**
*************************************************************************
** This file contains SQLite's grammar for SQL.  Process this file
** using the lemon parser generator to generate C code that runs
** the parser.  Lemon will also generate a header file containing
** numeric codes for all of the tokens.
**
** @(#) $Id: parse.y,v 1.199 2006/03/13 12:54:10 drh Exp $
*/

// All token codes are small integers with #defines that begin with "TK_"
%token_prefix TK_

// The type of the data attached to each token is Token.  This is also the
// default type for non-terminals.
................................................................................

// The generated parser function takes a 4th argument as follows:
%extra_argument {Parse *pParse}

// This code runs whenever there is a syntax error
//
%syntax_error {
  if( pParse->zErrMsg==0 ){
    if( TOKEN.z[0] ){
      sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN);
    }else{
      sqlite3ErrorMsg(pParse, "incomplete SQL statement");
    }

  }
}
%stack_overflow {
  sqlite3ErrorMsg(pParse, "parser stack overflow");

}

// The name of the generated procedure that implements the parser
// is as follows:
%name sqlite3Parser

// The following text is included near the beginning of the C source

**
*************************************************************************
** This file contains SQLite's grammar for SQL.  Process this file
** using the lemon parser generator to generate C code that runs
** the parser.  Lemon will also generate a header file containing
** numeric codes for all of the tokens.
**
** @(#) $Id: parse.y,v 1.200 2006/05/25 12:17:31 drh Exp $
*/

// All token codes are small integers with #defines that begin with "TK_"
%token_prefix TK_

// The type of the data attached to each token is Token.  This is also the
// default type for non-terminals.
................................................................................

// The generated parser function takes a 4th argument as follows:
%extra_argument {Parse *pParse}

// This code runs whenever there is a syntax error
//
%syntax_error {
  if( !pParse->parseError ){
    if( TOKEN.z[0] ){
      sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN);
    }else{
      sqlite3ErrorMsg(pParse, "incomplete SQL statement");
    }
    pParse->parseError = 1;
  }
}
%stack_overflow {
  sqlite3ErrorMsg(pParse, "parser stack overflow");
  pParse->parseError = 1;
}

// The name of the generated procedure that implements the parser
// is as follows:
%name sqlite3Parser

// The following text is included near the beginning of the C source

**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** Internal interface definitions for SQLite.
**
** @(#) $Id: sqliteInt.h,v 1.493 2006/04/04 01:54:55 drh Exp $
*/
#ifndef _SQLITEINT_H_
#define _SQLITEINT_H_

/*
** Extra interface definitions for those who need them
*/
................................................................................
  int rc;              /* Return code from execution */
  char *zErrMsg;       /* An error message */
  Vdbe *pVdbe;         /* An engine for executing database bytecode */
  u8 colNamesSet;      /* TRUE after OP_ColumnName has been issued to pVdbe */
  u8 nameClash;        /* A permanent table name clashes with temp table name */
  u8 checkSchema;      /* Causes schema cookie check after an error */
  u8 nested;           /* Number of nested calls to the parser/code generator */

  int nErr;            /* Number of errors seen */
  int nTab;            /* Number of previously allocated VDBE cursors */
  int nMem;            /* Number of memory cells used so far */
  int nSet;            /* Number of sets used so far */
  int ckOffset;        /* Stack offset to data used by CHECK constraints */
  u32 writeMask;       /* Start a write transaction on these databases */
  u32 cookieMask;      /* Bitmask of schema verified databases */

**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** Internal interface definitions for SQLite.
**
** @(#) $Id: sqliteInt.h,v 1.494 2006/05/25 12:17:31 drh Exp $
*/
#ifndef _SQLITEINT_H_
#define _SQLITEINT_H_

/*
** Extra interface definitions for those who need them
*/
................................................................................
  int rc;              /* Return code from execution */
  char *zErrMsg;       /* An error message */
  Vdbe *pVdbe;         /* An engine for executing database bytecode */
  u8 colNamesSet;      /* TRUE after OP_ColumnName has been issued to pVdbe */
  u8 nameClash;        /* A permanent table name clashes with temp table name */
  u8 checkSchema;      /* Causes schema cookie check after an error */
  u8 nested;           /* Number of nested calls to the parser/code generator */
  u8 parseError;       /* True if a parsing error has been seen */
  int nErr;            /* Number of errors seen */
  int nTab;            /* Number of previously allocated VDBE cursors */
  int nMem;            /* Number of memory cells used so far */
  int nSet;            /* Number of sets used so far */
  int ckOffset;        /* Stack offset to data used by CHECK constraints */
  u32 writeMask;       /* Start a write transaction on these databases */
  u32 cookieMask;      /* Bitmask of schema verified databases */

#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is testing the ATTACH and DETACH commands
# and related functionality.
#
# $Id: attach.test,v 1.42 2006/01/16 16:24:25 danielk1977 Exp $
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

for {set i 2} {$i<=15} {incr i} {
  file delete -force test$i.db
................................................................................
  db close
  sqlite3 db test.db
  db2 close
  file delete -force test2.db
  sqlite3 db2 test2.db
  catchsql {
    ATTACH DATABASE 'test.db' AS orig;
    CREATE TRIGGER r1 AFTER INSERT ON orig.t1 BEGIN;
      SELECT 'no-op';
    END;
  } db2
} {1 {trigger r1 cannot reference objects in database orig}}
do_test attach-5.2 {
  catchsql {
    CREATE TABLE t5(x,y);

#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is testing the ATTACH and DETACH commands
# and related functionality.
#
# $Id: attach.test,v 1.43 2006/05/25 12:17:32 drh Exp $
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

for {set i 2} {$i<=15} {incr i} {
  file delete -force test$i.db
................................................................................
  db close
  sqlite3 db test.db
  db2 close
  file delete -force test2.db
  sqlite3 db2 test2.db
  catchsql {
    ATTACH DATABASE 'test.db' AS orig;
    CREATE TRIGGER r1 AFTER INSERT ON orig.t1 BEGIN
      SELECT 'no-op';
    END;
  } db2
} {1 {trigger r1 cannot reference objects in database orig}}
do_test attach-5.2 {
  catchsql {
    CREATE TABLE t5(x,y);