# 2009 January 30 # # The author disclaims copyright to this source code. In place of # a legal notice, here is a blessing: # # May you do good and not evil. # May you find forgiveness for yourself and forgive others. # May you share freely, never taking more than you give. # #*********************************************************************** # This file implements regression tests for SQLite library. The # focus of this file is testing the sqlite3_backup_XXX API. # # $Id: backup.test,v 1.11 2009/06/05 17:09:12 drh Exp $ set testdir [file dirname $argv0] source $testdir/tester.tcl do_not_use_codec #--------------------------------------------------------------------- # Test organization: # # backup-1.*: Warm-body tests. # # backup-2.*: Test backup under various conditions. To and from in-memory # databases. To and from empty/populated databases. etc. # # backup-3.*: Verify that the locking-page (pending byte page) is handled. # # backup-4.*: Test various error conditions. # # backup-5.*: Test the source database being modified during a backup. # # backup-6.*: Test the backup_remaining() and backup_pagecount() APIs. # # backup-7.*: Test SQLITE_BUSY and SQLITE_LOCKED errors. # # backup-8.*: Test multiple simultaneous backup operations. # # backup-9.*: Test that passing a negative argument to backup_step() is # interpreted as "copy the whole file". # # backup-10.*: Test writing the source database mid backup. # proc data_checksum {db file} { $db one "SELECT md5sum(a, b) FROM ${file}.t1" } proc test_contents {name db1 file1 db2 file2} { $db2 eval {select * from sqlite_master} $db1 eval {select * from sqlite_master} set checksum [data_checksum $db2 $file2] uplevel [list do_test $name [list data_checksum $db1 $file1] $checksum] } do_test backup-1.1 { execsql { BEGIN; CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 VALUES(2, randstr(1000,1000)); INSERT INTO t1 VALUES(3, randstr(1000,1000)); INSERT INTO t1 VALUES(4, randstr(1000,1000)); INSERT INTO t1 VALUES(5, randstr(1000,1000)); COMMIT; } } {} # Sanity check to verify that the [test_contents] proc works. # test_contents backup-1.2 db main db main # Check that it is possible to create and finish backup operations. # do_test backup-1.3.1 { delete_file test2.db sqlite3 db2 test2.db sqlite3_backup B db2 main db main } {B} do_test backup-1.3.2 { B finish } {SQLITE_OK} do_test backup-1.3.3 { info commands B } {} # Simplest backup operation. Backup test.db to test2.db. test2.db is # initially empty. test.db uses the default page size. # do_test backup-1.4.1 { sqlite3_backup B db2 main db main } {B} do_test backup-1.4.2 { B step 200 } {SQLITE_DONE} do_test backup-1.4.3 { B finish } {SQLITE_OK} do_test backup-1.4.4 { info commands B } {} test_contents backup-1.4.5 db2 main db main db close db2 close # # End of backup-1.* tests. #--------------------------------------------------------------------- #--------------------------------------------------------------------- # The following tests, backup-2.*, are based on the following procedure: # # 1) Populate the source database. # 2) Populate the destination database. # 3) Run the backup to completion. (backup-2.*.1) # 4) Integrity check the destination db. (backup-2.*.2) # 5) Check that the contents of the destination db is the same as that # of the source db. (backup-2.*.3) # # The test is run with all possible combinations of the following # input parameters, except that if the destination is an in-memory # database, the only page size tested is 1024 bytes (the same as the # source page-size). # # * Source database is an in-memory database, OR # * Source database is a file-backed database. # # * Target database is an in-memory database, OR # * Target database is a file-backed database. # # * Destination database is a main file, OR # * Destination database is an attached file, OR # * Destination database is a temp database. # # * Target database is empty (zero bytes), OR # * Target database is larger than the source, OR # * Target database is smaller than the source. # # * Target database page-size is the same as the source, OR # * Target database page-size is larger than the source, OR # * Target database page-size is smaller than the source. # # * Each call to step copies a single page, OR # * A single call to step copies the entire source database. # set iTest 1 foreach zSrcFile {test.db :memory:} { foreach zDestFile {test2.db :memory:} { foreach zOpenScript [list { sqlite3 db $zSrcFile sqlite3 db2 $zSrcFile db2 eval "ATTACH '$zDestFile' AS bak" set db_dest db2 set file_dest bak } { sqlite3 db $zSrcFile sqlite3 db2 $zDestFile set db_dest db2 set file_dest main } { sqlite3 db $zSrcFile sqlite3 db2 $zDestFile set db_dest db2 set file_dest temp }] { foreach rows_dest {0 3 10} { foreach pgsz_dest {512 1024 2048 4096} { foreach nPagePerStep {1 200} { # Open the databases. catch { delete_file test.db } catch { delete_file test2.db } eval $zOpenScript # Set to true if copying to an in-memory destination. Copying to an # in-memory destination is only possible if the initial destination # page size is the same as the source page size (in this case 1024 bytes). # set isMemDest [expr { $zDestFile eq ":memory:" || $file_dest eq "temp" }] if 0 { puts -nonewline "Test $iTest: src=$zSrcFile dest=$zDestFile" puts -nonewline " (as $db_dest.$file_dest)" puts -nonewline " rows_dest=$rows_dest pgsz_dest=$pgsz_dest" puts "" } if { $isMemDest==0 || $pgsz_dest==1024 || $rows_dest==0 } { # Set up the content of the source database. execsql { PRAGMA page_size = 1024; BEGIN; CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 VALUES(2, randstr(1000,1000)); INSERT INTO t1 VALUES(3, randstr(1000,1000)); INSERT INTO t1 VALUES(4, randstr(1000,1000)); INSERT INTO t1 VALUES(5, randstr(1000,1000)); COMMIT; } # Set up the content of the target database. execsql "PRAGMA ${file_dest}.page_size = ${pgsz_dest}" $db_dest if {$rows_dest != 0} { execsql " BEGIN; CREATE TABLE ${file_dest}.t1(a, b); CREATE INDEX ${file_dest}.i1 ON t1(a, b); " $db_dest for {set ii 0} {$ii < $rows_dest} {incr ii} { execsql " INSERT INTO ${file_dest}.t1 VALUES(1, randstr(1000,1000)) " $db_dest } execsql COMMIT $db_dest } # Backup the source database. do_test backup-2.$iTest.1 { sqlite3_backup B $db_dest $file_dest db main while {[B step $nPagePerStep]=="SQLITE_OK"} {} B finish } {SQLITE_OK} # Run integrity check on the backup. do_test backup-2.$iTest.2 { execsql "PRAGMA ${file_dest}.integrity_check" $db_dest } {ok} test_contents backup-2.$iTest.3 db main $db_dest $file_dest } db close catch {db2 close} incr iTest } } } } } } # # End of backup-2.* tests. #--------------------------------------------------------------------- #--------------------------------------------------------------------- # These tests, backup-3.*, ensure that nothing goes wrong if either # the source or destination database are large enough to include the # the locking-page (the page that contains the range of bytes that # the locks are applied to). These tests assume that the pending # byte is at offset 0x00010000 (64KB offset), as set by tester.tcl, # not at the 1GB offset as it usually is. # # The test procedure is as follows (same procedure as used for # the backup-2.* tests): # # 1) Populate the source database. # 2) Populate the destination database. # 3) Run the backup to completion. (backup-3.*.1) # 4) Integrity check the destination db. (backup-3.*.2) # 5) Check that the contents of the destination db is the same as that # of the source db. (backup-3.*.3) # # The test procedure is run with the following parameters varied: # # * Source database includes pending-byte page. # * Source database does not include pending-byte page. # # * Target database includes pending-byte page. # * Target database does not include pending-byte page. # # * Target database page-size is the same as the source, OR # * Target database page-size is larger than the source, OR # * Target database page-size is smaller than the source. # set iTest 1 foreach nSrcPg {10 64 65 66 100} { foreach nDestRow {10 100} { foreach nDestPgsz {512 1024 2048 4096} { catch { delete_file test.db } catch { delete_file test2.db } sqlite3 db test.db sqlite3 db2 test2.db # Set up the content of the two databases. # execsql { PRAGMA page_size = 1024 } execsql "PRAGMA page_size = $nDestPgsz" db2 foreach db {db db2} { execsql { BEGIN; CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); COMMIT; } $db } while {[file size test.db]/1024 < $nSrcPg} { execsql { INSERT INTO t1 VALUES($ii, randstr(200,200)) } } for {set ii 0} {$ii < $nDestRow} {incr ii} { execsql { INSERT INTO t1 VALUES($ii, randstr(1000,1000)) } db2 } # Backup the source database. do_test backup-3.$iTest.1 { sqlite3_backup B db main db2 main while {[B step 10]=="SQLITE_OK"} {} B finish } {SQLITE_OK} # Run integrity check on the backup. do_test backup-3.$iTest.2 { execsql "PRAGMA integrity_check" db2 } {ok} test_contents backup-3.$iTest.3 db main db2 main db close db2 close incr iTest } } } #-------------------------------------------------------------------- do_test backup-3.$iTest.1 { catch { forcedelete test.db } catch { forcedelete test2.db } sqlite3 db test.db set iTab 1 db eval { PRAGMA page_size = 512 } while {[file size test.db] <= $::sqlite_pending_byte} { db eval "CREATE TABLE t${iTab}(a, b, c)" incr iTab } sqlite3 db2 test2.db db2 eval { PRAGMA page_size = 4096 } while {[file size test2.db] < $::sqlite_pending_byte} { db2 eval "CREATE TABLE t${iTab}(a, b, c)" incr iTab } sqlite3_backup B db2 main db main B step -1 } {SQLITE_DONE} do_test backup-3.$iTest.2 { B finish } {SQLITE_OK} # # End of backup-3.* tests. #--------------------------------------------------------------------- #--------------------------------------------------------------------- # The following tests, backup-4.*, test various error conditions: # # backup-4.1.*: Test invalid database names. # # backup-4.2.*: Test that the source database cannot be detached while # a backup is in progress. # # backup-4.3.*: Test that the source database handle cannot be closed # while a backup is in progress. # # backup-4.4.*: Test an attempt to specify the same handle for the # source and destination databases. # # backup-4.5.*: Test that an in-memory destination with a different # page-size to the source database is an error. # sqlite3 db test.db sqlite3 db2 test2.db do_test backup-4.1.1 { catch { sqlite3_backup B db aux db2 main } } {1} do_test backup-4.1.2 { sqlite3_errmsg db } {unknown database aux} do_test backup-4.1.3 { catch { sqlite3_backup B db main db2 aux } } {1} do_test backup-4.1.4 { sqlite3_errmsg db } {unknown database aux} do_test backup-4.2.1 { catch { forcedelete test3.db } catch { forcedelete test4.db } execsql { ATTACH 'test3.db' AS aux1; CREATE TABLE aux1.t1(a, b); } execsql { ATTACH 'test4.db' AS aux2; CREATE TABLE aux2.t2(a, b); } db2 sqlite3_backup B db aux1 db2 aux2 } {B} do_test backup-4.2.2 { catchsql { DETACH aux2 } db2 } {1 {database aux2 is locked}} do_test backup-4.2.3 { B step 50 } {SQLITE_DONE} do_test backup-4.2.4 { B finish } {SQLITE_OK} do_test backup-4.3.1 { sqlite3_backup B db aux1 db2 aux2 } {B} do_test backup-4.3.2 { db2 cache flush sqlite3_close db2 } {SQLITE_BUSY} do_test backup-4.3.3 { sqlite3_errmsg db2 } {unable to close due to unfinalized statements or unfinished backups} do_test backup-4.3.4 { B step 50 } {SQLITE_DONE} do_test backup-4.3.5 { B finish } {SQLITE_OK} do_test backup-4.4.1 { set rc [catch {sqlite3_backup B db main db aux1}] list $rc [sqlite3_errcode db] [sqlite3_errmsg db] } {1 SQLITE_ERROR {source and destination must be distinct}} db close db2 close do_test backup-4.5.1 { catch { forcedelete test.db } sqlite3 db test.db sqlite3 db2 :memory: execsql { CREATE TABLE t1(a, b); INSERT INTO t1 VALUES(1, 2); } execsql { PRAGMA page_size = 4096; CREATE TABLE t2(a, b); INSERT INTO t2 VALUES(3, 4); } db2 sqlite3_backup B db2 main db main } {B} do_test backup-4.5.2 { B step 5000 } {SQLITE_READONLY} do_test backup-4.5.3 { B finish } {SQLITE_READONLY} db close db2 close # # End of backup-4.* tests. #--------------------------------------------------------------------- #--------------------------------------------------------------------- # The following tests, backup-5.*, test that the backup works properly # when the source database is modified during the backup. Test cases # are organized as follows: # # backup-5.x.1.*: Nothing special. Modify the database mid-backup. # # backup-5.x.2.*: Modify the database mid-backup so that one or more # pages are written out due to cache stress. Then # rollback the transaction. # # backup-5.x.3.*: Database is vacuumed. # # backup-5.x.4.*: Database is vacuumed and the page-size modified. # # backup-5.x.5.*: Database is shrunk via incr-vacuum. # # Each test is run three times, in the following configurations: # # 1) Backing up file-to-file. The writer writes via an external pager. # 2) Backing up file-to-file. The writer writes via the same pager as # is used by the backup operation. # 3) Backing up memory-to-file. # set iTest 0 forcedelete bak.db-wal foreach {writer file} {db test.db db3 test.db db :memory:} { incr iTest catch { delete_file bak.db } sqlite3 db2 bak.db catch { delete_file $file } sqlite3 db $file sqlite3 db3 $file do_test backup-5.$iTest.1.1 { execsql { BEGIN; CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 VALUES(2, randstr(1000,1000)); INSERT INTO t1 VALUES(3, randstr(1000,1000)); INSERT INTO t1 VALUES(4, randstr(1000,1000)); INSERT INTO t1 VALUES(5, randstr(1000,1000)); COMMIT; } expr {[execsql {PRAGMA page_count}] > 10} } {1} do_test backup-5.$iTest.1.2 { sqlite3_backup B db2 main db main B step 5 } {SQLITE_OK} do_test backup-5.$iTest.1.3 { execsql { UPDATE t1 SET a = a + 1 } $writer B step 50 } {SQLITE_DONE} do_test backup-5.$iTest.1.4 { B finish } {SQLITE_OK} integrity_check backup-5.$iTest.1.5 db2 test_contents backup-5.$iTest.1.6 db main db2 main do_test backup-5.$iTest.2.1 { execsql { PRAGMA cache_size = 10; BEGIN; INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1; COMMIT; } } {} do_test backup-5.$iTest.2.2 { sqlite3_backup B db2 main db main B step 50 } {SQLITE_OK} do_test backup-5.$iTest.2.3 { execsql { BEGIN; UPDATE t1 SET a = a + 1; ROLLBACK; } $writer B step 5000 } {SQLITE_DONE} do_test backup-5.$iTest.2.4 { B finish } {SQLITE_OK} integrity_check backup-5.$iTest.2.5 db2 test_contents backup-5.$iTest.2.6 db main db2 main do_test backup-5.$iTest.3.1 { execsql { UPDATE t1 SET b = randstr(1000,1000) } } {} do_test backup-5.$iTest.3.2 { sqlite3_backup B db2 main db main B step 50 } {SQLITE_OK} do_test backup-5.$iTest.3.3 { execsql { VACUUM } $writer B step 5000 } {SQLITE_DONE} do_test backup-5.$iTest.3.4 { B finish } {SQLITE_OK} integrity_check backup-5.$iTest.3.5 db2 test_contents backup-5.$iTest.3.6 db main db2 main do_test backup-5.$iTest.4.1 { execsql { UPDATE t1 SET b = randstr(1000,1000) } } {} do_test backup-5.$iTest.4.2 { sqlite3_backup B db2 main db main B step 50 } {SQLITE_OK} do_test backup-5.$iTest.4.3 { execsql { PRAGMA page_size = 2048; VACUUM; } $writer B step 5000 } {SQLITE_DONE} do_test backup-5.$iTest.4.4 { B finish } {SQLITE_OK} integrity_check backup-5.$iTest.4.5 db2 test_contents backup-5.$iTest.4.6 db main db2 main catch {db close} catch {db2 close} catch {db3 close} catch { delete_file bak.db } sqlite3 db2 bak.db catch { delete_file $file } sqlite3 db $file sqlite3 db3 $file do_test backup-5.$iTest.5.1 { execsql { PRAGMA auto_vacuum = incremental; BEGIN; CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 VALUES(2, randstr(1000,1000)); INSERT INTO t1 VALUES(3, randstr(1000,1000)); INSERT INTO t1 VALUES(4, randstr(1000,1000)); INSERT INTO t1 VALUES(5, randstr(1000,1000)); COMMIT; } } {} do_test backup-5.$iTest.5.2 { sqlite3_backup B db2 main db main B step 8 } {SQLITE_OK} do_test backup-5.$iTest.5.3 { execsql { DELETE FROM t1; PRAGMA incremental_vacuum; } $writer B step 50 } {SQLITE_DONE} do_test backup-5.$iTest.5.4 { B finish } {SQLITE_OK} integrity_check backup-5.$iTest.5.5 db2 test_contents backup-5.$iTest.5.6 db main db2 main catch {db close} catch {db2 close} catch {db3 close} } # # End of backup-5.* tests. #--------------------------------------------------------------------- #--------------------------------------------------------------------- # Test the sqlite3_backup_remaining() and backup_pagecount() APIs. # do_test backup-6.1 { catch { forcedelete test.db } catch { forcedelete test2.db } sqlite3 db test.db sqlite3 db2 test2.db execsql { BEGIN; CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 VALUES(2, randstr(1000,1000)); INSERT INTO t1 VALUES(3, randstr(1000,1000)); INSERT INTO t1 VALUES(4, randstr(1000,1000)); INSERT INTO t1 VALUES(5, randstr(1000,1000)); COMMIT; } } {} do_test backup-6.2 { set nTotal [expr {[file size test.db]/1024}] sqlite3_backup B db2 main db main B step 1 } {SQLITE_OK} do_test backup-6.3 { B pagecount } $nTotal do_test backup-6.4 { B remaining } [expr $nTotal-1] do_test backup-6.5 { B step 5 list [B remaining] [B pagecount] } [list [expr $nTotal-6] $nTotal] do_test backup-6.6 { execsql { CREATE TABLE t2(a PRIMARY KEY, b) } B step 1 list [B remaining] [B pagecount] } [list [expr $nTotal-5] [expr $nTotal+2]] do_test backup-6.X { B finish } {SQLITE_OK} catch {db close} catch {db2 close} #--------------------------------------------------------------------- # Test cases backup-7.* test that SQLITE_BUSY and SQLITE_LOCKED errors # are returned correctly: # # backup-7.1.*: Source database is externally locked (return SQLITE_BUSY). # # backup-7.2.*: Attempt to step the backup process while a # write-transaction is underway on the source pager (return # SQLITE_LOCKED). # # backup-7.3.*: Destination database is externally locked (return SQLITE_BUSY). # do_test backup-7.0 { catch { forcedelete test.db } catch { forcedelete test2.db } sqlite3 db2 test2.db sqlite3 db test.db execsql { CREATE TABLE t1(a, b); CREATE INDEX i1 ON t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 SELECT a+ 1, randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT a+ 2, randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT a+ 4, randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT a+ 8, randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT a+16, randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT a+32, randstr(1000,1000) FROM t1; INSERT INTO t1 SELECT a+64, randstr(1000,1000) FROM t1; } } {} do_test backup-7.1.1 { sqlite3_backup B db2 main db main B step 5 } {SQLITE_OK} do_test backup-7.1.2 { sqlite3 db3 test.db execsql { BEGIN EXCLUSIVE } db3 B step 5 } {SQLITE_BUSY} do_test backup-7.1.3 { execsql { ROLLBACK } db3 B step 5 } {SQLITE_OK} do_test backup-7.2.1 { execsql { BEGIN; INSERT INTO t1 VALUES(1, 4); } } {} do_test backup-7.2.2 { B step 5000 } {SQLITE_BUSY} do_test backup-7.2.3 { execsql { ROLLBACK } B step 5000 } {SQLITE_DONE} do_test backup-7.2.4 { B finish } {SQLITE_OK} test_contents backup-7.2.5 db main db2 main integrity_check backup-7.3.6 db2 do_test backup-7.3.1 { db2 close db3 close forcedelete test2.db sqlite3 db2 test2.db sqlite3 db3 test2.db sqlite3_backup B db2 main db main execsql { BEGIN ; CREATE TABLE t2(a, b); } db3 B step 5 } {SQLITE_BUSY} do_test backup-7.3.2 { execsql { COMMIT } db3 B step 5000 } {SQLITE_DONE} do_test backup-7.3.3 { B finish } {SQLITE_OK} test_contents backup-7.3.4 db main db2 main integrity_check backup-7.3.5 db2 catch { db2 close } catch { db3 close } #----------------------------------------------------------------------- # The following tests, backup-8.*, test attaching multiple backup # processes to the same source database. Also, reading from the source # database while a read transaction is active. # # These tests reuse the database "test.db" left over from backup-7.*. # do_test backup-8.1 { catch { forcedelete test2.db } catch { forcedelete test3.db } sqlite3 db2 test2.db sqlite3 db3 test3.db sqlite3_backup B2 db2 main db main sqlite3_backup B3 db3 main db main list [B2 finish] [B3 finish] } {SQLITE_OK SQLITE_OK} do_test backup-8.2 { sqlite3_backup B3 db3 main db main sqlite3_backup B2 db2 main db main list [B2 finish] [B3 finish] } {SQLITE_OK SQLITE_OK} do_test backup-8.3 { sqlite3_backup B2 db2 main db main sqlite3_backup B3 db3 main db main B2 step 5 } {SQLITE_OK} do_test backup-8.4 { execsql { BEGIN; SELECT * FROM sqlite_master; } B3 step 5 } {SQLITE_OK} do_test backup-8.5 { list [B3 step 5000] [B3 finish] } {SQLITE_DONE SQLITE_OK} do_test backup-8.6 { list [B2 step 5000] [B2 finish] } {SQLITE_DONE SQLITE_OK} test_contents backup-8.7 db main db2 main test_contents backup-8.8 db main db3 main do_test backup-8.9 { execsql { PRAGMA lock_status } } {main shared temp closed} do_test backup-8.10 { execsql COMMIT } {} catch { db2 close } catch { db3 close } #----------------------------------------------------------------------- # The following tests, backup-9.*, test that: # # * Passing 0 as an argument to sqlite3_backup_step() means no pages # are backed up (backup-9.1.*), and # * Passing a negative value as an argument to sqlite3_backup_step() means # all pages are backed up (backup-9.2.*). # # These tests reuse the database "test.db" left over from backup-7.*. # do_test backup-9.1.1 { sqlite3 db2 test2.db sqlite3_backup B db2 main db main B step 1 } {SQLITE_OK} do_test backup-9.1.2 { set nRemaining [B remaining] expr {$nRemaining>100} } {1} do_test backup-9.1.3 { B step 0 } {SQLITE_OK} do_test backup-9.1.4 { B remaining } $nRemaining do_test backup-9.2.1 { B step -1 } {SQLITE_DONE} do_test backup-9.2.2 { B remaining } {0} do_test backup-9.2.3 { B finish } {SQLITE_OK} catch {db2 close} ifcapable memorymanage { db close forcedelete test.db forcedelete bak.db sqlite3 db test.db sqlite3 db2 test.db sqlite3 db3 bak.db do_test backup-10.1.1 { execsql { BEGIN; CREATE TABLE t1(a, b); INSERT INTO t1 VALUES(1, randstr(1000,1000)); INSERT INTO t1 VALUES(2, randstr(1000,1000)); INSERT INTO t1 VALUES(3, randstr(1000,1000)); INSERT INTO t1 VALUES(4, randstr(1000,1000)); INSERT INTO t1 VALUES(5, randstr(1000,1000)); CREATE INDEX i1 ON t1(a, b); COMMIT; } } {} do_test backup-10.1.2 { sqlite3_backup B db3 main db2 main B step 5 } {SQLITE_OK} do_test backup-10.1.3 { execsql { UPDATE t1 SET b = randstr(500,500); } } {} sqlite3_release_memory [expr 1024*1024] do_test backup-10.1.3 { B step 50 } {SQLITE_DONE} do_test backup-10.1.4 { B finish } {SQLITE_OK} do_test backup-10.1.5 { execsql { PRAGMA integrity_check } db3 } {ok} db2 close db3 close } #----------------------------------------------------------------------- # Test that if the database is written to via the same database handle being # used as the source by a backup operation: # # 10.1.*: If the db is in-memory, the backup is restarted. # 10.2.*: If the db is a file, the backup is not restarted. # db close forcedelete test.db test.db-journal foreach {tn file rc} { 1 test.db SQLITE_DONE 2 :memory: SQLITE_OK } { do_test backup-10.$tn.1 { sqlite3 db $file execsql { CREATE TABLE t1(a INTEGER PRIMARY KEY, b BLOB); BEGIN; INSERT INTO t1 VALUES(NULL, randomblob(200)); INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1; COMMIT; SELECT count(*) FROM t1; } } {256} do_test backup-10.$tn.2 { set pgs [execsql {pragma page_count}] expr {$pgs > 50 && $pgs < 75} } {1} do_test backup-10.$tn.3 { forcedelete bak.db bak.db-journal sqlite3 db2 bak.db sqlite3_backup B db2 main db main B step 50 } {SQLITE_OK} do_test backup-10.$tn.4 { execsql { UPDATE t1 SET b = randomblob(200) WHERE a IN (1, 250) } } {} do_test backup-10.$tn.5 { B step 50 } $rc do_test backup-10.$tn.6 { B finish } {SQLITE_OK} db2 close } finish_test