/*
** The "printf" code that follows dates from the 1980's.  It is in
** the public domain. 
**
**************************************************************************
**
** This file contains code for a set of "printf"-like routines.  These
** routines format strings much like the printf() from the standard C
** library, though the implementation here has enhancements to support
** SQLite.
*/
#include "sqliteInt.h"

/*
** Conversion types fall into various categories as defined by the
** following enumeration.
*/
#define etRADIX       0 /* non-decimal integer types.  %x %o */
#define etFLOAT       1 /* Floating point.  %f */
#define etEXP         2 /* Exponentional notation. %e and %E */
#define etGENERIC     3 /* Floating or exponential, depending on exponent. %g */
#define etSIZE        4 /* Return number of characters processed so far. %n */
#define etSTRING      5 /* Strings. %s */
#define etDYNSTRING   6 /* Dynamically allocated strings. %z */
#define etPERCENT     7 /* Percent symbol. %% */
#define etCHARX       8 /* Characters. %c */
/* The rest are extensions, not normally found in printf() */
#define etSQLESCAPE   9 /* Strings with '\'' doubled.  %q */
#define etSQLESCAPE2 10 /* Strings with '\'' doubled and enclosed in '',
                          NULL pointers replaced by SQL NULL.  %Q */
#define etTOKEN      11 /* a pointer to a Token structure */
#define etSRCITEM    12 /* a pointer to a SrcItem */
#define etPOINTER    13 /* The %p conversion */
#define etSQLESCAPE3 14 /* %w -> Strings with '\"' doubled */
#define etORDINAL    15 /* %r -> 1st, 2nd, 3rd, 4th, etc.  English only */
#define etDECIMAL    16 /* %d or %u, but not %x, %o */

#define etINVALID    17 /* Any unrecognized conversion type */


/*
** An "etByte" is an 8-bit unsigned value.
*/
typedef unsigned char etByte;

/*
** Each builtin conversion character (ex: the 'd' in "%d") is described
** by an instance of the following structure
*/
typedef struct et_info {   /* Information about each format field */
  char fmttype;            /* The format field code letter */
  etByte base;             /* The base for radix conversion */
  etByte flags;            /* One or more of FLAG_ constants below */
  etByte type;             /* Conversion paradigm */
  etByte charset;          /* Offset into aDigits[] of the digits string */
  etByte prefix;           /* Offset into aPrefix[] of the prefix string */
} et_info;

/*
** Allowed values for et_info.flags
*/
#define FLAG_SIGNED    1     /* True if the value to convert is signed */
#define FLAG_STRING    4     /* Allow infinite precision */


/*
** The following table is searched linearly, so it is good to put the
** most frequently used conversion types first.
*/
static const char aDigits[] = "0123456789ABCDEF0123456789abcdef";
static const char aPrefix[] = "-x0\000X0";
static const et_info fmtinfo[] = {
  {  'd', 10, 1, etDECIMAL,    0,  0 },
  {  's',  0, 4, etSTRING,     0,  0 },
  {  'g',  0, 1, etGENERIC,    30, 0 },
  {  'z',  0, 4, etDYNSTRING,  0,  0 },
  {  'q',  0, 4, etSQLESCAPE,  0,  0 },
  {  'Q',  0, 4, etSQLESCAPE2, 0,  0 },
  {  'w',  0, 4, etSQLESCAPE3, 0,  0 },
  {  'c',  0, 0, etCHARX,      0,  0 },
  {  'o',  8, 0, etRADIX,      0,  2 },
  {  'u', 10, 0, etDECIMAL,    0,  0 },
  {  'x', 16, 0, etRADIX,      16, 1 },
  {  'X', 16, 0, etRADIX,      0,  4 },
#ifndef SQLITE_OMIT_FLOATING_POINT
  {  'f',  0, 1, etFLOAT,      0,  0 },
  {  'e',  0, 1, etEXP,        30, 0 },
  {  'E',  0, 1, etEXP,        14, 0 },
  {  'G',  0, 1, etGENERIC,    14, 0 },
#endif
  {  'i', 10, 1, etDECIMAL,    0,  0 },
  {  'n',  0, 0, etSIZE,       0,  0 },
  {  '%',  0, 0, etPERCENT,    0,  0 },
  {  'p', 16, 0, etPOINTER,    0,  1 },

  /* All the rest are undocumented and are for internal use only */
  {  'T',  0, 0, etTOKEN,      0,  0 },
  {  'S',  0, 0, etSRCITEM,    0,  0 },
  {  'r', 10, 1, etORDINAL,    0,  0 },
};

/* Notes:
**
**    %S    Takes a pointer to SrcItem.  Shows name or database.name
**    %!S   Like %S but prefer the zName over the zAlias
*/

/* Floating point constants used for rounding */
static const double arRound[] = {
  5.0e-01, 5.0e-02, 5.0e-03, 5.0e-04, 5.0e-05,
  5.0e-06, 5.0e-07, 5.0e-08, 5.0e-09, 5.0e-10,
};

/*
** If SQLITE_OMIT_FLOATING_POINT is defined, then none of the floating point
** conversions will work.
*/
#ifndef SQLITE_OMIT_FLOATING_POINT
/*
** "*val" is a double such that 0.1 <= *val < 10.0
** Return the ascii code for the leading digit of *val, then
** multiply "*val" by 10.0 to renormalize.
**
** Example:
**     input:     *val = 3.14159
**     output:    *val = 1.4159    function return = '3'
**
** The counter *cnt is incremented each time.  After counter exceeds
** 16 (the number of significant digits in a 64-bit float) '0' is
** always returned.
*/
static char et_getdigit(LONGDOUBLE_TYPE *val, int *cnt){
  int digit;
  LONGDOUBLE_TYPE d;
  if( (*cnt)<=0 ) return '0';
  (*cnt)--;
  digit = (int)*val;
  d = digit;
  digit += '0';
  *val = (*val - d)*10.0;
  return (char)digit;
}
#endif /* SQLITE_OMIT_FLOATING_POINT */

/*
** Set the StrAccum object to an error mode.
*/
void sqlite3StrAccumSetError(StrAccum *p, u8 eError){
  assert( eError==SQLITE_NOMEM || eError==SQLITE_TOOBIG );
  p->accError = eError;
  if( p->mxAlloc ) sqlite3_str_reset(p);
  if( eError==SQLITE_TOOBIG ) sqlite3ErrorToParser(p->db, eError);
}

/*
** Extra argument values from a PrintfArguments object
*/
static sqlite3_int64 getIntArg(PrintfArguments *p){
  if( p->nArg<=p->nUsed ) return 0;
  return sqlite3_value_int64(p->apArg[p->nUsed++]);
}
static double getDoubleArg(PrintfArguments *p){
  if( p->nArg<=p->nUsed ) return 0.0;
  return sqlite3_value_double(p->apArg[p->nUsed++]);
}
static char *getTextArg(PrintfArguments *p){
  if( p->nArg<=p->nUsed ) return 0;
  return (char*)sqlite3_value_text(p->apArg[p->nUsed++]);
}

/*
** Allocate memory for a temporary buffer needed for printf rendering.
**
** If the requested size of the temp buffer is larger than the size
** of the output buffer in pAccum, then cause an SQLITE_TOOBIG error.
** Do the size check before the memory allocation to prevent rogue
** SQL from requesting large allocations using the precision or width
** field of the printf() function.
*/
static char *printfTempBuf(sqlite3_str *pAccum, sqlite3_int64 n){
  char *z;
  if( pAccum->accError ) return 0;
  if( n>pAccum->nAlloc && n>pAccum->mxAlloc ){
    sqlite3StrAccumSetError(pAccum, SQLITE_TOOBIG);
    return 0;
  }
  z = sqlite3DbMallocRaw(pAccum->db, n);
  if( z==0 ){
    sqlite3StrAccumSetError(pAccum, SQLITE_NOMEM);
  }
  return z;
}

/*
** On machines with a small stack size, you can redefine the
** SQLITE_PRINT_BUF_SIZE to be something smaller, if desired.
*/
#ifndef SQLITE_PRINT_BUF_SIZE
# define SQLITE_PRINT_BUF_SIZE 70
#endif
#define etBUFSIZE SQLITE_PRINT_BUF_SIZE  /* Size of the output buffer */

/*
** Hard limit on the precision of floating-point conversions.
*/
#ifndef SQLITE_PRINTF_PRECISION_LIMIT
# define SQLITE_FP_PRECISION_LIMIT 100000000
#endif

/*
** Render a string given by "fmt" into the StrAccum object.
*/
void sqlite3_str_vappendf(
  sqlite3_str *pAccum,       /* Accumulate results here */
  const char *fmt,           /* Format string */
  va_list ap                 /* arguments */
){
  int c;                     /* Next character in the format string */
  char *bufpt;               /* Pointer to the conversion buffer */
  int precision;             /* Precision of the current field */
  int length;                /* Length of the field */
  int idx;                   /* A general purpose loop counter */
  int width;                 /* Width of the current field */
  etByte flag_leftjustify;   /* True if "-" flag is present */
  etByte flag_prefix;        /* '+' or ' ' or 0 for prefix */
  etByte flag_alternateform; /* True if "#" flag is present */
  etByte flag_altform2;      /* True if "!" flag is present */
  etByte flag_zeropad;       /* True if field width constant starts with zero */
  etByte flag_long;          /* 1 for the "l" flag, 2 for "ll", 0 by default */
  etByte done;               /* Loop termination flag */
  etByte cThousand;          /* Thousands separator for %d and %u */
  etByte xtype = etINVALID;  /* Conversion paradigm */
  u8 bArgList;               /* True for SQLITE_PRINTF_SQLFUNC */
  char prefix;               /* Prefix character.  "+" or "-" or " " or '\0'. */
  sqlite_uint64 longvalue;   /* Value for integer types */
  LONGDOUBLE_TYPE realvalue; /* Value for real types */
  const et_info *infop;      /* Pointer to the appropriate info structure */
  char *zOut;                /* Rendering buffer */
  int nOut;                  /* Size of the rendering buffer */
  char *zExtra = 0;          /* Malloced memory used by some conversion */
#ifndef SQLITE_OMIT_FLOATING_POINT
  int  exp, e2;              /* exponent of real numbers */
  int nsd;                   /* Number of significant digits returned */
  double rounder;            /* Used for rounding floating point values */
  etByte flag_dp;            /* True if decimal point should be shown */
  etByte flag_rtz;           /* True if trailing zeros should be removed */
#endif
  PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */
  char buf[etBUFSIZE];       /* Conversion buffer */

  /* pAccum never starts out with an empty buffer that was obtained from 
  ** malloc().  This precondition is required by the mprintf("%z...")
  ** optimization. */
  assert( pAccum->nChar>0 || (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 );

  bufpt = 0;
  if( (pAccum->printfFlags & SQLITE_PRINTF_SQLFUNC)!=0 ){
    pArgList = va_arg(ap, PrintfArguments*);
    bArgList = 1;
  }else{
    bArgList = 0;
  }
  for(; (c=(*fmt))!=0; ++fmt){
    if( c!='%' ){
      bufpt = (char *)fmt;
#if HAVE_STRCHRNUL
      fmt = strchrnul(fmt, '%');
#else
      do{ fmt++; }while( *fmt && *fmt != '%' );
#endif
      sqlite3_str_append(pAccum, bufpt, (int)(fmt - bufpt));
      if( *fmt==0 ) break;
    }
    if( (c=(*++fmt))==0 ){
      sqlite3_str_append(pAccum, "%", 1);
      break;
    }
    /* Find out what flags are present */
    flag_leftjustify = flag_prefix = cThousand =
     flag_alternateform = flag_altform2 = flag_zeropad = 0;
    done = 0;
    width = 0;
    flag_long = 0;
    precision = -1;
    do{
      switch( c ){
        case '-':   flag_leftjustify = 1;     break;
        case '+':   flag_prefix = '+';        break;
        case ' ':   flag_prefix = ' ';        break;
        case '#':   flag_alternateform = 1;   break;
        case '!':   flag_altform2 = 1;        break;
        case '0':   flag_zeropad = 1;         break;
        case ',':   cThousand = ',';          break;
        default:    done = 1;                 break;
        case 'l': {
          flag_long = 1;
          c = *++fmt;
          if( c=='l' ){
            c = *++fmt;
            flag_long = 2;
          }
          done = 1;
          break;
        }
        case '1': case '2': case '3': case '4': case '5':
        case '6': case '7': case '8': case '9': {
          unsigned wx = c - '0';
          while( (c = *++fmt)>='0' && c<='9' ){
            wx = wx*10 + c - '0';
          }
          testcase( wx>0x7fffffff );
          width = wx & 0x7fffffff;
#ifdef SQLITE_PRINTF_PRECISION_LIMIT
          if( width>SQLITE_PRINTF_PRECISION_LIMIT ){
            width = SQLITE_PRINTF_PRECISION_LIMIT;
          }
#endif
          if( c!='.' && c!='l' ){
            done = 1;
          }else{
            fmt--;
          }
          break;
        }
        case '*': {
          if( bArgList ){
            width = (int)getIntArg(pArgList);
          }else{
            width = va_arg(ap,int);
          }
          if( width<0 ){
            flag_leftjustify = 1;
            width = width >= -2147483647 ? -width : 0;
          }
#ifdef SQLITE_PRINTF_PRECISION_LIMIT
          if( width>SQLITE_PRINTF_PRECISION_LIMIT ){
            width = SQLITE_PRINTF_PRECISION_LIMIT;
          }
#endif
          if( (c = fmt[1])!='.' && c!='l' ){
            c = *++fmt;
            done = 1;
          }
          break;
        }
        case '.': {
          c = *++fmt;
          if( c=='*' ){
            if( bArgList ){
              precision = (int)getIntArg(pArgList);
            }else{
              precision = va_arg(ap,int);
            }
            if( precision<0 ){
              precision = precision >= -2147483647 ? -precision : -1;
            }
            c = *++fmt;
          }else{
            unsigned px = 0;
            while( c>='0' && c<='9' ){
              px = px*10 + c - '0';
              c = *++fmt;
            }
            testcase( px>0x7fffffff );
            precision = px & 0x7fffffff;
          }
#ifdef SQLITE_PRINTF_PRECISION_LIMIT
          if( precision>SQLITE_PRINTF_PRECISION_LIMIT ){
            precision = SQLITE_PRINTF_PRECISION_LIMIT;
          }
#endif
          if( c=='l' ){
            --fmt;
          }else{
            done = 1;
          }
          break;
        }
      }
    }while( !done && (c=(*++fmt))!=0 );

    /* Fetch the info entry for the field */
    infop = &fmtinfo[0];
    xtype = etINVALID;
    for(idx=0; idx<ArraySize(fmtinfo); idx++){
      if( c==fmtinfo[idx].fmttype ){
        infop = &fmtinfo[idx];
        xtype = infop->type;
        break;
      }
    }

    /*
    ** At this point, variables are initialized as follows:
    **
    **   flag_alternateform          TRUE if a '#' is present.
    **   flag_altform2               TRUE if a '!' is present.
    **   flag_prefix                 '+' or ' ' or zero
    **   flag_leftjustify            TRUE if a '-' is present or if the
    **                               field width was negative.
    **   flag_zeropad                TRUE if the width began with 0.
    **   flag_long                   1 for "l", 2 for "ll"
    **   width                       The specified field width.  This is
    **                               always non-negative.  Zero is the default.
    **   precision                   The specified precision.  The default
    **                               is -1.
    **   xtype                       The class of the conversion.
    **   infop                       Pointer to the appropriate info struct.
    */
    assert( width>=0 );
    assert( precision>=(-1) );
    switch( xtype ){
      case etPOINTER:
        flag_long = sizeof(char*)==sizeof(i64) ? 2 :
                     sizeof(char*)==sizeof(long int) ? 1 : 0;
        /* no break */ deliberate_fall_through
      case etORDINAL:
      case etRADIX:      
        cThousand = 0;
        /* no break */ deliberate_fall_through
      case etDECIMAL:
        if( infop->flags & FLAG_SIGNED ){
          i64 v;
          if( bArgList ){
            v = getIntArg(pArgList);
          }else if( flag_long ){
            if( flag_long==2 ){
              v = va_arg(ap,i64) ;
            }else{
              v = va_arg(ap,long int);
            }
          }else{
            v = va_arg(ap,int);
          }
          if( v<0 ){
            testcase( v==SMALLEST_INT64 );
            testcase( v==(-1) );
            longvalue = ~v;
            longvalue++;
            prefix = '-';
          }else{
            longvalue = v;
            prefix = flag_prefix;
          }
        }else{
          if( bArgList ){
            longvalue = (u64)getIntArg(pArgList);
          }else if( flag_long ){
            if( flag_long==2 ){
              longvalue = va_arg(ap,u64);
            }else{
              longvalue = va_arg(ap,unsigned long int);
            }
          }else{
            longvalue = va_arg(ap,unsigned int);
          }
          prefix = 0;
        }
        if( longvalue==0 ) flag_alternateform = 0;
        if( flag_zeropad && precision<width-(prefix!=0) ){
          precision = width-(prefix!=0);
        }
        if( precision<etBUFSIZE-10-etBUFSIZE/3 ){
          nOut = etBUFSIZE;
          zOut = buf;
        }else{
          u64 n;
          n = (u64)precision + 10;
          if( cThousand ) n += precision/3;
          zOut = zExtra = printfTempBuf(pAccum, n);
          if( zOut==0 ) return;
          nOut = (int)n;
        }
        bufpt = &zOut[nOut-1];
        if( xtype==etORDINAL ){
          static const char zOrd[] = "thstndrd";
          int x = (int)(longvalue % 10);
          if( x>=4 || (longvalue/10)%10==1 ){
            x = 0;
          }
          *(--bufpt) = zOrd[x*2+1];
          *(--bufpt) = zOrd[x*2];
        }
        {
          const char *cset = &aDigits[infop->charset];
          u8 base = infop->base;
          do{                                           /* Convert to ascii */
            *(--bufpt) = cset[longvalue%base];
            longvalue = longvalue/base;
          }while( longvalue>0 );
        }
        length = (int)(&zOut[nOut-1]-bufpt);
        while( precision>length ){
          *(--bufpt) = '0';                             /* Zero pad */
          length++;
        }
        if( cThousand ){
          int nn = (length - 1)/3;  /* Number of "," to insert */
          int ix = (length - 1)%3 + 1;
          bufpt -= nn;
          for(idx=0; nn>0; idx++){
            bufpt[idx] = bufpt[idx+nn];
            ix--;
            if( ix==0 ){
              bufpt[++idx] = cThousand;
              nn--;
              ix = 3;
            }
          }
        }
        if( prefix ) *(--bufpt) = prefix;               /* Add sign */
        if( flag_alternateform && infop->prefix ){      /* Add "0" or "0x" */
          const char *pre;
          char x;
          pre = &aPrefix[infop->prefix];
          for(; (x=(*pre))!=0; pre++) *(--bufpt) = x;
        }
        length = (int)(&zOut[nOut-1]-bufpt);
        break;
      case etFLOAT:
      case etEXP:
      case etGENERIC:
        if( bArgList ){
          realvalue = getDoubleArg(pArgList);
        }else{
          realvalue = va_arg(ap,double);
        }
#ifdef SQLITE_OMIT_FLOATING_POINT
        length = 0;
#else
        if( precision<0 ) precision = 6;         /* Set default precision */
#ifdef SQLITE_FP_PRECISION_LIMIT
        if( precision>SQLITE_FP_PRECISION_LIMIT ){
          precision = SQLITE_FP_PRECISION_LIMIT;
        }
#endif
        if( realvalue<0.0 ){
          realvalue = -realvalue;
          prefix = '-';
        }else{
          prefix = flag_prefix;
        }
        if( xtype==etGENERIC && precision>0 ) precision--;
        testcase( precision>0xfff );
        idx = precision & 0xfff;
        rounder = arRound[idx%10];
        while( idx>=10 ){ rounder *= 1.0e-10; idx -= 10; }
        if( xtype==etFLOAT ){
          double rx = (double)realvalue;
          sqlite3_uint64 u;
          int ex;
          memcpy(&u, &rx, sizeof(u));
          ex = -1023 + (int)((u>>52)&0x7ff);
          if( precision+(ex/3) < 15 ) rounder += realvalue*3e-16;
          realvalue += rounder;
        }
        /* Normalize realvalue to within 10.0 > realvalue >= 1.0 */
        exp = 0;
        if( sqlite3IsNaN((double)realvalue) ){
          bufpt = "NaN";
          length = 3;
          break;
        }
        if( realvalue>0.0 ){
          LONGDOUBLE_TYPE scale = 1.0;
          while( realvalue>=1e100*scale && exp<=350 ){ scale *= 1e100;exp+=100;}
          while( realvalue>=1e10*scale && exp<=350 ){ scale *= 1e10; exp+=10; }
          while( realvalue>=10.0*scale && exp<=350 ){ scale *= 10.0; exp++; }
          realvalue /= scale;
          while( realvalue<1e-8 ){ realvalue *= 1e8; exp-=8; }
          while( realvalue<1.0 ){ realvalue *= 10.0; exp--; }
          if( exp>350 ){
            bufpt = buf;
            buf[0] = prefix;
            memcpy(buf+(prefix!=0),"Inf",4);
            length = 3+(prefix!=0);
            break;
          }
        }
        bufpt = buf;
        /*
        ** If the field type is etGENERIC, then convert to either etEXP
        ** or etFLOAT, as appropriate.
        */
        if( xtype!=etFLOAT ){
          realvalue += rounder;
          if( realvalue>=10.0 ){ realvalue *= 0.1; exp++; }
        }
        if( xtype==etGENERIC ){
          flag_rtz = !flag_alternateform;
          if( exp<-4 || exp>precision ){
            xtype = etEXP;
          }else{
            precision = precision - exp;
            xtype = etFLOAT;
          }
        }else{
          flag_rtz = flag_altform2;
        }
        if( xtype==etEXP ){
          e2 = 0;
        }else{
          e2 = exp;
        }
        {
          i64 szBufNeeded;           /* Size of a temporary buffer needed */
          szBufNeeded = MAX(e2,0)+(i64)precision+(i64)width+15;
          if( szBufNeeded > etBUFSIZE ){
            bufpt = zExtra = printfTempBuf(pAccum, szBufNeeded);
            if( bufpt==0 ) return;
          }
        }
        zOut = bufpt;
        nsd = 16 + flag_altform2*10;
        flag_dp = (precision>0 ?1:0) | flag_alternateform | flag_altform2;
        /* The sign in front of the number */
        if( prefix ){
          *(bufpt++) = prefix;
        }
        /* Digits prior to the decimal point */
        if( e2<0 ){
          *(bufpt++) = '0';
        }else{
          for(; e2>=0; e2--){
            *(bufpt++) = et_getdigit(&realvalue,&nsd);
          }
        }
        /* The decimal point */
        if( flag_dp ){
          *(bufpt++) = '.';
        }
        /* "0" digits after the decimal point but before the first
        ** significant digit of the number */
        for(e2++; e2<0; precision--, e2++){
          assert( precision>0 );
          *(bufpt++) = '0';
        }
        /* Significant digits after the decimal point */
        while( (precision--)>0 ){
          *(bufpt++) = et_getdigit(&realvalue,&nsd);
        }
        /* Remove trailing zeros and the "." if no digits follow the "." */
        if( flag_rtz && flag_dp ){
          while( bufpt[-1]=='0' ) *(--bufpt) = 0;
          assert( bufpt>zOut );
          if( bufpt[-1]=='.' ){
            if( flag_altform2 ){
              *(bufpt++) = '0';
            }else{
              *(--bufpt) = 0;
            }
          }
        }
        /* Add the "eNNN" suffix */
        if( xtype==etEXP ){
          *(bufpt++) = aDigits[infop->charset];
          if( exp<0 ){
            *(bufpt++) = '-'; exp = -exp;
          }else{
            *(bufpt++) = '+';
          }
          if( exp>=100 ){
            *(bufpt++) = (char)((exp/100)+'0');        /* 100's digit */
            exp %= 100;
          }
          *(bufpt++) = (char)(exp/10+'0');             /* 10's digit */
          *(bufpt++) = (char)(exp%10+'0');             /* 1's digit */
        }
        *bufpt = 0;

        /* The converted number is in buf[] and zero terminated. Output it.
        ** Note that the number is in the usual order, not reversed as with
        ** integer conversions. */
        length = (int)(bufpt-zOut);
        bufpt = zOut;

        /* Special case:  Add leading zeros if the flag_zeropad flag is
        ** set and we are not left justified */
        if( flag_zeropad && !flag_leftjustify && length < width){
          int i;
          int nPad = width - length;
          for(i=width; i>=nPad; i--){
            bufpt[i] = bufpt[i-nPad];
          }
          i = prefix!=0;
          while( nPad-- ) bufpt[i++] = '0';
          length = width;
        }
#endif /* !defined(SQLITE_OMIT_FLOATING_POINT) */
        break;
      case etSIZE:
        if( !bArgList ){
          *(va_arg(ap,int*)) = pAccum->nChar;
        }
        length = width = 0;
        break;
      case etPERCENT:
        buf[0] = '%';
        bufpt = buf;
        length = 1;
        break;
      case etCHARX:
        if( bArgList ){
          bufpt = getTextArg(pArgList);
          length = 1;
          if( bufpt ){
            buf[0] = c = *(bufpt++);
            if( (c&0xc0)==0xc0 ){
              while( length<4 && (bufpt[0]&0xc0)==0x80 ){
                buf[length++] = *(bufpt++);
              }
            }
          }else{
            buf[0] = 0;
          }
        }else{
          unsigned int ch = va_arg(ap,unsigned int);
          if( ch<0x00080 ){
            buf[0] = ch & 0xff;
            length = 1;
          }else if( ch<0x00800 ){
            buf[0] = 0xc0 + (u8)((ch>>6)&0x1f);
            buf[1] = 0x80 + (u8)(ch & 0x3f);
            length = 2;
          }else if( ch<0x10000 ){
            buf[0] = 0xe0 + (u8)((ch>>12)&0x0f);
            buf[1] = 0x80 + (u8)((ch>>6) & 0x3f);
            buf[2] = 0x80 + (u8)(ch & 0x3f);
            length = 3;
          }else{
            buf[0] = 0xf0 + (u8)((ch>>18) & 0x07);
            buf[1] = 0x80 + (u8)((ch>>12) & 0x3f);
            buf[2] = 0x80 + (u8)((ch>>6) & 0x3f);
            buf[3] = 0x80 + (u8)(ch & 0x3f);
            length = 4;
          }
        }
        if( precision>1 ){
          width -= precision-1;
          if( width>1 && !flag_leftjustify ){
            sqlite3_str_appendchar(pAccum, width-1, ' ');
            width = 0;
          }
          while( precision-- > 1 ){
            sqlite3_str_append(pAccum, buf, length);
          }
        }
        bufpt = buf;
        flag_altform2 = 1;
        goto adjust_width_for_utf8;
      case etSTRING:
      case etDYNSTRING:
        if( bArgList ){
          bufpt = getTextArg(pArgList);
          xtype = etSTRING;
        }else{
          bufpt = va_arg(ap,char*);
        }
        if( bufpt==0 ){
          bufpt = "";
        }else if( xtype==etDYNSTRING ){
          if( pAccum->nChar==0
           && pAccum->mxAlloc
           && width==0
           && precision<0
           && pAccum->accError==0
          ){
            /* Special optimization for sqlite3_mprintf("%z..."):
            ** Extend an existing memory allocation rather than creating
            ** a new one. */
            assert( (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 );
            pAccum->zText = bufpt;
            pAccum->nAlloc = sqlite3DbMallocSize(pAccum->db, bufpt);
            pAccum->nChar = 0x7fffffff & (int)strlen(bufpt);
            pAccum->printfFlags |= SQLITE_PRINTF_MALLOCED;
            length = 0;
            break;
          }
          zExtra = bufpt;
        }
        if( precision>=0 ){
          if( flag_altform2 ){
            /* Set length to the number of bytes needed in order to display
            ** precision characters */
            unsigned char *z = (unsigned char*)bufpt;
            while( precision-- > 0 && z[0] ){
              SQLITE_SKIP_UTF8(z);
            }
            length = (int)(z - (unsigned char*)bufpt);
          }else{
            for(length=0; length<precision && bufpt[length]; length++){}
          }
        }else{
          length = 0x7fffffff & (int)strlen(bufpt);
        }
      adjust_width_for_utf8:
        if( flag_altform2 && width>0 ){
          /* Adjust width to account for extra bytes in UTF-8 characters */
          int ii = length - 1;
          while( ii>=0 ) if( (bufpt[ii--] & 0xc0)==0x80 ) width++;
        }
        break;
      case etSQLESCAPE:           /* %q: Escape ' characters */
      case etSQLESCAPE2:          /* %Q: Escape ' and enclose in '...' */
      case etSQLESCAPE3: {        /* %w: Escape " characters */
        int i, j, k, n, isnull;
        int needQuote;
        char ch;
        char q = ((xtype==etSQLESCAPE3)?'"':'\'');   /* Quote character */
        char *escarg;

        if( bArgList ){
          escarg = getTextArg(pArgList);
        }else{
          escarg = va_arg(ap,char*);
        }
        isnull = escarg==0;
        if( isnull ) escarg = (xtype==etSQLESCAPE2 ? "NULL" : "(NULL)");
        /* For %q, %Q, and %w, the precision is the number of bytes (or
        ** characters if the ! flags is present) to use from the input.
        ** Because of the extra quoting characters inserted, the number
        ** of output characters may be larger than the precision.
        */
        k = precision;
        for(i=n=0; k!=0 && (ch=escarg[i])!=0; i++, k--){
          if( ch==q )  n++;
          if( flag_altform2 && (ch&0xc0)==0xc0 ){
            while( (escarg[i+1]&0xc0)==0x80 ){ i++; }
          }
        }
        needQuote = !isnull && xtype==etSQLESCAPE2;
        n += i + 3;
        if( n>etBUFSIZE ){
          bufpt = zExtra = printfTempBuf(pAccum, n);
          if( bufpt==0 ) return;
        }else{
          bufpt = buf;
        }
        j = 0;
        if( needQuote ) bufpt[j++] = q;
        k = i;
        for(i=0; i<k; i++){
          bufpt[j++] = ch = escarg[i];
          if( ch==q ) bufpt[j++] = ch;
        }
        if( needQuote ) bufpt[j++] = q;
        bufpt[j] = 0;
        length = j;
        goto adjust_width_for_utf8;
      }
      case etTOKEN: {
        if( (pAccum->printfFlags & SQLITE_PRINTF_INTERNAL)==0 ) return;
        if( flag_alternateform ){
          /* %#T means an Expr pointer that uses Expr.u.zToken */
          Expr *pExpr = va_arg(ap,Expr*);
          if( ALWAYS(pExpr) && ALWAYS(!ExprHasProperty(pExpr,EP_IntValue)) ){
            sqlite3_str_appendall(pAccum, (const char*)pExpr->u.zToken);
            sqlite3RecordErrorOffsetOfExpr(pAccum->db, pExpr);
          }
        }else{
          /* %T means a Token pointer */
          Token *pToken = va_arg(ap, Token*);
          assert( bArgList==0 );
          if( pToken && pToken->n ){
            sqlite3_str_append(pAccum, (const char*)pToken->z, pToken->n);
            sqlite3RecordErrorByteOffset(pAccum->db, pToken->z);
          }
        }
        length = width = 0;
        break;
      }
      case etSRCITEM: {
        SrcItem *pItem;
        if( (pAccum->printfFlags & SQLITE_PRINTF_INTERNAL)==0 ) return;
        pItem = va_arg(ap, SrcItem*);
        assert( bArgList==0 );
        if( pItem->zAlias && !flag_altform2 ){
          sqlite3_str_appendall(pAccum, pItem->zAlias);
        }else if( pItem->zName ){
          if( pItem->zDatabase ){
            sqlite3_str_appendall(pAccum, pItem->zDatabase);
            sqlite3_str_append(pAccum, ".", 1);
          }
          sqlite3_str_appendall(pAccum, pItem->zName);
        }else if( pItem->zAlias ){
          sqlite3_str_appendall(pAccum, pItem->zAlias);
        }else{
          Select *pSel = pItem->pSelect;
          assert( pSel!=0 );
          if( pSel->selFlags & SF_NestedFrom ){
            sqlite3_str_appendf(pAccum, "(join-%u)", pSel->selId);
          }else{
            sqlite3_str_appendf(pAccum, "(subquery-%u)", pSel->selId);
          }
        }
        length = width = 0;
        break;
      }
      default: {
        assert( xtype==etINVALID );
        return;
      }
    }/* End switch over the format type */
    /*
    ** The text of the conversion is pointed to by "bufpt" and is
    ** "length" characters long.  The field width is "width".  Do
    ** the output.  Both length and width are in bytes, not characters,
    ** at this point.  If the "!" flag was present on string conversions
    ** indicating that width and precision should be expressed in characters,
    ** then the values have been translated prior to reaching this point.
    */
    width -= length;
    if( width>0 ){
      if( !flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' ');
      sqlite3_str_append(pAccum, bufpt, length);
      if( flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' ');
    }else{
      sqlite3_str_append(pAccum, bufpt, length);
    }

    if( zExtra ){
      sqlite3DbFree(pAccum->db, zExtra);
      zExtra = 0;
    }
  }/* End for loop over the format string */
} /* End of function */


/*
** The z string points to the first character of a token that is
** associated with an error.  If db does not already have an error
** byte offset recorded, try to compute the error byte offset for
** z and set the error byte offset in db.
*/
void sqlite3RecordErrorByteOffset(sqlite3 *db, const char *z){
  const Parse *pParse;
  const char *zText;
  const char *zEnd;
  assert( z!=0 );
  if( NEVER(db==0) ) return;
  if( db->errByteOffset!=(-2) ) return;
  pParse = db->pParse;
  if( NEVER(pParse==0) ) return;
  zText =pParse->zTail;
  if( NEVER(zText==0) ) return;
  zEnd = &zText[strlen(zText)];
  if( SQLITE_WITHIN(z,zText,zEnd) ){
    db->errByteOffset = (int)(z-zText);
  }
}

/*
** If pExpr has a byte offset for the start of a token, record that as
** as the error offset.
*/
void sqlite3RecordErrorOffsetOfExpr(sqlite3 *db, const Expr *pExpr){
  while( pExpr
     && (ExprHasProperty(pExpr,EP_OuterON|EP_InnerON) || pExpr->w.iOfst<=0)
  ){
    pExpr = pExpr->pLeft;
  }
  if( pExpr==0 ) return;
  db->errByteOffset = pExpr->w.iOfst;
}

/*
** Enlarge the memory allocation on a StrAccum object so that it is
** able to accept at least N more bytes of text.
**
** Return the number of bytes of text that StrAccum is able to accept
** after the attempted enlargement.  The value returned might be zero.
*/
int sqlite3StrAccumEnlarge(StrAccum *p, int N){
  char *zNew;
  assert( p->nChar+(i64)N >= p->nAlloc ); /* Only called if really needed */
  if( p->accError ){
    testcase(p->accError==SQLITE_TOOBIG);
    testcase(p->accError==SQLITE_NOMEM);
    return 0;
  }
  if( p->mxAlloc==0 ){
    sqlite3StrAccumSetError(p, SQLITE_TOOBIG);
    return p->nAlloc - p->nChar - 1;
  }else{
    char *zOld = isMalloced(p) ? p->zText : 0;
    i64 szNew = p->nChar;
    szNew += (sqlite3_int64)N + 1;
    if( szNew+p->nChar<=p->mxAlloc ){
      /* Force exponential buffer size growth as long as it does not overflow,
      ** to avoid having to call this routine too often */
      szNew += p->nChar;
    }
    if( szNew > p->mxAlloc ){
      sqlite3_str_reset(p);
      sqlite3StrAccumSetError(p, SQLITE_TOOBIG);
      return 0;
    }else{
      p->nAlloc = (int)szNew;
    }
    if( p->db ){
      zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc);
    }else{
      zNew = sqlite3Realloc(zOld, p->nAlloc);
    }
    if( zNew ){
      assert( p->zText!=0 || p->nChar==0 );
      if( !isMalloced(p) && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar);
      p->zText = zNew;
      p->nAlloc = sqlite3DbMallocSize(p->db, zNew);
      p->printfFlags |= SQLITE_PRINTF_MALLOCED;
    }else{
      sqlite3_str_reset(p);
      sqlite3StrAccumSetError(p, SQLITE_NOMEM);
      return 0;
    }
  }
  return N;
}

/*
** Append N copies of character c to the given string buffer.
*/
void sqlite3_str_appendchar(sqlite3_str *p, int N, char c){
  testcase( p->nChar + (i64)N > 0x7fffffff );
  if( p->nChar+(i64)N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ){
    return;
  }
  while( (N--)>0 ) p->zText[p->nChar++] = c;
}

/*
** The StrAccum "p" is not large enough to accept N new bytes of z[].
** So enlarge if first, then do the append.
**
** This is a helper routine to sqlite3_str_append() that does special-case
** work (enlarging the buffer) using tail recursion, so that the
** sqlite3_str_append() routine can use fast calling semantics.
*/
static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){
  N = sqlite3StrAccumEnlarge(p, N);
  if( N>0 ){
    memcpy(&p->zText[p->nChar], z, N);
    p->nChar += N;
  }
}

/*
** Append N bytes of text from z to the StrAccum object.  Increase the
** size of the memory allocation for StrAccum if necessary.
*/
void sqlite3_str_append(sqlite3_str *p, const char *z, int N){
  assert( z!=0 || N==0 );
  assert( p->zText!=0 || p->nChar==0 || p->accError );
  assert( N>=0 );
  assert( p->accError==0 || p->nAlloc==0 || p->mxAlloc==0 );
  if( p->nChar+N >= p->nAlloc ){
    enlargeAndAppend(p,z,N);
  }else if( N ){
    assert( p->zText );
    p->nChar += N;
    memcpy(&p->zText[p->nChar-N], z, N);
  }
}

/*
** Append the complete text of zero-terminated string z[] to the p string.
*/
void sqlite3_str_appendall(sqlite3_str *p, const char *z){
  sqlite3_str_append(p, z, sqlite3Strlen30(z));
}


/*
** Finish off a string by making sure it is zero-terminated.
** Return a pointer to the resulting string.  Return a NULL
** pointer if any kind of error was encountered.
*/
static SQLITE_NOINLINE char *strAccumFinishRealloc(StrAccum *p){
  char *zText;
  assert( p->mxAlloc>0 && !isMalloced(p) );
  zText = sqlite3DbMallocRaw(p->db, p->nChar+1 );
  if( zText ){
    memcpy(zText, p->zText, p->nChar+1);
    p->printfFlags |= SQLITE_PRINTF_MALLOCED;
  }else{
    sqlite3StrAccumSetError(p, SQLITE_NOMEM);
  }
  p->zText = zText;
  return zText;
}
char *sqlite3StrAccumFinish(StrAccum *p){
  if( p->zText ){
    p->zText[p->nChar] = 0;
    if( p->mxAlloc>0 && !isMalloced(p) ){
      return strAccumFinishRealloc(p);
    }
  }
  return p->zText;
}

/*
** Use the content of the StrAccum passed as the second argument
** as the result of an SQL function.
*/
void sqlite3ResultStrAccum(sqlite3_context *pCtx, StrAccum *p){
  if( p->accError ){
    sqlite3_result_error_code(pCtx, p->accError);
    sqlite3_str_reset(p);
  }else if( isMalloced(p) ){
    sqlite3_result_text(pCtx, p->zText, p->nChar, SQLITE_DYNAMIC);
  }else{
    sqlite3_result_text(pCtx, "", 0, SQLITE_STATIC);
    sqlite3_str_reset(p);
  }
}

/*
** This singleton is an sqlite3_str object that is returned if
** sqlite3_malloc() fails to provide space for a real one.  This
** sqlite3_str object accepts no new text and always returns
** an SQLITE_NOMEM error.
*/
static sqlite3_str sqlite3OomStr = {
   0, 0, 0, 0, 0, SQLITE_NOMEM, 0
};

/* Finalize a string created using sqlite3_str_new().
*/
char *sqlite3_str_finish(sqlite3_str *p){
  char *z;
  if( p!=0 && p!=&sqlite3OomStr ){
    z = sqlite3StrAccumFinish(p);
    sqlite3_free(p);
  }else{
    z = 0;
  }
  return z;
}

/* Return any error code associated with p */
int sqlite3_str_errcode(sqlite3_str *p){
  return p ? p->accError : SQLITE_NOMEM;
}

/* Return the current length of p in bytes */
int sqlite3_str_length(sqlite3_str *p){
  return p ? p->nChar : 0;
}

/* Return the current value for p */
char *sqlite3_str_value(sqlite3_str *p){
  if( p==0 || p->nChar==0 ) return 0;
  p->zText[p->nChar] = 0;
  return p->zText;
}

/*
** Reset an StrAccum string.  Reclaim all malloced memory.
*/
void sqlite3_str_reset(StrAccum *p){
  if( isMalloced(p) ){
    sqlite3DbFree(p->db, p->zText);
    p->printfFlags &= ~SQLITE_PRINTF_MALLOCED;
  }
  p->nAlloc = 0;
  p->nChar = 0;
  p->zText = 0;
}

/*
** Initialize a string accumulator.
**
** p:     The accumulator to be initialized.
** db:    Pointer to a database connection.  May be NULL.  Lookaside
**        memory is used if not NULL. db->mallocFailed is set appropriately
**        when not NULL.
** zBase: An initial buffer.  May be NULL in which case the initial buffer
**        is malloced.
** n:     Size of zBase in bytes.  If total space requirements never exceed
**        n then no memory allocations ever occur.
** mx:    Maximum number of bytes to accumulate.  If mx==0 then no memory
**        allocations will ever occur.
*/
void sqlite3StrAccumInit(StrAccum *p, sqlite3 *db, char *zBase, int n, int mx){
  p->zText = zBase;
  p->db = db;
  p->nAlloc = n;
  p->mxAlloc = mx;
  p->nChar = 0;
  p->accError = 0;
  p->printfFlags = 0;
}

/* Allocate and initialize a new dynamic string object */
sqlite3_str *sqlite3_str_new(sqlite3 *db){
  sqlite3_str *p = sqlite3_malloc64(sizeof(*p));
  if( p ){
    sqlite3StrAccumInit(p, 0, 0, 0,
            db ? db->aLimit[SQLITE_LIMIT_LENGTH] : SQLITE_MAX_LENGTH);
  }else{
    p = &sqlite3OomStr;
  }
  return p;
}

/*
** Print into memory obtained from sqliteMalloc().  Use the internal
** %-conversion extensions.
*/
char *sqlite3VMPrintf(sqlite3 *db, const char *zFormat, va_list ap){
  char *z;
  char zBase[SQLITE_PRINT_BUF_SIZE];
  StrAccum acc;
  assert( db!=0 );
  sqlite3StrAccumInit(&acc, db, zBase, sizeof(zBase),
                      db->aLimit[SQLITE_LIMIT_LENGTH]);
  acc.printfFlags = SQLITE_PRINTF_INTERNAL;
  sqlite3_str_vappendf(&acc, zFormat, ap);
  z = sqlite3StrAccumFinish(&acc);
  if( acc.accError==SQLITE_NOMEM ){
    sqlite3OomFault(db);
  }
  return z;
}

/*
** Print into memory obtained from sqliteMalloc().  Use the internal
** %-conversion extensions.
*/
char *sqlite3MPrintf(sqlite3 *db, const char *zFormat, ...){
  va_list ap;
  char *z;
  va_start(ap, zFormat);
  z = sqlite3VMPrintf(db, zFormat, ap);
  va_end(ap);
  return z;
}

/*
** Print into memory obtained from sqlite3_malloc().  Omit the internal
** %-conversion extensions.
*/
char *sqlite3_vmprintf(const char *zFormat, va_list ap){
  char *z;
  char zBase[SQLITE_PRINT_BUF_SIZE];
  StrAccum acc;

#ifdef SQLITE_ENABLE_API_ARMOR  
  if( zFormat==0 ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  sqlite3StrAccumInit(&acc, 0, zBase, sizeof(zBase), SQLITE_MAX_LENGTH);
  sqlite3_str_vappendf(&acc, zFormat, ap);
  z = sqlite3StrAccumFinish(&acc);
  return z;
}

/*
** Print into memory obtained from sqlite3_malloc()().  Omit the internal
** %-conversion extensions.
*/
char *sqlite3_mprintf(const char *zFormat, ...){
  va_list ap;
  char *z;
#ifndef SQLITE_OMIT_AUTOINIT
  if( sqlite3_initialize() ) return 0;
#endif
  va_start(ap, zFormat);
  z = sqlite3_vmprintf(zFormat, ap);
  va_end(ap);
  return z;
}

/*
** sqlite3_snprintf() works like snprintf() except that it ignores the
** current locale settings.  This is important for SQLite because we
** are not able to use a "," as the decimal point in place of "." as
** specified by some locales.
**
** Oops:  The first two arguments of sqlite3_snprintf() are backwards
** from the snprintf() standard.  Unfortunately, it is too late to change
** this without breaking compatibility, so we just have to live with the
** mistake.
**
** sqlite3_vsnprintf() is the varargs version.
*/
char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
  StrAccum acc;
  if( n<=0 ) return zBuf;
#ifdef SQLITE_ENABLE_API_ARMOR
  if( zBuf==0 || zFormat==0 ) {
    (void)SQLITE_MISUSE_BKPT;
    if( zBuf ) zBuf[0] = 0;
    return zBuf;
  }
#endif
  sqlite3StrAccumInit(&acc, 0, zBuf, n, 0);
  sqlite3_str_vappendf(&acc, zFormat, ap);
  zBuf[acc.nChar] = 0;
  return zBuf;
}
char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
  char *z;
  va_list ap;
  va_start(ap,zFormat);
  z = sqlite3_vsnprintf(n, zBuf, zFormat, ap);
  va_end(ap);
  return z;
}

/*
** This is the routine that actually formats the sqlite3_log() message.
** We house it in a separate routine from sqlite3_log() to avoid using
** stack space on small-stack systems when logging is disabled.
**
** sqlite3_log() must render into a static buffer.  It cannot dynamically
** allocate memory because it might be called while the memory allocator
** mutex is held.
**
** sqlite3_str_vappendf() might ask for *temporary* memory allocations for
** certain format characters (%q) or for very large precisions or widths.
** Care must be taken that any sqlite3_log() calls that occur while the
** memory mutex is held do not use these mechanisms.
*/
static void renderLogMsg(int iErrCode, const char *zFormat, va_list ap){
  StrAccum acc;                          /* String accumulator */
  char zMsg[SQLITE_PRINT_BUF_SIZE*3];    /* Complete log message */

  sqlite3StrAccumInit(&acc, 0, zMsg, sizeof(zMsg), 0);
  sqlite3_str_vappendf(&acc, zFormat, ap);
  sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode,
                           sqlite3StrAccumFinish(&acc));
}

/*
** Format and write a message to the log if logging is enabled.
*/
void sqlite3_log(int iErrCode, const char *zFormat, ...){
  va_list ap;                             /* Vararg list */
  if( sqlite3GlobalConfig.xLog ){
    va_start(ap, zFormat);
    renderLogMsg(iErrCode, zFormat, ap);
    va_end(ap);
  }
}

#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
/*
** A version of printf() that understands %lld.  Used for debugging.
** The printf() built into some versions of windows does not understand %lld
** and segfaults if you give it a long long int.
*/
void sqlite3DebugPrintf(const char *zFormat, ...){
  va_list ap;
  StrAccum acc;
  char zBuf[SQLITE_PRINT_BUF_SIZE*10];
  sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0);
  va_start(ap,zFormat);
  sqlite3_str_vappendf(&acc, zFormat, ap);
  va_end(ap);
  sqlite3StrAccumFinish(&acc);
#ifdef SQLITE_OS_TRACE_PROC
  {
    extern void SQLITE_OS_TRACE_PROC(const char *zBuf, int nBuf);
    SQLITE_OS_TRACE_PROC(zBuf, sizeof(zBuf));
  }
#else
  fprintf(stdout,"%s", zBuf);
  fflush(stdout);
#endif
}
#endif


/*
** variable-argument wrapper around sqlite3_str_vappendf(). The bFlags argument
** can contain the bit SQLITE_PRINTF_INTERNAL enable internal formats.
*/
void sqlite3_str_appendf(StrAccum *p, const char *zFormat, ...){
  va_list ap;
  va_start(ap,zFormat);
  sqlite3_str_vappendf(p, zFormat, ap);
  va_end(ap);
}
