SQLite

!ENDIF

# Set this non-0 to enable full warnings (-W4, etc) when compiling.
#
!IFNDEF USE_FULLWARN
USE_FULLWARN = 0
!ENDIF

# Set this non-0 to use "stdcall" calling convention for the core library
# and shell executable.
#
!IFNDEF USE_STDCALL
USE_STDCALL = 0
!ENDIF

# Set this non-0 to have the shell executable link against the core dynamic
# link library.
#
!IFNDEF DYNAMIC_SHELL
DYNAMIC_SHELL = 0
!ENDIF

# If necessary, create a list of harmless compiler warnings to disable when
# compiling the various tools.  For the SQLite source code itself, warnings,
# if any, will be disabled from within it.
#
!IFNDEF NO_WARN
!IF $(USE_FULLWARN)!=0
NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4152 -wd4189 -wd4206 -wd4210
NO_WARN = $(NO_WARN) -wd4232 -wd4244 -wd4305 -wd4306 -wd4702 -wd4706
!ENDIF

NSDKLIBPATH = $(NSDKLIBPATH:\\=\)

# C compiler and options for use in building executables that
# will run on the platform that is doing the build.
#
!IF $(USE_FULLWARN)!=0
BCC = $(NCC) -nologo -W4
!ELSE
BCC = $(NCC) -nologo -W3
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
BCC = $(BCC) -FAcs

!ENDIF

# C compiler and options for use in building executables that
# will run on the target platform.  (BCC and TCC are usually the
# same unless your are cross-compiling.)
#
!IF $(USE_FULLWARN)!=0
TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1
!ELSE
TCC = $(CC) -nologo -W3
!ENDIF

TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise
RCC = $(RC) -DSQLITE_OS_WIN=1 -I$(TOP) -I$(TOP)\src

# Check if we want to use the "stdcall" calling convention when compiling.
# This is not supported by the compilers for non-x86 platforms.  It should
# also be noted here that building any target with these "stdcall" options
# will most likely fail if the Tcl library is also required.  This is due
# to how the Tcl library functions are declared and exported (i.e. without
# an explicit calling convention, which results in "cdecl").
#
!IF $(USE_STDCALL)!=0
!IF "$(PLATFORM)"=="x86"
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
!ELSE
!IFNDEF PLATFORM
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF
!ENDIF
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF

# These are additional compiler options used for the core library.
#
!IFNDEF CORE_COMPILE_OPTS
!IF $(USE_STDCALL)!=0
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
!ELSE
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
!ENDIF
!ENDIF

# These are the additional targets that the core library should depend on
# when linking.
#
!IFNDEF CORE_LINK_DEP
!IF $(USE_STDCALL)!=0
CORE_LINK_DEP =
!ELSE
CORE_LINK_DEP = sqlite3.def
!ENDIF
!ENDIF

# These are additional linker options used for the core library.
#
!IFNDEF CORE_LINK_OPTS
!IF $(USE_STDCALL)!=0
CORE_LINK_OPTS =
!ELSE
CORE_LINK_OPTS = /DEF:sqlite3.def
!ENDIF
!ENDIF

# These are additional compiler options used for the shell executable.
#
!IFNDEF SHELL_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)
!ELSE
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)
!ENDIF
!ENDIF

# This is the core library that the shell executable should depend on.
#
!IFNDEF SHELL_CORE_DEP
!IF $(DYNAMIC_SHELL)!=0
SHELL_CORE_DEP = sqlite3.dll
!ELSE
SHELL_CORE_DEP = libsqlite3.lib
!ENDIF
!ENDIF

# This is the core library that the shell executable should link with.
#
!IFNDEF SHELL_CORE_LIB
!IF $(DYNAMIC_SHELL)!=0
SHELL_CORE_LIB = sqlite3.lib
!ELSE
SHELL_CORE_LIB = libsqlite3.lib
!ENDIF
!ENDIF

# These are additional linker options used for the shell executable.
#
!IFNDEF SHELL_LINK_OPTS
SHELL_LINK_OPTS = $(SHELL_CORE_LIB)
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
TCC = $(TCC) -FAcs
!ENDIF

!ENDIF

# If a platform was set, force the linker to target that.
# Note that the vcvars*.bat family of batch files typically
# set this for you.  Otherwise, the linker will attempt
# to deduce the binary type based on the object files.
!IFDEF PLATFORM
LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM)
LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM)
!ELSE
LTLINKOPTS = /NOLOGO
LTLIBOPTS = /NOLOGO
!ENDIF

# When compiling for use in the WinRT environment, the following
# linker option must be used to mark the executable as runnable
# only in the context of an application container.
#
!IF $(FOR_WINRT)!=0

  $(TOP)\ext\fts3\fts3_tokenize_vtab.c \
  $(TOP)\ext\fts3\fts3_unicode.c \
  $(TOP)\ext\fts3\fts3_unicode2.c \
  $(TOP)\ext\fts3\fts3_write.c \
  $(TOP)\ext\icu\sqliteicu.h \
  $(TOP)\ext\icu\icu.c \
  $(TOP)\ext\rtree\rtree.h \
  $(TOP)\ext\rtree\rtree.c \

  $(TOP)\ext\session\sqlite3session.h \
  $(TOP)\ext\session\sqlite3session.c


# Generated source code files
#
SRC5 = \

libsqlite3.lib:	$(LIBOBJ)
	$(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS)

libtclsqlite3.lib:	tclsqlite.lo libsqlite3.lib
	$(LTLIB) $(LTLIBOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCL:tcl=tclstub) $(TLIBS)

sqlite3.exe:	$(TOP)\src\shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) sqlite3.h
	$(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) $(TOP)\src\shell.c \
		/link /pdb:sqlite3sh.pdb $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)

mptester.exe:	$(TOP)\mptest\mptest.c $(SHELL_CORE_DEP) $(LIBRESOBJS) sqlite3.h
	$(LTLINK) $(SHELL_COMPILE_OPTS) $(TOP)\mptest\mptest.c \
		/link $(LTLINKOPTS) $(LTLIBPATHS) $(SHELL_LINK_OPTS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)

# This target creates a directory named "tsrc" and fills it with
# copies of all of the C source code and header files needed to
# build on the target system.  Some of the C source code and header
# files are automatically generated.  This target takes care of
# all that automatic generation.
#
.target_source:	$(SRC) $(TOP)\tool\vdbe-compress.tcl
	-rmdir /Q/S tsrc 2>NUL
	-mkdir tsrc
	for %i in ($(SRC1)) do copy /Y %i tsrc
	for %i in ($(SRC2)) do copy /Y %i tsrc
	for %i in ($(SRC3)) do copy /Y %i tsrc
	for %i in ($(SRC4)) do copy /Y %i tsrc
	for %i in ($(SRC5)) do copy /Y %i tsrc
	del /Q tsrc\sqlite.h.in tsrc\parse.y 2>NUL
	$(TCLSH_CMD) $(TOP)\tool\vdbe-compress.tcl $(OPTS) < tsrc\vdbe.c > vdbe.new
	move vdbe.new tsrc\vdbe.c
	echo > .target_source

sqlite3.c:	.target_source $(TOP)\tool\mksqlite3c.tcl
	$(TCLSH_CMD) $(TOP)\tool\mksqlite3c.tcl $(MKSQLITE3C_ARGS)
	copy tsrc\shell.c .

!ELSE
SQLITE3C = sqlite3.c
!ENDIF

# Rule to build the amalgamation
#
sqlite3.lo:	$(SQLITE3C)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C)

# Rules to build the LEMON compiler generator
#
lempar.c:	$(TOP)\src\lempar.c
	copy $(TOP)\src\lempar.c .

lemon.exe:	$(TOP)\tool\lemon.c lempar.c
	$(BCC) $(NO_WARN) -Daccess=_access \
		-Fe$@ $(TOP)\tool\lemon.c /link $(NLTLINKOPTS) $(NLTLIBPATHS)

# Rules to build individual *.lo files from generated *.c files. This
# applies to:
#
#     parse.lo
#     opcodes.lo
#
parse.lo:	parse.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c parse.c

opcodes.lo:	opcodes.c
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c opcodes.c

# Rule to build the Win32 resources object file.
#
!IF $(USE_RC)!=0
$(LIBRESOBJS):	$(TOP)\src\sqlite3.rc $(HDR)
	echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h
	for /F %%V in ('type "$(TOP)\VERSION"') do ( \
		echo #define SQLITE_RESOURCE_VERSION %%V \
			| $(NAWK) "/.*/ { gsub(/[.]/,\",\");print }" >> sqlite3rc.h \
	)
	echo #endif >> sqlite3rc.h
	$(LTRCOMPILE) -fo $(LIBRESOBJS) $(TOP)\src\sqlite3.rc
!ENDIF

# Rules to build individual *.lo files from files in the src directory.
#
alter.lo:	$(TOP)\src\alter.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\alter.c

analyze.lo:	$(TOP)\src\analyze.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\analyze.c

attach.lo:	$(TOP)\src\attach.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\attach.c

auth.lo:	$(TOP)\src\auth.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\auth.c

backup.lo:	$(TOP)\src\backup.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\backup.c

bitvec.lo:	$(TOP)\src\bitvec.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\bitvec.c

btmutex.lo:	$(TOP)\src\btmutex.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btmutex.c

btree.lo:	$(TOP)\src\btree.c $(HDR) $(TOP)\src\pager.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btree.c

build.lo:	$(TOP)\src\build.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\build.c

callback.lo:	$(TOP)\src\callback.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\callback.c

complete.lo:	$(TOP)\src\complete.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\complete.c

ctime.lo:	$(TOP)\src\ctime.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\ctime.c

date.lo:	$(TOP)\src\date.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\date.c

delete.lo:	$(TOP)\src\delete.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\delete.c

expr.lo:	$(TOP)\src\expr.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\expr.c

fault.lo:	$(TOP)\src\fault.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fault.c

fkey.lo:	$(TOP)\src\fkey.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fkey.c

func.lo:	$(TOP)\src\func.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\func.c

global.lo:	$(TOP)\src\global.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\global.c

hash.lo:	$(TOP)\src\hash.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\hash.c

insert.lo:	$(TOP)\src\insert.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\insert.c

journal.lo:	$(TOP)\src\journal.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\journal.c

legacy.lo:	$(TOP)\src\legacy.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\legacy.c

loadext.lo:	$(TOP)\src\loadext.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\loadext.c

main.lo:	$(TOP)\src\main.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\main.c

malloc.lo:	$(TOP)\src\malloc.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\malloc.c

mem0.lo:	$(TOP)\src\mem0.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem0.c

mem1.lo:	$(TOP)\src\mem1.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem1.c

mem2.lo:	$(TOP)\src\mem2.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem2.c

mem3.lo:	$(TOP)\src\mem3.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem3.c

mem5.lo:	$(TOP)\src\mem5.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem5.c

memjournal.lo:	$(TOP)\src\memjournal.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\memjournal.c

mutex.lo:	$(TOP)\src\mutex.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex.c

mutex_noop.lo:	$(TOP)\src\mutex_noop.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_noop.c

mutex_unix.lo:	$(TOP)\src\mutex_unix.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_unix.c

mutex_w32.lo:	$(TOP)\src\mutex_w32.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_w32.c

notify.lo:	$(TOP)\src\notify.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\notify.c

pager.lo:	$(TOP)\src\pager.c $(HDR) $(TOP)\src\pager.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pager.c

pcache.lo:	$(TOP)\src\pcache.c $(HDR) $(TOP)\src\pcache.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache.c

pcache1.lo:	$(TOP)\src\pcache1.c $(HDR) $(TOP)\src\pcache.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache1.c

os.lo:	$(TOP)\src\os.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os.c

os_unix.lo:	$(TOP)\src\os_unix.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_unix.c

os_win.lo:	$(TOP)\src\os_win.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_win.c

pragma.lo:	$(TOP)\src\pragma.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pragma.c

prepare.lo:	$(TOP)\src\prepare.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\prepare.c

printf.lo:	$(TOP)\src\printf.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\printf.c

random.lo:	$(TOP)\src\random.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\random.c

resolve.lo:	$(TOP)\src\resolve.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\resolve.c

rowset.lo:	$(TOP)\src\rowset.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\rowset.c

select.lo:	$(TOP)\src\select.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\select.c

status.lo:	$(TOP)\src\status.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\status.c

table.lo:	$(TOP)\src\table.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\table.c

threads.lo:	$(TOP)\src\threads.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\threads.c

tokenize.lo:	$(TOP)\src\tokenize.c keywordhash.h $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\tokenize.c

trigger.lo:	$(TOP)\src\trigger.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\trigger.c

update.lo:	$(TOP)\src\update.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\update.c

utf.lo:	$(TOP)\src\utf.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\utf.c

util.lo:	$(TOP)\src\util.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\util.c

vacuum.lo:	$(TOP)\src\vacuum.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vacuum.c

vdbe.lo:	$(TOP)\src\vdbe.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbe.c

vdbeapi.lo:	$(TOP)\src\vdbeapi.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeapi.c

vdbeaux.lo:	$(TOP)\src\vdbeaux.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeaux.c

vdbeblob.lo:	$(TOP)\src\vdbeblob.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeblob.c

vdbemem.lo:	$(TOP)\src\vdbemem.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbemem.c

vdbesort.lo:	$(TOP)\src\vdbesort.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbesort.c

vdbetrace.lo:	$(TOP)\src\vdbetrace.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbetrace.c

vtab.lo:	$(TOP)\src\vtab.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vtab.c

wal.lo:	$(TOP)\src\wal.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\wal.c

walker.lo:	$(TOP)\src\walker.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\walker.c

where.lo:	$(TOP)\src\where.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\where.c

tclsqlite.lo:	$(TOP)\src\tclsqlite.c $(HDR)
	$(LTCOMPILE) $(NO_WARN) -DUSE_TCL_STUBS=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c

tclsqlite-shell.lo:	$(TOP)\src\tclsqlite.c $(HDR)
	$(LTCOMPILE) $(NO_WARN) -DTCLSH=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c

tclsqlite3.exe:	tclsqlite-shell.lo $(SQLITE3C) $(LIBRESOBJS)
	$(LTLINK) $(SQLITE3C) /link $(LTLINKOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite-shell.lo $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

# Rules to build opcodes.c and opcodes.h
#
opcodes.c:	opcodes.h $(TOP)\mkopcodec.awk
	$(NAWK) -f $(TOP)\mkopcodec.awk opcodes.h > opcodes.c

opcodes.h:	parse.h $(TOP)\src\vdbe.c $(TOP)\mkopcodeh.awk
	type parse.h $(TOP)\src\vdbe.c | $(NAWK) -f $(TOP)\mkopcodeh.awk > opcodes.h

# Rules to build parse.c and parse.h - the outputs of lemon.
#
parse.h:	parse.c

parse.c:	$(TOP)\src\parse.y lemon.exe $(TOP)\addopcodes.awk
	del /Q parse.y parse.h parse.h.temp 2>NUL
	copy $(TOP)\src\parse.y .
	.\lemon.exe $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(OPTS) parse.y
	move parse.h parse.h.temp
	$(NAWK) -f $(TOP)\addopcodes.awk parse.h.temp > parse.h

sqlite3.h:	$(TOP)\src\sqlite.h.in $(TOP)\manifest.uuid $(TOP)\VERSION
	$(TCLSH_CMD) $(TOP)\tool\mksqlite3h.tcl $(TOP:\=/) > sqlite3.h

mkkeywordhash.exe:	$(TOP)\tool\mkkeywordhash.c
	$(BCC) $(NO_WARN) -Fe$@ $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(OPTS) \
		$(TOP)\tool\mkkeywordhash.c /link $(NLTLINKOPTS) $(NLTLIBPATHS)

keywordhash.h:	$(TOP)\tool\mkkeywordhash.c mkkeywordhash.exe
	.\mkkeywordhash.exe > keywordhash.h



# Rules to build the extension objects.
#
icu.lo:	$(TOP)\ext\icu\icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\icu\icu.c

fts2.lo:	$(TOP)\ext\fts2\fts2.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2.c

fts2_hash.lo:	$(TOP)\ext\fts2\fts2_hash.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_hash.c

fts2_icu.lo:	$(TOP)\ext\fts2\fts2_icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_icu.c

fts2_porter.lo:	$(TOP)\ext\fts2\fts2_porter.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_porter.c

fts2_tokenizer.lo:	$(TOP)\ext\fts2\fts2_tokenizer.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer.c

fts2_tokenizer1.lo:	$(TOP)\ext\fts2\fts2_tokenizer1.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer1.c

fts3.lo:	$(TOP)\ext\fts3\fts3.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3.c

fts3_aux.lo:	$(TOP)\ext\fts3\fts3_aux.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_aux.c

fts3_expr.lo:	$(TOP)\ext\fts3\fts3_expr.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_expr.c

fts3_hash.lo:	$(TOP)\ext\fts3\fts3_hash.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_hash.c

fts3_icu.lo:	$(TOP)\ext\fts3\fts3_icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_icu.c

fts3_snippet.lo:	$(TOP)\ext\fts3\fts3_snippet.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_snippet.c

fts3_porter.lo:	$(TOP)\ext\fts3\fts3_porter.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_porter.c

fts3_tokenizer.lo:	$(TOP)\ext\fts3\fts3_tokenizer.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer.c

fts3_tokenizer1.lo:	$(TOP)\ext\fts3\fts3_tokenizer1.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer1.c

fts3_tokenize_vtab.lo:	$(TOP)\ext\fts3\fts3_tokenize_vtab.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenize_vtab.c

fts3_unicode.lo:	$(TOP)\ext\fts3\fts3_unicode.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode.c

fts3_unicode2.lo:	$(TOP)\ext\fts3\fts3_unicode2.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode2.c

fts3_write.lo:	$(TOP)\ext\fts3\fts3_write.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_write.c

rtree.lo:	$(TOP)\ext\rtree\rtree.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\rtree\rtree.c

sqlite3session.lo:	$(TOP)\ext\session\sqlite3sesion.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\session\sqlite3session.c


# Rules to build the 'testfixture' application.
#
# If using the amalgamation, use sqlite3.c directly to build the test
# fixture.  Otherwise link against libsqlite3.lib.  (This distinction is
# necessary because the test fixture requires non-API symbols which are
# hidden when the library is built via the amalgamation).
#
TESTFIXTURE_FLAGS = -DTCLSH=1 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERVER=1 -DSQLITE_PRIVATE=""
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CORE $(NO_WARN)

TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2) $(SHELL_CORE_DEP)
TESTFIXTURE_SRC1 = $(TESTEXT) $(TESTSRC3) $(SQLITE3C)
!IF $(USE_AMALGAMATION)==0
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC0)
!ELSE
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC1)
!ENDIF

	copy $(SQLITE3C) + $(TOP)\src\test_stat.c + $(TOP)\src\tclsqlite.c $@
	echo static const char *tclsh_main_loop(void){ >> $@
	echo static const char *zMainloop = >> $@
	$(NAWK) -f $(TOP)\tool\tostr.awk $(TOP)\tool\spaceanal.tcl >> $@
	echo ; return zMainloop; } >> $@

sqlite3_analyzer.exe:	sqlite3_analyzer.c $(LIBRESOBJS)
	$(LTLINK) $(NO_WARN) -DBUILD_sqlite -DTCLSH=2 -I$(TCLINCDIR) sqlite3_analyzer.c \
		/link $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

testloadext.lo:	$(TOP)\src\test_loadext.c
	$(LTCOMPILE) $(NO_WARN) -c $(TOP)\src\test_loadext.c

testloadext.dll: testloadext.lo
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ testloadext.lo

showdb.exe:	$(TOP)\tool\showdb.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\tool\showdb.c $(SQLITE3C)

showstat4.exe:	$(TOP)\tool\showstat4.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\tool\showstat4.c $(SQLITE3C)

showjournal.exe:	$(TOP)\tool\showjournal.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\tool\showjournal.c $(SQLITE3C)

showwal.exe:	$(TOP)\tool\showwal.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\tool\showwal.c $(SQLITE3C)

changeset.exe:	$(TOP)\ext\session\changeset.c $(SQLITE3C)
	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\ext\session\changeset.c $(SQLITE3C)

fts3view.exe:	$(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C)

rollback-test.exe:	$(TOP)\tool\rollback-test.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\tool\rollback-test.c $(SQLITE3C)

LogEst.exe:	$(TOP)\tool\logest.c sqlite3.h
	$(LTLINK) $(NO_WARN) -Fe$@ $(TOP)\tool\LogEst.c

wordcount.exe:	$(TOP)\test\wordcount.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\test\wordcount.c $(SQLITE3C)

speedtest1.exe:	$(TOP)\test\speedtest1.c $(SQLITE3C)
	$(LTLINK) $(NO_WARN) -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\test\speedtest1.c $(SQLITE3C)

clean:
	del /Q *.exp *.lo *.ilk *.lib *.obj *.pdb 2>NUL
	del /Q *.cod *.da *.bb *.bbg gmon.out 2>NUL
	del /Q sqlite3.h opcodes.c opcodes.h 2>NUL
	del /Q lemon.* lempar.c parse.* 2>NUL
	del /Q mkkeywordhash.* keywordhash.h 2>NUL
	del /Q notasharedlib.* 2>NUL
	-rmdir /Q/S .deps 2>NUL
	-rmdir /Q/S .libs 2>NUL
	-rmdir /Q/S quota2a 2>NUL
	-rmdir /Q/S quota2b 2>NUL
	-rmdir /Q/S quota2c 2>NUL
	-rmdir /Q/S tsrc 2>NUL
	del /Q .target_source 2>NUL
	del /Q tclsqlite3.exe 2>NUL
	del /Q testloadext.dll 2>NUL
	del /Q testfixture.exe test.db 2>NUL
	del /Q LogEst.exe fts3view.exe rollback-test.exe showdb.exe 2>NUL
	del /Q changeset.exe 2>NUL
	del /Q showjournal.exe showstat4.exe showwal.exe speedtest1.exe 2>NUL
	del /Q mptester.exe wordcount.exe 2>NUL
	del /Q sqlite3.exe sqlite3.dll sqlite3.def 2>NUL
	del /Q sqlite3.c sqlite3-*.c 2>NUL
	del /Q sqlite3rc.h 2>NUL
	del /Q shell.c sqlite3ext.h 2>NUL
	del /Q sqlite3_analyzer.exe sqlite3_analyzer.c 2>NUL
	del /Q sqlite-*-output.vsix 2>NUL


# Dynamic link library section.
#
dll: sqlite3.dll

sqlite3.def: libsqlite3.lib
	echo EXPORTS > sqlite3.def
	dumpbin /all libsqlite3.lib \
		| $(NAWK) "/ 1 _?sqlite3_/ { sub(/^.* _?/,\"\");print }" \
		| sort >> sqlite3.def

sqlite3.dll: $(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP)
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

**
** If *pp does not being with a decimal digit SQLITE_ERROR is returned and
** the output value undefined. Otherwise SQLITE_OK is returned.
**
** This function is used when parsing the "prefix=" FTS4 parameter.
*/
static int fts3GobbleInt(const char **pp, int *pnOut){
  const int MAX_NPREFIX = 10000000;
  const char *p;                  /* Iterator pointer */
  int nInt = 0;                   /* Output value */

  for(p=*pp; p[0]>='0' && p[0]<='9'; p++){
    nInt = nInt * 10 + (p[0] - '0');
    if( nInt>MAX_NPREFIX ){
      nInt = 0;
      break;
    }
  }
  if( p==*pp ) return SQLITE_ERROR;
  *pnOut = nInt;
  *pp = p;
  return SQLITE_OK;
}

    for(p=zParam; *p; p++){
      if( *p==',' ) nIndex++;
    }
  }

  aIndex = sqlite3_malloc(sizeof(struct Fts3Index) * nIndex);
  *apIndex = aIndex;

  if( !aIndex ){
    return SQLITE_NOMEM;
  }

  memset(aIndex, 0, sizeof(struct Fts3Index) * nIndex);
  if( zParam ){
    const char *p = zParam;
    int i;
    for(i=1; i<nIndex; i++){
      int nPrefix = 0;
      if( fts3GobbleInt(&p, &nPrefix) ) return SQLITE_ERROR;
      assert( nPrefix>=0 );
      if( nPrefix==0 ){
        nIndex--;
        i--;
      }else{
        aIndex[i].nPrefix = nPrefix;
      }
      p++;
    }
  }

  *pnIndex = nIndex;
  return SQLITE_OK;
}

/*
** This function is called when initializing an FTS4 table that uses the
** content=xxx option. It determines the number of and names of the columns
** of the new FTS4 table.

  zName = sqlite3_value_text(argv[0]);
  nName = sqlite3_value_bytes(argv[0])+1;

  if( argc==2 ){
    void *pOld;
    int n = sqlite3_value_bytes(argv[1]);
    if( zName==0 || n!=sizeof(pPtr) ){
      sqlite3_result_error(context, "argument type mismatch", -1);
      return;
    }
    pPtr = *(void **)sqlite3_value_blob(argv[1]);
    pOld = sqlite3Fts3HashInsert(pHash, (void *)zName, nName, pPtr);
    if( pOld==pPtr ){
      sqlite3_result_error(context, "out of memory", -1);
      return;
    }
  }else{
    if( zName ){
      pPtr = sqlite3Fts3HashFind(pHash, zName, nName);
    }
    if( !pPtr ){
      char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName);
      sqlite3_result_error(context, zErr, -1);
      sqlite3_free(zErr);
      return;
    }
  }

  sqlite3_tokenizer_module *m;

  zCopy = sqlite3_mprintf("%s", zArg);
  if( !zCopy ) return SQLITE_NOMEM;
  zEnd = &zCopy[strlen(zCopy)];

  z = (char *)sqlite3Fts3NextToken(zCopy, &n);
  if( z==0 ){
    assert( n==0 );
    z = zCopy;
  }
  z[n] = '\0';
  sqlite3Fts3Dequote(z);

  m = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash,z,(int)strlen(z)+1);
  if( !m ){
    *pzErr = sqlite3_mprintf("unknown tokenizer: %s", z);
    rc = SQLITE_ERROR;

}

/*
** This is a comparison function used as a qsort() callback when sorting
** an array of pending terms by term. This occurs as part of flushing
** the contents of the pending-terms hash table to the database.
*/
static int SQLITE_CDECL fts3CompareElemByTerm(
  const void *lhs,
  const void *rhs
){
  char *z1 = fts3HashKey(*(Fts3HashElem **)lhs);
  char *z2 = fts3HashKey(*(Fts3HashElem **)rhs);
  int n1 = fts3HashKeysize(*(Fts3HashElem **)lhs);
  int n2 = fts3HashKeysize(*(Fts3HashElem **)rhs);

  int n = (n1<n2 ? n1 : n2);
  int c = memcmp(z1, z2, n);

      }else{
        printf("         idx %2d", iIdx);
      }
      sqlite3_snprintf(sizeof(rtag), rtag, "r%lld",
                       sqlite3_column_int64(pStmt,5));
      printf("  root   %9s\n", rtag);
      if( iLEnd>iStart ){
        sqlite3_int64 iLower, iPrev = 0, iX;
        if( iLEnd+1<=iEnd ){
          sqlite3_bind_int64(pStmt2, 1, iLEnd+1);
          sqlite3_bind_int64(pStmt2, 2, iEnd);
          iLower = -1;        
          while( sqlite3_step(pStmt2)==SQLITE_ROW ){
            iX = sqlite3_column_int64(pStmt2, 0);
            if( iLower<0 ){

/*
** Decode a single segment block and display the results on stdout.
*/
static void decodeSegment(
  const unsigned char *aData,   /* Content to print */
  int nData                     /* Number of bytes of content */
){
  sqlite3_int64 iChild = 0;
  sqlite3_int64 iPrefix;
  sqlite3_int64 nTerm;
  sqlite3_int64 n;
  sqlite3_int64 iDocsz;
  int iHeight;
  sqlite3_int64 i = 0;
  int cnt = 0;

  for(i=0; i<nArg; i++){
    fprintf(stderr," %s", azArg[i]);
  }
  fprintf(stderr,"\n");
  exit(1);
}

int SQLITE_CDECL main(int argc, char **argv){
  const char *zClient;
  int iClient;
  int n, i;
  int openFlags = SQLITE_OPEN_READWRITE;
  int rc;
  char *zScript;
  int taskId;

}


/*
** Exit the recursive mutex on a Btree.
*/
void sqlite3BtreeLeave(Btree *p){
  assert( sqlite3_mutex_held(p->db->mutex) );
  if( p->sharable ){
    assert( p->wantToLock>0 );
    p->wantToLock--;
    if( p->wantToLock==0 ){
      unlockBtreeMutex(p);
    }
  }

#endif
  if( pBt==0 ){
    /*
    ** The following asserts make sure that structures used by the btree are
    ** the right size.  This is to guard against size changes that result
    ** when compiling on a different architecture.
    */
    assert( sizeof(i64)==8 );
    assert( sizeof(u64)==8 );
    assert( sizeof(u32)==4 );
    assert( sizeof(u16)==2 );
    assert( sizeof(Pgno)==4 );
  
    pBt = sqlite3MallocZero( sizeof(*pBt) );
    if( pBt==0 ){
      rc = SQLITE_NOMEM;

          ** different page). Once this subsequent call to balance_nonroot() 
          ** has completed, it is safe to release the pSpace buffer used by
          ** the previous call, as the overflow cell data will have been 
          ** copied either into the body of a database page or into the new
          ** pSpace buffer passed to the latter call to balance_nonroot().
          */
          u8 *pSpace = sqlite3PageMalloc(pCur->pBt->pageSize);
          rc = balance_nonroot(pParent, iIdx, pSpace, iPage==1,
                               pCur->hints&BTREE_BULKLOAD);
          if( pFree ){
            /* If pFree is not NULL, it points to the pSpace buffer used 
            ** by a previous call to balance_nonroot(). Its contents are
            ** now stored either on real database pages or within the 
            ** new pSpace buffer, so it may be safely freed here. */
            sqlite3PageFree(pFree);
          }

  }

  pBt->btsFlags &= ~BTS_NO_WAL;
  return rc;
}

/*
** set the mask of hint flags for cursor pCsr.

*/
void sqlite3BtreeCursorHints(BtCursor *pCsr, unsigned int mask){
  assert( mask==BTREE_BULKLOAD || mask==BTREE_SEEK_EQ || mask==0 );
  pCsr->hints = mask;
}

#ifdef SQLITE_DEBUG
/*
** Return true if the cursor has a hint specified.  This routine is
** only used from within assert() statements
*/
int sqlite3BtreeCursorHasHint(BtCursor *pCsr, unsigned int mask){
  return (pCsr->hints & mask)!=0;
}
#endif

/*
** Return true if the given Btree is read-only.
*/
int sqlite3BtreeIsReadonly(Btree *p){
  return (p->pBt->btsFlags & BTS_READ_ONLY)!=0;
}

/*
** Return the size of the header added to each page by this module.
*/
int sqlite3HeaderSizeBtree(void){ return ROUND8(sizeof(MemPage)); }

#define BTREE_INCR_VACUUM         7
#define BTREE_APPLICATION_ID      8
#define BTREE_DATA_VERSION        15  /* A virtual meta-value */

/*
** Values that may be OR'd together to form the second argument of an
** sqlite3BtreeCursorHints() call.
**
** The BTREE_BULKLOAD flag is set on index cursors when the index is going
** to be filled with content that is already in sorted order.
**
** The BTREE_SEEK_EQ flag is set on cursors that will get OP_SeekGE or
** OP_SeekLE opcodes for a range search, but where the range of entries
** selected will all have the same key.  In other words, the cursor will
** be used only for equality key searches.
**
*/
#define BTREE_BULKLOAD 0x00000001  /* Used to full index in sorted order */
#define BTREE_SEEK_EQ  0x00000002  /* EQ seeks only - no range seeks */

int sqlite3BtreeCursor(
  Btree*,                              /* BTree containing table to open */
  int iTable,                          /* Index of root page */
  int wrFlag,                          /* 1 for writing.  0 for read-only */
  struct KeyInfo*,                     /* First argument to compare function */
  BtCursor *pCursor                    /* Space to write cursor structure */

struct Pager *sqlite3BtreePager(Btree*);

int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
void sqlite3BtreeIncrblobCursor(BtCursor *);
void sqlite3BtreeClearCursor(BtCursor *);
int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);
void sqlite3BtreeCursorHints(BtCursor *, unsigned int mask);
#ifdef SQLITE_DEBUG
int sqlite3BtreeCursorHasHint(BtCursor*, unsigned int mask);
#endif
int sqlite3BtreeIsReadonly(Btree *pBt);
int sqlite3HeaderSizeBtree(void);

#ifndef NDEBUG
int sqlite3BtreeCursorIsValid(BtCursor*);
#endif

            sqlite3ErrorMsg(pParse, 
                "conflicting ON CONFLICT clauses specified", 0);
          }
          if( pIdx->onError==OE_Default ){
            pIdx->onError = pIndex->onError;
          }
        }
        pRet = pIdx;
        goto exit_create_index;
      }
    }
  }

  /* Link the new Index structure to its table and to the other
  ** in-memory database structures. 

**
** If a memory allocation error occurs, that fact is recorded in pParse->db
** and the pExpr parameter is returned unchanged.
*/
Expr *sqlite3ExprAddCollateToken(
  Parse *pParse,           /* Parsing context */
  Expr *pExpr,             /* Add the "COLLATE" clause to this expression */
  const Token *pCollName,  /* Name of collating sequence */
  int dequote              /* True to dequote pCollName */
){
  if( pCollName->n>0 ){
    Expr *pNew = sqlite3ExprAlloc(pParse->db, TK_COLLATE, pCollName, dequote);
    if( pNew ){
      pNew->pLeft = pExpr;
      pNew->flags |= EP_Collate|EP_Skip;
      pExpr = pNew;
    }
  }
  return pExpr;
}
Expr *sqlite3ExprAddCollateString(Parse *pParse, Expr *pExpr, const char *zC){
  Token s;
  assert( zC!=0 );
  s.z = zC;
  s.n = sqlite3Strlen30(s.z);
  return sqlite3ExprAddCollateToken(pParse, pExpr, &s, 0);
}

/*
** Skip over any TK_COLLATE or TK_AS operators and any unlikely()
** or likelihood() function at the root of an expression.
*/
Expr *sqlite3ExprSkipCollate(Expr *pExpr){

** the height is greater than the maximum allowed expression depth,
** leave an error in pParse.
**
** Also propagate all EP_Propagate flags from the Expr.x.pList into
** Expr.flags. 
*/
void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p){
  if( pParse->nErr ) return;
  exprSetHeight(p);
  sqlite3ExprCheckHeight(pParse, p->nHeight);
}

/*
** Return the maximum height of any expression tree referenced
** by the select statement passed as an argument.

#ifdef SQLITE_OMIT_WSD
  rc = sqlite3_wsd_init(4096, 24);
  if( rc!=SQLITE_OK ){
    return rc;
  }
#endif

  /* If the following assert() fails on some obscure processor/compiler
  ** combination, the work-around is to set the correct pointer
  ** size at compile-time using -DSQLITE_PTRSIZE=n compile-time option */
  assert( SQLITE_PTRSIZE==sizeof(char*) );

  /* If SQLite is already completely initialized, then this call
  ** to sqlite3_initialize() should be a no-op.  But the initialization
  ** must be complete.  So isInit must not be set until the very end
  ** of this routine.
  */
  if( sqlite3GlobalConfig.isInit ) return SQLITE_OK;

  ** True if heap is nearly "full" where "full" is defined by the
  ** sqlite3_soft_heap_limit() setting.
  */
  int nearlyFull;
} mem0 = { 0, 0, 0, 0, 0, 0, 0, 0 };

#define mem0 GLOBAL(struct Mem0Global, mem0)

/*
** Return the memory allocator mutex. sqlite3_status() needs it.
*/
sqlite3_mutex *sqlite3MallocMutex(void){
  return mem0.mutex;
}

/*
** This routine runs when the memory allocator sees that the
** total memory allocation is about to exceed the soft heap
** limit.
*/
static void softHeapLimitEnforcer(

** Change the alarm callback
*/
static int sqlite3MemoryAlarm(
  void(*xCallback)(void *pArg, sqlite3_int64 used,int N),
  void *pArg,
  sqlite3_int64 iThreshold
){
  sqlite3_int64 nUsed;
  sqlite3_mutex_enter(mem0.mutex);
  mem0.alarmCallback = xCallback;
  mem0.alarmArg = pArg;
  mem0.alarmThreshold = iThreshold;
  nUsed = sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED);
  mem0.nearlyFull = (iThreshold>0 && iThreshold<=nUsed);
  sqlite3_mutex_leave(mem0.mutex);

static int mallocWithAlarm(int n, void **pp){
  int nFull;
  void *p;
  assert( sqlite3_mutex_held(mem0.mutex) );
  nFull = sqlite3GlobalConfig.m.xRoundup(n);
  sqlite3StatusSet(SQLITE_STATUS_MALLOC_SIZE, n);
  if( mem0.alarmCallback!=0 ){
    sqlite3_int64 nUsed = sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED);
    if( nUsed >= mem0.alarmThreshold - nFull ){
      mem0.nearlyFull = 1;
      sqlite3MallocAlarm(nFull);
    }else{
      mem0.nearlyFull = 0;
    }
  }
  p = sqlite3GlobalConfig.m.xMalloc(nFull);
#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
  if( p==0 && mem0.alarmCallback ){
    sqlite3MallocAlarm(nFull);
    p = sqlite3GlobalConfig.m.xMalloc(nFull);
  }
#endif
  if( p ){
    nFull = sqlite3MallocSize(p);
    sqlite3StatusUp(SQLITE_STATUS_MEMORY_USED, nFull);
    sqlite3StatusUp(SQLITE_STATUS_MALLOC_COUNT, 1);
  }
  *pp = p;
  return nFull;
}

/*
** Allocate memory.  This routine is like sqlite3_malloc() except that it

  sqlite3_mutex_enter(mem0.mutex);
  sqlite3StatusSet(SQLITE_STATUS_SCRATCH_SIZE, n);
  if( mem0.nScratchFree && sqlite3GlobalConfig.szScratch>=n ){
    p = mem0.pScratchFree;
    mem0.pScratchFree = mem0.pScratchFree->pNext;
    mem0.nScratchFree--;
    sqlite3StatusUp(SQLITE_STATUS_SCRATCH_USED, 1);
    sqlite3_mutex_leave(mem0.mutex);
  }else{
    sqlite3_mutex_leave(mem0.mutex);
    p = sqlite3Malloc(n);
    if( sqlite3GlobalConfig.bMemstat && p ){
      sqlite3_mutex_enter(mem0.mutex);
      sqlite3StatusUp(SQLITE_STATUS_SCRATCH_OVERFLOW, sqlite3MallocSize(p));
      sqlite3_mutex_leave(mem0.mutex);
    }
    sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH);
  }
  assert( sqlite3_mutex_notheld(mem0.mutex) );

      ScratchFreeslot *pSlot;
      pSlot = (ScratchFreeslot*)p;
      sqlite3_mutex_enter(mem0.mutex);
      pSlot->pNext = mem0.pScratchFree;
      mem0.pScratchFree = pSlot;
      mem0.nScratchFree++;
      assert( mem0.nScratchFree <= (u32)sqlite3GlobalConfig.nScratch );
      sqlite3StatusDown(SQLITE_STATUS_SCRATCH_USED, 1);
      sqlite3_mutex_leave(mem0.mutex);
    }else{
      /* Release memory back to the heap */
      assert( sqlite3MemdebugHasType(p, MEMTYPE_SCRATCH) );
      assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_SCRATCH) );
      sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
      if( sqlite3GlobalConfig.bMemstat ){
        int iSize = sqlite3MallocSize(p);
        sqlite3_mutex_enter(mem0.mutex);
        sqlite3StatusDown(SQLITE_STATUS_SCRATCH_OVERFLOW, iSize);
        sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, iSize);
        sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1);
        sqlite3GlobalConfig.m.xFree(p);
        sqlite3_mutex_leave(mem0.mutex);
      }else{
        sqlite3GlobalConfig.m.xFree(p);
      }
    }
  }

*/
int sqlite3MallocSize(void *p){
  assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
  return sqlite3GlobalConfig.m.xSize(p);
}
int sqlite3DbMallocSize(sqlite3 *db, void *p){
  if( db==0 ){
    assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
    assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
    return sqlite3MallocSize(p);
  }else{
    assert( sqlite3_mutex_held(db->mutex) );
    if( isLookaside(db, p) ){
      return db->lookaside.sz;
    }else{
      assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
      assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
      return sqlite3GlobalConfig.m.xSize(p);
    }
  }
}
sqlite3_uint64 sqlite3_msize(void *p){
  assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
  assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
  return (sqlite3_uint64)sqlite3GlobalConfig.m.xSize(p);
}

/*
** Free memory previously obtained from sqlite3Malloc().
*/
void sqlite3_free(void *p){
  if( p==0 ) return;  /* IMP: R-49053-54554 */
  assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
  assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
  if( sqlite3GlobalConfig.bMemstat ){
    sqlite3_mutex_enter(mem0.mutex);
    sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, sqlite3MallocSize(p));
    sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1);
    sqlite3GlobalConfig.m.xFree(p);
    sqlite3_mutex_leave(mem0.mutex);
  }else{
    sqlite3GlobalConfig.m.xFree(p);
  }
}

      pBuf->pNext = db->lookaside.pFree;
      db->lookaside.pFree = pBuf;
      db->lookaside.nOut--;
      return;
    }
  }
  assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
  assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
  assert( db!=0 || sqlite3MemdebugNoType(p, MEMTYPE_LOOKASIDE) );
  sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
  sqlite3_free(p);
}

/*
** Change the size of an existing memory allocation
*/
void *sqlite3Realloc(void *pOld, u64 nBytes){
  int nOld, nNew, nDiff;
  void *pNew;
  assert( sqlite3MemdebugHasType(pOld, MEMTYPE_HEAP) );
  assert( sqlite3MemdebugNoType(pOld, (u8)~MEMTYPE_HEAP) );
  if( pOld==0 ){
    return sqlite3Malloc(nBytes); /* IMP: R-04300-56712 */
  }
  if( nBytes==0 ){
    sqlite3_free(pOld); /* IMP: R-26507-47431 */
    return 0;
  }

    pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
    if( pNew==0 && mem0.alarmCallback ){
      sqlite3MallocAlarm((int)nBytes);
      pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
    }
    if( pNew ){
      nNew = sqlite3MallocSize(pNew);
      sqlite3StatusUp(SQLITE_STATUS_MEMORY_USED, nNew-nOld);
    }
    sqlite3_mutex_leave(mem0.mutex);
  }else{
    pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
  }
  assert( EIGHT_BYTE_ALIGNMENT(pNew) ); /* IMP: R-11148-40995 */
  return pNew;

      pNew = sqlite3DbMallocRaw(db, n);
      if( pNew ){
        memcpy(pNew, p, db->lookaside.sz);
        sqlite3DbFree(db, p);
      }
    }else{
      assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
      assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
      sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
      pNew = sqlite3_realloc64(p, n);
      if( !pNew ){
        db->mallocFailed = 1;
      }
      sqlite3MemdebugSetType(pNew,
            (db->lookaside.bEnabled ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP));

  struct flock lock;
  int tErrno = 0;

  assert( pFile );
  OSTRACE(("LOCK    %d %s was %s(%s,%d) pid=%d (unix)\n", pFile->h,
      azFileLock(eFileLock), azFileLock(pFile->eFileLock),
      azFileLock(pFile->pInode->eFileLock), pFile->pInode->nShared,
      osGetpid(0)));

  /* If there is already a lock of this type or more restrictive on the
  ** unixFile, do nothing. Don't use the end_lock: exit path, as
  ** unixEnterMutex() hasn't been called yet.
  */
  if( pFile->eFileLock>=eFileLock ){
    OSTRACE(("LOCK    %d %s ok (already held) (unix)\n", pFile->h,

  unixInodeInfo *pInode;
  struct flock lock;
  int rc = SQLITE_OK;

  assert( pFile );
  OSTRACE(("UNLOCK  %d %d was %d(%d,%d) pid=%d (unix)\n", pFile->h, eFileLock,
      pFile->eFileLock, pFile->pInode->eFileLock, pFile->pInode->nShared,
      osGetpid(0)));

  assert( eFileLock<=SHARED_LOCK );
  if( pFile->eFileLock<=eFileLock ){
    return SQLITE_OK;
  }
  unixEnterMutex();
  pInode = pFile->pInode;

static int dotlockUnlock(sqlite3_file *id, int eFileLock) {
  unixFile *pFile = (unixFile*)id;
  char *zLockFile = (char *)pFile->lockingContext;
  int rc;

  assert( pFile );
  OSTRACE(("UNLOCK  %d %d was %d pid=%d (dotlock)\n", pFile->h, eFileLock,
           pFile->eFileLock, osGetpid(0)));
  assert( eFileLock<=SHARED_LOCK );
  
  /* no-op if possible */
  if( pFile->eFileLock==eFileLock ){
    return SQLITE_OK;
  }

** the requested locking level, this routine is a no-op.
*/
static int flockUnlock(sqlite3_file *id, int eFileLock) {
  unixFile *pFile = (unixFile*)id;
  
  assert( pFile );
  OSTRACE(("UNLOCK  %d %d was %d pid=%d (flock)\n", pFile->h, eFileLock,
           pFile->eFileLock, osGetpid(0)));
  assert( eFileLock<=SHARED_LOCK );
  
  /* no-op if possible */
  if( pFile->eFileLock==eFileLock ){
    return SQLITE_OK;
  }
  

static int semXUnlock(sqlite3_file *id, int eFileLock) {
  unixFile *pFile = (unixFile*)id;
  sem_t *pSem = pFile->pInode->pSem;

  assert( pFile );
  assert( pSem );
  OSTRACE(("UNLOCK  %d %d was %d pid=%d (sem)\n", pFile->h, eFileLock,
           pFile->eFileLock, osGetpid(0)));
  assert( eFileLock<=SHARED_LOCK );
  
  /* no-op if possible */
  if( pFile->eFileLock==eFileLock ){
    return SQLITE_OK;
  }
  

  unixFile *pFile = (unixFile*)id;
  unixInodeInfo *pInode = pFile->pInode;
  afpLockingContext *context = (afpLockingContext *) pFile->lockingContext;
  
  assert( pFile );
  OSTRACE(("LOCK    %d %s was %s(%s,%d) pid=%d (afp)\n", pFile->h,
           azFileLock(eFileLock), azFileLock(pFile->eFileLock),
           azFileLock(pInode->eFileLock), pInode->nShared , osGetpid(0)));

  /* If there is already a lock of this type or more restrictive on the
  ** unixFile, do nothing. Don't use the afp_end_lock: exit path, as
  ** unixEnterMutex() hasn't been called yet.
  */
  if( pFile->eFileLock>=eFileLock ){
    OSTRACE(("LOCK    %d %s ok (already held) (afp)\n", pFile->h,

#ifdef SQLITE_TEST
  int h = pFile->h;
#endif

  assert( pFile );
  OSTRACE(("UNLOCK  %d %d was %d(%d,%d) pid=%d (afp)\n", pFile->h, eFileLock,
           pFile->eFileLock, pFile->pInode->eFileLock, pFile->pInode->nShared,
           osGetpid(0)));

  assert( eFileLock<=SHARED_LOCK );
  if( pFile->eFileLock<=eFileLock ){
    return SQLITE_OK;
  }
  unixEnterMutex();
  pInode = pFile->pInode;

/*
** Information and control of an open file handle.
*/
static int unixFileControl(sqlite3_file *id, int op, void *pArg){
  unixFile *pFile = (unixFile*)id;
  switch( op ){
    case SQLITE_FCNTL_WAL_BLOCK: {
      pFile->ctrlFlags |= UNIXFILE_BLOCK;
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_LOCKSTATE: {
      *(int*)pArg = pFile->eFileLock;
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_LAST_ERRNO: {
      *(int*)pArg = pFile->lastErrno;
      return SQLITE_OK;

        assert( (p->sharedMask & mask)==0 );
        p->exclMask |= mask;
      }
    }
  }
  sqlite3_mutex_leave(pShmNode->mutex);
  OSTRACE(("SHM-LOCK shmid-%d, pid-%d got %03x,%03x\n",
           p->id, osGetpid(0), p->sharedMask, p->exclMask));
  return rc;
}

/*
** Implement a memory barrier or memory fence on shared memory.  
**
** All loads and stores begun before the barrier must complete before

  );

  /* Detect a pid change and reset the PRNG.  There is a race condition
  ** here such that two or more threads all trying to open databases at
  ** the same instant might all reset the PRNG.  But multiple resets
  ** are harmless.
  */
  if( randomnessPid!=osGetpid(0) ){
    randomnessPid = osGetpid(0);
    sqlite3_randomness(0,0);
  }

  memset(p, 0, sizeof(unixFile));

  if( eType==SQLITE_OPEN_MAIN_DB ){
    UnixUnusedFd *pUnused;

  ** in the random seed.
  **
  ** When testing, initializing zBuf[] to zero is all we do.  That means
  ** that we always use the same random number sequence.  This makes the
  ** tests repeatable.
  */
  memset(zBuf, 0, nBuf);
  randomnessPid = osGetpid(0);  
#if !defined(SQLITE_TEST)
  {
    int fd, got;
    fd = robust_open("/dev/urandom", O_RDONLY, 0);
    if( fd<0 ){
      time_t t;
      time(&t);

#ifdef LOCKPROXYDIR
  len = strlcpy(lPath, LOCKPROXYDIR, maxLen);
#else
# ifdef _CS_DARWIN_USER_TEMP_DIR
  {
    if( !confstr(_CS_DARWIN_USER_TEMP_DIR, lPath, maxLen) ){
      OSTRACE(("GETLOCKPATH  failed %s errno=%d pid=%d\n",
               lPath, errno, osGetpid(0)));
      return SQLITE_IOERR_LOCK;
    }
    len = strlcat(lPath, "sqliteplocks", maxLen);    
  }
# else
  len = strlcpy(lPath, "/tmp/", maxLen);
# endif

  dbLen = (int)strlen(dbPath);
  for( i=0; i<dbLen && (i+len+7)<(int)maxLen; i++){
    char c = dbPath[i];
    lPath[i+len] = (c=='/')?'_':c;
  }
  lPath[i+len]='\0';
  strlcat(lPath, ":auto:", maxLen);
  OSTRACE(("GETLOCKPATH  proxy lock path=%s pid=%d\n", lPath, osGetpid(0)));
  return SQLITE_OK;
}

/* 
 ** Creates the lock file and any missing directories in lockPath
 */
static int proxyCreateLockPath(const char *lockPath){

         || (i-start==2 && buf[start] != '.' && buf[start+1] != '.') ){
        buf[i]='\0';
        if( osMkdir(buf, SQLITE_DEFAULT_PROXYDIR_PERMISSIONS) ){
          int err=errno;
          if( err!=EEXIST ) {
            OSTRACE(("CREATELOCKPATH  FAILED creating %s, "
                     "'%s' proxy lock path=%s pid=%d\n",
                     buf, strerror(err), lockPath, osGetpid(0)));
            return err;
          }
        }
      }
      start=i+1;
    }
    buf[i] = lockPath[i];
  }
  OSTRACE(("CREATELOCKPATH  proxy lock path=%s pid=%d\n", lockPath, osGetpid(0)));
  return 0;
}

/*
** Create a new VFS file descriptor (stored in memory obtained from
** sqlite3_malloc) and open the file named "path" in the file descriptor.
**

    int hostIdMatch = 0;
    int readLen = 0;
    int tryOldLockPath = 0;
    int forceNewLockPath = 0;
    
    OSTRACE(("TAKECONCH  %d for %s pid=%d\n", conchFile->h,
             (pCtx->lockProxyPath ? pCtx->lockProxyPath : ":auto:"),
             osGetpid(0)));

    rc = proxyGetHostID(myHostID, &pError);
    if( (rc&0xff)==SQLITE_IOERR ){
      storeLastErrno(pFile, pError);
      goto end_takeconch;
    }
    rc = proxyConchLock(pFile, myHostID, SHARED_LOCK);

  proxyLockingContext *pCtx;  /* The locking context for the proxy lock */
  unixFile *conchFile;        /* Name of the conch file */

  pCtx = (proxyLockingContext *)pFile->lockingContext;
  conchFile = pCtx->conchFile;
  OSTRACE(("RELEASECONCH  %d for %s pid=%d\n", conchFile->h,
           (pCtx->lockProxyPath ? pCtx->lockProxyPath : ":auto:"), 
           osGetpid(0)));
  if( pCtx->conchHeld>0 ){
    rc = conchFile->pMethod->xUnlock((sqlite3_file*)conchFile, NO_LOCK);
  }
  pCtx->conchHeld = 0;
  OSTRACE(("RELEASECONCH  %d %s\n", conchFile->h,
           (rc==SQLITE_OK ? "ok" : "failed")));
  return rc;

  if( !path || path[0]=='\0' || !strcmp(path, ":auto:") ){
    lockPath=NULL;
  }else{
    lockPath=(char *)path;
  }
  
  OSTRACE(("TRANSPROXY  %d for %s pid=%d\n", pFile->h,
           (lockPath ? lockPath : ":auto:"), osGetpid(0)));

  pCtx = sqlite3_malloc( sizeof(*pCtx) );
  if( pCtx==0 ){
    return SQLITE_NOMEM;
  }
  memset(pCtx, 0, sizeof(*pCtx));

/*
** This routine handles sqlite3_file_control() calls that are specific
** to proxy locking.
*/
static int proxyFileControl(sqlite3_file *id, int op, void *pArg){
  switch( op ){




    case SQLITE_FCNTL_GET_LOCKPROXYFILE: {
      unixFile *pFile = (unixFile*)id;
      if( pFile->pMethod == &proxyIoMethods ){
        proxyLockingContext *pCtx = (proxyLockingContext*)pFile->lockingContext;
        proxyTakeConch(pFile);
        if( pCtx->lockProxyPath ){
          *(const char **)pArg = pCtx->lockProxyPath;

  }else{
    spanExpr(&A, pParse, TK_VARIABLE, &X);
    sqlite3ExprAssignVarNumber(pParse, A.pExpr);
  }
  spanSet(&A, &X, &X);
}
expr(A) ::= expr(E) COLLATE ids(C). {
  A.pExpr = sqlite3ExprAddCollateToken(pParse, E.pExpr, &C, 1);
  A.zStart = E.zStart;
  A.zEnd = &C.z[C.n];
}
%ifndef SQLITE_OMIT_CAST
expr(A) ::= CAST(X) LP expr(E) AS typetoken(T) RP(Y). {
  A.pExpr = sqlite3PExpr(pParse, TK_CAST, E.pExpr, 0, &T);
  spanSet(&A,&X,&Y);

%destructor idxlist {sqlite3ExprListDelete(pParse->db, $$);}
%type idxlist_opt {ExprList*}
%destructor idxlist_opt {sqlite3ExprListDelete(pParse->db, $$);}

idxlist_opt(A) ::= .                         {A = 0;}
idxlist_opt(A) ::= LP idxlist(X) RP.         {A = X;}
idxlist(A) ::= idxlist(X) COMMA nm(Y) collate(C) sortorder(Z).  {
  Expr *p = sqlite3ExprAddCollateToken(pParse, 0, &C, 1);
  A = sqlite3ExprListAppend(pParse,X, p);
  sqlite3ExprListSetName(pParse,A,&Y,1);
  sqlite3ExprListCheckLength(pParse, A, "index");
  if( A ) A->a[A->nExpr-1].sortOrder = (u8)Z;
}
idxlist(A) ::= nm(Y) collate(C) sortorder(Z). {
  Expr *p = sqlite3ExprAddCollateToken(pParse, 0, &C, 1);
  A = sqlite3ExprListAppend(pParse,0, p);
  sqlite3ExprListSetName(pParse, A, &Y, 1);
  sqlite3ExprListCheckLength(pParse, A, "index");
  if( A ) A->a[A->nExpr-1].sortOrder = (u8)Z;
}

%type collate {Token}

**
** Multiple threads can run this routine at the same time.  Global variables
** in pcache1 need to be protected via mutex.
*/
static void *pcache1Alloc(int nByte){
  void *p = 0;
  assert( sqlite3_mutex_notheld(pcache1.grp.mutex) );

  if( nByte<=pcache1.szSlot ){
    sqlite3_mutex_enter(pcache1.mutex);
    p = (PgHdr1 *)pcache1.pFree;
    if( p ){
      pcache1.pFree = pcache1.pFree->pNext;
      pcache1.nFreeSlot--;
      pcache1.bUnderPressure = pcache1.nFreeSlot<pcache1.nReserve;
      assert( pcache1.nFreeSlot>=0 );
      sqlite3StatusSet(SQLITE_STATUS_PAGECACHE_SIZE, nByte);
      sqlite3StatusUp(SQLITE_STATUS_PAGECACHE_USED, 1);
    }
    sqlite3_mutex_leave(pcache1.mutex);
  }
  if( p==0 ){
    /* Memory is not available in the SQLITE_CONFIG_PAGECACHE pool.  Get
    ** it from sqlite3Malloc instead.
    */
    p = sqlite3Malloc(nByte);
#ifndef SQLITE_DISABLE_PAGECACHE_OVERFLOW_STATS
    if( p ){
      int sz = sqlite3MallocSize(p);
      sqlite3_mutex_enter(pcache1.mutex);
      sqlite3StatusSet(SQLITE_STATUS_PAGECACHE_SIZE, nByte);
      sqlite3StatusUp(SQLITE_STATUS_PAGECACHE_OVERFLOW, sz);
      sqlite3_mutex_leave(pcache1.mutex);
    }
#endif
    sqlite3MemdebugSetType(p, MEMTYPE_PCACHE);
  }
  return p;
}

/*
** Free an allocated buffer obtained from pcache1Alloc().
*/
static int pcache1Free(void *p){
  int nFreed = 0;
  if( p==0 ) return 0;
  if( p>=pcache1.pStart && p<pcache1.pEnd ){
    PgFreeslot *pSlot;
    sqlite3_mutex_enter(pcache1.mutex);
    sqlite3StatusDown(SQLITE_STATUS_PAGECACHE_USED, 1);
    pSlot = (PgFreeslot*)p;
    pSlot->pNext = pcache1.pFree;
    pcache1.pFree = pSlot;
    pcache1.nFreeSlot++;
    pcache1.bUnderPressure = pcache1.nFreeSlot<pcache1.nReserve;
    assert( pcache1.nFreeSlot<=pcache1.nSlot );
    sqlite3_mutex_leave(pcache1.mutex);
  }else{
    assert( sqlite3MemdebugHasType(p, MEMTYPE_PCACHE) );
    sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
    nFreed = sqlite3MallocSize(p);
#ifndef SQLITE_DISABLE_PAGECACHE_OVERFLOW_STATS
    sqlite3_mutex_enter(pcache1.mutex);
    sqlite3StatusDown(SQLITE_STATUS_PAGECACHE_OVERFLOW, nFreed);
    sqlite3_mutex_leave(pcache1.mutex);
#endif
    sqlite3_free(p);
  }
  return nFreed;
}

  sqlite3_config(SQLITE_CONFIG_PCACHE2, &defaultMethods);
}

/*
** Return the size of the header on each page of this PCACHE implementation.
*/
int sqlite3HeaderSizePcache1(void){ return ROUND8(sizeof(PgHdr1)); }

/*
** Return the global mutex used by this PCACHE implementation.  The
** sqlite3_status() routine needs access to this mutex.
*/
sqlite3_mutex *sqlite3Pcache1Mutex(void){
  return pcache1.mutex;
}

#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
/*
** This function is called to free superfluous dynamically allocated memory
** held by the pager system. Memory in use by any SQLite pager allocated
** by the current thread may be sqlite3_free()ed.
**

    pSavedWith = pParse->pWith;
    pParse->pWith = pWith;
    sqlite3WalkSelect(pWalker, bMayRecursive ? pSel->pPrior : pSel);

    for(pLeft=pSel; pLeft->pPrior; pLeft=pLeft->pPrior);
    pEList = pLeft->pEList;
    if( pCte->pCols ){
      if( pEList && pEList->nExpr!=pCte->pCols->nExpr ){
        sqlite3ErrorMsg(pParse, "table %s has %d values for %d columns",
            pCte->zName, pEList->nExpr, pCte->pCols->nExpr
        );
        pParse->pWith = pSavedWith;
        return SQLITE_ERROR;
      }
      pEList = pCte->pCols;

#if defined(INCLUDE_MSVC_H)
#include "msvc.h"
#endif

/*
** No support for loadable extensions in VxWorks.
*/
#if (defined(__RTP__) || defined(_WRS_KERNEL)) && !SQLITE_OMIT_LOAD_EXTENSION
# define SQLITE_OMIT_LOAD_EXTENSION 1
#endif

/*
** Enable large-file support for fopen() and friends on unix.
*/
#ifndef SQLITE_DISABLE_LFS

**   +  Use p->cSep as the column separator.  The default is ",".
**   +  Use p->rSep as the row separator.  The default is "\n".
**   +  Keep track of the line number in p->nLine.
**   +  Store the character that terminates the field in p->cTerm.  Store
**      EOF on end-of-file.
**   +  Report syntax errors on stderr
*/
static char *SQLITE_CDECL csv_read_one_field(ImportCtx *p){
  int c;
  int cSep = p->cColSep;
  int rSep = p->cRowSep;
  p->n = 0;
  c = fgetc(p->in);
  if( c==EOF || seenInterrupt ){
    p->cTerm = EOF;

**   +  Use p->cSep as the column separator.  The default is "\x1F".
**   +  Use p->rSep as the row separator.  The default is "\x1E".
**   +  Keep track of the row number in p->nLine.
**   +  Store the character that terminates the field in p->cTerm.  Store
**      EOF on end-of-file.
**   +  Report syntax errors on stderr
*/
static char *SQLITE_CDECL ascii_read_one_field(ImportCtx *p){
  int c;
  int cSep = p->cColSep;
  int rSep = p->cRowSep;
  p->n = 0;
  c = fgetc(p->in);
  if( c==EOF || seenInterrupt ){
    p->cTerm = EOF;

    int nCol;                   /* Number of columns in the table */
    int nByte;                  /* Number of bytes in an SQL string */
    int i, j;                   /* Loop counters */
    int needCommit;             /* True to COMMIT or ROLLBACK at end */
    int nSep;                   /* Number of bytes in p->colSeparator[] */
    char *zSql;                 /* An SQL statement */
    ImportCtx sCtx;             /* Reader context */
    char *(SQLITE_CDECL *xRead)(ImportCtx*); /* Func to read one value */
    int (SQLITE_CDECL *xCloser)(FILE*);      /* Func to close file */

    if( nArg!=3 ){
      fprintf(stderr, "Usage: .import FILE TABLE\n");
      goto meta_command_exit;
    }
    zFile = azArg[1];
    zTable = azArg[2];

                      " for import\n");
      return 1;
    }
    sCtx.zFile = zFile;
    sCtx.nLine = 1;
    if( sCtx.zFile[0]=='|' ){
#ifdef SQLITE_OMIT_POPEN
      fprintf(stderr, "Error: pipes are not supported in this OS\n");
      return 1;
#else
      sCtx.in = popen(sCtx.zFile+1, "r");
      sCtx.zFile = "<pipe>";
      xCloser = pclose;
#endif
    }else{

      fprintf(stderr, "Usage: .timer on|off\n");
      rc = 1;
    }
  }else
  
  if( c=='t' && strncmp(azArg[0], "trace", n)==0 ){
    open_db(p, 0);

    if( nArg!=2 ){
      fprintf(stderr, "Usage: .trace FILE|off\n");
      rc = 1;
      goto meta_command_exit;
    }
    output_file_close(p->traceOut);
    p->traceOut = output_file_open(azArg[1]);
#if !defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_OMIT_FLOATING_POINT)
    if( p->traceOut==0 ){
      sqlite3_trace(p->db, 0, 0);
    }else{
      sqlite3_trace(p->db, sql_trace_callback, p->traceOut);
    }

    fprintf(stderr, "%s: Error: missing argument to %s\n",
            argv[0], argv[argc-1]);
    exit(1);
  }
  return argv[i];
}

int SQLITE_CDECL main(int argc, char **argv){
  char *zErrMsg = 0;
  ShellState data;
  const char *zInitFile = 0;
  int i;
  int rc = 0;
  int warnInmemoryDb = 0;
  int readStdin = 1;

/*
** Add the ability to override 'extern'
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif

/*
** Add the ability to override 'cdecl'
*/
#ifndef SQLITE_CDECL
# define SQLITE_CDECL
#endif

/*
** These no-op macros are used in front of interfaces to mark those
** interfaces as either deprecated or experimental.  New applications
** should not use deprecated interfaces - they are supported for backwards
** compatibility only.  Application writers should be aware that
** experimental interfaces are subject to change in point releases.
**

** interpreted as a boolean, which enables or disables the collection of
** memory allocation statistics. ^(When memory allocation statistics are
** disabled, the following SQLite interfaces become non-operational:
**   <ul>
**   <li> [sqlite3_memory_used()]
**   <li> [sqlite3_memory_highwater()]
**   <li> [sqlite3_soft_heap_limit64()]
**   <li> [sqlite3_status64()]
**   </ul>)^
** ^Memory allocation statistics are enabled by default unless SQLite is
** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
** allocation statistics are disabled by default.
** </dd>
**
** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>

int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);


/*
** CAPI3REF: Error Codes And Messages
**
** ^If the most recent sqlite3_* API call associated with 
** [database connection] D failed, then the sqlite3_errcode(D) interface
** returns the numeric [result code] or [extended result code] for that
** API call.
** If the most recent API call was successful,
** then the return value from sqlite3_errcode() is undefined.
** ^The sqlite3_extended_errcode()
** interface is the same except that it always returns the 
** [extended result code] even when extended result codes are
** disabled.
**
** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
** text that describes the error, as either UTF-8 or UTF-16 respectively.
** ^(Memory to hold the error message string is managed internally.

** take care that any prior string is freed by a call to [sqlite3_free()]
** prior to assigning a new string to zErrMsg.  ^After the error message
** is delivered up to the client application, the string will be automatically
** freed by sqlite3_free() and the zErrMsg field will be zeroed.
*/
struct sqlite3_vtab {
  const sqlite3_module *pModule;  /* The module for this virtual table */
  int nRef;                       /* Number of open cursors */
  char *zErrMsg;                  /* Error message from sqlite3_mprintf() */
  /* Virtual table implementations will typically add additional fields */
};

/*
** CAPI3REF: Virtual Table Cursor Object
** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}

#define SQLITE_TESTCTRL_SORTER_MMAP             24
#define SQLITE_TESTCTRL_IMPOSTER                25
#define SQLITE_TESTCTRL_LAST                    25

/*
** CAPI3REF: SQLite Runtime Status
**
** ^These interfaces are used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks.  ^The first argument is an integer code for
** the specific parameter to measure.  ^(Recognized integer codes
** are of the form [status parameters | SQLITE_STATUS_...].)^
** ^The current value of the parameter is returned into *pCurrent.
** ^The highest recorded value is returned in *pHighwater.  ^If the
** resetFlag is true, then the highest record value is reset after
** *pHighwater is written.  ^(Some parameters do not record the highest
** value.  For those parameters
** nothing is written into *pHighwater and the resetFlag is ignored.)^
** ^(Other parameters record only the highwater mark and not the current
** value.  For these latter parameters nothing is written into *pCurrent.)^
**
** ^The sqlite3_status() and sqlite3_status64() routines return
** SQLITE_OK on success and a non-zero [error code] on failure.
**

** If either the current value or the highwater mark is too large to
** be represented by a 32-bit integer, then the values returned by



** sqlite3_status() are undefined.
**
** See also: [sqlite3_db_status()]
*/
int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
int sqlite3_status64(
  int op,
  sqlite3_int64 *pCurrent,
  sqlite3_int64 *pHighwater,
  int resetFlag
);


/*
** CAPI3REF: Status Parameters
** KEYWORDS: {status parameters}
**
** These integer constants designate various run-time status parameters

** The LogEst can be negative to indicate fractional values. 
** Examples:
**
**    0.5 -> -10           0.1 -> -33        0.0625 -> -40
*/
typedef INT16_TYPE LogEst;

/*
** Set the SQLITE_PTRSIZE macro to the number of bytes in a pointer
*/
#ifndef SQLITE_PTRSIZE
# if defined(__SIZEOF_POINTER__)
#   define SQLITE_PTRSIZE __SIZEOF_POINTER__
# elif defined(i386)     || defined(__i386__)   || defined(_M_IX86) ||    \
       defined(_M_ARM)   || defined(__arm__)    || defined(__x86)
#   define SQLITE_PTRSIZE 4
# else
#   define SQLITE_PTRSIZE 8
# endif
#endif

/*
** Macros to determine whether the machine is big or little endian,
** and whether or not that determination is run-time or compile-time.
**
** For best performance, an attempt is made to guess at the byte-order
** using C-preprocessor macros.  If that is unsuccessful, or if
** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined

    u8 orphanTrigger;           /* Last statement is orphaned TEMP trigger */
    u8 imposterTable;           /* Building an imposter table */
  } init;
  int nVdbeActive;              /* Number of VDBEs currently running */
  int nVdbeRead;                /* Number of active VDBEs that read or write */
  int nVdbeWrite;               /* Number of active VDBEs that read and write */
  int nVdbeExec;                /* Number of nested calls to VdbeExec() */
  int nVDestroy;                /* Number of active OP_VDestroy operations */
  int nExtension;               /* Number of loaded extensions */
  void **aExtension;            /* Array of shared library handles */
  void (*xTrace)(void*,const char*);        /* Trace function */
  void *pTraceArg;                          /* Argument to the trace function */
  void (*xProfile)(void*,const char*,u64);  /* Profiling function */
  void *pProfileArg;                        /* Argument to profile function */
  void *pCommitArg;                 /* Argument to xCommitCallback() */   

#define OPFLAG_ISUPDATE      0x04    /* This OP_Insert is an sql UPDATE */
#define OPFLAG_APPEND        0x08    /* This is likely to be an append */
#define OPFLAG_USESEEKRESULT 0x10    /* Try to avoid a seek in BtreeInsert() */
#define OPFLAG_ISNOOP        0x40    /* OP_Delete does pre-update-hook only */
#define OPFLAG_LENGTHARG     0x40    /* OP_Column only used for length() */
#define OPFLAG_TYPEOFARG     0x80    /* OP_Column only used for typeof() */
#define OPFLAG_BULKCSR       0x01    /* OP_Open** used to open bulk cursor */
#define OPFLAG_SEEKEQ        0x02    /* OP_Open** cursor uses EQ seek only */
#define OPFLAG_P2ISREG       0x04    /* P2 to OP_Open** is a register number */
#define OPFLAG_PERMUTE       0x01    /* OP_Compare: use the permutation */

/*
 * Each trigger present in the database schema is stored as an instance of
 * struct Trigger. 
 *
 * Pointers to instances of struct Trigger are stored in two ways.

  sqlite3_mutex_methods const *sqlite3DefaultMutex(void);
  sqlite3_mutex_methods const *sqlite3NoopMutex(void);
  sqlite3_mutex *sqlite3MutexAlloc(int);
  int sqlite3MutexInit(void);
  int sqlite3MutexEnd(void);
#endif

sqlite3_int64 sqlite3StatusValue(int);
void sqlite3StatusUp(int, int);
void sqlite3StatusDown(int, int);
void sqlite3StatusSet(int, int);

/* Access to mutexes used by sqlite3_status() */
sqlite3_mutex *sqlite3Pcache1Mutex(void);
sqlite3_mutex *sqlite3MallocMutex(void);

#ifndef SQLITE_OMIT_FLOATING_POINT
  int sqlite3IsNaN(double);
#else
# define sqlite3IsNaN(X)  0
#endif

#endif

const char *sqlite3ErrStr(int);
int sqlite3ReadSchema(Parse *pParse);
CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int);
CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int);
Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*);
Expr *sqlite3ExprSkipCollate(Expr*);
int sqlite3CheckCollSeq(Parse *, CollSeq *);
int sqlite3CheckObjectName(Parse *, const char *);
void sqlite3VdbeSetChanges(sqlite3 *, int);
int sqlite3AddInt64(i64*,i64);
int sqlite3SubInt64(i64*,i64);

#include "vdbeInt.h"

/*
** Variables in which to record status information.
*/
typedef struct sqlite3StatType sqlite3StatType;
static SQLITE_WSD struct sqlite3StatType {
#if SQLITE_PTRSIZE>4
  sqlite3_int64 nowValue[10];         /* Current value */
  sqlite3_int64 mxValue[10];          /* Maximum value */
#else
  u32 nowValue[10];                   /* Current value */
  u32 mxValue[10];                    /* Maximum value */
#endif
} sqlite3Stat = { {0,}, {0,} };

/*
** Elements of sqlite3Stat[] are protected by either the memory allocator
** mutex, or by the pcache1 mutex.  The following array determines which.
*/
static const char statMutex[] = {
  0,  /* SQLITE_STATUS_MEMORY_USED */
  1,  /* SQLITE_STATUS_PAGECACHE_USED */
  1,  /* SQLITE_STATUS_PAGECACHE_OVERFLOW */
  0,  /* SQLITE_STATUS_SCRATCH_USED */
  0,  /* SQLITE_STATUS_SCRATCH_OVERFLOW */
  0,  /* SQLITE_STATUS_MALLOC_SIZE */
  0,  /* SQLITE_STATUS_PARSER_STACK */
  1,  /* SQLITE_STATUS_PAGECACHE_SIZE */
  0,  /* SQLITE_STATUS_SCRATCH_SIZE */
  0,  /* SQLITE_STATUS_MALLOC_COUNT */
};


/* The "wsdStat" macro will resolve to the status information
** state vector.  If writable static data is unsupported on the target,
** we have to locate the state vector at run-time.  In the more common
** case where writable static data is supported, wsdStat can refer directly
** to the "sqlite3Stat" state vector declared above.
*/
#ifdef SQLITE_OMIT_WSD
# define wsdStatInit  sqlite3StatType *x = &GLOBAL(sqlite3StatType,sqlite3Stat)
# define wsdStat x[0]
#else
# define wsdStatInit
# define wsdStat sqlite3Stat
#endif

/*
** Return the current value of a status parameter.  The caller must
** be holding the appropriate mutex.
*/
sqlite3_int64 sqlite3StatusValue(int op){
  wsdStatInit;
  assert( op>=0 && op<ArraySize(wsdStat.nowValue) );
  assert( op>=0 && op<ArraySize(statMutex) );
  assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex()
                                           : sqlite3MallocMutex()) );
  return wsdStat.nowValue[op];
}

/*
** Add N to the value of a status record.  The caller must hold the
** appropriate mutex.  (Locking is checked by assert()).
**
** The StatusUp() routine can accept positive or negative values for N.
** The value of N is added to the current status value and the high-water
** mark is adjusted if necessary.
**
** The StatusDown() routine lowers the current value by N.  The highwater
** mark is unchanged.  N must be non-negative for StatusDown().
*/
void sqlite3StatusUp(int op, int N){
  wsdStatInit;
  assert( op>=0 && op<ArraySize(wsdStat.nowValue) );
  assert( op>=0 && op<ArraySize(statMutex) );
  assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex()
                                           : sqlite3MallocMutex()) );
  wsdStat.nowValue[op] += N;
  if( wsdStat.nowValue[op]>wsdStat.mxValue[op] ){
    wsdStat.mxValue[op] = wsdStat.nowValue[op];
  }
}
void sqlite3StatusDown(int op, int N){
  wsdStatInit;
  assert( N>=0 );
  assert( op>=0 && op<ArraySize(statMutex) );
  assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex()
                                           : sqlite3MallocMutex()) );
  assert( op>=0 && op<ArraySize(wsdStat.nowValue) );
  wsdStat.nowValue[op] -= N;
}

/*
** Set the value of a status to X.  The highwater mark is adjusted if
** necessary.  The caller must hold the appropriate mutex.
*/
void sqlite3StatusSet(int op, int X){
  wsdStatInit;
  assert( op>=0 && op<ArraySize(wsdStat.nowValue) );
  assert( op>=0 && op<ArraySize(statMutex) );
  assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex()
                                           : sqlite3MallocMutex()) );
  wsdStat.nowValue[op] = X;
  if( wsdStat.nowValue[op]>wsdStat.mxValue[op] ){
    wsdStat.mxValue[op] = wsdStat.nowValue[op];
  }
}

/*
** Query status information.




*/
int sqlite3_status64(
  int op,
  sqlite3_int64 *pCurrent,
  sqlite3_int64 *pHighwater,
  int resetFlag
){
  sqlite3_mutex *pMutex;
  wsdStatInit;
  if( op<0 || op>=ArraySize(wsdStat.nowValue) ){
    return SQLITE_MISUSE_BKPT;
  }
#ifdef SQLITE_ENABLE_API_ARMOR
  if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT;
#endif
  pMutex = statMutex[op] ? sqlite3Pcache1Mutex() : sqlite3MallocMutex();
  sqlite3_mutex_enter(pMutex);
  *pCurrent = wsdStat.nowValue[op];
  *pHighwater = wsdStat.mxValue[op];
  if( resetFlag ){
    wsdStat.mxValue[op] = wsdStat.nowValue[op];
  }
  sqlite3_mutex_leave(pMutex);
  (void)pMutex;  /* Prevent warning when SQLITE_THREADSAFE=0 */
  return SQLITE_OK;
}
int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
  sqlite3_int64 iCur, iHwtr;
  int rc;
#ifdef SQLITE_ENABLE_API_ARMOR
  if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT;
#endif
  rc = sqlite3_status64(op, &iCur, &iHwtr, resetFlag);
  if( rc==0 ){
    *pCurrent = (int)iCur;
    *pHighwater = (int)iHwtr;
  }
  return rc;
}

/*
** Query status information for a single database connection
*/
int sqlite3_db_status(
  sqlite3 *db,          /* The database connection whose status is desired */

    if( lastTokenParsed!=TK_SEMI ){
      sqlite3Parser(pEngine, TK_SEMI, pParse->sLastToken, pParse);
      pParse->zTail = &zSql[i];
    }
    sqlite3Parser(pEngine, 0, pParse->sLastToken, pParse);
  }
#ifdef YYTRACKMAXSTACKDEPTH
  sqlite3_mutex_enter(sqlite3MallocMutex());
  sqlite3StatusSet(SQLITE_STATUS_PARSER_STACK,
      sqlite3ParserStackPeak(pEngine)
  );
  sqlite3_mutex_leave(sqlite3MallocMutex());
#endif /* YYDEBUG */
  sqlite3ParserFree(pEngine, sqlite3_free);
  db->lookaside.bEnabled = enableLookaside;
  if( db->mallocFailed ){
    pParse->rc = SQLITE_NOMEM;
  }
  if( pParse->rc!=SQLITE_OK && pParse->rc!=SQLITE_DONE && pParse->zErrMsg==0 ){

** This instruction works just like OpenRead except that it opens the cursor
** in read/write mode.  For a given table, there can be one or more read-only
** cursors or a single read/write cursor but not both.
**
** See also OpenRead.
*/
case OP_ReopenIdx: {














  int nField;
  KeyInfo *pKeyInfo;
  int p2;
  int iDb;
  int wrFlag;
  Btree *pX;
  VdbeCursor *pCur;
  Db *pDb;

  assert( pOp->p5==0 || pOp->p5==OPFLAG_SEEKEQ );
  assert( pOp->p4type==P4_KEYINFO );
  pCur = p->apCsr[pOp->p1];
  if( pCur && pCur->pgnoRoot==(u32)pOp->p2 ){
    assert( pCur->iDb==pOp->p3 );      /* Guaranteed by the code generator */
    goto open_cursor_set_hints;
  }
  /* If the cursor is not currently open or is open on a different
  ** index, then fall through into OP_OpenRead to force a reopen */
case OP_OpenRead:
case OP_OpenWrite:

  assert( (pOp->p5&(OPFLAG_P2ISREG|OPFLAG_BULKCSR|OPFLAG_SEEKEQ))==pOp->p5 );
  assert( pOp->opcode==OP_OpenWrite || pOp->p5==0 || pOp->p5==OPFLAG_SEEKEQ );
  assert( p->bIsReader );
  assert( pOp->opcode==OP_OpenRead || pOp->opcode==OP_ReopenIdx
          || p->readOnly==0 );

  if( p->expired ){
    rc = SQLITE_ABORT_ROLLBACK;
    break;

  pCur = allocateCursor(p, pOp->p1, nField, iDb, 1);
  if( pCur==0 ) goto no_mem;
  pCur->nullRow = 1;
  pCur->isOrdered = 1;
  pCur->pgnoRoot = p2;
  rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->pCursor);
  pCur->pKeyInfo = pKeyInfo;



  /* Set the VdbeCursor.isTable variable. Previous versions of
  ** SQLite used to check if the root-page flags were sane at this point
  ** and report database corruption if they were not, but this check has
  ** since moved into the btree layer.  */  
  pCur->isTable = pOp->p4type!=P4_KEYINFO;

open_cursor_set_hints:
  assert( OPFLAG_BULKCSR==BTREE_BULKLOAD );
  assert( OPFLAG_SEEKEQ==BTREE_SEEK_EQ );
  sqlite3BtreeCursorHints(pCur->pCursor,
                          (pOp->p5 & (OPFLAG_BULKCSR|OPFLAG_SEEKEQ)));
  break;
}

/* Opcode: OpenEphemeral P1 P2 * P4 P5
** Synopsis: nColumn=P2
**
** Open a new cursor P1 to a transient table.

  assert( pC->isOrdered );
  assert( pC->pCursor!=0 );
  oc = pOp->opcode;
  pC->nullRow = 0;
#ifdef SQLITE_DEBUG
  pC->seekOp = pOp->opcode;
#endif

  /* For a cursor with the BTREE_SEEK_EQ hint, only the OP_SeekGE and
  ** OP_SeekLE opcodes are allowed, and these must be immediately followed
  ** by an OP_IdxGT or OP_IdxLT opcode, respectively, with the same key.
  */
#ifdef SQLITE_DEBUG
  if( sqlite3BtreeCursorHasHint(pC->pCursor, BTREE_SEEK_EQ) ){
    assert( pOp->opcode==OP_SeekGE || pOp->opcode==OP_SeekLE );
    assert( pOp[1].opcode==OP_IdxLT || pOp[1].opcode==OP_IdxGT );
    assert( pOp[1].p1==pOp[0].p1 );
    assert( pOp[1].p2==pOp[0].p2 );
    assert( pOp[1].p3==pOp[0].p3 );
    assert( pOp[1].p4.i==pOp[0].p4.i );
  }
#endif
 
  if( pC->isTable ){
    /* The input value in P3 might be of any type: integer, real, string,
    ** blob, or NULL.  But it needs to be an integer before we can do
    ** the seek, so convert it. */
    pIn3 = &aMem[pOp->p3];
    if( (pIn3->flags & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
      applyNumericAffinity(pIn3, 0);

** the last one in the database) then a zero is stored in register P2.
** If AUTOVACUUM is disabled then a zero is stored in register P2.
**
** See also: Clear
*/
case OP_Destroy: {     /* out2-prerelease */
  int iMoved;


  int iDb;

  assert( p->readOnly==0 );












  pOut->flags = MEM_Null;
  if( db->nVdbeRead > db->nVDestroy+1 ){
    rc = SQLITE_LOCKED;
    p->errorAction = OE_Abort;
  }else{
    iDb = pOp->p3;

    assert( DbMaskTest(p->btreeMask, iDb) );
    iMoved = 0;  /* Not needed.  Only to silence a warning. */
    rc = sqlite3BtreeDropTable(db->aDb[iDb].pBt, pOp->p1, &iMoved);
    pOut->flags = MEM_Int;
    pOut->u.i = iMoved;
#ifndef SQLITE_OMIT_AUTOVACUUM
    if( rc==SQLITE_OK && iMoved!=0 ){

  rc = sqlite3VtabBegin(db, pVTab);
  if( pVTab ) sqlite3VtabImportErrmsg(p, pVTab->pVtab);
  break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */

#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Opcode: VCreate P1 P2 * * *
**
** P2 is a register that holds the name of a virtual table in database 
** P1. Call the xCreate method for that table.
*/
case OP_VCreate: {
  Mem sMem;          /* For storing the record being decoded */
  const char *zTab;  /* Name of the virtual table */

  memset(&sMem, 0, sizeof(sMem));
  sMem.db = db;
  /* Because P2 is always a static string, it is impossible for the
  ** sqlite3VdbeMemCopy() to fail */
  assert( (aMem[pOp->p2].flags & MEM_Str)!=0 );
  assert( (aMem[pOp->p2].flags & MEM_Static)!=0 );
  rc = sqlite3VdbeMemCopy(&sMem, &aMem[pOp->p2]);
  assert( rc==SQLITE_OK );
  zTab = (const char*)sqlite3_value_text(&sMem);
  assert( zTab || db->mallocFailed );
  if( zTab ){
    rc = sqlite3VtabCallCreate(db, pOp->p1, zTab, &p->zErrMsg);
  }
  sqlite3VdbeMemRelease(&sMem);
  break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */

#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Opcode: VDestroy P1 * * P4 *
**
** P4 is the name of a virtual table in database P1.  Call the xDestroy method
** of that table.
*/
case OP_VDestroy: {
  db->nVDestroy++;
  rc = sqlite3VtabCallDestroy(db, pOp->p1, pOp->p4.z);
  db->nVDestroy--;
  break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */

#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Opcode: VOpen P1 * * P4 *
**
** P4 is a pointer to a virtual table object, an sqlite3_vtab structure.
** P1 is a cursor number.  This opcode opens a cursor to the virtual
** table and stores that cursor in P1.
*/
case OP_VOpen: {
  VdbeCursor *pCur;
  sqlite3_vtab_cursor *pVtabCursor;
  sqlite3_vtab *pVtab;
  const sqlite3_module *pModule;

  assert( p->bIsReader );
  pCur = 0;
  pVtabCursor = 0;
  pVtab = pOp->p4.pVtab->pVtab;
  if( pVtab==0 || NEVER(pVtab->pModule==0) ){
    rc = SQLITE_LOCKED;
    break;
  }
  pModule = pVtab->pModule;
  rc = pModule->xOpen(pVtab, &pVtabCursor);
  sqlite3VtabImportErrmsg(p, pVtab);
  if( SQLITE_OK==rc ){
    /* Initialize sqlite3_vtab_cursor base class */
    pVtabCursor->pVtab = pVtab;

    /* Initialize vdbe cursor object */
    pCur = allocateCursor(p, pOp->p1, 0, -1, 0);
    if( pCur ){
      pCur->pVtabCursor = pVtabCursor;
      pVtab->nRef++;
    }else{
      db->mallocFailed = 1;
      pModule->xClose(pVtabCursor);
    }
  }
  break;
}

  {
    res = 0;
    apArg = p->apArg;
    for(i = 0; i<nArg; i++){
      apArg[i] = &pArgc[i+1];
    }


    rc = pModule->xFilter(pVtabCursor, iQuery, pOp->p4.z, nArg, apArg);

    sqlite3VtabImportErrmsg(p, pVtab);
    if( rc==SQLITE_OK ){
      res = pModule->xEof(pVtabCursor);
    }
    VdbeBranchTaken(res!=0,2);
    if( res ){
      pc = pOp->p2 - 1;

  /* Invoke the xNext() method of the module. There is no way for the
  ** underlying implementation to return an error if one occurs during
  ** xNext(). Instead, if an error occurs, true is returned (indicating that 
  ** data is available) and the error code returned when xColumn or
  ** some other method is next invoked on the save virtual table cursor.
  */

  rc = pModule->xNext(pCur->pVtabCursor);

  sqlite3VtabImportErrmsg(p, pVtab);
  if( rc==SQLITE_OK ){
    res = pModule->xEof(pCur->pVtabCursor);
  }
  VdbeBranchTaken(!res,2);
  if( !res ){
    /* If there is data, jump to P2 */

** is set to the value of the rowid for the row just inserted.
**
** P5 is the error actions (OE_Replace, OE_Fail, OE_Ignore, etc) to
** apply in the case of a constraint failure on an insert or update.
*/
case OP_VUpdate: {
  sqlite3_vtab *pVtab;
  const sqlite3_module *pModule;
  int nArg;
  int i;
  sqlite_int64 rowid;
  Mem **apArg;
  Mem *pX;

  assert( pOp->p2==1        || pOp->p5==OE_Fail   || pOp->p5==OE_Rollback 
       || pOp->p5==OE_Abort || pOp->p5==OE_Ignore || pOp->p5==OE_Replace
  );
  assert( p->readOnly==0 );
  pVtab = pOp->p4.pVtab->pVtab;
  if( pVtab==0 || NEVER(pVtab->pModule==0) ){
    rc = SQLITE_LOCKED;
    break;
  }
  pModule = pVtab->pModule;
  nArg = pOp->p2;
  assert( pOp->p4type==P4_VTAB );
  if( ALWAYS(pModule->xUpdate) ){
    u8 vtabOnConflict = db->vtabOnConflict;
    apArg = p->apArg;
    pX = &aMem[pOp->p3];
    for(i=0; i<nArg; i++){

/*
** An instance of the virtual machine.  This structure contains the complete
** state of the virtual machine.
**
** The "sqlite3_stmt" structure pointer that is returned by sqlite3_prepare()
** is really a pointer to an instance of this structure.








*/
struct Vdbe {
  sqlite3 *db;            /* The database connection that owns this statement */
  Op *aOp;                /* Space to hold the virtual machine's program */
  Mem *aMem;              /* The memory locations */
  Mem **apArg;            /* Arguments to currently executing user function */
  Mem *aColName;          /* Column names to return */

#ifdef SQLITE_DEBUG
  int rcApp;              /* errcode set by sqlite3_result_error_code() */
#endif
  u16 nResColumn;         /* Number of columns in one row of the result set */
  u8 errorAction;         /* Recovery action to do in case of an error */
  u8 minWriteFileFormat;  /* Minimum file format for writable database files */
  bft explain:2;          /* True if EXPLAIN present on SQL command */

  bft changeCntOn:1;      /* True to update the change-counter */
  bft expired:1;          /* True if the VM needs to be recompiled */
  bft runOnlyOnce:1;      /* Automatically expire on reset */
  bft usesStmtJournal:1;  /* True if uses a statement journal */
  bft readOnly:1;         /* True for statements that do not write */
  bft bIsReader:1;        /* True for statements that read */
  bft isPrepareV2:1;      /* True if prepared with prepare_v2() */

        zP4 = "(blob)";
      }
      break;
    }
#ifndef SQLITE_OMIT_VIRTUALTABLE
    case P4_VTAB: {
      sqlite3_vtab *pVtab = pOp->p4.pVtab->pVtab;
      sqlite3_snprintf(nTemp, zTemp, "vtab:%p", pVtab);
      break;
    }
#endif
    case P4_INTARRAY: {
      sqlite3_snprintf(nTemp, zTemp, "intarray");
      break;
    }

  }else if( pCx->pCursor ){
    sqlite3BtreeCloseCursor(pCx->pCursor);
  }
#ifndef SQLITE_OMIT_VIRTUALTABLE
  else if( pCx->pVtabCursor ){
    sqlite3_vtab_cursor *pVtabCursor = pCx->pVtabCursor;
    const sqlite3_module *pModule = pVtabCursor->pVtab->pModule;
    assert( pVtabCursor->pVtab->nRef>0 );
    pVtabCursor->pVtab->nRef--;
    pModule->xClose(pVtabCursor);

  }
#endif
}

/*
** Copy the values stored in the VdbeFrame structure to its Vdbe. This
** is used, for example, when a trigger sub-program is halted to restore

*/
static int vdbeSorterOpenTempFile(
  sqlite3 *db,                    /* Database handle doing sort */
  i64 nExtend,                    /* Attempt to extend file to this size */
  sqlite3_file **ppFd
){
  int rc;
  if( sqlite3FaultSim(202) ) return SQLITE_IOERR_ACCESS;
  rc = sqlite3OsOpenMalloc(db->pVfs, 0, ppFd,
      SQLITE_OPEN_TEMP_JOURNAL |
      SQLITE_OPEN_READWRITE    | SQLITE_OPEN_CREATE |
      SQLITE_OPEN_EXCLUSIVE    | SQLITE_OPEN_DELETEONCLOSE, &rc
  );
  if( rc==SQLITE_OK ){
    i64 max = SQLITE_MAX_MMAP_SIZE;

  ** do additional initialization work and store the statement text
  ** in the sqlite_master table.
  */
  if( !db->init.busy ){
    char *zStmt;
    char *zWhere;
    int iDb;
    int iReg;
    Vdbe *v;

    /* Compute the complete text of the CREATE VIRTUAL TABLE statement */
    if( pEnd ){
      pParse->sNameToken.n = (int)(pEnd->z - pParse->sNameToken.z) + pEnd->n;
    }
    zStmt = sqlite3MPrintf(db, "CREATE VIRTUAL TABLE %T", &pParse->sNameToken);

    sqlite3DbFree(db, zStmt);
    v = sqlite3GetVdbe(pParse);
    sqlite3ChangeCookie(pParse, iDb);

    sqlite3VdbeAddOp2(v, OP_Expire, 0, 0);
    zWhere = sqlite3MPrintf(db, "name='%q' AND type='table'", pTab->zName);
    sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere);

    iReg = ++pParse->nMem;
    sqlite3VdbeAddOp4(v, OP_String8, 0, iReg, 0, pTab->zName, 0);
    sqlite3VdbeAddOp2(v, OP_VCreate, iDb, iReg);
  }

  /* If we are rereading the sqlite_master table create the in-memory
  ** record of the table. The xConnect() method is not called until
  ** the first time the virtual table is used in an SQL statement. This
  ** allows a schema that contains virtual tables to be loaded before
  ** the required virtual table implementations are registered.  */

*/
int sqlite3VtabCallDestroy(sqlite3 *db, int iDb, const char *zTab){
  int rc = SQLITE_OK;
  Table *pTab;

  pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName);
  if( ALWAYS(pTab!=0 && pTab->pVTable!=0) ){
    VTable *p;
    for(p=pTab->pVTable; p; p=p->pNext){
      assert( p->pVtab );
      if( p->pVtab->nRef>0 ){
        return SQLITE_LOCKED;
      }


    }
    p = vtabDisconnectAll(db, pTab);
    rc = p->pMod->pModule->xDestroy(p->pVtab);
    /* Remove the sqlite3_vtab* from the aVTrans[] array, if applicable */
    if( rc==SQLITE_OK ){
      assert( pTab->pVTable==p && p->pNext==0 );
      p->pVtab = 0;
      pTab->pVTable = 0;
      sqlite3VtabUnlock(p);
    }

  ){
    Expr *pLeft;       /* LHS of LIKE/GLOB operator */
    Expr *pStr2;       /* Copy of pStr1 - RHS of LIKE/GLOB operator */
    Expr *pNewExpr1;
    Expr *pNewExpr2;
    int idxNew1;
    int idxNew2;
    const char *zCollSeqName;     /* Name of collating sequence */
    const u16 wtFlags = TERM_LIKEOPT | TERM_VIRTUAL | TERM_DYNAMIC;

    pLeft = pExpr->x.pList->a[1].pExpr;
    pStr2 = sqlite3ExprDup(db, pStr1, 0);

    /* Convert the lower bound to upper-case and the upper bound to
    ** lower-case (upper-case is less than lower-case in ASCII) so that

        ** LIKE on all candidate expressions by clearing the isComplete flag
        */
        if( c=='A'-1 ) isComplete = 0;
        c = sqlite3UpperToLower[c];
      }
      *pC = c + 1;
    }
    zCollSeqName = noCase ? "NOCASE" : "BINARY";

    pNewExpr1 = sqlite3ExprDup(db, pLeft, 0);
    pNewExpr1 = sqlite3PExpr(pParse, TK_GE,
           sqlite3ExprAddCollateString(pParse,pNewExpr1,zCollSeqName),
           pStr1, 0);
    transferJoinMarkings(pNewExpr1, pExpr);
    idxNew1 = whereClauseInsert(pWC, pNewExpr1, wtFlags);
    testcase( idxNew1==0 );
    exprAnalyze(pSrc, pWC, idxNew1);
    pNewExpr2 = sqlite3ExprDup(db, pLeft, 0);
    pNewExpr2 = sqlite3PExpr(pParse, TK_LT,
           sqlite3ExprAddCollateString(pParse,pNewExpr2,zCollSeqName),
           pStr2, 0);
    transferJoinMarkings(pNewExpr2, pExpr);
    idxNew2 = whereClauseInsert(pWC, pNewExpr2, wtFlags);
    testcase( idxNew2==0 );
    exprAnalyze(pSrc, pWC, idxNew2);
    pTerm = &pWC->a[idxTerm];
    if( isComplete ){

      }
      pLevel->iIdxCur = iIndexCur;
      assert( pIx->pSchema==pTab->pSchema );
      assert( iIndexCur>=0 );
      if( op ){
        sqlite3VdbeAddOp3(v, op, iIndexCur, pIx->tnum, iDb);
        sqlite3VdbeSetP4KeyInfo(pParse, pIx);
        if( (pLoop->wsFlags & WHERE_CONSTRAINT)!=0
         && (pLoop->wsFlags & (WHERE_COLUMN_RANGE|WHERE_SKIPSCAN))==0
         && (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)==0
        ){
          sqlite3VdbeChangeP5(v, OPFLAG_SEEKEQ); /* Hint to COMDB2 */
        }
        VdbeComment((v, "%s", pIx->zName));
      }
    }
    if( iDb>=0 ) sqlite3CodeVerifySchema(pParse, iDb);
    notReady &= ~getMask(&pWInfo->sMaskSet, pTabItem->iCursor);
  }
  pWInfo->iTop = sqlite3VdbeCurrentAddr(v);

#
# 2001 September 15
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is testing collation sequences.
#


set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix collate1

#
# Tests are roughly organised as follows:
#
# collate1-1.* - Single-field ORDER BY with an explicit COLLATE clause.
# collate1-2.* - Multi-field ORDER BY with an explicit COLLATE clause.
# collate1-3.* - ORDER BY using a default collation type. Also that an 

} {1}
do_test collate1-5.3 {
  execsql {
    SELECT id FROM c5 WHERE c='abc' ORDER BY id;
  }
} {1 2}



#-------------------------------------------------------------------------
# Fix problems with handling collation sequences named '"""'.
#
do_execsql_test 6.1 {
  SELECT """""""";
} {\"\"\"}

do_catchsql_test 6.2 {
  CREATE TABLE x1(a);
  SELECT a FROM x1 ORDER BY a COLLATE """""""";
} {1 {no such collation sequence: """}}

do_catchsql_test 6.3 {
  SELECT a FROM x1 ORDER BY 1 COLLATE """""""";
} {1 {no such collation sequence: """}}

do_catchsql_test 6.4 {
  SELECT 0 UNION SELECT 0 ORDER BY 1 COLLATE """""""";
} {1 {no such collation sequence: """}}

db collate {"""} [list string compare -nocase]

do_execsql_test 6.5 {
  PRAGMA foreign_keys = ON;
  CREATE TABLE p1(a PRIMARY KEY COLLATE '"""');
  CREATE TABLE c1(x, y REFERENCES p1);
} {}

do_execsql_test 6.6 { 
  INSERT INTO p1 VALUES('abc'); 
  INSERT INTO c1 VALUES(1, 'ABC'); 
}

ifcapable foreignkey {
  do_catchsql_test 6.7 { 
    DELETE FROM p1 WHERE rowid = 1 
  } {1 {FOREIGN KEY constraint failed}}
}

do_execsql_test 6.8 { 
  INSERT INTO p1 VALUES('abb');
  INSERT INTO p1 VALUES('wxz');
  INSERT INTO p1 VALUES('wxy');

  INSERT INTO c1 VALUES(2, 'abb');
  INSERT INTO c1 VALUES(3, 'wxz');
  INSERT INTO c1 VALUES(4, 'WXY');
  SELECT x, y FROM c1 ORDER BY y COLLATE """""""";
} {2 abb 1 ABC 4 WXY 3 wxz}

finish_test

  do_test 5.2 {
    set str [cp_to_str {19968 26085 32822 32645 27874 23433 20986}]
    execsql { INSERT INTO x1 VALUES($str) }
  } {}
}


do_test fts3token-internal {
  execsql { SELECT fts3_tokenizer_internal_test() }
} {ok}

#-------------------------------------------------------------------------
# Test empty tokenizer names.
#
do_catchsql_test 6.1.1 {
  CREATE VIRTUAL TABLE t3 USING fts4(tokenize="");
} {1 {unknown tokenizer: }}
do_catchsql_test 6.1.2 {
  CREATE VIRTUAL TABLE t3 USING fts4(tokenize=);
} {1 {unknown tokenizer: }}
do_catchsql_test 6.1.3 {
  CREATE VIRTUAL TABLE t3 USING fts4(tokenize="   ");
} {1 {unknown tokenizer:    }}

do_catchsql_test 6.2.1 {
  SELECT fts3_tokenizer(NULL);
} {1 {unknown tokenizer: }}
do_catchsql_test 6.2.2 {
  SELECT fts3_tokenizer(NULL, X'1234567812345678');
} {1 {argument type mismatch}}
do_catchsql_test 6.2.3 {
  SELECT fts3_tokenizer(NULL, X'12345678');
} {1 {argument type mismatch}}


finish_test

#
do_catchsql_test 5.1 {
  CREATE VIRTUAL TABLE t4 USING fts4(prefix="abc");
} {1 {error parsing prefix parameter: abc}}
do_catchsql_test 5.2 {
  CREATE VIRTUAL TABLE t4 USING fts4(prefix="");
} {0 {}}
do_catchsql_test 5.3 {
  CREATE VIRTUAL TABLE t5 USING fts4(prefix="-1");
} {1 {error parsing prefix parameter: -1}}

#-------------------------------------------------------------------------
# Prefix indexes of size 0 are ignored. Demonstrate this by showing that
# adding prefix=0 does not change the contents of the %_segdir table.
#
reset_db
do_execsql_test 6.1.1 {
  CREATE VIRTUAL TABLE t1 USING fts4(prefix=0);
  CREATE VIRTUAL TABLE t2 USING fts4;
  INSERT INTO t1 VALUES('Twas Mulga Bill, from Eaglehawk, ');
  INSERT INTO t2 VALUES('Twas Mulga Bill, from Eaglehawk, ');
} {}
do_execsql_test 6.1.2 {
  SELECT md5sum(quote(root)) FROM t1_segdir;
} [db eval {SELECT md5sum(quote(root)) FROM t2_segdir}]

reset_db
do_execsql_test 6.2.1 {
  CREATE VIRTUAL TABLE t1 USING fts4(prefix="1,0,2");
  CREATE VIRTUAL TABLE t2 USING fts4(prefix="1,2");
  INSERT INTO t1 VALUES('that caught the cycling craze;');
  INSERT INTO t2 VALUES('that caught the cycling craze;');
} {}
do_execsql_test 6.2.2 {
  SELECT md5sum(quote(root)) FROM t1_segdir;
} [db eval {SELECT md5sum(quote(root)) FROM t2_segdir}]

reset_db
do_execsql_test 6.3.1 {
  CREATE VIRTUAL TABLE t1 USING fts4(prefix="1,3,2");
  CREATE VIRTUAL TABLE t2 USING fts4(prefix="1,2");
  INSERT INTO t1 VALUES('He turned away the good old horse');
  INSERT INTO t2 VALUES('He turned away the good old horse');
} {}
do_test 6.3.2 {
  set one [db eval {SELECT md5sum(quote(root)) FROM t1_segdir}]
  set two [db eval {SELECT md5sum(quote(root)) FROM t2_segdir}]
  expr {$one == $two}
} 0

reset_db
do_execsql_test 6.4.1 {
  CREATE VIRTUAL TABLE t1 USING fts4(prefix="1,600,2");
  CREATE VIRTUAL TABLE t2 USING fts4(prefix="1,2");
  INSERT INTO t1 VALUES('that served him many days;');
  INSERT INTO t2 VALUES('that served him many days;');
} {}
do_execsql_test 6.4.2 {
  SELECT md5sum(quote(root)) FROM t1_segdir;
} [db eval {SELECT md5sum(quote(root)) FROM t2_segdir}]

reset_db
do_execsql_test 6.5.1 {
  CREATE VIRTUAL TABLE t1 USING fts4(prefix="2147483647,2147483648,2147483649");
  CREATE VIRTUAL TABLE t2 USING fts4(prefix=);
  INSERT INTO t1 VALUES('He dressed himself in cycling clothes');
  INSERT INTO t2 VALUES('He dressed himself in cycling clothes');
} {}
do_execsql_test 6.5.2 {
  SELECT md5sum(quote(root)) FROM t1_segdir;
} [db eval {SELECT md5sum(quote(root)) FROM t2_segdir}]

finish_test

#
#***********************************************************************
# This file implements regression tests for SQLite library.
#
# This file implements tests for miscellanous features that were
# left out of other test files.
#


set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Mimic the SQLite 2 collation type NUMERIC.
db collate numeric numeric_collate
proc numeric_collate {lhs rhs} {

# presumably.
#
do_execsql_test misc1-20.1 {
  CREATE TABLE t0(x INTEGER DEFAULT(0==0) NOT NULL);
  REPLACE INTO t0(x) VALUES('');
  SELECT rowid, quote(x) FROM t0;
} {1 ''}

# 2015-03-22: NULL pointer dereference after a syntax error
#
do_catchsql_test misc1-21.1 {
  select''like''like''like#0;
} {1 {near "#0": syntax error}}
do_catchsql_test misc1-21.2 {
  VALUES(0,0x0MATCH#0;
} {1 {near ";": syntax error}}

finish_test

#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# The focus of this file is testing the CLI shell tool.
# These tests are specific to the .stats command.
#
# 2015-03-19:  Added tests for .trace


# Test plan:
#
#   shell4-1.*: Basic tests specific to the "stats" command.
#   shell4-2.*: Basic tests for ".trace"
#
set testdir [file dirname $argv0]
source $testdir/tester.tcl
if {$tcl_platform(platform)=="windows"} {
  set CLI "sqlite3.exe"
} else {
  set CLI "./sqlite3"

  set res [catchcmd "test.db" {.stats ON
SELECT 1;
}]
  list [regexp {Memory Used} $res] \
       [regexp {Heap Usage} $res] \
       [regexp {Autoindex Inserts} $res]
} {1 1 1}

do_test shell4-2.1 {
  catchcmd ":memory:" "CREATE TABLE t1(x);\n.trace"
} {1 {Usage: .trace FILE|off}}
do_test shell4-2.2 {
  catchcmd ":memory:" "CREATE TABLE t1(x);\n.trace off\n.trace off\n"
} {0 {}}
do_test shell4-2.3 {
  catchcmd ":memory:" ".trace stdout\n.trace\n.trace off\n.dump\n"
} {/^1 {PRAGMA.*Usage:.*}$/}
ifcapable trace {
do_test shell4-2.4 {
  catchcmd ":memory:" ".trace stdout\nCREATE TABLE t1(x);SELECT * FROM t1;"
} {0 {CREATE TABLE t1(x);
SELECT * FROM t1;}}
do_test shell4-2.5 {
  catchcmd ":memory:" "CREATE TABLE t1(x);\n.trace stdout\nSELECT * FROM t1;"
} {0 {SELECT * FROM t1;}}
}


finish_test

  } {SQLITE_DONE}
  
  do_test 22.4.2 {
    sqlite3_finalize $stmt
  } {SQLITE_OK}
}


#-------------------------------------------------------------------------
# The following tests verify that a DROP TABLE command on a virtual
# table does not cause other operations to crash.
#
#   23.1: Dropping a vtab while a SELECT is running on it.
#
#   23.2: Dropping a vtab while a SELECT that will, but has not yet,
#         open a cursor on the vtab, is running. In this case the
#         DROP TABLE succeeds and the SELECT hits an error.
#   
#   23.3: Dropping a vtab from within a user-defined-function callback
#         in the middle of an "INSERT INTO vtab SELECT ..." statement.
#
reset_db
load_static_extension db wholenumber
load_static_extension db eval
register_echo_module db

do_test 23.1 {
  execsql { CREATE VIRTUAL TABLE t1 USING wholenumber }
  set res ""
  db eval { SELECT value FROM t1 WHERE value<10 } {
    if {$value == 5} {
      set res [catchsql { DROP TABLE t1 }]
    }
  }
  set res
} {1 {database table is locked}}

do_test 23.2 {
  execsql { 
    CREATE TABLE t2(value);
    INSERT INTO t2 VALUES(1), (2), (3);
  }

  set res2 [list [catch {
    db eval {
      SELECT value FROM t2 UNION ALL 
      SELECT value FROM t1 WHERE value<10
    } {
      if {$value == 2} { set res1 [catchsql { DROP TABLE t1 }] }
    }
  } msg] $msg]
  list $res1 $res2
} {{0 {}} {1 {database table is locked}}}

do_test 23.3.1 {
  execsql { CREATE VIRTUAL TABLE t1e USING echo(t2) }
  execsql { INSERT INTO t1e SELECT 4 }
  catchsql { INSERT INTO t1e SELECT eval('DROP TABLE t1e') }
} {1 {database table is locked}}
do_execsql_test 23.3.2 { SELECT * FROM t1e } {1 2 3 4}

finish_test

# 2006 June 10
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.
#


set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix vtab2

ifcapable !vtab||!schema_pragmas {
  finish_test
  return
}

register_schema_module [sqlite3_connection_pointer db]

    UPDATE fkey 
    SET to_col = (SELECT name FROM v_col WHERE tablename = 't1' AND pk);
  }
} {}
do_test vtab2-4.5 {
  execsql { SELECT * FROM fkey }
} {t1 a}

#-------------------------------------------------------------------------
#
ifcapable fts3 {
  reset_db
  do_execsql_test 5.1 {
    PRAGMA encoding='UTF16';
  }

  do_test 5.2 {
    sqlite3_exec_hex db { CREATE VIRTUAL TABLE %C8 USING fts3 }
  } {0 {}}

  do_test 5.3 {
    sqlite3_exec_hex db { CREATE VIRTUAL TABLE %C9 USING s }
  } {/1 {malformed database schema.* already exists}/}
}



finish_test

tvfs script barrier_callback
tvfs filter xShmBarrier
proc barrier_callback {method args} {
  set ::out ""
  testfixture $::C { db eval { SELECT * FROM t1 } } {set ::out}

  do_test "1.2.2.(blocking 10 seconds)" { 
    set ::continue 0
    after 10000 {set ::continue 1}
    vwait ::continue
    set ::out 
  } {}
}

execsql COMMIT

do_execsql_test 12.1 {
WITH RECURSIVE
  t1(x) AS (VALUES(2) UNION ALL SELECT x+2 FROM t1 WHERE x<20),
  t2(y) AS (VALUES(3) UNION ALL SELECT y+3 FROM t2 WHERE y<20)
SELECT x FROM t1 EXCEPT SELECT y FROM t2 ORDER BY 1;
} {2 4 8 10 14 16 20}

# 2015-03-21
# Column wildcards on the LHS of a recursive table expression
#
do_catchsql_test 13.1 {
  WITH RECURSIVE c(i) AS (SELECT * UNION ALL SELECT i+1 FROM c WHERE i<10)
  SELECT i FROM c;
} {1 {no tables specified}}
do_catchsql_test 13.2 {
  WITH RECURSIVE c(i) AS (SELECT 5,* UNION ALL SELECT i+1 FROM c WHERE i<10)
  SELECT i FROM c;
} {1 {no tables specified}}
do_catchsql_test 13.3 {
  WITH RECURSIVE c(i,j) AS (SELECT 5,* UNION ALL SELECT i+1,11 FROM c WHERE i<10)
  SELECT i FROM c;
} {1 {table c has 1 values for 2 columns}}

finish_test

} {x123y}
do_execsql_test without_rowid6-130 {
  SELECT c FROM t1 ORDER BY a DESC LIMIT 5;
} {x1000y x999y x998y x997y x996y}
do_execsql_test without_rowid6-140 {
  SELECT c FROM t1 ORDER BY b LIMIT 5;
} {x1y x2y x3y x4y x5y}

# Column t1.b starts out as a unique index, but that index is
# subsequently converted into a PRIMARY KEY.
#
do_execsql_test without_rowid6-200 {
  DROP TABLE IF EXISTS t1;
  CREATE TABLE t1(
    a UNIQUE,
    b UNIQUE,
    c UNIQUE,
    PRIMARY KEY(b)
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,8,3),(4,5,6),(7,2,9);
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {4 1}
do_execsql_test without_rowid6-210 {
  EXPLAIN QUERY PLAN
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {/SEARCH TABLE t1 USING PRIMARY KEY .b>../}
do_execsql_test without_rowid6-220 {
  PRAGMA index_list(t1);
} {/sqlite_autoindex_t1_2 1 pk/}

do_execsql_test without_rowid6-300 {
  DROP TABLE IF EXISTS t1;
  CREATE TABLE t1(
    a UNIQUE,
    b PRIMARY KEY,
    c UNIQUE,
    UNIQUE(b)
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,8,3),(4,5,6),(7,2,9);
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {4 1}
do_execsql_test without_rowid6-310 {
  EXPLAIN QUERY PLAN
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {/SEARCH TABLE t1 USING PRIMARY KEY .b>../}
do_execsql_test without_rowid6-320 {
  PRAGMA index_list(t1);
} {/sqlite_autoindex_t1_2 1 pk/}

do_execsql_test without_rowid6-400 {
  DROP TABLE IF EXISTS t1;
  CREATE TABLE t1(
    a UNIQUE,
    b UNIQUE PRIMARY KEY,
    c UNIQUE
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,8,3),(4,5,6),(7,2,9);
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {4 1}
do_execsql_test without_rowid6-410 {
  EXPLAIN QUERY PLAN
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {/SEARCH TABLE t1 USING PRIMARY KEY .b>../}
do_execsql_test without_rowid6-420 {
  PRAGMA index_list(t1);
} {/sqlite_autoindex_t1_2 1 pk/}

do_execsql_test without_rowid6-500 {
  DROP TABLE IF EXISTS t1;
  CREATE TABLE t1(a,b,c,
    UNIQUE(b,c),
    PRIMARY KEY(b,c)
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,8,3),(4,5,6),(7,2,9);
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {4 1}
do_execsql_test without_rowid6-510 {
  EXPLAIN QUERY PLAN
  SELECT a FROM t1 WHERE b>3 ORDER BY b;
} {/SEARCH TABLE t1 USING PRIMARY KEY .b>../}
do_execsql_test without_rowid6-520 {
  PRAGMA index_list(t1);
} {/sqlite_autoindex_t1_1 1 pk/}


finish_test

REM SET __ECHO=ECHO
REM SET __ECHO2=ECHO
REM SET __ECHO3=ECHO
IF NOT DEFINED _AECHO (SET _AECHO=REM)
IF NOT DEFINED _CECHO (SET _CECHO=REM)
IF NOT DEFINED _VECHO (SET _VECHO=REM)

SET REDIRECT=^>
IF DEFINED __ECHO SET REDIRECT=^^^>

%_AECHO% Running %0 %*

REM SET DFLAGS=/L

%_VECHO% DFlags = '%DFLAGS%'

SET FFLAGS=/V /F /G /H /I /R /Y /Z

      REM NOTE: When preparing the debug build, set the DEBUG and MEMDEBUG
      REM       environment variables to be picked up by the MSVC makefile
      REM       itself.
      REM
      %_AECHO% Building the %%B configuration for platform %%P with name %%D...

      IF /I "%%B" == "Debug" (
        REM
        REM NOTE: Using this level for the DEBUG environment variable should
        REM       disable all compiler optimizations and prevent use of the
        REM       NDEBUG define.  Additionally, both SQLITE_ENABLE_API_ARMOR
        REM       and SQLITE_DEBUG defines should be enabled.
        REM
        SET DEBUG=3

        REM
        REM NOTE: Setting this to non-zero should enable the SQLITE_MEMDEBUG
        REM       define.
        REM
        SET MEMDEBUG=1
      ) ELSE (
        CALL :fn_UnsetVariable DEBUG
        CALL :fn_UnsetVariable MEMDEBUG
      )

      REM

          IF ERRORLEVEL 1 (
            ECHO Failed to clean for platform %%P.
            GOTO errors
          )
        ) ELSE (
          REM
          REM NOTE: Even when the cleaning step has been disabled, we still
          REM       need to remove the build output for all the files we are
          REM       specifically wanting to build for each platform.
          REM
          %_AECHO% Cleaning final core library output files only...
          %__ECHO% DEL /Q *.lo sqlite3.dll sqlite3.lib sqlite3.pdb 2%REDIRECT% NUL
        )

        REM
        REM NOTE: Call NMAKE with the MSVC makefile to build the "sqlite3.dll"
        REM       binary.  The x86 compiler will be used to compile the native
        REM       command line tools needed during the build process itself.
        REM       Also, disable looking for and/or linking to the native Tcl

          %__ECHO% XCOPY sqlite3.pdb "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%

          IF ERRORLEVEL 1 (
            ECHO Failed to copy "sqlite3.pdb" to "%BINARYDIRECTORY%\%%B\%%D\".
            GOTO errors
          )
        )

        REM
        REM NOTE: If requested, also build the shell executable.
        REM
        IF DEFINED BUILD_ALL_SHELL (
          REM
          REM NOTE: If necessary, make sure any previous build output for the
          REM       shell executable is deleted.
          REM
          IF DEFINED NOCLEAN (
            REM
            REM NOTE: Even when the cleaning step has been disabled, we still
            REM       need to remove the build output for all the files we are
            REM       specifically wanting to build for each platform.
            REM
            %_AECHO% Cleaning final shell executable output files only...
            %__ECHO% DEL /Q sqlite3.exe sqlite3sh.pdb 2%REDIRECT% NUL
          )

          REM
          REM NOTE: Call NMAKE with the MSVC makefile to build the "sqlite3.exe"
          REM       binary.  The x86 compiler will be used to compile the native
          REM       command line tools needed during the build process itself.
          REM       Also, disable looking for and/or linking to the native Tcl
          REM       runtime library.
          REM
          %__ECHO% %NMAKE_CMD% sqlite3.exe XCOMPILE=1 USE_NATIVE_LIBPATHS=1 NO_TCL=1 %NMAKE_ARGS%

          IF ERRORLEVEL 1 (
            ECHO Failed to build %%B "sqlite3.exe" for platform %%P.
            GOTO errors
          )

          REM
          REM NOTE: Copy the "sqlite3.exe" file to the appropriate directory
          REM       for the build and platform beneath the binary directory.
          REM
          %__ECHO% XCOPY sqlite3.exe "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%

          IF ERRORLEVEL 1 (
            ECHO Failed to copy "sqlite3.exe" to "%BINARYDIRECTORY%\%%B\%%D\".
            GOTO errors
          )

          REM
          REM NOTE: Copy the "sqlite3sh.pdb" file to the appropriate directory
          REM       for the build and platform beneath the binary directory
          REM       unless we are prevented from doing so.
          REM
          IF NOT DEFINED NOSYMBOLS (
            %__ECHO% XCOPY sqlite3sh.pdb "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%

            IF ERRORLEVEL 1 (
              ECHO Failed to copy "sqlite3sh.pdb" to "%BINARYDIRECTORY%\%%B\%%D\".
              GOTO errors
            )
          )
        )
      )
    )
  )

  REM
  REM NOTE: Handle any errors generated during the nested command shell.
  REM

static void decodeCell(
  unsigned char *a,       /* Page content (without the page-1 header) */
  unsigned pgno,          /* Page number */
  int iCell,              /* Cell index */
  int szPgHdr,            /* Size of the page header.  0 or 100 */
  int ofst                /* Cell begins at a[ofst] */
){
  int i, j = 0;
  int leftChild;
  i64 k;
  i64 nPayload;
  i64 rowid;
  i64 nHdr;
  i64 iType;
  i64 nLocal;