/*
** 2001 September 16
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
**
** May you do good and not evil.
** May you find forgiveness for yourself and forgive others.
** May you share freely, never taking more than you give.
**
******************************************************************************
**
** This file contains code that is specific to particular operating
** systems. The purpose of this file is to provide a uniform abstraction
** on which the rest of SQLite can operate.
*/
#include "os.h" /* Must be first to enable large file support */
#include "sqliteInt.h"
#if OS_UNIX
# include <time.h>
# include <errno.h>
# include <unistd.h>
# ifndef O_LARGEFILE
# define O_LARGEFILE 0
# endif
# ifdef SQLITE_DISABLE_LFS
# undef O_LARGEFILE
# define O_LARGEFILE 0
# endif
# ifndef O_NOFOLLOW
# define O_NOFOLLOW 0
# endif
# ifndef O_BINARY
# define O_BINARY 0
# endif
#endif
#if OS_WIN
# include <winbase.h>
#endif
#if OS_MAC
# include <extras.h>
# include <path2fss.h>
# include <TextUtils.h>
# include <FinderRegistry.h>
# include <Folders.h>
# include <Timer.h>
# include <OSUtils.h>
#endif
/*
** The DJGPP compiler environment looks mostly like Unix, but it
** lacks the fcntl() system call. So redefine fcntl() to be something
** that always succeeds. This means that locking does not occur under
** DJGPP. But its DOS - what did you expect?
*/
#ifdef __DJGPP__
# define fcntl(A,B,C) 0
#endif
/*
** Macros for performance tracing. Normally turned off
*/
#if 0
static int last_page = 0;
__inline__ unsigned long long int hwtime(void){
unsigned long long int x;
__asm__("rdtsc\n\t"
"mov %%edx, %%ecx\n\t"
:"=A" (x));
return x;
}
static unsigned long long int g_start;
static unsigned int elapse;
#define TIMER_START g_start=hwtime()
#define TIMER_END elapse=hwtime()-g_start
#define SEEK(X) last_page=(X)
#define TRACE1(X) fprintf(stderr,X)
#define TRACE2(X,Y) fprintf(stderr,X,Y)
#define TRACE3(X,Y,Z) fprintf(stderr,X,Y,Z)
#define TRACE4(X,Y,Z,A) fprintf(stderr,X,Y,Z,A)
#define TRACE5(X,Y,Z,A,B) fprintf(stderr,X,Y,Z,A,B)
#else
#define TIMER_START
#define TIMER_END
#define SEEK(X)
#define TRACE1(X)
#define TRACE2(X,Y)
#define TRACE3(X,Y,Z)
#define TRACE4(X,Y,Z,A)
#define TRACE5(X,Y,Z,A,B)
#endif
#if OS_UNIX
/*
** Here is the dirt on POSIX advisory locks: ANSI STD 1003.1 (1996)
** section 6.5.2.2 lines 483 through 490 specify that when a process
** sets or clears a lock, that operation overrides any prior locks set
** by the same process. It does not explicitly say so, but this implies
** that it overrides locks set by the same process using a different
** file descriptor. Consider this test case:
**
** int fd1 = open("./file1", O_RDWR|O_CREAT, 0644);
** int fd2 = open("./file2", O_RDWR|O_CREAT, 0644);
**
** Suppose ./file1 and ./file2 are really the same file (because
** one is a hard or symbolic link to the other) then if you set
** an exclusive lock on fd1, then try to get an exclusive lock
** on fd2, it works. I would have expected the second lock to
** fail since there was already a lock on the file due to fd1.
** But not so. Since both locks came from the same process, the
** second overrides the first, even though they were on different
** file descriptors opened on different file names.
**
** Bummer. If you ask me, this is broken. Badly broken. It means
** that we cannot use POSIX locks to synchronize file access among
** competing threads of the same process. POSIX locks will work fine
** to synchronize access for threads in separate processes, but not
** threads within the same process.
**
** To work around the problem, SQLite has to manage file locks internally
** on its own. Whenever a new database is opened, we have to find the
** specific inode of the database file (the inode is determined by the
** st_dev and st_ino fields of the stat structure that fstat() fills in)
** and check for locks already existing on that inode. When locks are
** created or removed, we have to look at our own internal record of the
** locks to see if another thread has previously set a lock on that same
** inode.
**
** The OsFile structure for POSIX is no longer just an integer file
** descriptor. It is now a structure that holds the integer file
** descriptor and a pointer to a structure that describes the internal
** locks on the corresponding inode. There is one locking structure
** per inode, so if the same inode is opened twice, both OsFile structures
** point to the same locking structure. The locking structure keeps
** a reference count (so we will know when to delete it) and a "cnt"
** field that tells us its internal lock status. cnt==0 means the
** file is unlocked. cnt==-1 means the file has an exclusive lock.
** cnt>0 means there are cnt shared locks on the file.
**
** Any attempt to lock or unlock a file first checks the locking
** structure. The fcntl() system call is only invoked to set a
** POSIX lock if the internal lock structure transitions between
** a locked and an unlocked state.
*/
/*
** An instance of the following structure serves as the key used
** to locate a particular lockInfo structure given its inode.
*/
struct inodeKey {
dev_t dev; /* Device number */
ino_t ino; /* Inode number */
};
/*
** An instance of the following structure is allocated for each inode.
** A single inode can have multiple file descriptors, so each OsFile
** structure contains a pointer to an instance of this object and this
** object keeps a count of the number of OsFiles pointing to it.
*/
struct lockInfo {
struct inodeKey key; /* The lookup key */
int cnt; /* 0: unlocked. -1: write lock. 1...: read lock. */
int nRef; /* Number of pointers to this structure */
};
/*
** This hash table maps inodes (in the form of inodeKey structures) into
** pointers to lockInfo structures.
*/
static Hash lockHash = { SQLITE_HASH_BINARY, 0, 0, 0, 0, 0 };
/*
** Given a file descriptor, locate a lockInfo structure that describes
** that file descriptor. Create a new one if necessary. NULL might
** be returned if malloc() fails.
*/
static struct lockInfo *findLockInfo(int fd){
int rc;
struct inodeKey key;
struct stat statbuf;
struct lockInfo *pInfo;
rc = fstat(fd, &statbuf);
if( rc!=0 ) return 0;
memset(&key, 0, sizeof(key));
key.dev = statbuf.st_dev;
key.ino = statbuf.st_ino;
pInfo = (struct lockInfo*)sqliteHashFind(&lockHash, &key, sizeof(key));
if( pInfo==0 ){
struct lockInfo *pOld;
pInfo = sqliteMalloc( sizeof(*pInfo) );
if( pInfo==0 ) return 0;
pInfo->key = key;
pInfo->nRef = 1;
pInfo->cnt = 0;
pOld = sqliteHashInsert(&lockHash, &pInfo->key, sizeof(key), pInfo);
if( pOld!=0 ){
assert( pOld==pInfo );
sqliteFree(pInfo);
pInfo = 0;
}
}else{
pInfo->nRef++;
}
return pInfo;
}
/*
** Release a lockInfo structure previously allocated by findLockInfo().
*/
static void releaseLockInfo(struct lockInfo *pInfo){
pInfo->nRef--;
if( pInfo->nRef==0 ){
sqliteHashInsert(&lockHash, &pInfo->key, sizeof(pInfo->key), 0);
sqliteFree(pInfo);
}
}
#endif /** POSIX advisory lock work-around **/
/*
** If we compile with the SQLITE_TEST macro set, then the following block
** of code will give us the ability to simulate a disk I/O error. This
** is used for testing the I/O recovery logic.
*/
#ifdef SQLITE_TEST
int sqlite_io_error_pending = 0;
#define SimulateIOError(A) \
if( sqlite_io_error_pending ) \
if( sqlite_io_error_pending-- == 1 ){ local_ioerr(); return A; }
static void local_ioerr(){
sqlite_io_error_pending = 0; /* Really just a place to set a breakpoint */
}
#else
#define SimulateIOError(A)
#endif
/*
** When testing, keep a count of the number of open files.
*/
#ifdef SQLITE_TEST
int sqlite_open_file_count = 0;
#define OpenCounter(X) sqlite_open_file_count+=(X)
#else
#define OpenCounter(X)
#endif
/*
** Delete the named file
*/
int sqliteOsDelete(const char *zFilename){
#if OS_UNIX
unlink(zFilename);
#endif
#if OS_WIN
DeleteFile(zFilename);
#endif
#if OS_MAC
unlink(zFilename);
#endif
return SQLITE_OK;
}
/*
** Return TRUE if the named file exists.
*/
int sqliteOsFileExists(const char *zFilename){
#if OS_UNIX
return access(zFilename, 0)==0;
#endif
#if OS_WIN
return GetFileAttributes(zFilename) != 0xffffffff;
#endif
#if OS_MAC
return access(zFilename, 0)==0;
#endif
}
#if 0 /* NOT USED */
/*
** Change the name of an existing file.
*/
int sqliteOsFileRename(const char *zOldName, const char *zNewName){
#if OS_UNIX
if( link(zOldName, zNewName) ){
return SQLITE_ERROR;
}
unlink(zOldName);
return SQLITE_OK;
#endif
#if OS_WIN
if( !MoveFile(zOldName, zNewName) ){
return SQLITE_ERROR;
}
return SQLITE_OK;
#endif
#if OS_MAC
/**** FIX ME ***/
return SQLITE_ERROR;
#endif
}
#endif /* NOT USED */
/*
** Attempt to open a file for both reading and writing. If that
** fails, try opening it read-only. If the file does not exist,
** try to create it.
**
** On success, a handle for the open file is written to *id
** and *pReadonly is set to 0 if the file was opened for reading and
** writing or 1 if the file was opened read-only. The function returns
** SQLITE_OK.
**
** On failure, the function returns SQLITE_CANTOPEN and leaves
** *id and *pReadonly unchanged.
*/
int sqliteOsOpenReadWrite(
const char *zFilename,
OsFile *id,
int *pReadonly
){
#if OS_UNIX
id->dirfd = -1;
id->fd = open(zFilename, O_RDWR|O_CREAT|O_LARGEFILE|O_BINARY, 0644);
if( id->fd<0 ){
id->fd = open(zFilename, O_RDONLY|O_LARGEFILE|O_BINARY);
if( id->fd<0 ){
return SQLITE_CANTOPEN;
}
*pReadonly = 1;
}else{
*pReadonly = 0;
}
sqliteOsEnterMutex();
id->pLock = findLockInfo(id->fd);
sqliteOsLeaveMutex();
if( id->pLock==0 ){
close(id->fd);
return SQLITE_NOMEM;
}
id->locked = 0;
TRACE3("OPEN %-3d %s\n", id->fd, zFilename);
OpenCounter(+1);
return SQLITE_OK;
#endif
#if OS_WIN
HANDLE h = CreateFile(zFilename,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_ALWAYS,
FILE_ATTRIBUTE_NORMAL | FILE_FLAG_RANDOM_ACCESS,
NULL
);
if( h==INVALID_HANDLE_VALUE ){
h = CreateFile(zFilename,
GENERIC_READ,
FILE_SHARE_READ,
NULL,
OPEN_ALWAYS,
FILE_ATTRIBUTE_NORMAL | FILE_FLAG_RANDOM_ACCESS,
NULL
);
if( h==INVALID_HANDLE_VALUE ){
return SQLITE_CANTOPEN;
}
*pReadonly = 1;
}else{
*pReadonly = 0;
}
id->h = h;
id->locked = 0;
OpenCounter(+1);
return SQLITE_OK;
#endif
#if OS_MAC
FSSpec fsSpec;
# ifdef _LARGE_FILE
HFSUniStr255 dfName;
FSRef fsRef;
if( __path2fss(zFilename, &fsSpec) != noErr ){
if( HCreate(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, 'SQLI', cDocumentFile) != noErr )
return SQLITE_CANTOPEN;
}
if( FSpMakeFSRef(&fsSpec, &fsRef) != noErr )
return SQLITE_CANTOPEN;
FSGetDataForkName(&dfName);
if( FSOpenFork(&fsRef, dfName.length, dfName.unicode,
fsRdWrShPerm, &(id->refNum)) != noErr ){
if( FSOpenFork(&fsRef, dfName.length, dfName.unicode,
fsRdWrPerm, &(id->refNum)) != noErr ){
if (FSOpenFork(&fsRef, dfName.length, dfName.unicode,
fsRdPerm, &(id->refNum)) != noErr )
return SQLITE_CANTOPEN;
else
*pReadonly = 1;
} else
*pReadonly = 0;
} else
*pReadonly = 0;
# else
__path2fss(zFilename, &fsSpec);
if( !sqliteOsFileExists(zFilename) ){
if( HCreate(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, 'SQLI', cDocumentFile) != noErr )
return SQLITE_CANTOPEN;
}
if( HOpenDF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdWrShPerm, &(id->refNum)) != noErr ){
if( HOpenDF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdWrPerm, &(id->refNum)) != noErr ){
if( HOpenDF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdPerm, &(id->refNum)) != noErr )
return SQLITE_CANTOPEN;
else
*pReadonly = 1;
} else
*pReadonly = 0;
} else
*pReadonly = 0;
# endif
if( HOpenRF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdWrShPerm, &(id->refNumRF)) != noErr){
id->refNumRF = -1;
}
id->locked = 0;
id->delOnClose = 0;
OpenCounter(+1);
return SQLITE_OK;
#endif
}
/*
** Attempt to open a new file for exclusive access by this process.
** The file will be opened for both reading and writing. To avoid
** a potential security problem, we do not allow the file to have
** previously existed. Nor do we allow the file to be a symbolic
** link.
**
** If delFlag is true, then make arrangements to automatically delete
** the file when it is closed.
**
** On success, write the file handle into *id and return SQLITE_OK.
**
** On failure, return SQLITE_CANTOPEN.
*/
int sqliteOsOpenExclusive(const char *zFilename, OsFile *id, int delFlag){
#if OS_UNIX
if( access(zFilename, 0)==0 ){
return SQLITE_CANTOPEN;
}
id->dirfd = -1;
id->fd = open(zFilename,
O_RDWR|O_CREAT|O_EXCL|O_NOFOLLOW|O_LARGEFILE|O_BINARY, 0600);
if( id->fd<0 ){
return SQLITE_CANTOPEN;
}
sqliteOsEnterMutex();
id->pLock = findLockInfo(id->fd);
sqliteOsLeaveMutex();
if( id->pLock==0 ){
close(id->fd);
unlink(zFilename);
return SQLITE_NOMEM;
}
id->locked = 0;
if( delFlag ){
unlink(zFilename);
}
TRACE3("OPEN-EX %-3d %s\n", id->fd, zFilename);
OpenCounter(+1);
return SQLITE_OK;
#endif
#if OS_WIN
HANDLE h;
int fileflags;
if( delFlag ){
fileflags = FILE_ATTRIBUTE_TEMPORARY | FILE_FLAG_RANDOM_ACCESS
| FILE_FLAG_DELETE_ON_CLOSE;
}else{
fileflags = FILE_FLAG_RANDOM_ACCESS;
}
h = CreateFile(zFilename,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
CREATE_ALWAYS,
fileflags,
NULL
);
if( h==INVALID_HANDLE_VALUE ){
return SQLITE_CANTOPEN;
}
id->h = h;
id->locked = 0;
OpenCounter(+1);
return SQLITE_OK;
#endif
#if OS_MAC
FSSpec fsSpec;
# ifdef _LARGE_FILE
HFSUniStr255 dfName;
FSRef fsRef;
__path2fss(zFilename, &fsSpec);
if( HCreate(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, 'SQLI', cDocumentFile) != noErr )
return SQLITE_CANTOPEN;
if( FSpMakeFSRef(&fsSpec, &fsRef) != noErr )
return SQLITE_CANTOPEN;
FSGetDataForkName(&dfName);
if( FSOpenFork(&fsRef, dfName.length, dfName.unicode,
fsRdWrPerm, &(id->refNum)) != noErr )
return SQLITE_CANTOPEN;
# else
__path2fss(zFilename, &fsSpec);
if( HCreate(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, 'SQLI', cDocumentFile) != noErr )
return SQLITE_CANTOPEN;
if( HOpenDF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdWrPerm, &(id->refNum)) != noErr )
return SQLITE_CANTOPEN;
# endif
id->refNumRF = -1;
id->locked = 0;
id->delOnClose = delFlag;
if (delFlag)
id->pathToDel = sqliteOsFullPathname(zFilename);
OpenCounter(+1);
return SQLITE_OK;
#endif
}
/*
** Attempt to open a new file for read-only access.
**
** On success, write the file handle into *id and return SQLITE_OK.
**
** On failure, return SQLITE_CANTOPEN.
*/
int sqliteOsOpenReadOnly(const char *zFilename, OsFile *id){
#if OS_UNIX
id->dirfd = -1;
id->fd = open(zFilename, O_RDONLY|O_LARGEFILE|O_BINARY);
if( id->fd<0 ){
return SQLITE_CANTOPEN;
}
sqliteOsEnterMutex();
id->pLock = findLockInfo(id->fd);
sqliteOsLeaveMutex();
if( id->pLock==0 ){
close(id->fd);
return SQLITE_NOMEM;
}
id->locked = 0;
TRACE3("OPEN-RO %-3d %s\n", id->fd, zFilename);
OpenCounter(+1);
return SQLITE_OK;
#endif
#if OS_WIN
HANDLE h = CreateFile(zFilename,
GENERIC_READ,
0,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL | FILE_FLAG_RANDOM_ACCESS,
NULL
);
if( h==INVALID_HANDLE_VALUE ){
return SQLITE_CANTOPEN;
}
id->h = h;
id->locked = 0;
OpenCounter(+1);
return SQLITE_OK;
#endif
#if OS_MAC
FSSpec fsSpec;
# ifdef _LARGE_FILE
HFSUniStr255 dfName;
FSRef fsRef;
if( __path2fss(zFilename, &fsSpec) != noErr )
return SQLITE_CANTOPEN;
if( FSpMakeFSRef(&fsSpec, &fsRef) != noErr )
return SQLITE_CANTOPEN;
FSGetDataForkName(&dfName);
if( FSOpenFork(&fsRef, dfName.length, dfName.unicode,
fsRdPerm, &(id->refNum)) != noErr )
return SQLITE_CANTOPEN;
# else
__path2fss(zFilename, &fsSpec);
if( HOpenDF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdPerm, &(id->refNum)) != noErr )
return SQLITE_CANTOPEN;
# endif
if( HOpenRF(fsSpec.vRefNum, fsSpec.parID, fsSpec.name, fsRdWrShPerm, &(id->refNumRF)) != noErr){
id->refNumRF = -1;
}
id->locked = 0;
id->delOnClose = 0;
OpenCounter(+1);
return SQLITE_OK;
#endif
}
/*
** Attempt to open a file descriptor for the directory that contains a
** file. This file descriptor can be used to fsync() the directory
** in order to make sure the creation of a new file is actually written
** to disk.
**
** This routine is only meaningful for Unix. It is a no-op under
** windows since windows does not support hard links.
**
** On success, a handle for a previously open file is at *id is
** updated with the new directory file descriptor and SQLITE_OK is
** returned.
**
** On failure, the function returns SQLITE_CANTOPEN and leaves
** *id unchanged.
*/
int sqliteOsOpenDirectory(
const char *zDirname,
OsFile *id
){
#if OS_UNIX
if( id->fd<0 ){
/* Do not open the directory if the corresponding file is not already
** open. */
return SQLITE_CANTOPEN;
}
assert( id->dirfd<0 );
id->dirfd = open(zDirname, O_RDONLY|O_BINARY, 0644);
if( id->dirfd<0 ){
return SQLITE_CANTOPEN;
}
TRACE3("OPENDIR %-3d %s\n", id->dirfd, zDirname);
#endif
return SQLITE_OK;
}
/*
** Create a temporary file name in zBuf. zBuf must be big enough to
** hold at least SQLITE_TEMPNAME_SIZE characters.
*/
int sqliteOsTempFileName(char *zBuf){
#if OS_UNIX
static const char *azDirs[] = {
"/var/tmp",
"/usr/tmp",
"/tmp",
".",
};
static char zChars[] =
"abcdefghijklmnopqrstuvwxyz"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"0123456789";
int i, j;
struct stat buf;
const char *zDir = ".";
for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); i++){
if( stat(azDirs[i], &buf) ) continue;
if( !S_ISDIR(buf.st_mode) ) continue;
if( access(azDirs[i], 07) ) continue;
zDir = azDirs[i];
break;
}
do{
sprintf(zBuf, "%s/"TEMP_FILE_PREFIX, zDir);
j = strlen(zBuf);
for(i=0; i<15; i++){
int n = sqliteRandomByte() % (sizeof(zChars)-1);
zBuf[j++] = zChars[n];
}
zBuf[j] = 0;
}while( access(zBuf,0)==0 );
#endif
#if OS_WIN
static char zChars[] =
"abcdefghijklmnopqrstuvwxyz"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"0123456789";
int i, j;
char zTempPath[SQLITE_TEMPNAME_SIZE];
GetTempPath(SQLITE_TEMPNAME_SIZE-30, zTempPath);
for(i=strlen(zTempPath); i>0 && zTempPath[i-1]=='\\'; i--){}
zTempPath[i] = 0;
for(;;){
sprintf(zBuf, "%s\\"TEMP_FILE_PREFIX, zTempPath);
j = strlen(zBuf);
for(i=0; i<15; i++){
int n = sqliteRandomByte() % (sizeof(zChars) - 1);
zBuf[j++] = zChars[n];
}
zBuf[j] = 0;
if( !sqliteOsFileExists(zBuf) ) break;
}
#endif
#if OS_MAC
static char zChars[] =
"abcdefghijklmnopqrstuvwxyz"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"0123456789";
int i, j;
char zTempPath[SQLITE_TEMPNAME_SIZE];
char zdirName[32];
CInfoPBRec infoRec;
Str31 dirName;
memset(&infoRec, 0, sizeof(infoRec));
memset(zTempPath, 0, SQLITE_TEMPNAME_SIZE);
if( FindFolder(kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
&(infoRec.dirInfo.ioVRefNum), &(infoRec.dirInfo.ioDrParID)) == noErr ){
infoRec.dirInfo.ioNamePtr = dirName;
do{
infoRec.dirInfo.ioFDirIndex = -1;
infoRec.dirInfo.ioDrDirID = infoRec.dirInfo.ioDrParID;
if( PBGetCatInfoSync(&infoRec) == noErr ){
CopyPascalStringToC(dirName, zdirName);
i = strlen(zdirName);
memmove(&(zTempPath[i+1]), zTempPath, strlen(zTempPath));
strcpy(zTempPath, zdirName);
zTempPath[i] = ':';
}else{
*zTempPath = 0;
break;
}
} while( infoRec.dirInfo.ioDrDirID != fsRtDirID );
}
if( *zTempPath == 0 )
getcwd(zTempPath, SQLITE_TEMPNAME_SIZE-24);
for(;;){
sprintf(zBuf, "%s"TEMP_FILE_PREFIX, zTempPath);
j = strlen(zBuf);
for(i=0; i<15; i++){
int n = sqliteRandomByte() % sizeof(zChars);
zBuf[j++] = zChars[n];
}
zBuf[j] = 0;
if( !sqliteOsFileExists(zBuf) ) break;
}
#endif
return SQLITE_OK;
}
/*
** Close a file
*/
int sqliteOsClose(OsFile *id){
#if OS_UNIX
close(id->fd);
if( id->dirfd>=0 ) close(id->dirfd);
id->dirfd = -1;
sqliteOsEnterMutex();
releaseLockInfo(id->pLock);
sqliteOsLeaveMutex();
TRACE2("CLOSE %-3d\n", id->fd);
OpenCounter(-1);
return SQLITE_OK;
#endif
#if OS_WIN
CloseHandle(id->h);
OpenCounter(-1);
return SQLITE_OK;
#endif
#if OS_MAC
if( id->refNumRF!=-1 )
FSClose(id->refNumRF);
# ifdef _LARGE_FILE
FSCloseFork(id->refNum);
# else
FSClose(id->refNum);
# endif
if( id->delOnClose ){
unlink(id->pathToDel);
sqliteFree(id->pathToDel);
}
OpenCounter(-1);
return SQLITE_OK;
#endif
}
/*
** Read data from a file into a buffer. Return SQLITE_OK if all
** bytes were read successfully and SQLITE_IOERR if anything goes
** wrong.
*/
int sqliteOsRead(OsFile *id, void *pBuf, int amt){
#if OS_UNIX
int got;
SimulateIOError(SQLITE_IOERR);
TIMER_START;
got = read(id->fd, pBuf, amt);
TIMER_END;
TRACE4("READ %-3d %7d %d\n", id->fd, last_page, elapse);
SEEK(0);
/* if( got<0 ) got = 0; */
if( got==amt ){
return SQLITE_OK;
}else{
return SQLITE_IOERR;
}
#endif
#if OS_WIN
DWORD got;
SimulateIOError(SQLITE_IOERR);
TRACE2("READ %d\n", last_page);
if( !ReadFile(id->h, pBuf, amt, &got, 0) ){
got = 0;
}
if( got==(DWORD)amt ){
return SQLITE_OK;
}else{
return SQLITE_IOERR;
}
#endif
#if OS_MAC
int got;
SimulateIOError(SQLITE_IOERR);
TRACE2("READ %d\n", last_page);
# ifdef _LARGE_FILE
FSReadFork(id->refNum, fsAtMark, 0, (ByteCount)amt, pBuf, (ByteCount*)&got);
# else
got = amt;
FSRead(id->refNum, &got, pBuf);
# endif
if( got==amt ){
return SQLITE_OK;
}else{
return SQLITE_IOERR;
}
#endif
}
/*
** Write data from a buffer into a file. Return SQLITE_OK on success
** or some other error code on failure.
*/
int sqliteOsWrite(OsFile *id, const void *pBuf, int amt){
#if OS_UNIX
int wrote = 0;
SimulateIOError(SQLITE_IOERR);
TIMER_START;
while( amt>0 && (wrote = write(id->fd, pBuf, amt))>0 ){
amt -= wrote;
pBuf = &((char*)pBuf)[wrote];
}
TIMER_END;
TRACE4("WRITE %-3d %7d %d\n", id->fd, last_page, elapse);
SEEK(0);
if( amt>0 ){
return SQLITE_FULL;
}
return SQLITE_OK;
#endif
#if OS_WIN
int rc;
DWORD wrote;
SimulateIOError(SQLITE_IOERR);
TRACE2("WRITE %d\n", last_page);
while( amt>0 && (rc = WriteFile(id->h, pBuf, amt, &wrote, 0))!=0 && wrote>0 ){
amt -= wrote;
pBuf = &((char*)pBuf)[wrote];
}
if( !rc || amt>(int)wrote ){
return SQLITE_FULL;
}
return SQLITE_OK;
#endif
#if OS_MAC
OSErr oserr;
int wrote = 0;
SimulateIOError(SQLITE_IOERR);
TRACE2("WRITE %d\n", last_page);
while( amt>0 ){
# ifdef _LARGE_FILE
oserr = FSWriteFork(id->refNum, fsAtMark, 0,
(ByteCount)amt, pBuf, (ByteCount*)&wrote);
# else
wrote = amt;
oserr = FSWrite(id->refNum, &wrote, pBuf);
# endif
if( wrote == 0 || oserr != noErr)
break;
amt -= wrote;
pBuf = &((char*)pBuf)[wrote];
}
if( oserr != noErr || amt>wrote ){
return SQLITE_FULL;
}
return SQLITE_OK;
#endif
}
/*
** Move the read/write pointer in a file.
*/
int sqliteOsSeek(OsFile *id, off_t offset){
SEEK(offset/1024 + 1);
#if OS_UNIX
lseek(id->fd, offset, SEEK_SET);
return SQLITE_OK;
#endif
#if OS_WIN
{
LONG upperBits = offset>>32;
LONG lowerBits = offset & 0xffffffff;
DWORD rc;
rc = SetFilePointer(id->h, lowerBits, &upperBits, FILE_BEGIN);
/* TRACE3("SEEK rc=0x%x upper=0x%x\n", rc, upperBits); */
}
return SQLITE_OK;
#endif
#if OS_MAC
{
off_t curSize;
if( sqliteOsFileSize(id, &curSize) != SQLITE_OK ){
return SQLITE_IOERR;
}
if( offset >= curSize ){
if( sqliteOsTruncate(id, offset+1) != SQLITE_OK ){
return SQLITE_IOERR;
}
}
# ifdef _LARGE_FILE
if( FSSetForkPosition(id->refNum, fsFromStart, offset) != noErr ){
# else
if( SetFPos(id->refNum, fsFromStart, offset) != noErr ){
# endif
return SQLITE_IOERR;
}else{
return SQLITE_OK;
}
}
#endif
}
/*
** Make sure all writes to a particular file are committed to disk.
**
** Under Unix, also make sure that the directory entry for the file
** has been created by fsync-ing the directory that contains the file.
** If we do not do this and we encounter a power failure, the directory
** entry for the journal might not exist after we reboot. The next
** SQLite to access the file will not know that the journal exists (because
** the directory entry for the journal was never created) and the transaction
** will not roll back - possibly leading to database corruption.
*/
int sqliteOsSync(OsFile *id){
#if OS_UNIX
SimulateIOError(SQLITE_IOERR);
TRACE2("SYNC %-3d\n", id->fd);
if( fsync(id->fd) ){
return SQLITE_IOERR;
}else{
if( id->dirfd>=0 ){
TRACE2("DIRSYNC %-3d\n", id->dirfd);
fsync(id->dirfd);
close(id->dirfd); /* Only need to sync once, so close the directory */
id->dirfd = -1; /* when we are done. */
}
return SQLITE_OK;
}
#endif
#if OS_WIN
if( FlushFileBuffers(id->h) ){
return SQLITE_OK;
}else{
return SQLITE_IOERR;
}
#endif
#if OS_MAC
# ifdef _LARGE_FILE
if( FSFlushFork(id->refNum) != noErr ){
# else
ParamBlockRec params;
memset(¶ms, 0, sizeof(ParamBlockRec));
params.ioParam.ioRefNum = id->refNum;
if( PBFlushFileSync(¶ms) != noErr ){
# endif
return SQLITE_IOERR;
}else{
return SQLITE_OK;
}
#endif
}
/*
** Truncate an open file to a specified size
*/
int sqliteOsTruncate(OsFile *id, off_t nByte){
SimulateIOError(SQLITE_IOERR);
#if OS_UNIX
return ftruncate(id->fd, nByte)==0 ? SQLITE_OK : SQLITE_IOERR;
#endif
#if OS_WIN
{
LONG upperBits = nByte>>32;
SetFilePointer(id->h, nByte, &upperBits, FILE_BEGIN);
SetEndOfFile(id->h);
}
return SQLITE_OK;
#endif
#if OS_MAC
# ifdef _LARGE_FILE
if( FSSetForkSize(id->refNum, fsFromStart, nByte) != noErr){
# else
if( SetEOF(id->refNum, nByte) != noErr ){
# endif
return SQLITE_IOERR;
}else{
return SQLITE_OK;
}
#endif
}
/*
** Determine the current size of a file in bytes
*/
int sqliteOsFileSize(OsFile *id, off_t *pSize){
#if OS_UNIX
struct stat buf;
SimulateIOError(SQLITE_IOERR);
if( fstat(id->fd, &buf)!=0 ){
return SQLITE_IOERR;
}
*pSize = buf.st_size;
return SQLITE_OK;
#endif
#if OS_WIN
DWORD upperBits, lowerBits;
SimulateIOError(SQLITE_IOERR);
lowerBits = GetFileSize(id->h, &upperBits);
*pSize = (((off_t)upperBits)<<32) + lowerBits;
return SQLITE_OK;
#endif
#if OS_MAC
# ifdef _LARGE_FILE
if( FSGetForkSize(id->refNum, pSize) != noErr){
# else
if( GetEOF(id->refNum, pSize) != noErr ){
# endif
return SQLITE_IOERR;
}else{
return SQLITE_OK;
}
#endif
}
#if OS_WIN
/*
** Return true (non-zero) if we are running under WinNT, Win2K or WinXP.
** Return false (zero) for Win95, Win98, or WinME.
**
** Here is an interesting observation: Win95, Win98, and WinME lack
** the LockFileEx() API. But we can still statically link against that
** API as long as we don't call it win running Win95/98/ME. A call to
** this routine is used to determine if the host is Win95/98/ME or
** WinNT/2K/XP so that we will know whether or not we can safely call
** the LockFileEx() API.
*/
int isNT(void){
static osType = 0; /* 0=unknown 1=win95 2=winNT */
if( osType==0 ){
OSVERSIONINFO sInfo;
sInfo.dwOSVersionInfoSize = sizeof(sInfo);
GetVersionEx(&sInfo);
osType = sInfo.dwPlatformId==VER_PLATFORM_WIN32_NT ? 2 : 1;
}
return osType==2;
}
#endif
/*
** Windows file locking notes: [similar issues apply to MacOS]
**
** We cannot use LockFileEx() or UnlockFileEx() on Win95/98/ME because
** those functions are not available. So we use only LockFile() and
** UnlockFile().
**
** LockFile() prevents not just writing but also reading by other processes.
** (This is a design error on the part of Windows, but there is nothing
** we can do about that.) So the region used for locking is at the
** end of the file where it is unlikely to ever interfere with an
** actual read attempt.
**
** A database read lock is obtained by locking a single randomly-chosen
** byte out of a specific range of bytes. The lock byte is obtained at
** random so two separate readers can probably access the file at the
** same time, unless they are unlucky and choose the same lock byte.
** A database write lock is obtained by locking all bytes in the range.
** There can only be one writer.
**
** A lock is obtained on the first byte of the lock range before acquiring
** either a read lock or a write lock. This prevents two processes from
** attempting to get a lock at a same time. The semantics of
** sqliteOsReadLock() require that if there is already a write lock, that
** lock is converted into a read lock atomically. The lock on the first
** byte allows us to drop the old write lock and get the read lock without
** another process jumping into the middle and messing us up. The same
** argument applies to sqliteOsWriteLock().
**
** On WinNT/2K/XP systems, LockFileEx() and UnlockFileEx() are available,
** which means we can use reader/writer locks. When reader writer locks
** are used, the lock is placed on the same range of bytes that is used
** for probabilistic locking in Win95/98/ME. Hence, the locking scheme
** will support two or more Win95 readers or two or more WinNT readers.
** But a single Win95 reader will lock out all WinNT readers and a single
** WinNT reader will lock out all other Win95 readers.
**
** Note: On MacOS we use the resource fork for locking.
**
** The following #defines specify the range of bytes used for locking.
** N_LOCKBYTE is the number of bytes available for doing the locking.
** The first byte used to hold the lock while the lock is changing does
** not count toward this number. FIRST_LOCKBYTE is the address of
** the first byte in the range of bytes used for locking.
*/
#define N_LOCKBYTE 10239
#if OS_MAC
# define FIRST_LOCKBYTE (0x000fffff - N_LOCKBYTE)
#else
# define FIRST_LOCKBYTE (0xffffffff - N_LOCKBYTE)
#endif
/*
** Change the status of the lock on the file "id" to be a readlock.
** If the file was write locked, then this reduces the lock to a read.
** If the file was read locked, then this acquires a new read lock.
**
** Return SQLITE_OK on success and SQLITE_BUSY on failure. If this
** library was compiled with large file support (LFS) but LFS is not
** available on the host, then an SQLITE_NOLFS is returned.
*/
int sqliteOsReadLock(OsFile *id){
#if OS_UNIX
int rc;
sqliteOsEnterMutex();
if( id->pLock->cnt>0 ){
if( !id->locked ){
id->pLock->cnt++;
id->locked = 1;
}
rc = SQLITE_OK;
}else if( id->locked || id->pLock->cnt==0 ){
struct flock lock;
int s;
lock.l_type = F_RDLCK;
lock.l_whence = SEEK_SET;
lock.l_start = lock.l_len = 0L;
s = fcntl(id->fd, F_SETLK, &lock);
if( s!=0 ){
rc = (errno==EINVAL) ? SQLITE_NOLFS : SQLITE_BUSY;
}else{
rc = SQLITE_OK;
id->pLock->cnt = 1;
id->locked = 1;
}
}else{
rc = SQLITE_BUSY;
}
sqliteOsLeaveMutex();
return rc;
#endif
#if OS_WIN
int rc;
if( id->locked>0 ){
rc = SQLITE_OK;
}else{
int lk = (sqliteRandomInteger() & 0x7ffffff)%N_LOCKBYTE+1;
int res;
int cnt = 100;
while( cnt-->0 && (res = LockFile(id->h, FIRST_LOCKBYTE, 0, 1, 0))==0 ){
Sleep(1);
}
if( res ){
UnlockFile(id->h, FIRST_LOCKBYTE+1, 0, N_LOCKBYTE, 0);
if( isNT() ){
OVERLAPPED ovlp;
ovlp.Offset = FIRST_LOCKBYTE+1;
ovlp.OffsetHigh = 0;
ovlp.hEvent = 0;
res = LockFileEx(id->h, LOCKFILE_FAIL_IMMEDIATELY,
0, N_LOCKBYTE, 0, &ovlp);
}else{
res = LockFile(id->h, FIRST_LOCKBYTE+lk, 0, 1, 0);
}
UnlockFile(id->h, FIRST_LOCKBYTE, 0, 1, 0);
}
if( res ){
id->locked = lk;
rc = SQLITE_OK;
}else{
rc = SQLITE_BUSY;
}
}
return rc;
#endif
#if OS_MAC
int rc;
if( id->locked>0 || id->refNumRF == -1 ){
rc = SQLITE_OK;
}else{
int lk = (sqliteRandomInteger() & 0x7ffffff)%N_LOCKBYTE+1;
OSErr res;
int cnt = 5;
ParamBlockRec params;
memset(¶ms, 0, sizeof(params));
params.ioParam.ioRefNum = id->refNumRF;
params.ioParam.ioPosMode = fsFromStart;
params.ioParam.ioPosOffset = FIRST_LOCKBYTE;
params.ioParam.ioReqCount = 1;
while( cnt-->0 && (res = PBLockRangeSync(¶ms))!=noErr ){
UInt32 finalTicks;
Delay(1, &finalTicks); /* 1/60 sec */
}
if( res == noErr ){
params.ioParam.ioPosOffset = FIRST_LOCKBYTE+1;
params.ioParam.ioReqCount = N_LOCKBYTE;
PBUnlockRangeSync(¶ms);
params.ioParam.ioPosOffset = FIRST_LOCKBYTE+lk;
params.ioParam.ioReqCount = 1;
res = PBLockRangeSync(¶ms);
params.ioParam.ioPosOffset = FIRST_LOCKBYTE;
params.ioParam.ioReqCount = 1;
PBUnlockRangeSync(¶ms);
}
if( res == noErr ){
id->locked = lk;
rc = SQLITE_OK;
}else{
rc = SQLITE_BUSY;
}
}
return rc;
#endif
}
/*
** Change the lock status to be an exclusive or write lock. Return
** SQLITE_OK on success and SQLITE_BUSY on a failure. If this
** library was compiled with large file support (LFS) but LFS is not
** available on the host, then an SQLITE_NOLFS is returned.
*/
int sqliteOsWriteLock(OsFile *id){
#if OS_UNIX
int rc;
sqliteOsEnterMutex();
if( id->pLock->cnt==0 || (id->pLock->cnt==1 && id->locked==1) ){
struct flock lock;
int s;
lock.l_type = F_WRLCK;
lock.l_whence = SEEK_SET;
lock.l_start = lock.l_len = 0L;
s = fcntl(id->fd, F_SETLK, &lock);
if( s!=0 ){
rc = (errno==EINVAL) ? SQLITE_NOLFS : SQLITE_BUSY;
}else{
rc = SQLITE_OK;
id->pLock->cnt = -1;
id->locked = 1;
}
}else{
rc = SQLITE_BUSY;
}
sqliteOsLeaveMutex();
return rc;
#endif
#if OS_WIN
int rc;
if( id->locked<0 ){
rc = SQLITE_OK;
}else{
int res;
int cnt = 100;
while( cnt-->0 && (res = LockFile(id->h, FIRST_LOCKBYTE, 0, 1, 0))==0 ){
Sleep(1);
}
if( res ){
if( id->locked>0 ){
if( isNT() ){
UnlockFile(id->h, FIRST_LOCKBYTE+1, 0, N_LOCKBYTE, 0);
}else{
res = UnlockFile(id->h, FIRST_LOCKBYTE + id->locked, 0, 1, 0);
}
}
if( res ){
res = LockFile(id->h, FIRST_LOCKBYTE+1, 0, N_LOCKBYTE, 0);
}else{
res = 0;
}
UnlockFile(id->h, FIRST_LOCKBYTE, 0, 1, 0);
}
if( res ){
id->locked = -1;
rc = SQLITE_OK;
}else{
rc = SQLITE_BUSY;
}
}
return rc;
#endif
#if OS_MAC
int rc;
if( id->locked<0 || id->refNumRF == -1 ){
rc = SQLITE_OK;
}else{
OSErr res;
int cnt = 5;
ParamBlockRec params;
memset(¶ms, 0, sizeof(params));
params.ioParam.ioRefNum = id->refNumRF;
params.ioParam.ioPosMode = fsFromStart;
params.ioParam.ioPosOffset = FIRST_LOCKBYTE;
params.ioParam.ioReqCount = 1;
while( cnt-->0 && (res = PBLockRangeSync(¶ms))!=noErr ){
UInt32 finalTicks;
Delay(1, &finalTicks); /* 1/60 sec */
}
if( res == noErr ){
params.ioParam.ioPosOffset = FIRST_LOCKBYTE + id->locked;
params.ioParam.ioReqCount = 1;
if( id->locked==0
|| PBUnlockRangeSync(¶ms)==noErr ){
params.ioParam.ioPosOffset = FIRST_LOCKBYTE+1;
params.ioParam.ioReqCount = N_LOCKBYTE;
res = PBLockRangeSync(¶ms);
}else{
res = afpRangeNotLocked;
}
params.ioParam.ioPosOffset = FIRST_LOCKBYTE;
params.ioParam.ioReqCount = 1;
PBUnlockRangeSync(¶ms);
}
if( res == noErr ){
id->locked = -1;
rc = SQLITE_OK;
}else{
rc = SQLITE_BUSY;
}
}
return rc;
#endif
}
/*
** Unlock the given file descriptor. If the file descriptor was
** not previously locked, then this routine is a no-op. If this
** library was compiled with large file support (LFS) but LFS is not
** available on the host, then an SQLITE_NOLFS is returned.
*/
int sqliteOsUnlock(OsFile *id){
#if OS_UNIX
int rc;
if( !id->locked ) return SQLITE_OK;
sqliteOsEnterMutex();
assert( id->pLock->cnt!=0 );
if( id->pLock->cnt>1 ){
id->pLock->cnt--;
rc = SQLITE_OK;
}else{
struct flock lock;
int s;
lock.l_type = F_UNLCK;
lock.l_whence = SEEK_SET;
lock.l_start = lock.l_len = 0L;
s = fcntl(id->fd, F_SETLK, &lock);
if( s!=0 ){
rc = (errno==EINVAL) ? SQLITE_NOLFS : SQLITE_BUSY;
}else{
rc = SQLITE_OK;
id->pLock->cnt = 0;
}
}
sqliteOsLeaveMutex();
id->locked = 0;
return rc;
#endif
#if OS_WIN
int rc;
if( id->locked==0 ){
rc = SQLITE_OK;
}else if( isNT() || id->locked<0 ){
UnlockFile(id->h, FIRST_LOCKBYTE+1, 0, N_LOCKBYTE, 0);
rc = SQLITE_OK;
id->locked = 0;
}else{
UnlockFile(id->h, FIRST_LOCKBYTE+id->locked, 0, 1, 0);
rc = SQLITE_OK;
id->locked = 0;
}
return rc;
#endif
#if OS_MAC
int rc;
ParamBlockRec params;
memset(¶ms, 0, sizeof(params));
params.ioParam.ioRefNum = id->refNumRF;
params.ioParam.ioPosMode = fsFromStart;
if( id->locked==0 || id->refNumRF == -1 ){
rc = SQLITE_OK;
}else if( id->locked<0 ){
params.ioParam.ioPosOffset = FIRST_LOCKBYTE+1;
params.ioParam.ioReqCount = N_LOCKBYTE;
PBUnlockRangeSync(¶ms);
rc = SQLITE_OK;
id->locked = 0;
}else{
params.ioParam.ioPosOffset = FIRST_LOCKBYTE+id->locked;
params.ioParam.ioReqCount = 1;
PBUnlockRangeSync(¶ms);
rc = SQLITE_OK;
id->locked = 0;
}
return rc;
#endif
}
/*
** Get information to seed the random number generator. The seed
** is written into the buffer zBuf[256]. The calling function must
** supply a sufficiently large buffer.
*/
int sqliteOsRandomSeed(char *zBuf){
#ifdef SQLITE_TEST
/* When testing, always use the same random number sequence.
** This makes the tests repeatable.
*/
memset(zBuf, 0, 256);
#endif
#if OS_UNIX && !defined(SQLITE_TEST)
int pid;
time((time_t*)zBuf);
pid = getpid();
memcpy(&zBuf[sizeof(time_t)], &pid, sizeof(pid));
#endif
#if OS_WIN && !defined(SQLITE_TEST)
GetSystemTime((LPSYSTEMTIME)zBuf);
#endif
#if OS_MAC
int pid;
Microseconds((UnsignedWide*)zBuf);
pid = getpid();
memcpy(&zBuf[sizeof(UnsignedWide)], &pid, sizeof(pid));
#endif
return SQLITE_OK;
}
/*
** Sleep for a little while. Return the amount of time slept.
*/
int sqliteOsSleep(int ms){
#if OS_UNIX
#if defined(HAVE_USLEEP) && HAVE_USLEEP
usleep(ms*1000);
return ms;
#else
sleep((ms+999)/1000);
return 1000*((ms+999)/1000);
#endif
#endif
#if OS_WIN
Sleep(ms);
return ms;
#endif
#if OS_MAC
UInt32 finalTicks;
UInt32 ticks = (((UInt32)ms+16)*3)/50; /* 1/60 sec per tick */
Delay(ticks, &finalTicks);
return (int)((ticks*50)/3);
#endif
}
/*
** Macros used to determine whether or not to use threads. The
** SQLITE_UNIX_THREADS macro is defined if we are synchronizing for
** Posix threads and SQLITE_W32_THREADS is defined if we are
** synchronizing using Win32 threads.
*/
#if OS_UNIX && defined(THREADSAFE) && THREADSAFE
# include <pthread.h>
# define SQLITE_UNIX_THREADS 1
#endif
#if OS_WIN && defined(THREADSAFE) && THREADSAFE
# define SQLITE_W32_THREADS 1
#endif
#if OS_MAC && defined(THREADSAFE) && THREADSAFE
# include <Multiprocessing.h>
# define SQLITE_MACOS_MULTITASKING 1
#endif
/*
** Static variables used for thread synchronization
*/
static int inMutex = 0;
#ifdef SQLITE_UNIX_THREADS
static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
#endif
#ifdef SQLITE_W32_THREADS
static CRITICAL_SECTION cs;
#endif
#ifdef SQLITE_MACOS_MULTITASKING
static MPCriticalRegionID criticalRegion;
#endif
/*
** The following pair of routine implement mutual exclusion for
** multi-threaded processes. Only a single thread is allowed to
** executed code that is surrounded by EnterMutex() and LeaveMutex().
**
** SQLite uses only a single Mutex. There is not much critical
** code and what little there is executes quickly and without blocking.
*/
void sqliteOsEnterMutex(){
#ifdef SQLITE_UNIX_THREADS
pthread_mutex_lock(&mutex);
#endif
#ifdef SQLITE_W32_THREADS
static int isInit = 0;
while( !isInit ){
static long lock = 0;
if( InterlockedIncrement(&lock)==1 ){
InitializeCriticalSection(&cs);
isInit = 1;
}else{
Sleep(1);
}
}
EnterCriticalSection(&cs);
#endif
#ifdef SQLITE_MACOS_MULTITASKING
static volatile int notInit = 1;
if( notInit ){
if( notInit == 2 ) /* as close as you can get to thread safe init */
MPYield();
else{
notInit = 2;
MPCreateCriticalRegion(&criticalRegion);
notInit = 0;
}
}
MPEnterCriticalRegion(criticalRegion, kDurationForever);
#endif
assert( !inMutex );
inMutex = 1;
}
void sqliteOsLeaveMutex(){
assert( inMutex );
inMutex = 0;
#ifdef SQLITE_UNIX_THREADS
pthread_mutex_unlock(&mutex);
#endif
#ifdef SQLITE_W32_THREADS
LeaveCriticalSection(&cs);
#endif
#ifdef SQLITE_MACOS_MULTITASKING
MPExitCriticalRegion(criticalRegion);
#endif
}
/*
** Turn a relative pathname into a full pathname. Return a pointer
** to the full pathname stored in space obtained from sqliteMalloc().
** The calling function is responsible for freeing this space once it
** is no longer needed.
*/
char *sqliteOsFullPathname(const char *zRelative){
#if OS_UNIX
char *zFull = 0;
if( zRelative[0]=='/' ){
sqliteSetString(&zFull, zRelative, 0);
}else{
char zBuf[5000];
sqliteSetString(&zFull, getcwd(zBuf, sizeof(zBuf)), "/", zRelative, 0);
}
return zFull;
#endif
#if OS_WIN
char *zNotUsed;
char *zFull;
int nByte;
nByte = GetFullPathName(zRelative, 0, 0, &zNotUsed) + 1;
zFull = sqliteMalloc( nByte );
if( zFull==0 ) return 0;
GetFullPathName(zRelative, nByte, zFull, &zNotUsed);
return zFull;
#endif
#if OS_MAC
char *zFull = 0;
if( zRelative[0]==':' ){
char zBuf[_MAX_PATH+1];
sqliteSetString(&zFull, getcwd(zBuf, sizeof(zBuf)), &(zRelative[1]), 0);
}else{
if( strchr(zRelative, ':') ){
sqliteSetString(&zFull, zRelative, 0);
}else{
char zBuf[_MAX_PATH+1];
sqliteSetString(&zFull, getcwd(zBuf, sizeof(zBuf)), zRelative, 0);
}
}
return zFull;
#endif
}
/*
** Find the current time (in Universal Coordinated Time). Write the
** current time and date as a Julian Day number into *prNow and
** return 0. Return 1 if the time and date cannot be found.
*/
int sqliteOsCurrentTime(double *prNow){
#if OS_UNIX
time_t t;
time(&t);
*prNow = t/86400.0 + 2440587.5;
return 0;
#endif
return 1;
}