SQLite

  $(TOP)\src\test_vfs.c \
  $(TOP)\src\test_windirent.c \
  $(TOP)\src\test_window.c \
  $(TOP)\src\test_wsd.c \
  $(TOP)\ext\fts3\fts3_term.c \
  $(TOP)\ext\fts3\fts3_test.c \
  $(TOP)\ext\rbu\test_rbu.c \
  $(TOP)\ext\session\test_session.c
  $(TOP)\ext\session\test_session.c \
  $(TOP)\ext\session\sqlite3changebatch.c 

# Statically linked extensions.
#
TESTEXT = \
  $(TOP)\ext\expert\sqlite3expert.c \
  $(TOP)\ext\expert\test_expert.c \
  $(TOP)\ext\misc\amatch.c \

Begin Concurrent
================

## Overview

Usually, SQLite allows at most one writer to proceed concurrently. The
BEGIN CONCURRENT enhancement allows multiple writers to process write
transactions simultanously if the database is in "wal" or "wal2" mode,
although the system still serializes COMMIT commands.

When a write-transaction is opened with "BEGIN CONCURRENT", actually 
locking the database is deferred until a COMMIT is executed. This means
that any number of transactions started with BEGIN CONCURRENT may proceed
concurrently. The system uses optimistic page-level-locking to prevent
conflicting concurrent transactions from being committed.

When a BEGIN CONCURRENT transaction is committed, the system checks whether 
or not any of the database pages that the transaction has read have been
modified since the BEGIN CONCURRENT was opened. In other words - it asks 
if the transaction being committed operates on a different set of data than
all other concurrently executing transactions. If the answer is "yes, this
transaction did not read or modify any data modified by any concurrent
transaction", then the transaction is committed as normal. Otherwise, if the
transaction does conflict, it cannot be committed and an SQLITE_BUSY_SNAPSHOT
error is returned. At this point, all the client can do is ROLLBACK the
transaction.

If SQLITE_BUSY_SNAPSHOT is returned, messages are output via the sqlite3_log
mechanism indicating the page and table or index on which the conflict
occurred. This can be useful when optimizing concurrency.

## Application Programming Notes

In order to serialize COMMIT processing, SQLite takes a lock on the database
as part of each COMMIT command and releases it before returning. At most one
writer may hold this lock at any one time. If a writer cannot obtain the lock,
it uses SQLite's busy-handler to pause and retry for a while:

  <a href=https://www.sqlite.org/c3ref/busy_handler.html>
      https://www.sqlite.org/c3ref/busy_handler.html
  </a>

If there is significant contention for the writer lock, this mechanism can be
inefficient. In this case it is better for the application to use a mutex or
some other mechanism that supports blocking to ensure that at most one writer
is attempting to COMMIT a BEGIN CONCURRENT transaction at a time. This is
usually easier if all writers are part of the same operating system process.

If all database clients (readers and writers) are located in the same OS
process, and if that OS is a Unix variant, then it can be more efficient to
the built-in VFS "unix-excl" instead of the default "unix". This is because it
uses more efficient locking primitives.

The key to maximizing concurrency using BEGIN CONCURRENT is to ensure that
there are a large number of non-conflicting transactions. In SQLite, each
table and each index is stored as a separate b-tree, each of which is
distributed over a discrete set of database pages. This means that:

  * Two transactions that write to different sets of tables never 
    conflict, and that

  * Two transactions that write to the same tables or indexes only 
    conflict if the values of the keys (either primary keys or indexed 
    rows) are fairly close together. For example, given a large 
    table with the schema:

      <pre>     CREATE TABLE t1(a INTEGER PRIMARY KEY, b BLOB);</pre>

    writing two rows with adjacent values for "a" probably will cause a
    conflict (as the two keys are stored on the same page), but writing two
    rows with vastly different values for "a" will not (as the keys will likly
    be stored on different pages).

Note that, in SQLite, if values are not explicitly supplied for an INTEGER
PRIMARY KEY, as for example in:

>
     INSERT INTO t1(b) VALUES(<blob-value>);

then monotonically increasing values are assigned automatically. This is
terrible for concurrency, as it all but ensures that all new rows are 
added to the same database page. In such situations, it is better to
explicitly assign random values to INTEGER PRIMARY KEY fields.

This problem also comes up for non-WITHOUT ROWID tables that do not have an
explicit INTEGER PRIMARY KEY column. In these cases each table has an implicit
INTEGER PRIMARY KEY column that is assigned increasing values, leading to the
same problem as omitting to assign a value to an explicit INTEGER PRIMARY KEY
column.

For both explicit and implicit INTEGER PRIMARY KEYs, it is possible to have
SQLite assign values at random (instead of the monotonically increasing
values) by writing a row with a rowid equal to the largest possible signed
64-bit integer to the table. For example:

     INSERT INTO t1(a) VALUES(9223372036854775807);

Applications should take care not to malfunction due to the presence of such
rows.

The nature of some types of indexes, for example indexes on timestamp fields,
can also cause problems (as concurrent transactions may assign similar
timestamps that will be stored on the same db page to new records). In these
cases the database schema may need to be rethought to increase the concurrency
provided by page-level-locking.

# 2016 August 23
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.
#

if {![info exists testdir]} {
  set testdir [file join [file dirname [info script]] .. .. test]
} 
source $testdir/tester.tcl
ifcapable !session {finish_test; return}

set testprefix changebatch1


proc sql_to_changeset {method sql} {
  sqlite3session S db main
  S attach *
  execsql $sql
  set ret [S $method]
  S delete
  return $ret
}

proc do_changebatch_test {tn method args} {
  set C [list]
  foreach a $args {
    lappend C [sql_to_changeset $method $a]
  }

  sqlite3changebatch cb db
  set i 1
  foreach ::cs [lrange $C 0 end-1] {
    set rc [cb add $::cs]
    if {$rc!="SQLITE_OK"} { error "expected SQLITE_OK, got $rc (i=$i)" }
    incr i
  }

  set ::cs [lindex $C end]
  do_test $tn { cb add [set ::cs] } SQLITE_CONSTRAINT
  cb delete
}

proc do_changebatch_test1 {tn args} {
  uplevel do_changebatch_test $tn changeset $args
}
proc do_changebatch_test2 {tn args} {
  uplevel do_changebatch_test $tn fullchangeset $args
}

#-------------------------------------------------------------------------
# The body of the following loop contains tests for database schemas
# that do not feature multi-column UNIQUE constraints. In this case
# it doesn't matter if the changesets are generated using
# sqlite3session_changeset() or sqlite3session_fullchangeset().
#
foreach {tn testfunction} {
  1 do_changebatch_test1
  2 do_changebatch_test2
} {
  reset_db

  #-------------------------------------------------------------------------
  #
  do_execsql_test $tn.1.0 {
    CREATE TABLE t1(a PRIMARY KEY, b);
  }
  
  $testfunction $tn.1.1 {
    INSERT INTO t1 VALUES(1, 1);
  } {
    DELETE FROM t1 WHERE a=1;
  }
  
  do_execsql_test $tn.1.2.0 {
    INSERT INTO t1 VALUES(1, 1);
    INSERT INTO t1 VALUES(2, 2);
    INSERT INTO t1 VALUES(3, 3);
  }
  $testfunction $tn.1.2.1 {
    DELETE FROM t1 WHERE a=2;
  } {
    INSERT INTO t1 VALUES(2, 2);
  }
  
  #-------------------------------------------------------------------------
  #
  do_execsql_test $tn.2.0 {
    CREATE TABLE x1(a, b PRIMARY KEY, c UNIQUE);
    CREATE TABLE x2(a PRIMARY KEY, b UNIQUE, c UNIQUE);
    CREATE INDEX x1a ON x1(a);
  
    INSERT INTO x1 VALUES(1, 1, 'a');
    INSERT INTO x1 VALUES(1, 2, 'b');
    INSERT INTO x1 VALUES(1, 3, 'c');
  }
  
  $testfunction $tn.2.1 {
    DELETE FROM x1 WHERE b=2;
  } {
    UPDATE x1 SET c='b' WHERE b=3;
  }
  
  $testfunction $tn.2.2 {
    DELETE FROM x1 WHERE b=1;
  } {
    INSERT INTO x1 VALUES(1, 5, 'a');
  }

  set L [list]
  for {set i 1000} {$i < 10000} {incr i} {
    lappend L "INSERT INTO x2 VALUES($i, $i, 'x' || $i)"
  }
  lappend L "DELETE FROM x2 WHERE b=1005"
  $testfunction $tn.2.3 {*}$L

  execsql { INSERT INTO x1 VALUES('f', 'f', 'f') }
  $testfunction $tn.2.4 {
    INSERT INTO x2 VALUES('f', 'f', 'f');
  } {
    INSERT INTO x1 VALUES('g', 'g', 'g');
  } {
    DELETE FROM x1 WHERE b='f';
  } {
    INSERT INTO x2 VALUES('g', 'g', 'g');
  } {
    INSERT INTO x1 VALUES('f', 'f', 'f');
  }

  execsql {
    DELETE FROM x1;
    INSERT INTO x1 VALUES(1.5, 1.5, 1.5);
  }
  $testfunction $tn.2.5 {
    DELETE FROM x1 WHERE b BETWEEN 1 AND 2;
  } {
    INSERT INTO x1 VALUES(2.5, 2.5, 2.5);
  } {
    INSERT INTO x1 VALUES(1.5, 1.5, 1.5);
  }

  execsql {
    DELETE FROM x2;
    INSERT INTO x2 VALUES(X'abcd', X'1234', X'7890');
    INSERT INTO x2 VALUES(X'0000', X'0000', X'0000');
  }
  breakpoint
  $testfunction $tn.2.6 {
    UPDATE x2 SET c = X'1234' WHERE a=X'abcd';
    INSERT INTO x2 VALUES(X'1234', X'abcd', X'7890');
  } {
    DELETE FROM x2 WHERE b=X'0000';
  } {
    INSERT INTO x2 VALUES(1, X'0000', NULL);
  }
}

#-------------------------------------------------------------------------
# Test some multi-column UNIQUE constraints. First Using _changeset() to
# demonstrate the problem, then using _fullchangeset() to show that it has
# been fixed.
#
reset_db
do_execsql_test 3.0 {
  CREATE TABLE y1(a PRIMARY KEY, b, c, UNIQUE(b, c));
  INSERT INTO y1 VALUES(1, 1, 1);
  INSERT INTO y1 VALUES(2, 2, 2);
  INSERT INTO y1 VALUES(3, 3, 3);
  INSERT INTO y1 VALUES(4, 3, 4);
  BEGIN;
}

do_test 3.1.1 {
  set c1 [sql_to_changeset changeset { DELETE FROM y1 WHERE a=4    }]
  set c2 [sql_to_changeset changeset { UPDATE y1 SET c=4 WHERE a=3 }]
  sqlite3changebatch cb db
  cb add $c1
  cb add $c2
} {SQLITE_OK}
do_test 3.1.2 {
  cb delete
  execsql ROLLBACK
} {}

do_test 3.1.1 {
  set c1 [sql_to_changeset fullchangeset { DELETE FROM y1 WHERE a=4    }]
  set c2 [sql_to_changeset fullchangeset { UPDATE y1 SET c=4 WHERE a=3 }]
  sqlite3changebatch cb db
  cb add $c1
  cb add $c2
} {SQLITE_OK}
do_test 3.1.2 {
  cb delete
} {}

#-------------------------------------------------------------------------
#
reset_db
do_execsql_test 4.0 {
  CREATE TABLE t1(x, y, z, PRIMARY KEY(x, y), UNIQUE(z));
}

do_test 4.1 {
  set c1 [sql_to_changeset fullchangeset { INSERT INTO t1 VALUES(1, 2, 3) }]
  execsql {
    DROP TABLE t1;
    CREATE TABLE t1(w, x, y, z, PRIMARY KEY(x, y), UNIQUE(z));
  }
  sqlite3changebatch cb db
  list [catch { cb add $c1 } msg] $msg
} {1 SQLITE_RANGE}

cb delete

finish_test

# 2011 Mar 21
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# The focus of this file is testing the session module.
#

if {![info exists testdir]} {
  set testdir [file join [file dirname [info script]] .. .. test]
} 
source [file join [file dirname [info script]] session_common.tcl]
source $testdir/tester.tcl
ifcapable !session {finish_test; return}
set testprefix changebatchfault

do_execsql_test 1.0 {
  CREATE TABLE t1(a, b, c PRIMARY KEY, UNIQUE(a, b));
  INSERT INTO t1 VALUES('a', 'a', 'a');
  INSERT INTO t1 VALUES('b', 'b', 'b');
}

set ::c1 [changeset_from_sql { delete from t1 where c='a' }]
set ::c2 [changeset_from_sql { insert into t1 values('c', 'c', 'c') }]

do_faultsim_test 1 -faults oom-* -body {
  sqlite3changebatch cb db
  cb add $::c1
  cb add $::c2
} -test {
  faultsim_test_result {0 SQLITE_OK} {1 SQLITE_NOMEM}
  catch { cb delete }
}


finish_test

  do_common_sql {
    CREATE TABLE t1(a, b, c, PRIMARY KEY(a, b));
  }
  do_then_apply_sql -ignorenoop {
    WITH s(i) AS (
      VALUES(1) UNION ALL SELECT i+1 FROM s WHERe i<10000
    )
    INSERT INTO t1 SELECT 'abcde', randomblob(16), i FROM s;
    INSERT INTO t1 SELECT 'abcde', randomblob(18), i FROM s;
  }
  compare_db db db2
} {}

#------------------------------------------------------------------------
db2 close
reset_db

#if !defined(SQLITE_TEST) || (defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK))

#include "sqlite3session.h"
#include "sqlite3changebatch.h"

#include <assert.h>
#include <string.h>

typedef struct BatchTable BatchTable;
typedef struct BatchIndex BatchIndex;
typedef struct BatchIndexEntry BatchIndexEntry;
typedef struct BatchHash BatchHash;

struct sqlite3_changebatch {
  sqlite3 *db;                    /* Database handle used to read schema */
  BatchTable *pTab;               /* First in linked list of tables */
  int iChangesetId;               /* Current changeset id */
  int iNextIdxId;                 /* Next available index id */
  int nEntry;                     /* Number of entries in hash table */
  int nHash;                      /* Number of hash buckets */
  BatchIndexEntry **apHash;       /* Array of hash buckets */
};

struct BatchTable {
  BatchIndex *pIdx;               /* First in linked list of UNIQUE indexes */
  BatchTable *pNext;              /* Next table */
  char zTab[1];                   /* Table name */
};

struct BatchIndex {
  BatchIndex *pNext;              /* Next index on same table */
  int iId;                        /* Index id (assigned internally) */
  int bPk;                        /* True for PK index */
  int nCol;                       /* Size of aiCol[] array */
  int *aiCol;                     /* Array of columns that make up index */
};

struct BatchIndexEntry {
  BatchIndexEntry *pNext;         /* Next colliding hash table entry */
  int iChangesetId;               /* Id of associated changeset */
  int iIdxId;                     /* Id of index this key is from */
  int szRecord;
  char aRecord[1];
};

/*
** Allocate and zero a block of nByte bytes. Must be freed using cbFree().
*/
static void *cbMalloc(int *pRc, int nByte){
  void *pRet;

  if( *pRc ){
    pRet = 0;
  }else{
    pRet = sqlite3_malloc(nByte);
    if( pRet ){
      memset(pRet, 0, nByte);
    }else{
      *pRc = SQLITE_NOMEM;
    }
  }

  return pRet;
}

/*
** Free an allocation made by cbMalloc().
*/
static void cbFree(void *p){
  sqlite3_free(p);
}

/*
** Return the hash bucket that pEntry belongs in.
*/
static int cbHash(sqlite3_changebatch *p, BatchIndexEntry *pEntry){
  unsigned int iHash = (unsigned int)pEntry->iIdxId;
  unsigned char *pEnd = (unsigned char*)&pEntry->aRecord[pEntry->szRecord];
  unsigned char *pIter;

  for(pIter=(unsigned char*)pEntry->aRecord; pIter<pEnd; pIter++){
    iHash += (iHash << 7) + *pIter;
  }

  return (int)(iHash % p->nHash);
}

/*
** Resize the hash table.
*/
static int cbHashResize(sqlite3_changebatch *p){
  int rc = SQLITE_OK;
  BatchIndexEntry **apNew;
  int nNew = (p->nHash ? p->nHash*2 : 512);
  int i;

  apNew = cbMalloc(&rc, sizeof(BatchIndexEntry*) * nNew);
  if( rc==SQLITE_OK ){
    int nHash = p->nHash;
    p->nHash = nNew;
    for(i=0; i<nHash; i++){
      BatchIndexEntry *pEntry;
      while( (pEntry=p->apHash[i])!=0 ){
        int iHash = cbHash(p, pEntry);
        p->apHash[i] = pEntry->pNext;
        pEntry->pNext = apNew[iHash];
        apNew[iHash] = pEntry;
      }
    }

    cbFree(p->apHash);
    p->apHash = apNew;
  }

  return rc;
}


/*
** Allocate a new sqlite3_changebatch object.
*/
int sqlite3changebatch_new(sqlite3 *db, sqlite3_changebatch **pp){
  sqlite3_changebatch *pRet;
  int rc = SQLITE_OK;
  *pp = pRet = (sqlite3_changebatch*)cbMalloc(&rc, sizeof(sqlite3_changebatch));
  if( pRet ){
    pRet->db = db;
  }
  return rc;
}

/*
** Add a BatchIndex entry for index zIdx to table pTab.
*/
static int cbAddIndex(
  sqlite3_changebatch *p, 
  BatchTable *pTab, 
  const char *zIdx, 
  int bPk
){
  int nCol = 0;
  sqlite3_stmt *pIndexInfo = 0;
  BatchIndex *pNew = 0;
  int rc;
  char *zIndexInfo;

  zIndexInfo = (char*)sqlite3_mprintf("PRAGMA main.index_info = %Q", zIdx);
  if( zIndexInfo ){
    rc = sqlite3_prepare_v2(p->db, zIndexInfo, -1, &pIndexInfo, 0);
    sqlite3_free(zIndexInfo);
  }else{
    rc = SQLITE_NOMEM;
  }

  if( rc==SQLITE_OK ){
    while( SQLITE_ROW==sqlite3_step(pIndexInfo) ){ nCol++; }
    rc = sqlite3_reset(pIndexInfo);
  }

  pNew = (BatchIndex*)cbMalloc(&rc, sizeof(BatchIndex) + sizeof(int) * nCol);
  if( rc==SQLITE_OK ){
    pNew->nCol = nCol;
    pNew->bPk = bPk;
    pNew->aiCol = (int*)&pNew[1];
    pNew->iId = p->iNextIdxId++;
    while( SQLITE_ROW==sqlite3_step(pIndexInfo) ){ 
      int i = sqlite3_column_int(pIndexInfo, 0);
      int j = sqlite3_column_int(pIndexInfo, 1);
      pNew->aiCol[i] = j;
    }
    rc = sqlite3_reset(pIndexInfo);
  }

  if( rc==SQLITE_OK ){
    pNew->pNext = pTab->pIdx;
    pTab->pIdx = pNew;
  }else{
    cbFree(pNew);
  }
  sqlite3_finalize(pIndexInfo);

  return rc;
}

/*
** Free the object passed as the first argument.
*/
static void cbFreeTable(BatchTable *pTab){
  BatchIndex *pIdx;
  BatchIndex *pIdxNext;
  for(pIdx=pTab->pIdx; pIdx; pIdx=pIdxNext){
    pIdxNext = pIdx->pNext;
    cbFree(pIdx);
  }
  cbFree(pTab);
}

/*
** Find or create the BatchTable object named zTab.
*/
static int cbFindTable(
  sqlite3_changebatch *p, 
  const char *zTab, 
  BatchTable **ppTab
){
  BatchTable *pRet = 0;
  int rc = SQLITE_OK;

  for(pRet=p->pTab; pRet; pRet=pRet->pNext){
    if( 0==sqlite3_stricmp(zTab, pRet->zTab) ) break;
  }

  if( pRet==0 ){
    int nTab = strlen(zTab);
    pRet = (BatchTable*)cbMalloc(&rc, nTab + sizeof(BatchTable));
    if( pRet ){
      sqlite3_stmt *pIndexList = 0;
      char *zIndexList = 0;
      int rc2;
      memcpy(pRet->zTab, zTab, nTab);

      zIndexList = sqlite3_mprintf("PRAGMA main.index_list = %Q", zTab);
      if( zIndexList==0 ){
        rc = SQLITE_NOMEM;
      }else{
        rc = sqlite3_prepare_v2(p->db, zIndexList, -1, &pIndexList, 0);
        sqlite3_free(zIndexList);
      }

      while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pIndexList) ){
        if( sqlite3_column_int(pIndexList, 2) ){
          const char *zIdx = (const char*)sqlite3_column_text(pIndexList, 1);
          const char *zTyp = (const char*)sqlite3_column_text(pIndexList, 3);
          rc = cbAddIndex(p, pRet, zIdx, (zTyp[0]=='p'));
        }
      }
      rc2 = sqlite3_finalize(pIndexList);
      if( rc==SQLITE_OK ) rc = rc2;

      if( rc==SQLITE_OK ){
        pRet->pNext = p->pTab;
        p->pTab = pRet;
      }else{
        cbFreeTable(pRet);
        pRet = 0;
      }
    }
  }

  *ppTab = pRet;
  return rc;
}

/*
** Extract value iVal from the changeset iterator passed as the first
** argument. Set *ppVal to point to the value before returning.
**
** This function attempts to extract the value using function xVal
** (which is always either sqlite3changeset_new or sqlite3changeset_old).
** If the call returns SQLITE_OK but does not supply an sqlite3_value*
** pointer, an attempt to extract the value is made using the xFallback 
** function.
*/
static int cbGetChangesetValue(
  sqlite3_changeset_iter *pIter, 
  int (*xVal)(sqlite3_changeset_iter*,int,sqlite3_value**),
  int (*xFallback)(sqlite3_changeset_iter*,int,sqlite3_value**),
  int iVal,
  sqlite3_value **ppVal
){
  int rc = xVal(pIter, iVal, ppVal);
  if( rc==SQLITE_OK && *ppVal==0 && xFallback ){
    rc = xFallback(pIter, iVal, ppVal);
  }
  return rc;
}

static int cbAddToHash(
  sqlite3_changebatch *p, 
  sqlite3_changeset_iter *pIter, 
  BatchIndex *pIdx, 
  int (*xVal)(sqlite3_changeset_iter*,int,sqlite3_value**),
  int (*xFallback)(sqlite3_changeset_iter*,int,sqlite3_value**),
  int *pbConf
){
  BatchIndexEntry *pNew;
  int sz = pIdx->nCol;
  int i;
  int iOut = 0;
  int rc = SQLITE_OK;

  for(i=0; rc==SQLITE_OK && i<pIdx->nCol; i++){
    sqlite3_value *pVal;
    rc = cbGetChangesetValue(pIter, xVal, xFallback, pIdx->aiCol[i], &pVal);
    if( rc==SQLITE_OK ){
      int eType = 0;
      if( pVal ) eType = sqlite3_value_type(pVal);
      switch( eType ){
        case 0:
        case SQLITE_NULL:
          return SQLITE_OK;

        case SQLITE_INTEGER:
          sz += 8;
          break;
        case SQLITE_FLOAT:
          sz += 8;
          break;

        default:
          assert( eType==SQLITE_TEXT || eType==SQLITE_BLOB );
          sz += sqlite3_value_bytes(pVal);
          break;
      }
    }
  }

  pNew = cbMalloc(&rc, sizeof(BatchIndexEntry) + sz);
  if( pNew ){
    pNew->iChangesetId = p->iChangesetId;
    pNew->iIdxId = pIdx->iId;
    pNew->szRecord = sz;

    for(i=0; i<pIdx->nCol; i++){
      int eType;
      sqlite3_value *pVal;
      rc = cbGetChangesetValue(pIter, xVal, xFallback, pIdx->aiCol[i], &pVal);
      if( rc!=SQLITE_OK ) break;  /* coverage: condition is never true */
      eType = sqlite3_value_type(pVal);
      pNew->aRecord[iOut++] = eType;
      switch( eType ){
        case SQLITE_INTEGER: {
          sqlite3_int64 i64 = sqlite3_value_int64(pVal);
          memcpy(&pNew->aRecord[iOut], &i64, 8);
          iOut += 8;
          break;
        }
        case SQLITE_FLOAT: {
          double d64 = sqlite3_value_double(pVal);
          memcpy(&pNew->aRecord[iOut], &d64, sizeof(double));
          iOut += sizeof(double);
          break;
        }

        default: {
          int nByte = sqlite3_value_bytes(pVal);
          const char *z = (const char*)sqlite3_value_blob(pVal);
          memcpy(&pNew->aRecord[iOut], z, nByte);
          iOut += nByte;
          break;
        }
      }
    }
  }

  if( rc==SQLITE_OK && p->nEntry>=(p->nHash/2) ){
    rc = cbHashResize(p);
  }

  if( rc==SQLITE_OK ){
    BatchIndexEntry *pIter;
    int iHash = cbHash(p, pNew);

    assert( iHash>=0 && iHash<p->nHash );
    for(pIter=p->apHash[iHash]; pIter; pIter=pIter->pNext){
      if( pNew->szRecord==pIter->szRecord 
       && 0==memcmp(pNew->aRecord, pIter->aRecord, pNew->szRecord)
      ){
        if( pNew->iChangesetId!=pIter->iChangesetId ){
          *pbConf = 1;
        }
        cbFree(pNew);
        pNew = 0;
        break;
      }
    }

    if( pNew ){
      pNew->pNext = p->apHash[iHash];
      p->apHash[iHash] = pNew;
      p->nEntry++;
    }
  }else{
    cbFree(pNew);
  }

  return rc;
}


/*
** Add a changeset to the current batch.
*/
int sqlite3changebatch_add(sqlite3_changebatch *p, void *pBuf, int nBuf){
  sqlite3_changeset_iter *pIter;  /* Iterator opened on pBuf/nBuf */
  int rc;                         /* Return code */
  int bConf = 0;                  /* Conflict was detected */

  rc = sqlite3changeset_start(&pIter, nBuf, pBuf);
  if( rc==SQLITE_OK ){
    int rc2;
    for(rc2 = sqlite3changeset_next(pIter);
        rc2==SQLITE_ROW;
        rc2 = sqlite3changeset_next(pIter)
    ){
      BatchTable *pTab;
      BatchIndex *pIdx;
      const char *zTab;           /* Table this change applies to */
      int nCol;                   /* Number of columns in table */
      int op;                     /* UPDATE, INSERT or DELETE */

      sqlite3changeset_op(pIter, &zTab, &nCol, &op, 0);
      assert( op==SQLITE_INSERT || op==SQLITE_UPDATE || op==SQLITE_DELETE );

      rc = cbFindTable(p, zTab, &pTab);
      assert( pTab || rc!=SQLITE_OK );
      if( pTab ){
        for(pIdx=pTab->pIdx; pIdx && rc==SQLITE_OK; pIdx=pIdx->pNext){
          if( op==SQLITE_UPDATE && pIdx->bPk ) continue;
          if( op==SQLITE_UPDATE || op==SQLITE_DELETE ){
            rc = cbAddToHash(p, pIter, pIdx, sqlite3changeset_old, 0, &bConf);
          }
          if( op==SQLITE_UPDATE || op==SQLITE_INSERT ){
            rc = cbAddToHash(p, pIter, pIdx, 
                sqlite3changeset_new, sqlite3changeset_old, &bConf
            );
          }
        }
      }
      if( rc!=SQLITE_OK ) break;
    }

    rc2 = sqlite3changeset_finalize(pIter);
    if( rc==SQLITE_OK ) rc = rc2;
  }

  if( rc==SQLITE_OK && bConf ){
    rc = SQLITE_CONSTRAINT;
  }
  p->iChangesetId++;
  return rc;
}

/*
** Zero an existing changebatch object.
*/
void sqlite3changebatch_zero(sqlite3_changebatch *p){
  int i;
  for(i=0; i<p->nHash; i++){
    BatchIndexEntry *pEntry;
    BatchIndexEntry *pNext;
    for(pEntry=p->apHash[i]; pEntry; pEntry=pNext){
      pNext = pEntry->pNext;
      cbFree(pEntry);
    }
  }
  cbFree(p->apHash);
  p->nHash = 0;
  p->apHash = 0;
}

/*
** Delete a changebatch object.
*/
void sqlite3changebatch_delete(sqlite3_changebatch *p){
  BatchTable *pTab;
  BatchTable *pTabNext;

  sqlite3changebatch_zero(p);
  for(pTab=p->pTab; pTab; pTab=pTabNext){
    pTabNext = pTab->pNext;
    cbFreeTable(pTab);
  }
  cbFree(p);
}

/*
** Return the db handle.
*/
sqlite3 *sqlite3changebatch_db(sqlite3_changebatch *p){
  return p->db;
}

#endif /* SQLITE_ENABLE_SESSION && SQLITE_ENABLE_PREUPDATE_HOOK */

#if !defined(SQLITECHANGEBATCH_H_) 
#define SQLITECHANGEBATCH_H_ 1

typedef struct sqlite3_changebatch sqlite3_changebatch;

/*
** Create a new changebatch object for detecting conflicts between
** changesets associated with a schema equivalent to that of the "main"
** database of the open database handle db passed as the first
** parameter. It is the responsibility of the caller to ensure that
** the database handle is not closed until after the changebatch
** object has been deleted.
**
** A changebatch object is used to detect batches of non-conflicting
** changesets. Changesets that do not conflict may be applied to the 
** target database in any order without affecting the final state of 
** the database.
**
** The changebatch object only works reliably if PRIMARY KEY and UNIQUE
** constraints on tables affected by the changesets use collation
** sequences that are equivalent to built-in collation sequence 
** BINARY for the == operation.
**
** If successful, SQLITE_OK is returned and (*pp) set to point to
** the new changebatch object. If an error occurs, an SQLite error
** code is returned and the final value of (*pp) is undefined.
*/
int sqlite3changebatch_new(sqlite3 *db, sqlite3_changebatch **pp);

/*
** Argument p points to a buffer containing a changeset n bytes in
** size. Assuming no error occurs, this function returns SQLITE_OK
** if the changeset does not conflict with any changeset passed 
** to an sqlite3changebatch_add() call made on the same 
** sqlite3_changebatch* handle since the most recent call to
** sqlite3changebatch_zero(). If the changeset does conflict with 
** an earlier such changeset, SQLITE_CONSTRAINT is returned. Or, 
** if an error occurs, some other SQLite error code may be returned.
**
** One changeset is said to conflict with another if
** either:
**
**   * the two changesets contain operations (INSERT, UPDATE or 
**     DELETE) on the same row, identified by primary key, or
**
**   * the two changesets contain operations (INSERT, UPDATE or 
**     DELETE) on rows with identical values in any combination 
**     of fields constrained by a UNIQUE constraint.
**
** Even if this function returns SQLITE_CONFLICT, the current
** changeset is added to the internal data structures - so future
** calls to this function may conflict with it. If this function
** returns any result code other than SQLITE_OK or SQLITE_CONFLICT,
** the result of any future call to sqlite3changebatch_add() is
** undefined.
**
** Only changesets may be passed to this function. Passing a 
** patchset to this function results in an SQLITE_MISUSE error.
*/
int sqlite3changebatch_add(sqlite3_changebatch*, void *p, int n);

/*
** Zero a changebatch object. This causes the records of all earlier 
** calls to sqlite3changebatch_add() to be discarded.
*/
void sqlite3changebatch_zero(sqlite3_changebatch*);

/*
** Return a copy of the first argument passed to the sqlite3changebatch_new()
** call used to create the changebatch object passed as the only argument
** to this function.
*/
sqlite3 *sqlite3changebatch_db(sqlite3_changebatch*);

/*
** Delete a changebatch object.
*/
void sqlite3changebatch_delete(sqlite3_changebatch*);

#endif /* !defined(SQLITECHANGEBATCH_H_) */

# else
#   define SESSIONS_STRM_CHUNK_SIZE 1024
# endif
#endif

#define SESSIONS_ROWID "_rowid_"

/*
** The three different types of changesets generated.
*/
#define SESSIONS_PATCHSET      0
#define SESSIONS_CHANGESET     1
#define SESSIONS_FULLCHANGESET 2

static int sessions_strm_chunk_size = SESSIONS_STRM_CHUNK_SIZE;

typedef struct SessionHook SessionHook;
struct SessionHook {
  void *pCtx;
  int (*xOld)(void*,int,sqlite3_value**);
  int (*xNew)(void*,int,sqlite3_value**);

**
** Otherwise, the old.* record contains all primary key values and the 
** original values of any fields that have been modified. The new.* record 
** contains the new values of only those fields that have been modified.
*/ 
static int sessionAppendUpdate(
  SessionBuffer *pBuf,            /* Buffer to append to */
  int bPatchset,                  /* True for "patchset", 0 for "changeset" */
  int ePatchset,                  /* True for "patchset", 0 for "changeset" */
  sqlite3_stmt *pStmt,            /* Statement handle pointing at new row */
  SessionChange *p,               /* Object containing old values */
  u8 *abPK                        /* Boolean array - true for PK columns */
){
  int rc = SQLITE_OK;
  SessionBuffer buf2 = {0,0,0}; /* Buffer to accumulate new.* record in */
  int bNoop = 1;                /* Set to zero if any values are modified */

    }

    /* If at least one field has been modified, this is not a no-op. */
    if( bChanged ) bNoop = 0;

    /* Add a field to the old.* record. This is omitted if this module is
    ** currently generating a patchset. */
    if( bPatchset==0 ){
      if( bChanged || abPK[i] ){
    if( ePatchset!=SESSIONS_PATCHSET ){
      if( ePatchset==SESSIONS_FULLCHANGESET || bChanged || abPK[i] ){
        sessionAppendBlob(pBuf, pCsr, nAdvance, &rc);
      }else{
        sessionAppendByte(pBuf, 0, &rc);
      }
    }

    /* Add a field to the new.* record. Or the only record if currently
    ** generating a patchset.  */
    if( bChanged || (bPatchset && abPK[i]) ){
    if( bChanged || (ePatchset==SESSIONS_PATCHSET && abPK[i]) ){
      sessionAppendCol(&buf2, pStmt, i, &rc);
    }else{
      sessionAppendByte(&buf2, 0, &rc);
    }

    pCsr += nAdvance;
  }

/*
** Append a DELETE change to the buffer passed as the first argument. Use
** the changeset format if argument bPatchset is zero, or the patchset
** format otherwise.
*/
static int sessionAppendDelete(
  SessionBuffer *pBuf,            /* Buffer to append to */
  int bPatchset,                  /* True for "patchset", 0 for "changeset" */
  int eChangeset,                 /* One of SESSIONS_CHANGESET etc. */
  SessionChange *p,               /* Object containing old values */
  int nCol,                       /* Number of columns in table */
  u8 *abPK                        /* Boolean array - true for PK columns */
){
  int rc = SQLITE_OK;

  sessionAppendByte(pBuf, SQLITE_DELETE, &rc);
  sessionAppendByte(pBuf, p->bIndirect, &rc);

  if( bPatchset==0 ){
  if( eChangeset!=SESSIONS_PATCHSET ){
    sessionAppendBlob(pBuf, p->aRecord, p->nRecord, &rc);
  }else{
    int i;
    u8 *a = p->aRecord;
    for(i=0; i<nCol; i++){
      u8 *pStart = a;
      int eType = *a++;

** This function is a no-op if *pRc is set to other than SQLITE_OK when it
** is called. Otherwise, append a serialized table header (part of the binary 
** changeset format) to buffer *pBuf. If an error occurs, set *pRc to an
** SQLite error code before returning.
*/
static void sessionAppendTableHdr(
  SessionBuffer *pBuf,            /* Append header to this buffer */
  int bPatchset,                  /* Use the patchset format if true */
  int ePatchset,                  /* Use the patchset format if true */
  SessionTable *pTab,             /* Table object to append header for */
  int *pRc                        /* IN/OUT: Error code */
){
  /* Write a table header */
  sessionAppendByte(pBuf, (bPatchset ? 'P' : 'T'), pRc);
  sessionAppendByte(pBuf, (ePatchset==SESSIONS_PATCHSET) ? 'P' : 'T', pRc);
  sessionAppendVarint(pBuf, pTab->nCol, pRc);
  sessionAppendBlob(pBuf, pTab->abPK, pTab->nCol, pRc);
  sessionAppendBlob(pBuf, (u8 *)pTab->zName, (int)strlen(pTab->zName)+1, pRc);
}

/*
** Generate either a changeset (if argument bPatchset is zero) or a patchset
** (if it is non-zero) based on the current contents of the session object
** passed as the first argument.
**
** If no error occurs, SQLITE_OK is returned and the new changeset/patchset
** stored in output variables *pnChangeset and *ppChangeset. Or, if an error
** occurs, an SQLite error code is returned and both output variables set 
** to 0.
*/
static int sessionGenerateChangeset(
  sqlite3_session *pSession,      /* Session object */
  int bPatchset,                  /* True for patchset, false for changeset */
  int ePatchset,                  /* One of SESSIONS_CHANGESET etc. */
  int (*xOutput)(void *pOut, const void *pData, int nData),
  void *pOut,                     /* First argument for xOutput */
  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
  void **ppChangeset              /* OUT: Buffer containing changeset */
){
  sqlite3 *db = pSession->db;     /* Source database handle */
  SessionTable *pTab;             /* Used to iterate through attached tables */

      /* Check the table schema is still Ok. */
      rc = sessionReinitTable(pSession, pTab);
      if( rc==SQLITE_OK && pTab->nCol!=nOldCol ){
        rc = sessionUpdateChanges(pSession, pTab);
      }

      /* Write a table header */
      sessionAppendTableHdr(&buf, bPatchset, pTab, &rc);
      sessionAppendTableHdr(&buf, ePatchset, pTab, &rc);

      /* Build and compile a statement to execute: */
      if( rc==SQLITE_OK ){
        rc = sessionSelectStmt(db, 0, pSession->zDb, 
            zName, pTab->bRowid, pTab->nCol, pTab->azCol, pTab->abPK, &pSel
        );
      }

              sessionAppendByte(&buf, SQLITE_INSERT, &rc);
              sessionAppendByte(&buf, p->bIndirect, &rc);
              for(iCol=0; iCol<pTab->nCol; iCol++){
                sessionAppendCol(&buf, pSel, iCol, &rc);
              }
            }else{
              assert( pTab->abPK!=0 );
              rc = sessionAppendUpdate(&buf, bPatchset, pSel, p, pTab->abPK);
              rc = sessionAppendUpdate(&buf, ePatchset, pSel, p, pTab->abPK);
            }
          }else if( p->op!=SQLITE_INSERT ){
            rc = sessionAppendDelete(&buf, bPatchset, p, pTab->nCol,pTab->abPK);
            rc = sessionAppendDelete(&buf, ePatchset, p, pTab->nCol,pTab->abPK);
          }
          if( rc==SQLITE_OK ){
            rc = sqlite3_reset(pSel);
          }

          /* If the buffer is now larger than sessions_strm_chunk_size, pass
          ** its contents to the xOutput() callback. */

  sqlite3_session *pSession,      /* Session object */
  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
  void **ppChangeset              /* OUT: Buffer containing changeset */
){
  int rc;

  if( pnChangeset==0 || ppChangeset==0 ) return SQLITE_MISUSE;
  rc = sessionGenerateChangeset(pSession, 0, 0, 0, pnChangeset, ppChangeset);
  rc = sessionGenerateChangeset(
      pSession, SESSIONS_CHANGESET, 0, 0, pnChangeset, ppChangeset);
  assert( rc || pnChangeset==0 
       || pSession->bEnableSize==0 || *pnChangeset<=pSession->nMaxChangesetSize 
  );
  return rc;
}

/*
** Streaming version of sqlite3session_changeset().
*/
int sqlite3session_changeset_strm(
  sqlite3_session *pSession,
  int (*xOutput)(void *pOut, const void *pData, int nData),
  void *pOut
){
  if( xOutput==0 ) return SQLITE_MISUSE;
  return sessionGenerateChangeset(pSession, 0, xOutput, pOut, 0, 0);
  return sessionGenerateChangeset(
      pSession, SESSIONS_CHANGESET, xOutput, pOut, 0, 0);
}

/*
** Streaming version of sqlite3session_patchset().
*/
int sqlite3session_patchset_strm(
  sqlite3_session *pSession,
  int (*xOutput)(void *pOut, const void *pData, int nData),
  void *pOut
){
  if( xOutput==0 ) return SQLITE_MISUSE;
  return sessionGenerateChangeset(pSession, 1, xOutput, pOut, 0, 0);
  return sessionGenerateChangeset(
      pSession, SESSIONS_PATCHSET, xOutput, pOut, 0, 0);
}

/*
** Obtain a patchset object containing all changes recorded by the 
** session object passed as the first argument.
**
** It is the responsibility of the caller to eventually free the buffer 
** using sqlite3_free().
*/
int sqlite3session_patchset(
  sqlite3_session *pSession,      /* Session object */
  int *pnPatchset,                /* OUT: Size of buffer at *ppChangeset */
  void **ppPatchset               /* OUT: Buffer containing changeset */
){
  if( pnPatchset==0 || ppPatchset==0 ) return SQLITE_MISUSE;
  return sessionGenerateChangeset(pSession, 1, 0, 0, pnPatchset, ppPatchset);
  return sessionGenerateChangeset(
      pSession, SESSIONS_PATCHSET, 0, 0, pnPatchset, ppPatchset);
}

int sqlite3session_fullchangeset(
  sqlite3_session *pSession,      /* Session object */
  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
  void **ppChangeset              /* OUT: Buffer containing changeset */
){
  return sessionGenerateChangeset(
      pSession, SESSIONS_FULLCHANGESET, 0, 0, pnChangeset, ppChangeset);
}


/*
** Enable or disable the session object passed as the first argument.
*/
int sqlite3session_enable(sqlite3_session *pSession, int bEnable){
  int ret;
  sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));

  SessionTable *pTab;
  assert( xOutput==0 || (ppOut==0 && pnOut==0) );

  /* Create the serialized output changeset based on the contents of the
  ** hash tables attached to the SessionTable objects in list p->pList. 
  */
  for(pTab=pGrp->pList; rc==SQLITE_OK && pTab; pTab=pTab->pNext){
    int eChangeset = pGrp->bPatch ? SESSIONS_PATCHSET : SESSIONS_CHANGESET;
    int i;
    if( pTab->nEntry==0 ) continue;

    sessionAppendTableHdr(&buf, pGrp->bPatch, pTab, &rc);
    sessionAppendTableHdr(&buf, eChangeset, pTab, &rc);
    for(i=0; i<pTab->nChange; i++){
      SessionChange *p;
      for(p=pTab->apChange[i]; p; p=p->pNext){
        sessionAppendByte(&buf, p->op, &rc);
        sessionAppendByte(&buf, p->bIndirect, &rc);
        sessionAppendBlob(&buf, p->aRecord, p->nRecord, &rc);
        if( rc==SQLITE_OK && xOutput && buf.nBuf>=sessions_strm_chunk_size ){

** changeset, even though the delete took place while the session was disabled.
** Or, if one field of a row is updated while a session is enabled, and 
** then another field of the same row is updated while the session is disabled,
** the resulting changeset will contain an UPDATE change that updates both
** fields.
*/
int sqlite3session_changeset(
  sqlite3_session *pSession,      /* Session object */
  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
  void **ppChangeset              /* OUT: Buffer containing changeset */
);

/*
** CAPI3REF: Generate A Full Changeset From A Session Object
**
** This function is similar to sqlite3session_changeset(), except that for
** each row affected by an UPDATE statement, all old.* values are recorded
** as part of the changeset, not just those modified.
*/
int sqlite3session_fullchangeset(
  sqlite3_session *pSession,      /* Session object */
  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
  void **ppChangeset              /* OUT: Buffer containing changeset */
);

/*
** CAPI3REF: Return An Upper-limit For The Size Of The Changeset

** Tclcmd:  $session attach TABLE
**          $session changeset
**          $session delete
**          $session enable BOOL
**          $session indirect INTEGER
**          $session patchset
**          $session table_filter SCRIPT
**          $session fullchangeset
*/
static int SQLITE_TCLAPI test_session_cmd(
  void *clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  TestSession *p = (TestSession*)clientData;
  sqlite3_session *pSession = p->pSession;
  static struct SessionSubcmd {
    const char *zSub;
    int nArg;
    const char *zMsg;
    int iSub;
  } aSub[] = {
    { "attach",       1, "TABLE",      }, /* 0 */
    { "changeset",    0, "",           }, /* 1 */
    { "delete",       0, "",           }, /* 2 */
    { "enable",       1, "BOOL",       }, /* 3 */
    { "indirect",     1, "BOOL",       }, /* 4 */
    { "isempty",      0, "",           }, /* 5 */
    { "table_filter", 1, "SCRIPT",     }, /* 6 */
    { "attach",       1, "TABLE"       }, /* 0 */
    { "changeset",    0, ""            }, /* 1 */
    { "delete",       0, ""            }, /* 2 */
    { "enable",       1, "BOOL"        }, /* 3 */
    { "indirect",     1, "BOOL"        }, /* 4 */
    { "isempty",      0, ""            }, /* 5 */
    { "table_filter", 1, "SCRIPT"      }, /* 6 */
    { "patchset",     0, "",           }, /* 7 */
    { "diff",         2, "FROMDB TBL", }, /* 8 */
    { "memory_used",  0, "",           }, /* 9 */
    { "changeset_size", 0, "",         }, /* 10 */
    { "object_config", 2, "OPTION INTEGER", }, /* 11 */
    { "diff",         2, "FROMDB TBL"  }, /* 8 */
    { "fullchangeset",0, ""            }, /* 9 */
    { "memory_used",  0, "",           }, /* 10 */
    { "changeset_size", 0, "",         }, /* 11 */
    { "object_config", 2, "OPTION INTEGER", }, /* 12 */
    { 0 }
  };
  int iSub;
  int rc;

  if( objc<2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "SUBCOMMAND ...");

      rc = sqlite3session_attach(pSession, zArg);
      if( rc!=SQLITE_OK ){
        return test_session_error(interp, rc, 0);
      }
      break;
    }

    case 9:        /* fullchangeset */
    case 7:        /* patchset */
    case 1: {      /* changeset */
      TestSessionsBlob o = {0, 0};
      if( test_tcl_integer(interp, SESSION_STREAM_TCL_VAR) ){
      if( iSub!=9 && test_tcl_integer(interp, SESSION_STREAM_TCL_VAR) ){
        void *pCtx = (void*)&o;
        if( iSub==7 ){
          rc = sqlite3session_patchset_strm(pSession, testStreamOutput, pCtx);
        }else{
          rc = sqlite3session_changeset_strm(pSession, testStreamOutput, pCtx);
        }
      }else{
        if( iSub==7 ){
          rc = sqlite3session_patchset(pSession, &o.n, &o.p);
        }else if( iSub==9 ){
          rc = sqlite3session_fullchangeset(pSession, &o.n, &o.p);
        }else{
          rc = sqlite3session_changeset(pSession, &o.n, &o.p);
        }
      }
      if( rc==SQLITE_OK ){
        assert_changeset_is_ok(o.n, o.p);
        Tcl_SetObjResult(interp, Tcl_NewByteArrayObj(o.p, o.n)); 
      }
      sqlite3_free(o.p);
      if( rc!=SQLITE_OK ){
        return test_session_error(interp, rc, 0);
      }
      break;
    }


    case 2:        /* delete */
      Tcl_DeleteCommand(interp, Tcl_GetString(objv[0]));
      break;

    case 3: {      /* enable */
      int val;

      assert( rc!=SQLITE_OK || zErr==0 );
      if( rc ){
        return test_session_error(interp, rc, zErr);
      }
      break;
    }

    case 9: {      /* memory_used */
    case 10: {      /* memory_used */
      sqlite3_int64 nMalloc = sqlite3session_memory_used(pSession);
      Tcl_SetObjResult(interp, Tcl_NewWideIntObj(nMalloc));
      break;
    }

    case 10: {
    case 11: {
      sqlite3_int64 nSize = sqlite3session_changeset_size(pSession);
      Tcl_SetObjResult(interp, Tcl_NewWideIntObj(nSize));
      break;
    }
    case 11: {    /* object_config */
    case 12: {    /* object_config */
      struct ObjConfOpt {
        const char *zName;
        int opt;
      } aOpt[] = {
        { "size", SQLITE_SESSION_OBJCONFIG_SIZE },
        { "rowid", SQLITE_SESSION_OBJCONFIG_ROWID },
        { 0, 0 }
      };
      int sz = (int)sizeof(aOpt[0]);

      int iArg;
      Tcl_Size iOpt;
      if( Tcl_GetIndexFromObjStruct(interp,objv[2],aOpt,sz,"option",0,&iOpt) ){
        return TCL_ERROR;
      }
      if( Tcl_GetIntFromObj(interp, objv[3], &iArg) ){
        return TCL_ERROR;

   || TCL_OK!=Tcl_GetIntFromObj(interp, Tcl_GetObjResult(interp), &res)
  ){
    Tcl_BackgroundError(interp);
  }

  Tcl_DecrRefCount(pEval);
  return res;
}  
}

static int test_conflict_handler(
  void *pCtx,                     /* Pointer to TestConflictHandler structure */
  int eConf,                      /* DATA, MISSING, CONFLICT, CONSTRAINT */
  sqlite3_changeset_iter *pIter   /* Handle describing change and conflict */
){
  TestConflictHandler *p = (TestConflictHandler *)pCtx;

  }
  if( rc!=SQLITE_OK ){
    return test_session_error(interp, rc, 0);
  }

  return TCL_OK;
}

#include "sqlite3changebatch.h"

typedef struct TestChangebatch TestChangebatch;
struct TestChangebatch {
  sqlite3_changebatch *pChangebatch;
};

/*
** Tclcmd:  $changebatch add BLOB
**          $changebatch zero
**          $changebatch delete
*/
static int SQLITE_TCLAPI test_changebatch_cmd(
  void *clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  TestChangebatch *p = (TestChangebatch*)clientData;
  sqlite3_changebatch *pChangebatch = p->pChangebatch;
  struct SessionSubcmd {
    const char *zSub;
    int nArg;
    const char *zMsg;
    int iSub;
  } aSub[] = {
    { "add",          1, "CHANGESET",  }, /* 0 */
    { "zero",         0, "",           }, /* 1 */
    { "delete",       0, "",           }, /* 2 */
    { 0 }
  };
  int iSub;
  int rc;

  if( objc<2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "SUBCOMMAND ...");
    return TCL_ERROR;
  }
  rc = Tcl_GetIndexFromObjStruct(interp, 
      objv[1], aSub, sizeof(aSub[0]), "sub-command", 0, &iSub
  );
  if( rc!=TCL_OK ) return rc;
  if( objc!=2+aSub[iSub].nArg ){
    Tcl_WrongNumArgs(interp, 2, objv, aSub[iSub].zMsg);
    return TCL_ERROR;
  }

  switch( iSub ){
    case 0: {      /* add */
      Tcl_Size nArg;
      unsigned char *pArg = Tcl_GetByteArrayFromObj(objv[2], &nArg);
      rc = sqlite3changebatch_add(pChangebatch, pArg, (int)nArg);
      if( rc!=SQLITE_OK && rc!=SQLITE_CONSTRAINT ){
        return test_session_error(interp, rc, 0);
      }else{
        extern const char *sqlite3ErrName(int);
        Tcl_SetObjResult(interp, Tcl_NewStringObj(sqlite3ErrName(rc), -1));
      }
      break;
    }

    case 1: {      /* zero */
      sqlite3changebatch_zero(pChangebatch);
      break;
    }

    case 2:        /* delete */
      Tcl_DeleteCommand(interp, Tcl_GetString(objv[0]));
      break;
  }

  return TCL_OK;
}

static void SQLITE_TCLAPI test_changebatch_del(void *clientData){
  TestChangebatch *p = (TestChangebatch*)clientData;
  sqlite3changebatch_delete(p->pChangebatch);
  ckfree((char*)p);
}

/*
** Tclcmd:  sqlite3changebatch CMD DB-HANDLE
*/
static int SQLITE_TCLAPI test_sqlite3changebatch(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  sqlite3 *db;
  Tcl_CmdInfo info;
  int rc;                         /* sqlite3session_create() return code */
  TestChangebatch *p;             /* New wrapper object */

  if( objc!=3 ){
    Tcl_WrongNumArgs(interp, 1, objv, "CMD DB-HANDLE");
    return TCL_ERROR;
  }

  if( 0==Tcl_GetCommandInfo(interp, Tcl_GetString(objv[2]), &info) ){
    Tcl_AppendResult(interp, "no such handle: ", Tcl_GetString(objv[2]), 0);
    return TCL_ERROR;
  }
  db = *(sqlite3 **)info.objClientData;

  p = (TestChangebatch*)ckalloc(sizeof(TestChangebatch));
  memset(p, 0, sizeof(TestChangebatch));
  rc = sqlite3changebatch_new(db, &p->pChangebatch);
  if( rc!=SQLITE_OK ){
    ckfree((char*)p);
    return test_session_error(interp, rc, 0);
  }

  Tcl_CreateObjCommand(
      interp, Tcl_GetString(objv[1]), test_changebatch_cmd, (ClientData)p,
      test_changebatch_del
  );
  Tcl_SetObjResult(interp, objv[1]);
  return TCL_OK;
}

/*
** tclcmd: CMD configure REBASE-BLOB
** tclcmd: CMD rebase CHANGESET
** tclcmd: CMD delete
*/
static int SQLITE_TCLAPI test_rebaser_cmd(

  int i;

  for(i=0; i<sizeof(aCmd)/sizeof(struct Cmd); i++){
    struct Cmd *p = &aCmd[i];
    Tcl_CreateObjCommand(interp, p->zCmd, p->xProc, 0, 0);
  }


  Tcl_CreateObjCommand(
      interp, "sqlite3changebatch", test_sqlite3changebatch, 0, 0
  );
  return TCL_OK;
}

#endif /* SQLITE_TEST && SQLITE_SESSION && SQLITE_PREUPDATE_HOOK */

  original: sqlite3Worker1Promiser
});

//#if target=es6-module
/**
  When built as a module, we export sqlite3Worker1Promiser.v2()
  instead of sqlite3Worker1Promise() because (A) its interface is more
  conventional for ESM usage and (B) the ESM export option for this
  API did not exist until v2 was created, so there's no backwards
  conventional for ESM usage and (B) the ESM option export option for
  this API did not exist until v2 was created, so there's no backwards
  incompatibility.
*/
export default sqlite3Worker1Promiser.v2;
//#endif /* target=es6-module */
//#else
/* Built with the omit-oo1 flag. */
//#endif ifnot omit-oo1

    const mustNotReach = ()=>toss("This is not supposed to be reached.");

    await wtest('exec',{
      sql: ["create table t(a,b)",
            "insert into t(a,b) values(1,2),(3,4),(5,6)"
           ].join(';'),
      resultRows: [], columnNames: [],
      lastInsertRowId: true,
      countChanges: sqConfig.bigIntEnabled ? 64 : true
    }, function(ev){
      ev = ev.result;
      T.assert(0===ev.resultRows.length)
        .assert(0===ev.columnNames.length)
        .assert(sqConfig.bigIntEnabled
                ? (3n===ev.changeCount)
                : (3===ev.changeCount))
                : (3===ev.changeCount));
        .assert('bigint'===typeof ev.lastInsertRowId)
        .assert(ev.lastInsertRowId>=3);
    });

    await wtest('exec',{
      sql: 'select a a, b b from t order by a',
      resultRows: [], columnNames: [],
    }, function(ev){
      ev = ev.result;

  $(TOP)/src/test_vfs.c \
  $(TOP)/src/test_windirent.c \
  $(TOP)/src/test_window.c \
  $(TOP)/src/test_wsd.c       \
  $(TOP)/ext/fts3/fts3_term.c \
  $(TOP)/ext/fts3/fts3_test.c  \
  $(TOP)/ext/session/test_session.c \
  $(TOP)/ext/session/sqlite3changebatch.c \
  $(TOP)/ext/recover/sqlite3recover.c \
  $(TOP)/ext/recover/dbdata.c \
  $(TOP)/ext/recover/test_recover.c \
  $(TOP)/ext/intck/test_intck.c  \
  $(TOP)/ext/intck/sqlite3intck.c \
  $(TOP)/ext/rbu/test_rbu.c

  $(TOP)/ext/fts3/fts3.c \
  $(TOP)/ext/fts3/fts3_aux.c \
  $(TOP)/ext/fts3/fts3_expr.c \
  $(TOP)/ext/fts3/fts3_tokenizer.c \
  $(TOP)/ext/fts3/fts3_write.c \
  $(TOP)/ext/session/sqlite3session.c \
  $(TOP)/ext/misc/stmt.c \
  $(TOP)/ext/session/test_session.c \
  fts5.c

# Header files used by all library source files.
#
HDR = \
   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \

** Otherwise the behavior is undefined.
*/
int sqlite3BitvecSet(Bitvec *p, u32 i){
  u32 h;
  if( p==0 ) return SQLITE_OK;
  assert( i>0 );
  assert( i<=p->iSize );
  if( i>p->iSize || i==0 ){
    sqlite3_log(SQLITE_ERROR, 
        "Bitvec: setting bit %d of bitvec size %d\n", (int)i, (int)p->iSize
    );
    abort();
  }
  i--;
  while((p->iSize > BITVEC_NBIT) && p->iDivisor) {
    u32 bin = i/p->iDivisor;
    i = i%p->iDivisor;
    if( p->u.apSub[bin]==0 ){
      p->u.apSub[bin] = sqlite3BitvecCreate( p->iDivisor );
      if( p->u.apSub[bin]==0 ) return SQLITE_NOMEM_BKPT;

      pLock->eLock = READ_LOCK;
    }
  }
}

#endif /* SQLITE_OMIT_SHARED_CACHE */

#ifndef SQLITE_OMIT_CONCURRENT
/*
** The following structure - BtreePtrmap - stores the in-memory pointer map
** used for newly allocated pages in CONCURRENT transactions. Such pages are
** always allocated in a contiguous block (from the end of the file) starting
** with page BtreePtrmap.iFirst.
*/
typedef struct RollbackEntry RollbackEntry;
typedef struct PtrmapEntry PtrmapEntry;
struct PtrmapEntry {
  Pgno parent;
  u8 eType;
};
struct RollbackEntry {
  Pgno pgno;
  Pgno parent;
  u8 eType;
};
struct BtreePtrmap {
  Pgno iFirst;                    /* First new page number aPtr[0] */

  int nPtrAlloc;                  /* Allocated size of aPtr[] array */
  PtrmapEntry *aPtr;              /* Array of parent page numbers */

  int nSvpt;                      /* Used size of aSvpt[] array */
  int nSvptAlloc;                 /* Allocated size of aSvpt[] */
  int *aSvpt;                     /* First aRollback[] entry for savepoint i */

  int nRollback;                  /* Used size of aRollback[] array */
  int nRollbackAlloc;             /* Allocated size of aRollback[] array */
  RollbackEntry *aRollback;       /* Array of rollback entries */
};

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** If page number pgno is greater than or equal to BtreePtrmap.iFirst, 
** store an entry for it in the pointer-map structure.
*/
static int btreePtrmapStore(
  BtShared *pBt,
  Pgno pgno,
  u8 eType, 
  Pgno parent
){
  BtreePtrmap *pMap = pBt->pMap;
  if( pgno>=pMap->iFirst ){
    int iEntry = pgno - pMap->iFirst;

    /* Grow the aPtr[] array as required */
    while( iEntry>=pMap->nPtrAlloc ){
      int nNew = pMap->nPtrAlloc ? pMap->nPtrAlloc*2 : 16;
      PtrmapEntry *aNew = (PtrmapEntry*)sqlite3_realloc(
          pMap->aPtr, nNew*sizeof(PtrmapEntry)
      );
      if( aNew==0 ){
        return SQLITE_NOMEM;
      }else{
        int nByte = (nNew-pMap->nPtrAlloc)*sizeof(PtrmapEntry);
        memset(&aNew[pMap->nPtrAlloc], 0, nByte);
        pMap->aPtr = aNew;
        pMap->nPtrAlloc = nNew;
      }
    }

    /* Add an entry to the rollback log if required */
    if( pMap->nSvpt>0 && pMap->aPtr[iEntry].parent ){
      if( pMap->nRollback>=pMap->nRollbackAlloc ){
        int nNew = pMap->nRollback ? pMap->nRollback*2 : 16;
        RollbackEntry *aNew = (RollbackEntry*)sqlite3_realloc(
            pMap->aRollback, nNew*sizeof(RollbackEntry)
        );
        if( aNew==0 ){
          return SQLITE_NOMEM;
        }else{
          pMap->aRollback = aNew;
          pMap->nRollbackAlloc = nNew;
        }
      }

      pMap->aRollback[pMap->nRollback].pgno = pgno;
      pMap->aRollback[pMap->nRollback].parent = pMap->aPtr[iEntry].parent;
      pMap->aRollback[pMap->nRollback].eType = pMap->aPtr[iEntry].eType;
      pMap->nRollback++;
    }

    /* Update the aPtr[] array */
    pMap->aPtr[iEntry].parent = parent;
    pMap->aPtr[iEntry].eType = eType;
  }

  return SQLITE_OK;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** Open savepoint iSavepoint, if it is not already open.
*/
static int btreePtrmapBegin(BtShared *pBt, int nSvpt){
  BtreePtrmap *pMap = pBt->pMap;
  if( pMap && nSvpt>pMap->nSvpt ){
    int i;
    if( nSvpt>=pMap->nSvptAlloc ){
      int nNew = pMap->nSvptAlloc ? pMap->nSvptAlloc*2 : 16;
      int *aNew = sqlite3_realloc(pMap->aSvpt, sizeof(int) * nNew);
      if( aNew==0 ){
        return SQLITE_NOMEM;
      }else{
        pMap->aSvpt = aNew;
        pMap->nSvptAlloc = nNew;
      }
    }

    for(i=pMap->nSvpt; i<nSvpt; i++){
      pMap->aSvpt[i] = pMap->nRollback;
    }
    pMap->nSvpt = nSvpt;
  }

  return SQLITE_OK;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** Rollback (if op==SAVEPOINT_ROLLBACK) or release (if op==SAVEPOINT_RELEASE)
** savepoint iSvpt.
*/
static void btreePtrmapEnd(BtShared *pBt, int op, int iSvpt){
  BtreePtrmap *pMap = pBt->pMap;
  if( pMap ){
    assert( op==SAVEPOINT_ROLLBACK || op==SAVEPOINT_RELEASE );
    assert( iSvpt>=0 || (iSvpt==-1 && op==SAVEPOINT_ROLLBACK) );
    if( iSvpt<0 ){
      pMap->nSvpt = 0;
      pMap->nRollback = 0;
      memset(pMap->aPtr, 0, sizeof(Pgno) * pMap->nPtrAlloc);
    }else if( iSvpt<pMap->nSvpt ){
      if( op==SAVEPOINT_ROLLBACK ){
        int ii;
        for(ii=pMap->nRollback-1; ii>=pMap->aSvpt[iSvpt]; ii--){
          RollbackEntry *p = &pMap->aRollback[ii];
          PtrmapEntry *pEntry = &pMap->aPtr[p->pgno - pMap->iFirst];
          pEntry->parent = p->parent;
          pEntry->eType = p->eType;
        }
      }
      pMap->nSvpt = iSvpt + (op==SAVEPOINT_ROLLBACK);
      pMap->nRollback = pMap->aSvpt[iSvpt];
    }
  }
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** This function is called after an CONCURRENT transaction is opened on the
** database. It allocates the BtreePtrmap structure used to track pointers
** to allocated pages and zeroes the nFree/iTrunk fields in the database 
** header on page 1.
*/
static int btreePtrmapAllocate(BtShared *pBt){
  int rc = SQLITE_OK;
  if( pBt->pMap==0 ){
    BtreePtrmap *pMap = sqlite3_malloc(sizeof(BtreePtrmap));
    if( pMap==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memset(&pBt->pPage1->aData[32], 0, sizeof(u32)*2);
      memset(pMap, 0, sizeof(BtreePtrmap));
      pMap->iFirst = pBt->nPage + 1;
      pBt->pMap = pMap;
    }
  }
  return rc;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** Free any BtreePtrmap structure allocated by an earlier call to
** btreePtrmapAllocate().
*/
static void btreePtrmapDelete(BtShared *pBt){
  BtreePtrmap *pMap = pBt->pMap;
  if( pMap ){
    sqlite3_free(pMap->aRollback);
    sqlite3_free(pMap->aPtr);
    sqlite3_free(pMap->aSvpt);
    sqlite3_free(pMap);
    pBt->pMap = 0;
  }
}

/*
** Check that the pointer-map does not contain any entries with a parent
** page of 0. Call sqlite3_log() multiple times to output the entire
** data structure if it does.
*/
static void btreePtrmapCheck(BtShared *pBt, Pgno nPage){
  Pgno i;
  int bProblem = 0;
  BtreePtrmap *p = pBt->pMap;

  for(i=p->iFirst; i<=nPage; i++){
    PtrmapEntry *pEntry = &p->aPtr[i-p->iFirst];
    if( pEntry->eType==PTRMAP_OVERFLOW1
     || pEntry->eType==PTRMAP_OVERFLOW2
     || pEntry->eType==PTRMAP_BTREE
    ){
      if( pEntry->parent==0 ){
        bProblem = 1;
        break;
      }
    }
  }

  if( bProblem ){
    for(i=p->iFirst; i<=nPage; i++){
      PtrmapEntry *pEntry = &p->aPtr[i-p->iFirst];
      sqlite3_log(SQLITE_CORRUPT, 
          "btreePtrmapCheck: pgno=%d eType=%d parent=%d", 
          (int)i, (int)pEntry->eType, (int)pEntry->parent
      );
    }
    abort();
  }
}

#else  /* SQLITE_OMIT_CONCURRENT */
# define btreePtrmapAllocate(x) SQLITE_OK
# define btreePtrmapDelete(x) 
# define btreePtrmapBegin(x,y)  SQLITE_OK
# define btreePtrmapEnd(x,y,z) 
# define btreePtrmapCheck(y,z) 
#endif /* SQLITE_OMIT_CONCURRENT */

static void releasePage(MemPage *pPage);         /* Forward reference */
static void releasePageOne(MemPage *pPage);      /* Forward reference */
static void releasePageNotNull(MemPage *pPage);  /* Forward reference */

/*
***** This routine is used inside of assert() only ****
**

  int rc;           /* Return code from subfunctions */

  if( *pRC ) return;

  assert( sqlite3_mutex_held(pBt->mutex) );
  /* The super-journal page number must never be used as a pointer map page */
  assert( 0==PTRMAP_ISPAGE(pBt, PENDING_BYTE_PAGE(pBt)) );

#ifndef SQLITE_OMIT_CONCURRENT
  if( pBt->pMap ){
    *pRC = btreePtrmapStore(pBt, key, eType, parent);
    return;
  }
#endif

  assert( pBt->autoVacuum );
  if( key==0 ){
    *pRC = SQLITE_CORRUPT_BKPT;
    return;
  }
  iPtrmap = PTRMAP_PAGENO(pBt, key);

  }
  assert( pPage->pgno==pgno || CORRUPT_DB );
  assert( pPage->aData==sqlite3PagerGetData(pDbPage) );
  *ppPage = pPage;
  return SQLITE_OK;
}

#ifndef SQLITE_OMIT_CONCURRENT
/* 
** Set the value of the MemPage.pgnoRoot variable, if it exists.
*/
static void setMempageRoot(MemPage *pPg, u32 pgnoRoot){
  pPg->pgnoRoot = pgnoRoot;
}
#else
# define setMempageRoot(x,y)
#endif

/*
** Release a MemPage.  This should be called once for each prior
** call to btreeGetPage.
**
** Page1 is a special case and must be released using releasePageOne().
*/
static void releasePageNotNull(MemPage *pPage){

  Btree *p,                 /* The btree in which to start the transaction */
  int wrflag,               /* True to start a write transaction */
  int *pSchemaVersion       /* Put schema version number here, if not NULL */
){
  BtShared *pBt = p->pBt;
  Pager *pPager = pBt->pPager;
  int rc = SQLITE_OK;
  int bConcurrent = (p->db->eConcurrent && !ISAUTOVACUUM(pBt));

  sqlite3BtreeEnter(p);
  btreeIntegrity(p);

  /* If the btree is already in a write-transaction, or it
  ** is already in a read-transaction and a read-transaction
  ** is requested, this is a no-op.

    */
    while( pBt->pPage1==0 && SQLITE_OK==(rc = lockBtree(pBt)) );

    if( rc==SQLITE_OK && wrflag ){
      if( (pBt->btsFlags & BTS_READ_ONLY)!=0 ){
        rc = SQLITE_READONLY;
      }else{
        int exFlag = bConcurrent ? -1 : (wrflag>1);
        rc = sqlite3PagerBegin(pPager, wrflag>1, sqlite3TempInMemory(p->db));
        rc = sqlite3PagerBegin(pPager, exFlag, sqlite3TempInMemory(p->db));
        if( rc==SQLITE_OK ){
          rc = newDatabase(pBt);
        }else if( rc==SQLITE_BUSY_SNAPSHOT && pBt->inTransaction==TRANS_NONE ){
          /* if there was no transaction opened when this function was
          ** called and SQLITE_BUSY_SNAPSHOT is returned, change the error
          ** code to SQLITE_BUSY. */
          rc = SQLITE_BUSY;

          put4byte(&pPage1->aData[28], pBt->nPage);
        }
      }
    }
  }

trans_begun:
#ifndef SQLITE_OMIT_CONCURRENT
  if( bConcurrent && rc==SQLITE_OK && sqlite3PagerIsWal(pBt->pPager) ){
    rc = sqlite3PagerBeginConcurrent(pBt->pPager);
    if( rc==SQLITE_OK && wrflag ){
      rc = btreePtrmapAllocate(pBt);
    }
  }
#endif

  if( rc==SQLITE_OK ){
    if( pSchemaVersion ){
      *pSchemaVersion = get4byte(&pBt->pPage1->aData[40]);
    }
    if( wrflag ){
      /* This call makes sure that the pager has the correct number of
      ** open savepoints. If the second parameter is greater than 0 and
      ** the sub-journal is not already open, then it will be opened here.
      */
      int nSavepoint = p->db->nSavepoint;
      rc = sqlite3PagerOpenSavepoint(pPager, p->db->nSavepoint);
      rc = sqlite3PagerOpenSavepoint(pPager, nSavepoint);
      if( rc==SQLITE_OK && nSavepoint ){
        rc = btreePtrmapBegin(pBt, nSavepoint);
      }
    }
  }

  btreeIntegrity(p);
  sqlite3BtreeLeave(p);
  return rc;
}
int sqlite3BtreeBeginTrans(Btree *p, int wrflag, int *pSchemaVersion){
  BtShared *pBt;
  if( p->sharable
   || p->inTrans==TRANS_NONE
   || (p->inTrans==TRANS_READ && wrflag!=0)
#ifndef SQLITE_OMIT_CONCURRENT
   /* Always use the full version for "BEGIN CONCURRENT" transactions. This
   ** is to ensure that any required calls to btreePtrmapBegin() are made.
   ** These calls are not present on trunk (they're part of the
   ** begin-concurrent patch), and so they are not present in the fast path
   ** below. And it's easier just to call the full version every time than
   ** to complicate the code below by adding btreePtrmapBegin() calls. */
   || p->db->eConcurrent!=CONCURRENT_NONE
#endif
  ){
    return btreeBeginTrans(p,wrflag,pSchemaVersion);
  }
  pBt = p->pBt;
  if( pSchemaVersion ){
    *pSchemaVersion = get4byte(&pBt->pPage1->aData[40]);
  }

  return rc;
}

#else /* ifndef SQLITE_OMIT_AUTOVACUUM */
# define setChildPtrmaps(x) SQLITE_OK
#endif

#ifndef SQLITE_OMIT_CONCURRENT
/*
** This function is called as part of merging an CONCURRENT transaction with
** the snapshot at the head of the wal file. It relocates all pages in the
** range iFirst..iLast, inclusive. It is assumed that the BtreePtrmap 
** structure at BtShared.pMap contains the location of the pointers to each
** page in the range.
**
** If pnCurrent is NULL, then all pages in the range are moved to currently
** free locations (i.e. free-list entries) within the database file before page
** iFirst.
**
** Or, if pnCurrent is not NULL, then it points to a value containing the
** current size of the database file in pages. In this case, all pages are
** relocated to the end of the database file - page iFirst is relocated to
** page (*pnCurrent+1), page iFirst+1 to page (*pnCurrent+2), and so on.
** Value *pnCurrent is set to the new size of the database before this 
** function returns.
**
** If no error occurs, SQLITE_OK is returned. Otherwise, an SQLite error code.
*/
static int btreeRelocateRange(
  BtShared *pBt,                  /* B-tree handle */
  Pgno iFirst,                    /* First page to relocate */
  Pgno iLast,                     /* Last page to relocate */
  Pgno *pnCurrent                 /* If not NULL, IN/OUT: Database size */
){
  int rc = SQLITE_OK;
  BtreePtrmap *pMap = pBt->pMap;
  Pgno iPg;

  for(iPg=iFirst; iPg<=iLast && rc==SQLITE_OK; iPg++){
    MemPage *pFree = 0;     /* Page allocated from free-list */
    MemPage *pPg = 0;
    Pgno iNew;              /* New page number for pPg */
    PtrmapEntry *pEntry;    /* Pointer map entry for page iPg */

    if( iPg==PENDING_BYTE_PAGE(pBt) ) continue;
    pEntry = &pMap->aPtr[iPg - pMap->iFirst];

    if( pEntry->eType==PTRMAP_FREEPAGE ){
      Pgno dummy;
      rc = allocateBtreePage(pBt, &pFree, &dummy, iPg, BTALLOC_EXACT);
      if( pFree ){
        assert( sqlite3PagerPageRefcount(pFree->pDbPage)==1 );
        sqlite3PcacheDrop(pFree->pDbPage);
      }
      assert( rc!=SQLITE_OK || dummy==iPg );
    }else if( pnCurrent ){
      btreeGetPage(pBt, iPg, &pPg, 0);
      assert( sqlite3PagerIswriteable(pPg->pDbPage) );
      assert( sqlite3PagerPageRefcount(pPg->pDbPage)==1 );
      iNew = ++(*pnCurrent);
      if( iNew==PENDING_BYTE_PAGE(pBt) ) iNew = ++(*pnCurrent);
      rc = relocatePage(pBt, pPg, pEntry->eType, pEntry->parent, iNew, 1);
      releasePageNotNull(pPg);
    }else if( pEntry->eType!=0 ){

      /* Allocate a new page from the free-list to move page iPg to. 
      ** Except - if the page allocated is within the range being relocated
      ** (i.e. pgno>=iFirst), then discard it and allocate another.  */
      do {
        rc = allocateBtreePage(pBt, &pFree, &iNew, 0, 0);
        if( iNew>=iFirst ){
          assert( sqlite3PagerPageRefcount(pFree->pDbPage)==1 );
          assert( iNew>iPg );
          sqlite3PcacheDrop(pFree->pDbPage);
          pMap->aPtr[iNew - pMap->iFirst].eType = 0;
          pFree = 0;
        }
      }while( pFree==0 );

      assert( rc!=SQLITE_OK || iNew<iFirst );
      if( rc==SQLITE_OK ){
        releasePage(pFree);
        btreeGetPage(pBt, iPg, &pPg, 0);
        rc = relocatePage(pBt, pPg, pEntry->eType, pEntry->parent,iNew,1);
        releasePage(pPg);
      }
    }
  }
  return rc;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** The b-tree handle passed as the only argument is about to commit an
** CONCURRENT transaction. At this point it is guaranteed that this is 
** possible - the wal WRITER lock is held and it is known that there are 
** no conflicts with committed transactions.
*/
static int btreeFixUnlocked(Btree *p){
  BtShared *pBt = p->pBt;
  MemPage *pPage1 = pBt->pPage1;
  u8 *p1 = pPage1->aData;
  Pager *pPager = pBt->pPager;
  int rc = SQLITE_OK;

  /* If page 1 of the database is not writable, then no pages were allocated
  ** or freed by this transaction. In this case no special handling is 
  ** required. Otherwise, if page 1 is dirty, proceed.  */
  BtreePtrmap *pMap = pBt->pMap;
  Pgno iTrunk = get4byte(&p1[32]);
  Pgno nPage = btreePagecount(pBt);
  u32 nFree = get4byte(&p1[36]);

  assert( pBt->pMap );
  rc = sqlite3PagerUpgradeSnapshot(pPager, pPage1->pDbPage);
  assert( p1==pPage1->aData );

  if( rc==SQLITE_OK ){
    Pgno nHPage = get4byte(&p1[28]);
    Pgno nFin = nHPage;         /* Size of db after transaction merge */

    if( sqlite3PagerIswriteable(pPage1->pDbPage) ){
      Pgno iHTrunk = get4byte(&p1[32]);
      u32 nHFree = get4byte(&p1[36]);

      btreePtrmapCheck(pBt, nPage);

      /* Attach the head database free list to the end of the current
      ** transactions free-list (if any).  */
      if( iTrunk!=0 ){
        put4byte(&p1[36], nHFree + nFree);
        put4byte(&p1[32], iTrunk);
        while( iTrunk ){
          DbPage *pTrunk = sqlite3PagerLookup(pPager, iTrunk);
          iTrunk = get4byte((u8*)pTrunk->pData);
          if( iTrunk==0 ){
            put4byte((u8*)pTrunk->pData, iHTrunk);
          }
          sqlite3PagerUnref(pTrunk);
        };
      }

      if( nHPage<(pMap->iFirst-1) ){
        /* The database consisted of (pMap->iFirst-1) pages when the current
        ** concurrent transaction was opened. And an concurrent transaction may
        ** not be executed on an auto-vacuum database - so the db should 
        ** not have shrunk since the transaction was opened. Therefore nHPage
        ** should be set to (pMap->iFirst-1) or greater. */
        rc = SQLITE_CORRUPT_BKPT;
      }else{
        /* The current transaction allocated pages pMap->iFirst through
        ** nPage (inclusive) at the end of the database file. Meanwhile,
        ** other transactions have allocated (iFirst..nHPage). So move
        ** pages (iFirst..MIN(nPage,nHPage)) to (MAX(nPage,nHPage)+1). */
        Pgno iLast = MIN(nPage, nHPage);    /* Last page to move */
        Pgno nCurrent;                      /* Current size of db */

        nCurrent = MAX(nPage, nHPage);
        pBt->nPage = nCurrent;
        rc = btreeRelocateRange(pBt, pMap->iFirst, iLast, &nCurrent);

        /* There are now no collisions with the snapshot at the head of the
        ** database file. So at this point it would be possible to write
        ** the transaction out to disk. Before doing so though, attempt to
        ** relocate some of the new pages to free locations within the body
        ** of the database file (i.e. free-list entries). */
        if( rc==SQLITE_OK ){
          assert( nCurrent!=PENDING_BYTE_PAGE(pBt) );
          sqlite3PagerSetDbsize(pBt->pPager, nCurrent);
          nFree = get4byte(&p1[36]);
          nFin = nCurrent-nFree;
          if( nCurrent>PENDING_BYTE_PAGE(pBt) && nFin<=PENDING_BYTE_PAGE(pBt) ){
            nFin--;
          }
          nFin = MAX(nFin, nHPage);
          rc = btreeRelocateRange(pBt, nFin+1, nCurrent, 0);
        }

        put4byte(&p1[28], nFin);
      }
    }
    sqlite3PagerSetDbsize(pPager, nFin);
  }

  return rc;
}
#else
# define btreeFixUnlocked(X)  SQLITE_OK
#endif /* SQLITE_OMIT_CONCURRENT */

/*
** This routine does the first phase of a two-phase commit.  This routine
** causes a rollback journal to be created (if it does not already exist)
** and populated with enough information so that if a power loss occurs
** the database can be restored to its original state by playing back
** the journal.  Then the contents of the journal are flushed out to
** the disk.  After the journal is safely on oxide, the changes to the

int sqlite3BtreeCommitPhaseOne(Btree *p, const char *zSuperJrnl){
  int rc = SQLITE_OK;
  if( p->inTrans==TRANS_WRITE ){
    BtShared *pBt = p->pBt;
    sqlite3BtreeEnter(p);
#ifndef SQLITE_OMIT_AUTOVACUUM
    if( pBt->autoVacuum ){
      assert( ISCONCURRENT==0 );
      rc = autoVacuumCommit(p);
      if( rc!=SQLITE_OK ){
        sqlite3BtreeLeave(p);
        return rc;
      }
    }
    if( pBt->bDoTruncate ){
      sqlite3PagerTruncateImage(pBt->pPager, pBt->nPage);
    }
#endif
    if( rc==SQLITE_OK && ISCONCURRENT && p->db->eConcurrent==CONCURRENT_OPEN ){
      rc = btreeFixUnlocked(p);
    }
    if( rc==SQLITE_OK ){
    rc = sqlite3PagerCommitPhaseOne(pBt->pPager, zSuperJrnl, 0);
      rc = sqlite3PagerCommitPhaseOne(pBt->pPager, zSuperJrnl, 0);
    }
    sqlite3BtreeLeave(p);
  }
  return rc;
}

/*
** This function is called from both BtreeCommitPhaseTwo() and BtreeRollback()

    /* Set the current transaction state to TRANS_NONE and unlock the
    ** pager if this call closed the only read or write transaction.  */
    p->inTrans = TRANS_NONE;
    unlockBtreeIfUnused(pBt);
  }

  /* If this was an CONCURRENT transaction, delete the pBt->pMap object.
  ** Also call PagerEndConcurrent() to ensure that the pager has discarded
  ** the record of all pages read within the transaction.  */
  btreePtrmapDelete(pBt);
  sqlite3PagerEndConcurrent(pBt->pPager);
  btreeIntegrity(p);
}

/*
** Commit the transaction currently in progress.
**
** This routine implements the second phase of a 2-phase commit.  The

  assert( pBt->inTransaction==TRANS_WRITE );
  /* At the pager level, a statement transaction is a savepoint with
  ** an index greater than all savepoints created explicitly using
  ** SQL statements. It is illegal to open, release or rollback any
  ** such savepoints while the statement transaction savepoint is active.
  */
  rc = sqlite3PagerOpenSavepoint(pBt->pPager, iStatement);
  if( rc==SQLITE_OK ){
    rc = btreePtrmapBegin(pBt, iStatement);
  }
  sqlite3BtreeLeave(p);
  return rc;
}

/*
** The second argument to this function, op, is always SAVEPOINT_ROLLBACK
** or SAVEPOINT_RELEASE. This function either releases or rolls back the

int sqlite3BtreeSavepoint(Btree *p, int op, int iSavepoint){
  int rc = SQLITE_OK;
  if( p && p->inTrans==TRANS_WRITE ){
    BtShared *pBt = p->pBt;
    assert( op==SAVEPOINT_RELEASE || op==SAVEPOINT_ROLLBACK );
    assert( iSavepoint>=0 || (iSavepoint==-1 && op==SAVEPOINT_ROLLBACK) );
    sqlite3BtreeEnter(p);
    btreePtrmapEnd(pBt, op, iSavepoint);
    if( op==SAVEPOINT_ROLLBACK ){
      rc = saveAllCursors(pBt, 0, 0);
    }
    if( rc==SQLITE_OK ){
      rc = sqlite3PagerSavepoint(pBt->pPager, op, iSavepoint);
    }
    if( rc==SQLITE_OK ){

         && &pBuf[-4]>=pBufStart                               /* (6) */
        ){
          sqlite3_file *fd = sqlite3PagerFile(pBt->pPager);
          u8 aSave[4];
          u8 *aWrite = &pBuf[-4];
          assert( aWrite>=pBufStart );                         /* due to (6) */
          memcpy(aSave, aWrite, 4);
          rc = sqlite3PagerUsePage(pBt->pPager, nextPage);
          if( rc!=SQLITE_OK ) break;
          rc = sqlite3OsRead(fd, aWrite, a+4, (i64)pBt->pageSize*(nextPage-1));
          nextPage = get4byte(aWrite);
          memcpy(aWrite, aSave, 4);
        }else
#endif

        {
          DbPage *pDbPage;
          rc = sqlite3PagerGet(pBt->pPager, nextPage, &pDbPage,
              (eOp==0 ? PAGER_GET_READONLY : 0)
          );
          if( rc==SQLITE_OK ){
            setMempageRoot(
                (MemPage*)sqlite3PagerGetExtra(pDbPage), pCur->pgnoRoot
            );
            aPayload = sqlite3PagerGetData(pDbPage);
            nextPage = get4byte(aPayload);
            rc = copyPayload(&aPayload[offset+4], pBuf, a, eOp, pDbPage);
            sqlite3PagerUnref(pDbPage);
            offset = 0;
          }
        }

**
** This function returns SQLITE_CORRUPT if the page-header flags field of
** the new child page does not match the flags field of the parent (i.e.
** if an intkey page appears to be the parent of a non-intkey page, or
** vice-versa).
*/
static int moveToChild(BtCursor *pCur, u32 newPgno){
  BtShared *pBt = pCur->pBt;
  int rc;
  assert( cursorOwnsBtShared(pCur) );
  assert( pCur->eState==CURSOR_VALID );
  assert( pCur->iPage<BTCURSOR_MAX_DEPTH );
  assert( pCur->iPage>=0 );
  if( pCur->iPage>=(BTCURSOR_MAX_DEPTH-1) ){
    return SQLITE_CORRUPT_BKPT;
  }
  pCur->info.nSize = 0;
  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
  pCur->aiIdx[pCur->iPage] = pCur->ix;
  pCur->apPage[pCur->iPage] = pCur->pPage;
  pCur->ix = 0;
  pCur->iPage++;
  rc = getAndInitPage(pCur->pBt, newPgno, &pCur->pPage, pCur->curPagerFlags);
  rc = getAndInitPage(pBt, newPgno, &pCur->pPage, pCur->curPagerFlags);
  assert( pCur->pPage!=0 || rc!=SQLITE_OK );
  if( rc==SQLITE_OK
   && (pCur->pPage->nCell<1 || pCur->pPage->intKey!=pCur->curIntKey)
  if( rc==SQLITE_OK ){
    assert( pCur->pPage!=0 );
    setMempageRoot(pCur->pPage, pCur->pgnoRoot);
    if( pCur->pPage->nCell<1 || pCur->pPage->intKey!=pCur->curIntKey ){
  ){
    releasePage(pCur->pPage);
    rc = SQLITE_CORRUPT_PGNO(newPgno);
      releasePage(pCur->pPage);
      rc = SQLITE_CORRUPT_PGNO(newPgno);
    }
  }
  if( rc ){
    pCur->pPage = pCur->apPage[--pCur->iPage];
  }
  return rc;
}

    }
    rc = getAndInitPage(pCur->pBt, pCur->pgnoRoot, &pCur->pPage,
                        pCur->curPagerFlags);
    if( rc!=SQLITE_OK ){
      pCur->eState = CURSOR_INVALID;
      return rc;
    }
    setMempageRoot(pCur->pPage, pCur->pgnoRoot);
    pCur->iPage = 0;
    pCur->curIntKey = pCur->pPage->intKey;
  }
  pRoot = pCur->pPage;
  assert( pRoot->pgno==pCur->pgnoRoot || CORRUPT_DB );

  /* If pCur->pKeyInfo is not NULL, then the caller that opened this cursor

      releasePage(pCur->pPage);
      rc = SQLITE_CORRUPT_PGNO(chldPg);
    }
    if( rc ){
      pCur->pPage = pCur->apPage[--pCur->iPage];
      break;
    }
    setMempageRoot(pCur->pPage, pCur->pgnoRoot);
    /*
    ***** End of in-lined moveToChild() call */
 }
moveto_index_finish:
  pCur->info.nSize = 0;
  assert( (pCur->curFlags & BTCF_ValidOvfl)==0 );
  return rc;

  u32 n;     /* Number of pages on the freelist */
  u32 k;     /* Number of leaves on the trunk of the freelist */
  MemPage *pTrunk = 0;
  MemPage *pPrevTrunk = 0;
  Pgno mxPage;     /* Total size of the database file */

  assert( sqlite3_mutex_held(pBt->mutex) );
  assert( eMode==BTALLOC_ANY || (nearby>0 && IfNotOmitAV(pBt->autoVacuum)) );
  assert( eMode==BTALLOC_ANY || (nearby>0 && REQUIRE_PTRMAP ) );
  pPage1 = pBt->pPage1;
  mxPage = btreePagecount(pBt);
  /* EVIDENCE-OF: R-21003-45125 The 4-byte big-endian integer at offset 36
  ** stores the total number of pages on the freelist. */
  n = get4byte(&pPage1->aData[36]);
  testcase( n==mxPage-1 );
  if( n>=mxPage ){
    return SQLITE_CORRUPT_BKPT;
  }

  /* Ensure page 1 is writable. This function will either change the number
  ** of pages in the free-list or the size of the database file. Since both
  ** of these operations involve modifying page 1 header fields, page 1
  ** will definitely be written by this transaction. If this is an CONCURRENT
  ** transaction, ensure the BtreePtrmap structure has been allocated.  */
  rc = sqlite3PagerWrite(pPage1->pDbPage);
  if( rc ) return rc;

  if( n>0 ){
    /* There are pages on the freelist.  Reuse one of those pages. */
    Pgno iTrunk;
    u8 searchList = 0; /* If the free-list must be searched for 'nearby' */
    u32 nSearch = 0;   /* Count of the number of search attempts */
   
    /* If eMode==BTALLOC_EXACT and a query of the pointer-map
    ** shows that the page 'nearby' is somewhere on the free-list, then
    ** the entire-list will be searched for that page.
    */
#ifndef SQLITE_OMIT_AUTOVACUUM
    if( eMode==BTALLOC_EXACT ){
      assert( ISAUTOVACUUM(pBt)!=ISCONCURRENT );
      if( ISAUTOVACUUM(pBt) ){
      if( nearby<=mxPage ){
        u8 eType;
        assert( nearby>0 );
        assert( pBt->autoVacuum );
        rc = ptrmapGet(pBt, nearby, &eType, 0);
        if( rc ) return rc;
        if( eType==PTRMAP_FREEPAGE ){
          searchList = 1;
        }
        if( nearby<=mxPage ){
          u8 eType;
          assert( nearby>0 );
          assert( pBt->autoVacuum );
          rc = ptrmapGet(pBt, nearby, &eType, 0);
          if( rc ) return rc;
          if( eType==PTRMAP_FREEPAGE ){
            searchList = 1;
          }
        }
      }else{
        searchList = 1;
      }
    }else if( eMode==BTALLOC_LE ){
      searchList = 1;
    }
#endif

    /* Decrement the free-list count by 1. Set iTrunk to the index of the
    ** first free-list trunk page. iPrevTrunk is initially 1.
    */
    rc = sqlite3PagerWrite(pPage1->pDbPage);
    if( rc ) return rc;
    put4byte(&pPage1->aData[36], n-1);

    /* The code within this loop is run only once if the 'searchList' variable
    ** is not true. Otherwise, it runs once for each trunk-page on the
    ** free-list until the page 'nearby' is located (eMode==BTALLOC_EXACT)
    ** or until a page less than 'nearby' is located (eMode==BTALLOC_LT)
    */

    }
    memset(pPage->aData, 0, pPage->pBt->pageSize);
  }

  /* If the database supports auto-vacuum, write an entry in the pointer-map
  ** to indicate that the page is free.
  */
  if( ISAUTOVACUUM(pBt) ){
  if( REQUIRE_PTRMAP ){
    ptrmapPut(pBt, iPage, PTRMAP_FREEPAGE, 0, &rc);
    if( rc ) goto freepage_out;
  }

  /* Now manipulate the actual database free-list structure. There are two
  ** possibilities. If the free-list is currently empty, or if the first
  ** trunk page in the free-list is full, then this page will become a

          pgnoOvfl++;
        } while(
          PTRMAP_ISPAGE(pBt, pgnoOvfl) || pgnoOvfl==PENDING_BYTE_PAGE(pBt)
        );
      }
#endif
      rc = allocateBtreePage(pBt, &pOvfl, &pgnoOvfl, pgnoOvfl, 0);
#ifndef SQLITE_OMIT_AUTOVACUUM

      /* If the database supports auto-vacuum, and the second or subsequent
      ** overflow page is being allocated, add an entry to the pointer-map
      ** for that page now.
      **
      ** If this is the first overflow page, then write a partial entry
      ** to the pointer-map. If we write nothing to this pointer-map slot,
      ** then the optimistic overflow chain processing in clearCell()
      ** may misinterpret the uninitialized values and delete the
      ** wrong pages from the database.
      */
      if( pBt->autoVacuum && rc==SQLITE_OK ){
      if( REQUIRE_PTRMAP && rc==SQLITE_OK ){
        u8 eType = (pgnoPtrmap?PTRMAP_OVERFLOW2:PTRMAP_OVERFLOW1);
        ptrmapPut(pBt, pgnoOvfl, eType, pgnoPtrmap, &rc);
        if( rc ){
          releasePage(pOvfl);
        }
      }
#endif
      if( rc ){
        releasePage(pToRelease);
        return rc;
      }

      /* If pToRelease is not zero than pPrior points into the data area
      ** of pToRelease.  Make sure pToRelease is still writeable. */

    ** sorted order.  This invariants arise because multiple overflows can
    ** only occur when inserting divider cells into the parent page during
    ** balancing, and the dividers are adjacent and sorted.
    */
    assert( j==0 || pPage->aiOvfl[j-1]<(u16)i ); /* Overflows in sorted order */
    assert( j==0 || i==pPage->aiOvfl[j-1]+1 );   /* Overflows are sequential */
  }else{
    BtShared *pBt = pPage->pBt;
    int rc = sqlite3PagerWrite(pPage->pDbPage);
    if( NEVER(rc!=SQLITE_OK) ){
      return rc;
    }
    assert( sqlite3PagerIswriteable(pPage->pDbPage) );
    data = pPage->aData;
    assert( &data[pPage->cellOffset]==pPage->aCellIdx );

    pIns = pPage->aCellIdx + i*2;
    memmove(pIns+2, pIns, 2*(pPage->nCell - i));
    put2byte(pIns, idx);
    pPage->nCell++;
    /* increment the cell count */
    if( (++data[pPage->hdrOffset+4])==0 ) data[pPage->hdrOffset+3]++;
    assert( get2byte(&data[pPage->hdrOffset+3])==pPage->nCell || CORRUPT_DB );
#ifndef SQLITE_OMIT_AUTOVACUUM
    if( pPage->pBt->autoVacuum ){
    if( REQUIRE_PTRMAP ){
      int rc2 = SQLITE_OK;
      /* The cell may contain a pointer to an overflow page. If so, write
      ** the entry for the overflow page into the pointer map.
      */
      ptrmapPutOvflPtr(pPage, pPage, pCell, &rc2);
      if( rc2 ) return rc2;
    }
#endif
  }
  return SQLITE_OK;
}

/*
** This variant of insertCell() assumes that the pTemp and iChild
** parameters are both zero.  Use this variant in sqlite3BtreeInsert()

    ** sorted order.  This invariants arise because multiple overflows can
    ** only occur when inserting divider cells into the parent page during
    ** balancing, and the dividers are adjacent and sorted.
    */
    assert( j==0 || pPage->aiOvfl[j-1]<(u16)i ); /* Overflows in sorted order */
    assert( j==0 || i==pPage->aiOvfl[j-1]+1 );   /* Overflows are sequential */
  }else{
    BtShared *pBt = pPage->pBt;
    int rc = sqlite3PagerWrite(pPage->pDbPage);
    if( rc!=SQLITE_OK ){
      return rc;
    }
    assert( sqlite3PagerIswriteable(pPage->pDbPage) );
    data = pPage->aData;
    assert( &data[pPage->cellOffset]==pPage->aCellIdx );
    rc = allocateSpace(pPage, sz, &idx);
    if( rc ){ return rc; }
    /* The allocateSpace() routine guarantees the following properties
    ** if it returns successfully */
    assert( idx >= 0 );
    assert( idx >= pPage->cellOffset+2*pPage->nCell+2 || CORRUPT_DB );
    assert( idx+sz <= (int)pPage->pBt->usableSize );
    assert( idx+sz <= (int)pBt->usableSize );
    pPage->nFree -= (u16)(2 + sz);
    memcpy(&data[idx], pCell, sz);
    pIns = pPage->aCellIdx + i*2;
    memmove(pIns+2, pIns, 2*(pPage->nCell - i));
    put2byte(pIns, idx);
    pPage->nCell++;
    /* increment the cell count */
    if( (++data[pPage->hdrOffset+4])==0 ) data[pPage->hdrOffset+3]++;
    assert( get2byte(&data[pPage->hdrOffset+3])==pPage->nCell || CORRUPT_DB );
#ifndef SQLITE_OMIT_AUTOVACUUM
    if( pPage->pBt->autoVacuum ){
    if( REQUIRE_PTRMAP ){
      int rc2 = SQLITE_OK;
      /* The cell may contain a pointer to an overflow page. If so, write
      ** the entry for the overflow page into the pointer map.
      */
      ptrmapPutOvflPtr(pPage, pPage, pCell, &rc2);
      if( rc2 ) return rc2;
    }
#endif
  }
  return SQLITE_OK;
}

/*
** The following parameters determine how many adjacent pages get involved
** in a balancing operation.  NN is the number of neighbors on either side

    ** cell on the page to an overflow page. If either of these
    ** operations fails, the return code is set, but the contents
    ** of the parent page are still manipulated by the code below.
    ** That is Ok, at this point the parent page is guaranteed to
    ** be marked as dirty. Returning an error code will cause a
    ** rollback, undoing any changes made to the parent page.
    */
    if( ISAUTOVACUUM(pBt) ){
    if( REQUIRE_PTRMAP ){
      ptrmapPut(pBt, pgnoNew, PTRMAP_BTREE, pParent->pgno, &rc);
      if( szCell>pNew->minLocal ){
        ptrmapPutOvflPtr(pNew, pNew, pCell, &rc);
      }
    }
 
    /* Create a divider cell to insert into pParent. The divider cell

      *pRC = rc;
      return;
    }
 
    /* If this is an auto-vacuum database, update the pointer-map entries
    ** for any b-tree or overflow pages that pTo now contains the pointers to.
    */
    if( ISAUTOVACUUM(pBt) ){
    if( REQUIRE_PTRMAP ){
      *pRC = setChildPtrmaps(pTo);
    }
  }
}

/*
** This routine redistributes cells on the iParentIdx'th child of pParent

** SQLITE_NOMEM.
*/
static int balance_nonroot(
  MemPage *pParent,               /* Parent page of siblings being balanced */
  int iParentIdx,                 /* Index of "the page" in pParent */
  u8 *aOvflSpace,                 /* page-size bytes of space for parent ovfl */
  int isRoot,                     /* True if pParent is a root-page */
  int bBulk                       /* True if this call is part of a bulk load */
  int bBulk,                      /* True if this call is part of a bulk load */
  Pgno pgnoRoot                   /* Root page of b-tree being balanced */
){
  BtShared *pBt;               /* The whole database */
  int nMaxCells = 0;           /* Allocated size of apCell, szCell, aFrom. */
  int nNew = 0;                /* Number of pages in apNew[] */
  int nOld;                    /* Number of pages in apOld[] */
  int i, j, k;                 /* Loop counters */
  int nxDiv;                   /* Next divider slot in pParent->aCell[] */

    if( rc==SQLITE_OK ){
      rc = getAndInitPage(pBt, pgno, &apOld[i], 0);
    }
    if( rc ){
      memset(apOld, 0, (i+1)*sizeof(MemPage*));
      goto balance_cleanup;
    }
    setMempageRoot(apOld[i], pgnoRoot);
    if( apOld[i]->nFree<0 ){
      rc = btreeComputeFreeSpace(apOld[i]);
      if( rc ){
        memset(apOld, 0, (i)*sizeof(MemPage*));
        goto balance_cleanup;
      }
    }

      if( rc ) goto balance_cleanup;
      zeroPage(pNew, pageFlags);
      apNew[i] = pNew;
      nNew++;
      cntOld[i] = b.nCell;

      /* Set the pointer-map entry for the new sibling page. */
      if( ISAUTOVACUUM(pBt) ){
      if( REQUIRE_PTRMAP ){
        ptrmapPut(pBt, pNew->pgno, PTRMAP_BTREE, pParent->pgno, &rc);
        if( rc!=SQLITE_OK ){
          goto balance_cleanup;
        }
      }
    }
  }

  **      with the cell.
  **
  ** If the sibling pages are not leaves, then the pointer map entry
  ** associated with the right-child of each sibling may also need to be
  ** updated. This happens below, after the sibling pages have been
  ** populated, not here.
  */
  if( ISAUTOVACUUM(pBt) ){
  if( REQUIRE_PTRMAP ){
    MemPage *pOld;
    MemPage *pNew = pOld = apNew[0];
    int cntOldNext = pNew->nCell + pNew->nOverflow;
    int iNew = 0;
    int iOld = 0;

    for(i=0; i<b.nCell; i++){

    assert( apNew[0]->nFree ==
        (get2byteNotZero(&apNew[0]->aData[5]) - apNew[0]->cellOffset
          - apNew[0]->nCell*2)
      || rc!=SQLITE_OK
    );
    copyNodeContent(apNew[0], pParent, &rc);
    freePage(apNew[0], &rc);
  }else if( ISAUTOVACUUM(pBt) && !leafCorrection ){
  }else if( REQUIRE_PTRMAP && !leafCorrection ){
    /* Fix the pointer map entries associated with the right-child of each
    ** sibling page. All other pointer map entries have already been taken
    ** care of.  */
    for(i=0; i<nNew; i++){
      u32 key = get4byte(&apNew[i]->aData[8]);
      ptrmapPut(pBt, key, PTRMAP_BTREE, apNew[i]->pgno, &rc);
    }

  ** page that will become the new right-child of pPage. Copy the contents
  ** of the node stored on pRoot into the new child page.
  */
  rc = sqlite3PagerWrite(pRoot->pDbPage);
  if( rc==SQLITE_OK ){
    rc = allocateBtreePage(pBt,&pChild,&pgnoChild,pRoot->pgno,0);
    copyNodeContent(pRoot, pChild, &rc);
    if( ISAUTOVACUUM(pBt) ){
    if( REQUIRE_PTRMAP ){
      ptrmapPut(pBt, pgnoChild, PTRMAP_BTREE, pRoot->pgno, &rc);
    }
  }
  if( rc ){
    *ppChild = 0;
    releasePage(pChild);
    return rc;

          ** has completed, it is safe to release the pSpace buffer used by
          ** the previous call, as the overflow cell data will have been
          ** copied either into the body of a database page or into the new
          ** pSpace buffer passed to the latter call to balance_nonroot().
          */
          u8 *pSpace = sqlite3PageMalloc(pCur->pBt->pageSize);
          rc = balance_nonroot(pParent, iIdx, pSpace, iPage==1,
                               pCur->hints&BTREE_BULKLOAD);
                               pCur->hints&BTREE_BULKLOAD, pCur->pgnoRoot);
          if( pFree ){
            /* If pFree is not NULL, it points to the pSpace buffer used
            ** by a previous call to balance_nonroot(). Its contents are
            ** now stored either on real database pages or within the
            ** new pSpace buffer, so it may be safely freed here. */
            sqlite3PageFree(pFree);
          }

  assert( iOffset>=0 );
  ovflPgno = get4byte(pCur->info.pPayload + iOffset);
  pBt = pPage->pBt;
  ovflPageSize = pBt->usableSize - 4;
  do{
    rc = btreeGetPage(pBt, ovflPgno, &pPage, 0);
    if( rc ) return rc;
    setMempageRoot(pPage, pCur->pgnoRoot);
    if( sqlite3PagerPageRefcount(pPage->pDbPage)!=1 || pPage->isInit ){
      rc = SQLITE_CORRUPT_PAGE(pPage);
    }else{
      if( iOffset+ovflPageSize<(u32)nTotal ){
        ovflPgno = get4byte(pPage->aData);
      }else{
        ovflPageSize = nTotal - iOffset;

  }
  assert( szNew==pPage->xCellSize(pPage, newCell) );
  assert( szNew <= MX_CELL_SIZE(p->pBt) );
  idx = pCur->ix;
  pCur->info.nSize = 0;
  if( loc==0 ){
    CellInfo info;
    BtShared *pBt = p->pBt;
    assert( idx>=0 );
    if( idx>=pPage->nCell ){
      return SQLITE_CORRUPT_PAGE(pPage);
    }
    rc = sqlite3PagerWrite(pPage->pDbPage);
    if( rc ){
      goto end_insert;
    }
    oldCell = findCell(pPage, idx);
    if( !pPage->leaf ){
      memcpy(newCell, oldCell, 4);
    }
    BTREE_CLEAR_CELL(rc, pPage, oldCell, info);
    testcase( pCur->curFlags & BTCF_ValidOvfl );
    invalidateOverflowCache(pCur);
    if( info.nSize==szNew && info.nLocal==info.nPayload
     && (!ISAUTOVACUUM(p->pBt) || szNew<pPage->minLocal)
     && (!REQUIRE_PTRMAP || szNew<pPage->minLocal)
    ){
      /* Overwrite the old cell with the new if they are the same size.
      ** We could also try to do this if the old cell is smaller, then add
      ** the leftover space to the free list.  But experiments show that
      ** doing that is no faster then skipping this optimization and just
      ** calling dropCell() and insertCell().
      **

          aIn += nCopy;
        }
        if( nOut>0 ){
          sqlite3PagerUnref(pPageIn);
          pPageIn = 0;
          rc = sqlite3PagerGet(pSrcPager, ovflIn, &pPageIn, PAGER_GET_READONLY);
          if( rc==SQLITE_OK ){
            setMempageRoot(
                (MemPage*)sqlite3PagerGetExtra(pPageIn), pSrc->pgnoRoot
            );
            aIn = (const u8*)sqlite3PagerGetData(pPageIn);
            ovflIn = get4byte(aIn);
            aIn += 4;
            nIn = pSrc->pBt->usableSize - 4;
          }
        }
      }while( rc==SQLITE_OK && nOut>0 );

** Erase the given database page and all its children.  Return
** the page to the freelist.
*/
static int clearDatabasePage(
  BtShared *pBt,           /* The BTree that contains the table */
  Pgno pgno,               /* Page number to clear */
  int freePageFlag,        /* Deallocate page if true */
  i64 *pnChange            /* Add number of Cells freed to this counter */
  i64 *pnChange,           /* Add number of Cells freed to this counter */
  Pgno pgnoRoot
){
  MemPage *pPage;
  int rc;
  unsigned char *pCell;
  int i;
  int hdr;
  CellInfo info;

  assert( sqlite3_mutex_held(pBt->mutex) );
  if( pgno>btreePagecount(pBt) ){
    return SQLITE_CORRUPT_PGNO(pgno);
  }
  rc = getAndInitPage(pBt, pgno, &pPage, 0);
  if( rc ) return rc;
  setMempageRoot(pPage, pgnoRoot);
  if( (pBt->openFlags & BTREE_SINGLE)==0
   && sqlite3PagerPageRefcount(pPage->pDbPage) != (1 + (pgno==1))
  ){
    rc = SQLITE_CORRUPT_PAGE(pPage);
    goto cleardatabasepage_out;
  }
  hdr = pPage->hdrOffset;
  for(i=0; i<pPage->nCell; i++){
    pCell = findCell(pPage, i);
    if( !pPage->leaf ){
      rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange);
      rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange, pgnoRoot);
      if( rc ) goto cleardatabasepage_out;
    }
    BTREE_CLEAR_CELL(rc, pPage, pCell, info);
    if( rc ) goto cleardatabasepage_out;
  }
  if( !pPage->leaf ){
    rc = clearDatabasePage(
    rc = clearDatabasePage(pBt, get4byte(&pPage->aData[hdr+8]), 1, pnChange);
        pBt, get4byte(&pPage->aData[hdr+8]), 1, pnChange, pgnoRoot
    );
    if( rc ) goto cleardatabasepage_out;
    if( pPage->intKey ) pnChange = 0;
  }
  if( pnChange ){
    testcase( !pPage->intKey );
    *pnChange += pPage->nCell;
  }

  if( SQLITE_OK==rc ){
    /* Invalidate all incrblob cursors open on table iTable (assuming iTable
    ** is the root of a table b-tree - if it is not, the following call is
    ** a no-op).  */
    if( p->hasIncrblobCur ){
      invalidateIncrblobCursors(p, (Pgno)iTable, 0, 1);
    }
    rc = clearDatabasePage(pBt, (Pgno)iTable, 0, pnChange);
    rc = clearDatabasePage(pBt, (Pgno)iTable, 0, pnChange, (Pgno)iTable);
  }
  sqlite3BtreeLeave(p);
  return rc;
}

/*
** Delete all information from the single table that pCur is open on.

      sCheck.v0 = aRoot[i];
      checkTreePage(&sCheck, aRoot[i], &notUsed, LARGEST_INT64);
    }
    sqlite3MemSetArrayInt64(aCnt, i, sCheck.nRow);
  }
  pBt->db->flags = savedDbFlags;

  /* Make sure every page in the file is referenced
  */
  if( !bPartial ){
    /* Make sure every page in the file is referenced. Skip this if the
    ** database is currently being written by a CONCURRENT transaction (it 
    ** may fail as pages that were part of the free-list when the transaction
    ** was opened cannot be counted).  */
    for(i=1; i<=sCheck.nCkPage && sCheck.mxErr; i++){
    for(i=1; ISCONCURRENT==0 && i<=sCheck.nCkPage && sCheck.mxErr; i++){
#ifdef SQLITE_OMIT_AUTOVACUUM
      if( getPageReferenced(&sCheck, i)==0 ){
        checkAppendMsg(&sCheck, "Page %u: never used", i);
      }
#else
      /* If the database supports auto-vacuum, make sure no tables contain
      ** references to pointer-map pages.

  return (p->pBt->btsFlags & BTS_READ_ONLY)!=0;
}

/*
** Return the size of the header added to each page by this module.
*/
int sqlite3HeaderSizeBtree(void){ return ROUND8(sizeof(MemPage)); }

/*
** This function is called to ensure that all locks required to commit the
** current write-transaction to the database file are held. If the db is
** in rollback mode, this means the EXCLUSIVE lock on the database file.
**
** Or, if this is an CONCURRENT transaction on a wal-mode database, the WRITER
** lock on the wal file. In this case this function also checks that the
** CONCURRENT transaction can be safely committed (does not commit with any
** other transaction committed since it was opened).
**
** SQLITE_OK is returned if successful. SQLITE_BUSY if the required locks
** cannot be obtained due to a conflicting lock. If the locks cannot be
** obtained for an CONCURRENT transaction due to a conflict with an already
** committed transaction, SQLITE_BUSY_SNAPSHOT is returned. Otherwise, if
** some other error (OOM, IO, etc.) occurs, the relevant SQLite error code
** is returned.
*/
int sqlite3BtreeExclusiveLock(Btree *p){
  int rc;
  Pgno pgno = 0;
  BtShared *pBt = p->pBt;
  assert( p->inTrans==TRANS_WRITE && pBt->pPage1 );
  sqlite3BtreeEnter(p);
  rc = sqlite3PagerExclusiveLock(pBt->pPager, 
    (p->db->eConcurrent==CONCURRENT_SCHEMA) ? 0 : pBt->pPage1->pDbPage,
    &pgno
  );
#ifdef SQLITE_OMIT_CONCURRENT
  assert( pgno==0 );
#else
  if( rc==SQLITE_BUSY_SNAPSHOT && pgno ){
    PgHdr *pPg = 0;
    int rc2 = sqlite3PagerGet(pBt->pPager, pgno, &pPg, 0);
    if( rc2==SQLITE_OK ){
      int bWrite = -1;
      const char *zObj = 0;
      const char *zTab = 0;
      char zContent[17];

      if( pPg ){
        Pgno pgnoRoot = 0;
        HashElem *pE;
        Schema *pSchema;
        u8 *aData = (u8*)sqlite3PagerGetData(pPg);
        int i;
        for(i=0; i<8; i++){
          static const char hexdigits[] = {
            '0', '1', '2', '3', '4', '5', '6', '7',
            '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' 
          };
          zContent[i*2] = hexdigits[(aData[i] >> 4)];
          zContent[i*2+1] = hexdigits[(aData[i] & 0xF)];
        }
        zContent[16] = '\0';

        pgnoRoot = ((MemPage*)sqlite3PagerGetExtra(pPg))->pgnoRoot;
        bWrite = sqlite3PagerIswriteable(pPg);
        sqlite3PagerUnref(pPg);

        pSchema = sqlite3SchemaGet(p->db, p);
        if( pSchema ){
          for(pE=sqliteHashFirst(&pSchema->tblHash); pE; pE=sqliteHashNext(pE)){
            Table *pTab = (Table *)sqliteHashData(pE);
            if( pTab->tnum==pgnoRoot ){
              zObj = pTab->zName;
              zTab = 0;
            }else{
              Index *pIdx;
              for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
                if( pIdx->tnum==pgnoRoot ){
                  zObj = pIdx->zName;
                  zTab = pTab->zName;
                }
              }
            }
          }
        }
      }

      sqlite3_log(SQLITE_OK,
          "cannot commit CONCURRENT transaction "
          "- conflict at page %d "
          "(%s page; part of db %s %s%s%s; content=%s...)",
          (int)pgno,
          (bWrite==0?"read-only":(bWrite>0?"read/write":"unknown")),
          (zTab ? "index" : "table"),
          (zTab ? zTab : ""), (zTab ? "." : ""), (zObj ? zObj : "UNKNOWN"),
          zContent
      );
    }
  }
#endif
  sqlite3BtreeLeave(p);
  return rc;
}

/*
** If no transaction is active and the database is not a temp-db, clear
** the in-memory pager cache.
*/
void sqlite3BtreeClearCache(Btree *p){
  BtShared *pBt = p->pBt;

int sqlite3HeaderSizeBtree(void);

#ifdef SQLITE_DEBUG
sqlite3_uint64 sqlite3BtreeSeekCount(Btree*);
#else
# define sqlite3BtreeSeekCount(X) 0
#endif

int sqlite3BtreeExclusiveLock(Btree *pBt);

#ifndef NDEBUG
int sqlite3BtreeCursorIsValid(BtCursor*);
#endif
int sqlite3BtreeCursorIsValidNN(BtCursor*);

int sqlite3BtreeCount(sqlite3*, BtCursor*, i64*);

*/
#define MX_CELL(pBt) ((pBt->pageSize-8)/6)

/* Forward declarations */
typedef struct MemPage MemPage;
typedef struct BtLock BtLock;
typedef struct CellInfo CellInfo;
typedef struct BtreePtrmap BtreePtrmap;

/*
** This is a magic string that appears at the beginning of every
** SQLite database in order to identify the file as a real database.
**
** You can change this value at compile-time by specifying a
** -DSQLITE_FILE_HEADER="..." on the compiler command-line.  The

** stored in MemPage.pBt->mutex.
*/
struct MemPage {
  u8 isInit;           /* True if previously initialized. MUST BE FIRST! */
  u8 intKey;           /* True if table b-trees.  False for index b-trees */
  u8 intKeyLeaf;       /* True if the leaf of an intKey table */
  Pgno pgno;           /* Page number for this page */
#ifndef SQLITE_OMIT_CONCURRENT
  Pgno pgnoRoot;       /* Root page of b-tree that this page belongs to */
#endif
  /* Only the first 8 bytes (above) are zeroed by pager.c when a new page
  ** is allocated. All fields that follow must be initialized before use */
  u8 leaf;             /* True if a leaf page */
  u8 hdrOffset;        /* 100 for page 1.  0 otherwise */
  u8 childPtrSize;     /* 0 if leaf==1.  4 if leaf==0 */
  u8 max1bytePayload;  /* min(maxLocal,127) */
  u8 nOverflow;        /* Number of overflow cell bodies in aCell[] */

#ifndef SQLITE_OMIT_SHARED_CACHE
  int nRef;             /* Number of references to this structure */
  BtShared *pNext;      /* Next on a list of sharable BtShared structs */
  BtLock *pLock;        /* List of locks held on this shared-btree struct */
  Btree *pWriter;       /* Btree with currently open write transaction */
#endif
  u8 *pTmpSpace;        /* Temp space sufficient to hold a single cell */
#ifndef SQLITE_OMIT_CONCURRENT
  BtreePtrmap *pMap;
#endif
  int nPreformatSize;   /* Size of last cell written by TransferRow() */
};

/*
** Allowed values for BtShared.btsFlags
*/
#define BTS_READ_ONLY        0x0001   /* Underlying file is readonly */

/*
** The ISAUTOVACUUM macro is used within balance_nonroot() to determine
** if the database supports auto-vacuum or not. Because it is used
** within an expression that is an argument to another macro 
** (sqliteMallocRaw), it is not possible to use conditional compilation.
** So, this macro is defined instead.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
#define ISAUTOVACUUM(pBt) (pBt->autoVacuum)
#ifdef SQLITE_OMIT_AUTOVACUUM
#define ISAUTOVACUUM(pBt) 0
#else
#define ISAUTOVACUUM(pBt) 0
#define ISAUTOVACUUM(pBt) (pBt->autoVacuum)
#endif

#ifdef SQLITE_OMIT_CONCURRENT
# define ISCONCURRENT 0
#else
# define ISCONCURRENT (pBt->pMap!=0)
#endif

#define REQUIRE_PTRMAP (ISAUTOVACUUM(pBt) || ISCONCURRENT)

/*
** This structure is passed around through all the PRAGMA integrity_check
** checking routines in order to keep track of some global state information.
**
** The aRef[] array is allocated so that there is 1 bit for each page in
** the database. As the integrity-check proceeds, for each page used in

void sqlite3TableLock(
  Parse *pParse,     /* Parsing context */
  int iDb,           /* Index of the database containing the table to lock */
  Pgno iTab,         /* Root page number of the table to be locked */
  u8 isWriteLock,    /* True for a write lock */
  const char *zName  /* Name of the table to be locked */
){
#ifdef SQLITE_OMIT_CONCURRENT
  if( iDb==1 ) return;
  if( !sqlite3BtreeSharable(pParse->db->aDb[iDb].pBt) ) return;
#endif
  lockTable(pParse, iDb, iTab, isWriteLock, zName);
}

/*
** Code an OP_TableLock instruction for each table locked by the
** statement (configured by calls to sqlite3TableLock()).
*/

  db = pParse->db;
  assert( db!=0 );
  if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "BEGIN", 0, 0) ){
    return;
  }
  v = sqlite3GetVdbe(pParse);
  if( !v ) return;
  if( type!=TK_DEFERRED ){
  if( type==TK_IMMEDIATE || type==TK_EXCLUSIVE ){
    for(i=0; i<db->nDb; i++){
      int eTxnType;
      Btree *pBt = db->aDb[i].pBt;
      if( pBt && sqlite3BtreeIsReadonly(pBt) ){
        eTxnType = 0;  /* Read txn */
      }else if( type==TK_EXCLUSIVE ){
        eTxnType = 2;  /* Exclusive txn */
      }else{
        eTxnType = 1;  /* Write txn */
      }
      sqlite3VdbeAddOp2(v, OP_Transaction, i, eTxnType);
      sqlite3VdbeUsesBtree(v, i);
    }
  }
  sqlite3VdbeAddOp0(v, OP_AutoCommit);
  sqlite3VdbeAddOp3(v, OP_AutoCommit, 0, 0, (type==TK_CONCURRENT));
}

/*
** Generate VDBE code for a COMMIT or ROLLBACK statement.
** Code for ROLLBACK is generated if eType==TK_ROLLBACK.  Otherwise
** code is generated for a COMMIT.
*/

*/
static void randomFunc(
  sqlite3_context *context,
  int NotUsed,
  sqlite3_value **NotUsed2
){
  sqlite_int64 r;
  sqlite3 *db = sqlite3_context_db_handle(context);
  UNUSED_PARAMETER2(NotUsed, NotUsed2);
  sqlite3_randomness(sizeof(r), &r);
  sqlite3FastRandomness(&db->sPrng, sizeof(r), &r);
  if( r<0 ){
    /* We need to prevent a random number of 0x8000000000000000
    ** (or -9223372036854775808) since when you do abs() of that
    ** number of you get the same value back again.  To do this
    ** in a way that is testable, mask the sign bit off of negative
    ** values, resulting in a positive value.  Then take the
    ** 2s complement of that positive value.  The end result can

static void randomBlob(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  sqlite3_int64 n;
  unsigned char *p;
  sqlite3 *db = sqlite3_context_db_handle(context);
  assert( argc==1 );
  UNUSED_PARAMETER(argc);
  n = sqlite3_value_int64(argv[0]);
  if( n<1 ){
    n = 1;
  }
  p = contextMalloc(context, n);
  if( p ){
    sqlite3_randomness(n, p);
    sqlite3FastRandomness(&db->sPrng, n, p);
    sqlite3_result_blob(context, (char*)p, n, sqlite3_free);
  }
}

/*
** Implementation of the last_insert_rowid() SQL function.  The return
** value is the same as the sqlite3_last_insert_rowid() API function.

  sqlite3_mutex_enter(db->mutex);
  db->errMask = (flags & SQLITE_OPEN_EXRESCODE)!=0 ? 0xffffffff : 0xff;
  db->nDb = 2;
  db->eOpenState = SQLITE_STATE_BUSY;
  db->aDb = db->aDbStatic;
  db->lookaside.bDisable = 1;
  db->lookaside.sz = 0;

  sqlite3FastPrngInit(&db->sPrng);
  assert( sizeof(db->aLimit)==sizeof(aHardLimit) );
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS;
  db->autoCommit = 1;
  db->nextAutovac = -1;
  db->szMmap = sqlite3GlobalConfig.szMmap;
  db->nextPagesize = 0;

/*
** Free a snapshot handle obtained from sqlite3_snapshot_get().
*/
void sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){
  sqlite3_free(pSnapshot);
}
#endif /* SQLITE_ENABLE_SNAPSHOT */

SQLITE_EXPERIMENTAL int sqlite3_wal_info(
  sqlite3 *db, const char *zDb, 
  unsigned int *pnPrior, unsigned int *pnFrame
){
  int rc = SQLITE_OK;

#ifndef SQLITE_OMIT_WAL
  Btree *pBt;
  int iDb;

#ifdef SQLITE_ENABLE_API_ARMOR
  if( !sqlite3SafetyCheckOk(db) ){
    return SQLITE_MISUSE_BKPT;
  }
#endif

  sqlite3_mutex_enter(db->mutex);
  iDb = sqlite3FindDbName(db, zDb);
  if( iDb<0 ){
    return SQLITE_ERROR;
  }
  pBt = db->aDb[iDb].pBt;
  rc = sqlite3PagerWalInfo(sqlite3BtreePager(pBt), pnPrior, pnFrame);
  sqlite3_mutex_leave(db->mutex);
#endif   /* SQLITE_OMIT_WAL */

  return rc;
}

#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
/*
** Given the name of a compile-time option, return true if that option
** was used and false if not.
**
** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix

#if SQLITE_ENABLE_LOCKING_STYLE
  unsigned long long sharedByte;  /* for AFP simulated shared lock */
#endif
#if OS_VXWORKS
  sem_t *pSem;                    /* Named POSIX semaphore */
  char aSemName[MAX_PATHNAME+2];  /* Name of that semaphore */
#endif
#ifdef SQLITE_SHARED_MAPPING
  sqlite3_int64 nSharedMapping;   /* Size of mapped region in bytes */
  void *pSharedMapping;           /* Memory mapped region */
#endif
};

/*
** A lists of all unixInodeInfo objects.
**
** Must hold unixBigLock in order to read or write this variable.
*/

  unixInodeInfo *pInode = pFile->pInode;
  assert( unixMutexHeld() );
  assert( unixFileMutexNotheld(pFile) );
  if( ALWAYS(pInode) ){
    pInode->nRef--;
    if( pInode->nRef==0 ){
      assert( pInode->pShmNode==0 );
#ifdef SQLITE_SHARED_MAPPING
      if( pInode->pSharedMapping ){
        osMunmap(pInode->pSharedMapping, pInode->nSharedMapping);
        pInode->pSharedMapping = 0;
        pInode->nSharedMapping = 0;
      }
#endif
      sqlite3_mutex_enter(pInode->pLockMutex);
      closePendingFds(pFile);
      sqlite3_mutex_leave(pInode->pLockMutex);
      if( pInode->pPrev ){
        assert( pInode->pPrev->pNext==pInode );
        pInode->pPrev->pNext = pInode->pNext;
      }else{

  return SQLITE_OK;
}

/*
** Close the file.
*/
static int nolockClose(sqlite3_file *id) {
#ifdef SQLITE_SHARED_MAPPING
  unixFile *pFd = (unixFile*)id;
  if( pFd->pInode ){
    unixEnterMutex();
    releaseInodeInfo(pFd);
    unixLeaveMutex();
  }
#endif
  return closeUnixFile(id);
}

/******************* End of the no-op lock implementation *********************
******************************************************************************/

/******************************************************************************

      if( newLimit>0 && sizeof(size_t)<8 ){
        newLimit = (newLimit & 0x7FFFFFFF);
      }

      *(i64*)pArg = pFile->mmapSizeMax;
      if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){
        pFile->mmapSizeMax = newLimit;
#ifdef SQLITE_SHARED_MAPPING
        if( pFile->pInode==0 )
#endif
        if( pFile->mmapSize>0 ){
          unixUnmapfile(pFile);
          rc = unixMapfile(pFile, -1);
        }
      }
      return rc;
    }

#if SQLITE_MAX_MMAP_SIZE>0
/*
** If it is currently memory mapped, unmap file pFd.
*/
static void unixUnmapfile(unixFile *pFd){
  assert( pFd->nFetchOut==0 );
#ifdef SQLITE_SHARED_MAPPING
  if( pFd->pInode ) return;
#endif
  if( pFd->pMapRegion ){
    osMunmap(pFd->pMapRegion, pFd->mmapSizeActual);
    pFd->pMapRegion = 0;
    pFd->mmapSize = 0;
    pFd->mmapSizeActual = 0;
  }
}

      return SQLITE_IOERR_FSTAT;
    }
    nMap = statbuf.st_size;
  }
  if( nMap>pFd->mmapSizeMax ){
    nMap = pFd->mmapSizeMax;
  }

#ifdef SQLITE_SHARED_MAPPING
  if( pFd->pInode ){
    unixInodeInfo *pInode = pFd->pInode;
    if( pFd->pMapRegion ) return SQLITE_OK;
    unixEnterMutex();
    if( pInode->pSharedMapping==0 ){
      u8 *pNew = osMmap(0, nMap, PROT_READ, MAP_SHARED, pFd->h, 0);
      if( pNew==MAP_FAILED ){
        unixLogError(SQLITE_OK, "mmap", pFd->zPath);
        pFd->mmapSizeMax = 0;
      }else{
        pInode->pSharedMapping = pNew;
        pInode->nSharedMapping = nMap;
      }
    }
    pFd->pMapRegion = pInode->pSharedMapping;
    pFd->mmapSizeActual = pFd->mmapSize = pInode->nSharedMapping;
    unixLeaveMutex();
    return SQLITE_OK;
  }
#endif

  assert( nMap>0 || (pFd->mmapSize==0 && pFd->pMapRegion==0) );
  if( nMap!=pFd->mmapSize ){
    unixRemapfile(pFd, nMap);
  }

  return SQLITE_OK;

#endif
  }

  if( pLockingStyle == &posixIoMethods
#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
    || pLockingStyle == &nfsIoMethods
#endif
#ifdef SQLITE_SHARED_MAPPING
    || pLockingStyle == &nolockIoMethods
#endif
  ){
    unixEnterMutex();
    rc = findInodeInfo(pNew, &pNew->pInode);
    if( rc!=SQLITE_OK ){
      /* If an error occurred in findInodeInfo(), close the file descriptor
      ** immediately, before releasing the mutex. findInodeInfo() may fail
      ** in two scenarios:

  Pgno dbFileSize;            /* Number of pages in the database file */
  Pgno dbHintSize;            /* Value passed to FCNTL_SIZE_HINT call */
  int errCode;                /* One of several kinds of errors */
  int nRec;                   /* Pages journalled since last j-header written */
  u32 cksumInit;              /* Quasi-random value added to every checksum */
  u32 nSubRec;                /* Number of records written to sub-journal */
  Bitvec *pInJournal;         /* One bit for each page in the database file */
#ifndef SQLITE_OMIT_CONCURRENT
  Bitvec *pAllRead;           /* Pages read within current CONCURRENT trans. */
#endif
  sqlite3_file *fd;           /* File descriptor for database */
  sqlite3_file *jfd;          /* File descriptor for main journal */
  sqlite3_file *sjfd;         /* File descriptor for sub-journal */
  i64 journalOff;             /* Current write offset in the journal file */
  i64 journalHdr;             /* Byte offset to previous journal header */
  sqlite3_backup *pBackup;    /* Pointer to list of ongoing backup processes */
  PagerSavepoint *aSavepoint; /* Array of active savepoints */

    case PAGER_WRITER_LOCKED:
      assert( p->eLock!=UNKNOWN_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      if( !pagerUseWal(pPager) ){
        assert( p->eLock>=RESERVED_LOCK );
      }
#ifndef SQLITE_OMIT_CONCURRENT
      assert( pPager->dbSize==pPager->dbOrigSize );
      assert( pPager->dbSize==pPager->dbOrigSize || pPager->pAllRead );
#endif
      assert( pPager->dbOrigSize==pPager->dbFileSize );
      assert( pPager->dbOrigSize==pPager->dbHintSize );
      assert( pPager->setSuper==0 );
      break;

    case PAGER_WRITER_CACHEMOD:
      assert( p->eLock!=UNKNOWN_LOCK );

      rc |= sqlite3BitvecSet(p->pInSavepoint, pgno);
      testcase( rc==SQLITE_NOMEM );
      assert( rc==SQLITE_OK || rc==SQLITE_NOMEM );
    }
  }
  return rc;
}

#ifndef SQLITE_OMIT_CONCURRENT
/*
** If they are not already, begin recording all pages read from the pager layer
** by the b-tree layer This is used by concurrent transactions. Return
** SQLITE_OK if successful, or an SQLite error code (SQLITE_NOMEM) if an error
** occurs.
*/
int sqlite3PagerBeginConcurrent(Pager *pPager){
  int rc = SQLITE_OK;
  if( pPager->pAllRead==0 ){
    pPager->pAllRead = sqlite3BitvecCreate(pPager->dbSize);
    pPager->dbOrigSize = pPager->dbSize;
    if( pPager->pAllRead==0 ){
      rc = SQLITE_NOMEM;
    }
  }
  return rc;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** Stop recording all pages read from the pager layer by the b-tree layer
** and discard any current records.
*/
void sqlite3PagerEndConcurrent(Pager *pPager){
  sqlite3BitvecDestroy(pPager->pAllRead);
  pPager->pAllRead = 0;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** Return true if the database is in wal mode. False otherwise.
*/
int sqlite3PagerIsWal(Pager *pPager){
  return pPager->pWal!=0;
}
#endif /* SQLITE_OMIT_CONCURRENT */

/*
** Free the Pager.pInJournal and Pager.pAllRead bitvec objects.
*/
static void pagerFreeBitvecs(Pager *pPager){
  sqlite3BitvecDestroy(pPager->pInJournal);
  pPager->pInJournal = 0;
  sqlite3PagerEndConcurrent(pPager);
}

/*
** This function is a no-op if the pager is in exclusive mode and not
** in the ERROR state. Otherwise, it switches the pager to PAGER_OPEN
** state.
**
** If the pager is not in exclusive-access mode, the database file is

static void pager_unlock(Pager *pPager){

  assert( pPager->eState==PAGER_READER
       || pPager->eState==PAGER_OPEN
       || pPager->eState==PAGER_ERROR
  );

  sqlite3BitvecDestroy(pPager->pInJournal);
  pPager->pInJournal = 0;
  pagerFreeBitvecs(pPager);
  releaseAllSavepoints(pPager);

  if( pagerUseWal(pPager) ){
    assert( !isOpen(pPager->jfd) );
    if( pPager->eState==PAGER_ERROR ){
      /* If an IO error occurs in wal.c while attempting to wrap the wal file,
      ** then the Wal object may be holding a write-lock but no read-lock.

    if( p ){
      p->pageHash = 0;
      sqlite3PagerUnrefNotNull(p);
    }
  }
#endif

  sqlite3BitvecDestroy(pPager->pInJournal);
  pPager->pInJournal = 0;
  pagerFreeBitvecs(pPager);
  pPager->nRec = 0;
  if( rc==SQLITE_OK ){
    if( MEMDB || pagerFlushOnCommit(pPager, bCommit) ){
      sqlite3PcacheCleanAll(pPager->pPCache);
    }else{
      sqlite3PcacheClearWritable(pPager->pPCache);
    }

  ** been written (but not committed) to the log file, do one of the
  ** following:
  **
  **   + Discard the cached page (if refcount==0), or
  **   + Reload page content from the database (if refcount>0).
  */
  pPager->dbSize = pPager->dbOrigSize;
  rc = sqlite3WalUndo(pPager->pWal, pagerUndoCallback, (void *)pPager);
  rc = sqlite3WalUndo(pPager->pWal, pagerUndoCallback, (void *)pPager, 
#ifdef SQLITE_OMIT_CONCURRENT
      0
#else
      pPager->pAllRead!=0
#endif
  );
  pList = sqlite3PcacheDirtyList(pPager->pPCache);

#ifndef SQLITE_OMIT_CONCURRENT
  /* If this is an CONCURRENT transaction, then page 1 must be reread from 
  ** the db file, even if it is not dirty. This is because the b-tree layer 
  ** may have already zeroed the nFree and iTrunk header fields.  */
  if( rc==SQLITE_OK && (pList==0 || pList->pgno!=1) && pPager->pAllRead ){
    rc = pagerUndoCallback((void*)pPager, 1);
  }
#endif

  while( pList && rc==SQLITE_OK ){
    PgHdr *pNext = pList->pDirty;
    rc = pagerUndoCallback((void *)pPager, pList->pgno);
    pList = pNext;
  }

  return rc;

    ** list here. */
    PgHdr **ppNext = &pList;
    nList = 0;
    for(p=pList; (*ppNext = p)!=0; p=p->pDirty){
      if( p->pgno<=nTruncate ){
        ppNext = &p->pDirty;
        nList++;
        PAGERTRACE(("TO-WAL %d page %d hash(%08x)\n",
                     PAGERID(pPager), p->pgno, pager_pagehash(p)));
      }
    }
    assert( pList );
  }else{
    nList = 1;
  }
  pPager->aStat[PAGER_STAT_WRITE] += nList;

  assert( pPager->eState==PAGER_WRITER_CACHEMOD
       || pPager->eState==PAGER_WRITER_DBMOD
  );
  assert( assert_pager_state(pPager) );
  assert( !pagerUseWal(pPager) );

  rc = sqlite3PagerExclusiveLock(pPager);
  rc = sqlite3PagerExclusiveLock(pPager, 0, 0);
  if( rc!=SQLITE_OK ) return rc;

  if( !pPager->noSync ){
    assert( !pPager->tempFile );
    if( isOpen(pPager->jfd) && pPager->journalMode!=PAGER_JOURNALMODE_MEMORY ){
      const int iDc = sqlite3OsDeviceCharacteristics(pPager->fd);
      assert( isOpen(pPager->jfd) );

  ){
    return SQLITE_OK;
  }

  pPager->aStat[PAGER_STAT_SPILL]++;
  pPg->pDirty = 0;
  if( pagerUseWal(pPager) ){
#ifndef SQLITE_OMIT_CONCURRENT
    /* If the transaction is a "BEGIN CONCURRENT" transaction, the page 
    ** cannot be flushed to disk. Return early in this case. */
    if( pPager->pAllRead ) return SQLITE_OK;
#endif

    /* Write a single frame for this page to the log. */
    rc = subjournalPageIfRequired(pPg);
    if( rc==SQLITE_OK ){
      rc = pagerWalFrames(pPager, pPg, 0, 0);
    }
  }else{
   

static void pagerUnlockIfUnused(Pager *pPager){
  if( sqlite3PcacheRefCount(pPager->pPCache)==0 ){
    assert( pPager->nMmapOut==0 ); /* because page1 is never memory mapped */
    pagerUnlockAndRollback(pPager);
  }
}

#ifndef SQLITE_OMIT_CONCURRENT
/*
** If this pager is currently in a concurrent transaction (pAllRead!=0),
** then set the bit in the pAllRead vector to indicate that the transaction
** read from page pgno. Return SQLITE_OK if successful, or an SQLite error
** code (i.e. SQLITE_NOMEM) if an error occurs.
*/
int sqlite3PagerUsePage(Pager *pPager, Pgno pgno){
  int rc = SQLITE_OK;
  if( pPager->pAllRead && pgno<=pPager->dbOrigSize ){
    PAGERTRACE(("USING page %d\n", pgno));
    rc = sqlite3BitvecSet(pPager->pAllRead, pgno);
  }
  return rc;
}
#endif

/*
** The page getter methods each try to acquire a reference to a
** page with page number pgno. If the requested reference is
** successfully obtained, it is copied to *ppPage and SQLITE_OK returned.
**
** There are different implementations of the getter method depending
** on the current state of the pager.

  u8 noContent;                   /* True if PAGER_GET_NOCONTENT is set */
  sqlite3_pcache_page *pBase;

  assert( pPager->errCode==SQLITE_OK );
  assert( pPager->eState>=PAGER_READER );
  assert( assert_pager_state(pPager) );
  assert( pPager->hasHeldSharedLock==1 );

  /* If this is an CONCURRENT transaction and the page being read was
  ** present in the database file when the transaction was opened,
  ** mark it as read in the pAllRead vector.  */
  if( (rc = sqlite3PagerUsePage(pPager, pgno))!=SQLITE_OK ){
    pPg = 0;
    goto pager_acquire_err;
  }

  if( pgno==0 ) return SQLITE_CORRUPT_BKPT;
  pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3);
  if( pBase==0 ){
    pPg = 0;
    rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase);
    if( rc!=SQLITE_OK ) goto pager_acquire_err;

  return rc;
}

/*
** Begin a write-transaction on the specified pager object. If a
** write-transaction has already been opened, this function is a no-op.
**
** If the exFlag argument is false, then acquire at least a RESERVED
** lock on the database file. If exFlag is true, then acquire at least
** If the exFlag argument is 0, then acquire at least a RESERVED
** lock on the database file. If exFlag is >0, then acquire at least
** an EXCLUSIVE lock. If such a lock is already held, no locking
** functions need be called.
**
** If (exFlag<0) and the database is in WAL mode, do not take any locks.
** The transaction will run in CONCURRENT mode instead.
**
** If the subjInMemory argument is non-zero, then any sub-journal opened
** within this transaction will be opened as an in-memory file. This
** has no effect if the sub-journal is already opened (as it may be when
** running in exclusive mode) or if the transaction does not require a
** sub-journal. If the subjInMemory argument is zero, then any required
** sub-journal is implemented in-memory if pPager is an in-memory database,
** or using a temporary file otherwise.
*/
int sqlite3PagerBegin(Pager *pPager, int exFlag, int subjInMemory){
  int rc = SQLITE_OK;

  if( pPager->errCode ) return pPager->errCode;
  assert( pPager->eState>=PAGER_READER && pPager->eState<PAGER_ERROR );
  pPager->subjInMemory = (u8)subjInMemory;

  if( pPager->eState==PAGER_READER ){
    assert( pPager->pInJournal==0 );

    if( pagerUseWal(pPager) ){
      /* If the pager is configured to use locking_mode=exclusive, and an
      ** exclusive lock on the database is not already held, obtain it now.
      */
      if( pPager->exclusiveMode && sqlite3WalExclusiveMode(pPager->pWal, -1) ){
        rc = pagerLockDb(pPager, EXCLUSIVE_LOCK);
        if( rc!=SQLITE_OK ){
          return rc;
        }
        (void)sqlite3WalExclusiveMode(pPager->pWal, 1);
      }

      /* Grab the write lock on the log file. If successful, upgrade to
      ** PAGER_RESERVED state. Otherwise, return an error code to the caller.
      ** The busy-handler is not invoked if another connection already
      ** holds the write-lock. If possible, the upper layer will call it.
      ** holds the write-lock. If possible, the upper layer will call it.  */
      */
      rc = sqlite3WalBeginWriteTransaction(pPager->pWal);
      if( exFlag>=0 ){
        rc = sqlite3WalBeginWriteTransaction(pPager->pWal);
      }
    }else{
      /* Obtain a RESERVED lock on the database file. If the exFlag parameter
      ** is true, then immediately upgrade this to an EXCLUSIVE lock. The
      ** busy-handler callback can be used when upgrading to the EXCLUSIVE
      ** lock, but not when obtaining the RESERVED lock.
      */
      rc = pagerLockDb(pPager, RESERVED_LOCK);
      if( rc==SQLITE_OK && exFlag ){
      if( rc==SQLITE_OK && exFlag>0 ){
        rc = pager_wait_on_lock(pPager, EXCLUSIVE_LOCK);
      }
    }

    if( rc==SQLITE_OK ){
      /* Change to WRITER_LOCKED state.
      **

}

/*
** Return TRUE if the page given in the argument was previously passed
** to sqlite3PagerWrite().  In other words, return TRUE if it is ok
** to change the content of the page.
*/
#ifndef NDEBUG
#if !defined(SQLITE_OMIT_CONCURRENT) || !defined(NDEBUG)
int sqlite3PagerIswriteable(DbPage *pPg){
  return pPg->flags & PGHDR_WRITEABLE;
}
#endif

/*
** A call to this routine tells the pager that it is not necessary to

    assert( !MEMDB );
    rc = sqlite3OsSync(pPager->fd, pPager->syncFlags);
  }
  return rc;
}

/*
** This function may only be called while a write-transaction is active in
** rollback. If the connection is in WAL mode, this call is a no-op.
** Otherwise, if the connection does not already have an EXCLUSIVE lock on
** the database file, an attempt is made to obtain one.
** This function is called to ensure that all locks required to commit the
** current write-transaction to the database file are held. If the db is
** in rollback mode, this means the EXCLUSIVE lock on the database file.
**
** Or, if this is a non-CONCURRENT transaction on a wal-mode database, this
** function is a no-op.
**
** If this is an CONCURRENT transaction on a wal-mode database, this function
** attempts to obtain the WRITER lock on the wal file and also checks to
** see that the transaction can be safely committed (does not commit with 
** any other transaction committed since it was opened).
**
** If the EXCLUSIVE lock is already held or the attempt to obtain it is
** successful, or the connection is in WAL mode, SQLITE_OK is returned.
** Otherwise, either SQLITE_BUSY or an SQLITE_IOERR_XXX error code is
** returned.
** If the required locks are already held or successfully obtained and
** the transaction can be committed, SQLITE_OK is returned. If a required lock
** cannot be obtained, SQLITE_BUSY is returned. Or, if the current transaction
** is CONCURRENT and cannot be committed due to a conflict, SQLITE_BUSY_SNAPSHOT
** is returned. Otherwise, if some other error occurs (IO error, OOM etc.),
** and SQLite error code is returned.
*/
int sqlite3PagerExclusiveLock(Pager *pPager){
int sqlite3PagerExclusiveLock(Pager *pPager, PgHdr *pPage1, Pgno *piConflict){
  int rc = pPager->errCode;
  assert( assert_pager_state(pPager) );
  if( rc==SQLITE_OK ){
    assert( pPager->eState==PAGER_WRITER_CACHEMOD
         || pPager->eState==PAGER_WRITER_DBMOD
         || pPager->eState==PAGER_WRITER_LOCKED
    );
    assert( assert_pager_state(pPager) );
    if( 0==pagerUseWal(pPager) ){
      rc = pager_wait_on_lock(pPager, EXCLUSIVE_LOCK);
    }
#ifndef SQLITE_OMIT_CONCURRENT
    else{
      if( pPager->pAllRead ){
        /* This is an CONCURRENT transaction. Attempt to lock the wal database
        ** here. If SQLITE_BUSY (but not SQLITE_BUSY_SNAPSHOT) is returned,
        ** invoke the busy-handler and try again for as long as it returns
        ** non-zero.  */
        do {
          rc = sqlite3WalLockForCommit(
              pPager->pWal, pPage1, pPager->pAllRead, piConflict
          );
        }while( rc==SQLITE_BUSY 
             && pPager->xBusyHandler(pPager->pBusyHandlerArg) 
        );
  }
      }
    }
#endif /* SQLITE_OMIT_CONCURRENT */
  }
  return rc;
}

#ifndef SQLITE_OMIT_CONCURRENT
/*
** This function is called as part of committing an CONCURRENT transaction.
** At this point the wal WRITER lock is held, and all pages in the cache 
** except for page 1 are compatible with the snapshot at the head of the
** wal file. 
**
** This function updates the in-memory data structures and reloads the
** contents of page 1 so that the client is operating on the snapshot 
** at the head of the wal file.
**
** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
*/
int sqlite3PagerUpgradeSnapshot(Pager *pPager, DbPage *pPage1){
  int rc;

  assert( pPager->pWal && pPager->pAllRead );
  rc = sqlite3WalUpgradeSnapshot(pPager->pWal);
  if( rc==SQLITE_OK ){
    rc = readDbPage(pPage1);
  }

  return rc;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** Set the in-memory cache of the database file size to nSz pages.
*/
void sqlite3PagerSetDbsize(Pager *pPager, Pgno nSz){
  pPager->dbSize = nSz;
}

/* !defined(SQLITE_OMIT_CONCURRENT)
**
** If this is a WAL mode connection and the WRITER lock is currently held,
** relinquish it.
*/
void sqlite3PagerDropExclusiveLock(Pager *pPager){
  if( pagerUseWal(pPager) ){
    sqlite3WalEndWriteTransaction(pPager->pWal);
  }
}
#endif  /* SQLITE_OMIT_CONCURRENT */


/*
** Sync the database file for the pager pPager. zSuper points to the name
** of a super-journal file that should be written into the individual
** journal file. zSuper may be NULL, which is interpreted as no
** super-journal (a single database transaction).
**

*/
void sqlite3PagerSnapshotUnlock(Pager *pPager){
  assert( pPager->pWal );
  sqlite3WalSnapshotUnlock(pPager->pWal);
}

#endif /* SQLITE_ENABLE_SNAPSHOT */

int sqlite3PagerWalInfo(Pager *pPager, u32 *pnPrior, u32 *pnFrame){
  return sqlite3WalInfo(pPager->pWal, pnPrior, pnFrame);
}

#endif /* !SQLITE_OMIT_WAL */

#ifdef SQLITE_ENABLE_ZIPVFS
/*
** A read-lock must be held on the pager when this function is called. If
** the pager is in WAL mode and the WAL file currently contains one or more
** frames, return the size in bytes of the page images stored within the

void *sqlite3PagerGetData(DbPage *); 
void *sqlite3PagerGetExtra(DbPage *); 

/* Functions used to manage pager transactions and savepoints. */
void sqlite3PagerPagecount(Pager*, int*);
int sqlite3PagerBegin(Pager*, int exFlag, int);
int sqlite3PagerCommitPhaseOne(Pager*,const char *zSuper, int);
int sqlite3PagerExclusiveLock(Pager*);
int sqlite3PagerExclusiveLock(Pager*, DbPage *pPage1, Pgno*);
int sqlite3PagerSync(Pager *pPager, const char *zSuper);
int sqlite3PagerCommitPhaseTwo(Pager*);
int sqlite3PagerRollback(Pager*);
int sqlite3PagerOpenSavepoint(Pager *pPager, int n);
int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint);
int sqlite3PagerSharedLock(Pager *pPager);

int sqlite3SectorSize(sqlite3_file *);

/* Functions used to truncate the database file. */
void sqlite3PagerTruncateImage(Pager*,Pgno);

void sqlite3PagerRekey(DbPage*, Pgno, u16);

#ifndef SQLITE_OMIT_CONCURRENT
int sqlite3PagerUsePage(Pager*, Pgno);
void sqlite3PagerEndConcurrent(Pager*);
int sqlite3PagerBeginConcurrent(Pager*);
void sqlite3PagerDropExclusiveLock(Pager*);
int sqlite3PagerUpgradeSnapshot(Pager *pPager, DbPage*);
void sqlite3PagerSetDbsize(Pager *pPager, Pgno);
int sqlite3PagerIsWal(Pager*);
#else
# define sqlite3PagerEndConcurrent(x)
# define sqlite3PagerUsePage(x, y) SQLITE_OK
#endif

#if defined(SQLITE_DEBUG) || !defined(SQLITE_OMIT_CONCURRENT)
int sqlite3PagerIswriteable(DbPage*);
#endif

int sqlite3PagerWalInfo(Pager*, u32 *pnPrior, u32 *pnFrame);

/* Functions to support testing and debugging. */
#if !defined(NDEBUG) || defined(SQLITE_TEST)
  Pgno sqlite3PagerPagenumber(DbPage*);
  int sqlite3PagerIswriteable(DbPage*);
#endif
#ifdef SQLITE_TEST
  int *sqlite3PagerStats(Pager*);
  void sqlite3PagerRefdump(Pager*);
  void disable_simulated_io_errors(void);
  void enable_simulated_io_errors(void);
#else

trans_opt ::= .
trans_opt ::= TRANSACTION.
trans_opt ::= TRANSACTION nm.
%type transtype {int}
transtype(A) ::= .             {A = TK_DEFERRED;}
transtype(A) ::= DEFERRED(X).  {A = @X; /*A-overwrites-X*/}
transtype(A) ::= IMMEDIATE(X). {A = @X; /*A-overwrites-X*/}
transtype(A) ::= EXCLUSIVE(X). {A = @X; /*A-overwrites-X*/}
transtype(A) ::= ID(X). {
   Token *p = &X;
   if( p->n==9 && sqlite3_strnicmp(p->z,"exclusive",9)==0 ){
     A = TK_EXCLUSIVE;
   }else if( p->n==10 && sqlite3_strnicmp(p->z,"concurrent",10)==0 ){
     A = TK_CONCURRENT;  /*A-overwrites-X*/
   }else{
     parserSyntaxError(pParse, p);
   }
}
cmd ::= COMMIT|END(X) trans_opt.   {sqlite3EndTransaction(pParse,@X);}
cmd ::= ROLLBACK(X) trans_opt.     {sqlite3EndTransaction(pParse,@X);}

savepoint_opt ::= SAVEPOINT.
savepoint_opt ::= .
cmd ::= SAVEPOINT nm(X). {
  sqlite3Savepoint(pParse, SAVEPOINT_BEGIN, &X);

%right BITNOT.
%nonassoc ON.

// An IDENTIFIER can be a generic identifier, or one of several
// keywords.  Any non-standard keyword can also be an identifier.
//
%token_class id  ID|INDEXED.

// And "ids" is an identifier-or-string.
//
%token_class ids  ID|STRING.

// An identifier or a join-keyword
//
%token_class idj  ID|INDEXED|JOIN_KW.

  TRUEFALSE       /* True or false keyword */
  ISNOT           /* Combination of IS and NOT */
  FUNCTION        /* A function invocation */
  UPLUS           /* Unary plus */
  UMINUS          /* Unary minus */
  TRUTH           /* IS TRUE or IS FALSE or IS NOT TRUE or IS NOT FALSE */
  REGISTER        /* Reference to a VDBE register */
  CONCURRENT      /* BEGIN CONCURRENT */
  VECTOR          /* Vector */
  SELECT_COLUMN   /* Choose a single column from a multi-column SELECT */
  IF_NULL_ROW     /* the if-null-row operator */
  ASTERISK        /* The "*" in count(*) and similar */
  SPAN            /* The span operator */
  ERROR           /* An expression containing an error */
.

    }
    wsdPrng.s[12]++;
    chacha_block((u32*)wsdPrng.out, wsdPrng.s);
    wsdPrng.n = 64;
  }
  sqlite3_mutex_leave(mutex);
}

/*
** Initialize a fast PRNG.  A Fast PRNG is called "fast" because it does
** not need a mutex to operate, though it does use a mutex to initialize.
** The quality of the randomness is not as good as the global PRNG.
*/
void sqlite3FastPrngInit(FastPrng *pPrng){
  sqlite3_randomness(sizeof(*pPrng), pPrng);
  pPrng->x |= 1;
}

/*
** Generate N bytes of pseudo-randomness using a FastPrng
*/
void sqlite3FastRandomness(FastPrng *pPrng, int N, void *P){
  unsigned char *pOut = (unsigned char*)P;
  while( N-->0 ){
    /* "x" is a variant of LFSR called "Xorshift" by George Marsaglia */
    pPrng->x ^= pPrng->x <<13;
    pPrng->x ^= pPrng->x >>7;
    pPrng->x ^= pPrng->x <<17;
    /* "y" is a LCG using Don Kunth's constants from MMIX */
    pPrng->y = (pPrng->y)*6364136223846793005LL + 1442695040888963407LL;
    /* XOR the two streams together to give the final result */
    *(pOut++) = (pPrng->x ^ pPrng->y) & 0xff;
  }
}

#ifndef SQLITE_UNTESTABLE
/*
** For testing purposes, we sometimes want to preserve the state of
** PRNG and restore the PRNG to its saved state at a later time, or
** to reset the PRNG to its initial state.  These routines accomplish
** those tasks.

      if( nName>0 ){
        for(j=nName-1; j>0 && sqlite3Isdigit(zName[j]); j--){}
        if( zName[j]==':' ) nName = j;
      }
      zName = sqlite3MPrintf(db, "%.*z:%u", nName, zName, ++cnt);
      sqlite3ProgressCheck(pParse);
      if( cnt>3 ){
        sqlite3_randomness(sizeof(cnt), &cnt);
        sqlite3FastRandomness(&db->sPrng, sizeof(cnt), &cnt);
      }
    }
    pCol->zCnName = zName;
    pCol->hName = sqlite3StrIHash(zName);
    if( pX->fg.bNoExpand ){
      pCol->colFlags |= COLFLAG_NOEXPAND;
    }

**
** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
**
** This interface is only available if SQLite is compiled with the
** [SQLITE_ENABLE_SNAPSHOT] option.
*/
SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);

/*
** CAPI3REF: Wal related information regarding the most recent COMMIT
** EXPERIMENTAL
**
** This function reports on the state of the wal file (if any) for database 
** zDb, which should be "main", "temp", or the name of the attached database.
** Its results - the values written to the output parameters - are only
** defined if the most recent SQL command on the connection was a successful 
** COMMIT that wrote data to wal-mode database zDb.
**
** Assuming the above conditions are met, output parameter (*pnFrame) is set
** to the total number of frames in the wal file. Parameter (*pnPrior) is
** set to the number of frames that were present in the wal file before the
** most recent transaction was committed. So that the number of frames written
** by the most recent transaction is (*pnFrame)-(*pnPrior).
**
** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code. It
** is not an error if this function is called at a time when the results
** are undefined.
*/
SQLITE_EXPERIMENTAL int sqlite3_wal_info(
  sqlite3 *db, const char *zDb, 
  unsigned int *pnPrior, unsigned int *pnFrame
);

/*
** CAPI3REF: Serialize a database
**
** The sqlite3_serialize(D,S,P,F) interface returns a pointer to
** memory that is a serialization of the S database on
** [database connection] D.  If S is a NULL pointer, the main database is used.

typedef struct CteUse CteUse;
typedef struct Db Db;
typedef struct DbClientData DbClientData;
typedef struct DbFixer DbFixer;
typedef struct Schema Schema;
typedef struct Expr Expr;
typedef struct ExprList ExprList;
typedef struct FastPrng FastPrng;
typedef struct FKey FKey;
typedef struct FpDecode FpDecode;
typedef struct FuncDestructor FuncDestructor;
typedef struct FuncDef FuncDef;
typedef struct FuncDefHash FuncDefHash;
typedef struct IdList IdList;
typedef struct Index Index;

*/
#ifndef SQLITE_DEFAULT_SYNCHRONOUS
# define SQLITE_DEFAULT_SYNCHRONOUS 2
#endif
#ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS
# define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS
#endif

/*
** State of a simple PRNG used for the per-connection and per-pager
** pseudo-random number generators.
*/
struct FastPrng {
  sqlite3_uint64 x, y;
};

/*
** Each database file to be accessed by the system is an instance
** of the following structure.  There are normally two of these structures
** in the sqlite.aDb[] array.  aDb[0] is the main database file and
** aDb[1] is the database file used to hold temporary tables.  Additional
** databases may be attached.

  int errCode;                  /* Most recent error code (SQLITE_*) */
  int errByteOffset;            /* Byte offset of error in SQL statement */
  int errMask;                  /* & result codes with this before returning */
  int iSysErrno;                /* Errno value from last system error */
  u32 dbOptFlags;               /* Flags to enable/disable optimizations */
  u8 enc;                       /* Text encoding */
  u8 autoCommit;                /* The auto-commit flag. */
  u8 eConcurrent;               /* CONCURRENT_* value */
  u8 temp_store;                /* 1: file 2: memory 0: default */
  u8 mallocFailed;              /* True if we have seen a malloc failure */
  u8 bBenignMalloc;             /* Do not require OOMs if true */
  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
  u8 suppressErr;               /* Do not issue error messages if true */
  u8 vtabOnConflict;            /* Value to return for s3_vtab_on_conflict() */
  u8 isTransactionSavepoint;    /* True if the outermost savepoint is a TS */
  u8 mTrace;                    /* zero or more SQLITE_TRACE flags */
  u8 noSharedCache;             /* True if no shared-cache backends */
  u8 nSqlExec;                  /* Number of pending OP_SqlExec opcodes */
  u8 eOpenState;                /* Current condition of the connection */
  int nextPagesize;             /* Pagesize after VACUUM if >0 */
  FastPrng sPrng;               /* State of the per-connection PRNG */
  i64 nChange;                  /* Value returned by sqlite3_changes() */
  i64 nTotalChange;             /* Value returned by sqlite3_total_changes() */
  int aLimit[SQLITE_N_LIMIT];   /* Limits */
  int nMaxSorterMmap;           /* Maximum size of regions mapped by sorter */
  struct sqlite3InitInfo {      /* Information used during initialization */
    Pgno newTnum;               /* Rootpage of table being initialized */
    u8 iDb;                     /* Which db file is being initialized */

  sqlite3 *pUnlockConnection;           /* Connection to watch for unlock */
  void *pUnlockArg;                     /* Argument to xUnlockNotify */
  void (*xUnlockNotify)(void **, int);  /* Unlock notify callback */
  sqlite3 *pNextBlocked;        /* Next in list of all blocked connections */
#endif
};

/*
** Candidate values for sqlite3.eConcurrent
*/
#define CONCURRENT_NONE   0
#define CONCURRENT_OPEN   1
#define CONCURRENT_SCHEMA 2

/*
** A macro to discover the encoding of a database.
*/
#define SCHEMA_ENC(db) ((db)->aDb[0].pSchema->enc)
#define ENC(db)        ((db)->enc)

/*

#define SQLITE_CorruptRdOnly  HI(0x00002) /* Prohibit writes due to error */
#define SQLITE_ReadUncommit   HI(0x00004) /* READ UNCOMMITTED in shared-cache */
#define SQLITE_FkNoAction     HI(0x00008) /* Treat all FK as NO ACTION */
#define SQLITE_AttachCreate   HI(0x00010) /* ATTACH allowed to create new dbs */
#define SQLITE_AttachWrite    HI(0x00020) /* ATTACH allowed to open for write */
#define SQLITE_Comments       HI(0x00040) /* Enable SQL comments */

/* Flags used by the Pragma noop_update enhancement */
#define SQLITE_NoopUpdate     HI(0x0001000) /* UPDATE operations are no-ops */

/* Flags used only if debugging */
#ifdef SQLITE_DEBUG
#define SQLITE_SqlTrace       HI(0x0100000) /* Debug print SQL as it executes */
#define SQLITE_VdbeListing    HI(0x0200000) /* Debug listings of VDBE progs */
#define SQLITE_VdbeTrace      HI(0x0400000) /* True to trace VDBE execution */
#define SQLITE_VdbeAddopTrace HI(0x0800000) /* Trace sqlite3VdbeAddOp() calls */
#define SQLITE_VdbeEQP        HI(0x1000000) /* Debug EXPLAIN QUERY PLAN */

int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx);
int sqlite3ReferencesSrcList(Parse*, Expr*, SrcList*);
Vdbe *sqlite3GetVdbe(Parse*);
#ifndef SQLITE_UNTESTABLE
void sqlite3PrngSaveState(void);
void sqlite3PrngRestoreState(void);
#endif
void sqlite3FastPrngInit(FastPrng*);
void sqlite3FastRandomness(FastPrng*, int N, void *P);
void sqlite3RollbackAll(sqlite3*,int);
void sqlite3CodeVerifySchema(Parse*, int);
void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
void sqlite3BeginTransaction(Parse*, int);
void sqlite3EndTransaction(Parse*,int);
void sqlite3Savepoint(Parse*, int, Token*);
void sqlite3CloseSavepoints(sqlite3 *);

  }else{
    if( getDbPointer(interp, Tcl_GetString(objv[1]), &db) ) return TCL_ERROR;
    rc = sqlite3_db_config(db, SQLITE_DBCONFIG_MAINDBNAME, "icecube");
    Tcl_SetObjResult(interp, Tcl_NewIntObj(rc));
    return TCL_OK;
  }
}

/*
** Usage: sqlite3_wal_info DB DBNAME
*/
static int SQLITE_TCLAPI test_wal_info(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  int rc;
  sqlite3 *db;
  char *zName;
  unsigned int nPrior;
  unsigned int nFrame;

  if( objc!=3 ){
    Tcl_WrongNumArgs(interp, 1, objv, "DB DBNAME");
    return TCL_ERROR;
  }
  if( getDbPointer(interp, Tcl_GetString(objv[1]), &db) ) return TCL_ERROR;
  zName = Tcl_GetString(objv[2]);

  rc = sqlite3_wal_info(db, zName, &nPrior, &nFrame);
  if( rc!=SQLITE_OK ){
    Tcl_SetObjResult(interp, Tcl_NewStringObj(sqlite3ErrName(rc), -1));
    return TCL_ERROR;
  }else{
    Tcl_Obj *pNew = Tcl_NewObj();
    Tcl_ListObjAppendElement(interp, pNew, Tcl_NewWideIntObj((i64)nPrior));
    Tcl_ListObjAppendElement(interp, pNew, Tcl_NewWideIntObj((i64)nFrame));
    Tcl_SetObjResult(interp, pNew);
  }
  return TCL_OK;
}

/*
** Usage: sqlite3_mmap_warm DB DBNAME
*/
static int SQLITE_TCLAPI test_mmap_warm(
  void * clientData,
  Tcl_Interp *interp,

     { "sqlite3_snapshot_cmp", test_snapshot_cmp, 0 },
     { "sqlite3_snapshot_recover", test_snapshot_recover, 0 },
     { "sqlite3_snapshot_get_blob", test_snapshot_get_blob, 0 },
     { "sqlite3_snapshot_open_blob", test_snapshot_open_blob, 0 },
     { "sqlite3_snapshot_cmp_blob", test_snapshot_cmp_blob, 0 },
#endif
     { "sqlite3_delete_database", test_delete_database,    0 },
     { "sqlite3_wal_info",        test_wal_info,           0 },
     { "atomic_batch_write",      test_atomic_batch_write, 0 },
     { "sqlite3_mmap_warm",       test_mmap_warm,          0 },
     { "sqlite3_config_sorterref", test_config_sorterref,   0 },
     { "sqlite3_autovacuum_pages", test_autovacuum_pages,   0 },
     { "decode_hexdb",             test_decode_hexdb,       0 },
     { "test_write_db",            test_write_db,           0 },
     { "sqlite3_register_cksumvfs", test_register_cksumvfs,  0 },

#endif

#ifdef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
  Tcl_SetVar2(interp, "sqlite_options", "truncate_opt", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "truncate_opt", "1", TCL_GLOBAL_ONLY);
#endif

#ifndef SQLITE_OMIT_CONCURRENT
  Tcl_SetVar2(interp, "sqlite_options", "concurrent", "1", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "concurrent", "0", TCL_GLOBAL_ONLY);
#endif

#ifdef SQLITE_OMIT_UTF16
  Tcl_SetVar2(interp, "sqlite_options", "utf16", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "utf16", "1", TCL_GLOBAL_ONLY);
#endif

  ** of the UPDATE statement.  Also find the column index
  ** for each column to be updated in the pChanges array.  For each
  ** column to be updated, make sure we have authorization to change
  ** that column.
  */
  chngRowid = chngPk = 0;
  for(i=0; i<pChanges->nExpr; i++){
#if defined(SQLITE_ENABLE_NOOP_UPDATE) && !defined(SQLITE_OMIT_FLAG_PRAGMAS)
    if( db->flags & SQLITE_NoopUpdate ){
      Token x;
      sqlite3ExprDelete(db, pChanges->a[i].pExpr);
      x.z = pChanges->a[i].zEName;
      x.n = sqlite3Strlen30(x.z);
      pChanges->a[i].pExpr =
        sqlite3PExpr(pParse, TK_UPLUS, sqlite3ExprAlloc(db, TK_ID, &x, 0), 0);
      if( db->mallocFailed ) goto update_cleanup;
    }
#endif
    /* If this is an UPDATE with a FROM clause, do not resolve expressions
    ** here. The call to sqlite3Select() below will do that. */
    if( nChangeFrom==0 && sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
      goto update_cleanup;
    }
    j = sqlite3ColumnIndex(pTab, pChanges->a[i].zEName);
    if( j>=0 ){

  ** database. No locks are held on any other files (since the main file
  ** was committed at the btree level). So it safe to end the transaction
  ** by manually setting the autoCommit flag to true and detaching the
  ** vacuum database. The vacuum_db journal file is deleted when the pager
  ** is closed by the DETACH.
  */
  db->autoCommit = 1;
  assert( db->eConcurrent==0 );

  if( pDb ){
    sqlite3BtreeClose(pDb->pBt);
    pDb->pBt = 0;
    pDb->pSchema = 0;
  }

    }else{

      /* Determine whether or not this is a transaction savepoint. If so,
      ** and this is a RELEASE command, then the current transaction
      ** is committed.
      */
      int isTransaction = pSavepoint->pNext==0 && db->isTransactionSavepoint;
      assert( db->eConcurrent==0 || db->isTransactionSavepoint==0 );
      if( isTransaction && p1==SAVEPOINT_RELEASE ){
        if( (rc = sqlite3VdbeCheckFk(p, 1))!=SQLITE_OK ){
          goto vdbe_return;
        }
        db->autoCommit = 1;
        if( sqlite3VdbeHalt(p)==SQLITE_BUSY ){
          p->pc = (int)(pOp - aOp);

  if( p->eVdbeState==VDBE_HALT_STATE ){
    rc = SQLITE_DONE;
    goto vdbe_return;
  }
  break;
}

/* Opcode: AutoCommit P1 P2 * * *
/* Opcode: AutoCommit P1 P2 P3 * *
**
** Set the database auto-commit flag to P1 (1 or 0). If P2 is true, roll
** back any currently active btree transactions. If there are any active
** VMs (apart from this one), then a ROLLBACK fails.  A COMMIT fails if
** there are active writing VMs or active VMs that use shared cache.
**
** If P3 is non-zero, then this instruction is being executed as part of
** a "BEGIN CONCURRENT" command.
**
** This instruction causes the VM to halt.
*/
case OP_AutoCommit: {
  int desiredAutoCommit;
  int iRollback;
  int bConcurrent;
  int hrc;

  desiredAutoCommit = pOp->p1;
  iRollback = pOp->p2;
  bConcurrent = pOp->p3;
  assert( desiredAutoCommit==1 || desiredAutoCommit==0 );
  assert( desiredAutoCommit==1 || iRollback==0 );
  assert( desiredAutoCommit==0 || bConcurrent==0 );
  assert( db->autoCommit==0 || db->eConcurrent==CONCURRENT_NONE );
  assert( db->nVdbeActive>0 );  /* At least this one VM is active */
  assert( p->bIsReader );

  if( desiredAutoCommit!=db->autoCommit ){
    if( iRollback ){
      assert( desiredAutoCommit==1 );
      sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
      db->autoCommit = 1;
      db->eConcurrent = CONCURRENT_NONE;
    }else if( desiredAutoCommit && db->nVdbeWrite>0 ){
      /* If this instruction implements a COMMIT and other VMs are writing
      ** return an error indicating that the other VMs must complete first.
    }else if( desiredAutoCommit
            && (db->nVdbeWrite>0 || (db->eConcurrent && db->nVdbeActive>1)) ){
      /* A transaction may only be committed if there are no other active
      ** writer VMs. If the transaction is CONCURRENT, then it may only be
      ** committed if there are no active VMs at all (readers or writers).
      **
      ** If this instruction is a COMMIT and the transaction may not be
      ** committed due to one of the conditions above, return an error
      ** indicating that other VMs must complete before the COMMIT can 
      */
      ** be processed.  */
      sqlite3VdbeError(p, "cannot commit transaction - "
                          "SQL statements in progress");
      rc = SQLITE_BUSY;
      goto abort_due_to_error;
    }else if( (rc = sqlite3VdbeCheckFk(p, 1))!=SQLITE_OK ){
      goto vdbe_return;
    }else{
      db->autoCommit = (u8)desiredAutoCommit;
    }
    if( sqlite3VdbeHalt(p)==SQLITE_BUSY ){
    hrc = sqlite3VdbeHalt(p);
    if( (hrc & 0xFF)==SQLITE_BUSY ){
      p->pc = (int)(pOp - aOp);
      db->autoCommit = (u8)(1-desiredAutoCommit);
      p->rc = hrc;
      p->rc = rc = SQLITE_BUSY;
      rc = SQLITE_BUSY;
      goto vdbe_return;
    }
    assert( bConcurrent==CONCURRENT_NONE || bConcurrent==CONCURRENT_OPEN );
    db->eConcurrent = (u8)bConcurrent;
    sqlite3CloseSavepoints(db);
    if( p->rc==SQLITE_OK ){
      rc = SQLITE_DONE;
    }else{
      rc = SQLITE_ERROR;
    }
    goto vdbe_return;

  assert( pOp->p2<SQLITE_N_BTREE_META );
  assert( pOp->p1>=0 && pOp->p1<db->nDb );
  assert( DbMaskTest(p->btreeMask, pOp->p1) );
  assert( p->readOnly==0 );
  pDb = &db->aDb[pOp->p1];
  assert( pDb->pBt!=0 );
  assert( sqlite3SchemaMutexHeld(db, pOp->p1, 0) );
#ifndef SQLITE_OMIT_CONCURRENT
  if( db->eConcurrent 
   && (pOp->p2==BTREE_USER_VERSION || pOp->p2==BTREE_APPLICATION_ID)
  ){
    rc = SQLITE_ERROR;
    sqlite3VdbeError(p, "cannot modify %s within CONCURRENT transaction",
        pOp->p2==BTREE_USER_VERSION ? "user_version" : "application_id"
    );
    goto abort_due_to_error;
  }
#endif
  /* See note about index shifting on OP_ReadCookie */
  rc = sqlite3BtreeUpdateMeta(pDb->pBt, pOp->p2, pOp->p3);
  if( pOp->p2==BTREE_SCHEMA_VERSION ){
    /* When the schema cookie changes, record the new cookie internally */
    *(u32*)&pDb->pSchema->schema_cookie = *(u32*)&pOp->p3 - pOp->p5;
    db->mDbFlags |= DBFLAG_SchemaChange;
    sqlite3FkClearTriggerCache(db, pOp->p1);

  iDb = pOp->p3;
  assert( iDb>=0 && iDb<db->nDb );
  assert( DbMaskTest(p->btreeMask, iDb) );
  pDb = &db->aDb[iDb];
  pX = pDb->pBt;
  assert( pX!=0 );
  if( pOp->opcode==OP_OpenWrite ){
#ifndef SQLITE_OMIT_CONCURRENT
    if( db->eConcurrent==CONCURRENT_OPEN && p2==1 && iDb!=1 ){
      db->eConcurrent = CONCURRENT_SCHEMA;
    }
#endif
    assert( OPFLAG_FORDELETE==BTREE_FORDELETE );
    wrFlag = BTREE_WRCSR | (pOp->p5 & OPFLAG_FORDELETE);
    assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
    if( pDb->pSchema->file_format < p->minWriteFileFormat ){
      p->minWriteFileFormat = pDb->pSchema->file_format;
    }
    if( pOp->p5 & OPFLAG_P2ISREG ){

** P2 contains the root-page of the table to lock.
**
** P4 contains a pointer to the name of the table being locked. This is only
** used to generate an error message if the lock cannot be obtained.
*/
case OP_TableLock: {
  u8 isWriteLock = (u8)pOp->p3;
#ifndef SQLITE_OMIT_CONCURRENT
  if( isWriteLock && db->eConcurrent && pOp->p2==1 && pOp->p1!=1 ){
    db->eConcurrent = CONCURRENT_SCHEMA;
  }
#endif
  if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommit) ){
    int p1 = pOp->p1;
    assert( p1>=0 && p1<db->nDb );
    assert( DbMaskTest(p->btreeMask, p1) );
    assert( isWriteLock==0 || isWriteLock==1 );
    rc = sqlite3BtreeLockTable(db->aDb[p1].pBt, pOp->p2, isWriteLock);
    if( rc ){

      if( db->aDb[i].safety_level!=PAGER_SYNCHRONOUS_OFF
       && aMJNeeded[sqlite3PagerGetJournalMode(pPager)]
       && sqlite3PagerIsMemdb(pPager)==0
      ){
        assert( i!=1 );
        nTrans++;
      }
      rc = sqlite3PagerExclusiveLock(pPager);
      rc = sqlite3BtreeExclusiveLock(pBt);
      sqlite3BtreeLeave(pBt);
    }
  }

#ifndef SQLITE_OMIT_CONCURRENT
  if( db->eConcurrent && (rc & 0xFF)==SQLITE_BUSY ){
    /* An SQLITE_BUSY or SQLITE_BUSY_SNAPSHOT was encountered while 
    ** attempting to take the WRITER lock on a wal file. Release the
    ** WRITER locks on all wal files and return early.  */
    for(i=0; i<db->nDb; i++){
      Btree *pBt = db->aDb[i].pBt;
      if( sqlite3BtreeTxnState(pBt)==SQLITE_TXN_WRITE ){
        sqlite3BtreeEnter(pBt);
        sqlite3PagerDropExclusiveLock(sqlite3BtreePager(pBt));
        sqlite3BtreeLeave(pBt);
      }
    }
  }
#endif

  if( rc!=SQLITE_OK ){
    return rc;
  }

  /* If there are any write-transactions at all, invoke the commit hook */
  if( needXcommit && db->xCommitCallback ){
    rc = db->xCommitCallback(db->pCommitArg);

        }else{
          /* We are forced to roll back the active transaction. Before doing
          ** so, abort any other statements this handle currently has active.
          */
          sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
          sqlite3CloseSavepoints(db);
          db->autoCommit = 1;
          db->eConcurrent = CONCURRENT_NONE;
          p->nChange = 0;
        }
      }
    }

    /* Check for immediate foreign key violations. */
    if( p->rc==SQLITE_OK || (p->errorAction==OE_Fail && !isSpecialError) ){

        }else{
          /* The auto-commit flag is true, the vdbe program was successful
          ** or hit an 'OR FAIL' constraint and there are no deferred foreign
          ** key constraints to hold up the transaction. This means a commit
          ** is required. */
          rc = vdbeCommit(db, p);
        }
        if( rc==SQLITE_BUSY && p->readOnly ){
        if( (rc & 0xFF)==SQLITE_BUSY && p->readOnly ){
          sqlite3VdbeLeave(p);
          return SQLITE_BUSY;
          return rc;
        }else if( rc!=SQLITE_OK ){
          sqlite3SystemError(db, rc);
          p->rc = rc;
          sqlite3RollbackAll(db, SQLITE_OK);
          p->nChange = 0;
        }else{
          db->nDeferredCons = 0;

        eStatementOp = SAVEPOINT_RELEASE;
      }else if( p->errorAction==OE_Abort ){
        eStatementOp = SAVEPOINT_ROLLBACK;
      }else{
        sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
        sqlite3CloseSavepoints(db);
        db->autoCommit = 1;
        db->eConcurrent = CONCURRENT_NONE;
        p->nChange = 0;
      }
    }
 
    /* If eStatementOp is non-zero, then a statement transaction needs to
    ** be committed or rolled back. Call sqlite3VdbeCloseStatement() to
    ** do so. If this operation returns an error, and the current statement

          p->rc = rc;
          sqlite3DbFree(db, p->zErrMsg);
          p->zErrMsg = 0;
        }
        sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
        sqlite3CloseSavepoints(db);
        db->autoCommit = 1;
        db->eConcurrent = CONCURRENT_NONE;
        p->nChange = 0;
      }
    }
 
    /* If this was an INSERT, UPDATE or DELETE and no statement transaction
    ** has been rolled back, update the database connection change-counter.
    */

  u8 truncateOnCommit;       /* True to truncate WAL file on commit */
  u8 syncHeader;             /* Fsync the WAL header if true */
  u8 padToSectorBoundary;    /* Pad transactions out to the next sector */
  u8 bShmUnreliable;         /* SHM content is read-only and unreliable */
  WalIndexHdr hdr;           /* Wal-index header for current transaction */
  u32 minFrame;              /* Ignore wal frames before this one */
  u32 iReCksum;              /* On commit, recalculate checksums from here */
  u32 nPriorFrame;           /* For sqlite3WalInfo() */
  const char *zWalName;      /* Name of WAL file */
  u32 nCkpt;                 /* Checkpoint sequence counter in the wal-header */
  FastPrng sPrng;            /* Random number generator */
#ifdef SQLITE_USE_SEH
  u32 lockMask;              /* Mask of locks held */
  void *pFree;               /* Pointer to sqlite3_free() if exception thrown */
  u32 *pWiValue;             /* Value to write into apWiData[iWiPg] */
  int iWiPg;                 /* Write pWiValue into apWiData[iWiPg] */
  int iSysErrno;             /* System error code following exception */
#endif

}
#endif /*defined(SQLITE_TEST) || defined(SQLITE_DEBUG) */


/*
** Set or release locks on the WAL.  Locks are either shared or exclusive.
** A lock cannot be moved directly between shared and exclusive - it must go
** through the unlocked state first.
** through the concurrent state first.
**
** In locking_mode=EXCLUSIVE, all of these routines become no-ops.
*/
static int walLockShared(Wal *pWal, int lockIdx){
  int rc;
  if( pWal->exclusiveMode ) return SQLITE_OK;
  rc = sqlite3OsShmLock(pWal->pDbFd, lockIdx, 1,