  CREATE VIRTUAL TABLE tX USING fts3tokenize(nosuchtokenizer);
} {1 {unknown tokenizer: nosuchtokenizer}}

do_catchsql_test 2.1 {
  CREATE VIRTUAL TABLE t4 USING fts3tokenize;
  SELECT * FROM t4;
} {1 {SQL logic error}}

do_catchsql_test 2.2 {
  CREATE VIRTUAL TABLE t USING fts4(tokenize=simple""); 
} {0 {}}

ifcapable fts3_unicode {
  do_catchsql_test 2.3 {
    CREATE VIRTUAL TABLE u USING fts4(tokenize=unicode61""); 
  } {1 {unknown tokenizer}}
}


finish_test

} {
  {A B} {B A} {C D} {A A}
}

do_catchsql_test 6.2.2 {
  DROP TABLE t7;
  SELECT * FROM ft7;
} {1 {SQL logic error or missing database}}

db close
sqlite3 db test.db
do_execsql_test 6.2.3 {
  SELECT name FROM sqlite_master WHERE name LIKE '%t7%'
} {
  ft7 ft7_segments ft7_segdir sqlite_autoindex_ft7_segdir_1 
................................................................................

do_execsql_test 6.2.7 {
  DROP TABLE t7;
  CREATE TABLE t7(x);
}
do_catchsql_test 6.2.8 {
  SELECT * FROM ft7 WHERE ft7 MATCH '"A A"';
} {1 {SQL logic error or missing database}}
do_catchsql_test 6.2.9 {
  SELECT * FROM ft7 WHERE ft7 MATCH '"A A"';
} {1 {SQL logic error or missing database}}

db close
sqlite3 db test.db
do_catchsql_test 6.2.10 {
  SELECT rowid FROM ft7 WHERE ft7 MATCH '"A A"';
} {0 2}
do_catchsql_test 6.2.11 {
................................................................................
} {13 15}
do_execsql_test 7.2.3 {
  SELECT name FROM sqlite_master WHERE name LIKE 'ft9_%';
} {ft9_segments ft9_segdir ft9_docsize ft9_stat}

do_catchsql_test 7.2.4 {
  SELECT * FROM ft9 WHERE ft9 MATCH 'N';
} {1 {SQL logic error or missing database}}

#-------------------------------------------------------------------------
# Test cases 8.*
# 
do_execsql_test 8.1 {
  CREATE TABLE t10(a, b);
  INSERT INTO t10 VALUES(

} {
  {A B} {B A} {C D} {A A}
}

do_catchsql_test 6.2.2 {
  DROP TABLE t7;
  SELECT * FROM ft7;
} {1 {SQL logic error}}

db close
sqlite3 db test.db
do_execsql_test 6.2.3 {
  SELECT name FROM sqlite_master WHERE name LIKE '%t7%'
} {
  ft7 ft7_segments ft7_segdir sqlite_autoindex_ft7_segdir_1 
................................................................................

do_execsql_test 6.2.7 {
  DROP TABLE t7;
  CREATE TABLE t7(x);
}
do_catchsql_test 6.2.8 {
  SELECT * FROM ft7 WHERE ft7 MATCH '"A A"';
} {1 {SQL logic error}}
do_catchsql_test 6.2.9 {
  SELECT * FROM ft7 WHERE ft7 MATCH '"A A"';
} {1 {SQL logic error}}

db close
sqlite3 db test.db
do_catchsql_test 6.2.10 {
  SELECT rowid FROM ft7 WHERE ft7 MATCH '"A A"';
} {0 2}
do_catchsql_test 6.2.11 {
................................................................................
} {13 15}
do_execsql_test 7.2.3 {
  SELECT name FROM sqlite_master WHERE name LIKE 'ft9_%';
} {ft9_segments ft9_segdir ft9_docsize ft9_stat}

do_catchsql_test 7.2.4 {
  SELECT * FROM ft9 WHERE ft9 MATCH 'N';
} {1 {SQL logic error}}

#-------------------------------------------------------------------------
# Test cases 8.*
# 
do_execsql_test 8.1 {
  CREATE TABLE t10(a, b);
  INSERT INTO t10 VALUES(

for {set i 0} {$i < 50} {incr i} {
  do_execsql_test 4.1.4.$i {
    SELECT count(*) FROM t4 WHERE t4 MATCH 'fox' AND lid=$i;
  } [expr 0==($i%2)]
}
do_catchsql_test 4.1.5 {
  INSERT INTO t4(content, lid) VALUES('hello world', 101)
} {1 {SQL logic error or missing database}}

#-------------------------------------------------------------------------
# Test cases 5.*
#
# The following test cases are designed to detect a 32-bit overflow bug
# that existed at one point.
#

for {set i 0} {$i < 50} {incr i} {
  do_execsql_test 4.1.4.$i {
    SELECT count(*) FROM t4 WHERE t4 MATCH 'fox' AND lid=$i;
  } [expr 0==($i%2)]
}
do_catchsql_test 4.1.5 {
  INSERT INTO t4(content, lid) VALUES('hello world', 101)
} {1 {SQL logic error}}

#-------------------------------------------------------------------------
# Test cases 5.*
#
# The following test cases are designed to detect a 32-bit overflow bug
# that existed at one point.
#

do_execsql_test 1.6 {
  INSERT INTO t1(rowid, str) SELECT rowid+10, x FROM x1;
  SELECT last_insert_rowid();
} {14}


finish_test

do_execsql_test 1.6 {
  INSERT INTO t1(rowid, str) SELECT rowid+10, x FROM x1;
  SELECT last_insert_rowid();
} {14}


finish_test

    4   {merge=5,}
    5   {merge=6,%}
    6   {merge=6,six}
    7   {merge=6,1}
  } {
    do_catchsql_test 2.$tn { 
      INSERT INTO t2(t2) VALUES($arg);
    } {1 {SQL logic error or missing database}}
  }
  
  #-------------------------------------------------------------------------
  # Test cases 3.*
  #
  do_test 3.0 { 
    reset_db

    4   {merge=5,}
    5   {merge=6,%}
    6   {merge=6,six}
    7   {merge=6,1}
  } {
    do_catchsql_test 2.$tn { 
      INSERT INTO t2(t2) VALUES($arg);
    } {1 {SQL logic error}}
  }
  
  #-------------------------------------------------------------------------
  # Test cases 3.*
  #
  do_test 3.0 { 
    reset_db

set ::nondeter_ret 0
do_execsql_test 4.3 {
  SELECT a, sum(b) FROM t3 WHERE nondeter(a) GROUP BY a
} {1 4 2 2}


finish_test

set ::nondeter_ret 0
do_execsql_test 4.3 {
  SELECT a, sum(b) FROM t3 WHERE nondeter(a) GROUP BY a
} {1 4 2 2}


finish_test

}

do_execsql_test 2.1 {
  SELECT a+1, quote(a+1) FROM t1 ORDER BY 1;
} {2 2 3 3 4 4}

finish_test

}

do_execsql_test 2.1 {
  SELECT a+1, quote(a+1) FROM t1 ORDER BY 1;
} {2 2 3 3 4 4}

finish_test

} {}

do_faultsim_test pagerfault-14a -prep {
  faultsim_restore_and_reopen
} -body {
  if {[catch {db backup test.db2} msg]} { error [regsub {.*: } $msg {}] }
} -test {
  faultsim_test_result {0 {}} {1 {}} {1 {SQL logic error or missing database}}
}

# If TEMP_STORE is 2 or greater, then the database [db2] will be created
# as an in-memory database. This test will not work in that case, as it
# is not possible to change the page-size of an in-memory database. Even
# using the backup API.
#

} {}

do_faultsim_test pagerfault-14a -prep {
  faultsim_restore_and_reopen
} -body {
  if {[catch {db backup test.db2} msg]} { error [regsub {.*: } $msg {}] }
} -test {
  faultsim_test_result {0 {}} {1 {}} {1 {SQL logic error}}
}

# If TEMP_STORE is 2 or greater, then the database [db2] will be created
# as an in-memory database. This test will not work in that case, as it
# is not possible to change the page-size of an in-memory database. Even
# using the backup API.
#

# The SQLITE_FCNTL_PRAGMA logic, with error handling.
#
db close
testvfs tvfs
sqlite3 db test.db -vfs tvfs
do_test pragma-19.1 {
  catchsql {PRAGMA error}
} {1 {SQL logic error or missing database}}
do_test pragma-19.2 {
  catchsql {PRAGMA error='This is the error message'}
} {1 {This is the error message}}
do_test pragma-19.3 {
  catchsql {PRAGMA error='7 This is the error message'}
} {1 {This is the error message}}
do_test pragma-19.4 {

# The SQLITE_FCNTL_PRAGMA logic, with error handling.
#
db close
testvfs tvfs
sqlite3 db test.db -vfs tvfs
do_test pragma-19.1 {
  catchsql {PRAGMA error}
} {1 {SQL logic error}}
do_test pragma-19.2 {
  catchsql {PRAGMA error='This is the error message'}
} {1 {This is the error message}}
do_test pragma-19.3 {
  catchsql {PRAGMA error='7 This is the error message'}
} {1 {This is the error message}}
do_test pragma-19.4 {

    SELECT (SELECT x FROM f1 WHERE tn=1)==(SELECT x FROM f2 WHERE tn=1)
  } {1}
}



finish_test

    SELECT (SELECT x FROM f1 WHERE tn=1)==(SELECT x FROM f2 WHERE tn=1)
  } {1}
}



finish_test

} {SQLITE_DONE}
do_test 2.4 {
  B finish
  execsql { PRAGMA integrity_check } db2
} {ok}

finish_test

} {SQLITE_DONE}
do_test 2.4 {
  B finish
  execsql { PRAGMA integrity_check } db2
} {ok}

finish_test

  do_execsql_test 1.$tn.2 {
    SELECT * FROM log ORDER BY rowid;
  } $log
}

finish_test

  do_execsql_test 1.$tn.2 {
    SELECT * FROM log ORDER BY rowid;
  } $log
}

finish_test

  catch { array unset A }
  db eval { EXPLAIN UPDATE x1 SET c=c+1 WHERE b='a' } { incr A($opcode) }
  set A(NotExists)
} {1}


finish_test

  catch { array unset A }
  db eval { EXPLAIN UPDATE x1 SET c=c+1 WHERE b='a' } { incr A($opcode) }
  set A(NotExists)
} {1}


finish_test

  list $rc $msg
} {1 {library routine called out of sequence}}
do_test vtab1.10-3 {
  set ::echo_module_begin_fail r
  catchsql {
    INSERT INTO e VALUES(1, 2, 3);
  }
} {1 {SQL logic error or missing database}}
do_test vtab1.10-4 {
  catch {execsql {
    EXPLAIN SELECT * FROM e WHERE rowid = 2;
    EXPLAIN QUERY PLAN SELECT * FROM e WHERE rowid = 2 ORDER BY rowid;
  }}
} {0}

  list $rc $msg
} {1 {library routine called out of sequence}}
do_test vtab1.10-3 {
  set ::echo_module_begin_fail r
  catchsql {
    INSERT INTO e VALUES(1, 2, 3);
  }
} {1 {SQL logic error}}
do_test vtab1.10-4 {
  catch {execsql {
    EXPLAIN SELECT * FROM e WHERE rowid = 2;
    EXPLAIN QUERY PLAN SELECT * FROM e WHERE rowid = 2 ORDER BY rowid;
  }}
} {0}

# Cause an error to occur when the echo module renames its
# backing store table.
#
do_test vtab_alter-3.1 {
  execsql  { CREATE TABLE y_base(a, b, c) }
  catchsql { ALTER TABLE x RENAME TO y }
} {1 {SQL logic error or missing database}}
do_test vtab_alter-3.2 {
  execsql  { SELECT * FROM x }
} {1 2 3}

finish_test

# Cause an error to occur when the echo module renames its
# backing store table.
#
do_test vtab_alter-3.1 {
  execsql  { CREATE TABLE y_base(a, b, c) }
  catchsql { ALTER TABLE x RENAME TO y }
} {1 {SQL logic error}}
do_test vtab_alter-3.2 {
  execsql  { SELECT * FROM x }
} {1 2 3}

finish_test