REM NOTE: Using the MSVC platform name, lookup the simpler platform name to
  REM       be used for the name of the platform-specific binary directory via
  REM       the environment variables setup earlier.
  REM
  CALL :fn_CopyVariable %%P_NAME PLATFORMNAME

  REM
  REM NOTE: This is the inner loop.  There should be exactly one iteration.
  REM       This loop is necessary because the PlatformName environment
  REM       variable was set above and that value is needed by some of the
  REM       commands contained in the inner loop.  If these commands were
  REM       directly contained in the outer loop, the PlatformName environment
  REM       variable would be stuck with its initial empty value instead.
  REM
  FOR /F "tokens=2* delims==" %%D IN ('SET PLATFORMNAME') DO (
................................................................................
    CALL :fn_UnsetVariable WindowsSdkDir_old

    REM
    REM NOTE: Reset the PATH here to the absolute bare minimum required.
    REM
    SET PATH=%TOOLPATH%;%SystemRoot%\System32;%SystemRoot%





    FOR %%B IN (%CONFIGURATIONS%) DO (
      REM
      REM NOTE: When preparing the debug build, set the DEBUG and MEMDEBUG
      REM       environment variables to be picked up by the MSVC makefile
      REM       itself.
      REM
      IF /I "%%B" == "Debug" (
................................................................................
      REM       3. Build the "sqlite3.dll" and "sqlite3.lib" binaries for this
      REM          platform.
      REM
      REM       4. Copy the "sqlite3.dll" and "sqlite3.lib" binaries for this
      REM          platform to the platform-specific directory beneath the
      REM          binary directory.
      REM




      "%ComSpec%" /C (
        REM
        REM NOTE: Attempt to setup the MSVC environment for this platform.
        REM
        %__ECHO3% CALL "%VCVARSALL%" %%P

        IF ERRORLEVEL 1 (
................................................................................
              ECHO Cannot build, Windows SDK not found for platform %%P.
              GOTO errors
            )
          )
        )

        REM
        REM NOTE: When using MSVC 2012, the native SDK path cannot simply use
        REM       the "lib" sub-directory beneath the location specified in the
        REM       WindowsSdkDir environment variable because that location does
        REM       not actually contain the necessary library files for x86.
        REM       This must be done for each iteration because it relies upon
        REM       the WindowsSdkDir environment variable being set by the batch
        REM       file used to setup the MSVC environment.
        REM
        IF DEFINED SET_NSDKLIBPATH (




          IF DEFINED WindowsPhoneKitDir (
            CALL :fn_CopyVariable WindowsPhoneKitDir NSDKLIBPATH
            CALL :fn_AppendVariable NSDKLIBPATH \lib\x86
          ) ELSE IF DEFINED WindowsSdkDir (
            CALL :fn_CopyVariable WindowsSdkDir NSDKLIBPATH






            IF "%VisualStudioVersion%" == "12.0" (
              CALL :fn_AppendVariable NSDKLIBPATH \lib\winv6.3\um\x86
            ) ELSE (
              CALL :fn_AppendVariable NSDKLIBPATH \lib\win8\um\x86
            )
          )
        )

  REM NOTE: Using the MSVC platform name, lookup the simpler platform name to
  REM       be used for the name of the platform-specific binary directory via
  REM       the environment variables setup earlier.
  REM
  CALL :fn_CopyVariable %%P_NAME PLATFORMNAME

  REM
  REM NOTE: This is the second loop.  There should be exactly one iteration.
  REM       This loop is necessary because the PlatformName environment
  REM       variable was set above and that value is needed by some of the
  REM       commands contained in the inner loop.  If these commands were
  REM       directly contained in the outer loop, the PlatformName environment
  REM       variable would be stuck with its initial empty value instead.
  REM
  FOR /F "tokens=2* delims==" %%D IN ('SET PLATFORMNAME') DO (
................................................................................
    CALL :fn_UnsetVariable WindowsSdkDir_old

    REM
    REM NOTE: Reset the PATH here to the absolute bare minimum required.
    REM
    SET PATH=%TOOLPATH%;%SystemRoot%\System32;%SystemRoot%

    REM
    REM NOTE: This is the inner loop.  There are normally two iterations, one
    REM       for each supported build configuration, e.g. Debug or Retail.
    REM
    FOR %%B IN (%CONFIGURATIONS%) DO (
      REM
      REM NOTE: When preparing the debug build, set the DEBUG and MEMDEBUG
      REM       environment variables to be picked up by the MSVC makefile
      REM       itself.
      REM
      IF /I "%%B" == "Debug" (
................................................................................
      REM       3. Build the "sqlite3.dll" and "sqlite3.lib" binaries for this
      REM          platform.
      REM
      REM       4. Copy the "sqlite3.dll" and "sqlite3.lib" binaries for this
      REM          platform to the platform-specific directory beneath the
      REM          binary directory.
      REM
      REM       5. Unless prevented from doing so, copy the "sqlite3.pdb"
      REM          symbols file for this platform to the platform-specific
      REM          directory beneath the binary directory.
      REM
      "%ComSpec%" /C (
        REM
        REM NOTE: Attempt to setup the MSVC environment for this platform.
        REM
        %__ECHO3% CALL "%VCVARSALL%" %%P

        IF ERRORLEVEL 1 (
................................................................................
              ECHO Cannot build, Windows SDK not found for platform %%P.
              GOTO errors
            )
          )
        )

        REM
        REM NOTE: When using MSVC 2012 and/or 2013, the native SDK path cannot
        REM       simply use the "lib" sub-directory beneath the location
        REM       specified in the WindowsSdkDir environment variable because
        REM       that location does not actually contain the necessary library
        REM       files for x86.  This must be done for each iteration because
        REM       it relies upon the WindowsSdkDir environment variable being
        REM       set by the batch file used to setup the MSVC environment.
        REM
        IF DEFINED SET_NSDKLIBPATH (
          REM
          REM NOTE: The Windows Phone SDK has a slightly different directory
          REM       structure and must be handled specially here.
          REM
          IF DEFINED WindowsPhoneKitDir (
            CALL :fn_CopyVariable WindowsPhoneKitDir NSDKLIBPATH
            CALL :fn_AppendVariable NSDKLIBPATH \lib\x86
          ) ELSE IF DEFINED WindowsSdkDir (
            CALL :fn_CopyVariable WindowsSdkDir NSDKLIBPATH

            REM
            REM NOTE: The Windows 8.1 SDK has a slightly different directory
            REM       naming convention.  Currently, this tool assumes that
            REM       the Windows 8.1 SDK should only be used with MSVC 2013.
            REM
            IF "%VisualStudioVersion%" == "12.0" (
              CALL :fn_AppendVariable NSDKLIBPATH \lib\winv6.3\um\x86
            ) ELSE (
              CALL :fn_AppendVariable NSDKLIBPATH \lib\win8\um\x86
            )
          )
        )