SQLite

sqlite3$(TEXE):	$(TOP)/src/shell.c libsqlite3.la sqlite3.h
	$(LTLINK) $(READLINE_FLAGS) $(SHELL_OPT) -o $@ \
		$(TOP)/src/shell.c libsqlite3.la \
		$(LIBREADLINE) $(TLIBS) -rpath "$(libdir)"

sqldiff$(TEXE):	$(TOP)/tool/sqldiff.c sqlite3.c sqlite3.h
	$(LTLINK) -o $@ $(TOP)/tool/sqldiff.c sqlite3.c $(TLIBS)

srcck1$(BEXE):	$(TOP)/tool/srcck1.c
	$(BCC) -o srcck1$(BEXE) $(TOP)/tool/srcck1.c

sourcetest:	srcck1$(BEXE) sqlite3.c
	./srcck1 sqlite3.c

fuzzershell$(TEXE):	$(TOP)/tool/fuzzershell.c sqlite3.c sqlite3.h
	$(LTLINK) -o $@ $(FUZZERSHELL_OPT) \
	  $(TOP)/tool/fuzzershell.c sqlite3.c $(TLIBS)

fuzzcheck$(TEXE):	$(TOP)/test/fuzzcheck.c sqlite3.c sqlite3.h
	$(LTLINK) -o $@ $(FUZZCHECK_OPT) $(TOP)/test/fuzzcheck.c sqlite3.c $(TLIBS)

#
quicktest:	./testfixture$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/extraquick.test $(TESTOPTS)

# This is the common case.  Run many tests that do not take too long,
# including fuzzcheck, sqlite3_analyzer, and sqldiff tests.
#
test:	$(TESTPROGS) sourcetest fastfuzztest
	./testfixture$(TEXE) $(TOP)/test/veryquick.test $(TESTOPTS)

# Run a test using valgrind.  This can take a really long time
# because valgrind is so much slower than a native machine.
#
valgrindtest:	$(TESTPROGS) valgrindfuzz
	OMIT_MISUSE=1 valgrind -v ./testfixture$(TEXE) $(TOP)/test/permutations.test valgrind $(TESTOPTS)

	rm -f sqlite3.c
	rm -f sqlite3rc.h
	rm -f shell.c sqlite3ext.h
	rm -f sqlite3_analyzer$(TEXE) sqlite3_analyzer.c
	rm -f sqlite-*-output.vsix
	rm -f mptester mptester.exe
	rm -f rbu rbu.exe
	rm -f srcck1 srcck1.exe
	rm -f fuzzershell fuzzershell.exe
	rm -f fuzzcheck fuzzcheck.exe
	rm -f sqldiff sqldiff.exe
	rm -f fts5.* fts5parse.*

distclean:	clean
	rm -f config.h config.log config.status libtool Makefile sqlite3.pc

#
# nmake Makefile for SQLite
#
###############################################################################
############################## START OF OPTIONS ###############################
###############################################################################

# The toplevel directory of the source tree.  This is the directory
# that contains this "Makefile.msc".
#
TOP = .

# <<mark>>
# Set this non-0 to create and use the SQLite amalgamation file.
#
!IFNDEF USE_AMALGAMATION
USE_AMALGAMATION = 1
!ENDIF
# <</mark>>

# Set this non-0 to enable full warnings (-W4, etc) when compiling.
#
!IFNDEF USE_FULLWARN
USE_FULLWARN = 0
!ENDIF

# Set this non-0 to split the SQLite amalgamation file into chunks to
# be used for debugging with Visual Studio.
#
!IFNDEF SPLIT_AMALGAMATION
SPLIT_AMALGAMATION = 0
!ENDIF

# <<mark>>
# Set this non-0 to use the International Components for Unicode (ICU).
#
!IFNDEF USE_ICU
USE_ICU = 0
!ENDIF
# <</mark>>

# Set this non-0 to dynamically link to the MSVC runtime library.
#
!IFNDEF USE_CRT_DLL
USE_CRT_DLL = 0
!ENDIF

# Set this non-0 to compile binaries suitable for the Windows 10 platform.
#
!IFNDEF FOR_WIN10
FOR_WIN10 = 0
!ENDIF

# <<mark>>
# Set this non-0 to skip attempting to look for and/or link with the Tcl
# runtime library.
#
!IFNDEF NO_TCL
NO_TCL = 0
!ENDIF
# <</mark>>

# Set this to non-0 to create and use PDBs.
#
!IFNDEF SYMBOLS
SYMBOLS = 1
!ENDIF

EXT_FEATURE_FLAGS =
!ENDIF
!ENDIF

###############################################################################
############################### END OF OPTIONS ################################
###############################################################################

# When compiling for the Windows 10 platform, the PLATFORM macro must be set
# to an appropriate value (e.g. x86, x64, arm, arm64, etc).
#
!IF $(FOR_WIN10)!=0
!IFNDEF PLATFORM
!ERROR Using the FOR_WIN10 option requires a value for PLATFORM.
!ENDIF
!ENDIF

# This assumes that MSVC is always installed in 32-bit Program Files directory
# and sets the variable for use in locating other 32-bit installs accordingly.
#
PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\..
PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\)

# compiler binary for the target platform.  If it is not defined, simply define
# it to the legacy default value 'rc.exe'.
#
!IFNDEF RC
RC = rc.exe
!ENDIF

# Check for the MSVC runtime library path macro.  Otherwise, this value will
# default to the 'lib' directory underneath the MSVC installation directory.
#
!IFNDEF CRTLIBPATH
CRTLIBPATH = $(VCINSTALLDIR)\lib
!ENDIF

CRTLIBPATH = $(CRTLIBPATH:\\=\)

!ELSEIF $(XCOMPILE)!=0
NCC = "$(VCINSTALLDIR)\bin\$(CC)"
NCC = $(NCC:\\=\)
!ELSE
NCC = $(CC)
!ENDIF

# Check for the MSVC native runtime library path macro.  Otherwise,
# this value will default to the 'lib' directory underneath the MSVC
# installation directory.
#
!IFNDEF NCRTLIBPATH
NCRTLIBPATH = $(VCINSTALLDIR)\lib
!ENDIF

NCRTLIBPATH = $(NCRTLIBPATH:\\=\)

# Check for the Platform SDK library path macro.  Otherwise, this
# value will default to the 'lib' directory underneath the Windows
# SDK installation directory (the environment variable used appears
# to be available when using Visual C++ 2008 or later via the
# command line).
#
!IFNDEF NSDKLIBPATH
NSDKLIBPATH = $(WINDOWSSDKDIR)\lib
!ENDIF

NSDKLIBPATH = $(NSDKLIBPATH:\\=\)

# Check for the UCRT library path macro.  Otherwise, this value will
# default to the version-specific, platform-specific 'lib' directory
# underneath the Windows SDK installation directory.
#
!IFNDEF UCRTLIBPATH
UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM)
!ENDIF

UCRTLIBPATH = $(UCRTLIBPATH:\\=\)

# C compiler and options for use in building executables that
# will run on the platform that is doing the build.
#
!IF $(USE_FULLWARN)!=0
BCC = $(NCC) -nologo -W4 $(CCOPTS) $(BCCOPTS)
!ELSE

!ENDIF

# Also, we need to dynamically link to the correct MSVC runtime
# when compiling for WinRT (e.g. debug or release) OR if the
# USE_CRT_DLL option is set to force dynamically linking to the
# MSVC runtime library.
#
!IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0
!IF $(DEBUG)>1
TCC = $(TCC) -MDd
BCC = $(BCC) -MDd
!ELSE
TCC = $(TCC) -MD
BCC = $(BCC) -MD
!ENDIF
!ELSE
!IF $(DEBUG)>1
TCC = $(TCC) -MTd
BCC = $(BCC) -MTd
!ELSE
TCC = $(TCC) -MT
BCC = $(BCC) -MT
!ENDIF
!ENDIF

# <<mark>>
# The mksqlite3c.tcl and mksqlite3h.tcl scripts will pull in
# any extension header files by default.  For non-amalgamation
# builds, we need to make sure the compiler can find these.
#
!IF $(USE_AMALGAMATION)==0
TCC = $(TCC) -I$(TOP)\ext\fts3
RCC = $(RCC) -I$(TOP)\ext\fts3

!IFNDEF MKSQLITE3C_ARGS
!IF $(DEBUG)>1
MKSQLITE3C_ARGS = --linemacros
!ELSE
MKSQLITE3C_ARGS =
!ENDIF
!ENDIF
# <</mark>>

# Define -DNDEBUG to compile without debugging (i.e., for production usage)
# Omitting the define will cause extra debugging code to be inserted and
# includes extra comments when "EXPLAIN stmt" is used.
#
!IF $(DEBUG)==0
TCC = $(TCC) -DNDEBUG

#
!IF $(DEBUG)>3
TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
!ENDIF
!ENDIF

# <<mark>>
# The locations of the Tcl header and library files.  Also, the library that
# non-stubs enabled programs using Tcl must link against.  These variables
# (TCLINCDIR, TCLLIBDIR, and LIBTCL) may be overridden via the environment
# prior to running nmake in order to match the actual installed location and
# version on this machine.
#
!IFNDEF TCLINCDIR

# know the specific version we want to use.  This variable (TCLSH_CMD) may be
# overridden via the environment prior to running nmake in order to select a
# specific Tcl shell to use.
#
!IFNDEF TCLSH_CMD
TCLSH_CMD = tclsh85
!ENDIF
# <</mark>>

# Compiler options needed for programs that use the readline() library.
#
!IFNDEF READLINE_FLAGS
READLINE_FLAGS = -DHAVE_READLINE=0
!ENDIF

# If symbols are enabled (or compiling for debugging), enable PDBs.
#
!IF $(DEBUG)>1 || $(SYMBOLS)!=0
TCC = $(TCC) -Zi
BCC = $(BCC) -Zi
!ENDIF

# <<mark>>
# If ICU support is enabled, add the compiler options for it.
#
!IF $(USE_ICU)!=0
TCC = $(TCC) -DSQLITE_ENABLE_ICU=1
RCC = $(RCC) -DSQLITE_ENABLE_ICU=1
TCC = $(TCC) -I$(TOP)\ext\icu
RCC = $(RCC) -I$(TOP)\ext\icu
TCC = $(TCC) -I$(ICUINCDIR)
RCC = $(RCC) -I$(ICUINCDIR)
!ENDIF
# <</mark>>

# Command line prefixes for compiling code, compiling resources,
# linking, etc.
#
LTCOMPILE = $(TCC) -Fo$@
LTRCOMPILE = $(RCC) -r
LTLIB = lib.exe

LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(WP81LIBPATH)"
!ENDIF
LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE
LTLINKOPTS = $(LTLINKOPTS) WindowsPhoneCore.lib RuntimeObject.lib PhoneAppModelHost.lib
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:kernel32.lib /NODEFAULTLIB:ole32.lib
!ENDIF

# When compiling for UAP or the Windows 10 platform, some extra linker
# options are also required.
#
!IF $(FOR_UAP)!=0 || $(FOR_WIN10)!=0
LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE /NODEFAULTLIB:kernel32.lib
LTLINKOPTS = $(LTLINKOPTS) mincore.lib
!IFDEF PSDKLIBPATH
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(PSDKLIBPATH)"
!ENDIF
!ENDIF

!IF $(FOR_WIN10)!=0
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(UCRTLIBPATH)"
!IF $(DEBUG)>1
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrtd.lib /DEFAULTLIB:ucrtd.lib
!ELSE
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrt.lib /DEFAULTLIB:ucrt.lib
!ENDIF
!ENDIF

# If either debugging or symbols are enabled, enable PDBs.
#
!IF $(DEBUG)>1 || $(SYMBOLS)!=0
LDFLAGS = /DEBUG $(LDOPTS)
!ELSE
LDFLAGS = $(LDOPTS)
!ENDIF

# <<mark>>
# Start with the Tcl related linker options.
#
!IF $(NO_TCL)==0
LTLIBPATHS = /LIBPATH:$(TCLLIBDIR)
LTLIBS = $(LIBTCL)
!ENDIF

# If ICU support is enabled, add the linker options for it.
#
!IF $(USE_ICU)!=0
LTLIBPATHS = $(LTLIBPATHS) /LIBPATH:$(ICULIBDIR)
LTLIBS = $(LTLIBS) $(LIBICU)
!ENDIF
# <</mark>>

# You should not have to change anything below this line
###############################################################################

# <<mark>>
# Object files for the SQLite library (non-amalgamation).
#
LIBOBJS0 = vdbe.lo parse.lo alter.lo analyze.lo attach.lo auth.lo \
         backup.lo bitvec.lo btmutex.lo btree.lo build.lo \
         callback.lo complete.lo ctime.lo date.lo dbstat.lo delete.lo \
         expr.lo fault.lo fkey.lo \
         fts3.lo fts3_aux.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo \

         pager.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \
         random.lo resolve.lo rowset.lo rtree.lo select.lo sqlite3rbu.lo status.lo \
         table.lo threads.lo tokenize.lo treeview.lo trigger.lo \
         update.lo util.lo vacuum.lo \
         vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbesort.lo \
         vdbetrace.lo wal.lo walker.lo where.lo wherecode.lo whereexpr.lo \
         utf.lo vtab.lo
# <</mark>>

# Object files for the amalgamation.
#
LIBOBJS1 = sqlite3.lo

# Determine the real value of LIBOBJ based on the 'configure' script
#
# <<mark>>
!IF $(USE_AMALGAMATION)==0
LIBOBJ = $(LIBOBJS0)
!ELSE
# <</mark>>
LIBOBJ = $(LIBOBJS1)
# <<mark>>
!ENDIF
# <</mark>>

# Determine if embedded resource compilation and usage are enabled.
#
!IF $(USE_RC)!=0
LIBRESOBJS = sqlite3res.lo
!ELSE
LIBRESOBJS =
!ENDIF

# <<mark>>
# All of the source code files.
#
SRC1 = \
  $(TOP)\src\alter.c \
  $(TOP)\src\analyze.c \
  $(TOP)\src\attach.c \
  $(TOP)\src\auth.c \

# Databases containing fuzzer test cases
#
FUZZDATA = \
  $(TOP)\test\fuzzdata1.db \
  $(TOP)\test\fuzzdata2.db \
  $(TOP)\test\fuzzdata3.db \
  $(TOP)\test\fuzzdata4.db
# <</mark>>

# Additional compiler options for the shell.  These are only effective
# when the shell is not being dynamically linked.
#
!IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_SHELL_JSON1 -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS5
!ENDIF

# <<mark>>
# Extra compiler options for various test tools.
#
MPTESTER_COMPILE_OPTS = -DSQLITE_SHELL_JSON1 -DSQLITE_ENABLE_FTS5
FUZZERSHELL_COMPILE_OPTS = -DSQLITE_ENABLE_JSON1
FUZZCHECK_COMPILE_OPTS = -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_MEMSYS5

# Standard options to testfixture.
#
TESTOPTS = --verbose=file --output=test-out.txt

# Extra targets for the "all" target that require Tcl.
#
!IF $(NO_TCL)==0
ALL_TCL_TARGETS = libtclsqlite3.lib
!ELSE
ALL_TCL_TARGETS =
!ENDIF
# <</mark>>

# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
all:	dll libsqlite3.lib shell $(ALL_TCL_TARGETS)

# Dynamic link library section.
#
dll: $(SQLITE3DLL)

# Shell executable.
#
shell: $(SQLITE3EXE)

libsqlite3.lib:	$(LIBOBJ)
	$(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS)

# <<mark>>
libtclsqlite3.lib:	tclsqlite.lo libsqlite3.lib
	$(LTLIB) $(LTLIBOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCLSTUB) $(TLIBS)
# <</mark>>

$(SQLITE3DLL): $(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP)
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

# <<mark>>
sqlite3.def: libsqlite3.lib
	echo EXPORTS > sqlite3.def
	dumpbin /all libsqlite3.lib \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl include "^\s+1 _?(sqlite3_.*)$$" \1 \
		| sort >> sqlite3.def
# <</mark>>

$(SQLITE3EXE):	$(TOP)\src\shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H)
	$(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) $(TOP)\src\shell.c $(SHELL_CORE_SRC) \
		/link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)

# <<mark>>
sqldiff.exe:	$(TOP)\tool\sqldiff.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(TOP)\tool\sqldiff.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

srcck1.exe:	$(TOP)\tool\srcck1.c
	$(BCC) $(NO_WARN) -Fe$@ $(TOP)\tool\srcck1.c

sourcetest:	srcck1.exe sqlite3.c
	srcck1.exe sqlite3.c

fuzzershell.exe:	$(TOP)\tool\fuzzershell.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(FUZZERSHELL_COMPILE_OPTS) $(TOP)\tool\fuzzershell.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

fuzzcheck.exe:	$(TOP)\test\fuzzcheck.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(FUZZCHECK_COMPILE_OPTS) $(TOP)\test\fuzzcheck.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

sqlite3.c:	.target_source sqlite3ext.h $(TOP)\tool\mksqlite3c.tcl
	$(TCLSH_CMD) $(TOP)\tool\mksqlite3c.tcl $(MKSQLITE3C_ARGS)
	copy tsrc\shell.c .

sqlite3-all.c:	sqlite3.c $(TOP)\tool\split-sqlite3c.tcl
	$(TCLSH_CMD) $(TOP)\tool\split-sqlite3c.tcl
# <</mark>>

# Rule to build the amalgamation
#
sqlite3.lo:	$(SQLITE3C)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C)

# <<mark>>
# Rules to build the LEMON compiler generator
#
lempar.c:	$(TOP)\tool\lempar.c
	copy $(TOP)\tool\lempar.c .

lemon.exe:	$(TOP)\tool\lemon.c lempar.c
	$(BCC) $(NO_WARN) -Daccess=_access \
		-Fe$@ $(TOP)\tool\lemon.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS)

# Rules to build individual *.lo files from generated *.c files. This
# applies to:
#
#     parse.lo
#     opcodes.lo
#
parse.lo:	parse.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c parse.c

opcodes.lo:	opcodes.c
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c opcodes.c
# <</mark>>

# Rule to build the Win32 resources object file.
#
!IF $(USE_RC)!=0
# <<block1>>
$(LIBRESOBJS):	$(TOP)\src\sqlite3.rc $(SQLITE3H)
	echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h
	for /F %%V in ('type "$(TOP)\VERSION"') do ( \
		echo #define SQLITE_RESOURCE_VERSION %%V \
			| $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact . ^, >> sqlite3rc.h \
	)
	echo #endif >> sqlite3rc.h
	$(LTRCOMPILE) -fo $(LIBRESOBJS) $(TOP)\src\sqlite3.rc
# <</block1>>
!ENDIF

# <<mark>>
# Rules to build individual *.lo files from files in the src directory.
#
alter.lo:	$(TOP)\src\alter.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\alter.c

analyze.lo:	$(TOP)\src\analyze.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\analyze.c

	.\fuzzcheck.exe $(FUZZDATA)

fastfuzztest:	fuzzcheck.exe
	.\fuzzcheck.exe --limit-mem 100M $(FUZZDATA)

# Minimal testing that runs in less than 3 minutes (on a fast machine)
#
quicktest:	testfixture.exe sourcetest
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\extraquick.test $(TESTOPTS)

# This is the common case.  Run many tests that do not take too long,
# including fuzzcheck, sqlite3_analyzer, and sqldiff tests.
#
test:	$(TESTPROGS) sourcetest fastfuzztest
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\veryquick.test $(TESTOPTS)

smoketest:	$(TESTPROGS)
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\main.test $(TESTOPTS)

speedtest1.exe:	$(TOP)\test\speedtest1.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
		$(TOP)\test\speedtest1.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

rbu.exe: $(TOP)\ext\rbu\rbu.c $(TOP)\ext\rbu\sqlite3rbu.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_ENABLE_RBU -Fe$@ \
		$(TOP)\ext\rbu\rbu.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)
# <</mark>>

clean:
	del /Q *.exp *.lo *.ilk *.lib *.obj *.ncb *.pdb *.sdf *.suo 2>NUL
	del /Q *.bsc *.cod *.da *.bb *.bbg *.vc gmon.out 2>NUL
# <<mark>>
	del /Q $(SQLITE3C) $(SQLITE3H) opcodes.c opcodes.h 2>NUL
	del /Q lemon.* lempar.c parse.* 2>NUL
	del /Q mkkeywordhash.* keywordhash.h 2>NUL
	del /Q notasharedlib.* 2>NUL
	-rmdir /Q/S .deps 2>NUL
	-rmdir /Q/S .libs 2>NUL
	-rmdir /Q/S quota2a 2>NUL
	-rmdir /Q/S quota2b 2>NUL
	-rmdir /Q/S quota2c 2>NUL
	-rmdir /Q/S tsrc 2>NUL
	del /Q .target_source 2>NUL
	del /Q tclsqlite3.exe 2>NUL
	del /Q testloadext.dll 2>NUL
	del /Q testfixture.exe test.db 2>NUL
	del /Q LogEst.exe fts3view.exe rollback-test.exe showdb.exe 2>NUL
	del /Q showjournal.exe showstat4.exe showwal.exe speedtest1.exe 2>NUL
	del /Q mptester.exe wordcount.exe rbu.exe srcck1.exe 2>NUL
	del /Q $(SQLITE3EXE) $(SQLITE3DLL) sqlite3.def 2>NUL
	del /Q sqlite3.c sqlite3-*.c 2>NUL
	del /Q sqlite3rc.h 2>NUL
	del /Q shell.c sqlite3ext.h 2>NUL
	del /Q sqlite3_analyzer.exe sqlite3_analyzer.c 2>NUL
	del /Q sqlite-*-output.vsix 2>NUL
	del /Q fuzzershell.exe fuzzcheck.exe sqldiff.exe 2>NUL
	del /Q fts5.* fts5parse.* 2>NUL
# <</mark>>

EXTRA_sqlite3_SOURCES = sqlite3.c
sqlite3_LDADD = @EXTRA_SHELL_OBJ@ @READLINE_LIBS@
sqlite3_DEPENDENCIES = @EXTRA_SHELL_OBJ@
sqlite3_CFLAGS = $(AM_CFLAGS)

include_HEADERS = sqlite3.h sqlite3ext.h

EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt
pkgconfigdir = ${libdir}/pkgconfig
pkgconfig_DATA = sqlite3.pc

man_MANS = sqlite3.1

#### DO NOT EDIT ####
# This makefile is automatically generated from the Makefile.msc at
# the root of the canonical SQLite source tree (not the
# amalgamation tarball) using the tool/mkmsvcmin.tcl
# script.
#

#
# nmake Makefile for SQLite
#
###############################################################################
############################## START OF OPTIONS ###############################
###############################################################################

# The toplevel directory of the source tree.  This is the directory
# that contains this "Makefile.msc".
#
TOP = .


# Set this non-0 to enable full warnings (-W4, etc) when compiling.
#
!IFNDEF USE_FULLWARN
USE_FULLWARN = 0
!ENDIF

# Set this non-0 to use "stdcall" calling convention for the core library
# and shell executable.
#
!IFNDEF USE_STDCALL
USE_STDCALL = 0
!ENDIF

# Set this non-0 to have the shell executable link against the core dynamic
# link library.
#
!IFNDEF DYNAMIC_SHELL
DYNAMIC_SHELL = 0
!ENDIF

# Set this non-0 to enable extra code that attempts to detect misuse of the
# SQLite API.
#
!IFNDEF API_ARMOR
API_ARMOR = 0
!ENDIF

# If necessary, create a list of harmless compiler warnings to disable when
# compiling the various tools.  For the SQLite source code itself, warnings,
# if any, will be disabled from within it.
#
!IFNDEF NO_WARN
!IF $(USE_FULLWARN)!=0
NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206
NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4305 -wd4306 -wd4702 -wd4706
!ENDIF
!ENDIF

# Set this non-0 to use the library paths and other options necessary for
# Windows Phone 8.1.
#
!IFNDEF USE_WP81_OPTS
USE_WP81_OPTS = 0
!ENDIF

# Set this non-0 to split the SQLite amalgamation file into chunks to
# be used for debugging with Visual Studio.
#
!IFNDEF SPLIT_AMALGAMATION
SPLIT_AMALGAMATION = 0
!ENDIF


# Set this non-0 to dynamically link to the MSVC runtime library.
#
!IFNDEF USE_CRT_DLL
USE_CRT_DLL = 0
!ENDIF

# Set this non-0 to link to the RPCRT4 library.
#
!IFNDEF USE_RPCRT4_LIB
USE_RPCRT4_LIB = 0
!ENDIF

# Set this non-0 to generate assembly code listings for the source code
# files.
#
!IFNDEF USE_LISTINGS
USE_LISTINGS = 0
!ENDIF

# Set this non-0 to attempt setting the native compiler automatically
# for cross-compiling the command line tools needed during the compilation
# process.
#
!IFNDEF XCOMPILE
XCOMPILE = 0
!ENDIF

# Set this non-0 to use the native libraries paths for cross-compiling
# the command line tools needed during the compilation process.
#
!IFNDEF USE_NATIVE_LIBPATHS
USE_NATIVE_LIBPATHS = 0
!ENDIF

# Set this 0 to skip the compiling and embedding of version resources.
#
!IFNDEF USE_RC
USE_RC = 1
!ENDIF

# Set this non-0 to compile binaries suitable for the WinRT environment.
# This setting does not apply to any binaries that require Tcl to operate
# properly (i.e. the text fixture, etc).
#
!IFNDEF FOR_WINRT
FOR_WINRT = 0
!ENDIF

# Set this non-0 to compile binaries suitable for the UAP environment.
# This setting does not apply to any binaries that require Tcl to operate
# properly (i.e. the text fixture, etc).
#
!IFNDEF FOR_UAP
FOR_UAP = 0
!ENDIF

# Set this non-0 to compile binaries suitable for the Windows 10 platform.
#
!IFNDEF FOR_WIN10
FOR_WIN10 = 0
!ENDIF


# Set this to non-0 to create and use PDBs.
#
!IFNDEF SYMBOLS
SYMBOLS = 1
!ENDIF

# Set this to non-0 to use the SQLite debugging heap subsystem.
#
!IFNDEF MEMDEBUG
MEMDEBUG = 0
!ENDIF

# Set this to non-0 to use the Win32 native heap subsystem.
#
!IFNDEF WIN32HEAP
WIN32HEAP = 0
!ENDIF

# Set this to non-0 to enable OSTRACE() macros, which can be useful when
# debugging.
#
!IFNDEF OSTRACE
OSTRACE = 0
!ENDIF

# Set this to one of the following values to enable various debugging
# features.  Each level includes the debugging options from the previous
# levels.  Currently, the recognized values for DEBUG are:
#
# 0 == NDEBUG: Disables assert() and other runtime diagnostics.
# 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API.
# 2 == Disables NDEBUG and all optimizations and then enables PDBs.
# 3 == SQLITE_DEBUG: Enables various diagnostics messages and code.
# 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call.
# 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros.
# 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros.
#
!IFNDEF DEBUG
DEBUG = 0
!ENDIF

# Enable use of available compiler optimizations?  Normally, this should be
# non-zero.  Setting this to zero, thus disabling all compiler optimizations,
# can be useful for testing.
#
!IFNDEF OPTIMIZATIONS
OPTIMIZATIONS = 2
!ENDIF

# Set the source code file to be used by executables and libraries when
# they need the amalgamation.
#
!IFNDEF SQLITE3C
!IF $(SPLIT_AMALGAMATION)!=0
SQLITE3C = sqlite3-all.c
!ELSE
SQLITE3C = sqlite3.c
!ENDIF
!ENDIF

# Set the include code file to be used by executables and libraries when
# they need SQLite.
#
!IFNDEF SQLITE3H
SQLITE3H = sqlite3.h
!ENDIF

# This is the name to use for the SQLite dynamic link library (DLL).
#
!IFNDEF SQLITE3DLL
SQLITE3DLL = sqlite3.dll
!ENDIF

# This is the name to use for the SQLite import library (LIB).
#
!IFNDEF SQLITE3LIB
SQLITE3LIB = sqlite3.lib
!ENDIF

# This is the name to use for the SQLite shell executable (EXE).
#
!IFNDEF SQLITE3EXE
SQLITE3EXE = sqlite3.exe
!ENDIF

# This is the argument used to set the program database (PDB) file for the
# SQLite shell executable (EXE).
#
!IFNDEF SQLITE3EXEPDB
SQLITE3EXEPDB = /pdb:sqlite3sh.pdb
!ENDIF

# These are the "standard" SQLite compilation options used when compiling for
# the Windows platform.
#
!IFNDEF OPT_FEATURE_FLAGS
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1
!ENDIF

# These are the "extended" SQLite compilation options used when compiling for
# the Windows 10 platform.
#
!IFNDEF EXT_FEATURE_FLAGS
!IF $(FOR_WIN10)!=0
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1
!ELSE
EXT_FEATURE_FLAGS =
!ENDIF
!ENDIF

###############################################################################
############################### END OF OPTIONS ################################
###############################################################################

# When compiling for the Windows 10 platform, the PLATFORM macro must be set
# to an appropriate value (e.g. x86, x64, arm, arm64, etc).
#
!IF $(FOR_WIN10)!=0
!IFNDEF PLATFORM
!ERROR Using the FOR_WIN10 option requires a value for PLATFORM.
!ENDIF
!ENDIF

# This assumes that MSVC is always installed in 32-bit Program Files directory
# and sets the variable for use in locating other 32-bit installs accordingly.
#
PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\..
PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\)

# Check for the predefined command macro CC.  This should point to the compiler
# binary for the target platform.  If it is not defined, simply define it to
# the legacy default value 'cl.exe'.
#
!IFNDEF CC
CC = cl.exe
!ENDIF

# Check for the command macro LD.  This should point to the linker binary for
# the target platform.  If it is not defined, simply define it to the legacy
# default value 'link.exe'.
#
!IFNDEF LD
LD = link.exe
!ENDIF

# Check for the predefined command macro RC.  This should point to the resource
# compiler binary for the target platform.  If it is not defined, simply define
# it to the legacy default value 'rc.exe'.
#
!IFNDEF RC
RC = rc.exe
!ENDIF

# Check for the MSVC runtime library path macro.  Otherwise, this value will
# default to the 'lib' directory underneath the MSVC installation directory.
#
!IFNDEF CRTLIBPATH
CRTLIBPATH = $(VCINSTALLDIR)\lib
!ENDIF

CRTLIBPATH = $(CRTLIBPATH:\\=\)

# Check for the command macro NCC.  This should point to the compiler binary
# for the platform the compilation process is taking place on.  If it is not
# defined, simply define it to have the same value as the CC macro.  When
# cross-compiling, it is suggested that this macro be modified via the command
# line (since nmake itself does not provide a built-in method to guess it).
# For example, to use the x86 compiler when cross-compiling for x64, a command
# line similar to the following could be used (all on one line):
#
#     nmake /f Makefile.msc sqlite3.dll
#           XCOMPILE=1 USE_NATIVE_LIBPATHS=1
#
# Alternatively, the full path and file name to the compiler binary for the
# platform the compilation process is taking place may be specified (all on
# one line):
#
#     nmake /f Makefile.msc sqlite3.dll
#           "NCC=""%VCINSTALLDIR%\bin\cl.exe"""
#           USE_NATIVE_LIBPATHS=1
#
!IFDEF NCC
NCC = $(NCC:\\=\)
!ELSEIF $(XCOMPILE)!=0
NCC = "$(VCINSTALLDIR)\bin\$(CC)"
NCC = $(NCC:\\=\)
!ELSE
NCC = $(CC)
!ENDIF

# Check for the MSVC native runtime library path macro.  Otherwise,
# this value will default to the 'lib' directory underneath the MSVC
# installation directory.
#
!IFNDEF NCRTLIBPATH
NCRTLIBPATH = $(VCINSTALLDIR)\lib
!ENDIF

NCRTLIBPATH = $(NCRTLIBPATH:\\=\)

# Check for the Platform SDK library path macro.  Otherwise, this
# value will default to the 'lib' directory underneath the Windows
# SDK installation directory (the environment variable used appears
# to be available when using Visual C++ 2008 or later via the
# command line).
#
!IFNDEF NSDKLIBPATH
NSDKLIBPATH = $(WINDOWSSDKDIR)\lib
!ENDIF

NSDKLIBPATH = $(NSDKLIBPATH:\\=\)

# Check for the UCRT library path macro.  Otherwise, this value will
# default to the version-specific, platform-specific 'lib' directory
# underneath the Windows SDK installation directory.
#
!IFNDEF UCRTLIBPATH
UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM)
!ENDIF

UCRTLIBPATH = $(UCRTLIBPATH:\\=\)

# C compiler and options for use in building executables that
# will run on the platform that is doing the build.
#
!IF $(USE_FULLWARN)!=0
BCC = $(NCC) -nologo -W4 $(CCOPTS) $(BCCOPTS)
!ELSE
BCC = $(NCC) -nologo -W3 $(CCOPTS) $(BCCOPTS)
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
BCC = $(BCC) -FAcs
!ENDIF

# Check if the native library paths should be used when compiling
# the command line tools used during the compilation process.  If
# so, set the necessary macro now.
#
!IF $(USE_NATIVE_LIBPATHS)!=0
NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)"

!IFDEF NUCRTLIBPATH
NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\)
NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)"
!ENDIF
!ENDIF

# C compiler and options for use in building executables that
# will run on the target platform.  (BCC and TCC are usually the
# same unless your are cross-compiling.)
#
!IF $(USE_FULLWARN)!=0
TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS)
!ELSE
TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS)
!ENDIF

TCC = $(TCC) -DSQLITE_OS_WIN=1 -I$(TOP) -fp:precise
RCC = $(RC) -DSQLITE_OS_WIN=1 -I$(TOP) $(RCOPTS) $(RCCOPTS)

# Adjust the names of the primary targets for use with Windows 10.
#
!IF $(FOR_WIN10)!=0
SQLITE3DLL = winsqlite3.dll
SQLITE3LIB = winsqlite3.lib
SQLITE3EXE = winsqlite3shell.exe
SQLITE3EXEPDB =
!ENDIF

# Check if we want to use the "stdcall" calling convention when compiling.
# This is not supported by the compilers for non-x86 platforms.  It should
# also be noted here that building any target with these "stdcall" options
# will most likely fail if the Tcl library is also required.  This is due
# to how the Tcl library functions are declared and exported (i.e. without
# an explicit calling convention, which results in "cdecl").
#
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
!IF "$(PLATFORM)"=="x86"
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
!ELSE
!IFNDEF PLATFORM
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF
!ENDIF
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
!ENDIF

# These are additional compiler options used for the core library.
#
!IFNDEF CORE_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
!ELSE
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
!ENDIF
!ENDIF

# These are the additional targets that the core library should depend on
# when linking.
#
!IFNDEF CORE_LINK_DEP
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
CORE_LINK_DEP =
!ELSE
CORE_LINK_DEP =
!ENDIF
!ENDIF

# These are additional linker options used for the core library.
#
!IFNDEF CORE_LINK_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
CORE_LINK_OPTS =
!ELSE
CORE_LINK_OPTS =
!ENDIF
!ENDIF

# These are additional compiler options used for the shell executable.
#
!IFNDEF SHELL_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)
!ELSE
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)
!ENDIF
!ENDIF

# This is the source code that the shell executable should be compiled
# with.
#
!IFNDEF SHELL_CORE_SRC
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_SRC =
!ELSE
SHELL_CORE_SRC = $(SQLITE3C)
!ENDIF
!ENDIF

# This is the core library that the shell executable should depend on.
#
!IFNDEF SHELL_CORE_DEP
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_DEP = $(SQLITE3DLL)
!ELSE
SHELL_CORE_DEP =
!ENDIF
!ENDIF

# This is the core library that the shell executable should link with.
#
!IFNDEF SHELL_CORE_LIB
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_LIB = $(SQLITE3LIB)
!ELSE
SHELL_CORE_LIB =
!ENDIF
!ENDIF

# These are additional linker options used for the shell executable.
#
!IFNDEF SHELL_LINK_OPTS
SHELL_LINK_OPTS = $(SHELL_CORE_LIB)
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
TCC = $(TCC) -FAcs
!ENDIF

# When compiling the library for use in the WinRT environment,
# the following compile-time options must be used as well to
# disable use of Win32 APIs that are not available and to enable
# use of Win32 APIs that are specific to Windows 8 and/or WinRT.
#
!IF $(FOR_WINRT)!=0
TCC = $(TCC) -DSQLITE_OS_WINRT=1
RCC = $(RCC) -DSQLITE_OS_WINRT=1
TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP
RCC = $(RCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP
!ENDIF

# C compiler options for the Windows 10 platform (needs MSVC 2015).
#
!IF $(FOR_WIN10)!=0
TCC = $(TCC) /guard:cf -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
BCC = $(BCC) /guard:cf -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
!ENDIF

# Also, we need to dynamically link to the correct MSVC runtime
# when compiling for WinRT (e.g. debug or release) OR if the
# USE_CRT_DLL option is set to force dynamically linking to the
# MSVC runtime library.
#
!IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0
!IF $(DEBUG)>1
TCC = $(TCC) -MDd
BCC = $(BCC) -MDd
!ELSE
TCC = $(TCC) -MD
BCC = $(BCC) -MD
!ENDIF
!ELSE
!IF $(DEBUG)>1
TCC = $(TCC) -MTd
BCC = $(BCC) -MTd
!ELSE
TCC = $(TCC) -MT
BCC = $(BCC) -MT
!ENDIF
!ENDIF


# Define -DNDEBUG to compile without debugging (i.e., for production usage)
# Omitting the define will cause extra debugging code to be inserted and
# includes extra comments when "EXPLAIN stmt" is used.
#
!IF $(DEBUG)==0
TCC = $(TCC) -DNDEBUG
BCC = $(BCC) -DNDEBUG
RCC = $(RCC) -DNDEBUG
!ENDIF

!IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0
TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1
RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1
!ENDIF

!IF $(DEBUG)>2
TCC = $(TCC) -DSQLITE_DEBUG=1
RCC = $(RCC) -DSQLITE_DEBUG=1
!ENDIF

!IF $(DEBUG)>4 || $(OSTRACE)!=0
TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
!ENDIF

!IF $(DEBUG)>5
TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1
RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1
!ENDIF

# Prevent warnings about "insecure" MSVC runtime library functions
# being used.
#
TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS

# Prevent warnings about "deprecated" POSIX functions being used.
#
TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS

# Use the SQLite debugging heap subsystem?
#
!IF $(MEMDEBUG)!=0
TCC = $(TCC) -DSQLITE_MEMDEBUG=1
RCC = $(RCC) -DSQLITE_MEMDEBUG=1

# Use native Win32 heap subsystem instead of malloc/free?
#
!ELSEIF $(WIN32HEAP)!=0
TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1

# Validate the heap on every call into the native Win32 heap subsystem?
#
!IF $(DEBUG)>3
TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
!ENDIF
!ENDIF


# Compiler options needed for programs that use the readline() library.
#
!IFNDEF READLINE_FLAGS
READLINE_FLAGS = -DHAVE_READLINE=0
!ENDIF

# The library that programs using readline() must link against.
#
!IFNDEF LIBREADLINE
LIBREADLINE =
!ENDIF

# Should the database engine be compiled threadsafe
#
TCC = $(TCC) -DSQLITE_THREADSAFE=1
RCC = $(RCC) -DSQLITE_THREADSAFE=1

# Do threads override each others locks by default (1), or do we test (-1)
#
TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1
RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1

# Any target libraries which libsqlite must be linked against
#
!IFNDEF TLIBS
TLIBS =
!ENDIF

# Flags controlling use of the in memory btree implementation
#
# SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to
# default to file, 2 to default to memory, and 3 to force temporary
# tables to always be in memory.
#
TCC = $(TCC) -DSQLITE_TEMP_STORE=1
RCC = $(RCC) -DSQLITE_TEMP_STORE=1

# Enable/disable loadable extensions, and other optional features
# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*).
# The same set of OMIT and ENABLE flags should be passed to the
# LEMON parser generator and the mkkeywordhash tool as well.

# These are the required SQLite compilation options used when compiling for
# the Windows platform.
#
REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100

# If we are linking to the RPCRT4 library, enable features that need it.
#
!IF $(USE_RPCRT4_LIB)!=0
REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1
!ENDIF

# Add the required and optional SQLite compilation options into the command
# lines used to invoke the MSVC code and resource compilers.
#
TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)
RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)

# Add in any optional parameters specified on the commane line, e.g.
# nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1"
#
TCC = $(TCC) $(OPTS)
RCC = $(RCC) $(OPTS)

# If compiling for debugging, add some defines.
#
!IF $(DEBUG)>1
TCC = $(TCC) -D_DEBUG
BCC = $(BCC) -D_DEBUG
RCC = $(RCC) -D_DEBUG
!ENDIF

# If optimizations are enabled or disabled (either implicitly or
# explicitly), add the necessary flags.
#
!IF $(DEBUG)>1 || $(OPTIMIZATIONS)==0
TCC = $(TCC) -Od
BCC = $(BCC) -Od
!ELSEIF $(OPTIMIZATIONS)>=3
TCC = $(TCC) -Ox
BCC = $(BCC) -Ox
!ELSEIF $(OPTIMIZATIONS)==2
TCC = $(TCC) -O2
BCC = $(BCC) -O2
!ELSEIF $(OPTIMIZATIONS)==1
TCC = $(TCC) -O1
BCC = $(BCC) -O1
!ENDIF

# If symbols are enabled (or compiling for debugging), enable PDBs.
#
!IF $(DEBUG)>1 || $(SYMBOLS)!=0
TCC = $(TCC) -Zi
BCC = $(BCC) -Zi
!ENDIF


# Command line prefixes for compiling code, compiling resources,
# linking, etc.
#
LTCOMPILE = $(TCC) -Fo$@
LTRCOMPILE = $(RCC) -r
LTLIB = lib.exe
LTLINK = $(TCC) -Fe$@

# If requested, link to the RPCRT4 library.
#
!IF $(USE_RPCRT4_LIB)!=0
LTLINK = $(LTLINK) rpcrt4.lib
!ENDIF

# If a platform was set, force the linker to target that.
# Note that the vcvars*.bat family of batch files typically
# set this for you.  Otherwise, the linker will attempt
# to deduce the binary type based on the object files.
!IFDEF PLATFORM
LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM)
LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM)
!ELSE
LTLINKOPTS = /NOLOGO
LTLIBOPTS = /NOLOGO
!ENDIF

# When compiling for use in the WinRT environment, the following
# linker option must be used to mark the executable as runnable
# only in the context of an application container.
#
!IF $(FOR_WINRT)!=0
LTLINKOPTS = $(LTLINKOPTS) /APPCONTAINER
!IF "$(VISUALSTUDIOVERSION)"=="12.0" || "$(VISUALSTUDIOVERSION)"=="14.0"
!IFNDEF STORELIBPATH
!IF "$(PLATFORM)"=="x86"
STORELIBPATH = $(CRTLIBPATH)\store
!ELSEIF "$(PLATFORM)"=="x64"
STORELIBPATH = $(CRTLIBPATH)\store\amd64
!ELSEIF "$(PLATFORM)"=="ARM"
STORELIBPATH = $(CRTLIBPATH)\store\arm
!ELSE
STORELIBPATH = $(CRTLIBPATH)\store
!ENDIF
!ENDIF
STORELIBPATH = $(STORELIBPATH:\\=\)
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(STORELIBPATH)"
!ENDIF
!ENDIF

# When compiling for Windows Phone 8.1, an extra library path is
# required.
#
!IF $(USE_WP81_OPTS)!=0
!IFNDEF WP81LIBPATH
!IF "$(PLATFORM)"=="x86"
WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\x86
!ELSEIF "$(PLATFORM)"=="ARM"
WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\ARM
!ELSE
WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\x86
!ENDIF
!ENDIF
!ENDIF

# When compiling for Windows Phone 8.1, some extra linker options
# are also required.
#
!IF $(USE_WP81_OPTS)!=0
!IFDEF WP81LIBPATH
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(WP81LIBPATH)"
!ENDIF
LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE
LTLINKOPTS = $(LTLINKOPTS) WindowsPhoneCore.lib RuntimeObject.lib PhoneAppModelHost.lib
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:kernel32.lib /NODEFAULTLIB:ole32.lib
!ENDIF

# When compiling for UAP or the Windows 10 platform, some extra linker
# options are also required.
#
!IF $(FOR_UAP)!=0 || $(FOR_WIN10)!=0
LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE /NODEFAULTLIB:kernel32.lib
LTLINKOPTS = $(LTLINKOPTS) mincore.lib
!IFDEF PSDKLIBPATH
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(PSDKLIBPATH)"
!ENDIF
!ENDIF

!IF $(FOR_WIN10)!=0
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(UCRTLIBPATH)"
!IF $(DEBUG)>1
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrtd.lib /DEFAULTLIB:ucrtd.lib
!ELSE
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrt.lib /DEFAULTLIB:ucrt.lib
!ENDIF
!ENDIF

# If either debugging or symbols are enabled, enable PDBs.
#
!IF $(DEBUG)>1 || $(SYMBOLS)!=0
LDFLAGS = /DEBUG $(LDOPTS)
!ELSE
LDFLAGS = $(LDOPTS)
!ENDIF


# You should not have to change anything below this line
###############################################################################


# Object files for the amalgamation.
#
LIBOBJS1 = sqlite3.lo

# Determine the real value of LIBOBJ based on the 'configure' script
#
LIBOBJ = $(LIBOBJS1)

# Determine if embedded resource compilation and usage are enabled.
#
!IF $(USE_RC)!=0
LIBRESOBJS = sqlite3res.lo
!ELSE
LIBRESOBJS =
!ENDIF


# Additional compiler options for the shell.  These are only effective
# when the shell is not being dynamically linked.
#
!IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_SHELL_JSON1 -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS5
!ENDIF


# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
all:	dll libsqlite3.lib shell

# Dynamic link library section.
#
dll: $(SQLITE3DLL)

# Shell executable.
#
shell: $(SQLITE3EXE)

libsqlite3.lib:	$(LIBOBJ)
	$(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS)


$(SQLITE3DLL): $(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP)
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)


$(SQLITE3EXE):	$(TOP)\shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H)
	$(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) $(TOP)\shell.c $(SHELL_CORE_SRC) \
		/link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)


# Rule to build the amalgamation
#
sqlite3.lo:	$(SQLITE3C)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C)


# Rule to build the Win32 resources object file.
#
!IF $(USE_RC)!=0
_HASHCHAR=^#
!IF ![echo !IFNDEF VERSION > rcver.vc] && \
    ![for /F "delims=" %V in ('type "$(SQLITE3H)" ^| find "$(_HASHCHAR)define SQLITE_VERSION "') do (echo VERSION = ^^%V >> rcver.vc)] && \
    ![echo !ENDIF >> rcver.vc]
!INCLUDE rcver.vc
!ENDIF

RESOURCE_VERSION = $(VERSION:^#=)
RESOURCE_VERSION = $(RESOURCE_VERSION:define=)
RESOURCE_VERSION = $(RESOURCE_VERSION:SQLITE_VERSION=)
RESOURCE_VERSION = $(RESOURCE_VERSION:"=)
RESOURCE_VERSION = $(RESOURCE_VERSION:.=,)

$(LIBRESOBJS):	$(TOP)\sqlite3.rc rcver.vc $(SQLITE3H)
	echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h
	echo #define SQLITE_RESOURCE_VERSION $(RESOURCE_VERSION) >> sqlite3rc.h
	echo #endif >> sqlite3rc.h
	$(LTRCOMPILE) -fo $(LIBRESOBJS) -DRC_VERONLY $(TOP)\sqlite3.rc
!ENDIF


clean:
	del /Q *.exp *.lo *.ilk *.lib *.obj *.ncb *.pdb *.sdf *.suo 2>NUL
	del /Q *.bsc *.cod *.da *.bb *.bbg *.vc gmon.out 2>NUL

This package contains:

 * the SQLite library amalgamation (single file) source code distribution,
 * the shell.c file used to build the sqlite3 shell too, and
 * the sqlite3.h and sqlite3ext.h header files required to link programs
   and sqlite extensions against the installed libary.
 * autoconf/automake installation infrastucture for building on POSIX
   compliant systems.
 * a Makefile.msc and sqlite3.rc for building with Microsoft Visual C++ on
   Windows.

SUMMARY OF HOW TO BUILD
=======================

  Unix:      ./configure; make
  Windows:   nmake /f Makefile.msc

BUILDING ON POSIX
=================

The generic installation instructions for autoconf/automake are found
in the INSTALL file.

The following SQLite specific boolean options are supported:

  --enable-readline           use readline in shell tool   [default=yes]
  --enable-threadsafe         build a thread-safe library  [default=yes]
  --enable-dynamic-extensions support loadable extensions  [default=yes]

The default value for the CFLAGS variable (options passed to the C
compiler) includes debugging symbols in the build, resulting in larger
binaries than are necessary. Override it on the configure command
line like this:

  $ CFLAGS="-Os" ./configure

to produce a smaller installation footprint.

Other SQLite compilation parameters can also be set using CFLAGS. For
example:

  $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure


BUILDING WITH MICROSOFT VISUAL C++
==================================

To compile for Windows using Microsoft Visual C++:

  $ nmake /f Makefile.msc

Using Microsoft Visual C++ 2005 (or later) is recommended.  Several Windows
platform variants may be built by adding additional macros to the NMAKE
command line.

Building for WinRT 8.0
----------------------

  FOR_WINRT=1

Using Microsoft Visual C++ 2012 (or later) is required.  When using the
above, something like the following macro will need to be added to the
NMAKE command line as well:

  "NSDKLIBPATH=%WindowsSdkDir%\..\8.0\lib\win8\um\x86"

Building for WinRT 8.1
----------------------

  FOR_WINRT=1

Using Microsoft Visual C++ 2013 (or later) is required.  When using the
above, something like the following macro will need to be added to the
NMAKE command line as well:

  "NSDKLIBPATH=%WindowsSdkDir%\..\8.1\lib\winv6.3\um\x86"

Building for UAP 10.0
---------------------

  FOR_WINRT=1 FOR_UAP=1

Using Microsoft Visual C++ 2015 (or later) is required.  When using the
above, something like the following macros will need to be added to the
NMAKE command line as well:

  "NSDKLIBPATH=%WindowsSdkDir%\..\10\lib\10.0.10586.0\um\x86"
  "PSDKLIBPATH=%WindowsSdkDir%\..\10\lib\10.0.10586.0\um\x86"
  "NUCRTLIBPATH=%UniversalCRTSdkDir%\..\10\lib\10.0.10586.0\ucrt\x86"

Building for the Windows 10 SDK
-------------------------------

  FOR_WIN10=1

Using Microsoft Visual C++ 2015 (or later) is required.  When using the
above, no other macros should be needed on the NMAKE command line.

Other preprocessor defines
--------------------------

Additionally, preprocessor defines may be specified by using the OPTS macro
on the NMAKE command line.  However, not all possible preprocessor defines
may be specified in this manner as some require the amalgamation to be built
with them enabled (see http://www.sqlite.org/compile.html). For example, the
following will work:

  "OPTS=-DSQLITE_ENABLE_STAT4=1 -DSQLITE_ENABLE_JSON1=1"

However, the following will not compile unless the amalgamation was built
with it enabled:

  "OPTS=-DSQLITE_ENABLE_UPDATE_DELETE_LIMIT=1"

#
AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
  [--enable-threadsafe], [build a thread-safe library [default=yes]])], 
  [], [enable_threadsafe=yes])
THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
if test x"$enable_threadsafe" != "xno"; then
  THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
  AC_SEARCH_LIBS(pthread_create, pthread)
  AC_SEARCH_LIBS(pthread_mutexattr_init, pthread)
fi
AC_SUBST(THREADSAFE_FLAGS)
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------
#   --enable-dynamic-extensions

  SQLITE_THREADSAFE=1
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi


if test "$SQLITE_THREADSAFE" = "1"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pthread_create" >&5
$as_echo_n "checking for library containing pthread_create... " >&6; }
if ${ac_cv_search_pthread_create+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_func_search_save_LIBS=$LIBS
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char pthread_create ();
int
main ()
{
return pthread_create ();
  ;
  return 0;
}
_ACEOF
for ac_lib in '' pthread; do
  if test -z "$ac_lib"; then
    ac_res="none required"
  else
    ac_res=-l$ac_lib
    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
  fi
  if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_search_pthread_create=$ac_res
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext
  if ${ac_cv_search_pthread_create+:} false; then :
  break
fi
done
if ${ac_cv_search_pthread_create+:} false; then :

else
  ac_cv_search_pthread_create=no
fi
rm conftest.$ac_ext
LIBS=$ac_func_search_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_pthread_create" >&5
$as_echo "$ac_cv_search_pthread_create" >&6; }
ac_res=$ac_cv_search_pthread_create
if test "$ac_res" != no; then :
  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"

fi

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pthread_mutexattr_init" >&5
$as_echo_n "checking for library containing pthread_mutexattr_init... " >&6; }
if ${ac_cv_search_pthread_mutexattr_init+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_func_search_save_LIBS=$LIBS
cat confdefs.h - <<_ACEOF >conftest.$ac_ext

else
  SQLITE_THREADSAFE=1
  AC_MSG_RESULT([yes])
fi
AC_SUBST(SQLITE_THREADSAFE)

if test "$SQLITE_THREADSAFE" = "1"; then
  AC_SEARCH_LIBS(pthread_create, pthread)
  AC_SEARCH_LIBS(pthread_mutexattr_init, pthread)
fi

##########
# Do we want to support release
#
AC_ARG_ENABLE(releasemode, 

  pHash = (Fts3Hash *)sqlite3_user_data(context);

  zName = sqlite3_value_text(argv[0]);
  nName = sqlite3_value_bytes(argv[0])+1;

  if( argc==2 ){
#ifdef SQLITE_ENABLE_FTS3_TOKENIZER
    void *pOld;
    int n = sqlite3_value_bytes(argv[1]);
    if( zName==0 || n!=sizeof(pPtr) ){
      sqlite3_result_error(context, "argument type mismatch", -1);
      return;
    }
    pPtr = *(void **)sqlite3_value_blob(argv[1]);
    pOld = sqlite3Fts3HashInsert(pHash, (void *)zName, nName, pPtr);
    if( pOld==pPtr ){
      sqlite3_result_error(context, "out of memory", -1);
      return;
    }
#else
    sqlite3_result_error(context, "fts3tokenize: " 
        "disabled - rebuild with -DSQLITE_ENABLE_FTS3_TOKENIZER", -1
    );
    return;
#endif /* SQLITE_ENABLE_FTS3_TOKENIZER */
  }else
  {
    if( zName ){
      pPtr = sqlite3Fts3HashFind(pHash, zName, nName);
    }
    if( !pPtr ){
      char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName);
      sqlite3_result_error(context, zErr, -1);
      sqlite3_free(zErr);

    sqlite3_result_error(context, zErr, -1);
  }else{
    sqlite3_result_text(context, Tcl_GetString(pRet), -1, SQLITE_TRANSIENT);
  }
  Tcl_DecrRefCount(pRet);
}

#ifdef SQLITE_ENABLE_FTS3_TOKENIZER
static
int registerTokenizer(
  sqlite3 *db, 
  char *zName, 
  const sqlite3_tokenizer_module *p
){
  int rc;

  sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC);
  sqlite3_bind_blob(pStmt, 2, &p, sizeof(p), SQLITE_STATIC);
  sqlite3_step(pStmt);

  return sqlite3_finalize(pStmt);
}
#endif /* SQLITE_ENABLE_FTS3_TOKENIZER */


static
int queryTokenizer(
  sqlite3 *db, 
  char *zName,  
  const sqlite3_tokenizer_module **pp
){

  assert( p1==p2 );
  rc = queryTokenizer(db, "nosuchtokenizer", &p2);
  assert( rc==SQLITE_ERROR );
  assert( p2==0 );
  assert( 0==strcmp(sqlite3_errmsg(db), "unknown tokenizer: nosuchtokenizer") );

  /* Test the storage function */
#ifdef SQLITE_ENABLE_FTS3_TOKENIZER
  rc = registerTokenizer(db, "nosuchtokenizer", p1);
  assert( rc==SQLITE_OK );
  rc = queryTokenizer(db, "nosuchtokenizer", &p2);
  assert( rc==SQLITE_OK );
  assert( p2==p1 );
#endif

  sqlite3_result_text(context, "ok", -1, SQLITE_STATIC);
}

#endif

/*

typedef unsigned char  u8;
typedef unsigned int   u32;
typedef unsigned short u16;
typedef sqlite3_int64 i64;
typedef sqlite3_uint64 u64;

#define ArraySize(x) ((int)(sizeof(x) / sizeof(x[0])))

#define testcase(x)
#define ALWAYS(x) 1
#define NEVER(x) 0

#define MIN(x,y) (((x) < (y)) ? (x) : (y))
#define MAX(x,y) (((x) > (y)) ? (x) : (y))

/*
** Buffer object for the incremental building of string data.
*/
typedef struct Fts5Buffer Fts5Buffer;
struct Fts5Buffer {
  u8 *p;
  int n;
  int nSpace;
};

int sqlite3Fts5BufferSize(int*, Fts5Buffer*, u32);
void sqlite3Fts5BufferAppendVarint(int*, Fts5Buffer*, i64);
void sqlite3Fts5BufferAppendBlob(int*, Fts5Buffer*, u32, const u8*);
void sqlite3Fts5BufferAppendString(int *, Fts5Buffer*, const char*);
void sqlite3Fts5BufferFree(Fts5Buffer*);
void sqlite3Fts5BufferZero(Fts5Buffer*);
void sqlite3Fts5BufferSet(int*, Fts5Buffer*, int, const u8*);
void sqlite3Fts5BufferAppendPrintf(int *, Fts5Buffer*, char *zFmt, ...);

char *sqlite3Fts5Mprintf(int *pRc, const char *zFmt, ...);

#define fts5BufferZero(x)             sqlite3Fts5BufferZero(x)
#define fts5BufferAppendVarint(a,b,c) sqlite3Fts5BufferAppendVarint(a,b,c)
#define fts5BufferFree(a)             sqlite3Fts5BufferFree(a)
#define fts5BufferAppendBlob(a,b,c,d) sqlite3Fts5BufferAppendBlob(a,b,c,d)
#define fts5BufferSet(a,b,c,d)        sqlite3Fts5BufferSet(a,b,c,d)

#define fts5BufferGrow(pRc,pBuf,nn) ( \
  (u32)((pBuf)->n) + (u32)(nn) <= (u32)((pBuf)->nSpace) ? 0 : \
    sqlite3Fts5BufferSize((pRc),(pBuf),(nn)+(pBuf)->n) \
)

/* Write and decode big-endian 32-bit integer values */
void sqlite3Fts5Put32(u8*, int);
int sqlite3Fts5Get32(const u8*);

int sqlite3Fts5PoslistReaderNext(Fts5PoslistReader*);

typedef struct Fts5PoslistWriter Fts5PoslistWriter;
struct Fts5PoslistWriter {
  i64 iPrev;
};
int sqlite3Fts5PoslistWriterAppend(Fts5Buffer*, Fts5PoslistWriter*, i64);
void sqlite3Fts5PoslistSafeAppend(Fts5Buffer*, i64*, i64);

int sqlite3Fts5PoslistNext64(
  const u8 *a, int n,             /* Buffer containing poslist */
  int *pi,                        /* IN/OUT: Offset within a[] */
  i64 *piOff                      /* IN/OUT: Current offset */
);

** Interface to code in fts5_index.c. fts5_index.c contains contains code
** to access the data stored in the %_data table.
*/

typedef struct Fts5Index Fts5Index;
typedef struct Fts5IndexIter Fts5IndexIter;

struct Fts5IndexIter {
  i64 iRowid;
  const u8 *pData;
  int nData;
  u8 bEof;
};

#define sqlite3Fts5IterEof(x) ((x)->bEof)

/*
** Values used as part of the flags argument passed to IndexQuery().
*/
#define FTS5INDEX_QUERY_PREFIX     0x0001   /* Prefix query */
#define FTS5INDEX_QUERY_DESC       0x0002   /* Docs in descending rowid order */
#define FTS5INDEX_QUERY_TEST_NOIDX 0x0004   /* Do not use prefix index */
#define FTS5INDEX_QUERY_SCAN       0x0008   /* Scan query (fts5vocab) */

/* The following are used internally by the fts5_index.c module. They are
** defined here only to make it easier to avoid clashes with the flags
** above. */
#define FTS5INDEX_QUERY_SKIPEMPTY  0x0010
#define FTS5INDEX_QUERY_NOOUTPUT   0x0020

/*
** Create/destroy an Fts5Index object.
*/
int sqlite3Fts5IndexOpen(Fts5Config *pConfig, int bCreate, Fts5Index**, char**);
int sqlite3Fts5IndexClose(Fts5Index *p);

  Fts5IndexIter **ppIter          /* OUT: New iterator object */
);

/*
** The various operations on open token or token prefix iterators opened
** using sqlite3Fts5IndexQuery().
*/

int sqlite3Fts5IterNext(Fts5IndexIter*);
int sqlite3Fts5IterNextFrom(Fts5IndexIter*, i64 iMatch);
i64 sqlite3Fts5IterRowid(Fts5IndexIter*);



/*
** Close an iterator opened by sqlite3Fts5IndexQuery().
*/
void sqlite3Fts5IterClose(Fts5IndexIter*);

/*

int sqlite3Fts5IndexReinit(Fts5Index *p);
int sqlite3Fts5IndexOptimize(Fts5Index *p);
int sqlite3Fts5IndexMerge(Fts5Index *p, int nMerge);

int sqlite3Fts5IndexLoadConfig(Fts5Index *p);



/*
** End of interface to code in fts5_index.c.
**************************************************************************/

/**************************************************************************
** Interface to code in fts5_varint.c. 
*/

    { "snippet",   0, fts5SnippetFunction, 0 },
    { "highlight", 0, fts5HighlightFunction, 0 },
    { "bm25",      0, fts5Bm25Function,    0 },
  };
  int rc = SQLITE_OK;             /* Return code */
  int i;                          /* To iterate through builtin functions */

  for(i=0; rc==SQLITE_OK && i<ArraySize(aBuiltin); i++){
    rc = pApi->xCreateFunction(pApi,
        aBuiltin[i].zFunc,
        aBuiltin[i].pUserData,
        aBuiltin[i].xFunc,
        aBuiltin[i].xDestroy
    );
  }

*/



#include "fts5Int.h"

int sqlite3Fts5BufferSize(int *pRc, Fts5Buffer *pBuf, u32 nByte){
  if( (u32)pBuf->nSpace<nByte ){
    u32 nNew = pBuf->nSpace ? pBuf->nSpace : 64;
    u8 *pNew;
    while( nNew<nByte ){
      nNew = nNew * 2;
    }
    pNew = sqlite3_realloc(pBuf->p, nNew);
    if( pNew==0 ){
      *pRc = SQLITE_NOMEM;
      return 1;
    }else{
      pBuf->nSpace = nNew;
      pBuf->p = pNew;
    }
  }
  return 0;
}


/*
** Encode value iVal as an SQLite varint and append it to the buffer object

){
  memset(pIter, 0, sizeof(*pIter));
  pIter->a = a;
  pIter->n = n;
  sqlite3Fts5PoslistReaderNext(pIter);
  return pIter->bEof;
}

/*
** Append position iPos to the position list being accumulated in buffer
** pBuf, which must be already be large enough to hold the new data.
** The previous position written to this list is *piPrev. *piPrev is set
** to iPos before returning.
*/
void sqlite3Fts5PoslistSafeAppend(
  Fts5Buffer *pBuf, 
  i64 *piPrev, 
  i64 iPos
){
  static const i64 colmask = ((i64)(0x7FFFFFFF)) << 32;
  if( (iPos & colmask) != (*piPrev & colmask) ){
    pBuf->p[pBuf->n++] = 1;
    pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], (iPos>>32));
    *piPrev = (iPos & colmask);
  }
  pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], (iPos-*piPrev)+2);
  *piPrev = iPos;
}

int sqlite3Fts5PoslistWriterAppend(
  Fts5Buffer *pBuf, 
  Fts5PoslistWriter *pWriter,
  i64 iPos
){

  int rc;
  if( fts5BufferGrow(&rc, pBuf, 5+5+5) ) return rc;






  sqlite3Fts5PoslistSafeAppend(pBuf, &pWriter->iPrev, iPos);

  return SQLITE_OK;
}

void *sqlite3Fts5MallocZero(int *pRc, int nByte){
  void *pRet = 0;
  if( *pRc==SQLITE_OK ){
    pRet = sqlite3_malloc(nByte);
    if( pRet==0 && nByte>0 ){

  const char *pTerm, int nTerm, 
  int *pbPresent
){
  int rc = SQLITE_OK;
  *pbPresent = 0;
  if( p ){
    int i;
    u32 hash = 13;
    Fts5TermsetEntry *pEntry;

    /* Calculate a hash value for this term. This is the same hash checksum
    ** used by the fts5_hash.c module. This is not important for correct
    ** operation of the module, but is necessary to ensure that some tests
    ** designed to produce hash table collisions really do work.  */
    for(i=nTerm-1; i>=0; i--){
      hash = (hash << 3) ^ hash ^ pTerm[i];
    }
    hash = (hash << 3) ^ hash ^ iIdx;
    hash = hash % ArraySize(p->apHash);

    for(pEntry=p->apHash[hash]; pEntry; pEntry=pEntry->pNext){
      if( pEntry->iIdx==iIdx 
          && pEntry->nTerm==nTerm 
          && memcmp(pEntry->pTerm, pTerm, nTerm)==0 
      ){
        *pbPresent = 1;
        break;
      }
    }

    if( pEntry==0 ){
      pEntry = sqlite3Fts5MallocZero(&rc, sizeof(Fts5TermsetEntry) + nTerm);

  }

  return rc;
}

void sqlite3Fts5TermsetFree(Fts5Termset *p){
  if( p ){
    u32 i;
    for(i=0; i<ArraySize(p->apHash); i++){
      Fts5TermsetEntry *pEntry = p->apHash[i];
      while( pEntry ){
        Fts5TermsetEntry *pDel = pEntry;
        pEntry = pEntry->pNext;
        sqlite3_free(pDel);
      }

**       FTS5_TERM                (pNear valid)
*/
struct Fts5ExprNode {
  int eType;                      /* Node type */
  int bEof;                       /* True at EOF */
  int bNomatch;                   /* True if entry is not a match */

  /* Next method for this node. */
  int (*xNext)(Fts5Expr*, Fts5ExprNode*, int, i64);

  i64 iRowid;                     /* Current rowid */
  Fts5ExprNearset *pNear;         /* For FTS5_STRING - cluster of phrases */

  /* Child nodes. For a NOT node, this array always contains 2 entries. For 
  ** AND or OR nodes, it contains 2 or more entries.  */
  int nChild;                     /* Number of child nodes */
  Fts5ExprNode *apChild[1];       /* Array of child nodes */
};

#define Fts5NodeIsString(p) ((p)->eType==FTS5_TERM || (p)->eType==FTS5_STRING)

/*
** Invoke the xNext method of an Fts5ExprNode object. This macro should be
** used as if it has the same signature as the xNext() methods themselves.
*/
#define fts5ExprNodeNext(a,b,c,d) (b)->xNext((a), (b), (c), (d))

/*
** An instance of the following structure represents a single search term
** or term prefix.
*/
struct Fts5ExprTerm {
  int bPrefix;                    /* True for a prefix term */
  char *zTerm;                    /* nul-terminated term */

  assert( sParse.rc!=SQLITE_OK || sParse.zErr==0 );
  if( sParse.rc==SQLITE_OK ){
    *ppNew = pNew = sqlite3_malloc(sizeof(Fts5Expr));
    if( pNew==0 ){
      sParse.rc = SQLITE_NOMEM;
      sqlite3Fts5ParseNodeFree(sParse.pExpr);
    }else{
      if( !sParse.pExpr ){
        const int nByte = sizeof(Fts5ExprNode);
        pNew->pRoot = (Fts5ExprNode*)sqlite3Fts5MallocZero(&sParse.rc, nByte);
        if( pNew->pRoot ){
          pNew->pRoot->bEof = 1;
        }
      }else{
        pNew->pRoot = sParse.pExpr;
      }
      pNew->pIndex = 0;
      pNew->pConfig = pConfig;
      pNew->apExprPhrase = sParse.apPhrase;
      pNew->nPhrase = sParse.nPhrase;
      sParse.apPhrase = 0;
    }
  }

  int bRetValid = 0;
  Fts5ExprTerm *p;

  assert( pTerm->pSynonym );
  assert( bDesc==0 || bDesc==1 );
  for(p=pTerm; p; p=p->pSynonym){
    if( 0==sqlite3Fts5IterEof(p->pIter) ){
      i64 iRowid = p->pIter->iRowid;
      if( bRetValid==0 || (bDesc!=(iRowid<iRet)) ){
        iRet = iRowid;
        bRetValid = 1;
      }
    }
  }

  if( pbEof && bRetValid==0 ) *pbEof = 1;
  return iRet;
}

/*
** Argument pTerm must be a synonym iterator.
*/
static int fts5ExprSynonymList(
  Fts5ExprTerm *pTerm, 
  int bCollist, 
  Fts5Colset *pColset,
  i64 iRowid,
  Fts5Buffer *pBuf,               /* Use this buffer for space if required */
  u8 **pa, int *pn
){
  Fts5PoslistReader aStatic[4];
  Fts5PoslistReader *aIter = aStatic;
  int nIter = 0;
  int nAlloc = 4;
  int rc = SQLITE_OK;
  Fts5ExprTerm *p;

  assert( pTerm->pSynonym );
  for(p=pTerm; p; p=p->pSynonym){
    Fts5IndexIter *pIter = p->pIter;
    if( sqlite3Fts5IterEof(pIter)==0 && pIter->iRowid==iRowid ){











      if( pIter->nData==0 ) continue;
      if( nIter==nAlloc ){
        int nByte = sizeof(Fts5PoslistReader) * nAlloc * 2;
        Fts5PoslistReader *aNew = (Fts5PoslistReader*)sqlite3_malloc(nByte);
        if( aNew==0 ){
          rc = SQLITE_NOMEM;
          goto synonym_poslist_out;
        }
        memcpy(aNew, aIter, sizeof(Fts5PoslistReader) * nIter);
        nAlloc = nAlloc*2;
        if( aIter!=aStatic ) sqlite3_free(aIter);
        aIter = aNew;
      }
      sqlite3Fts5PoslistReaderInit(pIter->pData, pIter->nData, &aIter[nIter]);
      assert( aIter[nIter].bEof==0 );
      nIter++;
    }
  }


  if( nIter==1 ){
    *pa = (u8*)aIter[0].a;
    *pn = aIter[0].n;
  }else{
    Fts5PoslistWriter writer = {0};

    i64 iPrev = -1;
    fts5BufferZero(pBuf);
    while( 1 ){
      int i;
      i64 iMin = FTS5_LARGEST_INT64;
      for(i=0; i<nIter; i++){
        if( aIter[i].bEof==0 ){
          if( aIter[i].iPos==iPrev ){
            if( sqlite3Fts5PoslistReaderNext(&aIter[i]) ) continue;
          }
          if( aIter[i].iPos<iMin ){
            iMin = aIter[i].iPos;
          }
        }
      }
      if( iMin==FTS5_LARGEST_INT64 || rc!=SQLITE_OK ) break;
      rc = sqlite3Fts5PoslistWriterAppend(pBuf, &writer, iMin);
      iPrev = iMin;
    }
    if( rc==SQLITE_OK ){


      *pa = pBuf->p;
      *pn = pBuf->n;

    }
  }

 synonym_poslist_out:
  if( aIter!=aStatic ) sqlite3_free(aIter);
  return rc;
}

  int i;
  int rc = SQLITE_OK;
  
  fts5BufferZero(&pPhrase->poslist);

  /* If the aStatic[] array is not large enough, allocate a large array
  ** using sqlite3_malloc(). This approach could be improved upon. */
  if( pPhrase->nTerm>ArraySize(aStatic) ){
    int nByte = sizeof(Fts5PoslistReader) * pPhrase->nTerm;
    aIter = (Fts5PoslistReader*)sqlite3_malloc(nByte);
    if( !aIter ) return SQLITE_NOMEM;
  }
  memset(aIter, 0, sizeof(Fts5PoslistReader) * pPhrase->nTerm);

  /* Initialize a term iterator for each term in the phrase */
  for(i=0; i<pPhrase->nTerm; i++){
    Fts5ExprTerm *pTerm = &pPhrase->aTerm[i];

    int n = 0;
    int bFlag = 0;
    u8 *a = 0;
    if( pTerm->pSynonym ){
      Fts5Buffer buf = {0, 0, 0};
      rc = fts5ExprSynonymList(
          pTerm, 0, pColset, pNode->iRowid, &buf, &a, &n
      );
      if( rc ){
        sqlite3_free(a);
        goto ismatch_out;
      }
      if( a==buf.p ) bFlag = 1;
    }else{
      a = (u8*)pTerm->pIter->pData;
      n = pTerm->pIter->nData;
    }

    sqlite3Fts5PoslistReaderInit(a, n, &aIter[i]);
    aIter[i].bFlag = (u8)bFlag;
    if( aIter[i].bEof ) goto ismatch_out;
  }

  while( 1 ){
    int bMatch;

  memset(p, 0, sizeof(Fts5LookaheadReader));
  p->a = a;
  p->n = n;
  fts5LookaheadReaderNext(p);
  return fts5LookaheadReaderNext(p);
}







typedef struct Fts5NearTrimmer Fts5NearTrimmer;
struct Fts5NearTrimmer {
  Fts5LookaheadReader reader;     /* Input iterator */
  Fts5PoslistWriter writer;       /* Writer context */
  Fts5Buffer *pOut;               /* Output poslist */
};

  int rc = *pRc;
  int bMatch;

  assert( pNear->nPhrase>1 );

  /* If the aStatic[] array is not large enough, allocate a large array
  ** using sqlite3_malloc(). This approach could be improved upon. */
  if( pNear->nPhrase>ArraySize(aStatic) ){
    int nByte = sizeof(Fts5NearTrimmer) * pNear->nPhrase;
    a = (Fts5NearTrimmer*)sqlite3Fts5MallocZero(&rc, nByte);
  }else{
    memset(aStatic, 0, sizeof(aStatic));
  }
  if( rc!=SQLITE_OK ){
    *pRc = rc;

    int bRet = a[0].pOut->n>0;
    *pRc = rc;
    if( a!=aStatic ) sqlite3_free(a);
    return bRet;
  }
}


































































/*
** Advance iterator pIter until it points to a value equal to or laster
** than the initial value of *piLast. If this means the iterator points
** to a value laster than *piLast, update *piLast to the new lastest value.
**
** If the iterator reaches EOF, set *pbEof to true before returning. If
** an error occurs, set *pRc to an error code. If either *pbEof or *pRc
** are set, return a non-zero value. Otherwise, return zero.
*/
static int fts5ExprAdvanceto(
  Fts5IndexIter *pIter,           /* Iterator to advance */
  int bDesc,                      /* True if iterator is "rowid DESC" */
  i64 *piLast,                    /* IN/OUT: Lastest rowid seen so far */
  int *pRc,                       /* OUT: Error code */
  int *pbEof                      /* OUT: Set to true if EOF */
){
  i64 iLast = *piLast;
  i64 iRowid;

  iRowid = pIter->iRowid;
  if( (bDesc==0 && iLast>iRowid) || (bDesc && iLast<iRowid) ){
    int rc = sqlite3Fts5IterNextFrom(pIter, iLast);
    if( rc || sqlite3Fts5IterEof(pIter) ){
      *pRc = rc;
      *pbEof = 1;
      return 1;
    }
    iRowid = pIter->iRowid;
    assert( (bDesc==0 && iRowid>=iLast) || (bDesc==1 && iRowid<=iLast) );
  }
  *piLast = iRowid;

  return 0;
}

static int fts5ExprSynonymAdvanceto(
  Fts5ExprTerm *pTerm,            /* Term iterator to advance */
  int bDesc,                      /* True if iterator is "rowid DESC" */
  i64 *piLast,                    /* IN/OUT: Lastest rowid seen so far */
  int *pRc                        /* OUT: Error code */
){
  int rc = SQLITE_OK;
  i64 iLast = *piLast;
  Fts5ExprTerm *p;
  int bEof = 0;

  for(p=pTerm; rc==SQLITE_OK && p; p=p->pSynonym){
    if( sqlite3Fts5IterEof(p->pIter)==0 ){
      i64 iRowid = p->pIter->iRowid;
      if( (bDesc==0 && iLast>iRowid) || (bDesc && iLast<iRowid) ){
        rc = sqlite3Fts5IterNextFrom(p->pIter, iLast);
      }
    }
  }

  if( rc!=SQLITE_OK ){

  if( pExpr->pConfig->eDetail!=FTS5_DETAIL_FULL ){
    Fts5ExprTerm *pTerm;
    Fts5ExprPhrase *pPhrase = pNear->apPhrase[0];
    pPhrase->poslist.n = 0;
    for(pTerm=&pPhrase->aTerm[0]; pTerm; pTerm=pTerm->pSynonym){
      Fts5IndexIter *pIter = pTerm->pIter;
      if( sqlite3Fts5IterEof(pIter)==0 ){






        if( pIter->iRowid==pNode->iRowid && pIter->nData>0 ){
          pPhrase->poslist.n = 1;
        }
      }
    }
    return pPhrase->poslist.n;
  }else{
    int i;

    /* Check that each phrase in the nearset matches the current row.
    ** Populate the pPhrase->poslist buffers at the same time. If any
    ** phrase is not a match, break out of the loop early.  */
    for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){
      Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
      if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym || pNear->pColset ){
        int bMatch = 0;
        rc = fts5ExprPhraseIsMatch(pNode, pNear->pColset, pPhrase, &bMatch);
        if( bMatch==0 ) break;
      }else{

        Fts5IndexIter *pIter = pPhrase->aTerm[0].pIter;

        fts5BufferSet(&rc, &pPhrase->poslist, pIter->nData, pIter->pData);
      }
    }

    *pRc = rc;
    if( i==pNear->nPhrase && (i==1 || fts5ExprNearIsMatch(pRc, pNear)) ){
      return 1;
    }
    return 0;
  }
}



































































































/*
** Initialize all term iterators in the pNear object. If any term is found
** to match no documents at all, return immediately without initializing any
** further iterators.
*/
static int fts5ExprNearInitAll(
  Fts5Expr *pExpr,
  Fts5ExprNode *pNode
){
  Fts5ExprNearset *pNear = pNode->pNear;
  int i, j;
  int rc = SQLITE_OK;

  assert( pNode->bNomatch==0 );
  for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){
    Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
    for(j=0; j<pPhrase->nTerm; j++){
      Fts5ExprTerm *pTerm = &pPhrase->aTerm[j];
      Fts5ExprTerm *p;
      int bEof = 1;

        return rc;
      }
    }
  }

  return rc;
}





/*
** If pExpr is an ASC iterator, this function returns a value with the
** same sign as:
**
**   (iLhs - iRhs)
**

    return (iLhs < iRhs);
  }
}

static void fts5ExprSetEof(Fts5ExprNode *pNode){
  int i;
  pNode->bEof = 1;
  pNode->bNomatch = 0;
  for(i=0; i<pNode->nChild; i++){
    fts5ExprSetEof(pNode->apChild[i]);
  }
}

static void fts5ExprNodeZeroPoslist(Fts5ExprNode *pNode){
  if( pNode->eType==FTS5_STRING || pNode->eType==FTS5_TERM ){

    for(i=0; i<pNode->nChild; i++){
      fts5ExprNodeZeroPoslist(pNode->apChild[i]);
    }
  }
}



/*
** Compare the values currently indicated by the two nodes as follows:
**
**    res = (*p1) - (*p2)
**
** Nodes that point to values that come later in the iteration order are
** considered to be larger. Nodes at EOF are the largest of all.
**
** This means that if the iteration order is ASC, then numerically larger
** rowids are considered larger. Or if it is the default DESC, numerically
** smaller rowids are larger.
*/
static int fts5NodeCompare(
  Fts5Expr *pExpr,
  Fts5ExprNode *p1, 
  Fts5ExprNode *p2
){
  if( p2->bEof ) return -1;
  if( p1->bEof ) return +1;
  return fts5RowidCmp(pExpr, p1->iRowid, p2->iRowid);
}

/*
** All individual term iterators in pNear are guaranteed to be valid when
** this function is called. This function checks if all term iterators
** point to the same rowid, and if not, advances them until they do.
** If an EOF is reached before this happens, *pbEof is set to true before
** returning.
**
** SQLITE_OK is returned if an error occurs, or an SQLite error code 
** otherwise. It is not considered an error code if an iterator reaches
** EOF.
*/
static int fts5ExprNodeTest_STRING(
  Fts5Expr *pExpr,                /* Expression pPhrase belongs to */
  Fts5ExprNode *pNode
){
  Fts5ExprNearset *pNear = pNode->pNear;
  Fts5ExprPhrase *pLeft = pNear->apPhrase[0];
  int rc = SQLITE_OK;
  i64 iLast;                      /* Lastest rowid any iterator points to */
  int i, j;                       /* Phrase and token index, respectively */
  int bMatch;                     /* True if all terms are at the same rowid */
  const int bDesc = pExpr->bDesc;

  /* Check that this node should not be FTS5_TERM */
  assert( pNear->nPhrase>1 
       || pNear->apPhrase[0]->nTerm>1 
       || pNear->apPhrase[0]->aTerm[0].pSynonym
  );

  /* Initialize iLast, the "lastest" rowid any iterator points to. If the
  ** iterator skips through rowids in the default ascending order, this means
  ** the maximum rowid. Or, if the iterator is "ORDER BY rowid DESC", then it
  ** means the minimum rowid.  */
  if( pLeft->aTerm[0].pSynonym ){
    iLast = fts5ExprSynonymRowid(&pLeft->aTerm[0], bDesc, 0);
  }else{
    iLast = pLeft->aTerm[0].pIter->iRowid;
  }

  do {
    bMatch = 1;
    for(i=0; i<pNear->nPhrase; i++){
      Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
      for(j=0; j<pPhrase->nTerm; j++){
        Fts5ExprTerm *pTerm = &pPhrase->aTerm[j];
        if( pTerm->pSynonym ){
          i64 iRowid = fts5ExprSynonymRowid(pTerm, bDesc, 0);
          if( iRowid==iLast ) continue;
          bMatch = 0;
          if( fts5ExprSynonymAdvanceto(pTerm, bDesc, &iLast, &rc) ){
            pNode->bNomatch = 0;
            pNode->bEof = 1;
            return rc;
          }
        }else{
          Fts5IndexIter *pIter = pPhrase->aTerm[j].pIter;
          if( pIter->iRowid==iLast ) continue;
          bMatch = 0;
          if( fts5ExprAdvanceto(pIter, bDesc, &iLast, &rc, &pNode->bEof) ){
            return rc;
          }
        }
      }
    }
  }while( bMatch==0 );

  pNode->iRowid = iLast;
  pNode->bNomatch = ((0==fts5ExprNearTest(&rc, pExpr, pNode)) && rc==SQLITE_OK);
  assert( pNode->bEof==0 || pNode->bNomatch==0 );

  return rc;
}

/*
** Advance the first term iterator in the first phrase of pNear. Set output
** variable *pbEof to true if it reaches EOF or if an error occurs.
**
** Return SQLITE_OK if successful, or an SQLite error code if an error
** occurs.
*/
static int fts5ExprNodeNext_STRING(
  Fts5Expr *pExpr,                /* Expression pPhrase belongs to */
  Fts5ExprNode *pNode,            /* FTS5_STRING or FTS5_TERM node */
  int bFromValid,
  i64 iFrom 
){
  Fts5ExprTerm *pTerm = &pNode->pNear->apPhrase[0]->aTerm[0];
  int rc = SQLITE_OK;

  pNode->bNomatch = 0;
  if( pTerm->pSynonym ){
    int bEof = 1;
    Fts5ExprTerm *p;

    /* Find the firstest rowid any synonym points to. */
    i64 iRowid = fts5ExprSynonymRowid(pTerm, pExpr->bDesc, 0);

    /* Advance each iterator that currently points to iRowid. Or, if iFrom
    ** is valid - each iterator that points to a rowid before iFrom.  */
    for(p=pTerm; p; p=p->pSynonym){
      if( sqlite3Fts5IterEof(p->pIter)==0 ){
        i64 ii = p->pIter->iRowid;
        if( ii==iRowid 
         || (bFromValid && ii!=iFrom && (ii>iFrom)==pExpr->bDesc) 
        ){
          if( bFromValid ){
            rc = sqlite3Fts5IterNextFrom(p->pIter, iFrom);
          }else{
            rc = sqlite3Fts5IterNext(p->pIter);
          }
          if( rc!=SQLITE_OK ) break;
          if( sqlite3Fts5IterEof(p->pIter)==0 ){
            bEof = 0;
          }
        }else{
          bEof = 0;
        }
      }
    }

    /* Set the EOF flag if either all synonym iterators are at EOF or an
    ** error has occurred.  */
    pNode->bEof = (rc || bEof);
  }else{
    Fts5IndexIter *pIter = pTerm->pIter;

    assert( Fts5NodeIsString(pNode) );
    if( bFromValid ){
      rc = sqlite3Fts5IterNextFrom(pIter, iFrom);
    }else{
      rc = sqlite3Fts5IterNext(pIter);
    }

    pNode->bEof = (rc || sqlite3Fts5IterEof(pIter));
  }

  if( pNode->bEof==0 ){
    assert( rc==SQLITE_OK );
    rc = fts5ExprNodeTest_STRING(pExpr, pNode);
  }

  return rc;
}


static int fts5ExprNodeTest_TERM(
  Fts5Expr *pExpr,                /* Expression that pNear is a part of */
  Fts5ExprNode *pNode             /* The "NEAR" node (FTS5_TERM) */
){
  /* As this "NEAR" object is actually a single phrase that consists 
  ** of a single term only, grab pointers into the poslist managed by the
  ** fts5_index.c iterator object. This is much faster than synthesizing 
  ** a new poslist the way we have to for more complicated phrase or NEAR
  ** expressions.  */
  Fts5ExprPhrase *pPhrase = pNode->pNear->apPhrase[0];
  Fts5IndexIter *pIter = pPhrase->aTerm[0].pIter;

  assert( pNode->eType==FTS5_TERM );
  assert( pNode->pNear->nPhrase==1 && pPhrase->nTerm==1 );
  assert( pPhrase->aTerm[0].pSynonym==0 );

  pPhrase->poslist.n = pIter->nData;
  if( pExpr->pConfig->eDetail==FTS5_DETAIL_FULL ){
    pPhrase->poslist.p = (u8*)pIter->pData;
  }
  pNode->iRowid = pIter->iRowid;
  pNode->bNomatch = (pPhrase->poslist.n==0);
  return SQLITE_OK;
}

/*
** xNext() method for a node of type FTS5_TERM.
*/
static int fts5ExprNodeNext_TERM(
  Fts5Expr *pExpr, 
  Fts5ExprNode *pNode,
  int bFromValid,
  i64 iFrom
){
  int rc;
  Fts5IndexIter *pIter = pNode->pNear->apPhrase[0]->aTerm[0].pIter;

  assert( pNode->bEof==0 );
  if( bFromValid ){
    rc = sqlite3Fts5IterNextFrom(pIter, iFrom);
  }else{
    rc = sqlite3Fts5IterNext(pIter);
  }
  if( rc==SQLITE_OK && sqlite3Fts5IterEof(pIter)==0 ){
    rc = fts5ExprNodeTest_TERM(pExpr, pNode);
  }else{
    pNode->bEof = 1;
    pNode->bNomatch = 0;
  }
  return rc;
}

static void fts5ExprNodeTest_OR(
  Fts5Expr *pExpr,                /* Expression of which pNode is a part */
  Fts5ExprNode *pNode             /* Expression node to test */
){
  Fts5ExprNode *pNext = pNode->apChild[0];
  int i;

  for(i=1; i<pNode->nChild; i++){
    Fts5ExprNode *pChild = pNode->apChild[i];
    int cmp = fts5NodeCompare(pExpr, pNext, pChild);
    if( cmp>0 || (cmp==0 && pChild->bNomatch==0) ){
      pNext = pChild;
    }
  }
  pNode->iRowid = pNext->iRowid;
  pNode->bEof = pNext->bEof;
  pNode->bNomatch = pNext->bNomatch;
}

static int fts5ExprNodeNext_OR(
  Fts5Expr *pExpr, 
  Fts5ExprNode *pNode,
  int bFromValid,
  i64 iFrom
){
  int i;
  i64 iLast = pNode->iRowid;

  for(i=0; i<pNode->nChild; i++){
    Fts5ExprNode *p1 = pNode->apChild[i];
    assert( p1->bEof || fts5RowidCmp(pExpr, p1->iRowid, iLast)>=0 );
    if( p1->bEof==0 ){
      if( (p1->iRowid==iLast) 
       || (bFromValid && fts5RowidCmp(pExpr, p1->iRowid, iFrom)<0)
      ){
        int rc = fts5ExprNodeNext(pExpr, p1, bFromValid, iFrom);
        if( rc!=SQLITE_OK ) return rc;
      }
    }
  }

  fts5ExprNodeTest_OR(pExpr, pNode);
  return SQLITE_OK;
}

/*
** Argument pNode is an FTS5_AND node.
*/
static int fts5ExprNodeTest_AND(
  Fts5Expr *pExpr,                /* Expression pPhrase belongs to */
  Fts5ExprNode *pAnd              /* FTS5_AND node to advance */
){
  int iChild;
  i64 iLast = pAnd->iRowid;
  int rc = SQLITE_OK;
  int bMatch;

  assert( pAnd->bEof==0 );
  do {
    pAnd->bNomatch = 0;
    bMatch = 1;
    for(iChild=0; iChild<pAnd->nChild; iChild++){
      Fts5ExprNode *pChild = pAnd->apChild[iChild];



      int cmp = fts5RowidCmp(pExpr, iLast, pChild->iRowid);
      if( cmp>0 ){
        /* Advance pChild until it points to iLast or laster */
        rc = fts5ExprNodeNext(pExpr, pChild, 1, iLast);
        if( rc!=SQLITE_OK ) return rc;

      }

      /* If the child node is now at EOF, so is the parent AND node. Otherwise,
      ** the child node is guaranteed to have advanced at least as far as
      ** rowid iLast. So if it is not at exactly iLast, pChild->iRowid is the
      ** new lastest rowid seen so far.  */
      assert( pChild->bEof || fts5RowidCmp(pExpr, iLast, pChild->iRowid)<=0 );

  if( pAnd->bNomatch && pAnd!=pExpr->pRoot ){
    fts5ExprNodeZeroPoslist(pAnd);
  }
  pAnd->iRowid = iLast;
  return SQLITE_OK;
}

static int fts5ExprNodeNext_AND(
  Fts5Expr *pExpr, 
  Fts5ExprNode *pNode,
  int bFromValid,
  i64 iFrom
){
  int rc = fts5ExprNodeNext(pExpr, pNode->apChild[0], bFromValid, iFrom);
  if( rc==SQLITE_OK ){
    rc = fts5ExprNodeTest_AND(pExpr, pNode);
  }



  return rc;
}








static int fts5ExprNodeTest_NOT(
  Fts5Expr *pExpr,                /* Expression pPhrase belongs to */
  Fts5ExprNode *pNode             /* FTS5_NOT node to advance */
){
  int rc = SQLITE_OK;
  Fts5ExprNode *p1 = pNode->apChild[0];
  Fts5ExprNode *p2 = pNode->apChild[1];

  assert( pNode->nChild==2 );



  while( rc==SQLITE_OK && p1->bEof==0 ){
    int cmp = fts5NodeCompare(pExpr, p1, p2);
    if( cmp>0 ){
      rc = fts5ExprNodeNext(pExpr, p2, 1, p1->iRowid);
      cmp = fts5NodeCompare(pExpr, p1, p2);
    }

    assert( rc!=SQLITE_OK || cmp<=0 );
    if( cmp || p2->bNomatch ) break;
    rc = fts5ExprNodeNext(pExpr, p1, 0, 0);
  }
  pNode->bEof = p1->bEof;

  pNode->bNomatch = p1->bNomatch;
  pNode->iRowid = p1->iRowid;
  if( p1->bEof ){
    fts5ExprNodeZeroPoslist(p2);
  }
  return rc;
}


static int fts5ExprNodeNext_NOT(
  Fts5Expr *pExpr, 
  Fts5ExprNode *pNode,
  int bFromValid,
  i64 iFrom
){




















































  int rc = fts5ExprNodeNext(pExpr, pNode->apChild[0], bFromValid, iFrom);




  if( rc==SQLITE_OK ){
    rc = fts5ExprNodeTest_NOT(pExpr, pNode);
  }














  return rc;
}


/*
** If pNode currently points to a match, this function returns SQLITE_OK
** without modifying it. Otherwise, pNode is advanced until it does point
** to a match or EOF is reached.
*/
static int fts5ExprNodeTest(
  Fts5Expr *pExpr,                /* Expression of which pNode is a part */
  Fts5ExprNode *pNode             /* Expression node to test */
){
  int rc = SQLITE_OK;
  if( pNode->bEof==0 ){
    switch( pNode->eType ){

      case FTS5_STRING: {

        rc = fts5ExprNodeTest_STRING(pExpr, pNode);
        break;
      }

      case FTS5_TERM: {
        rc = fts5ExprNodeTest_TERM(pExpr, pNode);
        break;
      }

      case FTS5_AND: {
        rc = fts5ExprNodeTest_AND(pExpr, pNode);
        break;
      }

      case FTS5_OR: {


        fts5ExprNodeTest_OR(pExpr, pNode);










        break;
      }

      default: assert( pNode->eType==FTS5_NOT ); {












        rc = fts5ExprNodeTest_NOT(pExpr, pNode);






        break;
      }
    }
  }
  return rc;
}

 
/*
** Set node pNode, which is part of expression pExpr, to point to the first
** match. If there are no matches, set the Node.bEof flag to indicate EOF.
**
** Return an SQLite error code if an error occurs, or SQLITE_OK otherwise.
** It is not an error if there are no matches.
*/
static int fts5ExprNodeFirst(Fts5Expr *pExpr, Fts5ExprNode *pNode){
  int rc = SQLITE_OK;
  pNode->bEof = 0;
  pNode->bNomatch = 0;

  if( Fts5NodeIsString(pNode) ){
    /* Initialize all term iterators in the NEAR object. */
    rc = fts5ExprNearInitAll(pExpr, pNode);
  }else{
    int i;
    int nEof = 0;
    for(i=0; i<pNode->nChild && rc==SQLITE_OK; i++){
      Fts5ExprNode *pChild = pNode->apChild[i];
      rc = fts5ExprNodeFirst(pExpr, pNode->apChild[i]);
      assert( pChild->bEof==0 || pChild->bEof==1 );
      nEof += pChild->bEof;
    }
    pNode->iRowid = pNode->apChild[0]->iRowid;

    switch( pNode->eType ){
      case FTS5_AND:
        if( nEof>0 ) fts5ExprSetEof(pNode);
        break;

      case FTS5_OR:
        if( pNode->nChild==nEof ) fts5ExprSetEof(pNode);
        break;

      default:
        assert( pNode->eType==FTS5_NOT );
        pNode->bEof = pNode->apChild[0]->bEof;
        break;
    }
  }

  if( rc==SQLITE_OK ){
    rc = fts5ExprNodeTest(pExpr, pNode);
  }
  return rc;
}


/*
** Begin iterating through the set of documents in index pIdx matched by

**
** Return SQLITE_OK if successful, or an SQLite error code otherwise. It
** is not considered an error if the query does not match any documents.
*/
int sqlite3Fts5ExprFirst(Fts5Expr *p, Fts5Index *pIdx, i64 iFirst, int bDesc){
  Fts5ExprNode *pRoot = p->pRoot;
  int rc = SQLITE_OK;
  if( pRoot->xNext ){
    p->pIndex = pIdx;
    p->bDesc = bDesc;
    rc = fts5ExprNodeFirst(p, pRoot);

    /* If not at EOF but the current rowid occurs earlier than iFirst in
    ** the iteration order, move to document iFirst or later. */
    if( pRoot->bEof==0 && fts5RowidCmp(p, pRoot->iRowid, iFirst)<0 ){
      rc = fts5ExprNodeNext(p, pRoot, 1, iFirst);
    }

    /* If the iterator is not at a real match, skip forward until it is. */
    while( pRoot->bNomatch ){
      assert( pRoot->bEof==0 && rc==SQLITE_OK );
      rc = fts5ExprNodeNext(p, pRoot, 0, 0);
    }
  }
  return rc;
}

/*
** Move to the next document 
**
** Return SQLITE_OK if successful, or an SQLite error code otherwise. It
** is not considered an error if the query does not match any documents.
*/
int sqlite3Fts5ExprNext(Fts5Expr *p, i64 iLast){
  int rc;
  Fts5ExprNode *pRoot = p->pRoot;
  assert( pRoot->bEof==0 && pRoot->bNomatch==0 );
  do {
    rc = fts5ExprNodeNext(p, pRoot, 0, 0);
    assert( pRoot->bNomatch==0 || (rc==SQLITE_OK && pRoot->bEof==0) );
  }while( pRoot->bNomatch );
  if( fts5RowidCmp(p, pRoot->iRowid, iLast)>0 ){
    pRoot->bEof = 1;
  }
  return rc;
}

int sqlite3Fts5ExprEof(Fts5Expr *p){
  return p->pRoot->bEof;
}

i64 sqlite3Fts5ExprRowid(Fts5Expr *p){
  return p->pRoot->iRowid;
}

static int fts5ParseStringFromToken(Fts5Token *pToken, char **pz){

    int i;
    for(i=0; i<pPhrase->nTerm; i++){
      Fts5ExprTerm *pSyn;
      Fts5ExprTerm *pNext;
      Fts5ExprTerm *pTerm = &pPhrase->aTerm[i];
      sqlite3_free(pTerm->zTerm);
      sqlite3Fts5IterClose(pTerm->pIter);

      for(pSyn=pTerm->pSynonym; pSyn; pSyn=pNext){
        pNext = pSyn->pSynonym;
        sqlite3Fts5IterClose(pSyn->pIter);
        fts5BufferFree((Fts5Buffer*)&pSyn[1]);
        sqlite3_free(pSyn);
      }
    }
    if( pPhrase->poslist.nSpace>0 ) fts5BufferFree(&pPhrase->poslist);
    sqlite3_free(pPhrase);
  }
}

  /* If an error has already occurred, this is a no-op */
  if( pCtx->rc!=SQLITE_OK ) return pCtx->rc;

  assert( pPhrase==0 || pPhrase->nTerm>0 );
  if( pPhrase && (tflags & FTS5_TOKEN_COLOCATED) ){
    Fts5ExprTerm *pSyn;
    int nByte = sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer) + nToken+1;
    pSyn = (Fts5ExprTerm*)sqlite3_malloc(nByte);
    if( pSyn==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memset(pSyn, 0, nByte);
      pSyn->zTerm = ((char*)pSyn) + sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer);
      memcpy(pSyn->zTerm, pToken, nToken);
      pSyn->pSynonym = pPhrase->aTerm[pPhrase->nTerm-1].pSynonym;
      pPhrase->aTerm[pPhrase->nTerm-1].pSynonym = pSyn;
    }
  }else{
    Fts5ExprTerm *pTerm;
    if( pPhrase==0 || (pPhrase->nTerm % SZALLOC)==0 ){

    pNew->apExprPhrase[0] = sCtx.pPhrase;
    pNew->pRoot->pNear->apPhrase[0] = sCtx.pPhrase;
    pNew->pRoot->pNear->nPhrase = 1;
    sCtx.pPhrase->pNode = pNew->pRoot;

    if( pOrig->nTerm==1 && pOrig->aTerm[0].pSynonym==0 ){
      pNew->pRoot->eType = FTS5_TERM;
      pNew->pRoot->xNext = fts5ExprNodeNext_TERM;
    }else{
      pNew->pRoot->eType = FTS5_STRING;
      pNew->pRoot->xNext = fts5ExprNodeNext_STRING;
    }
  }else{
    sqlite3Fts5ExprFree(pNew);
    fts5ExprPhraseFree(sCtx.pPhrase);
    pNew = 0;
  }

  if( pNear ){
    pNear->pColset = pColset;
  }else{
    sqlite3_free(pColset);
  }
}

static void fts5ExprAssignXNext(Fts5ExprNode *pNode){
  switch( pNode->eType ){
    case FTS5_STRING: {
      Fts5ExprNearset *pNear = pNode->pNear;
      if( pNear->nPhrase==1 && pNear->apPhrase[0]->nTerm==1 
       && pNear->apPhrase[0]->aTerm[0].pSynonym==0
      ){
        pNode->eType = FTS5_TERM;
        pNode->xNext = fts5ExprNodeNext_TERM;
      }else{
        pNode->xNext = fts5ExprNodeNext_STRING;
      }
      break;
    };

    case FTS5_OR: {
      pNode->xNext = fts5ExprNodeNext_OR;
      break;
    };

    case FTS5_AND: {
      pNode->xNext = fts5ExprNodeNext_AND;
      break;
    };

    default: assert( pNode->eType==FTS5_NOT ); {
      pNode->xNext = fts5ExprNodeNext_NOT;
      break;
    };
  }
}

static void fts5ExprAddChildren(Fts5ExprNode *p, Fts5ExprNode *pSub){
  if( p->eType!=FTS5_NOT && pSub->eType==p->eType ){
    int nByte = sizeof(Fts5ExprNode*) * pSub->nChild;
    memcpy(&p->apChild[p->nChild], pSub->apChild, nByte);
    p->nChild += pSub->nChild;
    sqlite3_free(pSub);

    nByte = sizeof(Fts5ExprNode) + sizeof(Fts5ExprNode*)*(nChild-1);
    pRet = (Fts5ExprNode*)sqlite3Fts5MallocZero(&pParse->rc, nByte);

    if( pRet ){
      pRet->eType = eType;
      pRet->pNear = pNear;
      fts5ExprAssignXNext(pRet);
      if( eType==FTS5_STRING ){
        int iPhrase;
        for(iPhrase=0; iPhrase<pNear->nPhrase; iPhrase++){
          pNear->apPhrase[iPhrase]->pNode = pRet;
        }




        if( pParse->pConfig->eDetail!=FTS5_DETAIL_FULL 
         && (pNear->nPhrase!=1 || pNear->apPhrase[0]->nTerm!=1)
        ){
          assert( pParse->rc==SQLITE_OK );
          pParse->rc = SQLITE_ERROR;
          assert( pParse->zErr==0 );
          pParse->zErr = sqlite3_mprintf(
              "fts5: %s queries are not supported (detail!=full)", 
              pNear->nPhrase==1 ? "phrase": "NEAR"
          );
          sqlite3_free(pRet);
          pRet = 0;
        }

      }else{
        fts5ExprAddChildren(pRet, pLeft);
        fts5ExprAddChildren(pRet, pRight);
      }
    }
  }

  rc = sqlite3Fts5ConfigParse(pGlobal, db, nConfig, azConfig, &pConfig, &zErr);
  if( rc==SQLITE_OK ){
    rc = sqlite3Fts5ExprNew(pConfig, zExpr, &pExpr, &zErr);
  }
  if( rc==SQLITE_OK ){
    char *zText;
    if( pExpr->pRoot->xNext==0 ){
      zText = sqlite3_mprintf("");
    }else if( bTcl ){
      zText = fts5ExprPrintTcl(pConfig, zNearsetCmd, pExpr->pRoot);
    }else{
      zText = fts5ExprPrint(pConfig, pExpr->pRoot);
    }
    if( zText==0 ){

    { "fts5_isalnum",  fts5ExprIsAlnum },
    { "fts5_fold",     fts5ExprFold },
  };
  int i;
  int rc = SQLITE_OK;
  void *pCtx = (void*)pGlobal;

  for(i=0; rc==SQLITE_OK && i<ArraySize(aFunc); i++){
    struct Fts5ExprFunc *p = &aFunc[i];
    rc = sqlite3_create_function(db, p->z, -1, SQLITE_UTF8, pCtx, p->x, 0, 0);
  }

  /* Avoid a warning indicating that sqlite3Fts5ParserTrace() is unused */
#ifndef NDEBUG
  (void)sqlite3Fts5ParserTrace;

  int *pnCollist
){
  Fts5ExprPhrase *pPhrase = pExpr->apExprPhrase[iPhrase];
  Fts5ExprNode *pNode = pPhrase->pNode;
  int rc = SQLITE_OK;

  assert( iPhrase>=0 && iPhrase<pExpr->nPhrase );
  assert( pExpr->pConfig->eDetail==FTS5_DETAIL_COLUMNS );

  if( pNode->bEof==0 
   && pNode->iRowid==pExpr->pRoot->iRowid 
   && pPhrase->poslist.n>0
  ){
    Fts5ExprTerm *pTerm = &pPhrase->aTerm[0];
    if( pTerm->pSynonym ){
      Fts5Buffer *pBuf = (Fts5Buffer*)&pTerm->pSynonym[1];

      rc = fts5ExprSynonymList(
          pTerm, 1, 0, pNode->iRowid, pBuf, (u8**)ppCollist, pnCollist
      );




    }else{
      *ppCollist = pPhrase->aTerm[0].pIter->pData;


      *pnCollist = pPhrase->aTerm[0].pIter->nData;
    }
  }else{
    *ppCollist = 0;
    *pnCollist = 0;
  }

  return rc;
}

#define FTS5_DATA_ZERO_PADDING 8
#define FTS5_DATA_PADDING 20

typedef struct Fts5Data Fts5Data;
typedef struct Fts5DlidxIter Fts5DlidxIter;
typedef struct Fts5DlidxLvl Fts5DlidxLvl;
typedef struct Fts5DlidxWriter Fts5DlidxWriter;
typedef struct Fts5Iter Fts5Iter;
typedef struct Fts5PageWriter Fts5PageWriter;
typedef struct Fts5SegIter Fts5SegIter;
typedef struct Fts5DoclistIter Fts5DoclistIter;
typedef struct Fts5SegWriter Fts5SegWriter;
typedef struct Fts5Structure Fts5Structure;
typedef struct Fts5StructureLevel Fts5StructureLevel;
typedef struct Fts5StructureSegment Fts5StructureSegment;

** aFirst[1] contains the index in aSeg[] of the iterator that points to
** the smallest key overall. aFirst[0] is unused. 
**
** poslist:
**   Used by sqlite3Fts5IterPoslist() when the poslist needs to be buffered.
**   There is no way to tell if this is populated or not.
*/
struct Fts5Iter {
  Fts5IndexIter base;             /* Base class containing output vars */

  Fts5Index *pIndex;              /* Index that owns this iterator */
  Fts5Structure *pStruct;         /* Database structure for this iterator */
  Fts5Buffer poslist;             /* Buffer containing current poslist */
  Fts5Colset *pColset;            /* Restrict matches to these columns */

  /* Invoked to set output variables. */
  void (*xSetOutputs)(Fts5Iter*, Fts5SegIter*);

  int nSeg;                       /* Size of aSeg[] array */
  int bRev;                       /* True to iterate in reverse order */
  u8 bSkipEmpty;                  /* True to skip deleted entries */



  i64 iSwitchRowid;               /* Firstest rowid of other than aFirst[1] */
  Fts5CResult *aFirst;            /* Current merge state (see above) */
  Fts5SegIter aSeg[1];            /* Array of segment iterators */
};

}

/*
** Return true if the iterator passed as the second argument currently
** points to a delete marker. A delete marker is an entry with a 0 byte
** position-list.
*/
static int fts5MultiIterIsEmpty(Fts5Index *p, Fts5Iter *pIter){
  Fts5SegIter *pSeg = &pIter->aSeg[pIter->aFirst[1].iFirst];
  return (p->rc==SQLITE_OK && pSeg->pLeaf && pSeg->nPos==0);
}

/*
** Advance iterator pIter to the next entry.
**

    int iPoslist;
    if( pIter->iTermLeafPgno==pIter->iLeafPgno ){
      iPoslist = pIter->iTermLeafOffset;
    }else{
      iPoslist = 4;
    }
    fts5IndexSkipVarint(pLeaf->p, iPoslist);



    pIter->iLeafOffset = iPoslist;

    /* If this condition is true then the largest rowid for the current
    ** term may not be stored on the current page. So search forward to
    ** see where said rowid really is.  */
    if( pIter->iEndofDoclist>=pLeaf->szLeaf ){
      int pgno;

  Fts5StructureSegment *pSeg,     /* Description of segment */
  Fts5SegIter *pIter              /* Object to populate */
){
  int iPg = 1;
  int bGe = (flags & FTS5INDEX_QUERY_SCAN);
  int bDlidx = 0;                 /* True if there is a doclist-index */




  assert( bGe==0 || (flags & FTS5INDEX_QUERY_DESC)==0 );
  assert( pTerm && nTerm );
  memset(pIter, 0, sizeof(*pIter));
  pIter->pSeg = pSeg;

  /* This block sets stack variable iPg to the leaf page number that may
  ** contain term (pTerm/nTerm), if it is present in the segment. */

/*
** This function is used as part of the big assert() procedure implemented by
** fts5AssertMultiIterSetup(). It ensures that the result currently stored
** in *pRes is the correct result of comparing the current positions of the
** two iterators.
*/
static void fts5AssertComparisonResult(
  Fts5Iter *pIter, 
  Fts5SegIter *p1,
  Fts5SegIter *p2,
  Fts5CResult *pRes
){
  int i1 = p1 - pIter->aSeg;
  int i2 = p2 - pIter->aSeg;

/*
** This function is a no-op unless SQLITE_DEBUG is defined when this module
** is compiled. In that case, this function is essentially an assert() 
** statement used to verify that the contents of the pIter->aFirst[] array
** are correct.
*/
static void fts5AssertMultiIterSetup(Fts5Index *p, Fts5Iter *pIter){
  if( p->rc==SQLITE_OK ){
    Fts5SegIter *pFirst = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
    int i;

    assert( (pFirst->pLeaf==0)==pIter->base.bEof );

    /* Check that pIter->iSwitchRowid is set correctly. */
    for(i=0; i<pIter->nSeg; i++){
      Fts5SegIter *p1 = &pIter->aSeg[i];
      assert( p1==pFirst 
           || p1->pLeaf==0 
           || fts5BufferCompare(&pFirst->term, &p1->term) 

** Do the comparison necessary to populate pIter->aFirst[iOut].
**
** If the returned value is non-zero, then it is the index of an entry
** in the pIter->aSeg[] array that is (a) not at EOF, and (b) pointing
** to a key that is a duplicate of another, higher priority, 
** segment-iterator in the pSeg->aSeg[] array.
*/
static int fts5MultiIterDoCompare(Fts5Iter *pIter, int iOut){
  int i1;                         /* Index of left-hand Fts5SegIter */
  int i2;                         /* Index of right-hand Fts5SegIter */
  int iRes;
  Fts5SegIter *p1;                /* Left-hand Fts5SegIter */
  Fts5SegIter *p2;                /* Right-hand Fts5SegIter */
  Fts5CResult *pRes = &pIter->aFirst[iOut];

  }while( p->rc==SQLITE_OK );
}


/*
** Free the iterator object passed as the second argument.
*/
static void fts5MultiIterFree(Fts5Index *p, Fts5Iter *pIter){
  if( pIter ){
    int i;
    for(i=0; i<pIter->nSeg; i++){
      fts5SegIterClear(&pIter->aSeg[i]);
    }
    fts5StructureRelease(pIter->pStruct);
    fts5BufferFree(&pIter->poslist);
    sqlite3_free(pIter);
  }
}

static void fts5MultiIterAdvanced(
  Fts5Index *p,                   /* FTS5 backend to iterate within */
  Fts5Iter *pIter,                /* Iterator to update aFirst[] array for */
  int iChanged,                   /* Index of sub-iterator just advanced */
  int iMinset                     /* Minimum entry in aFirst[] to set */
){
  int i;
  for(i=(pIter->nSeg+iChanged)/2; i>=iMinset && p->rc==SQLITE_OK; i=i/2){
    int iEq;
    if( (iEq = fts5MultiIterDoCompare(pIter, i)) ){

**
** If non-zero is returned, the caller should call fts5MultiIterAdvanced()
** on the iterator instead. That function does the same as this one, except
** that it deals with more complicated cases as well.
*/ 
static int fts5MultiIterAdvanceRowid(
  Fts5Index *p,                   /* FTS5 backend to iterate within */
  Fts5Iter *pIter,                /* Iterator to update aFirst[] array for */
  int iChanged,                   /* Index of sub-iterator just advanced */
  Fts5SegIter **ppFirst
){
  Fts5SegIter *pNew = &pIter->aSeg[iChanged];

  if( pNew->iRowid==pIter->iSwitchRowid
   || (pNew->iRowid<pIter->iSwitchRowid)==pIter->bRev
  ){
    int i;

      pRes->iFirst = (u16)(pNew - pIter->aSeg);
      if( i==1 ) break;

      pOther = &pIter->aSeg[ pIter->aFirst[i ^ 0x0001].iFirst ];
    }
  }

  *ppFirst = pNew;
  return 0;
}

/*
** Set the pIter->bEof variable based on the state of the sub-iterators.
*/
static void fts5MultiIterSetEof(Fts5Iter *pIter){
  Fts5SegIter *pSeg = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
  pIter->base.bEof = pSeg->pLeaf==0;
  pIter->iSwitchRowid = pSeg->iRowid;
}

/*
** Move the iterator to the next entry. 
**
** If an error occurs, an error code is left in Fts5Index.rc. It is not 
** considered an error if the iterator reaches EOF, or if it is already at 
** EOF when this function is called.
*/
static void fts5MultiIterNext(
  Fts5Index *p, 
  Fts5Iter *pIter,
  int bFrom,                      /* True if argument iFrom is valid */
  i64 iFrom                       /* Advance at least as far as this */
){

  int bUseFrom = bFrom;

  while( p->rc==SQLITE_OK ){
    int iFirst = pIter->aFirst[1].iFirst;
    int bNewTerm = 0;
    Fts5SegIter *pSeg = &pIter->aSeg[iFirst];
    assert( p->rc==SQLITE_OK );
    if( bUseFrom && pSeg->pDlidx ){
      fts5SegIterNextFrom(p, pSeg, iFrom);
    }else{
      pSeg->xNext(p, pSeg, &bNewTerm);
    }

    if( pSeg->pLeaf==0 || bNewTerm 
     || fts5MultiIterAdvanceRowid(p, pIter, iFirst, &pSeg)
    ){
      fts5MultiIterAdvanced(p, pIter, iFirst, 1);
      fts5MultiIterSetEof(pIter);
      pSeg = &pIter->aSeg[pIter->aFirst[1].iFirst];
      if( pSeg->pLeaf==0 ) return;
    }

    fts5AssertMultiIterSetup(p, pIter);
    assert( pSeg==&pIter->aSeg[pIter->aFirst[1].iFirst] && pSeg->pLeaf );
    if( pIter->bSkipEmpty==0 || pSeg->nPos ){
      pIter->xSetOutputs(pIter, pSeg);
      return;
    }
    bUseFrom = 0;

  }
}

static void fts5MultiIterNext2(
  Fts5Index *p, 
  Fts5Iter *pIter,
  int *pbNewTerm                  /* OUT: True if *might* be new term */
){
  assert( pIter->bSkipEmpty );
  if( p->rc==SQLITE_OK ){
    do {
      int iFirst = pIter->aFirst[1].iFirst;
      Fts5SegIter *pSeg = &pIter->aSeg[iFirst];
      int bNewTerm = 0;

      assert( p->rc==SQLITE_OK );
      pSeg->xNext(p, pSeg, &bNewTerm);
      if( pSeg->pLeaf==0 || bNewTerm 
       || fts5MultiIterAdvanceRowid(p, pIter, iFirst, &pSeg)
      ){
        fts5MultiIterAdvanced(p, pIter, iFirst, 1);
        fts5MultiIterSetEof(pIter);
        *pbNewTerm = 1;
      }else{
        *pbNewTerm = 0;
      }
      fts5AssertMultiIterSetup(p, pIter);

    }while( fts5MultiIterIsEmpty(p, pIter) );
  }
}

static void fts5IterSetOutputs_Noop(Fts5Iter *pIter, Fts5SegIter *pSeg){
}

static Fts5Iter *fts5MultiIterAlloc(
  Fts5Index *p,                   /* FTS5 backend to iterate within */
  int nSeg
){
  Fts5Iter *pNew;
  int nSlot;                      /* Power of two >= nSeg */

  for(nSlot=2; nSlot<nSeg; nSlot=nSlot*2);
  pNew = fts5IdxMalloc(p, 
      sizeof(Fts5Iter) +                  /* pNew */
      sizeof(Fts5SegIter) * (nSlot-1) +   /* pNew->aSeg[] */
      sizeof(Fts5CResult) * nSlot         /* pNew->aFirst[] */
  );
  if( pNew ){
    pNew->nSeg = nSlot;
    pNew->aFirst = (Fts5CResult*)&pNew->aSeg[nSlot];
    pNew->pIndex = p;
    pNew->xSetOutputs = fts5IterSetOutputs_Noop;
  }
  return pNew;
}












static void fts5PoslistCallback(
  Fts5Index *p, 



  void *pContext, 
  const u8 *pChunk, int nChunk



){



  assert_nc( nChunk>=0 );
  if( nChunk>0 ){
    fts5BufferSafeAppendBlob((Fts5Buffer*)pContext, pChunk, nChunk);


  }

}




typedef struct PoslistCallbackCtx PoslistCallbackCtx;


struct PoslistCallbackCtx {
  Fts5Buffer *pBuf;               /* Append to this buffer */
  Fts5Colset *pColset;            /* Restrict matches to this column */
  int eState;                     /* See above */
};





typedef struct PoslistOffsetsCtx PoslistOffsetsCtx;
struct PoslistOffsetsCtx {
  Fts5Buffer *pBuf;               /* Append to this buffer */
  Fts5Colset *pColset;            /* Restrict matches to this column */
  int iRead;
  int iWrite;
};









/*
** TODO: Make this more efficient!
*/
static int fts5IndexColsetTest(Fts5Colset *pColset, int iCol){
  int i;
  for(i=0; i<pColset->nCol; i++){


    if( pColset->aiCol[i]==iCol ) return 1;



  }
  return 0;
}







static void fts5PoslistOffsetsCallback(
  Fts5Index *p, 
  void *pContext, 
  const u8 *pChunk, int nChunk

){
  PoslistOffsetsCtx *pCtx = (PoslistOffsetsCtx*)pContext;
  assert_nc( nChunk>=0 );
  if( nChunk>0 ){
    int i = 0;
    while( i<nChunk ){
      int iVal;
      i += fts5GetVarint32(&pChunk[i], iVal);

      iVal += pCtx->iRead - 2;
      pCtx->iRead = iVal;
      if( fts5IndexColsetTest(pCtx->pColset, iVal) ){
        fts5BufferSafeAppendVarint(pCtx->pBuf, iVal + 2 - pCtx->iWrite);
        pCtx->iWrite = iVal;
      }
    }


  }


}











static void fts5PoslistFilterCallback(
  Fts5Index *p, 



  void *pContext, 
  const u8 *pChunk, int nChunk
){
  PoslistCallbackCtx *pCtx = (PoslistCallbackCtx*)pContext;
  assert_nc( nChunk>=0 );

  if( nChunk>0 ){
    /* Search through to find the first varint with value 1. This is the
    ** start of the next columns hits. */
    int i = 0;
    int iStart = 0;



    if( pCtx->eState==2 ){

      int iCol;
      fts5FastGetVarint32(pChunk, i, iCol);


      if( fts5IndexColsetTest(pCtx->pColset, iCol) ){
        pCtx->eState = 1;

        fts5BufferSafeAppendVarint(pCtx->pBuf, 1);
      }else{


        pCtx->eState = 0;


      }

    }
















    do {








      while( i<nChunk && pChunk[i]!=0x01 ){
        while( pChunk[i] & 0x80 ) i++;
        i++;
      }
      if( pCtx->eState ){
        fts5BufferSafeAppendBlob(pCtx->pBuf, &pChunk[iStart], i-iStart);
      }







      if( i<nChunk ){
        int iCol;
        iStart = i;

        i++;
        if( i>=nChunk ){
          pCtx->eState = 2;
        }else{
          fts5FastGetVarint32(pChunk, i, iCol);
          pCtx->eState = fts5IndexColsetTest(pCtx->pColset, iCol);
          if( pCtx->eState ){

            fts5BufferSafeAppendBlob(pCtx->pBuf, &pChunk[iStart], i-iStart);
            iStart = i;
          }
        }
      }








    }while( i<nChunk );
  }
}

static void fts5ChunkIterate(
  Fts5Index *p,                   /* Index object */
  Fts5SegIter *pSeg,              /* Poslist of this iterator */
  void *pCtx,                     /* Context pointer for xChunk callback */
  void (*xChunk)(Fts5Index*, void*, const u8*, int)

        pSeg->pNextLeaf = pData;
        pData = 0;
      }
    }
  }
}

/*
** Iterator pIter currently points to a valid entry (not EOF). This
** function appends the position list data for the current entry to
** buffer pBuf. It does not make a copy of the position-list size
** field.
*/
static void fts5SegiterPoslist(
  Fts5Index *p,
  Fts5SegIter *pSeg,
  Fts5Colset *pColset,
  Fts5Buffer *pBuf
){
  if( 0==fts5BufferGrow(&p->rc, pBuf, pSeg->nPos) ){
    if( pColset==0 ){
      fts5ChunkIterate(p, pSeg, (void*)pBuf, fts5PoslistCallback);
    }else{
      if( p->pConfig->eDetail==FTS5_DETAIL_FULL ){
        PoslistCallbackCtx sCtx;
        sCtx.pBuf = pBuf;
        sCtx.pColset = pColset;
        sCtx.eState = fts5IndexColsetTest(pColset, 0);
        assert( sCtx.eState==0 || sCtx.eState==1 );
        fts5ChunkIterate(p, pSeg, (void*)&sCtx, fts5PoslistFilterCallback);
      }else{
        PoslistOffsetsCtx sCtx;
        memset(&sCtx, 0, sizeof(sCtx));
        sCtx.pBuf = pBuf;
        sCtx.pColset = pColset;
        fts5ChunkIterate(p, pSeg, (void*)&sCtx, fts5PoslistOffsetsCallback);
      }
    }
  }
}

/*
** IN/OUT parameter (*pa) points to a position list n bytes in size. If
** the position list contains entries for column iCol, then (*pa) is set
** to point to the sub-position-list for that column and the number of
** bytes in it returned. Or, if the argument position list does not
** contain any entries for column iCol, return 0.
*/
static int fts5IndexExtractCol(
  const u8 **pa,                  /* IN/OUT: Pointer to poslist */
  int n,                          /* IN: Size of poslist in bytes */
  int iCol                        /* Column to extract from poslist */
){
  int iCurrent = 0;               /* Anything before the first 0x01 is col 0 */
  const u8 *p = *pa;
  const u8 *pEnd = &p[n];         /* One byte past end of position list */

  while( iCol>iCurrent ){
    /* Advance pointer p until it points to pEnd or an 0x01 byte that is
    ** not part of a varint. Note that it is not possible for a negative
    ** or extremely large varint to occur within an uncorrupted position 
    ** list. So the last byte of each varint may be assumed to have a clear
    ** 0x80 bit.  */
    while( *p!=0x01 ){
      while( *p++ & 0x80 );
      if( p>=pEnd ) return 0;
    }
    *pa = p++;
    iCurrent = *p++;
    if( iCurrent & 0x80 ){
      p--;
      p += fts5GetVarint32(p, iCurrent);
    }
  }
  if( iCol!=iCurrent ) return 0;

  /* Advance pointer p until it points to pEnd or an 0x01 byte that is
  ** not part of a varint */
  while( p<pEnd && *p!=0x01 ){
    while( *p++ & 0x80 );
  }

  return p - (*pa);
}

static int fts5IndexExtractColset (
  Fts5Colset *pColset,            /* Colset to filter on */
  const u8 *pPos, int nPos,       /* Position list */
  Fts5Buffer *pBuf                /* Output buffer */
){
  int rc = SQLITE_OK;
  int i;

  fts5BufferZero(pBuf);
  for(i=0; i<pColset->nCol; i++){
    const u8 *pSub = pPos;
    int nSub = fts5IndexExtractCol(&pSub, nPos, pColset->aiCol[i]);
    if( nSub ){
      fts5BufferAppendBlob(&rc, pBuf, nSub, pSub);
    }
  }
  return rc;
}

/*
** xSetOutputs callback used by detail=none tables.
*/
static void fts5IterSetOutputs_None(Fts5Iter *pIter, Fts5SegIter *pSeg){
  assert( pIter->pIndex->pConfig->eDetail==FTS5_DETAIL_NONE );
  pIter->base.iRowid = pSeg->iRowid;
  pIter->base.nData = pSeg->nPos;
}

/*
** xSetOutputs callback used by detail=full and detail=col tables when no
** column filters are specified.
*/
static void fts5IterSetOutputs_Nocolset(Fts5Iter *pIter, Fts5SegIter *pSeg){
  pIter->base.iRowid = pSeg->iRowid;
  pIter->base.nData = pSeg->nPos;

  assert( pIter->pIndex->pConfig->eDetail!=FTS5_DETAIL_NONE );
  assert( pIter->pColset==0 );

  if( pSeg->iLeafOffset+pSeg->nPos<=pSeg->pLeaf->szLeaf ){
    /* All data is stored on the current page. Populate the output 
    ** variables to point into the body of the page object. */
    pIter->base.pData = &pSeg->pLeaf->p[pSeg->iLeafOffset];
  }else{
    /* The data is distributed over two or more pages. Copy it into the
    ** Fts5Iter.poslist buffer and then set the output pointer to point
    ** to this buffer.  */
    fts5BufferZero(&pIter->poslist);
    fts5SegiterPoslist(pIter->pIndex, pSeg, 0, &pIter->poslist);
    pIter->base.pData = pIter->poslist.p;
  }
}

/*
** xSetOutputs callback used by detail=col when there is a column filter
** and there are 100 or more columns. Also called as a fallback from
** fts5IterSetOutputs_Col100 if the column-list spans more than one page.
*/
static void fts5IterSetOutputs_Col(Fts5Iter *pIter, Fts5SegIter *pSeg){
  fts5BufferZero(&pIter->poslist);
  fts5SegiterPoslist(pIter->pIndex, pSeg, pIter->pColset, &pIter->poslist);
  pIter->base.iRowid = pSeg->iRowid;
  pIter->base.pData = pIter->poslist.p;
  pIter->base.nData = pIter->poslist.n;
}

/*
** xSetOutputs callback used when: 
**
**   * detail=col,
**   * there is a column filter, and
**   * the table contains 100 or fewer columns. 
**
** The last point is to ensure all column numbers are stored as 
** single-byte varints.
*/
static void fts5IterSetOutputs_Col100(Fts5Iter *pIter, Fts5SegIter *pSeg){

  assert( pIter->pIndex->pConfig->eDetail==FTS5_DETAIL_COLUMNS );
  assert( pIter->pColset );

  if( pSeg->iLeafOffset+pSeg->nPos>pSeg->pLeaf->szLeaf ){
    fts5IterSetOutputs_Col(pIter, pSeg);
  }else{
    u8 *a = (u8*)&pSeg->pLeaf->p[pSeg->iLeafOffset];
    u8 *pEnd = (u8*)&a[pSeg->nPos]; 
    int iPrev = 0;
    int *aiCol = pIter->pColset->aiCol;
    int *aiColEnd = &aiCol[pIter->pColset->nCol];

    u8 *aOut = pIter->poslist.p;
    int iPrevOut = 0;

    pIter->base.iRowid = pSeg->iRowid;

    while( a<pEnd ){
      iPrev += (int)a++[0] - 2;
      while( *aiCol<iPrev ){
        aiCol++;
        if( aiCol==aiColEnd ) goto setoutputs_col_out;
      }
      if( *aiCol==iPrev ){
        *aOut++ = (iPrev - iPrevOut) + 2;
        iPrevOut = iPrev;
      }
    }

setoutputs_col_out:
    pIter->base.pData = pIter->poslist.p;
    pIter->base.nData = aOut - pIter->poslist.p;
  }
}

/*
** xSetOutputs callback used by detail=full when there is a column filter.
*/
static void fts5IterSetOutputs_Full(Fts5Iter *pIter, Fts5SegIter *pSeg){
  Fts5Colset *pColset = pIter->pColset;
  pIter->base.iRowid = pSeg->iRowid;

  assert( pIter->pIndex->pConfig->eDetail==FTS5_DETAIL_FULL );
  assert( pColset );

  if( pSeg->iLeafOffset+pSeg->nPos<=pSeg->pLeaf->szLeaf ){
    /* All data is stored on the current page. Populate the output 
    ** variables to point into the body of the page object. */
    const u8 *a = &pSeg->pLeaf->p[pSeg->iLeafOffset];
    if( pColset->nCol==1 ){
      pIter->base.nData = fts5IndexExtractCol(&a, pSeg->nPos,pColset->aiCol[0]);
      pIter->base.pData = a;
    }else{
      fts5BufferZero(&pIter->poslist);
      fts5IndexExtractColset(pColset, a, pSeg->nPos, &pIter->poslist);
      pIter->base.pData = pIter->poslist.p;
      pIter->base.nData = pIter->poslist.n;
    }
  }else{
    /* The data is distributed over two or more pages. Copy it into the
    ** Fts5Iter.poslist buffer and then set the output pointer to point
    ** to this buffer.  */
    fts5BufferZero(&pIter->poslist);
    fts5SegiterPoslist(pIter->pIndex, pSeg, pColset, &pIter->poslist);
    pIter->base.pData = pIter->poslist.p;
    pIter->base.nData = pIter->poslist.n;
  }
}

static void fts5IterSetOutputCb(int *pRc, Fts5Iter *pIter){
  if( *pRc==SQLITE_OK ){
    Fts5Config *pConfig = pIter->pIndex->pConfig;
    if( pConfig->eDetail==FTS5_DETAIL_NONE ){
      pIter->xSetOutputs = fts5IterSetOutputs_None;
    }

    else if( pIter->pColset==0 ){
      pIter->xSetOutputs = fts5IterSetOutputs_Nocolset;
    }

    else if( pConfig->eDetail==FTS5_DETAIL_FULL ){
      pIter->xSetOutputs = fts5IterSetOutputs_Full;
    }

    else{
      assert( pConfig->eDetail==FTS5_DETAIL_COLUMNS );
      if( pConfig->nCol<=100 ){
        pIter->xSetOutputs = fts5IterSetOutputs_Col100;
        sqlite3Fts5BufferSize(pRc, &pIter->poslist, pConfig->nCol);
      }else{
        pIter->xSetOutputs = fts5IterSetOutputs_Col;
      }
    }
  }
}


/*
** Allocate a new Fts5Iter object.
**
** The new object will be used to iterate through data in structure pStruct.
** If iLevel is -ve, then all data in all segments is merged. Or, if iLevel
** is zero or greater, data from the first nSegment segments on level iLevel
** is merged.
**
** The iterator initially points to the first term/rowid entry in the 
** iterated data.
*/
static void fts5MultiIterNew(
  Fts5Index *p,                   /* FTS5 backend to iterate within */
  Fts5Structure *pStruct,         /* Structure of specific index */
  int flags,                      /* FTS5INDEX_QUERY_XXX flags */
  Fts5Colset *pColset,            /* Colset to filter on (or NULL) */
  const u8 *pTerm, int nTerm,     /* Term to seek to (or NULL/0) */
  int iLevel,                     /* Level to iterate (-1 for all) */
  int nSegment,                   /* Number of segments to merge (iLevel>=0) */
  Fts5Iter **ppOut                /* New object */
){
  int nSeg = 0;                   /* Number of segment-iters in use */
  int iIter = 0;                  /* */
  int iSeg;                       /* Used to iterate through segments */
  Fts5Buffer buf = {0,0,0};       /* Buffer used by fts5SegIterSeekInit() */
  Fts5StructureLevel *pLvl;
  Fts5Iter *pNew;

  assert( (pTerm==0 && nTerm==0) || iLevel<0 );

  /* Allocate space for the new multi-seg-iterator. */
  if( p->rc==SQLITE_OK ){
    if( iLevel<0 ){
      assert( pStruct->nSegment==fts5StructureCountSegments(pStruct) );
      nSeg = pStruct->nSegment;
      nSeg += (p->pHash ? 1 : 0);
    }else{
      nSeg = MIN(pStruct->aLevel[iLevel].nSeg, nSegment);
    }
  }
  *ppOut = pNew = fts5MultiIterAlloc(p, nSeg);
  if( pNew==0 ) return;
  pNew->bRev = (0!=(flags & FTS5INDEX_QUERY_DESC));
  pNew->bSkipEmpty = (0!=(flags & FTS5INDEX_QUERY_SKIPEMPTY));
  pNew->pStruct = pStruct;
  pNew->pColset = pColset;
  fts5StructureRef(pStruct);
  if( (flags & FTS5INDEX_QUERY_NOOUTPUT)==0 ){
    fts5IterSetOutputCb(&p->rc, pNew);
  }

  /* Initialize each of the component segment iterators. */
  if( p->rc==SQLITE_OK ){
    if( iLevel<0 ){
      Fts5StructureLevel *pEnd = &pStruct->aLevel[pStruct->nLevel];
      if( p->pHash ){
        /* Add a segment iterator for the current contents of the hash table. */
        Fts5SegIter *pIter = &pNew->aSeg[iIter++];
        fts5SegIterHashInit(p, pTerm, nTerm, flags, pIter);
      }
      for(pLvl=&pStruct->aLevel[0]; pLvl<pEnd; pLvl++){
        for(iSeg=pLvl->nSeg-1; iSeg>=0; iSeg--){
          Fts5StructureSegment *pSeg = &pLvl->aSeg[iSeg];
          Fts5SegIter *pIter = &pNew->aSeg[iIter++];
          if( pTerm==0 ){
            fts5SegIterInit(p, pSeg, pIter);
          }else{
            fts5SegIterSeekInit(p, &buf, pTerm, nTerm, flags, pSeg, pIter);
          }
        }
      }
    }else{
      pLvl = &pStruct->aLevel[iLevel];
      for(iSeg=nSeg-1; iSeg>=0; iSeg--){
        fts5SegIterInit(p, &pLvl->aSeg[iSeg], &pNew->aSeg[iIter++]);
      }
    }
    assert( iIter==nSeg );
  }

  /* If the above was successful, each component iterators now points 
  ** to the first entry in its segment. In this case initialize the 
  ** aFirst[] array. Or, if an error has occurred, free the iterator
  ** object and set the output variable to NULL.  */
  if( p->rc==SQLITE_OK ){
    for(iIter=pNew->nSeg-1; iIter>0; iIter--){
      int iEq;
      if( (iEq = fts5MultiIterDoCompare(pNew, iIter)) ){
        Fts5SegIter *pSeg = &pNew->aSeg[iEq];
        if( p->rc==SQLITE_OK ) pSeg->xNext(p, pSeg, 0);
        fts5MultiIterAdvanced(p, pNew, iEq, iIter);
      }
    }
    fts5MultiIterSetEof(pNew);
    fts5AssertMultiIterSetup(p, pNew);

    if( pNew->bSkipEmpty && fts5MultiIterIsEmpty(p, pNew) ){
      fts5MultiIterNext(p, pNew, 0, 0);
    }else if( pNew->base.bEof==0 ){
      Fts5SegIter *pSeg = &pNew->aSeg[pNew->aFirst[1].iFirst];
      pNew->xSetOutputs(pNew, pSeg);
    }

  }else{
    fts5MultiIterFree(p, pNew);
    *ppOut = 0;
  }
  fts5BufferFree(&buf);

}

/*
** Create an Fts5Iter that iterates through the doclist provided
** as the second argument.
*/
static void fts5MultiIterNew2(
  Fts5Index *p,                   /* FTS5 backend to iterate within */
  Fts5Data *pData,                /* Doclist to iterate through */
  int bDesc,                      /* True for descending rowid order */
  Fts5Iter **ppOut                /* New object */
){
  Fts5Iter *pNew;
  pNew = fts5MultiIterAlloc(p, 2);
  if( pNew ){
    Fts5SegIter *pIter = &pNew->aSeg[1];

    pIter->flags = FTS5_SEGITER_ONETERM;
    if( pData->szLeaf>0 ){
      pIter->pLeaf = pData;
      pIter->iLeafOffset = fts5GetVarint(pData->p, (u64*)&pIter->iRowid);
      pIter->iEndofDoclist = pData->nn;
      pNew->aFirst[1].iFirst = 1;
      if( bDesc ){
        pNew->bRev = 1;
        pIter->flags |= FTS5_SEGITER_REVERSE;
        fts5SegIterReverseInitPage(p, pIter);
      }else{
        fts5SegIterLoadNPos(p, pIter);
      }
      pData = 0;
    }else{
      pNew->base.bEof = 1;
    }
    fts5SegIterSetNext(p, pIter);

    *ppOut = pNew;
  }

  fts5DataRelease(pData);
}

/*
** Return true if the iterator is at EOF or if an error has occurred. 
** False otherwise.
*/
static int fts5MultiIterEof(Fts5Index *p, Fts5Iter *pIter){
  assert( p->rc 
      || (pIter->aSeg[ pIter->aFirst[1].iFirst ].pLeaf==0)==pIter->base.bEof 
  );
  return (p->rc || pIter->base.bEof);
}

/*
** Return the rowid of the entry that the iterator currently points
** to. If the iterator points to EOF when this function is called the
** results are undefined.
*/
static i64 fts5MultiIterRowid(Fts5Iter *pIter){
  assert( pIter->aSeg[ pIter->aFirst[1].iFirst ].pLeaf );
  return pIter->aSeg[ pIter->aFirst[1].iFirst ].iRowid;
}

/*
** Move the iterator to the next entry at or following iMatch.
*/
static void fts5MultiIterNextFrom(
  Fts5Index *p, 
  Fts5Iter *pIter, 
  i64 iMatch
){
  while( 1 ){
    i64 iRowid;
    fts5MultiIterNext(p, pIter, 1, iMatch);
    if( fts5MultiIterEof(p, pIter) ) break;
    iRowid = fts5MultiIterRowid(pIter);
    if( pIter->bRev==0 && iRowid>=iMatch ) break;
    if( pIter->bRev!=0 && iRowid<=iMatch ) break;
  }
}

/*
** Return a pointer to a buffer containing the term associated with the 
** entry that the iterator currently points to.
*/
static const u8 *fts5MultiIterTerm(Fts5Iter *pIter, int *pn){
  Fts5SegIter *p = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
  *pn = p->term.n;
  return p->term.p;
}

/*
** Allocate a new segment-id for the structure pStruct. The new segment
** id must be between 1 and 65335 inclusive, and must not be used by 
** any currently existing segment. If a free segment id cannot be found,
** SQLITE_FULL is returned.
**

}

/*
** Iterator pIter was used to iterate through the input segments of on an
** incremental merge operation. This function is called if the incremental
** merge step has finished but the input has not been completely exhausted.
*/
static void fts5TrimSegments(Fts5Index *p, Fts5Iter *pIter){
  int i;
  Fts5Buffer buf;
  memset(&buf, 0, sizeof(Fts5Buffer));
  for(i=0; i<pIter->nSeg; i++){
    Fts5SegIter *pSeg = &pIter->aSeg[i];
    if( pSeg->pSeg==0 ){
      /* no-op */

  Fts5Structure **ppStruct,       /* IN/OUT: Stucture of index */
  int iLvl,                       /* Level to read input from */
  int *pnRem                      /* Write up to this many output leaves */
){
  Fts5Structure *pStruct = *ppStruct;
  Fts5StructureLevel *pLvl = &pStruct->aLevel[iLvl];
  Fts5StructureLevel *pLvlOut;
  Fts5Iter *pIter = 0;       /* Iterator to read input data */
  int nRem = pnRem ? *pnRem : 0;  /* Output leaf pages left to write */
  int nInput;                     /* Number of input segments */
  Fts5SegWriter writer;           /* Writer object */
  Fts5StructureSegment *pSeg;     /* Output segment */
  Fts5Buffer term;
  int bOldest;                    /* True if the output segment is the oldest */
  int eDetail = p->pConfig->eDetail;
  const int flags = FTS5INDEX_QUERY_NOOUTPUT;

  assert( iLvl<pStruct->nLevel );
  assert( pLvl->nMerge<=pLvl->nSeg );

  memset(&writer, 0, sizeof(Fts5SegWriter));
  memset(&term, 0, sizeof(Fts5Buffer));
  if( pLvl->nMerge ){

    /* Read input from all segments in the input level */
    nInput = pLvl->nSeg;
  }
  bOldest = (pLvlOut->nSeg==1 && pStruct->nLevel==iLvl+2);

  assert( iLvl>=0 );
  for(fts5MultiIterNew(p, pStruct, flags, 0, 0, 0, iLvl, nInput, &pIter);
      fts5MultiIterEof(p, pIter)==0;
      fts5MultiIterNext(p, pIter, 0, 0)
  ){
    Fts5SegIter *pSegIter = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
    int nPos;                     /* position-list size field value */
    int nTerm;
    const u8 *pTerm;

    fts5StructureWrite(p, pStruct);
  }
  fts5StructureRelease(pStruct);

  return fts5IndexReturn(p);
}





















































































































static void fts5AppendRowid(
  Fts5Index *p,


































































  i64 iDelta,
  Fts5Iter *pMulti,

  Fts5Buffer *pBuf
){
  fts5BufferAppendVarint(&p->rc, pBuf, iDelta);

}















static void fts5AppendPoslist(
  Fts5Index *p,
  i64 iDelta,
  Fts5Iter *pMulti,

  Fts5Buffer *pBuf
){

  int nData = pMulti->base.nData;

  assert( nData>0 );
  if( p->rc==SQLITE_OK && 0==fts5BufferGrow(&p->rc, pBuf, nData+9+9) ){













    fts5BufferSafeAppendVarint(pBuf, iDelta);
    fts5BufferSafeAppendVarint(pBuf, nData*2);
    fts5BufferSafeAppendBlob(pBuf, pMulti->base.pData, nData);




  }





























}


static void fts5DoclistIterNext(Fts5DoclistIter *pIter){
  u8 *p = pIter->aPoslist + pIter->nSize + pIter->nPoslist;

  assert( pIter->aPoslist );

  Fts5Buffer *p1,                 /* First list to merge */
  Fts5Buffer *p2                  /* Second list to merge */
){
  if( p2->n ){
    i64 iLastRowid = 0;
    Fts5DoclistIter i1;
    Fts5DoclistIter i2;
    Fts5Buffer out = {0, 0, 0};
    Fts5Buffer tmp = {0, 0, 0};



    if( sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n) ) return;
    fts5DoclistIterInit(p1, &i1);
    fts5DoclistIterInit(p2, &i2);

    while( 1 ){
      if( i1.iRowid<i2.iRowid ){
        /* Copy entry from i1 */
        fts5MergeAppendDocid(&out, iLastRowid, i1.iRowid);
        fts5BufferSafeAppendBlob(&out, i1.aPoslist, i1.nPoslist+i1.nSize);
        fts5DoclistIterNext(&i1);
        if( i1.aPoslist==0 ) break;
      }
      else if( i2.iRowid!=i1.iRowid ){
        /* Copy entry from i2 */
        fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid);
        fts5BufferSafeAppendBlob(&out, i2.aPoslist, i2.nPoslist+i2.nSize);
        fts5DoclistIterNext(&i2);
        if( i2.aPoslist==0 ) break;
      }
      else{
        /* Merge the two position lists. */ 
        i64 iPos1 = 0;
        i64 iPos2 = 0;
        int iOff1 = 0;
        int iOff2 = 0;
        u8 *a1 = &i1.aPoslist[i1.nSize];
        u8 *a2 = &i2.aPoslist[i2.nSize];

        i64 iPrev = 0;
        Fts5PoslistWriter writer;
        memset(&writer, 0, sizeof(writer));


        fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid);
        fts5BufferZero(&tmp);
        sqlite3Fts5BufferSize(&p->rc, &tmp, i1.nPoslist + i2.nPoslist);
        if( p->rc ) break;

        sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
        sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
        assert( iPos1>=0 && iPos2>=0 );



        if( iPos1<iPos2 ){
          sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos1);
          sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
        }else{
          sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos2);
          sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
        }

        if( iPos1>=0 && iPos2>=0 ){
          while( 1 ){
            if( iPos1<iPos2 ){
              if( iPos1!=iPrev ){
                sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos1);
              }
              sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
              if( iPos1<0 ) break;
            }else{
              assert( iPos2!=iPrev );
              sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos2);
              sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
              if( iPos2<0 ) break;
            }
          }
        }

        if( iPos1>=0 ){
          if( iPos1!=iPrev ){
            sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos1);
          }
          fts5BufferSafeAppendBlob(&tmp, &a1[iOff1], i1.nPoslist-iOff1);
        }else{
          assert( iPos2>=0 && iPos2!=iPrev );
          sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos2);
          fts5BufferSafeAppendBlob(&tmp, &a2[iOff2], i2.nPoslist-iOff2);
        }

        /* WRITEPOSLISTSIZE */
        fts5BufferSafeAppendVarint(&out, tmp.n * 2);
        fts5BufferSafeAppendBlob(&out, tmp.p, tmp.n);
        fts5DoclistIterNext(&i1);
        fts5DoclistIterNext(&i2);
        if( i1.aPoslist==0 || i2.aPoslist==0 ) break;
      }
    }

    if( i1.aPoslist ){
      fts5MergeAppendDocid(&out, iLastRowid, i1.iRowid);
      fts5BufferSafeAppendBlob(&out, i1.aPoslist, i1.aEof - i1.aPoslist);
    }
    else if( i2.aPoslist ){
      fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid);
      fts5BufferSafeAppendBlob(&out, i2.aPoslist, i2.aEof - i2.aPoslist);
    }

    fts5BufferSet(&p->rc, p1, out.n, out.p);
    fts5BufferFree(&tmp);
    fts5BufferFree(&out);
  }
}

static void fts5SetupPrefixIter(
  Fts5Index *p,                   /* Index to read from */
  int bDesc,                      /* True for "ORDER BY rowid DESC" */
  const u8 *pToken,               /* Buffer containing prefix to match */
  int nToken,                     /* Size of buffer pToken in bytes */
  Fts5Colset *pColset,            /* Restrict matches to these columns */
  Fts5Iter **ppIter          /* OUT: New iterator */
){
  Fts5Structure *pStruct;
  Fts5Buffer *aBuf;
  const int nBuf = 32;

  void (*xMerge)(Fts5Index*, Fts5Buffer*, Fts5Buffer*);
  void (*xAppend)(Fts5Index*, i64, Fts5Iter*, Fts5Buffer*);
  if( p->pConfig->eDetail==FTS5_DETAIL_NONE ){
    xMerge = fts5MergeRowidLists;
    xAppend = fts5AppendRowid;
  }else{
    xMerge = fts5MergePrefixLists;
    xAppend = fts5AppendPoslist;
  }

  aBuf = (Fts5Buffer*)fts5IdxMalloc(p, sizeof(Fts5Buffer)*nBuf);
  pStruct = fts5StructureRead(p);

  if( aBuf && pStruct ){
    const int flags = FTS5INDEX_QUERY_SCAN 
                    | FTS5INDEX_QUERY_SKIPEMPTY 
                    | FTS5INDEX_QUERY_NOOUTPUT;
    int i;
    i64 iLastRowid = 0;
    Fts5Iter *p1 = 0;     /* Iterator used to gather data from index */
    Fts5Data *pData;
    Fts5Buffer doclist;
    int bNewTerm = 1;

    memset(&doclist, 0, sizeof(doclist));
    fts5MultiIterNew(p, pStruct, flags, pColset, pToken, nToken, -1, 0, &p1);
    fts5IterSetOutputCb(&p->rc, p1);
    for( /* no-op */ ;
        fts5MultiIterEof(p, p1)==0;
        fts5MultiIterNext2(p, p1, &bNewTerm)
    ){
      Fts5SegIter *pSeg = &p1->aSeg[ p1->aFirst[1].iFirst ];
      int nTerm = pSeg->term.n;
      const u8 *pTerm = pSeg->term.p;
      p1->xSetOutputs(p1, pSeg);

      assert_nc( memcmp(pToken, pTerm, MIN(nToken, nTerm))<=0 );
      if( bNewTerm ){
        if( nTerm<nToken || memcmp(pToken, pTerm, nToken) ) break;
      }

      if( p1->base.nData==0 ) continue;

      if( p1->base.iRowid<=iLastRowid && doclist.n>0 ){
        for(i=0; p->rc==SQLITE_OK && doclist.n; i++){
          assert( i<nBuf );
          if( aBuf[i].n==0 ){
            fts5BufferSwap(&doclist, &aBuf[i]);
            fts5BufferZero(&doclist);
          }else{
            xMerge(p, &doclist, &aBuf[i]);
            fts5BufferZero(&aBuf[i]);
          }
        }
        iLastRowid = 0;
      }

      xAppend(p, p1->base.iRowid-iLastRowid, p1, &doclist);
      iLastRowid = p1->base.iRowid;

    }

    for(i=0; i<nBuf; i++){
      if( p->rc==SQLITE_OK ){
        xMerge(p, &doclist, &aBuf[i]);
      }
      fts5BufferFree(&aBuf[i]);

** to the database. Additionally, assume that the contents of the %_data
** table may have changed on disk. So any in-memory caches of %_data 
** records must be invalidated.
*/
int sqlite3Fts5IndexRollback(Fts5Index *p){
  fts5CloseReader(p);
  fts5IndexDiscardData(p);
  /* assert( p->rc==SQLITE_OK ); */
  return SQLITE_OK;
}

/*
** The %_data table is completely empty when this function is called. This
** function populates it with the initial structure objects for each index,
** and the initial version of the "averages" record (a zero-byte blob).

  Fts5Index *p,                   /* FTS index to query */
  const char *pToken, int nToken, /* Token (or prefix) to query for */
  int flags,                      /* Mask of FTS5INDEX_QUERY_X flags */
  Fts5Colset *pColset,            /* Match these columns only */
  Fts5IndexIter **ppIter          /* OUT: New iterator object */
){
  Fts5Config *pConfig = p->pConfig;
  Fts5Iter *pRet = 0;

  Fts5Buffer buf = {0, 0, 0};

  /* If the QUERY_SCAN flag is set, all other flags must be clear. */
  assert( (flags & FTS5INDEX_QUERY_SCAN)==0 || flags==FTS5INDEX_QUERY_SCAN );

  if( sqlite3Fts5BufferSize(&p->rc, &buf, nToken+1)==0 ){
    int iIdx = 0;                 /* Index to search */
    memcpy(&buf.p[1], pToken, nToken);


    /* Figure out which index to search and set iIdx accordingly. If this
    ** is a prefix query for which there is no prefix index, set iIdx to
    ** greater than pConfig->nPrefix to indicate that the query will be
    ** satisfied by scanning multiple terms in the main index.
    **
    ** If the QUERY_TEST_NOIDX flag was specified, then this must be a
    ** prefix-query. Instead of using a prefix-index (if one exists), 
    ** evaluate the prefix query using the main FTS index. This is used
    ** for internal sanity checking by the integrity-check in debug 
    ** mode only.  */
#ifdef SQLITE_DEBUG
    if( pConfig->bPrefixIndex==0 || (flags & FTS5INDEX_QUERY_TEST_NOIDX) ){
      assert( flags & FTS5INDEX_QUERY_PREFIX );
      iIdx = 1+pConfig->nPrefix;
    }else
#endif
    if( flags & FTS5INDEX_QUERY_PREFIX ){
      int nChar = fts5IndexCharlen(pToken, nToken);
      for(iIdx=1; iIdx<=pConfig->nPrefix; iIdx++){
        if( pConfig->aPrefix[iIdx-1]==nChar ) break;
      }
    }

    if( iIdx<=pConfig->nPrefix ){
      /* Straight index lookup */
      Fts5Structure *pStruct = fts5StructureRead(p);
      buf.p[0] = (u8)(FTS5_MAIN_PREFIX + iIdx);
      if( pStruct ){
        fts5MultiIterNew(p, pStruct, flags | FTS5INDEX_QUERY_SKIPEMPTY, 
            pColset, buf.p, nToken+1, -1, 0, &pRet
        );
        fts5StructureRelease(pStruct);
      }
    }else{
      /* Scan multiple terms in the main index */
      int bDesc = (flags & FTS5INDEX_QUERY_DESC)!=0;
      buf.p[0] = FTS5_MAIN_PREFIX;
      fts5SetupPrefixIter(p, bDesc, buf.p, nToken+1, pColset, &pRet);
      assert( pRet->pColset==0 );
      fts5IterSetOutputCb(&p->rc, pRet);
      if( p->rc==SQLITE_OK ){
        Fts5SegIter *pSeg = &pRet->aSeg[pRet->aFirst[1].iFirst];
        if( pSeg->pLeaf ) pRet->xSetOutputs(pRet, pSeg);
      }
    }

    if( p->rc ){
      sqlite3Fts5IterClose(&pRet->base);
      pRet = 0;
      fts5CloseReader(p);
    }

    *ppIter = &pRet->base;
    sqlite3Fts5BufferFree(&buf);
  }
  return fts5IndexReturn(p);
}

/*
** Return true if the iterator passed as the only argument is at EOF.
*/





/*
** Move to the next matching rowid. 
*/
int sqlite3Fts5IterNext(Fts5IndexIter *pIndexIter){
  Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
  assert( pIter->pIndex->rc==SQLITE_OK );
  fts5MultiIterNext(pIter->pIndex, pIter, 0, 0);
  return fts5IndexReturn(pIter->pIndex);
}

/*
** Move to the next matching term/rowid. Used by the fts5vocab module.
*/
int sqlite3Fts5IterNextScan(Fts5IndexIter *pIndexIter){
  Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
  Fts5Index *p = pIter->pIndex;

  assert( pIter->pIndex->rc==SQLITE_OK );

  fts5MultiIterNext(p, pIter, 0, 0);
  if( p->rc==SQLITE_OK ){
    Fts5SegIter *pSeg = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
    if( pSeg->pLeaf && pSeg->term.p[0]!=FTS5_MAIN_PREFIX ){
      fts5DataRelease(pSeg->pLeaf);
      pSeg->pLeaf = 0;
      pIter->base.bEof = 1;
    }
  }

  return fts5IndexReturn(pIter->pIndex);
}

/*
** Move to the next matching rowid that occurs at or after iMatch. The
** definition of "at or after" depends on whether this iterator iterates
** in ascending or descending rowid order.
*/
int sqlite3Fts5IterNextFrom(Fts5IndexIter *pIndexIter, i64 iMatch){
  Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
  fts5MultiIterNextFrom(pIter->pIndex, pIter, iMatch);
  return fts5IndexReturn(pIter->pIndex);
}








/*
** Return the current term.
*/
const char *sqlite3Fts5IterTerm(Fts5IndexIter *pIndexIter, int *pn){
  int n;
  const char *z = (const char*)fts5MultiIterTerm((Fts5Iter*)pIndexIter, &n);
  *pn = n-1;
  return &z[1];
}

































































































/*
** Close an iterator opened by an earlier call to sqlite3Fts5IndexQuery().
*/
void sqlite3Fts5IterClose(Fts5IndexIter *pIndexIter){
  if( pIndexIter ){
    Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
    Fts5Index *pIndex = pIter->pIndex;
    fts5MultiIterFree(pIter->pIndex, pIter);
    fts5CloseReader(pIndex);
  }
}

/*

  const char *z,                  /* Index key to query for */
  int n,                          /* Size of index key in bytes */
  int flags,                      /* Flags for Fts5IndexQuery */
  u64 *pCksum                     /* IN/OUT: Checksum value */
){
  int eDetail = p->pConfig->eDetail;
  u64 cksum = *pCksum;
  Fts5IndexIter *pIter = 0;

  int rc = sqlite3Fts5IndexQuery(p, z, n, flags, 0, &pIter);

  while( rc==SQLITE_OK && 0==sqlite3Fts5IterEof(pIter) ){
    i64 rowid = pIter->iRowid;

    if( eDetail==FTS5_DETAIL_NONE ){
      cksum ^= sqlite3Fts5IndexEntryCksum(rowid, 0, 0, iIdx, z, n);
    }else{


      Fts5PoslistReader sReader;
      for(sqlite3Fts5PoslistReaderInit(pIter->pData, pIter->nData, &sReader);
          sReader.bEof==0;
          sqlite3Fts5PoslistReaderNext(&sReader)
      ){
        int iCol = FTS5_POS2COLUMN(sReader.iPos);
        int iOff = FTS5_POS2OFFSET(sReader.iPos);
        cksum ^= sqlite3Fts5IndexEntryCksum(rowid, iCol, iOff, iIdx, z, n);

      }
    }
    if( rc==SQLITE_OK ){
      rc = sqlite3Fts5IterNext(pIter);
    }
  }
  sqlite3Fts5IterClose(pIter);


  *pCksum = cksum;
  return rc;
}


/*

** error, or some other SQLite error code if another error (e.g. OOM)
** occurs.
*/
int sqlite3Fts5IndexIntegrityCheck(Fts5Index *p, u64 cksum){
  int eDetail = p->pConfig->eDetail;
  u64 cksum2 = 0;                 /* Checksum based on contents of indexes */
  Fts5Buffer poslist = {0,0,0};   /* Buffer used to hold a poslist */
  Fts5Iter *pIter;                /* Used to iterate through entire index */
  Fts5Structure *pStruct;         /* Index structure */

#ifdef SQLITE_DEBUG
  /* Used by extra internal tests only run if NDEBUG is not defined */
  u64 cksum3 = 0;                 /* Checksum based on contents of indexes */
  Fts5Buffer term = {0,0,0};      /* Buffer used to hold most recent term */
#endif
  const int flags = FTS5INDEX_QUERY_NOOUTPUT;
  
  /* Load the FTS index structure */
  pStruct = fts5StructureRead(p);

  /* Check that the internal nodes of each segment match the leaves */
  if( pStruct ){
    int iLvl, iSeg;

  ** variable cksum2) based on entries extracted from the full-text index
  ** while doing a linear scan of each individual index in turn. 
  **
  ** As each term visited by the linear scans, a separate query for the
  ** same term is performed. cksum3 is calculated based on the entries
  ** extracted by these queries.
  */
  for(fts5MultiIterNew(p, pStruct, flags, 0, 0, 0, -1, 0, &pIter);
      fts5MultiIterEof(p, pIter)==0;
      fts5MultiIterNext(p, pIter, 0, 0)
  ){
    int n;                      /* Size of term in bytes */
    i64 iPos = 0;               /* Position read from poslist */
    int iOff = 0;               /* Offset within poslist */
    i64 iRowid = fts5MultiIterRowid(pIter);

#define FTS5_BI_ORDER_RANK   0x0020
#define FTS5_BI_ORDER_ROWID  0x0040
#define FTS5_BI_ORDER_DESC   0x0080

/*
** Values for Fts5Cursor.csrflags
*/
#define FTS5CSR_EOF               0x01
#define FTS5CSR_REQUIRE_CONTENT   0x02
#define FTS5CSR_REQUIRE_DOCSIZE   0x04
#define FTS5CSR_REQUIRE_INST      0x08

#define FTS5CSR_FREE_ZRANK        0x10
#define FTS5CSR_REQUIRE_RESEEK    0x20
#define FTS5CSR_REQUIRE_POSLIST   0x40

#define BitFlagAllTest(x,y) (((x) & (y))==(y))
#define BitFlagTest(x,y)    (((x) & (y))!=0)

  aColMap[1] = pConfig->nCol;
  aColMap[2] = pConfig->nCol+1;

  /* Set idxFlags flags for all WHERE clause terms that will be used. */
  for(i=0; i<pInfo->nConstraint; i++){
    struct sqlite3_index_constraint *p = &pInfo->aConstraint[i];
    int j;
    for(j=0; j<ArraySize(aConstraint); j++){
      struct Constraint *pC = &aConstraint[j];
      if( p->iColumn==aColMap[pC->iCol] && p->op & pC->op ){
        if( p->usable ){
          pC->iConsIndex = i;
          idxFlags |= pC->fts5op;
        }else if( j==0 ){
          /* As there exists an unusable MATCH constraint this is an 

    pInfo->estimatedCost = bHasMatch ? 750.0 : 750000.0;
  }else{
    pInfo->estimatedCost = bHasMatch ? 1000.0 : 1000000.0;
  }

  /* Assign argvIndex values to each constraint in use. */
  iNext = 1;
  for(i=0; i<ArraySize(aConstraint); i++){
    struct Constraint *pC = &aConstraint[i];
    if( pC->iConsIndex>=0 ){
      pInfo->aConstraintUsage[pC->iConsIndex].argvIndex = iNext++;
      pInfo->aConstraintUsage[pC->iConsIndex].omit = (unsigned char)pC->omit;
    }
  }

  assert( *pbSkip==0 );
  if( CsrFlagTest(pCsr, FTS5CSR_REQUIRE_RESEEK) ){
    Fts5Table *pTab = (Fts5Table*)(pCsr->base.pVtab);
    int bDesc = pCsr->bDesc;
    i64 iRowid = sqlite3Fts5ExprRowid(pCsr->pExpr);

    rc = sqlite3Fts5ExprFirst(pCsr->pExpr, pTab->pIndex, iRowid, bDesc);
    if( rc==SQLITE_OK &&  iRowid!=sqlite3Fts5ExprRowid(pCsr->pExpr) ){
      *pbSkip = 1;
    }

    CsrFlagClear(pCsr, FTS5CSR_REQUIRE_RESEEK);
    fts5CsrNewrow(pCsr);
    if( sqlite3Fts5ExprEof(pCsr->pExpr) ){
      CsrFlagSet(pCsr, FTS5CSR_EOF);
      *pbSkip = 1;
    }
  }
  return rc;
}


/*
** Advance the cursor to the next row in the table that matches the 
** search criteria.
**
** Return SQLITE_OK if nothing goes wrong.  SQLITE_OK is returned
** even if we reach end-of-file.  The fts5EofMethod() will be called
** subsequently to determine whether or not an EOF was hit.
*/
static int fts5NextMethod(sqlite3_vtab_cursor *pCursor){
  Fts5Cursor *pCsr = (Fts5Cursor*)pCursor;
  int rc;

  assert( (pCsr->ePlan<3)==
          (pCsr->ePlan==FTS5_PLAN_MATCH || pCsr->ePlan==FTS5_PLAN_SOURCE) 
  );
  assert( !CsrFlagTest(pCsr, FTS5CSR_EOF) );

  if( pCsr->ePlan<3 ){
    int bSkip = 0;
    if( (rc = fts5CursorReseek(pCsr, &bSkip)) || bSkip ) return rc;
    rc = sqlite3Fts5ExprNext(pCsr->pExpr, pCsr->iLastRowid);
    CsrFlagSet(pCsr, sqlite3Fts5ExprEof(pCsr->pExpr));


    fts5CsrNewrow(pCsr);
  }else{
    switch( pCsr->ePlan ){
      case FTS5_PLAN_SPECIAL: {
        CsrFlagSet(pCsr, FTS5CSR_EOF);
        rc = SQLITE_OK;
        break;
      }
  
      case FTS5_PLAN_SORTED_MATCH: {
        rc = fts5SorterNext(pCsr);
        break;
      }

*/
int sqlite3Fts5StorageClose(Fts5Storage *p){
  int rc = SQLITE_OK;
  if( p ){
    int i;

    /* Finalize all SQL statements */
    for(i=0; i<ArraySize(p->aStmt); i++){
      sqlite3_finalize(p->aStmt[i]);
    }

    sqlite3_free(p);
  }
  return rc;
}

    { "ascii",     {fts5AsciiCreate, fts5AsciiDelete, fts5AsciiTokenize }},
    { "porter",    {fts5PorterCreate, fts5PorterDelete, fts5PorterTokenize }},
  };
  
  int rc = SQLITE_OK;             /* Return code */
  int i;                          /* To iterate through builtin functions */

  for(i=0; rc==SQLITE_OK && i<ArraySize(aBuiltin); i++){
    rc = pApi->xCreateTokenizer(pApi,
        aBuiltin[i].zName,
        (void*)pApi,
        &aBuiltin[i].x,
        0
    );
  }

    return 2;
  }
  return fts5PutVarint64(p,v);
}


int sqlite3Fts5GetVarintLen(u32 iVal){
#if 0
  if( iVal<(1 << 7 ) ) return 1;
#endif
  assert( iVal>=(1 << 7) );
  if( iVal<(1 << 14) ) return 2;
  if( iVal<(1 << 21) ) return 3;
  if( iVal<(1 << 28) ) return 4;
  return 5;
}

    const char *zType = bDb ? argv[5] : argv[4];
    int nDb = (int)strlen(zDb)+1; 
    int nTab = (int)strlen(zTab)+1;
    int eType = 0;
    
    rc = fts5VocabTableType(zType, pzErr, &eType);
    if( rc==SQLITE_OK ){
      assert( eType>=0 && eType<ArraySize(azSchema) );
      rc = sqlite3_declare_vtab(db, azSchema[eType]);
    }

    nByte = sizeof(Fts5VocabTable) + nDb + nTab;
    pRet = sqlite3Fts5MallocZero(&rc, nByte);
    if( pRet ){
      pRet->pGlobal = (Fts5Global*)pAux;

      sqlite3Fts5BufferSet(&rc, &pCsr->term, nTerm, (const u8*)zTerm);
      memset(pCsr->aCnt, 0, nCol * sizeof(i64));
      memset(pCsr->aDoc, 0, nCol * sizeof(i64));
      pCsr->iCol = 0;

      assert( pTab->eType==FTS5_VOCAB_COL || pTab->eType==FTS5_VOCAB_ROW );
      while( rc==SQLITE_OK ){

        const u8 *pPos; int nPos;   /* Position list */
        i64 iPos = 0;               /* 64-bit position read from poslist */
        int iOff = 0;               /* Current offset within position list */

        pPos = pCsr->pIter->pData;
        nPos = pCsr->pIter->nData;
        switch( pCsr->pConfig->eDetail ){
          case FTS5_DETAIL_FULL:
            pPos = pCsr->pIter->pData;
            nPos = pCsr->pIter->nData;

            if( pTab->eType==FTS5_VOCAB_ROW ){
              while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){
                pCsr->aCnt[0]++;
              }
              pCsr->aDoc[0]++;
            }else{
              int iCol = -1;
              while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){
                int ii = FTS5_POS2COLUMN(iPos);
                pCsr->aCnt[ii]++;
                if( iCol!=ii ){
                  if( ii>=nCol ){
                    rc = FTS5_CORRUPT;
                    break;
                  }
                  pCsr->aDoc[ii]++;
                  iCol = ii;

                }
              }
            }
            break;

          case FTS5_DETAIL_COLUMNS:
            if( pTab->eType==FTS5_VOCAB_ROW ){
              pCsr->aDoc[0]++;
            }else{



              while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff,&iPos) ){
                assert_nc( iPos>=0 && iPos<nCol );
                if( iPos>=nCol ){
                  rc = FTS5_CORRUPT;
                  break;
                }
                pCsr->aDoc[iPos]++;
              }


            }
            break;

          default: 
            assert( pCsr->pConfig->eDetail==FTS5_DETAIL_NONE );
            pCsr->aDoc[0]++;
            break;

  for {set i 0} {$i < [$cmd xPhraseCount]} {incr i} {
    $cmd xPhraseForeach $i c o {
      lappend res $i.$c.$o
    }
  }

  #set res
  sort_poslist $res
}

proc fts5_test_collist {cmd} {
  set res [list]

  for {set i 0} {$i < [$cmd xPhraseCount]} {incr i} {
    $cmd xPhraseColumnForeach $i c { lappend res $i.$c }

  do_execsql_test 1.$tn2.integrity {
    INSERT INTO xx(xx) VALUES('integrity-check');
  }

  #-------------------------------------------------------------------------
  #
  foreach {tn expr} {

    1.1 "a   AND b"
    1.2 "a   OR b"
    1.3 "o"
    1.4 "b q"
    1.5 "e a e"
    1.6 "m d g q q b k b w f q q p p"
    1.7 "l o o l v v k"
    1.8 "a"
    1.9 "b"

    }

    set res [fts5_query_data $expr xx]
    do_execsql_test 1.$tn2.$tn.[llength $res].asc {
      SELECT rowid, fts5_test_poslist(xx), fts5_test_collist(xx) 
      FROM xx WHERE xx match $expr
    } $res


    set res [fts5_query_data $expr xx DESC]
    do_execsql_test 1.$tn2.$tn.[llength $res].desc {
      SELECT rowid, fts5_test_poslist(xx), fts5_test_collist(xx) 
      FROM xx WHERE xx match $expr ORDER BY 1 DESC
    } $res
  }

# 2014 June 17
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#*************************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is testing the FTS5 module.
#
# More specifically, the focus is on testing prefix queries, both with and
# without prefix indexes.
#

source [file join [file dirname [info script]] fts5_common.tcl]
set testprefix fts5ad

# If SQLITE_ENABLE_FTS5 is defined, omit this file.
ifcapable !fts5 {

  5 {detail=',1'}
  6 {detail=''}
} {
  set res [list 1 {malformed detail=... directive}]
  do_catchsql_test 11.$tn "CREATE VIRTUAL TABLE f1 USING fts5(x, $opt)" $res
}

do_catchsql_test 12.1 {
  INSERT INTO t1(t1, rank) VALUES('rank', NULL);;
} {1 {SQL logic error or missing database}}

finish_test

do_execsql_test 2.1 {
  INSERT INTO t2(t2) VALUES('integrity-check');
}

do_execsql_test 2.2 {
  SELECT fts5_test_poslist(t2) FROM t2('aa');
} {0.0.0}

do_execsql_test 2.3 {
  SELECT fts5_test_collist(t2) FROM t2('aa');
} {0.0}

set ::pc 0
#puts [nearset {{ax bx cx}} -pc ::pc -near 10 -- b*]
#exit

#-------------------------------------------------------------------------
# Check that the xInstCount, xInst, xPhraseFirst and xPhraseNext APIs

} -test {
  faultsim_test_result {0 {}} {1 {vtable constructor failed: t1}}
}

reset_db
do_execsql_test 4.0 {
  CREATE VIRTUAL TABLE t2 USING fts5(a, b);
  INSERT INTO t2 VALUES('m f a jj th q gi ar',   'hj n h h sg j i m');
  INSERT INTO t2 VALUES('nr s t g od j kf h',    'sb h aq rg op rb n nl');
  INSERT INTO t2 VALUES('do h h pb p p q fr',    'c rj qs or cr a l i');
  INSERT INTO t2 VALUES('lk gp t i lq mq qm p',  'h mr g f op ld aj h');
  INSERT INTO t2 VALUES('ct d sq kc qi k f j',   'sn gh c of g s qt q');
  INSERT INTO t2 VALUES('d ea d d om mp s ab',   'dm hg l df cm ft pa c');
  INSERT INTO t2 VALUES('tc dk c jn n t sr ge',  'a a kn bc n i af h');
  INSERT INTO t2 VALUES('ie ii d i b sa qo rf',  'a h m aq i b m fn');

  3 { f*  }           {1 3 4 5 6 8 9 10}
  4 { m OR f }        {1 4 5 8 9 10}
  5 { sn + gh }       {5}
  6 { "sn gh" }       {5}
  7 { NEAR(r a, 5) }  {9}
  8 { m* f* }         {1 4 6 8 9 10}
  9 { m* + f* }       {1 8}
  10 { c NOT p }       {5 6 7 10}
} {
  do_faultsim_test 4.$tn -prep {
    faultsim_restore_and_reopen
  } -body "
    execsql { SELECT rowid FROM t2 WHERE t2 MATCH '$expr' }
  " -test "
    faultsim_test_result {[list 0 $res]} {1 {vtable constructor failed: t2}}

# This file is focused on OOM errors.
#

source [file join [file dirname [info script]] fts5_common.tcl]
source $testdir/malloc_common.tcl
set testprefix fts5fault2

# If SQLITE_ENABLE_FTS5 is not defined, omit this file.
ifcapable !fts5 {
  finish_test
  return
}

set doc [string trim [string repeat "x y z " 200]]
do_execsql_test 1.0 {

  CREATE VIRTUAL TABLE xy USING fts5(x);
  INSERT INTO xy(rowid, x) VALUES(1, '1 2 3');
  INSERT INTO xy(rowid, x) VALUES(2, '2 3 4');
  INSERT INTO xy(rowid, x) VALUES(3, '3 4 5');
}
faultsim_save_and_close

do_faultsim_test 2.1 -faults oom-* -prep {
  faultsim_restore_and_reopen
} -body {
  db eval { UPDATE OR REPLACE xy SET rowid=3 WHERE rowid = 2 }
} -test {
  faultsim_test_result {0 {}}
}

# Test fault-injection when an empty expression is parsed.
#
do_faultsim_test 2.2 -faults oom-* -body {
  db eval { SELECT * FROM xy('""') }
} -test {
  faultsim_test_result {0 {}}
}

finish_test

ifcapable !fts5 {
  finish_test
  return
}

foreach_detail_mode $testprefix {

  fts5_aux_test_functions db
  do_execsql_test 1.0 {
    CREATE VIRTUAL TABLE t1 USING fts5(a, b, detail=%DETAIL%);
    INSERT INTO t1 VALUES('a b c d', '1 2 3 4');
    INSERT INTO t1 VALUES('a b a b', NULL);
    INSERT INTO t1 VALUES(NULL, '1 2 1 2');
  }
  
  do_faultsim_test 1 -faults oom-* -body {
    execsql { 
      SELECT rowid, fts5_test_poslist(t1) FROM t1 WHERE t1 MATCH 'b OR 2' 
    }
  } -test {
    faultsim_test_result {0 {1 {0.0.1 1.1.1} 2 {0.0.1 0.0.3} 3 {1.1.1 1.1.3}}} \
                         {1 SQLITE_NOMEM}
  }
  
  do_faultsim_test 2 -faults oom-* -body {

    execsql { INSERT INTO t1(t1) VALUES('integrity-check') }

  } -test {
    faultsim_test_result {0 {}} {1 SQLITE_NOMEM}
  }

  if {[detail_is_none]==0} {
    do_faultsim_test 3 -faults oom-* -body {
      execsql { SELECT rowid FROM t1('b:2') }
    } -test {
      faultsim_test_result {0 {1 3}} {1 SQLITE_NOMEM}
    }
  }
} ;# foreach_detail_mode...

finish_test

# 2016 February 2
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#*************************************************************************
#
# This file is focused on OOM errors.
#

source [file join [file dirname [info script]] fts5_common.tcl]
source $testdir/malloc_common.tcl
set testprefix fts5faultA

# If SQLITE_ENABLE_FTS3 is defined, omit this file.
ifcapable !fts5 {
  finish_test
  return
}

foreach_detail_mode $testprefix {
  do_execsql_test 1.0 {
    CREATE VIRTUAL TABLE o1 USING fts5(a, detail=%DETAIL%);
    INSERT INTO o1(o1, rank) VALUES('pgsz', 32);
  
    WITH s(i) AS ( SELECT 1 UNION ALL SELECT i+1 FROM s WHERE i<300 )
    INSERT INTO o1 SELECT 'A B C' FROM s;
  
    INSERT INTO o1 VALUES('A X C');
  
    WITH s(i) AS ( SELECT 1 UNION ALL SELECT i+1 FROM s WHERE i<300 )
    INSERT INTO o1 SELECT 'A B C' FROM s;
  }
  
  do_faultsim_test 1 -faults oom* -prep {
    sqlite3 db test.db
  } -body {
    execsql { SELECT rowid FROM o1('a NOT b') }
  } -test {
    faultsim_test_result {0 301}
  }
}

do_execsql_test 2.0 {
  CREATE VIRTUAL TABLE o2 USING fts5(a);
  
  INSERT INTO o2 VALUES('A B C');
  WITH s(i) AS ( SELECT 1 UNION ALL SELECT i+1 FROM s WHERE i<300 )
  INSERT INTO o2 SELECT group_concat('A B C ') FROM s;
}

do_faultsim_test 2 -faults oom* -prep {
  sqlite3 db test.db
} -body {
  execsql { SELECT rowid FROM o2('a+b+c NOT xyz') }
} -test {
  faultsim_test_result {0 {1 2}}
}
finish_test

# If SQLITE_ENABLE_FTS5 is defined, omit this file.
ifcapable !fts5 {
  finish_test
  return
}

if 1 {

#-------------------------------------------------------------------------
#
set doc "x x [string repeat {y } 50]z z"
do_execsql_test 1.0 {
  CREATE VIRTUAL TABLE t1 USING fts5(x);
  INSERT INTO t1(t1, rank) VALUES('pgsz', 32);

  INSERT INTO x2 VALUES('ab');
}

do_execsql_test 15.1 {
  INSERT INTO x2(x2) VALUES('integrity-check');
}



#-------------------------------------------------------------------------
foreach_detail_mode $testprefix {
  reset_db
  fts5_aux_test_functions db
  do_execsql_test 16.0 {
    CREATE VIRTUAL TABLE x3 USING fts5(x, detail=%DETAIL%);
    INSERT INTO x3 VALUES('a b c d e f');
  }
  do_execsql_test 16.1 {
    SELECT fts5_test_poslist(x3) FROM x3('(a NOT b) OR c');
  } {2.0.2}

  do_execsql_test 16.1 {
    SELECT fts5_test_poslist(x3) FROM x3('a OR c');
  } {{0.0.0 1.0.2}}
}

}

#-------------------------------------------------------------------------
reset_db
do_execsql_test 17.0 {
  CREATE VIRTUAL TABLE x3 USING fts5(x);
  INSERT INTO x3 VALUES('a b c');
}

do_execsql_test 17.1 {
  SELECT rowid FROM x3('b AND d');
}

#-------------------------------------------------------------------------
do_execsql_test 18.1 {
  CREATE VIRTUAL TABLE x4 USING fts5(x);
  SELECT rowid FROM x4('""');
}

finish_test

# 2015 September 05
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#*************************************************************************
#

source [file join [file dirname [info script]] fts5_common.tcl]
set testprefix fts5simple3

# If SQLITE_ENABLE_FTS5 is defined, omit this file.
ifcapable !fts5 {
  finish_test
  return
}

fts5_aux_test_functions db

do_execsql_test 1.0 {
  CREATE VIRTUAL TABLE t1 USING fts5(a, b, c, detail=col);
  INSERT INTO t1 VALUES('a', 'b', 'c');
  INSERT INTO t1 VALUES('x', 'x', 'x');
}

do_execsql_test 1.1 {
  SELECT rowid, fts5_test_collist(t1) FROM t1('a:a');
} {1 0.0}

do_execsql_test 1.2 {
  SELECT rowid, fts5_test_collist(t1) FROM t1('b:x');
} {2 0.1}

do_execsql_test 1.3 {
  SELECT rowid, fts5_test_collist(t1) FROM t1('b:a');
} {}

#-------------------------------------------------------------------------
# Create detail=col and detail=full tables with 998 columns.
#
foreach_detail_mode $testprefix {
  if {[detail_is_none]} continue

  do_test 2.1 {
    execsql { DROP TABLE IF EXISTS t2 }
    set cols [list]
    set vals [list]
    for {set i 1} {$i <= 998} {incr i} {
      lappend cols "c$i"
      lappend vals "'val$i'"
    }
    execsql "CREATE VIRTUAL TABLE t2 USING fts5(detail=%DETAIL%,[join $cols ,])"
  } {}
  
  do_test 2.2 {
    execsql "INSERT INTO t2 VALUES([join $vals ,])"
  } {}
  
  foreach {tn q res} {
    1 { c1:val1 }     1
    2 { c300:val300 } 1
    3 { c300:val1 } {}
    4 { c1:val300 } {}
  } {
    do_execsql_test 2.3.$tn {
      SELECT rowid FROM t2($q)
    } $res
  }
}

do_execsql_test 3.0 {
  CREATE VIRTUAL TABLE x3 USING fts5(one);
  INSERT INTO x3 VALUES('a b c');
  INSERT INTO x3 VALUES('c b a');
  INSERT INTO x3 VALUES('o t t');
  SELECT * FROM x3('x OR y OR z');
}


finish_test

foreach tok {query document} {
foreach_detail_mode $testprefix {

fts5_tclnum_register db
fts5_aux_test_functions db

proc fts5_test_bothlist {cmd} {

  for {set i 0} {$i < [$cmd xPhraseCount]} {incr i} {
    set bFirst 1
    $cmd xPhraseColumnForeach $i c { 
      lappend CL $i.$c 
      if {$bFirst} { $cmd xPhraseForeach $i c o { lappend PL $i.$c.$o } }
      set bFirst 0
    }
  }

  list [sort_poslist $PL] $CL
}
sqlite3_fts5_create_function db fts5_test_bothlist fts5_test_bothlist

proc fts5_rowid {cmd} { expr [$cmd xColumnText -1] }
sqlite3_fts5_create_function db fts5_rowid fts5_rowid

do_execsql_test 1.$tok.0.1 "
  CREATE VIRTUAL TABLE ss USING fts5(a, b, 
       tokenize='tclnum $tok', detail=%DETAIL%);
  INSERT INTO ss(ss, rank) VALUES('rank', 'fts5_rowid()');

  INSERT INTO ss VALUES('eight vii eight six 3', 'i vii 1 six 9 vii');
  INSERT INTO ss VALUES('9 0 viii viii five', 'i 1 viii ix 3 4');
  INSERT INTO ss VALUES('three nine 5 nine viii four zero', 'ii i 1 5 2 viii');
  INSERT INTO ss VALUES('5 vii three 9 four', 'three five one 7 2 eight one');
}

foreach {tn expr} {
  2.1 "one OR two OR three OR four"

  1.1 "one"   1.2 "two"   1.3 "three"   1.4 "four"
  1.5 "v"     1.6 "vi"    1.7 "vii"     1.8 "viii"
  1.9 "9"    1.10 "0"    1.11 "1"      1.12 "2"

  2.1 "one OR two OR three OR four"
  2.2 "(one AND two) OR (three AND four)"
  2.3 "(one AND two) OR (three AND four) NOT five"

  if {[fts5_expr_ok $expr ss]==0} {
    do_test 1.$tok.$tn.OMITTED { list } [list]
    continue
  }

  set res [fts5_query_data $expr ss ASC ::tclnum_syn]
  do_execsql_test 1.$tok.$tn.[llength $res].asc.1 {
    SELECT rowid, fts5_test_poslist2(ss), fts5_test_collist(ss) FROM ss($expr)
  } $res

  do_execsql_test 1.$tok.$tn.[llength $res].asc.2 {
    SELECT rowid, fts5_test_poslist(ss), fts5_test_collist(ss) FROM ss($expr)
  } $res

  do_execsql_test 1.$tok.$tn.[llength $res].asc.2 {
    SELECT rowid, fts5_test_poslist2(ss), fts5_test_collist(ss) FROM ss($expr)
    ORDER BY rank ASC
  } $res

  set res2 [list]
  foreach {a b c} $res { lappend res2 $a $c $b }
  do_execsql_test 1.$tok.$tn.[llength $res].asc.3 {
    SELECT rowid, fts5_test_collist(ss), fts5_test_poslist2(ss) FROM ss($expr)
  } $res2

  set res3 [list]
  foreach {a b c} $res { lappend res3 $a [list $b $c] }
  do_execsql_test 1.$tok.$tn.[llength $res].asc.3 {
    SELECT rowid, fts5_test_bothlist(ss) FROM ss($expr)
  } $res3


}

}
}

finish_test

set Q {
  {1   "SELECT count(*) FROM t1 WHERE t1 MATCH 'enron'"}
  {25  "SELECT count(*) FROM t1 WHERE t1 MATCH 'hours'"}
  {300 "SELECT count(*) FROM t1 WHERE t1 MATCH 'acid'"}
  {100 "SELECT count(*) FROM t1 WHERE t1 MATCH 'loaned OR mobility OR popcore OR sunk'"}
  {100 "SELECT count(*) FROM t1 WHERE t1 MATCH 'enron AND myapps'"}
  {1   "SELECT count(*) FROM t1 WHERE t1 MATCH 'en* AND my*'"}

  {1   "SELECT count(*) FROM t1 WHERE t1 MATCH 'c:t*'"}
  {1   "SELECT count(*) FROM t1 WHERE t1 MATCH 'a:t* OR b:t* OR c:t* OR d:t* OR e:t* OR f:t* OR g:t*'"}
  {1   "SELECT count(*) FROM t1 WHERE t1 MATCH 'a:t*'"}
  {2   "SELECT count(*) FROM t1 WHERE t1 MATCH 'c:the'"}

  {2   "SELECT count(*) FROM t1 WHERE t1 MATCH 'd:holmes OR e:holmes OR f:holmes OR g:holmes'" }
  {2   "SELECT count(*) FROM t1 WHERE t1 MATCH 'd:holmes AND e:holmes AND f:holmes AND g:holmes'" }
  {4   "SELECT count(*) FROM t1 WHERE t1 MATCH 'd:holmes NOT e:holmes'" }
}

proc usage {} {
  global Q
  puts stderr "Usage: $::argv0 DATABASE QUERY"
  puts stderr ""
  for {set i 1} {$i <= [llength $Q]} {incr i} {

##########################################################################
# 2016 Jan 27
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
proc process_cmdline {} { 
  cmdline::process ::A $::argv {


    {fts5                 "use fts5 (this is the default)"}
    {fts4                 "use fts4"}
    {colsize   "10 10 10" "list of column sizes"}
    {tblname   "t1"       "table name to create"}
    {detail    "full"     "Fts5 detail mode to use"}
    {repeat    1          "Load each file this many times"}
    {prefix    ""         "Fts prefix= option"}
    database
    file...
  } {
  This script is designed to create fts4/5 tables with more than one column.
  The -colsize option should be set to a Tcl list of integer values, one for
  each column in the table. Each value is the number of tokens that will be
  inserted into the column value for each row. For example, setting the -colsize
  option to "5 10" creates an FTS table with 2 columns, with roughly 5 and 10
  tokens per row in each, respectively.
  
  Each "FILE" argument should be a text file. The contents of these text files
  is split on whitespace characters to form a list of tokens. The first N1
  tokens are used for the first column of the first row, where N1 is the first
  element of the -colsize list. The next N2 are used for the second column of
  the first row, and so on. Rows are added to the table until the entire list
  of tokens is exhausted.
  }
}

###########################################################################
###########################################################################
# Command line options processor. This is generic code that can be copied
# between scripts.
#
namespace eval cmdline {
  proc cmdline_error {O E {msg ""}} {
    if {$msg != ""} {
      puts stderr "Error: $msg"
      puts stderr ""
    }
  
    set L [list]
    foreach o $O {
      if {[llength $o]==1} {
        lappend L [string toupper $o]
      }
    }
  
    puts stderr "Usage: $::argv0 ?SWITCHES? $L"
    puts stderr ""
    puts stderr "Switches are:"
    foreach o $O {
      if {[llength $o]==3} {
        foreach {a b c} $o {}
        puts stderr [format "    -%-15s %s (default \"%s\")" "$a VAL" $c $b]
      } elseif {[llength $o]==2} {
        foreach {a b} $o {}
        puts stderr [format "    -%-15s %s" $a $b]
      }
    }
    puts stderr ""
    puts stderr $E
    exit -1
  }
  
  proc process {avar lArgs O E} {
    upvar $avar A
    set zTrailing ""       ;# True if ... is present in $O
    set lPosargs [list]
  
    # Populate A() with default values. Also, for each switch in the command
    # line spec, set an entry in the idx() array as follows:
    #
    #  {tblname t1 "table name to use"}  
    #      -> [set idx(-tblname) {tblname t1 "table name to use"}  
    #

    # For each position parameter, append its name to $lPosargs. If the ...
    # specifier is present, set $zTrailing to the name of the prefix.
    #
    foreach o $O {
      set nm [lindex $o 0]
      set nArg [llength $o]
      switch -- $nArg {
        1 {
          if {[string range $nm end-2 end]=="..."} {
            set zTrailing [string range $nm 0 end-3]
          } else {
            lappend lPosargs $nm
          }

        }
        2 {
          set A($nm) 0
          set idx(-$nm) $o
        }
        3 {
          set A($nm) [lindex $o 1]
          set idx(-$nm) $o
        }
        default {
          error "Error in command line specification"
        }
      }
    }
  
    # Set explicitly specified option values
    #
    set nArg [llength $lArgs]
    for {set i 0} {$i < $nArg} {incr i} {
      set opt [lindex $lArgs $i]
      if {[string range $opt 0 0]!="-" || $opt=="--"} break
      set c [array names idx "${opt}*"]
      if {[llength $c]==0} { cmdline_error $O $E "Unrecognized option: $opt"}
      if {[llength $c]>1}  { cmdline_error $O $E "Ambiguous option: $opt"}
  

      if {[llength $idx($c)]==3} {
        if {$i==[llength $lArgs]-1} {
          cmdline_error $O $E "Option requires argument: $c" 
        }
        incr i
        set A([lindex $idx($c) 0]) [lindex $lArgs $i]
      } else {
        set A([lindex $idx($c) 0]) 1
      }
    }
  
    # Deal with position arguments.
    #
    set nPosarg [llength $lPosargs]
    set nRem [expr $nArg - $i]
    if {$nRem < $nPosarg || ($zTrailing=="" && $nRem > $nPosarg)} {
      cmdline_error $O $E
    }
    for {set j 0} {$j < $nPosarg} {incr j} {
      set A([lindex $lPosargs $j]) [lindex $lArgs [expr $j+$i]]
    }
    if {$zTrailing!=""} {
      set A($zTrailing) [lrange $lArgs [expr $j+$i] end]
    }
  }
} ;# namespace eval cmdline
# End of command line options processor.
###########################################################################
###########################################################################

process_cmdline

# If -fts4 was specified, use fts4. Otherwise, fts5.
if {$A(fts4)} {
  set A(fts) fts4
} else {
  set A(fts) fts5
}

sqlite3 db $A(database)

# Create the FTS table in the db. Return a list of the table columns.
#
proc create_table {} {
  global A
  set cols [list a b c d e f g h i j k l m n o p q r s t u v w x y z]

  set nCol [llength $A(colsize)]
  set cols [lrange $cols 0 [expr $nCol-1]]

  set sql    "CREATE VIRTUAL TABLE IF NOT EXISTS $A(tblname) USING $A(fts) ("
  append sql [join $cols ,]
  if {$A(fts)=="fts5"} { append sql ",detail=$A(detail)" }
  append sql ", prefix='$A(prefix)');"

  db eval $sql
  return $cols
}

# Return a list of tokens from the named file.
#
proc readfile {file} {
  set fd [open $file]
  set data [read $fd]
  close $fd
  split $data
}

proc repeat {L n} {
  set res [list]
  for {set i 0} {$i < $n} {incr i} {
    set res [concat $res $L]
  }
  set res
}


# Load all the data into a big list of tokens.
#
set tokens [list]
foreach f $A(file) {
  set tokens [concat $tokens [repeat [readfile $f] $A(repeat)]]
}

set N [llength $tokens]
set i 0
set cols [create_table]
set sql "INSERT INTO $A(tblname) VALUES(\$R([lindex $cols 0])"
foreach c [lrange $cols 1 end] {
  append sql ", \$R($c)"
}
append sql ")"

db eval BEGIN
  while {$i < $N} {
    foreach c $cols s $A(colsize) {
      set R($c) [lrange $tokens $i [expr $i+$s-1]]
      incr i $s
    }
    db eval $sql
  }
db eval COMMIT

** string.
*/
static void jsonAppendString(JsonString *p, const char *zIn, u32 N){
  u32 i;
  if( (N+p->nUsed+2 >= p->nAlloc) && jsonGrow(p,N+2)!=0 ) return;
  p->zBuf[p->nUsed++] = '"';
  for(i=0; i<N; i++){
    unsigned char c = ((unsigned const char*)zIn)[i];
    if( c=='"' || c=='\\' ){
      json_simple_escape:
      if( (p->nUsed+N+3-i > p->nAlloc) && jsonGrow(p,N+3-i)!=0 ) return;
      p->zBuf[p->nUsed++] = '\\';
    }else if( c<=0x1f ){
      static const char aSpecial[] = {
         0, 0, 0, 0, 0, 0, 0, 0, 'b', 't', 'n', 0, 'f', 'r', 0, 0,
         0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0, 0,   0,   0, 0, 0
      };
      assert( sizeof(aSpecial)==32 );
      assert( aSpecial['\b']=='b' );
      assert( aSpecial['\f']=='f' );
      assert( aSpecial['\n']=='n' );
      assert( aSpecial['\r']=='r' );
      assert( aSpecial['\t']=='t' );
      if( aSpecial[c] ){
        c = aSpecial[c];
        goto json_simple_escape;
      }
      if( (p->nUsed+N+7+i > p->nAlloc) && jsonGrow(p,N+7-i)!=0 ) return;
      p->zBuf[p->nUsed++] = '\\';
      p->zBuf[p->nUsed++] = 'u';
      p->zBuf[p->nUsed++] = '0';
      p->zBuf[p->nUsed++] = '0';
      p->zBuf[p->nUsed++] = '0' + (c>>4);
      c = "0123456789abcdef"[c&0xf];
    }
    p->zBuf[p->nUsed++] = c;
  }
  p->zBuf[p->nUsed++] = '"';
  assert( p->nUsed<p->nAlloc );
}

        jsonAppendString(p, z, n);
      }
      break;
    }
    default: {
      if( p->bErr==0 ){
        sqlite3_result_error(p->pCtx, "JSON cannot hold BLOB values", -1);
        p->bErr = 2;
        jsonReset(p);
      }
      break;
    }
  }
}

static void jsonArrayFinal(sqlite3_context *ctx){
  JsonString *pStr;
  pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0);
  if( pStr ){
    pStr->pCtx = ctx;
    jsonAppendChar(pStr, ']');
    if( pStr->bErr ){
      if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx);
      assert( pStr->bStatic );
    }else{
      sqlite3_result_text(ctx, pStr->zBuf, pStr->nUsed,
                          pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free);
      pStr->bStatic = 1;
    }
  }else{

}
static void jsonObjectFinal(sqlite3_context *ctx){
  JsonString *pStr;
  pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0);
  if( pStr ){
    jsonAppendChar(pStr, '}');
    if( pStr->bErr ){
      if( pStr->bErr==0 ) sqlite3_result_error_nomem(ctx);
      assert( pStr->bStatic );
    }else{
      sqlite3_result_text(ctx, pStr->zBuf, pStr->nUsed,
                          pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free);
      pStr->bStatic = 1;
    }
  }else{

**   * Omit K in KN or G in GN at the beginning of a word
**
** Space to hold the result is obtained from sqlite3_malloc()
**
** Return NULL if memory allocation fails.  
*/
static unsigned char *phoneticHash(const unsigned char *zIn, int nIn){
  unsigned char *zOut = sqlite3_malloc64( nIn + 1 );
  int i;
  int nOut = 0;
  char cPrev = 0x77;
  char cPrevX = 0x77;
  const unsigned char *aClass = initClass;

  if( zOut==0 ) return 0;

  char cAnext, cBnext;   /* Next character in zA and zB */
  int d;                 /* North-west cost value */
  int dc = 0;            /* North-west character value */
  int res;               /* Final result */
  int *m;                /* The cost matrix */
  char *cx;              /* Corresponding character values */
  int *toFree = 0;       /* Malloced space */

  int nMatch = 0;
  int mStack[60+15];     /* Stack space to use if not too much is needed */

  /* Early out if either input is NULL */
  if( zA==0 || zB==0 ) return -1;

  /* Skip any common prefix */
  while( zA[0] && zA[0]==zB[0] ){ dc = zA[0]; zA++; zB++; nMatch++; }
  if( pnMatch ) *pnMatch = nMatch;

  /* A is a prefix of B */
  if( zA[0]=='*' && zA[1]==0 ) return 0;

  /* Allocate and initialize the Wagner matrix */
  if( nB<(sizeof(mStack)*4)/(sizeof(mStack[0])*5) ){
    m = mStack;
  }else{
    m = toFree = sqlite3_malloc64( (nB+1)*5*sizeof(m[0])/4 );
    if( m==0 ) return -3;
  }
  cx = (char*)&m[nB+1];

  /* Compute the Wagner edit distance */
  m[0] = 0;
  cx[0] = dc;