@ECHO OFF
::
:: build-all-msvc.bat --
::
:: Multi-Platform Build Tool for MSVC
::
SETLOCAL
REM SET __ECHO=ECHO
REM SET __ECHO2=ECHO
REM SET __ECHO3=ECHO
IF NOT DEFINED _AECHO (SET _AECHO=REM)
IF NOT DEFINED _CECHO (SET _CECHO=REM)
IF NOT DEFINED _VECHO (SET _VECHO=REM)
%_AECHO% Running %0 %*
REM SET DFLAGS=/L
%_VECHO% DFlags = '%DFLAGS%'
SET FFLAGS=/V /F /G /H /I /R /Y /Z
%_VECHO% FFlags = '%FFLAGS%'
SET ROOT=%~dp0\..
SET ROOT=%ROOT:\\=\%
%_VECHO% Root = '%ROOT%'
REM
REM NOTE: The first and only argument to this batch file should be the output
REM directory where the platform-specific binary directories should be
REM created.
REM
SET BINARYDIRECTORY=%1
IF NOT DEFINED BINARYDIRECTORY (
GOTO usage
)
%_VECHO% BinaryDirectory = '%BINARYDIRECTORY%'
SET DUMMY=%2
IF DEFINED DUMMY (
GOTO usage
)
REM
REM NOTE: From this point, we need a clean error level. Reset it now.
REM
CALL :fn_ResetErrorLevel
REM
REM NOTE: Change the current directory to the root of the source tree, saving
REM the current directory on the directory stack.
REM
%__ECHO2% PUSHD "%ROOT%"
IF ERRORLEVEL 1 (
ECHO Could not change directory to "%ROOT%".
GOTO errors
)
REM
REM NOTE: This batch file requires the ComSpec environment variable to be set,
REM typically to something like "C:\Windows\System32\cmd.exe".
REM
IF NOT DEFINED ComSpec (
ECHO The ComSpec environment variable must be defined.
GOTO errors
)
REM
REM NOTE: This batch file requires the VcInstallDir environment variable to be
REM set. Tyipcally, this means this batch file needs to be run from an
REM MSVC command prompt.
REM
IF NOT DEFINED VCINSTALLDIR (
ECHO The VCINSTALLDIR environment variable must be defined.
GOTO errors
)
REM
REM NOTE: If the list of platforms is not already set, use the default list.
REM
IF NOT DEFINED PLATFORMS (
SET PLATFORMS=x86 x86_amd64 x86_arm
)
%_VECHO% Platforms = '%PLATFORMS%'
REM
REM NOTE: Setup environment variables to translate between the MSVC platform
REM names and the names to be used for the platform-specific binary
REM directories.
REM
SET x86_NAME=x86
SET x86_amd64_NAME=x64
SET x86_arm_NAME=ARM
%_VECHO% x86_Name = '%x86_NAME%'
%_VECHO% x86_amd64_Name = '%x86_amd64_NAME%'
%_VECHO% x86_arm_Name = '%x86_arm_NAME%'
REM
REM NOTE: Check for the external tools needed during the build process ^(i.e.
REM those that do not get compiled as part of the build process itself^)
REM along the PATH.
REM
FOR %%T IN (gawk.exe tclsh85.exe) DO (
SET %%T_PATH=%%~dp$PATH:T
)
REM
REM NOTE: Set the TOOLPATH variable to contain all the directories where the
REM external tools were found in the search above.
REM
SET TOOLPATH=%gawk.exe_PATH%;%tclsh85.exe_PATH%
%_VECHO% ToolPath = '%TOOLPATH%'
REM
REM NOTE: Check for MSVC 2012 because the Windows SDK directory handling is
REM slightly different for that version.
REM
IF "%VisualStudioVersion%" == "11.0" (
SET SET_NSDKLIBPATH=1
) ELSE (
CALL :fn_UnsetVariable SET_NSDKLIBPATH
)
REM
REM NOTE: This is the outer loop. There should be exactly one iteration per
REM platform.
REM
FOR %%P IN (%PLATFORMS%) DO (
REM
REM NOTE: Using the MSVC platform name, lookup the simpler platform name to
REM be used for the name of the platform-specific binary directory via
REM the environment variables setup earlier.
REM
CALL :fn_CopyVariable %%P_NAME PLATFORMNAME
REM
REM NOTE: This is the inner loop. There should be exactly one iteration.
REM This loop is necessary because the PlatformName environment
REM variable was set above and that value is needed by some of the
REM commands contained in the inner loop. If these commands were
REM directly contained in the outer loop, the PlatformName environment
REM variable would be stuck with its initial empty value instead.
REM
FOR /F "tokens=2* delims==" %%D IN ('SET PLATFORMNAME') DO (
REM
REM NOTE: Attempt to clean the environment of all variables used by MSVC
REM and/or Visual Studio. This block may need to be updated in the
REM future to account for additional environment variables.
REM
CALL :fn_UnsetVariable DevEnvDir
CALL :fn_UnsetVariable ExtensionSdkDir
CALL :fn_UnsetVariable Framework35Version
CALL :fn_UnsetVariable FrameworkDir
CALL :fn_UnsetVariable FrameworkDir32
CALL :fn_UnsetVariable FrameworkVersion
CALL :fn_UnsetVariable FrameworkVersion32
CALL :fn_UnsetVariable FSHARPINSTALLDIR
CALL :fn_UnsetVariable INCLUDE
CALL :fn_UnsetVariable LIB
CALL :fn_UnsetVariable LIBPATH
CALL :fn_UnsetVariable Platform
REM CALL :fn_UnsetVariable VCINSTALLDIR
CALL :fn_UnsetVariable VSINSTALLDIR
CALL :fn_UnsetVariable WindowsSdkDir
CALL :fn_UnsetVariable WindowsSdkDir_35
CALL :fn_UnsetVariable WindowsSdkDir_old
REM
REM NOTE: Reset the PATH here to the absolute bare minimum required.
REM
SET PATH=%TOOLPATH%;%SystemRoot%\System32;%SystemRoot%
FOR %%B IN (Debug Retail) DO (
REM
REM NOTE: When preparing the debug build, set the DEBUG and MEMDEBUG
REM environment variables to be picked up by the MSVC makefile
REM itself.
REM
IF /I "%%B" == "Debug" (
SET DEBUG=2
SET MEMDEBUG=1
) ELSE (
CALL :fn_UnsetVariable DEBUG
CALL :fn_UnsetVariable MEMDEBUG
)
REM
REM NOTE: Launch a nested command shell to perform the following steps:
REM
REM 1. Setup the MSVC environment for this platform using the
REM official batch file.
REM
REM 2. Make sure that no stale build output files are present.
REM
REM 3. Build the "sqlite3.dll" and "sqlite3.lib" binaries for this
REM platform.
REM
REM 4. Copy the "sqlite3.dll" and "sqlite3.lib" binaries for this
REM platform to the platform-specific directory beneath the
REM binary directory.
REM
"%ComSpec%" /C (
REM
REM NOTE: Attempt to setup the MSVC environment for this platform.
REM
%__ECHO3% CALL "%VCINSTALLDIR%\vcvarsall.bat" %%P
IF ERRORLEVEL 1 (
ECHO Failed to call "%VCINSTALLDIR%\vcvarsall.bat" for platform %%P.
GOTO errors
)
REM
REM NOTE: If this batch file is not running in "what-if" mode, check to
REM be sure we were actually able to setup the MSVC environment
REM as current versions of their official batch file do not set
REM the exit code upon failure.
REM
IF NOT DEFINED __ECHO (
IF NOT DEFINED WindowsSdkDir (
ECHO Cannot build, Windows SDK not found for platform %%P.
GOTO errors
)
)
REM
REM NOTE: When using MSVC 2012, the native SDK path cannot simply use
REM the "lib" sub-directory beneath the location specified in the
REM WindowsSdkDir environment variable because that location does
REM not actually contain the necessary library files for x86.
REM This must be done for each iteration because it relies upon
REM the WindowsSdkDir environment variable being set by the batch
REM file used to setup the MSVC environment.
REM
IF DEFINED SET_NSDKLIBPATH (
CALL :fn_CopyVariable WindowsSdkDir NSDKLIBPATH
CALL :fn_AppendVariable NSDKLIBPATH \lib\win8\um\x86
)
REM
REM NOTE: Unless prevented from doing so, invoke NMAKE with the MSVC
REM makefile to clean any stale build output from previous
REM iterations of this loop and/or previous runs of this batch
REM file, etc.
REM
IF NOT DEFINED NOCLEAN (
%__ECHO% nmake -f Makefile.msc clean
IF ERRORLEVEL 1 (
ECHO Failed to clean for platform %%P.
GOTO errors
)
) ELSE (
REM
REM NOTE: Even when the cleaning step has been disabled, we still
REM need to remove the build output for the files we are
REM specifically wanting to build for each platform.
REM
%__ECHO% DEL /Q sqlite3.dll sqlite3.lib sqlite3.pdb
)
REM
REM NOTE: Call NMAKE with the MSVC makefile to build the "sqlite3.dll"
REM binary. The x86 compiler will be used to compile the native
REM command line tools needed during the build process itself.
REM Also, disable looking for and/or linking to the native Tcl
REM runtime library.
REM
%__ECHO% nmake -f Makefile.msc sqlite3.dll XCOMPILE=1 USE_NATIVE_LIBPATHS=1 NO_TCL=1 %NMAKE_ARGS%
IF ERRORLEVEL 1 (
ECHO Failed to build %%B "sqlite3.dll" for platform %%P.
GOTO errors
)
REM
REM NOTE: Copy the "sqlite3.dll" file to the appropriate directory for
REM the build and platform beneath the binary directory.
REM
%__ECHO% XCOPY sqlite3.dll "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%
IF ERRORLEVEL 1 (
ECHO Failed to copy "sqlite3.dll" to "%BINARYDIRECTORY%\%%B\%%D\".
GOTO errors
)
REM
REM NOTE: Copy the "sqlite3.lib" file to the appropriate directory for
REM the build and platform beneath the binary directory.
REM
%__ECHO% XCOPY sqlite3.lib "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%
IF ERRORLEVEL 1 (
ECHO Failed to copy "sqlite3.lib" to "%BINARYDIRECTORY%\%%B\%%D\".
GOTO errors
)
REM
REM NOTE: Copy the "sqlite3.pdb" file to the appropriate directory for
REM the build and platform beneath the binary directory unless we
REM are prevented from doing so.
REM
IF NOT DEFINED NOSYMBOLS (
%__ECHO% XCOPY sqlite3.pdb "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%
IF ERRORLEVEL 1 (
ECHO Failed to copy "sqlite3.pdb" to "%BINARYDIRECTORY%\%%B\%%D\".
GOTO errors
)
)
)
)
)
REM
REM NOTE: Handle any errors generated during the nested command shell.
REM
IF ERRORLEVEL 1 (
GOTO errors
)
)
REM
REM NOTE: Restore the saved current directory from the directory stack.
REM
%__ECHO2% POPD
IF ERRORLEVEL 1 (
ECHO Could not restore directory.
GOTO errors
)
REM
REM NOTE: If we get to this point, we have succeeded.
REM
GOTO no_errors
:fn_ResetErrorLevel
VERIFY > NUL
GOTO :EOF
:fn_SetErrorLevel
VERIFY MAYBE 2> NUL
GOTO :EOF
:fn_CopyVariable
SETLOCAL
IF NOT DEFINED %1 GOTO :EOF
IF "%2" == "" GOTO :EOF
SET __ECHO_CMD=ECHO %%%1%%
FOR /F "delims=" %%V IN ('%__ECHO_CMD%') DO (
SET VALUE=%%V
)
ENDLOCAL && SET %2=%VALUE%
GOTO :EOF
:fn_UnsetVariable
IF NOT "%1" == "" (
SET %1=
CALL :fn_ResetErrorLevel
)
GOTO :EOF
:fn_AppendVariable
SET __ECHO_CMD=ECHO %%%1%%
IF DEFINED %1 (
FOR /F "delims=" %%V IN ('%__ECHO_CMD%') DO (
SET %1=%%V%~2
)
) ELSE (
SET %1=%~2
)
SET __ECHO_CMD=
CALL :fn_ResetErrorLevel
GOTO :EOF
:usage
ECHO.
ECHO Usage: %~nx0 ^<binaryDirectory^>
ECHO.
GOTO errors
:errors
CALL :fn_SetErrorLevel
ENDLOCAL
ECHO.
ECHO Failure, errors were encountered.
GOTO end_of_file
:no_errors
CALL :fn_ResetErrorLevel
ENDLOCAL
ECHO.
ECHO Success, no errors were encountered.
GOTO end_of_file
:end_of_file
%__ECHO% EXIT /B %ERRORLEVEL%