Index: Makefile.msc
==================================================================
--- Makefile.msc
+++ Makefile.msc
@@ -19,13 +19,27 @@
 # Set this non-0 to enable full warnings (-W4, etc) when compiling.
 #
 !IFNDEF USE_FULLWARN
 USE_FULLWARN = 0
 !ENDIF
+
+# Set this non-0 to use "stdcall" calling convention for the core library
+# and shell executable.
+#
+!IFNDEF USE_STDCALL
+USE_STDCALL = 0
+!ENDIF
+
+# Set this non-0 to have the shell executable link against the core dynamic
+# link library.
+#
+!IFNDEF DYNAMIC_SHELL
+DYNAMIC_SHELL = 0
+!ENDIF
 
 # If necessary, create a list of harmless compiler warnings to disable when
-# compiling the build tools.  For the SQLite source code itself, warnings,
+# compiling the various tools.  For the SQLite source code itself, warnings,
 # if any, will be disabled from within it.
 #
 !IFNDEF NO_WARN
 !IF $(USE_FULLWARN)!=0
 NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4152 -wd4189 -wd4206 -wd4210
@@ -248,13 +262,13 @@
 
 # C compiler and options for use in building executables that
 # will run on the platform that is doing the build.
 #
 !IF $(USE_FULLWARN)!=0
-BCC = $(NCC) -W4
+BCC = $(NCC) -nologo -W4
 !ELSE
-BCC = $(NCC) -W3
+BCC = $(NCC) -nologo -W3
 !ENDIF
 
 # Check if assembly code listings should be generated for the source
 # code files to be compiled.
 #
@@ -273,17 +287,109 @@
 # C compiler and options for use in building executables that
 # will run on the target platform.  (BCC and TCC are usually the
 # same unless your are cross-compiling.)
 #
 !IF $(USE_FULLWARN)!=0
-TCC = $(CC) -W4 -DINCLUDE_MSVC_H=1
+TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1
 !ELSE
-TCC = $(CC) -W3
+TCC = $(CC) -nologo -W3
 !ENDIF
 
 TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise
 RCC = $(RC) -DSQLITE_OS_WIN=1 -I$(TOP) -I$(TOP)\src
+
+# Check if we want to use the "stdcall" calling convention when compiling.
+# This is not supported by the compilers for non-x86 platforms.  It should
+# also be noted here that building any target with these "stdcall" options
+# will most likely fail if the Tcl library is also required.  This is due
+# to how the Tcl library functions are declared and exported (i.e. without
+# an explicit calling convention, which results in "cdecl").
+#
+!IF $(USE_STDCALL)!=0
+!IF "$(PLATFORM)"=="x86"
+CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
+SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
+!ELSE
+!IFNDEF PLATFORM
+CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
+SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_STDCALL=__stdcall
+!ELSE
+CORE_CCONV_OPTS =
+SHELL_CCONV_OPTS =
+!ENDIF
+!ENDIF
+!ELSE
+CORE_CCONV_OPTS =
+SHELL_CCONV_OPTS =
+!ENDIF
+
+# These are additional compiler options used for the core library.
+#
+!IFNDEF CORE_COMPILE_OPTS
+!IF $(USE_STDCALL)!=0
+CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
+!ELSE
+CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
+!ENDIF
+!ENDIF
+
+# These are the additional targets that the core library should depend on
+# when linking.
+#
+!IFNDEF CORE_LINK_DEP
+!IF $(USE_STDCALL)!=0
+CORE_LINK_DEP =
+!ELSE
+CORE_LINK_DEP = sqlite3.def
+!ENDIF
+!ENDIF
+
+# These are additional linker options used for the core library.
+#
+!IFNDEF CORE_LINK_OPTS
+!IF $(USE_STDCALL)!=0
+CORE_LINK_OPTS =
+!ELSE
+CORE_LINK_OPTS = /DEF:sqlite3.def
+!ENDIF
+!ENDIF
+
+# These are additional compiler options used for the shell executable.
+#
+!IFNDEF SHELL_COMPILE_OPTS
+!IF $(DYNAMIC_SHELL)!=0
+SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)
+!ELSE
+SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)
+!ENDIF
+!ENDIF
+
+# This is the core library that the shell executable should depend on.
+#
+!IFNDEF SHELL_CORE_DEP
+!IF $(DYNAMIC_SHELL)!=0
+SHELL_CORE_DEP = sqlite3.dll
+!ELSE
+SHELL_CORE_DEP = libsqlite3.lib
+!ENDIF
+!ENDIF
+
+# This is the core library that the shell executable should link with.
+#
+!IFNDEF SHELL_CORE_LIB
+!IF $(DYNAMIC_SHELL)!=0
+SHELL_CORE_LIB = sqlite3.lib
+!ELSE
+SHELL_CORE_LIB = libsqlite3.lib
+!ENDIF
+!ENDIF
+
+# These are additional linker options used for the shell executable.
+#
+!IFNDEF SHELL_LINK_OPTS
+SHELL_LINK_OPTS = $(SHELL_CORE_LIB)
+!ENDIF
 
 # Check if assembly code listings should be generated for the source
 # code files to be compiled.
 #
 !IF $(USE_LISTINGS)!=0
@@ -567,12 +673,15 @@
 # If a platform was set, force the linker to target that.
 # Note that the vcvars*.bat family of batch files typically
 # set this for you.  Otherwise, the linker will attempt
 # to deduce the binary type based on the object files.
 !IFDEF PLATFORM
-LTLINKOPTS = /MACHINE:$(PLATFORM)
-LTLIBOPTS = /MACHINE:$(PLATFORM)
+LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM)
+LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM)
+!ELSE
+LTLINKOPTS = /NOLOGO
+LTLIBOPTS = /NOLOGO
 !ENDIF
 
 # When compiling for use in the WinRT environment, the following
 # linker option must be used to mark the executable as runnable
 # only in the context of an application container.
@@ -694,11 +803,11 @@
 LIBRESOBJS =
 !ENDIF
 
 # All of the source code files.
 #
-SRC = \
+SRC1 = \
   $(TOP)\src\alter.c \
   $(TOP)\src\analyze.c \
   $(TOP)\src\attach.c \
   $(TOP)\src\auth.c \
   $(TOP)\src\backup.c \
@@ -744,11 +853,12 @@
   $(TOP)\src\os.h \
   $(TOP)\src\os_common.h \
   $(TOP)\src\os_setup.h \
   $(TOP)\src\os_unix.c \
   $(TOP)\src\os_win.c \
-  $(TOP)\src\os_win.h \
+  $(TOP)\src\os_win.h
+SRC2 = \
   $(TOP)\src\pager.c \
   $(TOP)\src\pager.h \
   $(TOP)\src\parse.y \
   $(TOP)\src\pcache.c \
   $(TOP)\src\pcache.h \
@@ -791,29 +901,28 @@
   $(TOP)\src\where.c \
   $(TOP)\src\whereInt.h
 
 # Source code for extensions
 #
-SRC = $(SRC) \
+SRC3 = \
   $(TOP)\ext\fts1\fts1.c \
   $(TOP)\ext\fts1\fts1.h \
   $(TOP)\ext\fts1\fts1_hash.c \
   $(TOP)\ext\fts1\fts1_hash.h \
   $(TOP)\ext\fts1\fts1_porter.c \
   $(TOP)\ext\fts1\fts1_tokenizer.h \
-  $(TOP)\ext\fts1\fts1_tokenizer1.c
-SRC = $(SRC) \
+  $(TOP)\ext\fts1\fts1_tokenizer1.c \
   $(TOP)\ext\fts2\fts2.c \
   $(TOP)\ext\fts2\fts2.h \
   $(TOP)\ext\fts2\fts2_hash.c \
   $(TOP)\ext\fts2\fts2_hash.h \
   $(TOP)\ext\fts2\fts2_icu.c \
   $(TOP)\ext\fts2\fts2_porter.c \
   $(TOP)\ext\fts2\fts2_tokenizer.h \
   $(TOP)\ext\fts2\fts2_tokenizer.c \
   $(TOP)\ext\fts2\fts2_tokenizer1.c
-SRC = $(SRC) \
+SRC4 = \
   $(TOP)\ext\fts3\fts3.c \
   $(TOP)\ext\fts3\fts3.h \
   $(TOP)\ext\fts3\fts3Int.h \
   $(TOP)\ext\fts3\fts3_aux.c \
   $(TOP)\ext\fts3\fts3_expr.c \
@@ -826,29 +935,31 @@
   $(TOP)\ext\fts3\fts3_tokenizer.c \
   $(TOP)\ext\fts3\fts3_tokenizer1.c \
   $(TOP)\ext\fts3\fts3_tokenize_vtab.c \
   $(TOP)\ext\fts3\fts3_unicode.c \
   $(TOP)\ext\fts3\fts3_unicode2.c \
-  $(TOP)\ext\fts3\fts3_write.c
-SRC = $(SRC) \
+  $(TOP)\ext\fts3\fts3_write.c \
   $(TOP)\ext\icu\sqliteicu.h \
-  $(TOP)\ext\icu\icu.c
-SRC = $(SRC) \
+  $(TOP)\ext\icu\icu.c \
   $(TOP)\ext\rtree\rtree.h \
   $(TOP)\ext\rtree\rtree.c
 
 
 # Generated source code files
 #
-SRC = $(SRC) \
+SRC5 = \
   keywordhash.h \
   opcodes.c \
   opcodes.h \
   parse.c \
   parse.h \
   sqlite3.h
 
+# All source code files.
+#
+SRC = $(SRC1) $(SRC2) $(SRC3) $(SRC4) $(SRC5)
+
 # Source code to the test files.
 #
 TESTSRC = \
   $(TOP)\src\test1.c \
   $(TOP)\src\test2.c \
@@ -1015,29 +1126,33 @@
 	$(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS)
 
 libtclsqlite3.lib:	tclsqlite.lo libsqlite3.lib
 	$(LTLIB) $(LTLIBOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCL:tcl=tclstub) $(TLIBS)
 
-sqlite3.exe:	$(TOP)\src\shell.c libsqlite3.lib $(LIBRESOBJS) sqlite3.h
-	$(LTLINK) $(READLINE_FLAGS) $(TOP)\src\shell.c \
-		/link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)
+sqlite3.exe:	$(TOP)\src\shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) sqlite3.h
+	$(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) $(TOP)\src\shell.c \
+		/link /pdb:sqlite3sh.pdb $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)
 
-mptester.exe:	$(TOP)\mptest\mptest.c libsqlite3.lib $(LIBRESOBJS) sqlite3.h
-	$(LTLINK) $(TOP)\mptest\mptest.c \
-		/link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)
+mptester.exe:	$(TOP)\mptest\mptest.c $(SHELL_CORE_DEP) $(LIBRESOBJS) sqlite3.h
+	$(LTLINK) $(SHELL_COMPILE_OPTS) $(TOP)\mptest\mptest.c \
+		/link $(LTLINKOPTS) $(LTLIBPATHS) $(SHELL_LINK_OPTS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)
 
 # This target creates a directory named "tsrc" and fills it with
 # copies of all of the C source code and header files needed to
 # build on the target system.  Some of the C source code and header
 # files are automatically generated.  This target takes care of
 # all that automatic generation.
 #
 .target_source:	$(SRC) $(TOP)\tool\vdbe-compress.tcl
-	-rmdir /S/Q tsrc
+	-rmdir /Q/S tsrc 2>NUL
 	-mkdir tsrc
-	for %i in ($(SRC)) do copy /Y %i tsrc
-	del /Q tsrc\sqlite.h.in tsrc\parse.y
+	for %i in ($(SRC1)) do copy /Y %i tsrc
+	for %i in ($(SRC2)) do copy /Y %i tsrc
+	for %i in ($(SRC3)) do copy /Y %i tsrc
+	for %i in ($(SRC4)) do copy /Y %i tsrc
+	for %i in ($(SRC5)) do copy /Y %i tsrc
+	del /Q tsrc\sqlite.h.in tsrc\parse.y 2>NUL
 	$(TCLSH_CMD) $(TOP)\tool\vdbe-compress.tcl $(OPTS) < tsrc\vdbe.c > vdbe.new
 	move vdbe.new tsrc\vdbe.c
 	echo > .target_source
 
 sqlite3.c:	.target_source $(TOP)\tool\mksqlite3c.tcl
@@ -1058,11 +1173,11 @@
 !ENDIF
 
 # Rule to build the amalgamation
 #
 sqlite3.lo:	$(SQLITE3C)
-	$(LTCOMPILE) -c $(SQLITE3C)
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C)
 
 # Rules to build the LEMON compiler generator
 #
 lempar.c:	$(TOP)\src\lempar.c
 	copy $(TOP)\src\lempar.c .
@@ -1076,14 +1191,14 @@
 #
 #     parse.lo
 #     opcodes.lo
 #
 parse.lo:	parse.c $(HDR)
-	$(LTCOMPILE) -c parse.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c parse.c
 
 opcodes.lo:	opcodes.c
-	$(LTCOMPILE) -c opcodes.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c opcodes.c
 
 # Rule to build the Win32 resources object file.
 #
 !IF $(USE_RC)!=0
 $(LIBRESOBJS):	$(TOP)\src\sqlite3.rc $(HDR)
@@ -1097,227 +1212,227 @@
 !ENDIF
 
 # Rules to build individual *.lo files from files in the src directory.
 #
 alter.lo:	$(TOP)\src\alter.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\alter.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\alter.c
 
 analyze.lo:	$(TOP)\src\analyze.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\analyze.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\analyze.c
 
 attach.lo:	$(TOP)\src\attach.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\attach.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\attach.c
 
 auth.lo:	$(TOP)\src\auth.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\auth.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\auth.c
 
 backup.lo:	$(TOP)\src\backup.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\backup.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\backup.c
 
 bitvec.lo:	$(TOP)\src\bitvec.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\bitvec.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\bitvec.c
 
 btmutex.lo:	$(TOP)\src\btmutex.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\btmutex.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btmutex.c
 
 btree.lo:	$(TOP)\src\btree.c $(HDR) $(TOP)\src\pager.h
-	$(LTCOMPILE) -c $(TOP)\src\btree.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btree.c
 
 build.lo:	$(TOP)\src\build.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\build.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\build.c
 
 callback.lo:	$(TOP)\src\callback.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\callback.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\callback.c
 
 complete.lo:	$(TOP)\src\complete.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\complete.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\complete.c
 
 ctime.lo:	$(TOP)\src\ctime.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\ctime.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\ctime.c
 
 date.lo:	$(TOP)\src\date.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\date.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\date.c
 
 delete.lo:	$(TOP)\src\delete.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\delete.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\delete.c
 
 expr.lo:	$(TOP)\src\expr.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\expr.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\expr.c
 
 fault.lo:	$(TOP)\src\fault.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\fault.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fault.c
 
 fkey.lo:	$(TOP)\src\fkey.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\fkey.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fkey.c
 
 func.lo:	$(TOP)\src\func.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\func.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\func.c
 
 global.lo:	$(TOP)\src\global.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\global.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\global.c
 
 hash.lo:	$(TOP)\src\hash.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\hash.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\hash.c
 
 insert.lo:	$(TOP)\src\insert.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\insert.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\insert.c
 
 journal.lo:	$(TOP)\src\journal.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\journal.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\journal.c
 
 legacy.lo:	$(TOP)\src\legacy.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\legacy.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\legacy.c
 
 loadext.lo:	$(TOP)\src\loadext.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\loadext.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\loadext.c
 
 main.lo:	$(TOP)\src\main.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\main.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\main.c
 
 malloc.lo:	$(TOP)\src\malloc.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\malloc.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\malloc.c
 
 mem0.lo:	$(TOP)\src\mem0.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mem0.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem0.c
 
 mem1.lo:	$(TOP)\src\mem1.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mem1.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem1.c
 
 mem2.lo:	$(TOP)\src\mem2.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mem2.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem2.c
 
 mem3.lo:	$(TOP)\src\mem3.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mem3.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem3.c
 
 mem5.lo:	$(TOP)\src\mem5.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mem5.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem5.c
 
 memjournal.lo:	$(TOP)\src\memjournal.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\memjournal.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\memjournal.c
 
 mutex.lo:	$(TOP)\src\mutex.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mutex.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex.c
 
 mutex_noop.lo:	$(TOP)\src\mutex_noop.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mutex_noop.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_noop.c
 
 mutex_unix.lo:	$(TOP)\src\mutex_unix.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mutex_unix.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_unix.c
 
 mutex_w32.lo:	$(TOP)\src\mutex_w32.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\mutex_w32.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_w32.c
 
 notify.lo:	$(TOP)\src\notify.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\notify.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\notify.c
 
 pager.lo:	$(TOP)\src\pager.c $(HDR) $(TOP)\src\pager.h
-	$(LTCOMPILE) -c $(TOP)\src\pager.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pager.c
 
 pcache.lo:	$(TOP)\src\pcache.c $(HDR) $(TOP)\src\pcache.h
-	$(LTCOMPILE) -c $(TOP)\src\pcache.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache.c
 
 pcache1.lo:	$(TOP)\src\pcache1.c $(HDR) $(TOP)\src\pcache.h
-	$(LTCOMPILE) -c $(TOP)\src\pcache1.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache1.c
 
 os.lo:	$(TOP)\src\os.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\os.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os.c
 
 os_unix.lo:	$(TOP)\src\os_unix.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\os_unix.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_unix.c
 
 os_win.lo:	$(TOP)\src\os_win.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\os_win.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_win.c
 
 pragma.lo:	$(TOP)\src\pragma.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\pragma.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pragma.c
 
 prepare.lo:	$(TOP)\src\prepare.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\prepare.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\prepare.c
 
 printf.lo:	$(TOP)\src\printf.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\printf.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\printf.c
 
 random.lo:	$(TOP)\src\random.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\random.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\random.c
 
 resolve.lo:	$(TOP)\src\resolve.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\resolve.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\resolve.c
 
 rowset.lo:	$(TOP)\src\rowset.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\rowset.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\rowset.c
 
 select.lo:	$(TOP)\src\select.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\select.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\select.c
 
 status.lo:	$(TOP)\src\status.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\status.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\status.c
 
 table.lo:	$(TOP)\src\table.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\table.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\table.c
 
 threads.lo:	$(TOP)\src\threads.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\threads.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\threads.c
 
 tokenize.lo:	$(TOP)\src\tokenize.c keywordhash.h $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\tokenize.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\tokenize.c
 
 trigger.lo:	$(TOP)\src\trigger.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\trigger.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\trigger.c
 
 update.lo:	$(TOP)\src\update.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\update.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\update.c
 
 utf.lo:	$(TOP)\src\utf.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\utf.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\utf.c
 
 util.lo:	$(TOP)\src\util.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\util.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\util.c
 
 vacuum.lo:	$(TOP)\src\vacuum.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vacuum.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vacuum.c
 
 vdbe.lo:	$(TOP)\src\vdbe.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbe.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbe.c
 
 vdbeapi.lo:	$(TOP)\src\vdbeapi.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbeapi.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeapi.c
 
 vdbeaux.lo:	$(TOP)\src\vdbeaux.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbeaux.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeaux.c
 
 vdbeblob.lo:	$(TOP)\src\vdbeblob.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbeblob.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeblob.c
 
 vdbemem.lo:	$(TOP)\src\vdbemem.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbemem.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbemem.c
 
 vdbesort.lo:	$(TOP)\src\vdbesort.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbesort.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbesort.c
 
 vdbetrace.lo:	$(TOP)\src\vdbetrace.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vdbetrace.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbetrace.c
 
 vtab.lo:	$(TOP)\src\vtab.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\vtab.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vtab.c
 
 wal.lo:	$(TOP)\src\wal.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\wal.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\wal.c
 
 walker.lo:	$(TOP)\src\walker.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\walker.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\walker.c
 
 where.lo:	$(TOP)\src\where.c $(HDR)
-	$(LTCOMPILE) -c $(TOP)\src\where.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\where.c
 
 tclsqlite.lo:	$(TOP)\src\tclsqlite.c $(HDR)
-	$(LTCOMPILE) -DUSE_TCL_STUBS=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c
+	$(LTCOMPILE) $(NO_WARN) -DUSE_TCL_STUBS=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c
 
 tclsqlite-shell.lo:	$(TOP)\src\tclsqlite.c $(HDR)
-	$(LTCOMPILE) -DTCLSH=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c
+	$(LTCOMPILE) $(NO_WARN) -DTCLSH=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c
 
-tclsqlite3.exe:	tclsqlite-shell.lo libsqlite3.lib $(LIBRESOBJS)
-	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /OUT:$@ libsqlite3.lib tclsqlite-shell.lo $(LIBRESOBJS) $(LTLIBS) $(TLIBS)
+tclsqlite3.exe:	tclsqlite-shell.lo $(SQLITE3C) $(LIBRESOBJS)
+	$(LTLINK) $(SQLITE3C) /link $(LTLINKOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite-shell.lo $(LIBRESOBJS) $(LTLIBS) $(TLIBS)
 
 # Rules to build opcodes.c and opcodes.h
 #
 opcodes.c:	opcodes.h $(TOP)\mkopcodec.awk
 	$(NAWK) -f $(TOP)\mkopcodec.awk opcodes.h > opcodes.c
@@ -1328,11 +1443,11 @@
 # Rules to build parse.c and parse.h - the outputs of lemon.
 #
 parse.h:	parse.c
 
 parse.c:	$(TOP)\src\parse.y lemon.exe $(TOP)\addopcodes.awk
-	del /Q parse.y parse.h parse.h.temp
+	del /Q parse.y parse.h parse.h.temp 2>NUL
 	copy $(TOP)\src\parse.y .
 	.\lemon.exe $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(OPTS) parse.y
 	move parse.h parse.h.temp
 	$(NAWK) -f $(TOP)\addopcodes.awk parse.h.temp > parse.h
 
@@ -1349,71 +1464,71 @@
 
 
 # Rules to build the extension objects.
 #
 icu.lo:	$(TOP)\ext\icu\icu.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\icu\icu.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\icu\icu.c
 
 fts2.lo:	$(TOP)\ext\fts2\fts2.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2.c
 
 fts2_hash.lo:	$(TOP)\ext\fts2\fts2_hash.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_hash.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_hash.c
 
 fts2_icu.lo:	$(TOP)\ext\fts2\fts2_icu.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_icu.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_icu.c
 
 fts2_porter.lo:	$(TOP)\ext\fts2\fts2_porter.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_porter.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_porter.c
 
 fts2_tokenizer.lo:	$(TOP)\ext\fts2\fts2_tokenizer.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer.c
 
 fts2_tokenizer1.lo:	$(TOP)\ext\fts2\fts2_tokenizer1.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer1.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer1.c
 
 fts3.lo:	$(TOP)\ext\fts3\fts3.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3.c
 
 fts3_aux.lo:	$(TOP)\ext\fts3\fts3_aux.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_aux.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_aux.c
 
 fts3_expr.lo:	$(TOP)\ext\fts3\fts3_expr.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_expr.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_expr.c
 
 fts3_hash.lo:	$(TOP)\ext\fts3\fts3_hash.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_hash.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_hash.c
 
 fts3_icu.lo:	$(TOP)\ext\fts3\fts3_icu.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_icu.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_icu.c
 
 fts3_snippet.lo:	$(TOP)\ext\fts3\fts3_snippet.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_snippet.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_snippet.c
 
 fts3_porter.lo:	$(TOP)\ext\fts3\fts3_porter.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_porter.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_porter.c
 
 fts3_tokenizer.lo:	$(TOP)\ext\fts3\fts3_tokenizer.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer.c
 
 fts3_tokenizer1.lo:	$(TOP)\ext\fts3\fts3_tokenizer1.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer1.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer1.c
 
 fts3_tokenize_vtab.lo:	$(TOP)\ext\fts3\fts3_tokenize_vtab.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenize_vtab.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenize_vtab.c
 
 fts3_unicode.lo:	$(TOP)\ext\fts3\fts3_unicode.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode.c
 
 fts3_unicode2.lo:	$(TOP)\ext\fts3\fts3_unicode2.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode2.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode2.c
 
 fts3_write.lo:	$(TOP)\ext\fts3\fts3_write.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_write.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_write.c
 
 rtree.lo:	$(TOP)\ext\rtree\rtree.c $(HDR) $(EXTHDR)
-	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\rtree\rtree.c
+	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\rtree\rtree.c
 
 
 # Rules to build the 'testfixture' application.
 #
 # If using the amalgamation, use sqlite3.c directly to build the test
@@ -1423,11 +1538,11 @@
 #
 TESTFIXTURE_FLAGS = -DTCLSH=1 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERVER=1 -DSQLITE_PRIVATE=""
 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CORE $(NO_WARN)
 
-TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2) libsqlite3.lib
+TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2) $(SHELL_CORE_DEP)
 TESTFIXTURE_SRC1 = $(TESTEXT) $(SQLITE3C)
 !IF $(USE_AMALGAMATION)==0
 TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC0)
 !ELSE
 TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC1)
@@ -1463,81 +1578,80 @@
 	echo static const char *zMainloop = >> $@
 	$(NAWK) -f $(TOP)\tool\tostr.awk $(TOP)\tool\spaceanal.tcl >> $@
 	echo ; return zMainloop; } >> $@
 
 sqlite3_analyzer.exe:	sqlite3_analyzer.c $(LIBRESOBJS)
-	$(LTLINK) -DBUILD_sqlite -DTCLSH=2 -I$(TCLINCDIR) sqlite3_analyzer.c \
+	$(LTLINK) $(NO_WARN) -DBUILD_sqlite -DTCLSH=2 -I$(TCLINCDIR) sqlite3_analyzer.c \
 		/link $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)
 
 testloadext.lo:	$(TOP)\src\test_loadext.c
-	$(LTCOMPILE) -c $(TOP)\src\test_loadext.c
+	$(LTCOMPILE) $(NO_WARN) -c $(TOP)\src\test_loadext.c
 
 testloadext.dll: testloadext.lo
 	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ testloadext.lo
 
 showdb.exe:	$(TOP)\tool\showdb.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\tool\showdb.c $(SQLITE3C)
 
 showstat4.exe:	$(TOP)\tool\showstat4.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\tool\showstat4.c $(SQLITE3C)
 
 showjournal.exe:	$(TOP)\tool\showjournal.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\tool\showjournal.c $(SQLITE3C)
 
 showwal.exe:	$(TOP)\tool\showwal.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\tool\showwal.c $(SQLITE3C)
 
 fts3view.exe:	$(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C)
 
 rollback-test.exe:	$(TOP)\tool\rollback-test.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\tool\rollback-test.c $(SQLITE3C)
 
 LogEst.exe:	$(TOP)\tool\logest.c sqlite3.h
-	$(LTLINK) -Fe$@ $(TOP)\tool\LogEst.c
+	$(LTLINK) $(NO_WARN) -Fe$@ $(TOP)\tool\LogEst.c
 
 wordcount.exe:	$(TOP)\test\wordcount.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\test\wordcount.c $(SQLITE3C)
 
 speedtest1.exe:	$(TOP)\test\speedtest1.c $(SQLITE3C)
-	$(LTLINK) -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
+	$(LTLINK) $(NO_WARN) -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \
 		$(TOP)\test\speedtest1.c $(SQLITE3C)
 
 clean:
-	del /Q *.lo *.ilk *.lib *.obj *.pdb sqlite3.exe libsqlite3.lib
-	del /Q *.cod *.da *.bb *.bbg gmon.out
-	del /Q sqlite3.h opcodes.c opcodes.h
-	del /Q lemon.* lempar.c parse.*
-	del /Q mkkeywordhash.* keywordhash.h
-	del /Q notasharedlib.*
-	-rmdir /Q/S .deps
-	-rmdir /Q/S .libs
-	-rmdir /Q/S quota2a
-	-rmdir /Q/S quota2b
-	-rmdir /Q/S quota2c
-	-rmdir /Q/S tsrc
-	del /Q .target_source
-	del /Q tclsqlite3.exe tclsqlite3.exp
-	del /Q testloadext.dll testloadext.exp
-	del /Q testfixture.exe testfixture.exp test.db
-	del /Q LogEst.exe fts3view.exe rollback-test.exe showdb.exe
-	del /Q showjournal.exe showstat4.exe showwal.exe speedtest1.exe
-	del /Q wordcount.exe
-	del /Q sqlite3.dll sqlite3.lib sqlite3.exp sqlite3.def
-	del /Q sqlite3.c sqlite3-*.c
-	del /Q sqlite3rc.h
-	del /Q shell.c sqlite3ext.h
-	del /Q sqlite3_analyzer.exe sqlite3_analyzer.exp sqlite3_analyzer.c
-	del /Q sqlite-*-output.vsix
-	del /Q mptester.exe
+	del /Q *.exp *.lo *.ilk *.lib *.obj *.pdb 2>NUL
+	del /Q *.cod *.da *.bb *.bbg gmon.out 2>NUL
+	del /Q sqlite3.h opcodes.c opcodes.h 2>NUL
+	del /Q lemon.* lempar.c parse.* 2>NUL
+	del /Q mkkeywordhash.* keywordhash.h 2>NUL
+	del /Q notasharedlib.* 2>NUL
+	-rmdir /Q/S .deps 2>NUL
+	-rmdir /Q/S .libs 2>NUL
+	-rmdir /Q/S quota2a 2>NUL
+	-rmdir /Q/S quota2b 2>NUL
+	-rmdir /Q/S quota2c 2>NUL
+	-rmdir /Q/S tsrc 2>NUL
+	del /Q .target_source 2>NUL
+	del /Q tclsqlite3.exe 2>NUL
+	del /Q testloadext.dll 2>NUL
+	del /Q testfixture.exe test.db 2>NUL
+	del /Q LogEst.exe fts3view.exe rollback-test.exe showdb.exe 2>NUL
+	del /Q showjournal.exe showstat4.exe showwal.exe speedtest1.exe 2>NUL
+	del /Q mptester.exe wordcount.exe 2>NUL
+	del /Q sqlite3.exe sqlite3.dll sqlite3.def 2>NUL
+	del /Q sqlite3.c sqlite3-*.c 2>NUL
+	del /Q sqlite3rc.h 2>NUL
+	del /Q shell.c sqlite3ext.h 2>NUL
+	del /Q sqlite3_analyzer.exe sqlite3_analyzer.c 2>NUL
+	del /Q sqlite-*-output.vsix 2>NUL
 
 # Dynamic link library section.
 #
 dll: sqlite3.dll
 
@@ -1545,7 +1659,7 @@
 	echo EXPORTS > sqlite3.def
 	dumpbin /all libsqlite3.lib \
 		| $(NAWK) "/ 1 _?sqlite3_/ { sub(/^.* _?/,\"\");print }" \
 		| sort >> sqlite3.def
 
-sqlite3.dll: $(LIBOBJ) $(LIBRESOBJS) sqlite3.def
-	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /DEF:sqlite3.def /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)
+sqlite3.dll: $(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP)
+	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

Index: ext/fts3/fts3_write.c
==================================================================
--- ext/fts3/fts3_write.c
+++ ext/fts3/fts3_write.c
@@ -1623,11 +1623,11 @@
 /*
 ** This is a comparison function used as a qsort() callback when sorting
 ** an array of pending terms by term. This occurs as part of flushing
 ** the contents of the pending-terms hash table to the database.
 */
-static int fts3CompareElemByTerm(const void *lhs, const void *rhs){
+static int SQLITE_CDECL fts3CompareElemByTerm(const void *lhs, const void *rhs){
   char *z1 = fts3HashKey(*(Fts3HashElem **)lhs);
   char *z2 = fts3HashKey(*(Fts3HashElem **)rhs);
   int n1 = fts3HashKeysize(*(Fts3HashElem **)lhs);
   int n2 = fts3HashKeysize(*(Fts3HashElem **)rhs);
 

Index: src/shell.c
==================================================================
--- src/shell.c
+++ src/shell.c
@@ -2104,11 +2104,11 @@
 **   +  Keep track of the line number in p->nLine.
 **   +  Store the character that terminates the field in p->cTerm.  Store
 **      EOF on end-of-file.
 **   +  Report syntax errors on stderr
 */
-static char *csv_read_one_field(ImportCtx *p){
+static char *SQLITE_CDECL csv_read_one_field(ImportCtx *p){
   int c;
   int cSep = p->cColSep;
   int rSep = p->cRowSep;
   p->n = 0;
   c = fgetc(p->in);
@@ -2178,11 +2178,11 @@
 **   +  Keep track of the row number in p->nLine.
 **   +  Store the character that terminates the field in p->cTerm.  Store
 **      EOF on end-of-file.
 **   +  Report syntax errors on stderr
 */
-static char *ascii_read_one_field(ImportCtx *p){
+static char *SQLITE_CDECL ascii_read_one_field(ImportCtx *p){
   int c;
   int cSep = p->cColSep;
   int rSep = p->cRowSep;
   p->n = 0;
   c = fgetc(p->in);
@@ -2757,12 +2757,12 @@
     int i, j;                   /* Loop counters */
     int needCommit;             /* True to COMMIT or ROLLBACK at end */
     int nSep;                   /* Number of bytes in p->colSeparator[] */
     char *zSql;                 /* An SQL statement */
     ImportCtx sCtx;             /* Reader context */
-    char *(*xRead)(ImportCtx*); /* Procedure to read one value */
-    int (*xCloser)(FILE*);      /* Procedure to close th3 connection */
+    char *(SQLITE_CDECL *xRead)(ImportCtx*); /* Func to read one value */
+    int (SQLITE_CDECL *xCloser)(FILE*);      /* Func to close file */
 
     if( nArg!=3 ){
       fprintf(stderr, "Usage: .import FILE TABLE\n");
       goto meta_command_exit;
     }
@@ -4176,11 +4176,11 @@
     exit(1);
   }
   return argv[i];
 }
 
-int main(int argc, char **argv){
+int SQLITE_CDECL main(int argc, char **argv){
   char *zErrMsg = 0;
   ShellState data;
   const char *zInitFile = 0;
   int i;
   int rc = 0;

Index: src/sqlite.h.in
==================================================================
--- src/sqlite.h.in
+++ src/sqlite.h.in
@@ -41,15 +41,24 @@
 extern "C" {
 #endif
 
 
 /*
-** Add the ability to override 'extern'
+** Provide the ability to override linkage features of the interface.
 */
 #ifndef SQLITE_EXTERN
 # define SQLITE_EXTERN extern
 #endif
+#ifndef SQLITE_API
+# define SQLITE_API
+#endif
+#ifndef SQLITE_CDECL
+# define SQLITE_CDECL
+#endif
+#ifndef SQLITE_STDCALL
+# define SQLITE_STDCALL
+#endif
 
 /*
 ** These no-op macros are used in front of interfaces to mark those
 ** interfaces as either deprecated or experimental.  New applications
 ** should not use deprecated interfaces - they are supported for backwards

Index: tool/build-all-msvc.bat
==================================================================
--- tool/build-all-msvc.bat
+++ tool/build-all-msvc.bat
@@ -56,10 +56,13 @@
 REM SET __ECHO3=ECHO
 IF NOT DEFINED _AECHO (SET _AECHO=REM)
 IF NOT DEFINED _CECHO (SET _CECHO=REM)
 IF NOT DEFINED _VECHO (SET _VECHO=REM)
 
+SET REDIRECT=^>
+IF DEFINED __ECHO SET REDIRECT=^^^>
+
 %_AECHO% Running %0 %*
 
 REM SET DFLAGS=/L
 
 %_VECHO% DFlags = '%DFLAGS%'
@@ -316,11 +319,22 @@
       REM       itself.
       REM
       %_AECHO% Building the %%B configuration for platform %%P with name %%D...
 
       IF /I "%%B" == "Debug" (
-        SET DEBUG=2
+        REM
+        REM NOTE: Using this level for the DEBUG environment variable should
+        REM       disable all compiler optimizations and prevent use of the
+        REM       NDEBUG define.  Additionally, both SQLITE_ENABLE_API_ARMOR
+        REM       and SQLITE_DEBUG defines should be enabled.
+        REM
+        SET DEBUG=3
+
+        REM
+        REM NOTE: Setting this to non-zero should enable the SQLITE_MEMDEBUG
+        REM       define.
+        REM
         SET MEMDEBUG=1
       ) ELSE (
         CALL :fn_UnsetVariable DEBUG
         CALL :fn_UnsetVariable MEMDEBUG
       )
@@ -418,15 +432,15 @@
             GOTO errors
           )
         ) ELSE (
           REM
           REM NOTE: Even when the cleaning step has been disabled, we still
-          REM       need to remove the build output for the files we are
+          REM       need to remove the build output for all the files we are
           REM       specifically wanting to build for each platform.
           REM
-          %_AECHO% Cleaning final output files only...
-          %__ECHO% DEL /Q *.lo sqlite3.dll sqlite3.lib sqlite3.pdb
+          %_AECHO% Cleaning final core library output files only...
+          %__ECHO% DEL /Q *.lo sqlite3.dll sqlite3.lib sqlite3.pdb 2%REDIRECT% NUL
         )
 
         REM
         REM NOTE: Call NMAKE with the MSVC makefile to build the "sqlite3.dll"
         REM       binary.  The x86 compiler will be used to compile the native
@@ -474,10 +488,68 @@
           IF ERRORLEVEL 1 (
             ECHO Failed to copy "sqlite3.pdb" to "%BINARYDIRECTORY%\%%B\%%D\".
             GOTO errors
           )
         )
+
+        REM
+        REM NOTE: If requested, also build the shell executable.
+        REM
+        IF DEFINED BUILD_ALL_SHELL (
+          REM
+          REM NOTE: If necessary, make sure any previous build output for the
+          REM       shell executable is deleted.
+          REM
+          IF DEFINED NOCLEAN (
+            REM
+            REM NOTE: Even when the cleaning step has been disabled, we still
+            REM       need to remove the build output for all the files we are
+            REM       specifically wanting to build for each platform.
+            REM
+            %_AECHO% Cleaning final shell executable output files only...
+            %__ECHO% DEL /Q sqlite3.exe sqlite3sh.pdb 2%REDIRECT% NUL
+          )
+
+          REM
+          REM NOTE: Call NMAKE with the MSVC makefile to build the "sqlite3.exe"
+          REM       binary.  The x86 compiler will be used to compile the native
+          REM       command line tools needed during the build process itself.
+          REM       Also, disable looking for and/or linking to the native Tcl
+          REM       runtime library.
+          REM
+          %__ECHO% %NMAKE_CMD% sqlite3.exe XCOMPILE=1 USE_NATIVE_LIBPATHS=1 NO_TCL=1 %NMAKE_ARGS%
+
+          IF ERRORLEVEL 1 (
+            ECHO Failed to build %%B "sqlite3.exe" for platform %%P.
+            GOTO errors
+          )
+
+          REM
+          REM NOTE: Copy the "sqlite3.exe" file to the appropriate directory
+          REM       for the build and platform beneath the binary directory.
+          REM
+          %__ECHO% XCOPY sqlite3.exe "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%
+
+          IF ERRORLEVEL 1 (
+            ECHO Failed to copy "sqlite3.exe" to "%BINARYDIRECTORY%\%%B\%%D\".
+            GOTO errors
+          )
+
+          REM
+          REM NOTE: Copy the "sqlite3sh.pdb" file to the appropriate directory
+          REM       for the build and platform beneath the binary directory
+          REM       unless we are prevented from doing so.
+          REM
+          IF NOT DEFINED NOSYMBOLS (
+            %__ECHO% XCOPY sqlite3sh.pdb "%BINARYDIRECTORY%\%%B\%%D\" %FFLAGS% %DFLAGS%
+
+            IF ERRORLEVEL 1 (
+              ECHO Failed to copy "sqlite3sh.pdb" to "%BINARYDIRECTORY%\%%B\%%D\".
+              GOTO errors
+            )
+          )
+        )
       )
     )
   )
 
   REM

Index: tool/mksqlite3c-noext.tcl
==================================================================
--- tool/mksqlite3c-noext.tcl
+++ tool/mksqlite3c-noext.tcl
@@ -15,17 +15,17 @@
 # "keywordhash.h" files is generated by a program named "mkkeywordhash".
 #
 # After the "tsrc" directory has been created and populated, run
 # this script:
 #
-#      tclsh mksqlite3c.tcl
+#      tclsh mksqlite3c-noext.tcl
 #
 # The amalgamated SQLite code will be written into sqlite3.c
 #
 
 # Begin by reading the "sqlite3.h" header file.  Extract the version number
-# from in this file.  The versioon number is needed to generate the header
+# from in this file.  The version number is needed to generate the header
 # comment of the amalgamation.
 #
 if {[lsearch $argv --nostatic]>=0} {
   set addstatic 0
 } else {
@@ -78,13 +78,10 @@
 #define SQLITE_AMALGAMATION 1}]
 if {$addstatic} {
   puts $out \
 {#ifndef SQLITE_PRIVATE
 # define SQLITE_PRIVATE static
-#endif
-#ifndef SQLITE_API
-# define SQLITE_API
 #endif}
 }
 
 # These are the header files used by SQLite.  The first time any of these 
 # files are seen in a #include statement in the C code, include the complete
@@ -112,14 +109,32 @@
    sqliteInt.h
    sqliteLimit.h
    vdbe.h
    vdbeInt.h
    wal.h
+   whereInt.h
 } {
   set available_hdr($hdr) 1
 }
 set available_hdr(sqliteInt.h) 0
+
+# These headers should be copied into the amalgamation without modifying any
+# of their function declarations or definitions.
+set varonly_hdr(sqlite3.h) 1
+
+# These are the functions that accept a variable number of arguments.  They
+# always need to use the "cdecl" calling convention even when another calling
+# convention (e.g. "stcall") is being used for the rest of the library.
+set cdecllist {
+  sqlite3_config
+  sqlite3_db_config
+  sqlite3_log
+  sqlite3_mprintf
+  sqlite3_snprintf
+  sqlite3_test_control
+  sqlite3_vtab_config
+}
 
 # 78 stars used for comment formatting.
 set s78 \
 {*****************************************************************************}
 
@@ -133,25 +148,25 @@
   puts $out "/************** $text $stars/"
 }
 
 # Read the source file named $filename and write it into the
 # sqlite3.c output file.  If any #include statements are seen,
-# process them approprately.
+# process them appropriately.
 #
 proc copy_file {filename} {
-  global seen_hdr available_hdr out addstatic linemacros
+  global seen_hdr available_hdr varonly_hdr cdecllist out addstatic linemacros
   set ln 0
   set tail [file tail $filename]
   section_comment "Begin file $tail"
   if {$linemacros} {puts $out "#line 1 \"$filename\""}
   set in [open $filename r]
   set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+(sqlite3[_a-zA-Z0-9]+)(\[|;| =)}
-  set declpattern {[a-zA-Z][a-zA-Z_0-9 ]+ \**(sqlite3[_a-zA-Z0-9]+)\(}
+  set declpattern {([a-zA-Z][a-zA-Z_0-9 ]+ \**)(sqlite3[_a-zA-Z0-9]+)(\(.*)}
   if {[file extension $filename]==".h"} {
     set declpattern " *$declpattern"
   }
-  set declpattern ^$declpattern
+  set declpattern ^$declpattern\$
   while {![eof $in]} {
     set line [gets $in]
     incr ln
     if {[regexp {^\s*#\s*include\s+["<]([^">]+)[">]} $line all hdr]} {
       if {[info exists available_hdr($hdr)]} {
@@ -163,46 +178,71 @@
           copy_file tsrc/$hdr
           section_comment "Continuing where we left off in $tail"
           if {$linemacros} {puts $out "#line [expr {$ln+1}] \"$filename\""}
         }
       } elseif {![info exists seen_hdr($hdr)]} {
-        set seen_hdr($hdr) 1
+        if {![regexp {/\*\s+amalgamator:\s+dontcache\s+\*/} $line]} {
+          set seen_hdr($hdr) 1
+        }
+        puts $out $line
+      } elseif {[regexp {/\*\s+amalgamator:\s+keep\s+\*/} $line]} {
+        # This include file must be kept because there was a "keep"
+        # directive inside of a line comment.
         puts $out $line
       } else {
-        puts $out "/* $line */"
+        # Comment out the entire line, replacing any nested comment
+        # begin/end markers with the harmless substring "**".
+        puts $out "/* [string map [list /* ** */ **] $line] */"
       }
     } elseif {[regexp {^#ifdef __cplusplus} $line]} {
       puts $out "#if 0"
     } elseif {!$linemacros && [regexp {^#line} $line]} {
       # Skip #line directives.
     } elseif {$addstatic && ![regexp {^(static|typedef)} $line]} {
-      regsub {^SQLITE_API } $line {} line
-      if {[regexp $declpattern $line all funcname]} {
+      # Skip adding the SQLITE_PRIVATE or SQLITE_API keyword before
+      # functions if this header file does not need it.
+      if {![info exists varonly_hdr($tail)]
+       && [regexp $declpattern $line all rettype funcname rest]} {
+        regsub {^SQLITE_API } $line {} line
         # Add the SQLITE_PRIVATE or SQLITE_API keyword before functions.
         # so that linkage can be modified at compile-time.
         if {[regexp {^sqlite3_} $funcname]} {
-          puts $out "SQLITE_API $line"
+          set line SQLITE_API
+          append line " " [string trim $rettype]
+          if {[string index $rettype end] ne "*"} {
+            append line " "
+          }
+          if {[lsearch -exact $cdecllist $funcname] >= 0} {
+            append line SQLITE_CDECL
+          } else {
+            append line SQLITE_STDCALL
+          }
+          append line " " $funcname $rest
+          puts $out $line
         } else {
           puts $out "SQLITE_PRIVATE $line"
         }
       } elseif {[regexp $varpattern $line all varname]} {
-        # Add the SQLITE_PRIVATE before variable declarations or
-        # definitions for internal use
-        if {![regexp {^sqlite3_} $varname]} {
-          regsub {^extern } $line {} line
-          puts $out "SQLITE_PRIVATE $line"
-        } else {
-          if {[regexp {const char sqlite3_version\[\];} $line]} {
-            set line {const char sqlite3_version[] = SQLITE_VERSION;}
-          }
-          regsub {^SQLITE_EXTERN } $line {} line
-          puts $out "SQLITE_API $line"
-        }
-      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {
-        regsub {^SQLITE_EXTERN } $line {} line
-        puts $out "SQLITE_PRIVATE $line"
-      } elseif {[regexp {^void \(\*sqlite3Os} $line]} {
+          # Add the SQLITE_PRIVATE before variable declarations or
+          # definitions for internal use
+          regsub {^SQLITE_API } $line {} line
+          if {![regexp {^sqlite3_} $varname]} {
+            regsub {^extern } $line {} line
+            puts $out "SQLITE_PRIVATE $line"
+          } else {
+            if {[regexp {const char sqlite3_version\[\];} $line]} {
+              set line {const char sqlite3_version[] = SQLITE_VERSION;}
+            }
+            regsub {^SQLITE_EXTERN } $line {} line
+            puts $out "SQLITE_API $line"
+          }
+      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {
+        regsub {^SQLITE_API } $line {} line
+        regsub {^SQLITE_EXTERN } $line {} line
+        puts $out $line
+      } elseif {[regexp {^void \(\*sqlite3Os} $line]} {
+        regsub {^SQLITE_API } $line {} line
         puts $out "SQLITE_PRIVATE $line"
       } else {
         puts $out $line
       }
     } else {

Index: tool/mksqlite3c.tcl
==================================================================
--- tool/mksqlite3c.tcl
+++ tool/mksqlite3c.tcl
@@ -78,13 +78,10 @@
 #define SQLITE_AMALGAMATION 1}]
 if {$addstatic} {
   puts $out \
 {#ifndef SQLITE_PRIVATE
 # define SQLITE_PRIVATE static
-#endif
-#ifndef SQLITE_API
-# define SQLITE_API
 #endif}
 }
 
 # These are the header files used by SQLite.  The first time any of these 
 # files are seen in a #include statement in the C code, include the complete
@@ -122,10 +119,27 @@
    whereInt.h
 } {
   set available_hdr($hdr) 1
 }
 set available_hdr(sqliteInt.h) 0
+
+# These headers should be copied into the amalgamation without modifying any
+# of their function declarations or definitions.
+set varonly_hdr(sqlite3.h) 1
+
+# These are the functions that accept a variable number of arguments.  They
+# always need to use the "cdecl" calling convention even when another calling
+# convention (e.g. "stcall") is being used for the rest of the library.
+set cdecllist {
+  sqlite3_config
+  sqlite3_db_config
+  sqlite3_log
+  sqlite3_mprintf
+  sqlite3_snprintf
+  sqlite3_test_control
+  sqlite3_vtab_config
+}
 
 # 78 stars used for comment formatting.
 set s78 \
 {*****************************************************************************}
 
@@ -142,22 +156,22 @@
 # Read the source file named $filename and write it into the
 # sqlite3.c output file.  If any #include statements are seen,
 # process them appropriately.
 #
 proc copy_file {filename} {
-  global seen_hdr available_hdr out addstatic linemacros
+  global seen_hdr available_hdr varonly_hdr cdecllist out addstatic linemacros
   set ln 0
   set tail [file tail $filename]
   section_comment "Begin file $tail"
   if {$linemacros} {puts $out "#line 1 \"$filename\""}
   set in [open $filename r]
   set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+(sqlite3[_a-zA-Z0-9]+)(\[|;| =)}
-  set declpattern {[a-zA-Z][a-zA-Z_0-9 ]+ \**(sqlite3[_a-zA-Z0-9]+)\(}
+  set declpattern {([a-zA-Z][a-zA-Z_0-9 ]+ \**)(sqlite3[_a-zA-Z0-9]+)(\(.*)}
   if {[file extension $filename]==".h"} {
     set declpattern " *$declpattern"
   }
-  set declpattern ^$declpattern
+  set declpattern ^$declpattern\$
   while {![eof $in]} {
     set line [gets $in]
     incr ln
     if {[regexp {^\s*#\s*include\s+["<]([^">]+)[">]} $line all hdr]} {
       if {[info exists available_hdr($hdr)]} {
@@ -187,36 +201,53 @@
     } elseif {[regexp {^#ifdef __cplusplus} $line]} {
       puts $out "#if 0"
     } elseif {!$linemacros && [regexp {^#line} $line]} {
       # Skip #line directives.
     } elseif {$addstatic && ![regexp {^(static|typedef)} $line]} {
-      regsub {^SQLITE_API } $line {} line
-      if {[regexp $declpattern $line all funcname]} {
+      # Skip adding the SQLITE_PRIVATE or SQLITE_API keyword before
+      # functions if this header file does not need it.
+      if {![info exists varonly_hdr($tail)]
+       && [regexp $declpattern $line all rettype funcname rest]} {
+        regsub {^SQLITE_API } $line {} line
         # Add the SQLITE_PRIVATE or SQLITE_API keyword before functions.
         # so that linkage can be modified at compile-time.
         if {[regexp {^sqlite3_} $funcname]} {
-          puts $out "SQLITE_API $line"
+          set line SQLITE_API
+          append line " " [string trim $rettype]
+          if {[string index $rettype end] ne "*"} {
+            append line " "
+          }
+          if {[lsearch -exact $cdecllist $funcname] >= 0} {
+            append line SQLITE_CDECL
+          } else {
+            append line SQLITE_STDCALL
+          }
+          append line " " $funcname $rest
+          puts $out $line
         } else {
           puts $out "SQLITE_PRIVATE $line"
         }
       } elseif {[regexp $varpattern $line all varname]} {
-        # Add the SQLITE_PRIVATE before variable declarations or
-        # definitions for internal use
-        if {![regexp {^sqlite3_} $varname]} {
-          regsub {^extern } $line {} line
-          puts $out "SQLITE_PRIVATE $line"
-        } else {
-          if {[regexp {const char sqlite3_version\[\];} $line]} {
-            set line {const char sqlite3_version[] = SQLITE_VERSION;}
-          }
-          regsub {^SQLITE_EXTERN } $line {} line
-          puts $out "SQLITE_API $line"
-        }
-      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {
+          # Add the SQLITE_PRIVATE before variable declarations or
+          # definitions for internal use
+          regsub {^SQLITE_API } $line {} line
+          if {![regexp {^sqlite3_} $varname]} {
+            regsub {^extern } $line {} line
+            puts $out "SQLITE_PRIVATE $line"
+          } else {
+            if {[regexp {const char sqlite3_version\[\];} $line]} {
+              set line {const char sqlite3_version[] = SQLITE_VERSION;}
+            }
+            regsub {^SQLITE_EXTERN } $line {} line
+            puts $out "SQLITE_API $line"
+          }
+      } elseif {[regexp {^(SQLITE_EXTERN )?void \(\*sqlite3IoTrace\)} $line]} {
+        regsub {^SQLITE_API } $line {} line
         regsub {^SQLITE_EXTERN } $line {} line
         puts $out $line
       } elseif {[regexp {^void \(\*sqlite3Os} $line]} {
+        regsub {^SQLITE_API } $line {} line
         puts $out "SQLITE_PRIVATE $line"
       } else {
         puts $out $line
       }
     } else {

Index: tool/mksqlite3h.tcl
==================================================================
--- tool/mksqlite3h.tcl
+++ tool/mksqlite3h.tcl
@@ -61,19 +61,32 @@
 close $in
 
 # Set up patterns for recognizing API declarations.
 #
 set varpattern {^[a-zA-Z][a-zA-Z_0-9 *]+sqlite3_[_a-zA-Z0-9]+(\[|;| =)}
-set declpattern {^ *[a-zA-Z][a-zA-Z_0-9 ]+ \**sqlite3_[_a-zA-Z0-9]+\(}
+set declpattern {^ *([a-zA-Z][a-zA-Z_0-9 ]+ \**)(sqlite3_[_a-zA-Z0-9]+)(\(.*)$}
 
 # Force the output to use unix line endings, even on Windows.
 fconfigure stdout -translation lf
 
 set filelist [subst {
   $TOP/src/sqlite.h.in
   $TOP/ext/rtree/sqlite3rtree.h
 }]
+
+# These are the functions that accept a variable number of arguments.  They
+# always need to use the "cdecl" calling convention even when another calling
+# convention (e.g. "stcall") is being used for the rest of the library.
+set cdecllist {
+  sqlite3_config
+  sqlite3_db_config
+  sqlite3_log
+  sqlite3_mprintf
+  sqlite3_snprintf
+  sqlite3_test_control
+  sqlite3_vtab_config
+}
 
 # Process the source files.
 #
 foreach file $filelist {
   set in [open $file]
@@ -87,25 +100,27 @@
     if {[string match {*#include*<sqlite3.h>*} $line]} continue
   
     regsub -- --VERS--           $line $zVersion line
     regsub -- --VERSION-NUMBER-- $line $nVersion line
     regsub -- --SOURCE-ID--      $line "$zDate $zUuid" line
-  
-    if {[regexp {define SQLITE_EXTERN extern} $line]} {
-      puts $line
-      puts [gets $in]
-      puts ""
-      puts "#ifndef SQLITE_API"
-      puts "# define SQLITE_API"
-      puts "#endif"
-      set line ""
-    }
-  
-    if {([regexp $varpattern $line] && ![regexp {^ *typedef} $line])
-     || ([regexp $declpattern $line])
-    } {
+
+    if {[regexp $varpattern $line] && ![regexp {^ *typedef} $line]} {
       set line "SQLITE_API $line"
+    } else {
+      if {[regexp $declpattern $line all rettype funcname rest]} {
+        set line SQLITE_API
+        append line " " [string trim $rettype]
+        if {[string index $rettype end] ne "*"} {
+          append line " "
+        }
+        if {[lsearch -exact $cdecllist $funcname] >= 0} {
+          append line SQLITE_CDECL
+        } else {
+          append line SQLITE_STDCALL
+        }
+        append line " " $funcname $rest
+      }
     }
     puts $line
   }
   close $in
 }