SQLite

Artifact [6ff43bac]
Login

Artifact 6ff43bac175bd9ed79e7c0f96840b139f2f51d01689a638fd05128becf94908a:


/*
** 2004 May 22
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This file contains code that is specific to Windows.
*/
#include "sqliteInt.h"
#if SQLITE_OS_WIN               /* This file is used for Windows only */

/*
** Include code that is common to all os_*.c files
*/
#include "os_common.h"

/*
** Include the header file for the Windows VFS.
*/
#include "os_win.h"

/*
** Compiling and using WAL mode requires several APIs that are only
** available in Windows platforms based on the NT kernel.
*/
#if !SQLITE_OS_WINNT && !defined(SQLITE_OMIT_WAL)
#  error "WAL mode requires support from the Windows NT kernel, compile\
 with SQLITE_OMIT_WAL."
#endif

#if !SQLITE_OS_WINNT && SQLITE_MAX_MMAP_SIZE>0
#  error "Memory mapped files require support from the Windows NT kernel,\
 compile with SQLITE_MAX_MMAP_SIZE=0."
#endif

/*
** Are most of the Win32 ANSI APIs available (i.e. with certain exceptions
** based on the sub-platform)?
*/
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(SQLITE_WIN32_NO_ANSI)
#  define SQLITE_WIN32_HAS_ANSI
#endif

/*
** Are most of the Win32 Unicode APIs available (i.e. with certain exceptions
** based on the sub-platform)?
*/
#if (SQLITE_OS_WINCE || SQLITE_OS_WINNT || SQLITE_OS_WINRT) && \
    !defined(SQLITE_WIN32_NO_WIDE)
#  define SQLITE_WIN32_HAS_WIDE
#endif

/*
** Make sure at least one set of Win32 APIs is available.
*/
#if !defined(SQLITE_WIN32_HAS_ANSI) && !defined(SQLITE_WIN32_HAS_WIDE)
#  error "At least one of SQLITE_WIN32_HAS_ANSI and SQLITE_WIN32_HAS_WIDE\
 must be defined."
#endif

/*
** Define the required Windows SDK version constants if they are not
** already available.
*/
#ifndef NTDDI_WIN8
#  define NTDDI_WIN8                        0x06020000
#endif

#ifndef NTDDI_WINBLUE
#  define NTDDI_WINBLUE                     0x06030000
#endif

#ifndef NTDDI_WINTHRESHOLD
#  define NTDDI_WINTHRESHOLD                0x06040000
#endif

/*
** Check to see if the GetVersionEx[AW] functions are deprecated on the
** target system.  GetVersionEx was first deprecated in Win8.1.
*/
#ifndef SQLITE_WIN32_GETVERSIONEX
#  if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINBLUE
#    define SQLITE_WIN32_GETVERSIONEX   0   /* GetVersionEx() is deprecated */
#  else
#    define SQLITE_WIN32_GETVERSIONEX   1   /* GetVersionEx() is current */
#  endif
#endif

/*
** Check to see if the CreateFileMappingA function is supported on the
** target system.  It is unavailable when using "mincore.lib" on Win10.
** When compiling for Windows 10, always assume "mincore.lib" is in use.
*/
#ifndef SQLITE_WIN32_CREATEFILEMAPPINGA
#  if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINTHRESHOLD
#    define SQLITE_WIN32_CREATEFILEMAPPINGA   0
#  else
#    define SQLITE_WIN32_CREATEFILEMAPPINGA   1
#  endif
#endif

/*
** This constant should already be defined (in the "WinDef.h" SDK file).
*/
#ifndef MAX_PATH
#  define MAX_PATH                      (260)
#endif

/*
** Maximum pathname length (in chars) for Win32.  This should normally be
** MAX_PATH.
*/
#ifndef SQLITE_WIN32_MAX_PATH_CHARS
#  define SQLITE_WIN32_MAX_PATH_CHARS   (MAX_PATH)
#endif

/*
** This constant should already be defined (in the "WinNT.h" SDK file).
*/
#ifndef UNICODE_STRING_MAX_CHARS
#  define UNICODE_STRING_MAX_CHARS      (32767)
#endif

/*
** Maximum pathname length (in chars) for WinNT.  This should normally be
** UNICODE_STRING_MAX_CHARS.
*/
#ifndef SQLITE_WINNT_MAX_PATH_CHARS
#  define SQLITE_WINNT_MAX_PATH_CHARS   (UNICODE_STRING_MAX_CHARS)
#endif

/*
** Maximum pathname length (in bytes) for Win32.  The MAX_PATH macro is in
** characters, so we allocate 4 bytes per character assuming worst-case of
** 4-bytes-per-character for UTF8.
*/
#ifndef SQLITE_WIN32_MAX_PATH_BYTES
#  define SQLITE_WIN32_MAX_PATH_BYTES   (SQLITE_WIN32_MAX_PATH_CHARS*4)
#endif

/*
** Maximum pathname length (in bytes) for WinNT.  This should normally be
** UNICODE_STRING_MAX_CHARS * sizeof(WCHAR).
*/
#ifndef SQLITE_WINNT_MAX_PATH_BYTES
#  define SQLITE_WINNT_MAX_PATH_BYTES   \
                            (sizeof(WCHAR) * SQLITE_WINNT_MAX_PATH_CHARS)
#endif

/*
** Maximum error message length (in chars) for WinRT.
*/
#ifndef SQLITE_WIN32_MAX_ERRMSG_CHARS
#  define SQLITE_WIN32_MAX_ERRMSG_CHARS (1024)
#endif

/*
** Returns non-zero if the character should be treated as a directory
** separator.
*/
#ifndef winIsDirSep
#  define winIsDirSep(a)                (((a) == '/') || ((a) == '\\'))
#endif

/*
** This macro is used when a local variable is set to a value that is
** [sometimes] not used by the code (e.g. via conditional compilation).
*/
#ifndef UNUSED_VARIABLE_VALUE
#  define UNUSED_VARIABLE_VALUE(x)      (void)(x)
#endif

/*
** Returns the character that should be used as the directory separator.
*/
#ifndef winGetDirSep
#  define winGetDirSep()                '\\'
#endif

/*
** Do we need to manually define the Win32 file mapping APIs for use with WAL
** mode or memory mapped files (e.g. these APIs are available in the Windows
** CE SDK; however, they are not present in the header file)?
*/
#if SQLITE_WIN32_FILEMAPPING_API && \
        (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
/*
** Two of the file mapping APIs are different under WinRT.  Figure out which
** set we need.
*/
#if SQLITE_OS_WINRT
WINBASEAPI HANDLE WINAPI CreateFileMappingFromApp(HANDLE, \
        LPSECURITY_ATTRIBUTES, ULONG, ULONG64, LPCWSTR);

WINBASEAPI LPVOID WINAPI MapViewOfFileFromApp(HANDLE, ULONG, ULONG64, SIZE_T);
#else
#if defined(SQLITE_WIN32_HAS_ANSI)
WINBASEAPI HANDLE WINAPI CreateFileMappingA(HANDLE, LPSECURITY_ATTRIBUTES, \
        DWORD, DWORD, DWORD, LPCSTR);
#endif /* defined(SQLITE_WIN32_HAS_ANSI) */

#if defined(SQLITE_WIN32_HAS_WIDE)
WINBASEAPI HANDLE WINAPI CreateFileMappingW(HANDLE, LPSECURITY_ATTRIBUTES, \
        DWORD, DWORD, DWORD, LPCWSTR);
#endif /* defined(SQLITE_WIN32_HAS_WIDE) */

WINBASEAPI LPVOID WINAPI MapViewOfFile(HANDLE, DWORD, DWORD, DWORD, SIZE_T);
#endif /* SQLITE_OS_WINRT */

/*
** These file mapping APIs are common to both Win32 and WinRT.
*/

WINBASEAPI BOOL WINAPI FlushViewOfFile(LPCVOID, SIZE_T);
WINBASEAPI BOOL WINAPI UnmapViewOfFile(LPCVOID);
#endif /* SQLITE_WIN32_FILEMAPPING_API */

/*
** Some Microsoft compilers lack this definition.
*/
#ifndef INVALID_FILE_ATTRIBUTES
# define INVALID_FILE_ATTRIBUTES ((DWORD)-1)
#endif

#ifndef FILE_FLAG_MASK
# define FILE_FLAG_MASK          (0xFF3C0000)
#endif

#ifndef FILE_ATTRIBUTE_MASK
# define FILE_ATTRIBUTE_MASK     (0x0003FFF7)
#endif

#ifndef SQLITE_OMIT_WAL
/* Forward references to structures used for WAL */
typedef struct winShm winShm;           /* A connection to shared-memory */
typedef struct winShmNode winShmNode;   /* A region of shared-memory */
#endif

/*
** WinCE lacks native support for file locking so we have to fake it
** with some code of our own.
*/
#if SQLITE_OS_WINCE
typedef struct winceLock {
  int nReaders;       /* Number of reader locks obtained */
  BOOL bPending;      /* Indicates a pending lock has been obtained */
  BOOL bReserved;     /* Indicates a reserved lock has been obtained */
  BOOL bExclusive;    /* Indicates an exclusive lock has been obtained */
} winceLock;
#endif

/*
** The winFile structure is a subclass of sqlite3_file* specific to the win32
** portability layer.
*/
typedef struct winFile winFile;
struct winFile {
  const sqlite3_io_methods *pMethod; /*** Must be first ***/
  sqlite3_vfs *pVfs;      /* The VFS used to open this file */
  HANDLE h;               /* Handle for accessing the file */
  u8 locktype;            /* Type of lock currently held on this file */
  short sharedLockByte;   /* Randomly chosen byte used as a shared lock */
  u8 ctrlFlags;           /* Flags.  See WINFILE_* below */
  DWORD lastErrno;        /* The Windows errno from the last I/O error */
#ifndef SQLITE_OMIT_WAL
  winShm *pShm;           /* Instance of shared memory on this file */
#endif
  const char *zPath;      /* Full pathname of this file */
  int szChunk;            /* Chunk size configured by FCNTL_CHUNK_SIZE */
#if SQLITE_OS_WINCE
  LPWSTR zDeleteOnClose;  /* Name of file to delete when closing */
  HANDLE hMutex;          /* Mutex used to control access to shared lock */
  HANDLE hShared;         /* Shared memory segment used for locking */
  winceLock local;        /* Locks obtained by this instance of winFile */
  winceLock *shared;      /* Global shared lock memory for the file  */
#endif
#if SQLITE_MAX_MMAP_SIZE>0
  int nFetchOut;                /* Number of outstanding xFetch references */
  HANDLE hMap;                  /* Handle for accessing memory mapping */
  void *pMapRegion;             /* Area memory mapped */
  sqlite3_int64 mmapSize;       /* Size of mapped region */
  sqlite3_int64 mmapSizeMax;    /* Configured FCNTL_MMAP_SIZE value */
#endif
};

/*
** The winVfsAppData structure is used for the pAppData member for all of the
** Win32 VFS variants.
*/
typedef struct winVfsAppData winVfsAppData;
struct winVfsAppData {
  const sqlite3_io_methods *pMethod; /* The file I/O methods to use. */
  void *pAppData;                    /* The extra pAppData, if any. */
  BOOL bNoLock;                      /* Non-zero if locking is disabled. */
};

/*
** Allowed values for winFile.ctrlFlags
*/
#define WINFILE_RDONLY          0x02   /* Connection is read only */
#define WINFILE_PERSIST_WAL     0x04   /* Persistent WAL mode */
#define WINFILE_PSOW            0x10   /* SQLITE_IOCAP_POWERSAFE_OVERWRITE */

/*
 * The size of the buffer used by sqlite3_win32_write_debug().
 */
#ifndef SQLITE_WIN32_DBG_BUF_SIZE
#  define SQLITE_WIN32_DBG_BUF_SIZE   ((int)(4096-sizeof(DWORD)))
#endif

/*
 * If compiled with SQLITE_WIN32_MALLOC on Windows, we will use the
 * various Win32 API heap functions instead of our own.
 */
#ifdef SQLITE_WIN32_MALLOC

/*
 * If this is non-zero, an isolated heap will be created by the native Win32
 * allocator subsystem; otherwise, the default process heap will be used.  This
 * setting has no effect when compiling for WinRT.  By default, this is enabled
 * and an isolated heap will be created to store all allocated data.
 *
 ******************************************************************************
 * WARNING: It is important to note that when this setting is non-zero and the
 *          winMemShutdown function is called (e.g. by the sqlite3_shutdown
 *          function), all data that was allocated using the isolated heap will
 *          be freed immediately and any attempt to access any of that freed
 *          data will almost certainly result in an immediate access violation.
 ******************************************************************************
 */
#ifndef SQLITE_WIN32_HEAP_CREATE
#  define SQLITE_WIN32_HEAP_CREATE        (TRUE)
#endif

/*
 * This is the maximum possible initial size of the Win32-specific heap, in
 * bytes.
 */
#ifndef SQLITE_WIN32_HEAP_MAX_INIT_SIZE
#  define SQLITE_WIN32_HEAP_MAX_INIT_SIZE (4294967295U)
#endif

/*
 * This is the extra space for the initial size of the Win32-specific heap,
 * in bytes.  This value may be zero.
 */
#ifndef SQLITE_WIN32_HEAP_INIT_EXTRA
#  define SQLITE_WIN32_HEAP_INIT_EXTRA  (4194304)
#endif

/*
 * Calculate the maximum legal cache size, in pages, based on the maximum
 * possible initial heap size and the default page size, setting aside the
 * needed extra space.
 */
#ifndef SQLITE_WIN32_MAX_CACHE_SIZE
#  define SQLITE_WIN32_MAX_CACHE_SIZE   (((SQLITE_WIN32_HEAP_MAX_INIT_SIZE) - \
                                          (SQLITE_WIN32_HEAP_INIT_EXTRA)) / \
                                         (SQLITE_DEFAULT_PAGE_SIZE))
#endif

/*
 * This is cache size used in the calculation of the initial size of the
 * Win32-specific heap.  It cannot be negative.
 */
#ifndef SQLITE_WIN32_CACHE_SIZE
#  if SQLITE_DEFAULT_CACHE_SIZE>=0
#    define SQLITE_WIN32_CACHE_SIZE     (SQLITE_DEFAULT_CACHE_SIZE)
#  else
#    define SQLITE_WIN32_CACHE_SIZE     (-(SQLITE_DEFAULT_CACHE_SIZE))
#  endif
#endif

/*
 * Make sure that the calculated cache size, in pages, cannot cause the
 * initial size of the Win32-specific heap to exceed the maximum amount
 * of memory that can be specified in the call to HeapCreate.
 */
#if SQLITE_WIN32_CACHE_SIZE>SQLITE_WIN32_MAX_CACHE_SIZE
#  undef SQLITE_WIN32_CACHE_SIZE
#  define SQLITE_WIN32_CACHE_SIZE       (2000)
#endif

/*
 * The initial size of the Win32-specific heap.  This value may be zero.
 */
#ifndef SQLITE_WIN32_HEAP_INIT_SIZE
#  define SQLITE_WIN32_HEAP_INIT_SIZE   ((SQLITE_WIN32_CACHE_SIZE) * \
                                         (SQLITE_DEFAULT_PAGE_SIZE) + \
                                         (SQLITE_WIN32_HEAP_INIT_EXTRA))
#endif

/*
 * The maximum size of the Win32-specific heap.  This value may be zero.
 */
#ifndef SQLITE_WIN32_HEAP_MAX_SIZE
#  define SQLITE_WIN32_HEAP_MAX_SIZE    (0)
#endif

/*
 * The extra flags to use in calls to the Win32 heap APIs.  This value may be
 * zero for the default behavior.
 */
#ifndef SQLITE_WIN32_HEAP_FLAGS
#  define SQLITE_WIN32_HEAP_FLAGS       (0)
#endif


/*
** The winMemData structure stores information required by the Win32-specific
** sqlite3_mem_methods implementation.
*/
typedef struct winMemData winMemData;
struct winMemData {
#ifndef NDEBUG
  u32 magic1;   /* Magic number to detect structure corruption. */
#endif
  HANDLE hHeap; /* The handle to our heap. */
  BOOL bOwned;  /* Do we own the heap (i.e. destroy it on shutdown)? */
#ifndef NDEBUG
  u32 magic2;   /* Magic number to detect structure corruption. */
#endif
};

#ifndef NDEBUG
#define WINMEM_MAGIC1     0x42b2830b
#define WINMEM_MAGIC2     0xbd4d7cf4
#endif

static struct winMemData win_mem_data = {
#ifndef NDEBUG
  WINMEM_MAGIC1,
#endif
  NULL, FALSE
#ifndef NDEBUG
  ,WINMEM_MAGIC2
#endif
};

#ifndef NDEBUG
#define winMemAssertMagic1() assert( win_mem_data.magic1==WINMEM_MAGIC1 )
#define winMemAssertMagic2() assert( win_mem_data.magic2==WINMEM_MAGIC2 )
#define winMemAssertMagic()  winMemAssertMagic1(); winMemAssertMagic2();
#else
#define winMemAssertMagic()
#endif

#define winMemGetDataPtr()  &win_mem_data
#define winMemGetHeap()     win_mem_data.hHeap
#define winMemGetOwned()    win_mem_data.bOwned

static void *winMemMalloc(int nBytes);
static void winMemFree(void *pPrior);
static void *winMemRealloc(void *pPrior, int nBytes);
static int winMemSize(void *p);
static int winMemRoundup(int n);
static int winMemInit(void *pAppData);
static void winMemShutdown(void *pAppData);

const sqlite3_mem_methods *sqlite3MemGetWin32(void);
#endif /* SQLITE_WIN32_MALLOC */

/*
** The following variable is (normally) set once and never changes
** thereafter.  It records whether the operating system is Win9x
** or WinNT.
**
** 0:   Operating system unknown.
** 1:   Operating system is Win9x.
** 2:   Operating system is WinNT.
**
** In order to facilitate testing on a WinNT system, the test fixture
** can manually set this value to 1 to emulate Win98 behavior.
*/
#ifdef SQLITE_TEST
LONG SQLITE_WIN32_VOLATILE sqlite3_os_type = 0;
#else
static LONG SQLITE_WIN32_VOLATILE sqlite3_os_type = 0;
#endif

#ifndef SYSCALL
#  define SYSCALL sqlite3_syscall_ptr
#endif

/*
** This function is not available on Windows CE or WinRT.
 */

#if SQLITE_OS_WINCE || SQLITE_OS_WINRT
#  define osAreFileApisANSI()       1
#endif

/*
** Many system calls are accessed through pointer-to-functions so that
** they may be overridden at runtime to facilitate fault injection during
** testing and sandboxing.  The following array holds the names and pointers
** to all overrideable system calls.
*/
static struct win_syscall {
  const char *zName;            /* Name of the system call */
  sqlite3_syscall_ptr pCurrent; /* Current value of the system call */
  sqlite3_syscall_ptr pDefault; /* Default value */
} aSyscall[] = {
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
  { "AreFileApisANSI",         (SYSCALL)AreFileApisANSI,         0 },
#else
  { "AreFileApisANSI",         (SYSCALL)0,                       0 },
#endif

#ifndef osAreFileApisANSI
#define osAreFileApisANSI ((BOOL(WINAPI*)(VOID))aSyscall[0].pCurrent)
#endif

#if SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_WIDE)
  { "CharLowerW",              (SYSCALL)CharLowerW,              0 },
#else
  { "CharLowerW",              (SYSCALL)0,                       0 },
#endif

#define osCharLowerW ((LPWSTR(WINAPI*)(LPWSTR))aSyscall[1].pCurrent)

#if SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_WIDE)
  { "CharUpperW",              (SYSCALL)CharUpperW,              0 },
#else
  { "CharUpperW",              (SYSCALL)0,                       0 },
#endif

#define osCharUpperW ((LPWSTR(WINAPI*)(LPWSTR))aSyscall[2].pCurrent)

  { "CloseHandle",             (SYSCALL)CloseHandle,             0 },

#define osCloseHandle ((BOOL(WINAPI*)(HANDLE))aSyscall[3].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI)
  { "CreateFileA",             (SYSCALL)CreateFileA,             0 },
#else
  { "CreateFileA",             (SYSCALL)0,                       0 },
#endif

#define osCreateFileA ((HANDLE(WINAPI*)(LPCSTR,DWORD,DWORD, \
        LPSECURITY_ATTRIBUTES,DWORD,DWORD,HANDLE))aSyscall[4].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
  { "CreateFileW",             (SYSCALL)CreateFileW,             0 },
#else
  { "CreateFileW",             (SYSCALL)0,                       0 },
#endif

#define osCreateFileW ((HANDLE(WINAPI*)(LPCWSTR,DWORD,DWORD, \
        LPSECURITY_ATTRIBUTES,DWORD,DWORD,HANDLE))aSyscall[5].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_ANSI) && \
        (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) && \
        SQLITE_WIN32_CREATEFILEMAPPINGA
  { "CreateFileMappingA",      (SYSCALL)CreateFileMappingA,      0 },
#else
  { "CreateFileMappingA",      (SYSCALL)0,                       0 },
#endif

#define osCreateFileMappingA ((HANDLE(WINAPI*)(HANDLE,LPSECURITY_ATTRIBUTES, \
        DWORD,DWORD,DWORD,LPCSTR))aSyscall[6].pCurrent)

#if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
        (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0))
  { "CreateFileMappingW",      (SYSCALL)CreateFileMappingW,      0 },
#else
  { "CreateFileMappingW",      (SYSCALL)0,                       0 },
#endif

#define osCreateFileMappingW ((HANDLE(WINAPI*)(HANDLE,LPSECURITY_ATTRIBUTES, \
        DWORD,DWORD,DWORD,LPCWSTR))aSyscall[7].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
  { "CreateMutexW",            (SYSCALL)CreateMutexW,            0 },
#else
  { "CreateMutexW",            (SYSCALL)0,                       0 },
#endif

#define osCreateMutexW ((HANDLE(WINAPI*)(LPSECURITY_ATTRIBUTES,BOOL, \
        LPCWSTR))aSyscall[8].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI)
  { "DeleteFileA",             (SYSCALL)DeleteFileA,             0 },
#else
  { "DeleteFileA",             (SYSCALL)0,                       0 },
#endif

#define osDeleteFileA ((BOOL(WINAPI*)(LPCSTR))aSyscall[9].pCurrent)

#if defined(SQLITE_WIN32_HAS_WIDE)
  { "DeleteFileW",             (SYSCALL)DeleteFileW,             0 },
#else
  { "DeleteFileW",             (SYSCALL)0,                       0 },
#endif

#define osDeleteFileW ((BOOL(WINAPI*)(LPCWSTR))aSyscall[10].pCurrent)

#if SQLITE_OS_WINCE
  { "FileTimeToLocalFileTime", (SYSCALL)FileTimeToLocalFileTime, 0 },
#else
  { "FileTimeToLocalFileTime", (SYSCALL)0,                       0 },
#endif

#define osFileTimeToLocalFileTime ((BOOL(WINAPI*)(CONST FILETIME*, \
        LPFILETIME))aSyscall[11].pCurrent)

#if SQLITE_OS_WINCE
  { "FileTimeToSystemTime",    (SYSCALL)FileTimeToSystemTime,    0 },
#else
  { "FileTimeToSystemTime",    (SYSCALL)0,                       0 },
#endif

#define osFileTimeToSystemTime ((BOOL(WINAPI*)(CONST FILETIME*, \
        LPSYSTEMTIME))aSyscall[12].pCurrent)

  { "FlushFileBuffers",        (SYSCALL)FlushFileBuffers,        0 },

#define osFlushFileBuffers ((BOOL(WINAPI*)(HANDLE))aSyscall[13].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI)
  { "FormatMessageA",          (SYSCALL)FormatMessageA,          0 },
#else
  { "FormatMessageA",          (SYSCALL)0,                       0 },
#endif

#define osFormatMessageA ((DWORD(WINAPI*)(DWORD,LPCVOID,DWORD,DWORD,LPSTR, \
        DWORD,va_list*))aSyscall[14].pCurrent)

#if defined(SQLITE_WIN32_HAS_WIDE)
  { "FormatMessageW",          (SYSCALL)FormatMessageW,          0 },
#else
  { "FormatMessageW",          (SYSCALL)0,                       0 },
#endif

#define osFormatMessageW ((DWORD(WINAPI*)(DWORD,LPCVOID,DWORD,DWORD,LPWSTR, \
        DWORD,va_list*))aSyscall[15].pCurrent)

#if !defined(SQLITE_OMIT_LOAD_EXTENSION)
  { "FreeLibrary",             (SYSCALL)FreeLibrary,             0 },
#else
  { "FreeLibrary",             (SYSCALL)0,                       0 },
#endif

#define osFreeLibrary ((BOOL(WINAPI*)(HMODULE))aSyscall[16].pCurrent)

  { "GetCurrentProcessId",     (SYSCALL)GetCurrentProcessId,     0 },

#define osGetCurrentProcessId ((DWORD(WINAPI*)(VOID))aSyscall[17].pCurrent)

#if !SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_ANSI)
  { "GetDiskFreeSpaceA",       (SYSCALL)GetDiskFreeSpaceA,       0 },
#else
  { "GetDiskFreeSpaceA",       (SYSCALL)0,                       0 },
#endif

#define osGetDiskFreeSpaceA ((BOOL(WINAPI*)(LPCSTR,LPDWORD,LPDWORD,LPDWORD, \
        LPDWORD))aSyscall[18].pCurrent)

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
  { "GetDiskFreeSpaceW",       (SYSCALL)GetDiskFreeSpaceW,       0 },
#else
  { "GetDiskFreeSpaceW",       (SYSCALL)0,                       0 },
#endif

#define osGetDiskFreeSpaceW ((BOOL(WINAPI*)(LPCWSTR,LPDWORD,LPDWORD,LPDWORD, \
        LPDWORD))aSyscall[19].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI)
  { "GetFileAttributesA",      (SYSCALL)GetFileAttributesA,      0 },
#else
  { "GetFileAttributesA",      (SYSCALL)0,                       0 },
#endif

#define osGetFileAttributesA ((DWORD(WINAPI*)(LPCSTR))aSyscall[20].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
  { "GetFileAttributesW",      (SYSCALL)GetFileAttributesW,      0 },
#else
  { "GetFileAttributesW",      (SYSCALL)0,                       0 },
#endif

#define osGetFileAttributesW ((DWORD(WINAPI*)(LPCWSTR))aSyscall[21].pCurrent)

#if defined(SQLITE_WIN32_HAS_WIDE)
  { "GetFileAttributesExW",    (SYSCALL)GetFileAttributesExW,    0 },
#else
  { "GetFileAttributesExW",    (SYSCALL)0,                       0 },
#endif

#define osGetFileAttributesExW ((BOOL(WINAPI*)(LPCWSTR,GET_FILEEX_INFO_LEVELS, \
        LPVOID))aSyscall[22].pCurrent)

#if !SQLITE_OS_WINRT
  { "GetFileSize",             (SYSCALL)GetFileSize,             0 },
#else
  { "GetFileSize",             (SYSCALL)0,                       0 },
#endif

#define osGetFileSize ((DWORD(WINAPI*)(HANDLE,LPDWORD))aSyscall[23].pCurrent)

#if !SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_ANSI)
  { "GetFullPathNameA",        (SYSCALL)GetFullPathNameA,        0 },
#else
  { "GetFullPathNameA",        (SYSCALL)0,                       0 },
#endif

#define osGetFullPathNameA ((DWORD(WINAPI*)(LPCSTR,DWORD,LPSTR, \
        LPSTR*))aSyscall[24].pCurrent)

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
  { "GetFullPathNameW",        (SYSCALL)GetFullPathNameW,        0 },
#else
  { "GetFullPathNameW",        (SYSCALL)0,                       0 },
#endif

#define osGetFullPathNameW ((DWORD(WINAPI*)(LPCWSTR,DWORD,LPWSTR, \
        LPWSTR*))aSyscall[25].pCurrent)

  { "GetLastError",            (SYSCALL)GetLastError,            0 },

#define osGetLastError ((DWORD(WINAPI*)(VOID))aSyscall[26].pCurrent)

#if !defined(SQLITE_OMIT_LOAD_EXTENSION)
#if SQLITE_OS_WINCE
  /* The GetProcAddressA() routine is only available on Windows CE. */
  { "GetProcAddressA",         (SYSCALL)GetProcAddressA,         0 },
#else
  /* All other Windows platforms expect GetProcAddress() to take
  ** an ANSI string regardless of the _UNICODE setting */
  { "GetProcAddressA",         (SYSCALL)GetProcAddress,          0 },
#endif
#else
  { "GetProcAddressA",         (SYSCALL)0,                       0 },
#endif

#define osGetProcAddressA ((FARPROC(WINAPI*)(HMODULE, \
        LPCSTR))aSyscall[27].pCurrent)

#if !SQLITE_OS_WINRT
  { "GetSystemInfo",           (SYSCALL)GetSystemInfo,           0 },
#else
  { "GetSystemInfo",           (SYSCALL)0,                       0 },
#endif

#define osGetSystemInfo ((VOID(WINAPI*)(LPSYSTEM_INFO))aSyscall[28].pCurrent)

  { "GetSystemTime",           (SYSCALL)GetSystemTime,           0 },

#define osGetSystemTime ((VOID(WINAPI*)(LPSYSTEMTIME))aSyscall[29].pCurrent)

#if !SQLITE_OS_WINCE
  { "GetSystemTimeAsFileTime", (SYSCALL)GetSystemTimeAsFileTime, 0 },
#else
  { "GetSystemTimeAsFileTime", (SYSCALL)0,                       0 },
#endif

#define osGetSystemTimeAsFileTime ((VOID(WINAPI*)( \
        LPFILETIME))aSyscall[30].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI)
  { "GetTempPathA",            (SYSCALL)GetTempPathA,            0 },
#else
  { "GetTempPathA",            (SYSCALL)0,                       0 },
#endif

#define osGetTempPathA ((DWORD(WINAPI*)(DWORD,LPSTR))aSyscall[31].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
  { "GetTempPathW",            (SYSCALL)GetTempPathW,            0 },
#else
  { "GetTempPathW",            (SYSCALL)0,                       0 },
#endif

#define osGetTempPathW ((DWORD(WINAPI*)(DWORD,LPWSTR))aSyscall[32].pCurrent)

#if !SQLITE_OS_WINRT
  { "GetTickCount",            (SYSCALL)GetTickCount,            0 },
#else
  { "GetTickCount",            (SYSCALL)0,                       0 },
#endif

#define osGetTickCount ((DWORD(WINAPI*)(VOID))aSyscall[33].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_GETVERSIONEX
  { "GetVersionExA",           (SYSCALL)GetVersionExA,           0 },
#else
  { "GetVersionExA",           (SYSCALL)0,                       0 },
#endif

#define osGetVersionExA ((BOOL(WINAPI*)( \
        LPOSVERSIONINFOA))aSyscall[34].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
        SQLITE_WIN32_GETVERSIONEX
  { "GetVersionExW",           (SYSCALL)GetVersionExW,           0 },
#else
  { "GetVersionExW",           (SYSCALL)0,                       0 },
#endif

#define osGetVersionExW ((BOOL(WINAPI*)( \
        LPOSVERSIONINFOW))aSyscall[35].pCurrent)

  { "HeapAlloc",               (SYSCALL)HeapAlloc,               0 },

#define osHeapAlloc ((LPVOID(WINAPI*)(HANDLE,DWORD, \
        SIZE_T))aSyscall[36].pCurrent)

#if !SQLITE_OS_WINRT
  { "HeapCreate",              (SYSCALL)HeapCreate,              0 },
#else
  { "HeapCreate",              (SYSCALL)0,                       0 },
#endif

#define osHeapCreate ((HANDLE(WINAPI*)(DWORD,SIZE_T, \
        SIZE_T))aSyscall[37].pCurrent)

#if !SQLITE_OS_WINRT
  { "HeapDestroy",             (SYSCALL)HeapDestroy,             0 },
#else
  { "HeapDestroy",             (SYSCALL)0,                       0 },
#endif

#define osHeapDestroy ((BOOL(WINAPI*)(HANDLE))aSyscall[38].pCurrent)

  { "HeapFree",                (SYSCALL)HeapFree,                0 },

#define osHeapFree ((BOOL(WINAPI*)(HANDLE,DWORD,LPVOID))aSyscall[39].pCurrent)

  { "HeapReAlloc",             (SYSCALL)HeapReAlloc,             0 },

#define osHeapReAlloc ((LPVOID(WINAPI*)(HANDLE,DWORD,LPVOID, \
        SIZE_T))aSyscall[40].pCurrent)

  { "HeapSize",                (SYSCALL)HeapSize,                0 },

#define osHeapSize ((SIZE_T(WINAPI*)(HANDLE,DWORD, \
        LPCVOID))aSyscall[41].pCurrent)

#if !SQLITE_OS_WINRT
  { "HeapValidate",            (SYSCALL)HeapValidate,            0 },
#else
  { "HeapValidate",            (SYSCALL)0,                       0 },
#endif

#define osHeapValidate ((BOOL(WINAPI*)(HANDLE,DWORD, \
        LPCVOID))aSyscall[42].pCurrent)

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
  { "HeapCompact",             (SYSCALL)HeapCompact,             0 },
#else
  { "HeapCompact",             (SYSCALL)0,                       0 },
#endif

#define osHeapCompact ((UINT(WINAPI*)(HANDLE,DWORD))aSyscall[43].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI) && !defined(SQLITE_OMIT_LOAD_EXTENSION)
  { "LoadLibraryA",            (SYSCALL)LoadLibraryA,            0 },
#else
  { "LoadLibraryA",            (SYSCALL)0,                       0 },
#endif

#define osLoadLibraryA ((HMODULE(WINAPI*)(LPCSTR))aSyscall[44].pCurrent)

#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
        !defined(SQLITE_OMIT_LOAD_EXTENSION)
  { "LoadLibraryW",            (SYSCALL)LoadLibraryW,            0 },
#else
  { "LoadLibraryW",            (SYSCALL)0,                       0 },
#endif

#define osLoadLibraryW ((HMODULE(WINAPI*)(LPCWSTR))aSyscall[45].pCurrent)

#if !SQLITE_OS_WINRT
  { "LocalFree",               (SYSCALL)LocalFree,               0 },
#else
  { "LocalFree",               (SYSCALL)0,                       0 },
#endif

#define osLocalFree ((HLOCAL(WINAPI*)(HLOCAL))aSyscall[46].pCurrent)

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
  { "LockFile",                (SYSCALL)LockFile,                0 },
#else
  { "LockFile",                (SYSCALL)0,                       0 },
#endif

#ifndef osLockFile
#define osLockFile ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
        DWORD))aSyscall[47].pCurrent)
#endif

#if !SQLITE_OS_WINCE
  { "LockFileEx",              (SYSCALL)LockFileEx,              0 },
#else
  { "LockFileEx",              (SYSCALL)0,                       0 },
#endif

#ifndef osLockFileEx
#define osLockFileEx ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD,DWORD, \
        LPOVERLAPPED))aSyscall[48].pCurrent)
#endif

#if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && \
        (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0))
  { "MapViewOfFile",           (SYSCALL)MapViewOfFile,           0 },
#else
  { "MapViewOfFile",           (SYSCALL)0,                       0 },
#endif

#define osMapViewOfFile ((LPVOID(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
        SIZE_T))aSyscall[49].pCurrent)

  { "MultiByteToWideChar",     (SYSCALL)MultiByteToWideChar,     0 },

#define osMultiByteToWideChar ((int(WINAPI*)(UINT,DWORD,LPCSTR,int,LPWSTR, \
        int))aSyscall[50].pCurrent)

  { "QueryPerformanceCounter", (SYSCALL)QueryPerformanceCounter, 0 },

#define osQueryPerformanceCounter ((BOOL(WINAPI*)( \
        LARGE_INTEGER*))aSyscall[51].pCurrent)

  { "ReadFile",                (SYSCALL)ReadFile,                0 },

#define osReadFile ((BOOL(WINAPI*)(HANDLE,LPVOID,DWORD,LPDWORD, \
        LPOVERLAPPED))aSyscall[52].pCurrent)

  { "SetEndOfFile",            (SYSCALL)SetEndOfFile,            0 },

#define osSetEndOfFile ((BOOL(WINAPI*)(HANDLE))aSyscall[53].pCurrent)

#if !SQLITE_OS_WINRT
  { "SetFilePointer",          (SYSCALL)SetFilePointer,          0 },
#else
  { "SetFilePointer",          (SYSCALL)0,                       0 },
#endif

#define osSetFilePointer ((DWORD(WINAPI*)(HANDLE,LONG,PLONG, \
        DWORD))aSyscall[54].pCurrent)

#if !SQLITE_OS_WINRT
  { "Sleep",                   (SYSCALL)Sleep,                   0 },
#else
  { "Sleep",                   (SYSCALL)0,                       0 },
#endif

#define osSleep ((VOID(WINAPI*)(DWORD))aSyscall[55].pCurrent)

  { "SystemTimeToFileTime",    (SYSCALL)SystemTimeToFileTime,    0 },

#define osSystemTimeToFileTime ((BOOL(WINAPI*)(CONST SYSTEMTIME*, \
        LPFILETIME))aSyscall[56].pCurrent)

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
  { "UnlockFile",              (SYSCALL)UnlockFile,              0 },
#else
  { "UnlockFile",              (SYSCALL)0,                       0 },
#endif

#ifndef osUnlockFile
#define osUnlockFile ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
        DWORD))aSyscall[57].pCurrent)
#endif

#if !SQLITE_OS_WINCE
  { "UnlockFileEx",            (SYSCALL)UnlockFileEx,            0 },
#else
  { "UnlockFileEx",            (SYSCALL)0,                       0 },
#endif

#define osUnlockFileEx ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
        LPOVERLAPPED))aSyscall[58].pCurrent)

#if SQLITE_OS_WINCE || !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
  { "UnmapViewOfFile",         (SYSCALL)UnmapViewOfFile,         0 },
#else
  { "UnmapViewOfFile",         (SYSCALL)0,                       0 },
#endif

#define osUnmapViewOfFile ((BOOL(WINAPI*)(LPCVOID))aSyscall[59].pCurrent)

  { "WideCharToMultiByte",     (SYSCALL)WideCharToMultiByte,     0 },

#define osWideCharToMultiByte ((int(WINAPI*)(UINT,DWORD,LPCWSTR,int,LPSTR,int, \
        LPCSTR,LPBOOL))aSyscall[60].pCurrent)

  { "WriteFile",               (SYSCALL)WriteFile,               0 },

#define osWriteFile ((BOOL(WINAPI*)(HANDLE,LPCVOID,DWORD,LPDWORD, \
        LPOVERLAPPED))aSyscall[61].pCurrent)

#if SQLITE_OS_WINRT
  { "CreateEventExW",          (SYSCALL)CreateEventExW,          0 },
#else
  { "CreateEventExW",          (SYSCALL)0,                       0 },
#endif

#define osCreateEventExW ((HANDLE(WINAPI*)(LPSECURITY_ATTRIBUTES,LPCWSTR, \
        DWORD,DWORD))aSyscall[62].pCurrent)

#if !SQLITE_OS_WINRT
  { "WaitForSingleObject",     (SYSCALL)WaitForSingleObject,     0 },
#else
  { "WaitForSingleObject",     (SYSCALL)0,                       0 },
#endif

#define osWaitForSingleObject ((DWORD(WINAPI*)(HANDLE, \
        DWORD))aSyscall[63].pCurrent)

#if !SQLITE_OS_WINCE
  { "WaitForSingleObjectEx",   (SYSCALL)WaitForSingleObjectEx,   0 },
#else
  { "WaitForSingleObjectEx",   (SYSCALL)0,                       0 },
#endif

#define osWaitForSingleObjectEx ((DWORD(WINAPI*)(HANDLE,DWORD, \
        BOOL))aSyscall[64].pCurrent)

#if SQLITE_OS_WINRT
  { "SetFilePointerEx",        (SYSCALL)SetFilePointerEx,        0 },
#else
  { "SetFilePointerEx",        (SYSCALL)0,                       0 },
#endif

#define osSetFilePointerEx ((BOOL(WINAPI*)(HANDLE,LARGE_INTEGER, \
        PLARGE_INTEGER,DWORD))aSyscall[65].pCurrent)

#if SQLITE_OS_WINRT
  { "GetFileInformationByHandleEx", (SYSCALL)GetFileInformationByHandleEx, 0 },
#else
  { "GetFileInformationByHandleEx", (SYSCALL)0,                  0 },
#endif

#define osGetFileInformationByHandleEx ((BOOL(WINAPI*)(HANDLE, \
        FILE_INFO_BY_HANDLE_CLASS,LPVOID,DWORD))aSyscall[66].pCurrent)

#if SQLITE_OS_WINRT && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
  { "MapViewOfFileFromApp",    (SYSCALL)MapViewOfFileFromApp,    0 },
#else
  { "MapViewOfFileFromApp",    (SYSCALL)0,                       0 },
#endif

#define osMapViewOfFileFromApp ((LPVOID(WINAPI*)(HANDLE,ULONG,ULONG64, \
        SIZE_T))aSyscall[67].pCurrent)

#if SQLITE_OS_WINRT
  { "CreateFile2",             (SYSCALL)CreateFile2,             0 },
#else
  { "CreateFile2",             (SYSCALL)0,                       0 },
#endif

#define osCreateFile2 ((HANDLE(WINAPI*)(LPCWSTR,DWORD,DWORD,DWORD, \
        LPCREATEFILE2_EXTENDED_PARAMETERS))aSyscall[68].pCurrent)

#if SQLITE_OS_WINRT && !defined(SQLITE_OMIT_LOAD_EXTENSION)
  { "LoadPackagedLibrary",     (SYSCALL)LoadPackagedLibrary,     0 },
#else
  { "LoadPackagedLibrary",     (SYSCALL)0,                       0 },
#endif

#define osLoadPackagedLibrary ((HMODULE(WINAPI*)(LPCWSTR, \
        DWORD))aSyscall[69].pCurrent)

#if SQLITE_OS_WINRT
  { "GetTickCount64",          (SYSCALL)GetTickCount64,          0 },
#else
  { "GetTickCount64",          (SYSCALL)0,                       0 },
#endif

#define osGetTickCount64 ((ULONGLONG(WINAPI*)(VOID))aSyscall[70].pCurrent)

#if SQLITE_OS_WINRT
  { "GetNativeSystemInfo",     (SYSCALL)GetNativeSystemInfo,     0 },
#else
  { "GetNativeSystemInfo",     (SYSCALL)0,                       0 },
#endif

#define osGetNativeSystemInfo ((VOID(WINAPI*)( \
        LPSYSTEM_INFO))aSyscall[71].pCurrent)

#if defined(SQLITE_WIN32_HAS_ANSI)
  { "OutputDebugStringA",      (SYSCALL)OutputDebugStringA,      0 },
#else
  { "OutputDebugStringA",      (SYSCALL)0,                       0 },
#endif

#define osOutputDebugStringA ((VOID(WINAPI*)(LPCSTR))aSyscall[72].pCurrent)

#if defined(SQLITE_WIN32_HAS_WIDE)
  { "OutputDebugStringW",      (SYSCALL)OutputDebugStringW,      0 },
#else
  { "OutputDebugStringW",      (SYSCALL)0,                       0 },
#endif

#define osOutputDebugStringW ((VOID(WINAPI*)(LPCWSTR))aSyscall[73].pCurrent)

  { "GetProcessHeap",          (SYSCALL)GetProcessHeap,          0 },

#define osGetProcessHeap ((HANDLE(WINAPI*)(VOID))aSyscall[74].pCurrent)

#if SQLITE_OS_WINRT && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
  { "CreateFileMappingFromApp", (SYSCALL)CreateFileMappingFromApp, 0 },
#else
  { "CreateFileMappingFromApp", (SYSCALL)0,                      0 },
#endif

#define osCreateFileMappingFromApp ((HANDLE(WINAPI*)(HANDLE, \
        LPSECURITY_ATTRIBUTES,ULONG,ULONG64,LPCWSTR))aSyscall[75].pCurrent)

/*
** NOTE: On some sub-platforms, the InterlockedCompareExchange "function"
**       is really just a macro that uses a compiler intrinsic (e.g. x64).
**       So do not try to make this is into a redefinable interface.
*/
#if defined(InterlockedCompareExchange)
  { "InterlockedCompareExchange", (SYSCALL)0,                    0 },

#define osInterlockedCompareExchange InterlockedCompareExchange
#else
  { "InterlockedCompareExchange", (SYSCALL)InterlockedCompareExchange, 0 },

#define osInterlockedCompareExchange ((LONG(WINAPI*)(LONG \
        SQLITE_WIN32_VOLATILE*, LONG,LONG))aSyscall[76].pCurrent)
#endif /* defined(InterlockedCompareExchange) */

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
  { "UuidCreate",               (SYSCALL)UuidCreate,             0 },
#else
  { "UuidCreate",               (SYSCALL)0,                      0 },
#endif

#define osUuidCreate ((RPC_STATUS(RPC_ENTRY*)(UUID*))aSyscall[77].pCurrent)

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
  { "UuidCreateSequential",     (SYSCALL)UuidCreateSequential,   0 },
#else
  { "UuidCreateSequential",     (SYSCALL)0,                      0 },
#endif

#define osUuidCreateSequential \
        ((RPC_STATUS(RPC_ENTRY*)(UUID*))aSyscall[78].pCurrent)

#if !defined(SQLITE_NO_SYNC) && SQLITE_MAX_MMAP_SIZE>0
  { "FlushViewOfFile",          (SYSCALL)FlushViewOfFile,        0 },
#else
  { "FlushViewOfFile",          (SYSCALL)0,                      0 },
#endif

#define osFlushViewOfFile \
        ((BOOL(WINAPI*)(LPCVOID,SIZE_T))aSyscall[79].pCurrent)

}; /* End of the overrideable system calls */

/*
** This is the xSetSystemCall() method of sqlite3_vfs for all of the
** "win32" VFSes.  Return SQLITE_OK upon successfully updating the
** system call pointer, or SQLITE_NOTFOUND if there is no configurable
** system call named zName.
*/
static int winSetSystemCall(
  sqlite3_vfs *pNotUsed,        /* The VFS pointer.  Not used */
  const char *zName,            /* Name of system call to override */
  sqlite3_syscall_ptr pNewFunc  /* Pointer to new system call value */
){
  unsigned int i;
  int rc = SQLITE_NOTFOUND;

  UNUSED_PARAMETER(pNotUsed);
  if( zName==0 ){
    /* If no zName is given, restore all system calls to their default
    ** settings and return NULL
    */
    rc = SQLITE_OK;
    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
      if( aSyscall[i].pDefault ){
        aSyscall[i].pCurrent = aSyscall[i].pDefault;
      }
    }
  }else{
    /* If zName is specified, operate on only the one system call
    ** specified.
    */
    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
      if( strcmp(zName, aSyscall[i].zName)==0 ){
        if( aSyscall[i].pDefault==0 ){
          aSyscall[i].pDefault = aSyscall[i].pCurrent;
        }
        rc = SQLITE_OK;
        if( pNewFunc==0 ) pNewFunc = aSyscall[i].pDefault;
        aSyscall[i].pCurrent = pNewFunc;
        break;
      }
    }
  }
  return rc;
}

/*
** Return the value of a system call.  Return NULL if zName is not a
** recognized system call name.  NULL is also returned if the system call
** is currently undefined.
*/
static sqlite3_syscall_ptr winGetSystemCall(
  sqlite3_vfs *pNotUsed,
  const char *zName
){
  unsigned int i;

  UNUSED_PARAMETER(pNotUsed);
  for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
    if( strcmp(zName, aSyscall[i].zName)==0 ) return aSyscall[i].pCurrent;
  }
  return 0;
}

/*
** Return the name of the first system call after zName.  If zName==NULL
** then return the name of the first system call.  Return NULL if zName
** is the last system call or if zName is not the name of a valid
** system call.
*/
static const char *winNextSystemCall(sqlite3_vfs *p, const char *zName){
  int i = -1;

  UNUSED_PARAMETER(p);
  if( zName ){
    for(i=0; i<ArraySize(aSyscall)-1; i++){
      if( strcmp(zName, aSyscall[i].zName)==0 ) break;
    }
  }
  for(i++; i<ArraySize(aSyscall); i++){
    if( aSyscall[i].pCurrent!=0 ) return aSyscall[i].zName;
  }
  return 0;
}

#ifdef SQLITE_WIN32_MALLOC
/*
** If a Win32 native heap has been configured, this function will attempt to
** compact it.  Upon success, SQLITE_OK will be returned.  Upon failure, one
** of SQLITE_NOMEM, SQLITE_ERROR, or SQLITE_NOTFOUND will be returned.  The
** "pnLargest" argument, if non-zero, will be used to return the size of the
** largest committed free block in the heap, in bytes.
*/
int sqlite3_win32_compact_heap(LPUINT pnLargest){
  int rc = SQLITE_OK;
  UINT nLargest = 0;
  HANDLE hHeap;

  winMemAssertMagic();
  hHeap = winMemGetHeap();
  assert( hHeap!=0 );
  assert( hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
  assert( osHeapValidate(hHeap, SQLITE_WIN32_HEAP_FLAGS, NULL) );
#endif
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
  if( (nLargest=osHeapCompact(hHeap, SQLITE_WIN32_HEAP_FLAGS))==0 ){
    DWORD lastErrno = osGetLastError();
    if( lastErrno==NO_ERROR ){
      sqlite3_log(SQLITE_NOMEM, "failed to HeapCompact (no space), heap=%p",
                  (void*)hHeap);
      rc = SQLITE_NOMEM_BKPT;
    }else{
      sqlite3_log(SQLITE_ERROR, "failed to HeapCompact (%lu), heap=%p",
                  osGetLastError(), (void*)hHeap);
      rc = SQLITE_ERROR;
    }
  }
#else
  sqlite3_log(SQLITE_NOTFOUND, "failed to HeapCompact, heap=%p",
              (void*)hHeap);
  rc = SQLITE_NOTFOUND;
#endif
  if( pnLargest ) *pnLargest = nLargest;
  return rc;
}

/*
** If a Win32 native heap has been configured, this function will attempt to
** destroy and recreate it.  If the Win32 native heap is not isolated and/or
** the sqlite3_memory_used() function does not return zero, SQLITE_BUSY will
** be returned and no changes will be made to the Win32 native heap.
*/
int sqlite3_win32_reset_heap(){
  int rc;
  MUTEX_LOGIC( sqlite3_mutex *pMainMtx; ) /* The main static mutex */
  MUTEX_LOGIC( sqlite3_mutex *pMem; )    /* The memsys static mutex */
  MUTEX_LOGIC( pMainMtx = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MAIN); )
  MUTEX_LOGIC( pMem = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM); )
  sqlite3_mutex_enter(pMainMtx);
  sqlite3_mutex_enter(pMem);
  winMemAssertMagic();
  if( winMemGetHeap()!=NULL && winMemGetOwned() && sqlite3_memory_used()==0 ){
    /*
    ** At this point, there should be no outstanding memory allocations on
    ** the heap.  Also, since both the main and memsys locks are currently
    ** being held by us, no other function (i.e. from another thread) should
    ** be able to even access the heap.  Attempt to destroy and recreate our
    ** isolated Win32 native heap now.
    */
    assert( winMemGetHeap()!=NULL );
    assert( winMemGetOwned() );
    assert( sqlite3_memory_used()==0 );
    winMemShutdown(winMemGetDataPtr());
    assert( winMemGetHeap()==NULL );
    assert( !winMemGetOwned() );
    assert( sqlite3_memory_used()==0 );
    rc = winMemInit(winMemGetDataPtr());
    assert( rc!=SQLITE_OK || winMemGetHeap()!=NULL );
    assert( rc!=SQLITE_OK || winMemGetOwned() );
    assert( rc!=SQLITE_OK || sqlite3_memory_used()==0 );
  }else{
    /*
    ** The Win32 native heap cannot be modified because it may be in use.
    */
    rc = SQLITE_BUSY;
  }
  sqlite3_mutex_leave(pMem);
  sqlite3_mutex_leave(pMainMtx);
  return rc;
}
#endif /* SQLITE_WIN32_MALLOC */

/*
** This function outputs the specified (ANSI) string to the Win32 debugger
** (if available).
*/

void sqlite3_win32_write_debug(const char *zBuf, int nBuf){
  char zDbgBuf[SQLITE_WIN32_DBG_BUF_SIZE];
  int nMin = MIN(nBuf, (SQLITE_WIN32_DBG_BUF_SIZE - 1)); /* may be negative. */
  if( nMin<-1 ) nMin = -1; /* all negative values become -1. */
  assert( nMin==-1 || nMin==0 || nMin<SQLITE_WIN32_DBG_BUF_SIZE );
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zBuf ){
    (void)SQLITE_MISUSE_BKPT;
    return;
  }
#endif
#if defined(SQLITE_WIN32_HAS_ANSI)
  if( nMin>0 ){
    memset(zDbgBuf, 0, SQLITE_WIN32_DBG_BUF_SIZE);
    memcpy(zDbgBuf, zBuf, nMin);
    osOutputDebugStringA(zDbgBuf);
  }else{
    osOutputDebugStringA(zBuf);
  }
#elif defined(SQLITE_WIN32_HAS_WIDE)
  memset(zDbgBuf, 0, SQLITE_WIN32_DBG_BUF_SIZE);
  if ( osMultiByteToWideChar(
          osAreFileApisANSI() ? CP_ACP : CP_OEMCP, 0, zBuf,
          nMin, (LPWSTR)zDbgBuf, SQLITE_WIN32_DBG_BUF_SIZE/sizeof(WCHAR))<=0 ){
    return;
  }
  osOutputDebugStringW((LPCWSTR)zDbgBuf);
#else
  if( nMin>0 ){
    memset(zDbgBuf, 0, SQLITE_WIN32_DBG_BUF_SIZE);
    memcpy(zDbgBuf, zBuf, nMin);
    fprintf(stderr, "%s", zDbgBuf);
  }else{
    fprintf(stderr, "%s", zBuf);
  }
#endif
}

/*
** The following routine suspends the current thread for at least ms
** milliseconds.  This is equivalent to the Win32 Sleep() interface.
*/
#if SQLITE_OS_WINRT
static HANDLE sleepObj = NULL;
#endif

void sqlite3_win32_sleep(DWORD milliseconds){
#if SQLITE_OS_WINRT
  if ( sleepObj==NULL ){
    sleepObj = osCreateEventExW(NULL, NULL, CREATE_EVENT_MANUAL_RESET,
                                SYNCHRONIZE);
  }
  assert( sleepObj!=NULL );
  osWaitForSingleObjectEx(sleepObj, milliseconds, FALSE);
#else
  osSleep(milliseconds);
#endif
}

#if SQLITE_MAX_WORKER_THREADS>0 && !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && \
        SQLITE_THREADSAFE>0
DWORD sqlite3Win32Wait(HANDLE hObject){
  DWORD rc;
  while( (rc = osWaitForSingleObjectEx(hObject, INFINITE,
                                       TRUE))==WAIT_IO_COMPLETION ){}
  return rc;
}
#endif

/*
** Return true (non-zero) if we are running under WinNT, Win2K, WinXP,
** or WinCE.  Return false (zero) for Win95, Win98, or WinME.
**
** Here is an interesting observation:  Win95, Win98, and WinME lack
** the LockFileEx() API.  But we can still statically link against that
** API as long as we don't call it when running Win95/98/ME.  A call to
** this routine is used to determine if the host is Win95/98/ME or
** WinNT/2K/XP so that we will know whether or not we can safely call
** the LockFileEx() API.
*/

#if !SQLITE_WIN32_GETVERSIONEX
# define osIsNT()  (1)
#elif SQLITE_OS_WINCE || SQLITE_OS_WINRT || !defined(SQLITE_WIN32_HAS_ANSI)
# define osIsNT()  (1)
#elif !defined(SQLITE_WIN32_HAS_WIDE)
# define osIsNT()  (0)
#else
# define osIsNT()  ((sqlite3_os_type==2) || sqlite3_win32_is_nt())
#endif

/*
** This function determines if the machine is running a version of Windows
** based on the NT kernel.
*/
int sqlite3_win32_is_nt(void){
#if SQLITE_OS_WINRT
  /*
  ** NOTE: The WinRT sub-platform is always assumed to be based on the NT
  **       kernel.
  */
  return 1;
#elif SQLITE_WIN32_GETVERSIONEX
  if( osInterlockedCompareExchange(&sqlite3_os_type, 0, 0)==0 ){
#if defined(SQLITE_WIN32_HAS_ANSI)
    OSVERSIONINFOA sInfo;
    sInfo.dwOSVersionInfoSize = sizeof(sInfo);
    osGetVersionExA(&sInfo);
    osInterlockedCompareExchange(&sqlite3_os_type,
        (sInfo.dwPlatformId == VER_PLATFORM_WIN32_NT) ? 2 : 1, 0);
#elif defined(SQLITE_WIN32_HAS_WIDE)
    OSVERSIONINFOW sInfo;
    sInfo.dwOSVersionInfoSize = sizeof(sInfo);
    osGetVersionExW(&sInfo);
    osInterlockedCompareExchange(&sqlite3_os_type,
        (sInfo.dwPlatformId == VER_PLATFORM_WIN32_NT) ? 2 : 1, 0);
#endif
  }
  return osInterlockedCompareExchange(&sqlite3_os_type, 2, 2)==2;
#elif SQLITE_TEST
  return osInterlockedCompareExchange(&sqlite3_os_type, 2, 2)==2;
#else
  /*
  ** NOTE: All sub-platforms where the GetVersionEx[AW] functions are
  **       deprecated are always assumed to be based on the NT kernel.
  */
  return 1;
#endif
}

#ifdef SQLITE_WIN32_MALLOC
/*
** Allocate nBytes of memory.
*/
static void *winMemMalloc(int nBytes){
  HANDLE hHeap;
  void *p;

  winMemAssertMagic();
  hHeap = winMemGetHeap();
  assert( hHeap!=0 );
  assert( hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
  assert( osHeapValidate(hHeap, SQLITE_WIN32_HEAP_FLAGS, NULL) );
#endif
  assert( nBytes>=0 );
  p = osHeapAlloc(hHeap, SQLITE_WIN32_HEAP_FLAGS, (SIZE_T)nBytes);
  if( !p ){
    sqlite3_log(SQLITE_NOMEM, "failed to HeapAlloc %u bytes (%lu), heap=%p",
                nBytes, osGetLastError(), (void*)hHeap);
  }
  return p;
}

/*
** Free memory.
*/
static void winMemFree(void *pPrior){
  HANDLE hHeap;

  winMemAssertMagic();
  hHeap = winMemGetHeap();
  assert( hHeap!=0 );
  assert( hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
  assert( osHeapValidate(hHeap, SQLITE_WIN32_HEAP_FLAGS, pPrior) );
#endif
  if( !pPrior ) return; /* Passing NULL to HeapFree is undefined. */
  if( !osHeapFree(hHeap, SQLITE_WIN32_HEAP_FLAGS, pPrior) ){
    sqlite3_log(SQLITE_NOMEM, "failed to HeapFree block %p (%lu), heap=%p",
                pPrior, osGetLastError(), (void*)hHeap);
  }
}

/*
** Change the size of an existing memory allocation
*/
static void *winMemRealloc(void *pPrior, int nBytes){
  HANDLE hHeap;
  void *p;

  winMemAssertMagic();
  hHeap = winMemGetHeap();
  assert( hHeap!=0 );
  assert( hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
  assert( osHeapValidate(hHeap, SQLITE_WIN32_HEAP_FLAGS, pPrior) );
#endif
  assert( nBytes>=0 );
  if( !pPrior ){
    p = osHeapAlloc(hHeap, SQLITE_WIN32_HEAP_FLAGS, (SIZE_T)nBytes);
  }else{
    p = osHeapReAlloc(hHeap, SQLITE_WIN32_HEAP_FLAGS, pPrior, (SIZE_T)nBytes);
  }
  if( !p ){
    sqlite3_log(SQLITE_NOMEM, "failed to %s %u bytes (%lu), heap=%p",
                pPrior ? "HeapReAlloc" : "HeapAlloc", nBytes, osGetLastError(),
                (void*)hHeap);
  }
  return p;
}

/*
** Return the size of an outstanding allocation, in bytes.
*/
static int winMemSize(void *p){
  HANDLE hHeap;
  SIZE_T n;

  winMemAssertMagic();
  hHeap = winMemGetHeap();
  assert( hHeap!=0 );
  assert( hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
  assert( osHeapValidate(hHeap, SQLITE_WIN32_HEAP_FLAGS, p) );
#endif
  if( !p ) return 0;
  n = osHeapSize(hHeap, SQLITE_WIN32_HEAP_FLAGS, p);
  if( n==(SIZE_T)-1 ){
    sqlite3_log(SQLITE_NOMEM, "failed to HeapSize block %p (%lu), heap=%p",
                p, osGetLastError(), (void*)hHeap);
    return 0;
  }
  return (int)n;
}

/*
** Round up a request size to the next valid allocation size.
*/
static int winMemRoundup(int n){
  return n;
}

/*
** Initialize this module.
*/
static int winMemInit(void *pAppData){
  winMemData *pWinMemData = (winMemData *)pAppData;

  if( !pWinMemData ) return SQLITE_ERROR;
  assert( pWinMemData->magic1==WINMEM_MAGIC1 );
  assert( pWinMemData->magic2==WINMEM_MAGIC2 );

#if !SQLITE_OS_WINRT && SQLITE_WIN32_HEAP_CREATE
  if( !pWinMemData->hHeap ){
    DWORD dwInitialSize = SQLITE_WIN32_HEAP_INIT_SIZE;
    DWORD dwMaximumSize = (DWORD)sqlite3GlobalConfig.nHeap;
    if( dwMaximumSize==0 ){
      dwMaximumSize = SQLITE_WIN32_HEAP_MAX_SIZE;
    }else if( dwInitialSize>dwMaximumSize ){
      dwInitialSize = dwMaximumSize;
    }
    pWinMemData->hHeap = osHeapCreate(SQLITE_WIN32_HEAP_FLAGS,
                                      dwInitialSize, dwMaximumSize);
    if( !pWinMemData->hHeap ){
      sqlite3_log(SQLITE_NOMEM,
          "failed to HeapCreate (%lu), flags=%u, initSize=%lu, maxSize=%lu",
          osGetLastError(), SQLITE_WIN32_HEAP_FLAGS, dwInitialSize,
          dwMaximumSize);
      return SQLITE_NOMEM_BKPT;
    }
    pWinMemData->bOwned = TRUE;
    assert( pWinMemData->bOwned );
  }
#else
  pWinMemData->hHeap = osGetProcessHeap();
  if( !pWinMemData->hHeap ){
    sqlite3_log(SQLITE_NOMEM,
        "failed to GetProcessHeap (%lu)", osGetLastError());
    return SQLITE_NOMEM_BKPT;
  }
  pWinMemData->bOwned = FALSE;
  assert( !pWinMemData->bOwned );
#endif
  assert( pWinMemData->hHeap!=0 );
  assert( pWinMemData->hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
  assert( osHeapValidate(pWinMemData->hHeap, SQLITE_WIN32_HEAP_FLAGS, NULL) );
#endif
  return SQLITE_OK;
}

/*
** Deinitialize this module.
*/
static void winMemShutdown(void *pAppData){
  winMemData *pWinMemData = (winMemData *)pAppData;

  if( !pWinMemData ) return;
  assert( pWinMemData->magic1==WINMEM_MAGIC1 );
  assert( pWinMemData->magic2==WINMEM_MAGIC2 );

  if( pWinMemData->hHeap ){
    assert( pWinMemData->hHeap!=INVALID_HANDLE_VALUE );
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
    assert( osHeapValidate(pWinMemData->hHeap, SQLITE_WIN32_HEAP_FLAGS, NULL) );
#endif
    if( pWinMemData->bOwned ){
      if( !osHeapDestroy(pWinMemData->hHeap) ){
        sqlite3_log(SQLITE_NOMEM, "failed to HeapDestroy (%lu), heap=%p",
                    osGetLastError(), (void*)pWinMemData->hHeap);
      }
      pWinMemData->bOwned = FALSE;
    }
    pWinMemData->hHeap = NULL;
  }
}

/*
** Populate the low-level memory allocation function pointers in
** sqlite3GlobalConfig.m with pointers to the routines in this file. The
** arguments specify the block of memory to manage.
**
** This routine is only called by sqlite3_config(), and therefore
** is not required to be threadsafe (it is not).
*/
const sqlite3_mem_methods *sqlite3MemGetWin32(void){
  static const sqlite3_mem_methods winMemMethods = {
    winMemMalloc,
    winMemFree,
    winMemRealloc,
    winMemSize,
    winMemRoundup,
    winMemInit,
    winMemShutdown,
    &win_mem_data
  };
  return &winMemMethods;
}

void sqlite3MemSetDefault(void){
  sqlite3_config(SQLITE_CONFIG_MALLOC, sqlite3MemGetWin32());
}
#endif /* SQLITE_WIN32_MALLOC */

/*
** Convert a UTF-8 string to Microsoft Unicode.
**
** Space to hold the returned string is obtained from sqlite3_malloc().
*/
static LPWSTR winUtf8ToUnicode(const char *zText){
  int nChar;
  LPWSTR zWideText;

  nChar = osMultiByteToWideChar(CP_UTF8, 0, zText, -1, NULL, 0);
  if( nChar==0 ){
    return 0;
  }
  zWideText = sqlite3MallocZero( nChar*sizeof(WCHAR) );
  if( zWideText==0 ){
    return 0;
  }
  nChar = osMultiByteToWideChar(CP_UTF8, 0, zText, -1, zWideText,
                                nChar);
  if( nChar==0 ){
    sqlite3_free(zWideText);
    zWideText = 0;
  }
  return zWideText;
}

/*
** Convert a Microsoft Unicode string to UTF-8.
**
** Space to hold the returned string is obtained from sqlite3_malloc().
*/
static char *winUnicodeToUtf8(LPCWSTR zWideText){
  int nByte;
  char *zText;

  nByte = osWideCharToMultiByte(CP_UTF8, 0, zWideText, -1, 0, 0, 0, 0);
  if( nByte == 0 ){
    return 0;
  }
  zText = sqlite3MallocZero( nByte );
  if( zText==0 ){
    return 0;
  }
  nByte = osWideCharToMultiByte(CP_UTF8, 0, zWideText, -1, zText, nByte,
                                0, 0);
  if( nByte == 0 ){
    sqlite3_free(zText);
    zText = 0;
  }
  return zText;
}

/*
** Convert an ANSI string to Microsoft Unicode, using the ANSI or OEM
** code page.
**
** Space to hold the returned string is obtained from sqlite3_malloc().
*/
static LPWSTR winMbcsToUnicode(const char *zText, int useAnsi){
  int nByte;
  LPWSTR zMbcsText;
  int codepage = useAnsi ? CP_ACP : CP_OEMCP;

  nByte = osMultiByteToWideChar(codepage, 0, zText, -1, NULL,
                                0)*sizeof(WCHAR);
  if( nByte==0 ){
    return 0;
  }
  zMbcsText = sqlite3MallocZero( nByte*sizeof(WCHAR) );
  if( zMbcsText==0 ){
    return 0;
  }
  nByte = osMultiByteToWideChar(codepage, 0, zText, -1, zMbcsText,
                                nByte);
  if( nByte==0 ){
    sqlite3_free(zMbcsText);
    zMbcsText = 0;
  }
  return zMbcsText;
}

/*
** Convert a Microsoft Unicode string to a multi-byte character string,
** using the ANSI or OEM code page.
**
** Space to hold the returned string is obtained from sqlite3_malloc().
*/
static char *winUnicodeToMbcs(LPCWSTR zWideText, int useAnsi){
  int nByte;
  char *zText;
  int codepage = useAnsi ? CP_ACP : CP_OEMCP;

  nByte = osWideCharToMultiByte(codepage, 0, zWideText, -1, 0, 0, 0, 0);
  if( nByte == 0 ){
    return 0;
  }
  zText = sqlite3MallocZero( nByte );
  if( zText==0 ){
    return 0;
  }
  nByte = osWideCharToMultiByte(codepage, 0, zWideText, -1, zText,
                                nByte, 0, 0);
  if( nByte == 0 ){
    sqlite3_free(zText);
    zText = 0;
  }
  return zText;
}

/*
** Convert a multi-byte character string to UTF-8.
**
** Space to hold the returned string is obtained from sqlite3_malloc().
*/
static char *winMbcsToUtf8(const char *zText, int useAnsi){
  char *zTextUtf8;
  LPWSTR zTmpWide;

  zTmpWide = winMbcsToUnicode(zText, useAnsi);
  if( zTmpWide==0 ){
    return 0;
  }
  zTextUtf8 = winUnicodeToUtf8(zTmpWide);
  sqlite3_free(zTmpWide);
  return zTextUtf8;
}

/*
** Convert a UTF-8 string to a multi-byte character string.
**
** Space to hold the returned string is obtained from sqlite3_malloc().
*/
static char *winUtf8ToMbcs(const char *zText, int useAnsi){
  char *zTextMbcs;
  LPWSTR zTmpWide;

  zTmpWide = winUtf8ToUnicode(zText);
  if( zTmpWide==0 ){
    return 0;
  }
  zTextMbcs = winUnicodeToMbcs(zTmpWide, useAnsi);
  sqlite3_free(zTmpWide);
  return zTextMbcs;
}

/*
** This is a public wrapper for the winUtf8ToUnicode() function.
*/
LPWSTR sqlite3_win32_utf8_to_unicode(const char *zText){
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zText ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  return winUtf8ToUnicode(zText);
}

/*
** This is a public wrapper for the winUnicodeToUtf8() function.
*/
char *sqlite3_win32_unicode_to_utf8(LPCWSTR zWideText){
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zWideText ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  return winUnicodeToUtf8(zWideText);
}

/*
** This is a public wrapper for the winMbcsToUtf8() function.
*/
char *sqlite3_win32_mbcs_to_utf8(const char *zText){
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zText ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  return winMbcsToUtf8(zText, osAreFileApisANSI());
}

/*
** This is a public wrapper for the winMbcsToUtf8() function.
*/
char *sqlite3_win32_mbcs_to_utf8_v2(const char *zText, int useAnsi){
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zText ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  return winMbcsToUtf8(zText, useAnsi);
}

/*
** This is a public wrapper for the winUtf8ToMbcs() function.
*/
char *sqlite3_win32_utf8_to_mbcs(const char *zText){
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zText ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  return winUtf8ToMbcs(zText, osAreFileApisANSI());
}

/*
** This is a public wrapper for the winUtf8ToMbcs() function.
*/
char *sqlite3_win32_utf8_to_mbcs_v2(const char *zText, int useAnsi){
#ifdef SQLITE_ENABLE_API_ARMOR
  if( !zText ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  return winUtf8ToMbcs(zText, useAnsi);
}

/*
** This function is the same as sqlite3_win32_set_directory (below); however,
** it accepts a UTF-8 string.
*/
int sqlite3_win32_set_directory8(
  unsigned long type, /* Identifier for directory being set or reset */
  const char *zValue  /* New value for directory being set or reset */
){
  char **ppDirectory = 0;
  int rc;
#ifndef SQLITE_OMIT_AUTOINIT
  rc = sqlite3_initialize();
  if( rc ) return rc;
#endif
  sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR));
  if( type==SQLITE_WIN32_DATA_DIRECTORY_TYPE ){
    ppDirectory = &sqlite3_data_directory;
  }else if( type==SQLITE_WIN32_TEMP_DIRECTORY_TYPE ){
    ppDirectory = &sqlite3_temp_directory;
  }
  assert( !ppDirectory || type==SQLITE_WIN32_DATA_DIRECTORY_TYPE
          || type==SQLITE_WIN32_TEMP_DIRECTORY_TYPE
  );
  assert( !ppDirectory || sqlite3MemdebugHasType(*ppDirectory, MEMTYPE_HEAP) );
  if( ppDirectory ){
    char *zCopy = 0;
    if( zValue && zValue[0] ){
      zCopy = sqlite3_mprintf("%s", zValue);
      if ( zCopy==0 ){
        rc = SQLITE_NOMEM_BKPT;
        goto set_directory8_done;
      }
    }
    sqlite3_free(*ppDirectory);
    *ppDirectory = zCopy;
    rc = SQLITE_OK;
  }else{
    rc = SQLITE_ERROR;
  }
set_directory8_done:
  sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR));
  return rc;
}

/*
** This function is the same as sqlite3_win32_set_directory (below); however,
** it accepts a UTF-16 string.
*/
int sqlite3_win32_set_directory16(
  unsigned long type, /* Identifier for directory being set or reset */
  const void *zValue  /* New value for directory being set or reset */
){
  int rc;
  char *zUtf8 = 0;
  if( zValue ){
    zUtf8 = sqlite3_win32_unicode_to_utf8(zValue);
    if( zUtf8==0 ) return SQLITE_NOMEM_BKPT;
  }
  rc = sqlite3_win32_set_directory8(type, zUtf8);
  if( zUtf8 ) sqlite3_free(zUtf8);
  return rc;
}

/*
** This function sets the data directory or the temporary directory based on
** the provided arguments.  The type argument must be 1 in order to set the
** data directory or 2 in order to set the temporary directory.  The zValue
** argument is the name of the directory to use.  The return value will be
** SQLITE_OK if successful.
*/
int sqlite3_win32_set_directory(
  unsigned long type, /* Identifier for directory being set or reset */
  void *zValue        /* New value for directory being set or reset */
){
  return sqlite3_win32_set_directory16(type, zValue);
}

/*
** The return value of winGetLastErrorMsg
** is zero if the error message fits in the buffer, or non-zero
** otherwise (if the message was truncated).
*/
static int winGetLastErrorMsg(DWORD lastErrno, int nBuf, char *zBuf){
  /* FormatMessage returns 0 on failure.  Otherwise it
  ** returns the number of TCHARs written to the output
  ** buffer, excluding the terminating null char.
  */
  DWORD dwLen = 0;
  char *zOut = 0;

  if( osIsNT() ){
#if SQLITE_OS_WINRT
    WCHAR zTempWide[SQLITE_WIN32_MAX_ERRMSG_CHARS+1];
    dwLen = osFormatMessageW(FORMAT_MESSAGE_FROM_SYSTEM |
                             FORMAT_MESSAGE_IGNORE_INSERTS,
                             NULL,
                             lastErrno,
                             0,
                             zTempWide,
                             SQLITE_WIN32_MAX_ERRMSG_CHARS,
                             0);
#else
    LPWSTR zTempWide = NULL;
    dwLen = osFormatMessageW(FORMAT_MESSAGE_ALLOCATE_BUFFER |
                             FORMAT_MESSAGE_FROM_SYSTEM |
                             FORMAT_MESSAGE_IGNORE_INSERTS,
                             NULL,
                             lastErrno,
                             0,
                             (LPWSTR) &zTempWide,
                             0,
                             0);
#endif
    if( dwLen > 0 ){
      /* allocate a buffer and convert to UTF8 */
      sqlite3BeginBenignMalloc();
      zOut = winUnicodeToUtf8(zTempWide);
      sqlite3EndBenignMalloc();
#if !SQLITE_OS_WINRT
      /* free the system buffer allocated by FormatMessage */
      osLocalFree(zTempWide);
#endif
    }
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    char *zTemp = NULL;
    dwLen = osFormatMessageA(FORMAT_MESSAGE_ALLOCATE_BUFFER |
                             FORMAT_MESSAGE_FROM_SYSTEM |
                             FORMAT_MESSAGE_IGNORE_INSERTS,
                             NULL,
                             lastErrno,
                             0,
                             (LPSTR) &zTemp,
                             0,
                             0);
    if( dwLen > 0 ){
      /* allocate a buffer and convert to UTF8 */
      sqlite3BeginBenignMalloc();
      zOut = winMbcsToUtf8(zTemp, osAreFileApisANSI());
      sqlite3EndBenignMalloc();
      /* free the system buffer allocated by FormatMessage */
      osLocalFree(zTemp);
    }
  }
#endif
  if( 0 == dwLen ){
    sqlite3_snprintf(nBuf, zBuf, "OsError 0x%lx (%lu)", lastErrno, lastErrno);
  }else{
    /* copy a maximum of nBuf chars to output buffer */
    sqlite3_snprintf(nBuf, zBuf, "%s", zOut);
    /* free the UTF8 buffer */
    sqlite3_free(zOut);
  }
  return 0;
}

/*
**
** This function - winLogErrorAtLine() - is only ever called via the macro
** winLogError().
**
** This routine is invoked after an error occurs in an OS function.
** It logs a message using sqlite3_log() containing the current value of
** error code and, if possible, the human-readable equivalent from
** FormatMessage.
**
** The first argument passed to the macro should be the error code that
** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN).
** The two subsequent arguments should be the name of the OS function that
** failed and the associated file-system path, if any.
*/
#define winLogError(a,b,c,d)   winLogErrorAtLine(a,b,c,d,__LINE__)
static int winLogErrorAtLine(
  int errcode,                    /* SQLite error code */
  DWORD lastErrno,                /* Win32 last error */
  const char *zFunc,              /* Name of OS function that failed */
  const char *zPath,              /* File path associated with error */
  int iLine                       /* Source line number where error occurred */
){
  char zMsg[500];                 /* Human readable error text */
  int i;                          /* Loop counter */

  zMsg[0] = 0;
  winGetLastErrorMsg(lastErrno, sizeof(zMsg), zMsg);
  assert( errcode!=SQLITE_OK );
  if( zPath==0 ) zPath = "";
  for(i=0; zMsg[i] && zMsg[i]!='\r' && zMsg[i]!='\n'; i++){}
  zMsg[i] = 0;
  sqlite3_log(errcode,
      "os_win.c:%d: (%lu) %s(%s) - %s",
      iLine, lastErrno, zFunc, zPath, zMsg
  );

  return errcode;
}

/*
** The number of times that a ReadFile(), WriteFile(), and DeleteFile()
** will be retried following a locking error - probably caused by
** antivirus software.  Also the initial delay before the first retry.
** The delay increases linearly with each retry.
*/
#ifndef SQLITE_WIN32_IOERR_RETRY
# define SQLITE_WIN32_IOERR_RETRY 10
#endif
#ifndef SQLITE_WIN32_IOERR_RETRY_DELAY
# define SQLITE_WIN32_IOERR_RETRY_DELAY 25
#endif
static int winIoerrRetry = SQLITE_WIN32_IOERR_RETRY;
static int winIoerrRetryDelay = SQLITE_WIN32_IOERR_RETRY_DELAY;

/*
** The "winIoerrCanRetry1" macro is used to determine if a particular I/O
** error code obtained via GetLastError() is eligible to be retried.  It
** must accept the error code DWORD as its only argument and should return
** non-zero if the error code is transient in nature and the operation
** responsible for generating the original error might succeed upon being
** retried.  The argument to this macro should be a variable.
**
** Additionally, a macro named "winIoerrCanRetry2" may be defined.  If it
** is defined, it will be consulted only when the macro "winIoerrCanRetry1"
** returns zero.  The "winIoerrCanRetry2" macro is completely optional and
** may be used to include additional error codes in the set that should
** result in the failing I/O operation being retried by the caller.  If
** defined, the "winIoerrCanRetry2" macro must exhibit external semantics
** identical to those of the "winIoerrCanRetry1" macro.
*/
#if !defined(winIoerrCanRetry1)
#define winIoerrCanRetry1(a) (((a)==ERROR_ACCESS_DENIED)        || \
                              ((a)==ERROR_SHARING_VIOLATION)    || \
                              ((a)==ERROR_LOCK_VIOLATION)       || \
                              ((a)==ERROR_DEV_NOT_EXIST)        || \
                              ((a)==ERROR_NETNAME_DELETED)      || \
                              ((a)==ERROR_SEM_TIMEOUT)          || \
                              ((a)==ERROR_NETWORK_UNREACHABLE))
#endif

/*
** If a ReadFile() or WriteFile() error occurs, invoke this routine
** to see if it should be retried.  Return TRUE to retry.  Return FALSE
** to give up with an error.
*/
static int winRetryIoerr(int *pnRetry, DWORD *pError){
  DWORD e = osGetLastError();
  if( *pnRetry>=winIoerrRetry ){
    if( pError ){
      *pError = e;
    }
    return 0;
  }
  if( winIoerrCanRetry1(e) ){
    sqlite3_win32_sleep(winIoerrRetryDelay*(1+*pnRetry));
    ++*pnRetry;
    return 1;
  }
#if defined(winIoerrCanRetry2)
  else if( winIoerrCanRetry2(e) ){
    sqlite3_win32_sleep(winIoerrRetryDelay*(1+*pnRetry));
    ++*pnRetry;
    return 1;
  }
#endif
  if( pError ){
    *pError = e;
  }
  return 0;
}

/*
** Log a I/O error retry episode.
*/
static void winLogIoerr(int nRetry, int lineno){
  if( nRetry ){
    sqlite3_log(SQLITE_NOTICE,
      "delayed %dms for lock/sharing conflict at line %d",
      winIoerrRetryDelay*nRetry*(nRetry+1)/2, lineno
    );
  }
}

/*
** This #if does not rely on the SQLITE_OS_WINCE define because the
** corresponding section in "date.c" cannot use it.
*/
#if !defined(SQLITE_OMIT_LOCALTIME) && defined(_WIN32_WCE) && \
    (!defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API)
/*
** The MSVC CRT on Windows CE may not have a localtime() function.
** So define a substitute.
*/
#  include <time.h>
struct tm *__cdecl localtime(const time_t *t)
{
  static struct tm y;
  FILETIME uTm, lTm;
  SYSTEMTIME pTm;
  sqlite3_int64 t64;
  t64 = *t;
  t64 = (t64 + 11644473600)*10000000;
  uTm.dwLowDateTime = (DWORD)(t64 & 0xFFFFFFFF);
  uTm.dwHighDateTime= (DWORD)(t64 >> 32);
  osFileTimeToLocalFileTime(&uTm,&lTm);
  osFileTimeToSystemTime(&lTm,&pTm);
  y.tm_year = pTm.wYear - 1900;
  y.tm_mon = pTm.wMonth - 1;
  y.tm_wday = pTm.wDayOfWeek;
  y.tm_mday = pTm.wDay;
  y.tm_hour = pTm.wHour;
  y.tm_min = pTm.wMinute;
  y.tm_sec = pTm.wSecond;
  return &y;
}
#endif

#if SQLITE_OS_WINCE
/*************************************************************************
** This section contains code for WinCE only.
*/
#define HANDLE_TO_WINFILE(a) (winFile*)&((char*)a)[-(int)offsetof(winFile,h)]

/*
** Acquire a lock on the handle h
*/
static void winceMutexAcquire(HANDLE h){
   DWORD dwErr;
   do {
     dwErr = osWaitForSingleObject(h, INFINITE);
   } while (dwErr != WAIT_OBJECT_0 && dwErr != WAIT_ABANDONED);
}
/*
** Release a lock acquired by winceMutexAcquire()
*/
#define winceMutexRelease(h) ReleaseMutex(h)

/*
** Create the mutex and shared memory used for locking in the file
** descriptor pFile
*/
static int winceCreateLock(const char *zFilename, winFile *pFile){
  LPWSTR zTok;
  LPWSTR zName;
  DWORD lastErrno;
  BOOL bLogged = FALSE;
  BOOL bInit = TRUE;

  zName = winUtf8ToUnicode(zFilename);
  if( zName==0 ){
    /* out of memory */
    return SQLITE_IOERR_NOMEM_BKPT;
  }

  /* Initialize the local lockdata */
  memset(&pFile->local, 0, sizeof(pFile->local));

  /* Replace the backslashes from the filename and lowercase it
  ** to derive a mutex name. */
  zTok = osCharLowerW(zName);
  for (;*zTok;zTok++){
    if (*zTok == '\\') *zTok = '_';
  }

  /* Create/open the named mutex */
  pFile->hMutex = osCreateMutexW(NULL, FALSE, zName);
  if (!pFile->hMutex){
    pFile->lastErrno = osGetLastError();
    sqlite3_free(zName);
    return winLogError(SQLITE_IOERR, pFile->lastErrno,
                       "winceCreateLock1", zFilename);
  }

  /* Acquire the mutex before continuing */
  winceMutexAcquire(pFile->hMutex);

  /* Since the names of named mutexes, semaphores, file mappings etc are
  ** case-sensitive, take advantage of that by uppercasing the mutex name
  ** and using that as the shared filemapping name.
  */
  osCharUpperW(zName);
  pFile->hShared = osCreateFileMappingW(INVALID_HANDLE_VALUE, NULL,
                                        PAGE_READWRITE, 0, sizeof(winceLock),
                                        zName);

  /* Set a flag that indicates we're the first to create the memory so it
  ** must be zero-initialized */
  lastErrno = osGetLastError();
  if (lastErrno == ERROR_ALREADY_EXISTS){
    bInit = FALSE;
  }

  sqlite3_free(zName);

  /* If we succeeded in making the shared memory handle, map it. */
  if( pFile->hShared ){
    pFile->shared = (winceLock*)osMapViewOfFile(pFile->hShared,
             FILE_MAP_READ|FILE_MAP_WRITE, 0, 0, sizeof(winceLock));
    /* If mapping failed, close the shared memory handle and erase it */
    if( !pFile->shared ){
      pFile->lastErrno = osGetLastError();
      winLogError(SQLITE_IOERR, pFile->lastErrno,
                  "winceCreateLock2", zFilename);
      bLogged = TRUE;
      osCloseHandle(pFile->hShared);
      pFile->hShared = NULL;
    }
  }

  /* If shared memory could not be created, then close the mutex and fail */
  if( pFile->hShared==NULL ){
    if( !bLogged ){
      pFile->lastErrno = lastErrno;
      winLogError(SQLITE_IOERR, pFile->lastErrno,
                  "winceCreateLock3", zFilename);
      bLogged = TRUE;
    }
    winceMutexRelease(pFile->hMutex);
    osCloseHandle(pFile->hMutex);
    pFile->hMutex = NULL;
    return SQLITE_IOERR;
  }

  /* Initialize the shared memory if we're supposed to */
  if( bInit ){
    memset(pFile->shared, 0, sizeof(winceLock));
  }

  winceMutexRelease(pFile->hMutex);
  return SQLITE_OK;
}

/*
** Destroy the part of winFile that deals with wince locks
*/
static void winceDestroyLock(winFile *pFile){
  if (pFile->hMutex){
    /* Acquire the mutex */
    winceMutexAcquire(pFile->hMutex);

    /* The following blocks should probably assert in debug mode, but they
       are to cleanup in case any locks remained open */
    if (pFile->local.nReaders){
      pFile->shared->nReaders --;
    }
    if (pFile->local.bReserved){
      pFile->shared->bReserved = FALSE;
    }
    if (pFile->local.bPending){
      pFile->shared->bPending = FALSE;
    }
    if (pFile->local.bExclusive){
      pFile->shared->bExclusive = FALSE;
    }

    /* De-reference and close our copy of the shared memory handle */
    osUnmapViewOfFile(pFile->shared);
    osCloseHandle(pFile->hShared);

    /* Done with the mutex */
    winceMutexRelease(pFile->hMutex);
    osCloseHandle(pFile->hMutex);
    pFile->hMutex = NULL;
  }
}

/*
** An implementation of the LockFile() API of Windows for CE
*/
static BOOL winceLockFile(
  LPHANDLE phFile,
  DWORD dwFileOffsetLow,
  DWORD dwFileOffsetHigh,
  DWORD nNumberOfBytesToLockLow,
  DWORD nNumberOfBytesToLockHigh
){
  winFile *pFile = HANDLE_TO_WINFILE(phFile);
  BOOL bReturn = FALSE;

  UNUSED_PARAMETER(dwFileOffsetHigh);
  UNUSED_PARAMETER(nNumberOfBytesToLockHigh);

  if (!pFile->hMutex) return TRUE;
  winceMutexAcquire(pFile->hMutex);

  /* Wanting an exclusive lock? */
  if (dwFileOffsetLow == (DWORD)SHARED_FIRST
       && nNumberOfBytesToLockLow == (DWORD)SHARED_SIZE){
    if (pFile->shared->nReaders == 0 && pFile->shared->bExclusive == 0){
       pFile->shared->bExclusive = TRUE;
       pFile->local.bExclusive = TRUE;
       bReturn = TRUE;
    }
  }

  /* Want a read-only lock? */
  else if (dwFileOffsetLow == (DWORD)SHARED_FIRST &&
           nNumberOfBytesToLockLow == 1){
    if (pFile->shared->bExclusive == 0){
      pFile->local.nReaders ++;
      if (pFile->local.nReaders == 1){
        pFile->shared->nReaders ++;
      }
      bReturn = TRUE;
    }
  }

  /* Want a pending lock? */
  else if (dwFileOffsetLow == (DWORD)PENDING_BYTE
           && nNumberOfBytesToLockLow == 1){
    /* If no pending lock has been acquired, then acquire it */
    if (pFile->shared->bPending == 0) {
      pFile->shared->bPending = TRUE;
      pFile->local.bPending = TRUE;
      bReturn = TRUE;
    }
  }

  /* Want a reserved lock? */
  else if (dwFileOffsetLow == (DWORD)RESERVED_BYTE
           && nNumberOfBytesToLockLow == 1){
    if (pFile->shared->bReserved == 0) {
      pFile->shared->bReserved = TRUE;
      pFile->local.bReserved = TRUE;
      bReturn = TRUE;
    }
  }

  winceMutexRelease(pFile->hMutex);
  return bReturn;
}

/*
** An implementation of the UnlockFile API of Windows for CE
*/
static BOOL winceUnlockFile(
  LPHANDLE phFile,
  DWORD dwFileOffsetLow,
  DWORD dwFileOffsetHigh,
  DWORD nNumberOfBytesToUnlockLow,
  DWORD nNumberOfBytesToUnlockHigh
){
  winFile *pFile = HANDLE_TO_WINFILE(phFile);
  BOOL bReturn = FALSE;

  UNUSED_PARAMETER(dwFileOffsetHigh);
  UNUSED_PARAMETER(nNumberOfBytesToUnlockHigh);

  if (!pFile->hMutex) return TRUE;
  winceMutexAcquire(pFile->hMutex);

  /* Releasing a reader lock or an exclusive lock */
  if (dwFileOffsetLow == (DWORD)SHARED_FIRST){
    /* Did we have an exclusive lock? */
    if (pFile->local.bExclusive){
      assert(nNumberOfBytesToUnlockLow == (DWORD)SHARED_SIZE);
      pFile->local.bExclusive = FALSE;
      pFile->shared->bExclusive = FALSE;
      bReturn = TRUE;
    }

    /* Did we just have a reader lock? */
    else if (pFile->local.nReaders){
      assert(nNumberOfBytesToUnlockLow == (DWORD)SHARED_SIZE
             || nNumberOfBytesToUnlockLow == 1);
      pFile->local.nReaders --;
      if (pFile->local.nReaders == 0)
      {
        pFile->shared->nReaders --;
      }
      bReturn = TRUE;
    }
  }

  /* Releasing a pending lock */
  else if (dwFileOffsetLow == (DWORD)PENDING_BYTE
           && nNumberOfBytesToUnlockLow == 1){
    if (pFile->local.bPending){
      pFile->local.bPending = FALSE;
      pFile->shared->bPending = FALSE;
      bReturn = TRUE;
    }
  }
  /* Releasing a reserved lock */
  else if (dwFileOffsetLow == (DWORD)RESERVED_BYTE
           && nNumberOfBytesToUnlockLow == 1){
    if (pFile->local.bReserved) {
      pFile->local.bReserved = FALSE;
      pFile->shared->bReserved = FALSE;
      bReturn = TRUE;
    }
  }

  winceMutexRelease(pFile->hMutex);
  return bReturn;
}
/*
** End of the special code for wince
*****************************************************************************/
#endif /* SQLITE_OS_WINCE */

/*
** Lock a file region.
*/
static BOOL winLockFile(
  LPHANDLE phFile,
  DWORD flags,
  DWORD offsetLow,
  DWORD offsetHigh,
  DWORD numBytesLow,
  DWORD numBytesHigh
){
#if SQLITE_OS_WINCE
  /*
  ** NOTE: Windows CE is handled differently here due its lack of the Win32
  **       API LockFile.
  */
  return winceLockFile(phFile, offsetLow, offsetHigh,
                       numBytesLow, numBytesHigh);
#else
  if( osIsNT() ){
    OVERLAPPED ovlp;
    memset(&ovlp, 0, sizeof(OVERLAPPED));
    ovlp.Offset = offsetLow;
    ovlp.OffsetHigh = offsetHigh;
    return osLockFileEx(*phFile, flags, 0, numBytesLow, numBytesHigh, &ovlp);
  }else{
    return osLockFile(*phFile, offsetLow, offsetHigh, numBytesLow,
                      numBytesHigh);
  }
#endif
}

/*
** Unlock a file region.
 */
static BOOL winUnlockFile(
  LPHANDLE phFile,
  DWORD offsetLow,
  DWORD offsetHigh,
  DWORD numBytesLow,
  DWORD numBytesHigh
){
#if SQLITE_OS_WINCE
  /*
  ** NOTE: Windows CE is handled differently here due its lack of the Win32
  **       API UnlockFile.
  */
  return winceUnlockFile(phFile, offsetLow, offsetHigh,
                         numBytesLow, numBytesHigh);
#else
  if( osIsNT() ){
    OVERLAPPED ovlp;
    memset(&ovlp, 0, sizeof(OVERLAPPED));
    ovlp.Offset = offsetLow;
    ovlp.OffsetHigh = offsetHigh;
    return osUnlockFileEx(*phFile, 0, numBytesLow, numBytesHigh, &ovlp);
  }else{
    return osUnlockFile(*phFile, offsetLow, offsetHigh, numBytesLow,
                        numBytesHigh);
  }
#endif
}

/*****************************************************************************
** The next group of routines implement the I/O methods specified
** by the sqlite3_io_methods object.
******************************************************************************/

/*
** Some Microsoft compilers lack this definition.
*/
#ifndef INVALID_SET_FILE_POINTER
# define INVALID_SET_FILE_POINTER ((DWORD)-1)
#endif

/*
** Move the current position of the file handle passed as the first
** argument to offset iOffset within the file. If successful, return 0.
** Otherwise, set pFile->lastErrno and return non-zero.
*/
static int winSeekFile(winFile *pFile, sqlite3_int64 iOffset){
#if !SQLITE_OS_WINRT
  LONG upperBits;                 /* Most sig. 32 bits of new offset */
  LONG lowerBits;                 /* Least sig. 32 bits of new offset */
  DWORD dwRet;                    /* Value returned by SetFilePointer() */
  DWORD lastErrno;                /* Value returned by GetLastError() */

  OSTRACE(("SEEK file=%p, offset=%lld\n", pFile->h, iOffset));

  upperBits = (LONG)((iOffset>>32) & 0x7fffffff);
  lowerBits = (LONG)(iOffset & 0xffffffff);

  /* API oddity: If successful, SetFilePointer() returns a dword
  ** containing the lower 32-bits of the new file-offset. Or, if it fails,
  ** it returns INVALID_SET_FILE_POINTER. However according to MSDN,
  ** INVALID_SET_FILE_POINTER may also be a valid new offset. So to determine
  ** whether an error has actually occurred, it is also necessary to call
  ** GetLastError().
  */
  dwRet = osSetFilePointer(pFile->h, lowerBits, &upperBits, FILE_BEGIN);

  if( (dwRet==INVALID_SET_FILE_POINTER
      && ((lastErrno = osGetLastError())!=NO_ERROR)) ){
    pFile->lastErrno = lastErrno;
    winLogError(SQLITE_IOERR_SEEK, pFile->lastErrno,
                "winSeekFile", pFile->zPath);
    OSTRACE(("SEEK file=%p, rc=SQLITE_IOERR_SEEK\n", pFile->h));
    return 1;
  }

  OSTRACE(("SEEK file=%p, rc=SQLITE_OK\n", pFile->h));
  return 0;
#else
  /*
  ** Same as above, except that this implementation works for WinRT.
  */

  LARGE_INTEGER x;                /* The new offset */
  BOOL bRet;                      /* Value returned by SetFilePointerEx() */

  x.QuadPart = iOffset;
  bRet = osSetFilePointerEx(pFile->h, x, 0, FILE_BEGIN);

  if(!bRet){
    pFile->lastErrno = osGetLastError();
    winLogError(SQLITE_IOERR_SEEK, pFile->lastErrno,
                "winSeekFile", pFile->zPath);
    OSTRACE(("SEEK file=%p, rc=SQLITE_IOERR_SEEK\n", pFile->h));
    return 1;
  }

  OSTRACE(("SEEK file=%p, rc=SQLITE_OK\n", pFile->h));
  return 0;
#endif
}

#if SQLITE_MAX_MMAP_SIZE>0
/* Forward references to VFS helper methods used for memory mapped files */
static int winMapfile(winFile*, sqlite3_int64);
static int winUnmapfile(winFile*);
#endif

/*
** Close a file.
**
** It is reported that an attempt to close a handle might sometimes
** fail.  This is a very unreasonable result, but Windows is notorious
** for being unreasonable so I do not doubt that it might happen.  If
** the close fails, we pause for 100 milliseconds and try again.  As
** many as MX_CLOSE_ATTEMPT attempts to close the handle are made before
** giving up and returning an error.
*/
#define MX_CLOSE_ATTEMPT 3
static int winClose(sqlite3_file *id){
  int rc, cnt = 0;
  winFile *pFile = (winFile*)id;

  assert( id!=0 );
#ifndef SQLITE_OMIT_WAL
  assert( pFile->pShm==0 );
#endif
  assert( pFile->h!=NULL && pFile->h!=INVALID_HANDLE_VALUE );
  OSTRACE(("CLOSE pid=%lu, pFile=%p, file=%p\n",
           osGetCurrentProcessId(), pFile, pFile->h));

#if SQLITE_MAX_MMAP_SIZE>0
  winUnmapfile(pFile);
#endif

  do{
    rc = osCloseHandle(pFile->h);
    /* SimulateIOError( rc=0; cnt=MX_CLOSE_ATTEMPT; ); */
  }while( rc==0 && ++cnt < MX_CLOSE_ATTEMPT && (sqlite3_win32_sleep(100), 1) );
#if SQLITE_OS_WINCE
#define WINCE_DELETION_ATTEMPTS 3
  {
    winVfsAppData *pAppData = (winVfsAppData*)pFile->pVfs->pAppData;
    if( pAppData==NULL || !pAppData->bNoLock ){
      winceDestroyLock(pFile);
    }
  }
  if( pFile->zDeleteOnClose ){
    int cnt = 0;
    while(
           osDeleteFileW(pFile->zDeleteOnClose)==0
        && osGetFileAttributesW(pFile->zDeleteOnClose)!=0xffffffff
        && cnt++ < WINCE_DELETION_ATTEMPTS
    ){
       sqlite3_win32_sleep(100);  /* Wait a little before trying again */
    }
    sqlite3_free(pFile->zDeleteOnClose);
  }
#endif
  if( rc ){
    pFile->h = NULL;
  }
  OpenCounter(-1);
  OSTRACE(("CLOSE pid=%lu, pFile=%p, file=%p, rc=%s\n",
           osGetCurrentProcessId(), pFile, pFile->h, rc ? "ok" : "failed"));
  return rc ? SQLITE_OK
            : winLogError(SQLITE_IOERR_CLOSE, osGetLastError(),
                          "winClose", pFile->zPath);
}

/*
** Read data from a file into a buffer.  Return SQLITE_OK if all
** bytes were read successfully and SQLITE_IOERR if anything goes
** wrong.
*/
static int winRead(
  sqlite3_file *id,          /* File to read from */
  void *pBuf,                /* Write content into this buffer */
  int amt,                   /* Number of bytes to read */
  sqlite3_int64 offset       /* Begin reading at this offset */
){
#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
  OVERLAPPED overlapped;          /* The offset for ReadFile. */
#endif
  winFile *pFile = (winFile*)id;  /* file handle */
  DWORD nRead;                    /* Number of bytes actually read from file */
  int nRetry = 0;                 /* Number of retrys */

  assert( id!=0 );
  assert( amt>0 );
  assert( offset>=0 );
  SimulateIOError(return SQLITE_IOERR_READ);
  OSTRACE(("READ pid=%lu, pFile=%p, file=%p, buffer=%p, amount=%d, "
           "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile,
           pFile->h, pBuf, amt, offset, pFile->locktype));

#if SQLITE_MAX_MMAP_SIZE>0
  /* Deal with as much of this read request as possible by transferring
  ** data from the memory mapping using memcpy().  */
  if( offset<pFile->mmapSize ){
    if( offset+amt <= pFile->mmapSize ){
      memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], amt);
      OSTRACE(("READ-MMAP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
               osGetCurrentProcessId(), pFile, pFile->h));
      return SQLITE_OK;
    }else{
      int nCopy = (int)(pFile->mmapSize - offset);
      memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], nCopy);
      pBuf = &((u8 *)pBuf)[nCopy];
      amt -= nCopy;
      offset += nCopy;
    }
  }
#endif

#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
  if( winSeekFile(pFile, offset) ){
    OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_FULL\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return SQLITE_FULL;
  }
  while( !osReadFile(pFile->h, pBuf, amt, &nRead, 0) ){
#else
  memset(&overlapped, 0, sizeof(OVERLAPPED));
  overlapped.Offset = (LONG)(offset & 0xffffffff);
  overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff);
  while( !osReadFile(pFile->h, pBuf, amt, &nRead, &overlapped) &&
         osGetLastError()!=ERROR_HANDLE_EOF ){
#endif
    DWORD lastErrno;
    if( winRetryIoerr(&nRetry, &lastErrno) ) continue;
    pFile->lastErrno = lastErrno;
    OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_READ\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return winLogError(SQLITE_IOERR_READ, pFile->lastErrno,
                       "winRead", pFile->zPath);
  }
  winLogIoerr(nRetry, __LINE__);
  if( nRead<(DWORD)amt ){
    /* Unread parts of the buffer must be zero-filled */
    memset(&((char*)pBuf)[nRead], 0, amt-nRead);
    OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_SHORT_READ\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return SQLITE_IOERR_SHORT_READ;
  }

  OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile, pFile->h));
  return SQLITE_OK;
}

/*
** Write data from a buffer into a file.  Return SQLITE_OK on success
** or some other error code on failure.
*/
static int winWrite(
  sqlite3_file *id,               /* File to write into */
  const void *pBuf,               /* The bytes to be written */
  int amt,                        /* Number of bytes to write */
  sqlite3_int64 offset            /* Offset into the file to begin writing at */
){
  int rc = 0;                     /* True if error has occurred, else false */
  winFile *pFile = (winFile*)id;  /* File handle */
  int nRetry = 0;                 /* Number of retries */

  assert( amt>0 );
  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_WRITE);
  SimulateDiskfullError(return SQLITE_FULL);

  OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, buffer=%p, amount=%d, "
           "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile,
           pFile->h, pBuf, amt, offset, pFile->locktype));

#if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
  /* Deal with as much of this write request as possible by transferring
  ** data from the memory mapping using memcpy().  */
  if( offset<pFile->mmapSize ){
    if( offset+amt <= pFile->mmapSize ){
      memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, amt);
      OSTRACE(("WRITE-MMAP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
               osGetCurrentProcessId(), pFile, pFile->h));
      return SQLITE_OK;
    }else{
      int nCopy = (int)(pFile->mmapSize - offset);
      memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, nCopy);
      pBuf = &((u8 *)pBuf)[nCopy];
      amt -= nCopy;
      offset += nCopy;
    }
  }
#endif

#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
  rc = winSeekFile(pFile, offset);
  if( rc==0 ){
#else
  {
#endif
#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
    OVERLAPPED overlapped;        /* The offset for WriteFile. */
#endif
    u8 *aRem = (u8 *)pBuf;        /* Data yet to be written */
    int nRem = amt;               /* Number of bytes yet to be written */
    DWORD nWrite;                 /* Bytes written by each WriteFile() call */
    DWORD lastErrno = NO_ERROR;   /* Value returned by GetLastError() */

#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
    memset(&overlapped, 0, sizeof(OVERLAPPED));
    overlapped.Offset = (LONG)(offset & 0xffffffff);
    overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff);
#endif

    while( nRem>0 ){
#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
      if( !osWriteFile(pFile->h, aRem, nRem, &nWrite, 0) ){
#else
      if( !osWriteFile(pFile->h, aRem, nRem, &nWrite, &overlapped) ){
#endif
        if( winRetryIoerr(&nRetry, &lastErrno) ) continue;
        break;
      }
      assert( nWrite==0 || nWrite<=(DWORD)nRem );
      if( nWrite==0 || nWrite>(DWORD)nRem ){
        lastErrno = osGetLastError();
        break;
      }
#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
      offset += nWrite;
      overlapped.Offset = (LONG)(offset & 0xffffffff);
      overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff);
#endif
      aRem += nWrite;
      nRem -= nWrite;
    }
    if( nRem>0 ){
      pFile->lastErrno = lastErrno;
      rc = 1;
    }
  }

  if( rc ){
    if(   ( pFile->lastErrno==ERROR_HANDLE_DISK_FULL )
       || ( pFile->lastErrno==ERROR_DISK_FULL )){
      OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_FULL\n",
               osGetCurrentProcessId(), pFile, pFile->h));
      return winLogError(SQLITE_FULL, pFile->lastErrno,
                         "winWrite1", pFile->zPath);
    }
    OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_WRITE\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return winLogError(SQLITE_IOERR_WRITE, pFile->lastErrno,
                       "winWrite2", pFile->zPath);
  }else{
    winLogIoerr(nRetry, __LINE__);
  }
  OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile, pFile->h));
  return SQLITE_OK;
}

/*
** Truncate an open file to a specified size
*/
static int winTruncate(sqlite3_file *id, sqlite3_int64 nByte){
  winFile *pFile = (winFile*)id;  /* File handle object */
  int rc = SQLITE_OK;             /* Return code for this function */
  DWORD lastErrno;
#if SQLITE_MAX_MMAP_SIZE>0
  sqlite3_int64 oldMmapSize;
  if( pFile->nFetchOut>0 ){
    /* File truncation is a no-op if there are outstanding memory mapped
    ** pages.  This is because truncating the file means temporarily unmapping
    ** the file, and that might delete memory out from under existing cursors.
    **
    ** This can result in incremental vacuum not truncating the file,
    ** if there is an active read cursor when the incremental vacuum occurs.
    ** No real harm comes of this - the database file is not corrupted,
    ** though some folks might complain that the file is bigger than it
    ** needs to be.
    **
    ** The only feasible work-around is to defer the truncation until after
    ** all references to memory-mapped content are closed.  That is doable,
    ** but involves adding a few branches in the common write code path which
    ** could slow down normal operations slightly.  Hence, we have decided for
    ** now to simply make transactions a no-op if there are pending reads.  We
    ** can maybe revisit this decision in the future.
    */
    return SQLITE_OK;
  }
#endif

  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_TRUNCATE);
  OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, size=%lld, lock=%d\n",
           osGetCurrentProcessId(), pFile, pFile->h, nByte, pFile->locktype));

  /* If the user has configured a chunk-size for this file, truncate the
  ** file so that it consists of an integer number of chunks (i.e. the
  ** actual file size after the operation may be larger than the requested
  ** size).
  */
  if( pFile->szChunk>0 ){
    nByte = ((nByte + pFile->szChunk - 1)/pFile->szChunk) * pFile->szChunk;
  }

#if SQLITE_MAX_MMAP_SIZE>0
  if( pFile->pMapRegion ){
    oldMmapSize = pFile->mmapSize;
  }else{
    oldMmapSize = 0;
  }
  winUnmapfile(pFile);
#endif

  /* SetEndOfFile() returns non-zero when successful, or zero when it fails. */
  if( winSeekFile(pFile, nByte) ){
    rc = winLogError(SQLITE_IOERR_TRUNCATE, pFile->lastErrno,
                     "winTruncate1", pFile->zPath);
  }else if( 0==osSetEndOfFile(pFile->h) &&
            ((lastErrno = osGetLastError())!=ERROR_USER_MAPPED_FILE) ){
    pFile->lastErrno = lastErrno;
    rc = winLogError(SQLITE_IOERR_TRUNCATE, pFile->lastErrno,
                     "winTruncate2", pFile->zPath);
  }

#if SQLITE_MAX_MMAP_SIZE>0
  if( rc==SQLITE_OK && oldMmapSize>0 ){
    if( oldMmapSize>nByte ){
      winMapfile(pFile, -1);
    }else{
      winMapfile(pFile, oldMmapSize);
    }
  }
#endif

  OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, rc=%s\n",
           osGetCurrentProcessId(), pFile, pFile->h, sqlite3ErrName(rc)));
  return rc;
}

#ifdef SQLITE_TEST
/*
** Count the number of fullsyncs and normal syncs.  This is used to test
** that syncs and fullsyncs are occurring at the right times.
*/
int sqlite3_sync_count = 0;
int sqlite3_fullsync_count = 0;
#endif

/*
** Make sure all writes to a particular file are committed to disk.
*/
static int winSync(sqlite3_file *id, int flags){
#ifndef SQLITE_NO_SYNC
  /*
  ** Used only when SQLITE_NO_SYNC is not defined.
   */
  BOOL rc;
#endif
#if !defined(NDEBUG) || !defined(SQLITE_NO_SYNC) || \
    defined(SQLITE_HAVE_OS_TRACE)
  /*
  ** Used when SQLITE_NO_SYNC is not defined and by the assert() and/or
  ** OSTRACE() macros.
   */
  winFile *pFile = (winFile*)id;
#else
  UNUSED_PARAMETER(id);
#endif

  assert( pFile );
  /* Check that one of SQLITE_SYNC_NORMAL or FULL was passed */
  assert((flags&0x0F)==SQLITE_SYNC_NORMAL
      || (flags&0x0F)==SQLITE_SYNC_FULL
  );

  /* Unix cannot, but some systems may return SQLITE_FULL from here. This
  ** line is to test that doing so does not cause any problems.
  */
  SimulateDiskfullError( return SQLITE_FULL );

  OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, flags=%x, lock=%d\n",
           osGetCurrentProcessId(), pFile, pFile->h, flags,
           pFile->locktype));

#ifndef SQLITE_TEST
  UNUSED_PARAMETER(flags);
#else
  if( (flags&0x0F)==SQLITE_SYNC_FULL ){
    sqlite3_fullsync_count++;
  }
  sqlite3_sync_count++;
#endif

  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
  ** no-op
  */
#ifdef SQLITE_NO_SYNC
  OSTRACE(("SYNC-NOP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile, pFile->h));
  return SQLITE_OK;
#else
#if SQLITE_MAX_MMAP_SIZE>0
  if( pFile->pMapRegion ){
    if( osFlushViewOfFile(pFile->pMapRegion, 0) ){
      OSTRACE(("SYNC-MMAP pid=%lu, pFile=%p, pMapRegion=%p, "
               "rc=SQLITE_OK\n", osGetCurrentProcessId(),
               pFile, pFile->pMapRegion));
    }else{
      pFile->lastErrno = osGetLastError();
      OSTRACE(("SYNC-MMAP pid=%lu, pFile=%p, pMapRegion=%p, "
               "rc=SQLITE_IOERR_MMAP\n", osGetCurrentProcessId(),
               pFile, pFile->pMapRegion));
      return winLogError(SQLITE_IOERR_MMAP, pFile->lastErrno,
                         "winSync1", pFile->zPath);
    }
  }
#endif
  rc = osFlushFileBuffers(pFile->h);
  SimulateIOError( rc=FALSE );
  if( rc ){
    OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return SQLITE_OK;
  }else{
    pFile->lastErrno = osGetLastError();
    OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_FSYNC\n",
             osGetCurrentProcessId(), pFile, pFile->h));
    return winLogError(SQLITE_IOERR_FSYNC, pFile->lastErrno,
                       "winSync2", pFile->zPath);
  }
#endif
}

/*
** Determine the current size of a file in bytes
*/
static int winFileSize(sqlite3_file *id, sqlite3_int64 *pSize){
  winFile *pFile = (winFile*)id;
  int rc = SQLITE_OK;

  assert( id!=0 );
  assert( pSize!=0 );
  SimulateIOError(return SQLITE_IOERR_FSTAT);
  OSTRACE(("SIZE file=%p, pSize=%p\n", pFile->h, pSize));

#if SQLITE_OS_WINRT
  {
    FILE_STANDARD_INFO info;
    if( osGetFileInformationByHandleEx(pFile->h, FileStandardInfo,
                                     &info, sizeof(info)) ){
      *pSize = info.EndOfFile.QuadPart;
    }else{
      pFile->lastErrno = osGetLastError();
      rc = winLogError(SQLITE_IOERR_FSTAT, pFile->lastErrno,
                       "winFileSize", pFile->zPath);
    }
  }
#else
  {
    DWORD upperBits;
    DWORD lowerBits;
    DWORD lastErrno;

    lowerBits = osGetFileSize(pFile->h, &upperBits);
    *pSize = (((sqlite3_int64)upperBits)<<32) + lowerBits;
    if(   (lowerBits == INVALID_FILE_SIZE)
       && ((lastErrno = osGetLastError())!=NO_ERROR) ){
      pFile->lastErrno = lastErrno;
      rc = winLogError(SQLITE_IOERR_FSTAT, pFile->lastErrno,
                       "winFileSize", pFile->zPath);
    }
  }
#endif
  OSTRACE(("SIZE file=%p, pSize=%p, *pSize=%lld, rc=%s\n",
           pFile->h, pSize, *pSize, sqlite3ErrName(rc)));
  return rc;
}

/*
** LOCKFILE_FAIL_IMMEDIATELY is undefined on some Windows systems.
*/
#ifndef LOCKFILE_FAIL_IMMEDIATELY
# define LOCKFILE_FAIL_IMMEDIATELY 1
#endif

#ifndef LOCKFILE_EXCLUSIVE_LOCK
# define LOCKFILE_EXCLUSIVE_LOCK 2
#endif

/*
** Historically, SQLite has used both the LockFile and LockFileEx functions.
** When the LockFile function was used, it was always expected to fail
** immediately if the lock could not be obtained.  Also, it always expected to
** obtain an exclusive lock.  These flags are used with the LockFileEx function
** and reflect those expectations; therefore, they should not be changed.
*/
#ifndef SQLITE_LOCKFILE_FLAGS
# define SQLITE_LOCKFILE_FLAGS   (LOCKFILE_FAIL_IMMEDIATELY | \
                                  LOCKFILE_EXCLUSIVE_LOCK)
#endif

/*
** Currently, SQLite never calls the LockFileEx function without wanting the
** call to fail immediately if the lock cannot be obtained.
*/
#ifndef SQLITE_LOCKFILEEX_FLAGS
# define SQLITE_LOCKFILEEX_FLAGS (LOCKFILE_FAIL_IMMEDIATELY)
#endif

/*
** Acquire a reader lock.
** Different API routines are called depending on whether or not this
** is Win9x or WinNT.
*/
static int winGetReadLock(winFile *pFile){
  int res;
  OSTRACE(("READ-LOCK file=%p, lock=%d\n", pFile->h, pFile->locktype));
  if( osIsNT() ){
#if SQLITE_OS_WINCE
    /*
    ** NOTE: Windows CE is handled differently here due its lack of the Win32
    **       API LockFileEx.
    */
    res = winceLockFile(&pFile->h, SHARED_FIRST, 0, 1, 0);
#else
    res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS, SHARED_FIRST, 0,
                      SHARED_SIZE, 0);
#endif
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    int lk;
    sqlite3_randomness(sizeof(lk), &lk);
    pFile->sharedLockByte = (short)((lk & 0x7fffffff)%(SHARED_SIZE - 1));
    res = winLockFile(&pFile->h, SQLITE_LOCKFILE_FLAGS,
                      SHARED_FIRST+pFile->sharedLockByte, 0, 1, 0);
  }
#endif
  if( res == 0 ){
    pFile->lastErrno = osGetLastError();
    /* No need to log a failure to lock */
  }
  OSTRACE(("READ-LOCK file=%p, result=%d\n", pFile->h, res));
  return res;
}

/*
** Undo a readlock
*/
static int winUnlockReadLock(winFile *pFile){
  int res;
  DWORD lastErrno;
  OSTRACE(("READ-UNLOCK file=%p, lock=%d\n", pFile->h, pFile->locktype));
  if( osIsNT() ){
    res = winUnlockFile(&pFile->h, SHARED_FIRST, 0, SHARED_SIZE, 0);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    res = winUnlockFile(&pFile->h, SHARED_FIRST+pFile->sharedLockByte, 0, 1, 0);
  }
#endif
  if( res==0 && ((lastErrno = osGetLastError())!=ERROR_NOT_LOCKED) ){
    pFile->lastErrno = lastErrno;
    winLogError(SQLITE_IOERR_UNLOCK, pFile->lastErrno,
                "winUnlockReadLock", pFile->zPath);
  }
  OSTRACE(("READ-UNLOCK file=%p, result=%d\n", pFile->h, res));
  return res;
}

/*
** Lock the file with the lock specified by parameter locktype - one
** of the following:
**
**     (1) SHARED_LOCK
**     (2) RESERVED_LOCK
**     (3) PENDING_LOCK
**     (4) EXCLUSIVE_LOCK
**
** Sometimes when requesting one lock state, additional lock states
** are inserted in between.  The locking might fail on one of the later
** transitions leaving the lock state different from what it started but
** still short of its goal.  The following chart shows the allowed
** transitions and the inserted intermediate states:
**
**    UNLOCKED -> SHARED
**    SHARED -> RESERVED
**    SHARED -> (PENDING) -> EXCLUSIVE
**    RESERVED -> (PENDING) -> EXCLUSIVE
**    PENDING -> EXCLUSIVE
**
** This routine will only increase a lock.  The winUnlock() routine
** erases all locks at once and returns us immediately to locking level 0.
** It is not possible to lower the locking level one step at a time.  You
** must go straight to locking level 0.
*/
static int winLock(sqlite3_file *id, int locktype){
  int rc = SQLITE_OK;    /* Return code from subroutines */
  int res = 1;           /* Result of a Windows lock call */
  int newLocktype;       /* Set pFile->locktype to this value before exiting */
  int gotPendingLock = 0;/* True if we acquired a PENDING lock this time */
  winFile *pFile = (winFile*)id;
  DWORD lastErrno = NO_ERROR;

  assert( id!=0 );
  OSTRACE(("LOCK file=%p, oldLock=%d(%d), newLock=%d\n",
           pFile->h, pFile->locktype, pFile->sharedLockByte, locktype));

  /* If there is already a lock of this type or more restrictive on the
  ** OsFile, do nothing. Don't use the end_lock: exit path, as
  ** sqlite3OsEnterMutex() hasn't been called yet.
  */
  if( pFile->locktype>=locktype ){
    OSTRACE(("LOCK-HELD file=%p, rc=SQLITE_OK\n", pFile->h));
    return SQLITE_OK;
  }

  /* Do not allow any kind of write-lock on a read-only database
  */
  if( (pFile->ctrlFlags & WINFILE_RDONLY)!=0 && locktype>=RESERVED_LOCK ){
    return SQLITE_IOERR_LOCK;
  }

  /* Make sure the locking sequence is correct
  */
  assert( pFile->locktype!=NO_LOCK || locktype==SHARED_LOCK );
  assert( locktype!=PENDING_LOCK );
  assert( locktype!=RESERVED_LOCK || pFile->locktype==SHARED_LOCK );

  /* Lock the PENDING_LOCK byte if we need to acquire a PENDING lock or
  ** a SHARED lock.  If we are acquiring a SHARED lock, the acquisition of
  ** the PENDING_LOCK byte is temporary.
  */
  newLocktype = pFile->locktype;
  if( pFile->locktype==NO_LOCK
   || (locktype==EXCLUSIVE_LOCK && pFile->locktype<=RESERVED_LOCK)
  ){
    int cnt = 3;
    while( cnt-->0 && (res = winLockFile(&pFile->h, SQLITE_LOCKFILE_FLAGS,
                                         PENDING_BYTE, 0, 1, 0))==0 ){
      /* Try 3 times to get the pending lock.  This is needed to work
      ** around problems caused by indexing and/or anti-virus software on
      ** Windows systems.
      ** If you are using this code as a model for alternative VFSes, do not
      ** copy this retry logic.  It is a hack intended for Windows only.
      */
      lastErrno = osGetLastError();
      OSTRACE(("LOCK-PENDING-FAIL file=%p, count=%d, result=%d\n",
               pFile->h, cnt, res));
      if( lastErrno==ERROR_INVALID_HANDLE ){
        pFile->lastErrno = lastErrno;
        rc = SQLITE_IOERR_LOCK;
        OSTRACE(("LOCK-FAIL file=%p, count=%d, rc=%s\n",
                 pFile->h, cnt, sqlite3ErrName(rc)));
        return rc;
      }
      if( cnt ) sqlite3_win32_sleep(1);
    }
    gotPendingLock = res;
    if( !res ){
      lastErrno = osGetLastError();
    }
  }

  /* Acquire a shared lock
  */
  if( locktype==SHARED_LOCK && res ){
    assert( pFile->locktype==NO_LOCK );
    res = winGetReadLock(pFile);
    if( res ){
      newLocktype = SHARED_LOCK;
    }else{
      lastErrno = osGetLastError();
    }
  }

  /* Acquire a RESERVED lock
  */
  if( locktype==RESERVED_LOCK && res ){
    assert( pFile->locktype==SHARED_LOCK );
    res = winLockFile(&pFile->h, SQLITE_LOCKFILE_FLAGS, RESERVED_BYTE, 0, 1, 0);
    if( res ){
      newLocktype = RESERVED_LOCK;
    }else{
      lastErrno = osGetLastError();
    }
  }

  /* Acquire a PENDING lock
  */
  if( locktype==EXCLUSIVE_LOCK && res ){
    newLocktype = PENDING_LOCK;
    gotPendingLock = 0;
  }

  /* Acquire an EXCLUSIVE lock
  */
  if( locktype==EXCLUSIVE_LOCK && res ){
    assert( pFile->locktype>=SHARED_LOCK );
    (void)winUnlockReadLock(pFile);
    res = winLockFile(&pFile->h, SQLITE_LOCKFILE_FLAGS, SHARED_FIRST, 0,
                      SHARED_SIZE, 0);
    if( res ){
      newLocktype = EXCLUSIVE_LOCK;
    }else{
      lastErrno = osGetLastError();
      winGetReadLock(pFile);
    }
  }

  /* If we are holding a PENDING lock that ought to be released, then
  ** release it now.
  */
  if( gotPendingLock && locktype==SHARED_LOCK ){
    winUnlockFile(&pFile->h, PENDING_BYTE, 0, 1, 0);
  }

  /* Update the state of the lock has held in the file descriptor then
  ** return the appropriate result code.
  */
  if( res ){
    rc = SQLITE_OK;
  }else{
    pFile->lastErrno = lastErrno;
    rc = SQLITE_BUSY;
    OSTRACE(("LOCK-FAIL file=%p, wanted=%d, got=%d\n",
             pFile->h, locktype, newLocktype));
  }
  pFile->locktype = (u8)newLocktype;
  OSTRACE(("LOCK file=%p, lock=%d, rc=%s\n",
           pFile->h, pFile->locktype, sqlite3ErrName(rc)));
  return rc;
}

/*
** This routine checks if there is a RESERVED lock held on the specified
** file by this or any other process. If such a lock is held, return
** non-zero, otherwise zero.
*/
static int winCheckReservedLock(sqlite3_file *id, int *pResOut){
  int res;
  winFile *pFile = (winFile*)id;

  SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
  OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p\n", pFile->h, pResOut));

  assert( id!=0 );
  if( pFile->locktype>=RESERVED_LOCK ){
    res = 1;
    OSTRACE(("TEST-WR-LOCK file=%p, result=%d (local)\n", pFile->h, res));
  }else{
    res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE,0,1,0);
    if( res ){
      winUnlockFile(&pFile->h, RESERVED_BYTE, 0, 1, 0);
    }
    res = !res;
    OSTRACE(("TEST-WR-LOCK file=%p, result=%d (remote)\n", pFile->h, res));
  }
  *pResOut = res;
  OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n",
           pFile->h, pResOut, *pResOut));
  return SQLITE_OK;
}

/*
** Lower the locking level on file descriptor id to locktype.  locktype
** must be either NO_LOCK or SHARED_LOCK.
**
** If the locking level of the file descriptor is already at or below
** the requested locking level, this routine is a no-op.
**
** It is not possible for this routine to fail if the second argument
** is NO_LOCK.  If the second argument is SHARED_LOCK then this routine
** might return SQLITE_IOERR;
*/
static int winUnlock(sqlite3_file *id, int locktype){
  int type;
  winFile *pFile = (winFile*)id;
  int rc = SQLITE_OK;
  assert( pFile!=0 );
  assert( locktype<=SHARED_LOCK );
  OSTRACE(("UNLOCK file=%p, oldLock=%d(%d), newLock=%d\n",
           pFile->h, pFile->locktype, pFile->sharedLockByte, locktype));
  type = pFile->locktype;
  if( type>=EXCLUSIVE_LOCK ){
    winUnlockFile(&pFile->h, SHARED_FIRST, 0, SHARED_SIZE, 0);
    if( locktype==SHARED_LOCK && !winGetReadLock(pFile) ){
      /* This should never happen.  We should always be able to
      ** reacquire the read lock */
      rc = winLogError(SQLITE_IOERR_UNLOCK, osGetLastError(),
                       "winUnlock", pFile->zPath);
    }
  }
  if( type>=RESERVED_LOCK ){
    winUnlockFile(&pFile->h, RESERVED_BYTE, 0, 1, 0);
  }
  if( locktype==NO_LOCK && type>=SHARED_LOCK ){
    winUnlockReadLock(pFile);
  }
  if( type>=PENDING_LOCK ){
    winUnlockFile(&pFile->h, PENDING_BYTE, 0, 1, 0);
  }
  pFile->locktype = (u8)locktype;
  OSTRACE(("UNLOCK file=%p, lock=%d, rc=%s\n",
           pFile->h, pFile->locktype, sqlite3ErrName(rc)));
  return rc;
}

/******************************************************************************
****************************** No-op Locking **********************************
**
** Of the various locking implementations available, this is by far the
** simplest:  locking is ignored.  No attempt is made to lock the database
** file for reading or writing.
**
** This locking mode is appropriate for use on read-only databases
** (ex: databases that are burned into CD-ROM, for example.)  It can
** also be used if the application employs some external mechanism to
** prevent simultaneous access of the same database by two or more
** database connections.  But there is a serious risk of database
** corruption if this locking mode is used in situations where multiple
** database connections are accessing the same database file at the same
** time and one or more of those connections are writing.
*/

static int winNolockLock(sqlite3_file *id, int locktype){
  UNUSED_PARAMETER(id);
  UNUSED_PARAMETER(locktype);
  return SQLITE_OK;
}

static int winNolockCheckReservedLock(sqlite3_file *id, int *pResOut){
  UNUSED_PARAMETER(id);
  UNUSED_PARAMETER(pResOut);
  return SQLITE_OK;
}

static int winNolockUnlock(sqlite3_file *id, int locktype){
  UNUSED_PARAMETER(id);
  UNUSED_PARAMETER(locktype);
  return SQLITE_OK;
}

/******************* End of the no-op lock implementation *********************
******************************************************************************/

/*
** If *pArg is initially negative then this is a query.  Set *pArg to
** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set.
**
** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags.
*/
static void winModeBit(winFile *pFile, unsigned char mask, int *pArg){
  if( *pArg<0 ){
    *pArg = (pFile->ctrlFlags & mask)!=0;
  }else if( (*pArg)==0 ){
    pFile->ctrlFlags &= ~mask;
  }else{
    pFile->ctrlFlags |= mask;
  }
}

/* Forward references to VFS helper methods used for temporary files */
static int winGetTempname(sqlite3_vfs *, char **);
static int winIsDir(const void *);
static BOOL winIsLongPathPrefix(const char *);
static BOOL winIsDriveLetterAndColon(const char *);

/*
** Control and query of the open file handle.
*/
static int winFileControl(sqlite3_file *id, int op, void *pArg){
  winFile *pFile = (winFile*)id;
  OSTRACE(("FCNTL file=%p, op=%d, pArg=%p\n", pFile->h, op, pArg));
  switch( op ){
    case SQLITE_FCNTL_LOCKSTATE: {
      *(int*)pArg = pFile->locktype;
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_LAST_ERRNO: {
      *(int*)pArg = (int)pFile->lastErrno;
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_CHUNK_SIZE: {
      pFile->szChunk = *(int *)pArg;
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_SIZE_HINT: {
      if( pFile->szChunk>0 ){
        sqlite3_int64 oldSz;
        int rc = winFileSize(id, &oldSz);
        if( rc==SQLITE_OK ){
          sqlite3_int64 newSz = *(sqlite3_int64*)pArg;
          if( newSz>oldSz ){
            SimulateIOErrorBenign(1);
            rc = winTruncate(id, newSz);
            SimulateIOErrorBenign(0);
          }
        }
        OSTRACE(("FCNTL file=%p, rc=%s\n", pFile->h, sqlite3ErrName(rc)));
        return rc;
      }
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_PERSIST_WAL: {
      winModeBit(pFile, WINFILE_PERSIST_WAL, (int*)pArg);
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_POWERSAFE_OVERWRITE: {
      winModeBit(pFile, WINFILE_PSOW, (int*)pArg);
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_VFSNAME: {
      *(char**)pArg = sqlite3_mprintf("%s", pFile->pVfs->zName);
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_WIN32_AV_RETRY: {
      int *a = (int*)pArg;
      if( a[0]>0 ){
        winIoerrRetry = a[0];
      }else{
        a[0] = winIoerrRetry;
      }
      if( a[1]>0 ){
        winIoerrRetryDelay = a[1];
      }else{
        a[1] = winIoerrRetryDelay;
      }
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_WIN32_GET_HANDLE: {
      LPHANDLE phFile = (LPHANDLE)pArg;
      *phFile = pFile->h;
      OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
      return SQLITE_OK;
    }
#ifdef SQLITE_TEST
    case SQLITE_FCNTL_WIN32_SET_HANDLE: {
      LPHANDLE phFile = (LPHANDLE)pArg;
      HANDLE hOldFile = pFile->h;
      pFile->h = *phFile;
      *phFile = hOldFile;
      OSTRACE(("FCNTL oldFile=%p, newFile=%p, rc=SQLITE_OK\n",
               hOldFile, pFile->h));
      return SQLITE_OK;
    }
#endif
    case SQLITE_FCNTL_TEMPFILENAME: {
      char *zTFile = 0;
      int rc = winGetTempname(pFile->pVfs, &zTFile);
      if( rc==SQLITE_OK ){
        *(char**)pArg = zTFile;
      }
      OSTRACE(("FCNTL file=%p, rc=%s\n", pFile->h, sqlite3ErrName(rc)));
      return rc;
    }
#if SQLITE_MAX_MMAP_SIZE>0
    case SQLITE_FCNTL_MMAP_SIZE: {
      i64 newLimit = *(i64*)pArg;
      int rc = SQLITE_OK;
      if( newLimit>sqlite3GlobalConfig.mxMmap ){
        newLimit = sqlite3GlobalConfig.mxMmap;
      }

      /* The value of newLimit may be eventually cast to (SIZE_T) and passed
      ** to MapViewOfFile(). Restrict its value to 2GB if (SIZE_T) is not at
      ** least a 64-bit type. */
      if( newLimit>0 && sizeof(SIZE_T)<8 ){
        newLimit = (newLimit & 0x7FFFFFFF);
      }

      *(i64*)pArg = pFile->mmapSizeMax;
      if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){
        pFile->mmapSizeMax = newLimit;
        if( pFile->mmapSize>0 ){
          winUnmapfile(pFile);
          rc = winMapfile(pFile, -1);
        }
      }
      OSTRACE(("FCNTL file=%p, rc=%s\n", pFile->h, sqlite3ErrName(rc)));
      return rc;
    }
#endif
  }
  OSTRACE(("FCNTL file=%p, rc=SQLITE_NOTFOUND\n", pFile->h));
  return SQLITE_NOTFOUND;
}

/*
** Return the sector size in bytes of the underlying block device for
** the specified file. This is almost always 512 bytes, but may be
** larger for some devices.
**
** SQLite code assumes this function cannot fail. It also assumes that
** if two files are created in the same file-system directory (i.e.
** a database and its journal file) that the sector size will be the
** same for both.
*/
static int winSectorSize(sqlite3_file *id){
  (void)id;
  return SQLITE_DEFAULT_SECTOR_SIZE;
}

/*
** Return a vector of device characteristics.
*/
static int winDeviceCharacteristics(sqlite3_file *id){
  winFile *p = (winFile*)id;
  return SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN |
         ((p->ctrlFlags & WINFILE_PSOW)?SQLITE_IOCAP_POWERSAFE_OVERWRITE:0);
}

/*
** Windows will only let you create file view mappings
** on allocation size granularity boundaries.
** During sqlite3_os_init() we do a GetSystemInfo()
** to get the granularity size.
*/
static SYSTEM_INFO winSysInfo;

#ifndef SQLITE_OMIT_WAL

/*
** Helper functions to obtain and relinquish the global mutex. The
** global mutex is used to protect the winLockInfo objects used by
** this file, all of which may be shared by multiple threads.
**
** Function winShmMutexHeld() is used to assert() that the global mutex
** is held when required. This function is only used as part of assert()
** statements. e.g.
**
**   winShmEnterMutex()
**     assert( winShmMutexHeld() );
**   winShmLeaveMutex()
*/
static sqlite3_mutex *winBigLock = 0;
static void winShmEnterMutex(void){
  sqlite3_mutex_enter(winBigLock);
}
static void winShmLeaveMutex(void){
  sqlite3_mutex_leave(winBigLock);
}
#ifndef NDEBUG
static int winShmMutexHeld(void) {
  return sqlite3_mutex_held(winBigLock);
}
#endif

/*
** Object used to represent a single file opened and mmapped to provide
** shared memory.  When multiple threads all reference the same
** log-summary, each thread has its own winFile object, but they all
** point to a single instance of this object.  In other words, each
** log-summary is opened only once per process.
**
** winShmMutexHeld() must be true when creating or destroying
** this object or while reading or writing the following fields:
**
**      nRef
**      pNext
**
** The following fields are read-only after the object is created:
**
**      fid
**      zFilename
**
** Either winShmNode.mutex must be held or winShmNode.nRef==0 and
** winShmMutexHeld() is true when reading or writing any other field
** in this structure.
**
*/
struct winShmNode {
  sqlite3_mutex *mutex;      /* Mutex to access this object */
  char *zFilename;           /* Name of the file */
  winFile hFile;             /* File handle from winOpen */

  int szRegion;              /* Size of shared-memory regions */
  int nRegion;               /* Size of array apRegion */
  u8 isReadonly;             /* True if read-only */
  u8 isUnlocked;             /* True if no DMS lock held */

  struct ShmRegion {
    HANDLE hMap;             /* File handle from CreateFileMapping */
    void *pMap;
  } *aRegion;
  DWORD lastErrno;           /* The Windows errno from the last I/O error */

  int nRef;                  /* Number of winShm objects pointing to this */
  winShm *pFirst;            /* All winShm objects pointing to this */
  winShmNode *pNext;         /* Next in list of all winShmNode objects */
#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
  u8 nextShmId;              /* Next available winShm.id value */
#endif
};

/*
** A global array of all winShmNode objects.
**
** The winShmMutexHeld() must be true while reading or writing this list.
*/
static winShmNode *winShmNodeList = 0;

/*
** Structure used internally by this VFS to record the state of an
** open shared memory connection.
**
** The following fields are initialized when this object is created and
** are read-only thereafter:
**
**    winShm.pShmNode
**    winShm.id
**
** All other fields are read/write.  The winShm.pShmNode->mutex must be held
** while accessing any read/write fields.
*/
struct winShm {
  winShmNode *pShmNode;      /* The underlying winShmNode object */
  winShm *pNext;             /* Next winShm with the same winShmNode */
  u8 hasMutex;               /* True if holding the winShmNode mutex */
  u16 sharedMask;            /* Mask of shared locks held */
  u16 exclMask;              /* Mask of exclusive locks held */
#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
  u8 id;                     /* Id of this connection with its winShmNode */
#endif
};

/*
** Constants used for locking
*/
#define WIN_SHM_BASE   ((22+SQLITE_SHM_NLOCK)*4)        /* first lock byte */
#define WIN_SHM_DMS    (WIN_SHM_BASE+SQLITE_SHM_NLOCK)  /* deadman switch */

/*
** Apply advisory locks for all n bytes beginning at ofst.
*/
#define WINSHM_UNLCK  1
#define WINSHM_RDLCK  2
#define WINSHM_WRLCK  3
static int winShmSystemLock(
  winShmNode *pFile,    /* Apply locks to this open shared-memory segment */
  int lockType,         /* WINSHM_UNLCK, WINSHM_RDLCK, or WINSHM_WRLCK */
  int ofst,             /* Offset to first byte to be locked/unlocked */
  int nByte             /* Number of bytes to lock or unlock */
){
  int rc = 0;           /* Result code form Lock/UnlockFileEx() */

  /* Access to the winShmNode object is serialized by the caller */
  assert( pFile->nRef==0 || sqlite3_mutex_held(pFile->mutex) );

  OSTRACE(("SHM-LOCK file=%p, lock=%d, offset=%d, size=%d\n",
           pFile->hFile.h, lockType, ofst, nByte));

  /* Release/Acquire the system-level lock */
  if( lockType==WINSHM_UNLCK ){
    rc = winUnlockFile(&pFile->hFile.h, ofst, 0, nByte, 0);
  }else{
    /* Initialize the locking parameters */
    DWORD dwFlags = LOCKFILE_FAIL_IMMEDIATELY;
    if( lockType == WINSHM_WRLCK ) dwFlags |= LOCKFILE_EXCLUSIVE_LOCK;
    rc = winLockFile(&pFile->hFile.h, dwFlags, ofst, 0, nByte, 0);
  }

  if( rc!= 0 ){
    rc = SQLITE_OK;
  }else{
    pFile->lastErrno =  osGetLastError();
    rc = SQLITE_BUSY;
  }

  OSTRACE(("SHM-LOCK file=%p, func=%s, errno=%lu, rc=%s\n",
           pFile->hFile.h, (lockType == WINSHM_UNLCK) ? "winUnlockFile" :
           "winLockFile", pFile->lastErrno, sqlite3ErrName(rc)));

  return rc;
}

/* Forward references to VFS methods */
static int winOpen(sqlite3_vfs*,const char*,sqlite3_file*,int,int*);
static int winDelete(sqlite3_vfs *,const char*,int);

/*
** Purge the winShmNodeList list of all entries with winShmNode.nRef==0.
**
** This is not a VFS shared-memory method; it is a utility function called
** by VFS shared-memory methods.
*/
static void winShmPurge(sqlite3_vfs *pVfs, int deleteFlag){
  winShmNode **pp;
  winShmNode *p;
  assert( winShmMutexHeld() );
  OSTRACE(("SHM-PURGE pid=%lu, deleteFlag=%d\n",
           osGetCurrentProcessId(), deleteFlag));
  pp = &winShmNodeList;
  while( (p = *pp)!=0 ){
    if( p->nRef==0 ){
      int i;
      if( p->mutex ){ sqlite3_mutex_free(p->mutex); }
      for(i=0; i<p->nRegion; i++){
        BOOL bRc = osUnmapViewOfFile(p->aRegion[i].pMap);
        OSTRACE(("SHM-PURGE-UNMAP pid=%lu, region=%d, rc=%s\n",
                 osGetCurrentProcessId(), i, bRc ? "ok" : "failed"));
        UNUSED_VARIABLE_VALUE(bRc);
        bRc = osCloseHandle(p->aRegion[i].hMap);
        OSTRACE(("SHM-PURGE-CLOSE pid=%lu, region=%d, rc=%s\n",
                 osGetCurrentProcessId(), i, bRc ? "ok" : "failed"));
        UNUSED_VARIABLE_VALUE(bRc);
      }
      if( p->hFile.h!=NULL && p->hFile.h!=INVALID_HANDLE_VALUE ){
        SimulateIOErrorBenign(1);
        winClose((sqlite3_file *)&p->hFile);
        SimulateIOErrorBenign(0);
      }
      if( deleteFlag ){
        SimulateIOErrorBenign(1);
        sqlite3BeginBenignMalloc();
        winDelete(pVfs, p->zFilename, 0);
        sqlite3EndBenignMalloc();
        SimulateIOErrorBenign(0);
      }
      *pp = p->pNext;
      sqlite3_free(p->aRegion);
      sqlite3_free(p);
    }else{
      pp = &p->pNext;
    }
  }
}

/*
** The DMS lock has not yet been taken on shm file pShmNode. Attempt to
** take it now. Return SQLITE_OK if successful, or an SQLite error
** code otherwise.
**
** If the DMS cannot be locked because this is a readonly_shm=1
** connection and no other process already holds a lock, return
** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1.
*/
static int winLockSharedMemory(winShmNode *pShmNode){
  int rc = winShmSystemLock(pShmNode, WINSHM_WRLCK, WIN_SHM_DMS, 1);

  if( rc==SQLITE_OK ){
    if( pShmNode->isReadonly ){
      pShmNode->isUnlocked = 1;
      winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
      return SQLITE_READONLY_CANTINIT;
    }else if( winTruncate((sqlite3_file*)&pShmNode->hFile, 0) ){
      winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
      return winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(),
                         "winLockSharedMemory", pShmNode->zFilename);
    }
  }

  if( rc==SQLITE_OK ){
    winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
  }

  return winShmSystemLock(pShmNode, WINSHM_RDLCK, WIN_SHM_DMS, 1);
}

/*
** Open the shared-memory area associated with database file pDbFd.
**
** When opening a new shared-memory file, if no other instances of that
** file are currently open, in this process or in other processes, then
** the file must be truncated to zero length or have its header cleared.
*/
static int winOpenSharedMemory(winFile *pDbFd){
  struct winShm *p;                  /* The connection to be opened */
  winShmNode *pShmNode = 0;          /* The underlying mmapped file */
  int rc = SQLITE_OK;                /* Result code */
  winShmNode *pNew;                  /* Newly allocated winShmNode */
  int nName;                         /* Size of zName in bytes */

  assert( pDbFd->pShm==0 );    /* Not previously opened */

  /* Allocate space for the new sqlite3_shm object.  Also speculatively
  ** allocate space for a new winShmNode and filename.
  */
  p = sqlite3MallocZero( sizeof(*p) );
  if( p==0 ) return SQLITE_IOERR_NOMEM_BKPT;
  nName = sqlite3Strlen30(pDbFd->zPath);
  pNew = sqlite3MallocZero( sizeof(*pShmNode) + nName + 17 );
  if( pNew==0 ){
    sqlite3_free(p);
    return SQLITE_IOERR_NOMEM_BKPT;
  }
  pNew->zFilename = (char*)&pNew[1];
  sqlite3_snprintf(nName+15, pNew->zFilename, "%s-shm", pDbFd->zPath);
  sqlite3FileSuffix3(pDbFd->zPath, pNew->zFilename);

  /* Look to see if there is an existing winShmNode that can be used.
  ** If no matching winShmNode currently exists, create a new one.
  */
  winShmEnterMutex();
  for(pShmNode = winShmNodeList; pShmNode; pShmNode=pShmNode->pNext){
    /* TBD need to come up with better match here.  Perhaps
    ** use FILE_ID_BOTH_DIR_INFO Structure.
    */
    if( sqlite3StrICmp(pShmNode->zFilename, pNew->zFilename)==0 ) break;
  }
  if( pShmNode ){
    sqlite3_free(pNew);
  }else{
    int inFlags = SQLITE_OPEN_WAL;
    int outFlags = 0;

    pShmNode = pNew;
    pNew = 0;
    ((winFile*)(&pShmNode->hFile))->h = INVALID_HANDLE_VALUE;
    pShmNode->pNext = winShmNodeList;
    winShmNodeList = pShmNode;

    if( sqlite3GlobalConfig.bCoreMutex ){
      pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
      if( pShmNode->mutex==0 ){
        rc = SQLITE_IOERR_NOMEM_BKPT;
        goto shm_open_err;
      }
    }

    if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){
      inFlags |= SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE;
    }else{
      inFlags |= SQLITE_OPEN_READONLY;
    }
    rc = winOpen(pDbFd->pVfs, pShmNode->zFilename,
                 (sqlite3_file*)&pShmNode->hFile,
                 inFlags, &outFlags);
    if( rc!=SQLITE_OK ){
      rc = winLogError(rc, osGetLastError(), "winOpenShm",
                       pShmNode->zFilename);
      goto shm_open_err;
    }
    if( outFlags==SQLITE_OPEN_READONLY ) pShmNode->isReadonly = 1;

    rc = winLockSharedMemory(pShmNode);
    if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err;
  }

  /* Make the new connection a child of the winShmNode */
  p->pShmNode = pShmNode;
#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
  p->id = pShmNode->nextShmId++;
#endif
  pShmNode->nRef++;
  pDbFd->pShm = p;
  winShmLeaveMutex();

  /* The reference count on pShmNode has already been incremented under
  ** the cover of the winShmEnterMutex() mutex and the pointer from the
  ** new (struct winShm) object to the pShmNode has been set. All that is
  ** left to do is to link the new object into the linked list starting
  ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex
  ** mutex.
  */
  sqlite3_mutex_enter(pShmNode->mutex);
  p->pNext = pShmNode->pFirst;
  pShmNode->pFirst = p;
  sqlite3_mutex_leave(pShmNode->mutex);
  return rc;

  /* Jump here on any error */
shm_open_err:
  winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
  winShmPurge(pDbFd->pVfs, 0);      /* This call frees pShmNode if required */
  sqlite3_free(p);
  sqlite3_free(pNew);
  winShmLeaveMutex();
  return rc;
}

/*
** Close a connection to shared-memory.  Delete the underlying
** storage if deleteFlag is true.
*/
static int winShmUnmap(
  sqlite3_file *fd,          /* Database holding shared memory */
  int deleteFlag             /* Delete after closing if true */
){
  winFile *pDbFd;       /* Database holding shared-memory */
  winShm *p;            /* The connection to be closed */
  winShmNode *pShmNode; /* The underlying shared-memory file */
  winShm **pp;          /* For looping over sibling connections */

  pDbFd = (winFile*)fd;
  p = pDbFd->pShm;
  if( p==0 ) return SQLITE_OK;
  pShmNode = p->pShmNode;

  /* Remove connection p from the set of connections associated
  ** with pShmNode */
  sqlite3_mutex_enter(pShmNode->mutex);
  for(pp=&pShmNode->pFirst; (*pp)!=p; pp = &(*pp)->pNext){}
  *pp = p->pNext;

  /* Free the connection p */
  sqlite3_free(p);
  pDbFd->pShm = 0;
  sqlite3_mutex_leave(pShmNode->mutex);

  /* If pShmNode->nRef has reached 0, then close the underlying
  ** shared-memory file, too */
  winShmEnterMutex();
  assert( pShmNode->nRef>0 );
  pShmNode->nRef--;
  if( pShmNode->nRef==0 ){
    winShmPurge(pDbFd->pVfs, deleteFlag);
  }
  winShmLeaveMutex();

  return SQLITE_OK;
}

/*
** Change the lock state for a shared-memory segment.
*/
static int winShmLock(
  sqlite3_file *fd,          /* Database file holding the shared memory */
  int ofst,                  /* First lock to acquire or release */
  int n,                     /* Number of locks to acquire or release */
  int flags                  /* What to do with the lock */
){
  winFile *pDbFd = (winFile*)fd;        /* Connection holding shared memory */
  winShm *p = pDbFd->pShm;              /* The shared memory being locked */
  winShm *pX;                           /* For looping over all siblings */
  winShmNode *pShmNode;
  int rc = SQLITE_OK;                   /* Result code */
  u16 mask;                             /* Mask of locks to take or release */

  if( p==0 ) return SQLITE_IOERR_SHMLOCK;
  pShmNode = p->pShmNode;
  if( NEVER(pShmNode==0) ) return SQLITE_IOERR_SHMLOCK;

  assert( ofst>=0 && ofst+n<=SQLITE_SHM_NLOCK );
  assert( n>=1 );
  assert( flags==(SQLITE_SHM_LOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) );
  assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 );

  mask = (u16)((1U<<(ofst+n)) - (1U<<ofst));
  assert( n>1 || mask==(1<<ofst) );
  sqlite3_mutex_enter(pShmNode->mutex);
  if( flags & SQLITE_SHM_UNLOCK ){
    u16 allMask = 0; /* Mask of locks held by siblings */

    /* See if any siblings hold this same lock */
    for(pX=pShmNode->pFirst; pX; pX=pX->pNext){
      if( pX==p ) continue;
      assert( (pX->exclMask & (p->exclMask|p->sharedMask))==0 );
      allMask |= pX->sharedMask;
    }

    /* Unlock the system-level locks */
    if( (mask & allMask)==0 ){
      rc = winShmSystemLock(pShmNode, WINSHM_UNLCK, ofst+WIN_SHM_BASE, n);
    }else{
      rc = SQLITE_OK;
    }

    /* Undo the local locks */
    if( rc==SQLITE_OK ){
      p->exclMask &= ~mask;
      p->sharedMask &= ~mask;
    }
  }else if( flags & SQLITE_SHM_SHARED ){
    u16 allShared = 0;  /* Union of locks held by connections other than "p" */

    /* Find out which shared locks are already held by sibling connections.
    ** If any sibling already holds an exclusive lock, go ahead and return
    ** SQLITE_BUSY.
    */
    for(pX=pShmNode->pFirst; pX; pX=pX->pNext){
      if( (pX->exclMask & mask)!=0 ){
        rc = SQLITE_BUSY;
        break;
      }
      allShared |= pX->sharedMask;
    }

    /* Get shared locks at the system level, if necessary */
    if( rc==SQLITE_OK ){
      if( (allShared & mask)==0 ){
        rc = winShmSystemLock(pShmNode, WINSHM_RDLCK, ofst+WIN_SHM_BASE, n);
      }else{
        rc = SQLITE_OK;
      }
    }

    /* Get the local shared locks */
    if( rc==SQLITE_OK ){
      p->sharedMask |= mask;
    }
  }else{
    /* Make sure no sibling connections hold locks that will block this
    ** lock.  If any do, return SQLITE_BUSY right away.
    */
    for(pX=pShmNode->pFirst; pX; pX=pX->pNext){
      if( (pX->exclMask & mask)!=0 || (pX->sharedMask & mask)!=0 ){
        rc = SQLITE_BUSY;
        break;
      }
    }

    /* Get the exclusive locks at the system level.  Then if successful
    ** also mark the local connection as being locked.
    */
    if( rc==SQLITE_OK ){
      rc = winShmSystemLock(pShmNode, WINSHM_WRLCK, ofst+WIN_SHM_BASE, n);
      if( rc==SQLITE_OK ){
        assert( (p->sharedMask & mask)==0 );
        p->exclMask |= mask;
      }
    }
  }
  sqlite3_mutex_leave(pShmNode->mutex);
  OSTRACE(("SHM-LOCK pid=%lu, id=%d, sharedMask=%03x, exclMask=%03x, rc=%s\n",
           osGetCurrentProcessId(), p->id, p->sharedMask, p->exclMask,
           sqlite3ErrName(rc)));
  return rc;
}

/*
** Implement a memory barrier or memory fence on shared memory.
**
** All loads and stores begun before the barrier must complete before
** any load or store begun after the barrier.
*/
static void winShmBarrier(
  sqlite3_file *fd          /* Database holding the shared memory */
){
  UNUSED_PARAMETER(fd);
  sqlite3MemoryBarrier();   /* compiler-defined memory barrier */
  winShmEnterMutex();       /* Also mutex, for redundancy */
  winShmLeaveMutex();
}

/*
** This function is called to obtain a pointer to region iRegion of the
** shared-memory associated with the database file fd. Shared-memory regions
** are numbered starting from zero. Each shared-memory region is szRegion
** bytes in size.
**
** If an error occurs, an error code is returned and *pp is set to NULL.
**
** Otherwise, if the isWrite parameter is 0 and the requested shared-memory
** region has not been allocated (by any client, including one running in a
** separate process), then *pp is set to NULL and SQLITE_OK returned. If
** isWrite is non-zero and the requested shared-memory region has not yet
** been allocated, it is allocated by this function.
**
** If the shared-memory region has already been allocated or is allocated by
** this call as described above, then it is mapped into this processes
** address space (if it is not already), *pp is set to point to the mapped
** memory and SQLITE_OK returned.
*/
static int winShmMap(
  sqlite3_file *fd,               /* Handle open on database file */
  int iRegion,                    /* Region to retrieve */
  int szRegion,                   /* Size of regions */
  int isWrite,                    /* True to extend file if necessary */
  void volatile **pp              /* OUT: Mapped memory */
){
  winFile *pDbFd = (winFile*)fd;
  winShm *pShm = pDbFd->pShm;
  winShmNode *pShmNode;
  DWORD protect = PAGE_READWRITE;
  DWORD flags = FILE_MAP_WRITE | FILE_MAP_READ;
  int rc = SQLITE_OK;

  if( !pShm ){
    rc = winOpenSharedMemory(pDbFd);
    if( rc!=SQLITE_OK ) return rc;
    pShm = pDbFd->pShm;
    assert( pShm!=0 );
  }
  pShmNode = pShm->pShmNode;

  sqlite3_mutex_enter(pShmNode->mutex);
  if( pShmNode->isUnlocked ){
    rc = winLockSharedMemory(pShmNode);
    if( rc!=SQLITE_OK ) goto shmpage_out;
    pShmNode->isUnlocked = 0;
  }
  assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 );

  if( pShmNode->nRegion<=iRegion ){
    struct ShmRegion *apNew;           /* New aRegion[] array */
    int nByte = (iRegion+1)*szRegion;  /* Minimum required file size */
    sqlite3_int64 sz;                  /* Current size of wal-index file */

    pShmNode->szRegion = szRegion;

    /* The requested region is not mapped into this processes address space.
    ** Check to see if it has been allocated (i.e. if the wal-index file is
    ** large enough to contain the requested region).
    */
    rc = winFileSize((sqlite3_file *)&pShmNode->hFile, &sz);
    if( rc!=SQLITE_OK ){
      rc = winLogError(SQLITE_IOERR_SHMSIZE, osGetLastError(),
                       "winShmMap1", pDbFd->zPath);
      goto shmpage_out;
    }

    if( sz<nByte ){
      /* The requested memory region does not exist. If isWrite is set to
      ** zero, exit early. *pp will be set to NULL and SQLITE_OK returned.
      **
      ** Alternatively, if isWrite is non-zero, use ftruncate() to allocate
      ** the requested memory region.
      */
      if( !isWrite ) goto shmpage_out;
      rc = winTruncate((sqlite3_file *)&pShmNode->hFile, nByte);
      if( rc!=SQLITE_OK ){
        rc = winLogError(SQLITE_IOERR_SHMSIZE, osGetLastError(),
                         "winShmMap2", pDbFd->zPath);
        goto shmpage_out;
      }
    }

    /* Map the requested memory region into this processes address space. */
    apNew = (struct ShmRegion *)sqlite3_realloc64(
        pShmNode->aRegion, (iRegion+1)*sizeof(apNew[0])
    );
    if( !apNew ){
      rc = SQLITE_IOERR_NOMEM_BKPT;
      goto shmpage_out;
    }
    pShmNode->aRegion = apNew;

    if( pShmNode->isReadonly ){
      protect = PAGE_READONLY;
      flags = FILE_MAP_READ;
    }

    while( pShmNode->nRegion<=iRegion ){
      HANDLE hMap = NULL;         /* file-mapping handle */
      void *pMap = 0;             /* Mapped memory region */

#if SQLITE_OS_WINRT
      hMap = osCreateFileMappingFromApp(pShmNode->hFile.h,
          NULL, protect, nByte, NULL
      );
#elif defined(SQLITE_WIN32_HAS_WIDE)
      hMap = osCreateFileMappingW(pShmNode->hFile.h,
          NULL, protect, 0, nByte, NULL
      );
#elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA
      hMap = osCreateFileMappingA(pShmNode->hFile.h,
          NULL, protect, 0, nByte, NULL
      );
#endif
      OSTRACE(("SHM-MAP-CREATE pid=%lu, region=%d, size=%d, rc=%s\n",
               osGetCurrentProcessId(), pShmNode->nRegion, nByte,
               hMap ? "ok" : "failed"));
      if( hMap ){
        int iOffset = pShmNode->nRegion*szRegion;
        int iOffsetShift = iOffset % winSysInfo.dwAllocationGranularity;
#if SQLITE_OS_WINRT
        pMap = osMapViewOfFileFromApp(hMap, flags,
            iOffset - iOffsetShift, szRegion + iOffsetShift
        );
#else
        pMap = osMapViewOfFile(hMap, flags,
            0, iOffset - iOffsetShift, szRegion + iOffsetShift
        );
#endif
        OSTRACE(("SHM-MAP-MAP pid=%lu, region=%d, offset=%d, size=%d, rc=%s\n",
                 osGetCurrentProcessId(), pShmNode->nRegion, iOffset,
                 szRegion, pMap ? "ok" : "failed"));
      }
      if( !pMap ){
        pShmNode->lastErrno = osGetLastError();
        rc = winLogError(SQLITE_IOERR_SHMMAP, pShmNode->lastErrno,
                         "winShmMap3", pDbFd->zPath);
        if( hMap ) osCloseHandle(hMap);
        goto shmpage_out;
      }

      pShmNode->aRegion[pShmNode->nRegion].pMap = pMap;
      pShmNode->aRegion[pShmNode->nRegion].hMap = hMap;
      pShmNode->nRegion++;
    }
  }

shmpage_out:
  if( pShmNode->nRegion>iRegion ){
    int iOffset = iRegion*szRegion;
    int iOffsetShift = iOffset % winSysInfo.dwAllocationGranularity;
    char *p = (char *)pShmNode->aRegion[iRegion].pMap;
    *pp = (void *)&p[iOffsetShift];
  }else{
    *pp = 0;
  }
  if( pShmNode->isReadonly && rc==SQLITE_OK ) rc = SQLITE_READONLY;
  sqlite3_mutex_leave(pShmNode->mutex);
  return rc;
}

#else
# define winShmMap     0
# define winShmLock    0
# define winShmBarrier 0
# define winShmUnmap   0
#endif /* #ifndef SQLITE_OMIT_WAL */

/*
** Cleans up the mapped region of the specified file, if any.
*/
#if SQLITE_MAX_MMAP_SIZE>0
static int winUnmapfile(winFile *pFile){
  assert( pFile!=0 );
  OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, pMapRegion=%p, "
           "mmapSize=%lld, mmapSizeMax=%lld\n",
           osGetCurrentProcessId(), pFile, pFile->hMap, pFile->pMapRegion,
           pFile->mmapSize, pFile->mmapSizeMax));
  if( pFile->pMapRegion ){
    if( !osUnmapViewOfFile(pFile->pMapRegion) ){
      pFile->lastErrno = osGetLastError();
      OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, pMapRegion=%p, "
               "rc=SQLITE_IOERR_MMAP\n", osGetCurrentProcessId(), pFile,
               pFile->pMapRegion));
      return winLogError(SQLITE_IOERR_MMAP, pFile->lastErrno,
                         "winUnmapfile1", pFile->zPath);
    }
    pFile->pMapRegion = 0;
    pFile->mmapSize = 0;
  }
  if( pFile->hMap!=NULL ){
    if( !osCloseHandle(pFile->hMap) ){
      pFile->lastErrno = osGetLastError();
      OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, rc=SQLITE_IOERR_MMAP\n",
               osGetCurrentProcessId(), pFile, pFile->hMap));
      return winLogError(SQLITE_IOERR_MMAP, pFile->lastErrno,
                         "winUnmapfile2", pFile->zPath);
    }
    pFile->hMap = NULL;
  }
  OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFile));
  return SQLITE_OK;
}

/*
** Memory map or remap the file opened by file-descriptor pFd (if the file
** is already mapped, the existing mapping is replaced by the new). Or, if
** there already exists a mapping for this file, and there are still
** outstanding xFetch() references to it, this function is a no-op.
**
** If parameter nByte is non-negative, then it is the requested size of
** the mapping to create. Otherwise, if nByte is less than zero, then the
** requested size is the size of the file on disk. The actual size of the
** created mapping is either the requested size or the value configured
** using SQLITE_FCNTL_MMAP_SIZE, whichever is smaller.
**
** SQLITE_OK is returned if no error occurs (even if the mapping is not
** recreated as a result of outstanding references) or an SQLite error
** code otherwise.
*/
static int winMapfile(winFile *pFd, sqlite3_int64 nByte){
  sqlite3_int64 nMap = nByte;
  int rc;

  assert( nMap>=0 || pFd->nFetchOut==0 );
  OSTRACE(("MAP-FILE pid=%lu, pFile=%p, size=%lld\n",
           osGetCurrentProcessId(), pFd, nByte));

  if( pFd->nFetchOut>0 ) return SQLITE_OK;

  if( nMap<0 ){
    rc = winFileSize((sqlite3_file*)pFd, &nMap);
    if( rc ){
      OSTRACE(("MAP-FILE pid=%lu, pFile=%p, rc=SQLITE_IOERR_FSTAT\n",
               osGetCurrentProcessId(), pFd));
      return SQLITE_IOERR_FSTAT;
    }
  }
  if( nMap>pFd->mmapSizeMax ){
    nMap = pFd->mmapSizeMax;
  }
  nMap &= ~(sqlite3_int64)(winSysInfo.dwPageSize - 1);

  if( nMap==0 && pFd->mmapSize>0 ){
    winUnmapfile(pFd);
  }
  if( nMap!=pFd->mmapSize ){
    void *pNew = 0;
    DWORD protect = PAGE_READONLY;
    DWORD flags = FILE_MAP_READ;

    winUnmapfile(pFd);
#ifdef SQLITE_MMAP_READWRITE
    if( (pFd->ctrlFlags & WINFILE_RDONLY)==0 ){
      protect = PAGE_READWRITE;
      flags |= FILE_MAP_WRITE;
    }
#endif
#if SQLITE_OS_WINRT
    pFd->hMap = osCreateFileMappingFromApp(pFd->h, NULL, protect, nMap, NULL);
#elif defined(SQLITE_WIN32_HAS_WIDE)
    pFd->hMap = osCreateFileMappingW(pFd->h, NULL, protect,
                                (DWORD)((nMap>>32) & 0xffffffff),
                                (DWORD)(nMap & 0xffffffff), NULL);
#elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA
    pFd->hMap = osCreateFileMappingA(pFd->h, NULL, protect,
                                (DWORD)((nMap>>32) & 0xffffffff),
                                (DWORD)(nMap & 0xffffffff), NULL);
#endif
    if( pFd->hMap==NULL ){
      pFd->lastErrno = osGetLastError();
      rc = winLogError(SQLITE_IOERR_MMAP, pFd->lastErrno,
                       "winMapfile1", pFd->zPath);
      /* Log the error, but continue normal operation using xRead/xWrite */
      OSTRACE(("MAP-FILE-CREATE pid=%lu, pFile=%p, rc=%s\n",
               osGetCurrentProcessId(), pFd, sqlite3ErrName(rc)));
      return SQLITE_OK;
    }
    assert( (nMap % winSysInfo.dwPageSize)==0 );
    assert( sizeof(SIZE_T)==sizeof(sqlite3_int64) || nMap<=0xffffffff );
#if SQLITE_OS_WINRT
    pNew = osMapViewOfFileFromApp(pFd->hMap, flags, 0, (SIZE_T)nMap);
#else
    pNew = osMapViewOfFile(pFd->hMap, flags, 0, 0, (SIZE_T)nMap);
#endif
    if( pNew==NULL ){
      osCloseHandle(pFd->hMap);
      pFd->hMap = NULL;
      pFd->lastErrno = osGetLastError();
      rc = winLogError(SQLITE_IOERR_MMAP, pFd->lastErrno,
                       "winMapfile2", pFd->zPath);
      /* Log the error, but continue normal operation using xRead/xWrite */
      OSTRACE(("MAP-FILE-MAP pid=%lu, pFile=%p, rc=%s\n",
               osGetCurrentProcessId(), pFd, sqlite3ErrName(rc)));
      return SQLITE_OK;
    }
    pFd->pMapRegion = pNew;
    pFd->mmapSize = nMap;
  }

  OSTRACE(("MAP-FILE pid=%lu, pFile=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFd));
  return SQLITE_OK;
}
#endif /* SQLITE_MAX_MMAP_SIZE>0 */

/*
** If possible, return a pointer to a mapping of file fd starting at offset
** iOff. The mapping must be valid for at least nAmt bytes.
**
** If such a pointer can be obtained, store it in *pp and return SQLITE_OK.
** Or, if one cannot but no error occurs, set *pp to 0 and return SQLITE_OK.
** Finally, if an error does occur, return an SQLite error code. The final
** value of *pp is undefined in this case.
**
** If this function does return a pointer, the caller must eventually
** release the reference by calling winUnfetch().
*/
static int winFetch(sqlite3_file *fd, i64 iOff, int nAmt, void **pp){
#if SQLITE_MAX_MMAP_SIZE>0
  winFile *pFd = (winFile*)fd;   /* The underlying database file */
#endif
  *pp = 0;

  OSTRACE(("FETCH pid=%lu, pFile=%p, offset=%lld, amount=%d, pp=%p\n",
           osGetCurrentProcessId(), fd, iOff, nAmt, pp));

#if SQLITE_MAX_MMAP_SIZE>0
  if( pFd->mmapSizeMax>0 ){
    /* Ensure that there is always at least a 256 byte buffer of addressable
    ** memory following the returned page. If the database is corrupt,
    ** SQLite may overread the page slightly (in practice only a few bytes,
    ** but 256 is safe, round, number).  */
    const int nEofBuffer = 256;
    if( pFd->pMapRegion==0 ){
      int rc = winMapfile(pFd, -1);
      if( rc!=SQLITE_OK ){
        OSTRACE(("FETCH pid=%lu, pFile=%p, rc=%s\n",
                 osGetCurrentProcessId(), pFd, sqlite3ErrName(rc)));
        return rc;
      }
    }
    if( pFd->mmapSize >= (iOff+nAmt+nEofBuffer) ){
      assert( pFd->pMapRegion!=0 );
      *pp = &((u8 *)pFd->pMapRegion)[iOff];
      pFd->nFetchOut++;
    }
  }
#endif

  OSTRACE(("FETCH pid=%lu, pFile=%p, pp=%p, *pp=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), fd, pp, *pp));
  return SQLITE_OK;
}

/*
** If the third argument is non-NULL, then this function releases a
** reference obtained by an earlier call to winFetch(). The second
** argument passed to this function must be the same as the corresponding
** argument that was passed to the winFetch() invocation.
**
** Or, if the third argument is NULL, then this function is being called
** to inform the VFS layer that, according to POSIX, any existing mapping
** may now be invalid and should be unmapped.
*/
static int winUnfetch(sqlite3_file *fd, i64 iOff, void *p){
#if SQLITE_MAX_MMAP_SIZE>0
  winFile *pFd = (winFile*)fd;   /* The underlying database file */

  /* If p==0 (unmap the entire file) then there must be no outstanding
  ** xFetch references. Or, if p!=0 (meaning it is an xFetch reference),
  ** then there must be at least one outstanding.  */
  assert( (p==0)==(pFd->nFetchOut==0) );

  /* If p!=0, it must match the iOff value. */
  assert( p==0 || p==&((u8 *)pFd->pMapRegion)[iOff] );

  OSTRACE(("UNFETCH pid=%lu, pFile=%p, offset=%lld, p=%p\n",
           osGetCurrentProcessId(), pFd, iOff, p));

  if( p ){
    pFd->nFetchOut--;
  }else{
    /* FIXME:  If Windows truly always prevents truncating or deleting a
    ** file while a mapping is held, then the following winUnmapfile() call
    ** is unnecessary can be omitted - potentially improving
    ** performance.  */
    winUnmapfile(pFd);
  }

  assert( pFd->nFetchOut>=0 );
#endif

  OSTRACE(("UNFETCH pid=%lu, pFile=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), fd));
  return SQLITE_OK;
}

/*
** Here ends the implementation of all sqlite3_file methods.
**
********************** End sqlite3_file Methods *******************************
******************************************************************************/

/*
** This vector defines all the methods that can operate on an
** sqlite3_file for win32.
*/
static const sqlite3_io_methods winIoMethod = {
  3,                              /* iVersion */
  winClose,                       /* xClose */
  winRead,                        /* xRead */
  winWrite,                       /* xWrite */
  winTruncate,                    /* xTruncate */
  winSync,                        /* xSync */
  winFileSize,                    /* xFileSize */
  winLock,                        /* xLock */
  winUnlock,                      /* xUnlock */
  winCheckReservedLock,           /* xCheckReservedLock */
  winFileControl,                 /* xFileControl */
  winSectorSize,                  /* xSectorSize */
  winDeviceCharacteristics,       /* xDeviceCharacteristics */
  winShmMap,                      /* xShmMap */
  winShmLock,                     /* xShmLock */
  winShmBarrier,                  /* xShmBarrier */
  winShmUnmap,                    /* xShmUnmap */
  winFetch,                       /* xFetch */
  winUnfetch                      /* xUnfetch */
};

/*
** This vector defines all the methods that can operate on an
** sqlite3_file for win32 without performing any locking.
*/
static const sqlite3_io_methods winIoNolockMethod = {
  3,                              /* iVersion */
  winClose,                       /* xClose */
  winRead,                        /* xRead */
  winWrite,                       /* xWrite */
  winTruncate,                    /* xTruncate */
  winSync,                        /* xSync */
  winFileSize,                    /* xFileSize */
  winNolockLock,                  /* xLock */
  winNolockUnlock,                /* xUnlock */
  winNolockCheckReservedLock,     /* xCheckReservedLock */
  winFileControl,                 /* xFileControl */
  winSectorSize,                  /* xSectorSize */
  winDeviceCharacteristics,       /* xDeviceCharacteristics */
  winShmMap,                      /* xShmMap */
  winShmLock,                     /* xShmLock */
  winShmBarrier,                  /* xShmBarrier */
  winShmUnmap,                    /* xShmUnmap */
  winFetch,                       /* xFetch */
  winUnfetch                      /* xUnfetch */
};

static winVfsAppData winAppData = {
  &winIoMethod,       /* pMethod */
  0,                  /* pAppData */
  0                   /* bNoLock */
};

static winVfsAppData winNolockAppData = {
  &winIoNolockMethod, /* pMethod */
  0,                  /* pAppData */
  1                   /* bNoLock */
};

/****************************************************************************
**************************** sqlite3_vfs methods ****************************
**
** This division contains the implementation of methods on the
** sqlite3_vfs object.
*/

#if defined(__CYGWIN__)
/*
** Convert a filename from whatever the underlying operating system
** supports for filenames into UTF-8.  Space to hold the result is
** obtained from malloc and must be freed by the calling function.
*/
static char *winConvertToUtf8Filename(const void *zFilename){
  char *zConverted = 0;
  if( osIsNT() ){
    zConverted = winUnicodeToUtf8(zFilename);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    zConverted = winMbcsToUtf8(zFilename, osAreFileApisANSI());
  }
#endif
  /* caller will handle out of memory */
  return zConverted;
}
#endif

/*
** Convert a UTF-8 filename into whatever form the underlying
** operating system wants filenames in.  Space to hold the result
** is obtained from malloc and must be freed by the calling
** function.
*/
static void *winConvertFromUtf8Filename(const char *zFilename){
  void *zConverted = 0;
  if( osIsNT() ){
    zConverted = winUtf8ToUnicode(zFilename);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    zConverted = winUtf8ToMbcs(zFilename, osAreFileApisANSI());
  }
#endif
  /* caller will handle out of memory */
  return zConverted;
}

/*
** This function returns non-zero if the specified UTF-8 string buffer
** ends with a directory separator character or one was successfully
** added to it.
*/
static int winMakeEndInDirSep(int nBuf, char *zBuf){
  if( zBuf ){
    int nLen = sqlite3Strlen30(zBuf);
    if( nLen>0 ){
      if( winIsDirSep(zBuf[nLen-1]) ){
        return 1;
      }else if( nLen+1<nBuf ){
        zBuf[nLen] = winGetDirSep();
        zBuf[nLen+1] = '\0';
        return 1;
      }
    }
  }
  return 0;
}

/*
** If sqlite3_temp_directory is defined, take the mutex and return true.
**
** If sqlite3_temp_directory is NULL (undefined), omit the mutex and
** return false.
*/
static int winTempDirDefined(void){
  sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR));
  if( sqlite3_temp_directory!=0 ) return 1;
  sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR));
  return 0;
}

/*
** Create a temporary file name and store the resulting pointer into pzBuf.
** The pointer returned in pzBuf must be freed via sqlite3_free().
*/
static int winGetTempname(sqlite3_vfs *pVfs, char **pzBuf){
  static char zChars[] =
    "abcdefghijklmnopqrstuvwxyz"
    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
    "0123456789";
  size_t i, j;
  DWORD pid;
  int nPre = sqlite3Strlen30(SQLITE_TEMP_FILE_PREFIX);
  int nMax, nBuf, nDir, nLen;
  char *zBuf;

  /* It's odd to simulate an io-error here, but really this is just
  ** using the io-error infrastructure to test that SQLite handles this
  ** function failing.
  */
  SimulateIOError( return SQLITE_IOERR );

  /* Allocate a temporary buffer to store the fully qualified file
  ** name for the temporary file.  If this fails, we cannot continue.
  */
  nMax = pVfs->mxPathname; nBuf = nMax + 2;
  zBuf = sqlite3MallocZero( nBuf );
  if( !zBuf ){
    OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
    return SQLITE_IOERR_NOMEM_BKPT;
  }

  /* Figure out the effective temporary directory.  First, check if one
  ** has been explicitly set by the application; otherwise, use the one
  ** configured by the operating system.
  */
  nDir = nMax - (nPre + 15);
  assert( nDir>0 );
  if( winTempDirDefined() ){
    int nDirLen = sqlite3Strlen30(sqlite3_temp_directory);
    if( nDirLen>0 ){
      if( !winIsDirSep(sqlite3_temp_directory[nDirLen-1]) ){
        nDirLen++;
      }
      if( nDirLen>nDir ){
        sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR));
        sqlite3_free(zBuf);
        OSTRACE(("TEMP-FILENAME rc=SQLITE_ERROR\n"));
        return winLogError(SQLITE_ERROR, 0, "winGetTempname1", 0);
      }
      sqlite3_snprintf(nMax, zBuf, "%s", sqlite3_temp_directory);
    }
    sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR));
  }

#if defined(__CYGWIN__)
  else{
    static const char *azDirs[] = {
       0, /* getenv("SQLITE_TMPDIR") */
       0, /* getenv("TMPDIR") */
       0, /* getenv("TMP") */
       0, /* getenv("TEMP") */
       0, /* getenv("USERPROFILE") */
       "/var/tmp",
       "/usr/tmp",
       "/tmp",
       ".",
       0        /* List terminator */
    };
    unsigned int i;
    const char *zDir = 0;

    if( !azDirs[0] ) azDirs[0] = getenv("SQLITE_TMPDIR");
    if( !azDirs[1] ) azDirs[1] = getenv("TMPDIR");
    if( !azDirs[2] ) azDirs[2] = getenv("TMP");
    if( !azDirs[3] ) azDirs[3] = getenv("TEMP");
    if( !azDirs[4] ) azDirs[4] = getenv("USERPROFILE");
    for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); zDir=azDirs[i++]){
      void *zConverted;
      if( zDir==0 ) continue;
      /* If the path starts with a drive letter followed by the colon
      ** character, assume it is already a native Win32 path; otherwise,
      ** it must be converted to a native Win32 path via the Cygwin API
      ** prior to using it.
      */
      if( winIsDriveLetterAndColon(zDir) ){
        zConverted = winConvertFromUtf8Filename(zDir);
        if( !zConverted ){
          sqlite3_free(zBuf);
          OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
          return SQLITE_IOERR_NOMEM_BKPT;
        }
        if( winIsDir(zConverted) ){
          sqlite3_snprintf(nMax, zBuf, "%s", zDir);
          sqlite3_free(zConverted);
          break;
        }
        sqlite3_free(zConverted);
      }else{
        zConverted = sqlite3MallocZero( nMax+1 );
        if( !zConverted ){
          sqlite3_free(zBuf);
          OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
          return SQLITE_IOERR_NOMEM_BKPT;
        }
        if( cygwin_conv_path(
                osIsNT() ? CCP_POSIX_TO_WIN_W : CCP_POSIX_TO_WIN_A, zDir,
                zConverted, nMax+1)<0 ){
          sqlite3_free(zConverted);
          sqlite3_free(zBuf);
          OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_CONVPATH\n"));
          return winLogError(SQLITE_IOERR_CONVPATH, (DWORD)errno,
                             "winGetTempname2", zDir);
        }
        if( winIsDir(zConverted) ){
          /* At this point, we know the candidate directory exists and should
          ** be used.  However, we may need to convert the string containing
          ** its name into UTF-8 (i.e. if it is UTF-16 right now).
          */
          char *zUtf8 = winConvertToUtf8Filename(zConverted);
          if( !zUtf8 ){
            sqlite3_free(zConverted);
            sqlite3_free(zBuf);
            OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
            return SQLITE_IOERR_NOMEM_BKPT;
          }
          sqlite3_snprintf(nMax, zBuf, "%s", zUtf8);
          sqlite3_free(zUtf8);
          sqlite3_free(zConverted);
          break;
        }
        sqlite3_free(zConverted);
      }
    }
  }
#elif !SQLITE_OS_WINRT && !defined(__CYGWIN__)
  else if( osIsNT() ){
    char *zMulti;
    LPWSTR zWidePath = sqlite3MallocZero( nMax*sizeof(WCHAR) );
    if( !zWidePath ){
      sqlite3_free(zBuf);
      OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
      return SQLITE_IOERR_NOMEM_BKPT;
    }
    if( osGetTempPathW(nMax, zWidePath)==0 ){
      sqlite3_free(zWidePath);
      sqlite3_free(zBuf);
      OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_GETTEMPPATH\n"));
      return winLogError(SQLITE_IOERR_GETTEMPPATH, osGetLastError(),
                         "winGetTempname2", 0);
    }
    zMulti = winUnicodeToUtf8(zWidePath);
    if( zMulti ){
      sqlite3_snprintf(nMax, zBuf, "%s", zMulti);
      sqlite3_free(zMulti);
      sqlite3_free(zWidePath);
    }else{
      sqlite3_free(zWidePath);
      sqlite3_free(zBuf);
      OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
      return SQLITE_IOERR_NOMEM_BKPT;
    }
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    char *zUtf8;
    char *zMbcsPath = sqlite3MallocZero( nMax );
    if( !zMbcsPath ){
      sqlite3_free(zBuf);
      OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
      return SQLITE_IOERR_NOMEM_BKPT;
    }
    if( osGetTempPathA(nMax, zMbcsPath)==0 ){
      sqlite3_free(zBuf);
      OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_GETTEMPPATH\n"));
      return winLogError(SQLITE_IOERR_GETTEMPPATH, osGetLastError(),
                         "winGetTempname3", 0);
    }
    zUtf8 = winMbcsToUtf8(zMbcsPath, osAreFileApisANSI());
    if( zUtf8 ){
      sqlite3_snprintf(nMax, zBuf, "%s", zUtf8);
      sqlite3_free(zUtf8);
    }else{
      sqlite3_free(zBuf);
      OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
      return SQLITE_IOERR_NOMEM_BKPT;
    }
  }
#endif /* SQLITE_WIN32_HAS_ANSI */
#endif /* !SQLITE_OS_WINRT */

  /*
  ** Check to make sure the temporary directory ends with an appropriate
  ** separator.  If it does not and there is not enough space left to add
  ** one, fail.
  */
  if( !winMakeEndInDirSep(nDir+1, zBuf) ){
    sqlite3_free(zBuf);
    OSTRACE(("TEMP-FILENAME rc=SQLITE_ERROR\n"));
    return winLogError(SQLITE_ERROR, 0, "winGetTempname4", 0);
  }

  /*
  ** Check that the output buffer is large enough for the temporary file
  ** name in the following format:
  **
  **   "<temporary_directory>/etilqs_XXXXXXXXXXXXXXX\0\0"
  **
  ** If not, return SQLITE_ERROR.  The number 17 is used here in order to
  ** account for the space used by the 15 character random suffix and the
  ** two trailing NUL characters.  The final directory separator character
  ** has already added if it was not already present.
  */
  nLen = sqlite3Strlen30(zBuf);
  if( (nLen + nPre + 17) > nBuf ){
    sqlite3_free(zBuf);
    OSTRACE(("TEMP-FILENAME rc=SQLITE_ERROR\n"));
    return winLogError(SQLITE_ERROR, 0, "winGetTempname5", 0);
  }

  sqlite3_snprintf(nBuf-16-nLen, zBuf+nLen, SQLITE_TEMP_FILE_PREFIX);

  j = sqlite3Strlen30(zBuf);
  sqlite3_randomness(15, &zBuf[j]);
  pid = osGetCurrentProcessId();
  for(i=0; i<15; i++, j++){
    zBuf[j] += pid & 0xff;
    pid >>= 8;
    zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
  }
  zBuf[j] = 0;
  zBuf[j+1] = 0;
  *pzBuf = zBuf;

  OSTRACE(("TEMP-FILENAME name=%s, rc=SQLITE_OK\n", zBuf));
  return SQLITE_OK;
}

/*
** Return TRUE if the named file is really a directory.  Return false if
** it is something other than a directory, or if there is any kind of memory
** allocation failure.
*/
static int winIsDir(const void *zConverted){
  DWORD attr;
  int rc = 0;
  DWORD lastErrno;

  if( osIsNT() ){
    int cnt = 0;
    WIN32_FILE_ATTRIBUTE_DATA sAttrData;
    memset(&sAttrData, 0, sizeof(sAttrData));
    while( !(rc = osGetFileAttributesExW((LPCWSTR)zConverted,
                             GetFileExInfoStandard,
                             &sAttrData)) && winRetryIoerr(&cnt, &lastErrno) ){}
    if( !rc ){
      return 0; /* Invalid name? */
    }
    attr = sAttrData.dwFileAttributes;
#if SQLITE_OS_WINCE==0
  }else{
    attr = osGetFileAttributesA((char*)zConverted);
#endif
  }
  return (attr!=INVALID_FILE_ATTRIBUTES) && (attr&FILE_ATTRIBUTE_DIRECTORY);
}

/* forward reference */
static int winAccess(
  sqlite3_vfs *pVfs,         /* Not used on win32 */
  const char *zFilename,     /* Name of file to check */
  int flags,                 /* Type of test to make on this file */
  int *pResOut               /* OUT: Result */
);

/*
** Open a file.
*/
static int winOpen(
  sqlite3_vfs *pVfs,        /* Used to get maximum path length and AppData */
  const char *zName,        /* Name of the file (UTF-8) */
  sqlite3_file *id,         /* Write the SQLite file handle here */
  int flags,                /* Open mode flags */
  int *pOutFlags            /* Status return flags */
){
  HANDLE h;
  DWORD lastErrno = 0;
  DWORD dwDesiredAccess;
  DWORD dwShareMode;
  DWORD dwCreationDisposition;
  DWORD dwFlagsAndAttributes = 0;
#if SQLITE_OS_WINCE
  int isTemp = 0;
#endif
  winVfsAppData *pAppData;
  winFile *pFile = (winFile*)id;
  void *zConverted;              /* Filename in OS encoding */
  const char *zUtf8Name = zName; /* Filename in UTF-8 encoding */
  int cnt = 0;

  /* If argument zPath is a NULL pointer, this function is required to open
  ** a temporary file. Use this buffer to store the file name in.
  */
  char *zTmpname = 0; /* For temporary filename, if necessary. */

  int rc = SQLITE_OK;            /* Function Return Code */
#if !defined(NDEBUG) || SQLITE_OS_WINCE
  int eType = flags&0xFFFFFF00;  /* Type of file to open */
#endif

  int isExclusive  = (flags & SQLITE_OPEN_EXCLUSIVE);
  int isDelete     = (flags & SQLITE_OPEN_DELETEONCLOSE);
  int isCreate     = (flags & SQLITE_OPEN_CREATE);
  int isReadonly   = (flags & SQLITE_OPEN_READONLY);
  int isReadWrite  = (flags & SQLITE_OPEN_READWRITE);

#ifndef NDEBUG
  int isOpenJournal = (isCreate && (
        eType==SQLITE_OPEN_SUPER_JOURNAL
     || eType==SQLITE_OPEN_MAIN_JOURNAL
     || eType==SQLITE_OPEN_WAL
  ));
#endif

  OSTRACE(("OPEN name=%s, pFile=%p, flags=%x, pOutFlags=%p\n",
           zUtf8Name, id, flags, pOutFlags));

  /* Check the following statements are true:
  **
  **   (a) Exactly one of the READWRITE and READONLY flags must be set, and
  **   (b) if CREATE is set, then READWRITE must also be set, and
  **   (c) if EXCLUSIVE is set, then CREATE must also be set.
  **   (d) if DELETEONCLOSE is set, then CREATE must also be set.
  */
  assert((isReadonly==0 || isReadWrite==0) && (isReadWrite || isReadonly));
  assert(isCreate==0 || isReadWrite);
  assert(isExclusive==0 || isCreate);
  assert(isDelete==0 || isCreate);

  /* The main DB, main journal, WAL file and super-journal are never
  ** automatically deleted. Nor are they ever temporary files.  */
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_DB );
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_JOURNAL );
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_SUPER_JOURNAL );
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_WAL );

  /* Assert that the upper layer has set one of the "file-type" flags. */
  assert( eType==SQLITE_OPEN_MAIN_DB      || eType==SQLITE_OPEN_TEMP_DB
       || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL
       || eType==SQLITE_OPEN_SUBJOURNAL   || eType==SQLITE_OPEN_SUPER_JOURNAL
       || eType==SQLITE_OPEN_TRANSIENT_DB || eType==SQLITE_OPEN_WAL
  );

  assert( pFile!=0 );
  memset(pFile, 0, sizeof(winFile));
  pFile->h = INVALID_HANDLE_VALUE;

#if SQLITE_OS_WINRT
  if( !zUtf8Name && !sqlite3_temp_directory ){
    sqlite3_log(SQLITE_ERROR,
        "sqlite3_temp_directory variable should be set for WinRT");
  }
#endif

  /* If the second argument to this function is NULL, generate a
  ** temporary file name to use
  */
  if( !zUtf8Name ){
    assert( isDelete && !isOpenJournal );
    rc = winGetTempname(pVfs, &zTmpname);
    if( rc!=SQLITE_OK ){
      OSTRACE(("OPEN name=%s, rc=%s", zUtf8Name, sqlite3ErrName(rc)));
      return rc;
    }
    zUtf8Name = zTmpname;
  }

  /* Database filenames are double-zero terminated if they are not
  ** URIs with parameters.  Hence, they can always be passed into
  ** sqlite3_uri_parameter().
  */
  assert( (eType!=SQLITE_OPEN_MAIN_DB) || (flags & SQLITE_OPEN_URI) ||
       zUtf8Name[sqlite3Strlen30(zUtf8Name)+1]==0 );

  /* Convert the filename to the system encoding. */
  zConverted = winConvertFromUtf8Filename(zUtf8Name);
  if( zConverted==0 ){
    sqlite3_free(zTmpname);
    OSTRACE(("OPEN name=%s, rc=SQLITE_IOERR_NOMEM", zUtf8Name));
    return SQLITE_IOERR_NOMEM_BKPT;
  }

  if( winIsDir(zConverted) ){
    sqlite3_free(zConverted);
    sqlite3_free(zTmpname);
    OSTRACE(("OPEN name=%s, rc=SQLITE_CANTOPEN_ISDIR", zUtf8Name));
    return SQLITE_CANTOPEN_ISDIR;
  }

  if( isReadWrite ){
    dwDesiredAccess = GENERIC_READ | GENERIC_WRITE;
  }else{
    dwDesiredAccess = GENERIC_READ;
  }

  /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is
  ** created. SQLite doesn't use it to indicate "exclusive access"
  ** as it is usually understood.
  */
  if( isExclusive ){
    /* Creates a new file, only if it does not already exist. */
    /* If the file exists, it fails. */
    dwCreationDisposition = CREATE_NEW;
  }else if( isCreate ){
    /* Open existing file, or create if it doesn't exist */
    dwCreationDisposition = OPEN_ALWAYS;
  }else{
    /* Opens a file, only if it exists. */
    dwCreationDisposition = OPEN_EXISTING;
  }

  if( 0==sqlite3_uri_boolean(zName, "exclusive", 0) ){
    dwShareMode = FILE_SHARE_READ | FILE_SHARE_WRITE;
  }else{
    dwShareMode = 0;
  }

  if( isDelete ){
#if SQLITE_OS_WINCE
    dwFlagsAndAttributes = FILE_ATTRIBUTE_HIDDEN;
    isTemp = 1;
#else
    dwFlagsAndAttributes = FILE_ATTRIBUTE_TEMPORARY
                               | FILE_ATTRIBUTE_HIDDEN
                               | FILE_FLAG_DELETE_ON_CLOSE;
#endif
  }else{
    dwFlagsAndAttributes = FILE_ATTRIBUTE_NORMAL;
  }
  /* Reports from the internet are that performance is always
  ** better if FILE_FLAG_RANDOM_ACCESS is used.  Ticket #2699. */
#if SQLITE_OS_WINCE
  dwFlagsAndAttributes |= FILE_FLAG_RANDOM_ACCESS;
#endif

  if( osIsNT() ){
#if SQLITE_OS_WINRT
    CREATEFILE2_EXTENDED_PARAMETERS extendedParameters;
    extendedParameters.dwSize = sizeof(CREATEFILE2_EXTENDED_PARAMETERS);
    extendedParameters.dwFileAttributes =
            dwFlagsAndAttributes & FILE_ATTRIBUTE_MASK;
    extendedParameters.dwFileFlags = dwFlagsAndAttributes & FILE_FLAG_MASK;
    extendedParameters.dwSecurityQosFlags = SECURITY_ANONYMOUS;
    extendedParameters.lpSecurityAttributes = NULL;
    extendedParameters.hTemplateFile = NULL;
    do{
      h = osCreateFile2((LPCWSTR)zConverted,
                        dwDesiredAccess,
                        dwShareMode,
                        dwCreationDisposition,
                        &extendedParameters);
      if( h!=INVALID_HANDLE_VALUE ) break;
      if( isReadWrite ){
        int rc2, isRO = 0;
        sqlite3BeginBenignMalloc();
        rc2 = winAccess(pVfs, zUtf8Name, SQLITE_ACCESS_READ, &isRO);
        sqlite3EndBenignMalloc();
        if( rc2==SQLITE_OK && isRO ) break;
      }
    }while( winRetryIoerr(&cnt, &lastErrno) );
#else
    do{
      h = osCreateFileW((LPCWSTR)zConverted,
                        dwDesiredAccess,
                        dwShareMode, NULL,
                        dwCreationDisposition,
                        dwFlagsAndAttributes,
                        NULL);
      if( h!=INVALID_HANDLE_VALUE ) break;
      if( isReadWrite ){
        int rc2, isRO = 0;
        sqlite3BeginBenignMalloc();
        rc2 = winAccess(pVfs, zUtf8Name, SQLITE_ACCESS_READ, &isRO);
        sqlite3EndBenignMalloc();
        if( rc2==SQLITE_OK && isRO ) break;
      }
    }while( winRetryIoerr(&cnt, &lastErrno) );
#endif
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    do{
      h = osCreateFileA((LPCSTR)zConverted,
                        dwDesiredAccess,
                        dwShareMode, NULL,
                        dwCreationDisposition,
                        dwFlagsAndAttributes,
                        NULL);
      if( h!=INVALID_HANDLE_VALUE ) break;
      if( isReadWrite ){
        int rc2, isRO = 0;
        sqlite3BeginBenignMalloc();
        rc2 = winAccess(pVfs, zUtf8Name, SQLITE_ACCESS_READ, &isRO);
        sqlite3EndBenignMalloc();
        if( rc2==SQLITE_OK && isRO ) break;
      }
    }while( winRetryIoerr(&cnt, &lastErrno) );
  }
#endif
  winLogIoerr(cnt, __LINE__);

  OSTRACE(("OPEN file=%p, name=%s, access=%lx, rc=%s\n", h, zUtf8Name,
           dwDesiredAccess, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok"));

  if( h==INVALID_HANDLE_VALUE ){
    sqlite3_free(zConverted);
    sqlite3_free(zTmpname);
    if( isReadWrite && !isExclusive ){
      return winOpen(pVfs, zName, id,
         ((flags|SQLITE_OPEN_READONLY) &
                     ~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)),
         pOutFlags);
    }else{
      pFile->lastErrno = lastErrno;
      winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name);
      return SQLITE_CANTOPEN_BKPT;
    }
  }

  if( pOutFlags ){
    if( isReadWrite ){
      *pOutFlags = SQLITE_OPEN_READWRITE;
    }else{
      *pOutFlags = SQLITE_OPEN_READONLY;
    }
  }

  OSTRACE(("OPEN file=%p, name=%s, access=%lx, pOutFlags=%p, *pOutFlags=%d, "
           "rc=%s\n", h, zUtf8Name, dwDesiredAccess, pOutFlags, pOutFlags ?
           *pOutFlags : 0, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok"));

  pAppData = (winVfsAppData*)pVfs->pAppData;

#if SQLITE_OS_WINCE
  {
    if( isReadWrite && eType==SQLITE_OPEN_MAIN_DB
         && ((pAppData==NULL) || !pAppData->bNoLock)
         && (rc = winceCreateLock(zName, pFile))!=SQLITE_OK
    ){
      osCloseHandle(h);
      sqlite3_free(zConverted);
      sqlite3_free(zTmpname);
      OSTRACE(("OPEN-CE-LOCK name=%s, rc=%s\n", zName, sqlite3ErrName(rc)));
      return rc;
    }
  }
  if( isTemp ){
    pFile->zDeleteOnClose = zConverted;
  }else
#endif
  {
    sqlite3_free(zConverted);
  }

  sqlite3_free(zTmpname);
  id->pMethods = pAppData ? pAppData->pMethod : &winIoMethod;
  pFile->pVfs = pVfs;
  pFile->h = h;
  if( isReadonly ){
    pFile->ctrlFlags |= WINFILE_RDONLY;
  }
  if( (flags & SQLITE_OPEN_MAIN_DB)
   && sqlite3_uri_boolean(zName, "psow", SQLITE_POWERSAFE_OVERWRITE) 
  ){
    pFile->ctrlFlags |= WINFILE_PSOW;
  }
  pFile->lastErrno = NO_ERROR;
  pFile->zPath = zName;
#if SQLITE_MAX_MMAP_SIZE>0
  pFile->hMap = NULL;
  pFile->pMapRegion = 0;
  pFile->mmapSize = 0;
  pFile->mmapSizeMax = sqlite3GlobalConfig.szMmap;
#endif

  OpenCounter(+1);
  return rc;
}

/*
** Delete the named file.
**
** Note that Windows does not allow a file to be deleted if some other
** process has it open.  Sometimes a virus scanner or indexing program
** will open a journal file shortly after it is created in order to do
** whatever it does.  While this other process is holding the
** file open, we will be unable to delete it.  To work around this
** problem, we delay 100 milliseconds and try to delete again.  Up
** to MX_DELETION_ATTEMPTs deletion attempts are run before giving
** up and returning an error.
*/
static int winDelete(
  sqlite3_vfs *pVfs,          /* Not used on win32 */
  const char *zFilename,      /* Name of file to delete */
  int syncDir                 /* Not used on win32 */
){
  int cnt = 0;
  int rc;
  DWORD attr;
  DWORD lastErrno = 0;
  void *zConverted;
  UNUSED_PARAMETER(pVfs);
  UNUSED_PARAMETER(syncDir);

  SimulateIOError(return SQLITE_IOERR_DELETE);
  OSTRACE(("DELETE name=%s, syncDir=%d\n", zFilename, syncDir));

  zConverted = winConvertFromUtf8Filename(zFilename);
  if( zConverted==0 ){
    OSTRACE(("DELETE name=%s, rc=SQLITE_IOERR_NOMEM\n", zFilename));
    return SQLITE_IOERR_NOMEM_BKPT;
  }
  if( osIsNT() ){
    do {
#if SQLITE_OS_WINRT
      WIN32_FILE_ATTRIBUTE_DATA sAttrData;
      memset(&sAttrData, 0, sizeof(sAttrData));
      if ( osGetFileAttributesExW(zConverted, GetFileExInfoStandard,
                                  &sAttrData) ){
        attr = sAttrData.dwFileAttributes;
      }else{
        lastErrno = osGetLastError();
        if( lastErrno==ERROR_FILE_NOT_FOUND
         || lastErrno==ERROR_PATH_NOT_FOUND ){
          rc = SQLITE_IOERR_DELETE_NOENT; /* Already gone? */
        }else{
          rc = SQLITE_ERROR;
        }
        break;
      }
#else
      attr = osGetFileAttributesW(zConverted);
#endif
      if ( attr==INVALID_FILE_ATTRIBUTES ){
        lastErrno = osGetLastError();
        if( lastErrno==ERROR_FILE_NOT_FOUND
         || lastErrno==ERROR_PATH_NOT_FOUND ){
          rc = SQLITE_IOERR_DELETE_NOENT; /* Already gone? */
        }else{
          rc = SQLITE_ERROR;
        }
        break;
      }
      if ( attr&FILE_ATTRIBUTE_DIRECTORY ){
        rc = SQLITE_ERROR; /* Files only. */
        break;
      }
      if ( osDeleteFileW(zConverted) ){
        rc = SQLITE_OK; /* Deleted OK. */
        break;
      }
      if ( !winRetryIoerr(&cnt, &lastErrno) ){
        rc = SQLITE_ERROR; /* No more retries. */
        break;
      }
    } while(1);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    do {
      attr = osGetFileAttributesA(zConverted);
      if ( attr==INVALID_FILE_ATTRIBUTES ){
        lastErrno = osGetLastError();
        if( lastErrno==ERROR_FILE_NOT_FOUND
         || lastErrno==ERROR_PATH_NOT_FOUND ){
          rc = SQLITE_IOERR_DELETE_NOENT; /* Already gone? */
        }else{
          rc = SQLITE_ERROR;
        }
        break;
      }
      if ( attr&FILE_ATTRIBUTE_DIRECTORY ){
        rc = SQLITE_ERROR; /* Files only. */
        break;
      }
      if ( osDeleteFileA(zConverted) ){
        rc = SQLITE_OK; /* Deleted OK. */
        break;
      }
      if ( !winRetryIoerr(&cnt, &lastErrno) ){
        rc = SQLITE_ERROR; /* No more retries. */
        break;
      }
    } while(1);
  }
#endif
  if( rc && rc!=SQLITE_IOERR_DELETE_NOENT ){
    rc = winLogError(SQLITE_IOERR_DELETE, lastErrno, "winDelete", zFilename);
  }else{
    winLogIoerr(cnt, __LINE__);
  }
  sqlite3_free(zConverted);
  OSTRACE(("DELETE name=%s, rc=%s\n", zFilename, sqlite3ErrName(rc)));
  return rc;
}

/*
** Check the existence and status of a file.
*/
static int winAccess(
  sqlite3_vfs *pVfs,         /* Not used on win32 */
  const char *zFilename,     /* Name of file to check */
  int flags,                 /* Type of test to make on this file */
  int *pResOut               /* OUT: Result */
){
  DWORD attr;
  int rc = 0;
  DWORD lastErrno = 0;
  void *zConverted;
  UNUSED_PARAMETER(pVfs);

  SimulateIOError( return SQLITE_IOERR_ACCESS; );
  OSTRACE(("ACCESS name=%s, flags=%x, pResOut=%p\n",
           zFilename, flags, pResOut));

  if( zFilename==0 ){
    *pResOut = 0;
    OSTRACE(("ACCESS name=%s, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n",
             zFilename, pResOut, *pResOut));
    return SQLITE_OK;
  }

  zConverted = winConvertFromUtf8Filename(zFilename);
  if( zConverted==0 ){
    OSTRACE(("ACCESS name=%s, rc=SQLITE_IOERR_NOMEM\n", zFilename));
    return SQLITE_IOERR_NOMEM_BKPT;
  }
  if( osIsNT() ){
    int cnt = 0;
    WIN32_FILE_ATTRIBUTE_DATA sAttrData;
    memset(&sAttrData, 0, sizeof(sAttrData));
    while( !(rc = osGetFileAttributesExW((LPCWSTR)zConverted,
                             GetFileExInfoStandard,
                             &sAttrData)) && winRetryIoerr(&cnt, &lastErrno) ){}
    if( rc ){
      /* For an SQLITE_ACCESS_EXISTS query, treat a zero-length file
      ** as if it does not exist.
      */
      if(    flags==SQLITE_ACCESS_EXISTS
          && sAttrData.nFileSizeHigh==0
          && sAttrData.nFileSizeLow==0 ){
        attr = INVALID_FILE_ATTRIBUTES;
      }else{
        attr = sAttrData.dwFileAttributes;
      }
    }else{
      winLogIoerr(cnt, __LINE__);
      if( lastErrno!=ERROR_FILE_NOT_FOUND && lastErrno!=ERROR_PATH_NOT_FOUND ){
        sqlite3_free(zConverted);
        return winLogError(SQLITE_IOERR_ACCESS, lastErrno, "winAccess",
                           zFilename);
      }else{
        attr = INVALID_FILE_ATTRIBUTES;
      }
    }
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    attr = osGetFileAttributesA((char*)zConverted);
  }
#endif
  sqlite3_free(zConverted);
  switch( flags ){
    case SQLITE_ACCESS_READ:
    case SQLITE_ACCESS_EXISTS:
      rc = attr!=INVALID_FILE_ATTRIBUTES;
      break;
    case SQLITE_ACCESS_READWRITE:
      rc = attr!=INVALID_FILE_ATTRIBUTES &&
             (attr & FILE_ATTRIBUTE_READONLY)==0;
      break;
    default:
      assert(!"Invalid flags argument");
  }
  *pResOut = rc;
  OSTRACE(("ACCESS name=%s, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n",
           zFilename, pResOut, *pResOut));
  return SQLITE_OK;
}

/*
** Returns non-zero if the specified path name starts with the "long path"
** prefix.
*/
static BOOL winIsLongPathPrefix(
  const char *zPathname
){
  return ( zPathname[0]=='\\' && zPathname[1]=='\\'
        && zPathname[2]=='?'  && zPathname[3]=='\\' );
}

/*
** Returns non-zero if the specified path name starts with a drive letter
** followed by a colon character.
*/
static BOOL winIsDriveLetterAndColon(
  const char *zPathname
){
  return ( sqlite3Isalpha(zPathname[0]) && zPathname[1]==':' );
}

/*
** Returns non-zero if the specified path name should be used verbatim.  If
** non-zero is returned from this function, the calling function must simply
** use the provided path name verbatim -OR- resolve it into a full path name
** using the GetFullPathName Win32 API function (if available).
*/
static BOOL winIsVerbatimPathname(
  const char *zPathname
){
  /*
  ** If the path name starts with a forward slash or a backslash, it is either
  ** a legal UNC name, a volume relative path, or an absolute path name in the
  ** "Unix" format on Windows.  There is no easy way to differentiate between
  ** the final two cases; therefore, we return the safer return value of TRUE
  ** so that callers of this function will simply use it verbatim.
  */
  if ( winIsDirSep(zPathname[0]) ){
    return TRUE;
  }

  /*
  ** If the path name starts with a letter and a colon it is either a volume
  ** relative path or an absolute path.  Callers of this function must not
  ** attempt to treat it as a relative path name (i.e. they should simply use
  ** it verbatim).
  */
  if ( winIsDriveLetterAndColon(zPathname) ){
    return TRUE;
  }

  /*
  ** If we get to this point, the path name should almost certainly be a purely
  ** relative one (i.e. not a UNC name, not absolute, and not volume relative).
  */
  return FALSE;
}

/*
** Turn a relative pathname into a full pathname.  Write the full
** pathname into zOut[].  zOut[] will be at least pVfs->mxPathname
** bytes in size.
*/
static int winFullPathnameNoMutex(
  sqlite3_vfs *pVfs,            /* Pointer to vfs object */
  const char *zRelative,        /* Possibly relative input path */
  int nFull,                    /* Size of output buffer in bytes */
  char *zFull                   /* Output buffer */
){
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(__CYGWIN__)
  DWORD nByte;
  void *zConverted;
  char *zOut;
#endif

  /* If this path name begins with "/X:" or "\\?\", where "X" is any
  ** alphabetic character, discard the initial "/" from the pathname.
  */
  if( zRelative[0]=='/' && (winIsDriveLetterAndColon(zRelative+1)
       || winIsLongPathPrefix(zRelative+1)) ){
    zRelative++;
  }

#if defined(__CYGWIN__)
  SimulateIOError( return SQLITE_ERROR );
  UNUSED_PARAMETER(nFull);
  assert( nFull>=pVfs->mxPathname );
  if ( sqlite3_data_directory && !winIsVerbatimPathname(zRelative) ){
    /*
    ** NOTE: We are dealing with a relative path name and the data
    **       directory has been set.  Therefore, use it as the basis
    **       for converting the relative path name to an absolute
    **       one by prepending the data directory and a slash.
    */
    char *zOut = sqlite3MallocZero( pVfs->mxPathname+1 );
    if( !zOut ){
      return SQLITE_IOERR_NOMEM_BKPT;
    }
    if( cygwin_conv_path(
            (osIsNT() ? CCP_POSIX_TO_WIN_W : CCP_POSIX_TO_WIN_A) |
            CCP_RELATIVE, zRelative, zOut, pVfs->mxPathname+1)<0 ){
      sqlite3_free(zOut);
      return winLogError(SQLITE_CANTOPEN_CONVPATH, (DWORD)errno,
                         "winFullPathname1", zRelative);
    }else{
      char *zUtf8 = winConvertToUtf8Filename(zOut);
      if( !zUtf8 ){
        sqlite3_free(zOut);
        return SQLITE_IOERR_NOMEM_BKPT;
      }
      sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s%c%s",
                       sqlite3_data_directory, winGetDirSep(), zUtf8);
      sqlite3_free(zUtf8);
      sqlite3_free(zOut);
    }
  }else{
    char *zOut = sqlite3MallocZero( pVfs->mxPathname+1 );
    if( !zOut ){
      return SQLITE_IOERR_NOMEM_BKPT;
    }
    if( cygwin_conv_path(
            (osIsNT() ? CCP_POSIX_TO_WIN_W : CCP_POSIX_TO_WIN_A),
            zRelative, zOut, pVfs->mxPathname+1)<0 ){
      sqlite3_free(zOut);
      return winLogError(SQLITE_CANTOPEN_CONVPATH, (DWORD)errno,
                         "winFullPathname2", zRelative);
    }else{
      char *zUtf8 = winConvertToUtf8Filename(zOut);
      if( !zUtf8 ){
        sqlite3_free(zOut);
        return SQLITE_IOERR_NOMEM_BKPT;
      }
      sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s", zUtf8);
      sqlite3_free(zUtf8);
      sqlite3_free(zOut);
    }
  }
  return SQLITE_OK;
#endif

#if (SQLITE_OS_WINCE || SQLITE_OS_WINRT) && !defined(__CYGWIN__)
  SimulateIOError( return SQLITE_ERROR );
  /* WinCE has no concept of a relative pathname, or so I am told. */
  /* WinRT has no way to convert a relative path to an absolute one. */
  if ( sqlite3_data_directory && !winIsVerbatimPathname(zRelative) ){
    /*
    ** NOTE: We are dealing with a relative path name and the data
    **       directory has been set.  Therefore, use it as the basis
    **       for converting the relative path name to an absolute
    **       one by prepending the data directory and a backslash.
    */
    sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s%c%s",
                     sqlite3_data_directory, winGetDirSep(), zRelative);
  }else{
    sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s", zRelative);
  }
  return SQLITE_OK;
#endif

#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(__CYGWIN__)
  /* It's odd to simulate an io-error here, but really this is just
  ** using the io-error infrastructure to test that SQLite handles this
  ** function failing. This function could fail if, for example, the
  ** current working directory has been unlinked.
  */
  SimulateIOError( return SQLITE_ERROR );
  if ( sqlite3_data_directory && !winIsVerbatimPathname(zRelative) ){
    /*
    ** NOTE: We are dealing with a relative path name and the data
    **       directory has been set.  Therefore, use it as the basis
    **       for converting the relative path name to an absolute
    **       one by prepending the data directory and a backslash.
    */
    sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s%c%s",
                     sqlite3_data_directory, winGetDirSep(), zRelative);
    return SQLITE_OK;
  }
  zConverted = winConvertFromUtf8Filename(zRelative);
  if( zConverted==0 ){
    return SQLITE_IOERR_NOMEM_BKPT;
  }
  if( osIsNT() ){
    LPWSTR zTemp;
    nByte = osGetFullPathNameW((LPCWSTR)zConverted, 0, 0, 0);
    if( nByte==0 ){
      sqlite3_free(zConverted);
      return winLogError(SQLITE_CANTOPEN_FULLPATH, osGetLastError(),
                         "winFullPathname1", zRelative);
    }
    nByte += 3;
    zTemp = sqlite3MallocZero( nByte*sizeof(zTemp[0]) );
    if( zTemp==0 ){
      sqlite3_free(zConverted);
      return SQLITE_IOERR_NOMEM_BKPT;
    }
    nByte = osGetFullPathNameW((LPCWSTR)zConverted, nByte, zTemp, 0);
    if( nByte==0 ){
      sqlite3_free(zConverted);
      sqlite3_free(zTemp);
      return winLogError(SQLITE_CANTOPEN_FULLPATH, osGetLastError(),
                         "winFullPathname2", zRelative);
    }
    sqlite3_free(zConverted);
    zOut = winUnicodeToUtf8(zTemp);
    sqlite3_free(zTemp);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    char *zTemp;
    nByte = osGetFullPathNameA((char*)zConverted, 0, 0, 0);
    if( nByte==0 ){
      sqlite3_free(zConverted);
      return winLogError(SQLITE_CANTOPEN_FULLPATH, osGetLastError(),
                         "winFullPathname3", zRelative);
    }
    nByte += 3;
    zTemp = sqlite3MallocZero( nByte*sizeof(zTemp[0]) );
    if( zTemp==0 ){
      sqlite3_free(zConverted);
      return SQLITE_IOERR_NOMEM_BKPT;
    }
    nByte = osGetFullPathNameA((char*)zConverted, nByte, zTemp, 0);
    if( nByte==0 ){
      sqlite3_free(zConverted);
      sqlite3_free(zTemp);
      return winLogError(SQLITE_CANTOPEN_FULLPATH, osGetLastError(),
                         "winFullPathname4", zRelative);
    }
    sqlite3_free(zConverted);
    zOut = winMbcsToUtf8(zTemp, osAreFileApisANSI());
    sqlite3_free(zTemp);
  }
#endif
  if( zOut ){
    sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s", zOut);
    sqlite3_free(zOut);
    return SQLITE_OK;
  }else{
    return SQLITE_IOERR_NOMEM_BKPT;
  }
#endif
}
static int winFullPathname(
  sqlite3_vfs *pVfs,            /* Pointer to vfs object */
  const char *zRelative,        /* Possibly relative input path */
  int nFull,                    /* Size of output buffer in bytes */
  char *zFull                   /* Output buffer */
){
  int rc;
  MUTEX_LOGIC( sqlite3_mutex *pMutex; )
  MUTEX_LOGIC( pMutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_TEMPDIR); )
  sqlite3_mutex_enter(pMutex);
  rc = winFullPathnameNoMutex(pVfs, zRelative, nFull, zFull);
  sqlite3_mutex_leave(pMutex);
  return rc;
}

#ifndef SQLITE_OMIT_LOAD_EXTENSION
/*
** Interfaces for opening a shared library, finding entry points
** within the shared library, and closing the shared library.
*/
static void *winDlOpen(sqlite3_vfs *pVfs, const char *zFilename){
  HANDLE h;
#if defined(__CYGWIN__)
  int nFull = pVfs->mxPathname+1;
  char *zFull = sqlite3MallocZero( nFull );
  void *zConverted = 0;
  if( zFull==0 ){
    OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename, (void*)0));
    return 0;
  }
  if( winFullPathname(pVfs, zFilename, nFull, zFull)!=SQLITE_OK ){
    sqlite3_free(zFull);
    OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename, (void*)0));
    return 0;
  }
  zConverted = winConvertFromUtf8Filename(zFull);
  sqlite3_free(zFull);
#else
  void *zConverted = winConvertFromUtf8Filename(zFilename);
  UNUSED_PARAMETER(pVfs);
#endif
  if( zConverted==0 ){
    OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename, (void*)0));
    return 0;
  }
  if( osIsNT() ){
#if SQLITE_OS_WINRT
    h = osLoadPackagedLibrary((LPCWSTR)zConverted, 0);
#else
    h = osLoadLibraryW((LPCWSTR)zConverted);
#endif
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    h = osLoadLibraryA((char*)zConverted);
  }
#endif
  OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename, (void*)h));
  sqlite3_free(zConverted);
  return (void*)h;
}
static void winDlError(sqlite3_vfs *pVfs, int nBuf, char *zBufOut){
  UNUSED_PARAMETER(pVfs);
  winGetLastErrorMsg(osGetLastError(), nBuf, zBufOut);
}
static void (*winDlSym(sqlite3_vfs *pVfs,void *pH,const char *zSym))(void){
  FARPROC proc;
  UNUSED_PARAMETER(pVfs);
  proc = osGetProcAddressA((HANDLE)pH, zSym);
  OSTRACE(("DLSYM handle=%p, symbol=%s, address=%p\n",
           (void*)pH, zSym, (void*)proc));
  return (void(*)(void))proc;
}
static void winDlClose(sqlite3_vfs *pVfs, void *pHandle){
  UNUSED_PARAMETER(pVfs);
  osFreeLibrary((HANDLE)pHandle);
  OSTRACE(("DLCLOSE handle=%p\n", (void*)pHandle));
}
#else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */
  #define winDlOpen  0
  #define winDlError 0
  #define winDlSym   0
  #define winDlClose 0
#endif

/* State information for the randomness gatherer. */
typedef struct EntropyGatherer EntropyGatherer;
struct EntropyGatherer {
  unsigned char *a;   /* Gather entropy into this buffer */
  int na;             /* Size of a[] in bytes */
  int i;              /* XOR next input into a[i] */
  int nXor;           /* Number of XOR operations done */
};

#if !defined(SQLITE_TEST) && !defined(SQLITE_OMIT_RANDOMNESS)
/* Mix sz bytes of entropy into p. */
static void xorMemory(EntropyGatherer *p, unsigned char *x, int sz){
  int j, k;
  for(j=0, k=p->i; j<sz; j++){
    p->a[k++] ^= x[j];
    if( k>=p->na ) k = 0;
  }
  p->i = k;
  p->nXor += sz;
}
#endif /* !defined(SQLITE_TEST) && !defined(SQLITE_OMIT_RANDOMNESS) */

/*
** Write up to nBuf bytes of randomness into zBuf.
*/
static int winRandomness(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
#if defined(SQLITE_TEST) || defined(SQLITE_OMIT_RANDOMNESS)
  UNUSED_PARAMETER(pVfs);
  memset(zBuf, 0, nBuf);
  return nBuf;
#else
  EntropyGatherer e;
  UNUSED_PARAMETER(pVfs);
  memset(zBuf, 0, nBuf);
  e.a = (unsigned char*)zBuf;
  e.na = nBuf;
  e.nXor = 0;
  e.i = 0;
  {
    SYSTEMTIME x;
    osGetSystemTime(&x);
    xorMemory(&e, (unsigned char*)&x, sizeof(SYSTEMTIME));
  }
  {
    DWORD pid = osGetCurrentProcessId();
    xorMemory(&e, (unsigned char*)&pid, sizeof(DWORD));
  }
#if SQLITE_OS_WINRT
  {
    ULONGLONG cnt = osGetTickCount64();
    xorMemory(&e, (unsigned char*)&cnt, sizeof(ULONGLONG));
  }
#else
  {
    DWORD cnt = osGetTickCount();
    xorMemory(&e, (unsigned char*)&cnt, sizeof(DWORD));
  }
#endif /* SQLITE_OS_WINRT */
  {
    LARGE_INTEGER i;
    osQueryPerformanceCounter(&i);
    xorMemory(&e, (unsigned char*)&i, sizeof(LARGE_INTEGER));
  }
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
  {
    UUID id;
    memset(&id, 0, sizeof(UUID));
    osUuidCreate(&id);
    xorMemory(&e, (unsigned char*)&id, sizeof(UUID));
    memset(&id, 0, sizeof(UUID));
    osUuidCreateSequential(&id);
    xorMemory(&e, (unsigned char*)&id, sizeof(UUID));
  }
#endif /* !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID */
  return e.nXor>nBuf ? nBuf : e.nXor;
#endif /* defined(SQLITE_TEST) || defined(SQLITE_OMIT_RANDOMNESS) */
}


/*
** Sleep for a little while.  Return the amount of time slept.
*/
static int winSleep(sqlite3_vfs *pVfs, int microsec){
  sqlite3_win32_sleep((microsec+999)/1000);
  UNUSED_PARAMETER(pVfs);
  return ((microsec+999)/1000)*1000;
}

/*
** The following variable, if set to a non-zero value, is interpreted as
** the number of seconds since 1970 and is used to set the result of
** sqlite3OsCurrentTime() during testing.
*/
#ifdef SQLITE_TEST
int sqlite3_current_time = 0;  /* Fake system time in seconds since 1970. */
#endif

/*
** Find the current time (in Universal Coordinated Time).  Write into *piNow
** the current time and date as a Julian Day number times 86_400_000.  In
** other words, write into *piNow the number of milliseconds since the Julian
** epoch of noon in Greenwich on November 24, 4714 B.C according to the
** proleptic Gregorian calendar.
**
** On success, return SQLITE_OK.  Return SQLITE_ERROR if the time and date
** cannot be found.
*/
static int winCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *piNow){
  /* FILETIME structure is a 64-bit value representing the number of
     100-nanosecond intervals since January 1, 1601 (= JD 2305813.5).
  */
  FILETIME ft;
  static const sqlite3_int64 winFiletimeEpoch = 23058135*(sqlite3_int64)8640000;
#ifdef SQLITE_TEST
  static const sqlite3_int64 unixEpoch = 24405875*(sqlite3_int64)8640000;
#endif
  /* 2^32 - to avoid use of LL and warnings in gcc */
  static const sqlite3_int64 max32BitValue =
      (sqlite3_int64)2000000000 + (sqlite3_int64)2000000000 +
      (sqlite3_int64)294967296;

#if SQLITE_OS_WINCE
  SYSTEMTIME time;
  osGetSystemTime(&time);
  /* if SystemTimeToFileTime() fails, it returns zero. */
  if (!osSystemTimeToFileTime(&time,&ft)){
    return SQLITE_ERROR;
  }
#else
  osGetSystemTimeAsFileTime( &ft );
#endif

  *piNow = winFiletimeEpoch +
            ((((sqlite3_int64)ft.dwHighDateTime)*max32BitValue) +
               (sqlite3_int64)ft.dwLowDateTime)/(sqlite3_int64)10000;

#ifdef SQLITE_TEST
  if( sqlite3_current_time ){
    *piNow = 1000*(sqlite3_int64)sqlite3_current_time + unixEpoch;
  }
#endif
  UNUSED_PARAMETER(pVfs);
  return SQLITE_OK;
}

/*
** Find the current time (in Universal Coordinated Time).  Write the
** current time and date as a Julian Day number into *prNow and
** return 0.  Return 1 if the time and date cannot be found.
*/
static int winCurrentTime(sqlite3_vfs *pVfs, double *prNow){
  int rc;
  sqlite3_int64 i;
  rc = winCurrentTimeInt64(pVfs, &i);
  if( !rc ){
    *prNow = i/86400000.0;
  }
  return rc;
}

/*
** The idea is that this function works like a combination of
** GetLastError() and FormatMessage() on Windows (or errno and
** strerror_r() on Unix). After an error is returned by an OS
** function, SQLite calls this function with zBuf pointing to
** a buffer of nBuf bytes. The OS layer should populate the
** buffer with a nul-terminated UTF-8 encoded error message
** describing the last IO error to have occurred within the calling
** thread.
**
** If the error message is too large for the supplied buffer,
** it should be truncated. The return value of xGetLastError
** is zero if the error message fits in the buffer, or non-zero
** otherwise (if the message was truncated). If non-zero is returned,
** then it is not necessary to include the nul-terminator character
** in the output buffer.
**
** Not supplying an error message will have no adverse effect
** on SQLite. It is fine to have an implementation that never
** returns an error message:
**
**   int xGetLastError(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
**     assert(zBuf[0]=='\0');
**     return 0;
**   }
**
** However if an error message is supplied, it will be incorporated
** by sqlite into the error message available to the user using
** sqlite3_errmsg(), possibly making IO errors easier to debug.
*/
static int winGetLastError(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
  DWORD e = osGetLastError();
  UNUSED_PARAMETER(pVfs);
  if( nBuf>0 ) winGetLastErrorMsg(e, nBuf, zBuf);
  return e;
}

/*
** Initialize and deinitialize the operating system interface.
*/
int sqlite3_os_init(void){
  static sqlite3_vfs winVfs = {
    3,                     /* iVersion */
    sizeof(winFile),       /* szOsFile */
    SQLITE_WIN32_MAX_PATH_BYTES, /* mxPathname */
    0,                     /* pNext */
    "win32",               /* zName */
    &winAppData,           /* pAppData */
    winOpen,               /* xOpen */
    winDelete,             /* xDelete */
    winAccess,             /* xAccess */
    winFullPathname,       /* xFullPathname */
    winDlOpen,             /* xDlOpen */
    winDlError,            /* xDlError */
    winDlSym,              /* xDlSym */
    winDlClose,            /* xDlClose */
    winRandomness,         /* xRandomness */
    winSleep,              /* xSleep */
    winCurrentTime,        /* xCurrentTime */
    winGetLastError,       /* xGetLastError */
    winCurrentTimeInt64,   /* xCurrentTimeInt64 */
    winSetSystemCall,      /* xSetSystemCall */
    winGetSystemCall,      /* xGetSystemCall */
    winNextSystemCall,     /* xNextSystemCall */
  };
#if defined(SQLITE_WIN32_HAS_WIDE)
  static sqlite3_vfs winLongPathVfs = {
    3,                     /* iVersion */
    sizeof(winFile),       /* szOsFile */
    SQLITE_WINNT_MAX_PATH_BYTES, /* mxPathname */
    0,                     /* pNext */
    "win32-longpath",      /* zName */
    &winAppData,           /* pAppData */
    winOpen,               /* xOpen */
    winDelete,             /* xDelete */
    winAccess,             /* xAccess */
    winFullPathname,       /* xFullPathname */
    winDlOpen,             /* xDlOpen */
    winDlError,            /* xDlError */
    winDlSym,              /* xDlSym */
    winDlClose,            /* xDlClose */
    winRandomness,         /* xRandomness */
    winSleep,              /* xSleep */
    winCurrentTime,        /* xCurrentTime */
    winGetLastError,       /* xGetLastError */
    winCurrentTimeInt64,   /* xCurrentTimeInt64 */
    winSetSystemCall,      /* xSetSystemCall */
    winGetSystemCall,      /* xGetSystemCall */
    winNextSystemCall,     /* xNextSystemCall */
  };
#endif
  static sqlite3_vfs winNolockVfs = {
    3,                     /* iVersion */
    sizeof(winFile),       /* szOsFile */
    SQLITE_WIN32_MAX_PATH_BYTES, /* mxPathname */
    0,                     /* pNext */
    "win32-none",          /* zName */
    &winNolockAppData,     /* pAppData */
    winOpen,               /* xOpen */
    winDelete,             /* xDelete */
    winAccess,             /* xAccess */
    winFullPathname,       /* xFullPathname */
    winDlOpen,             /* xDlOpen */
    winDlError,            /* xDlError */
    winDlSym,              /* xDlSym */
    winDlClose,            /* xDlClose */
    winRandomness,         /* xRandomness */
    winSleep,              /* xSleep */
    winCurrentTime,        /* xCurrentTime */
    winGetLastError,       /* xGetLastError */
    winCurrentTimeInt64,   /* xCurrentTimeInt64 */
    winSetSystemCall,      /* xSetSystemCall */
    winGetSystemCall,      /* xGetSystemCall */
    winNextSystemCall,     /* xNextSystemCall */
  };
#if defined(SQLITE_WIN32_HAS_WIDE)
  static sqlite3_vfs winLongPathNolockVfs = {
    3,                     /* iVersion */
    sizeof(winFile),       /* szOsFile */
    SQLITE_WINNT_MAX_PATH_BYTES, /* mxPathname */
    0,                     /* pNext */
    "win32-longpath-none", /* zName */
    &winNolockAppData,     /* pAppData */
    winOpen,               /* xOpen */
    winDelete,             /* xDelete */
    winAccess,             /* xAccess */
    winFullPathname,       /* xFullPathname */
    winDlOpen,             /* xDlOpen */
    winDlError,            /* xDlError */
    winDlSym,              /* xDlSym */
    winDlClose,            /* xDlClose */
    winRandomness,         /* xRandomness */
    winSleep,              /* xSleep */
    winCurrentTime,        /* xCurrentTime */
    winGetLastError,       /* xGetLastError */
    winCurrentTimeInt64,   /* xCurrentTimeInt64 */
    winSetSystemCall,      /* xSetSystemCall */
    winGetSystemCall,      /* xGetSystemCall */
    winNextSystemCall,     /* xNextSystemCall */
  };
#endif

  /* Double-check that the aSyscall[] array has been constructed
  ** correctly.  See ticket [bb3a86e890c8e96ab] */
  assert( ArraySize(aSyscall)==80 );

  /* get memory map allocation granularity */
  memset(&winSysInfo, 0, sizeof(SYSTEM_INFO));
#if SQLITE_OS_WINRT
  osGetNativeSystemInfo(&winSysInfo);
#else
  osGetSystemInfo(&winSysInfo);
#endif
  assert( winSysInfo.dwAllocationGranularity>0 );
  assert( winSysInfo.dwPageSize>0 );

  sqlite3_vfs_register(&winVfs, 1);

#if defined(SQLITE_WIN32_HAS_WIDE)
  sqlite3_vfs_register(&winLongPathVfs, 0);
#endif

  sqlite3_vfs_register(&winNolockVfs, 0);

#if defined(SQLITE_WIN32_HAS_WIDE)
  sqlite3_vfs_register(&winLongPathNolockVfs, 0);
#endif

#ifndef SQLITE_OMIT_WAL
  winBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1);
#endif

  return SQLITE_OK;
}

int sqlite3_os_end(void){
#if SQLITE_OS_WINRT
  if( sleepObj!=NULL ){
    osCloseHandle(sleepObj);
    sleepObj = NULL;
  }
#endif

#ifndef SQLITE_OMIT_WAL
  winBigLock = 0;
#endif

  return SQLITE_OK;
}

#endif /* SQLITE_OS_WIN */