/ Artifact Content
Login

Artifact d446234c1d3ed747fcefd30e972a19f2b2fc0e05:


#
# Run this Tcl script to generate the sqlite.html file.
#
set rcsid {$Id: c_interface.tcl,v 1.19 2001/10/31 15:44:47 drh Exp $}

puts {<html>
<head>
  <title>The C language interface to the SQLite library</title>
</head>
<body bgcolor=white>
<h1 align=center>
The C language interface to the SQLite library
</h1>}
puts "<p align=center>
(This page was last modified on [lrange $rcsid 3 4] GMT)
</p>"

puts {
<p>The SQLite library is designed to be very easy to use from
a C or C++ program.  This document gives an overview of the C/C++
programming interface.</p>

<h2>The Core API</h2>

<p>The interface to the SQLite library consists of three core functions,
one opaque data structure, and some constants used as return values.
The core interface is as follows:</p>

<blockquote><pre>
typedef struct sqlite sqlite;
#define SQLITE_OK           0   /* Successful result */

sqlite *sqlite_open(const char *dbname, int mode, char **errmsg);

void sqlite_close(sqlite*);

int sqlite_exec(
  sqlite*,
  char *sql,
  int (*)(void*,int,char**,char**),
  void*,
  char **errmsg
);
</pre></blockquote>

<p>
The above is all you really need to know in order to use SQLite
in your C or C++ programs.  There are other convenience functions
available (and described below) but we will begin by describing
the core functions shown above.
</p>
<h2>Opening a database</h2>

<p>Use the <b>sqlite_open()</b> function to open an existing SQLite
database or to create a new SQLite database.  The first argument
is the database name.  The second argument is intended to signal
whether the database is going to be used for reading and writing
or just for reading.  But in the current implementation, the
second argument to <b>sqlite_open</b> is ignored.
The third argument is a pointer to a string pointer.
If the third argument is not NULL and an error occurs
while trying to open the database, then an error message will be
written to memory obtained from malloc() and *errmsg will be made
to point to this error message.  The calling function is responsible
for freeing the memory when it has finished with it.</p>

<p>The name of an SQLite database is the name of a file that will
contain the database.  If the file does not exist, SQLite attempts
to create and initialize it.  If the file is read-only (due to
permission bits or because it is located on read-only media like
a CD-ROM) then SQLite opens the database for reading only.  The
entire SQL database is stored in a single file on the disk.  But
additional temporary files may be created during the execution of
an SQL command in order to store the database rollback journal or
temporary and intermediate results of a query.</p>

<p>The return value of the <b>sqlite_open()</b> function is a
pointer to an opaque <b>sqlite</b> structure.  This pointer will
be the first argument to all subsequent SQLite function calls that
deal with the same database.  NULL is returned if the open fails
for any reason.</p>

<h2>Closing the database</h2>

<p>To close an SQLite database, call the <b>sqlite_close()</b>
function passing it the sqlite structure pointer that was obtained
from a prior call to <b>sqlite_open</b>.
If a transaction is active when the database is closed, the transaction
is rolled back.</p>

<h2>Executing SQL statements</h2>

<p>The <b>sqlite_exec()</b> function is used to process SQL statements
and queries.  This function requires 5 parameters as follows:</p>

<ol>
<li><p>A pointer to the sqlite structure obtained from a prior call
       to <b>sqlite_open()</b>.</p></li>
<li><p>A null-terminated string containing the text of one or more
       SQL statements and/or queries to be processed.</p></li>
<li><p>A pointer to a callback function which is invoked once for each
       row in the result of a query.  This argument may be NULL, in which
       case no callbacks will ever be invoked.</p></li>
<li><p>A pointer that is forwarded to become the first argument
       to the callback function.</p></li>
<li><p>A pointer to an error string.  Error messages are written to space
       obtained from malloc() and the error string is made to point to
       the malloced space.  The calling function is responsible for freeing
       this space when it has finished with it.
       This argument may be NULL, in which case error messages are not
       reported back to the calling function.</p></li>
</ol>

<p>
The callback function is used to receive the results of a query.  A
prototype for the callback function is as follows:</p>

<blockquote><pre>
int Callback(void *pArg, int argc, char **argv, char **columnNames){
  return 0;
}
</pre></blockquote>

<p>The first argument to the callback is just a copy of the fourth argument
to <b>sqlite_exec()</b>  This parameter can be used to pass arbitrary
information through to the callback function from client code.
The second argument is the number columns in the query result.
The third argument is an array of pointers to strings where each string
is a single column of the result for that record.  Note that the
callback function reports a NULL value in the database as a NULL pointer,
which is very different from an empty string.  If the i-th parameter
is an empty string, we will get:</p>
<blockquote><pre>
argv[i][0] == 0
</pre></blockquote>
<p>But if the i-th parameter is NULL we will get:</p>
<blockquote><pre>
argv[i] == 0
</pre></blockquote>
<p>The names of the columns are contained in the fourth argument.</p>

<p>If the EMPTY_RESULT_CALLBACKS pragma is set to ON and the result of
a query is an empty set, then the callback is invoked once with the
third parameter (argv) set to 0.  In other words
<blockquote><pre>
argv == 0
</pre></blockquote>
The second parameter (argc)
and the fourth parameter (columnNames) are still valid
and can be used to determine the number and names of the result
columns if there had been a result.
The default behavior is not to invoke the callback at all if the
result set is empty.</p>

<p>The callback function should normally return 0.  If the callback
function returns non-zero, the query is immediately aborted and 
<b>sqlite_exec()</b> will return SQLITE_ABORT.</p>

<h2>Error Codes</h2>

<p>
The <b>sqlite_exec()</b> function normally returns SQLITE_OK.  But
if something goes wrong it can return a different value to indicate
the type of error.  Here is a complete list of the return codes:
</p>

<blockquote><pre>
#define SQLITE_OK           0   /* Successful result */
#define SQLITE_ERROR        1   /* SQL error or missing database */
#define SQLITE_INTERNAL     2   /* An internal logic error in SQLite */
#define SQLITE_PERM         3   /* Access permission denied */
#define SQLITE_ABORT        4   /* Callback routine requested an abort */
#define SQLITE_BUSY         5   /* The database file is locked */
#define SQLITE_LOCKED       6   /* A table in the database is locked */
#define SQLITE_NOMEM        7   /* A malloc() failed */
#define SQLITE_READONLY     8   /* Attempt to write a readonly database */
#define SQLITE_INTERRUPT    9   /* Operation terminated by sqlite_interrupt() */
#define SQLITE_IOERR       10   /* Some kind of disk I/O error occurred */
#define SQLITE_CORRUPT     11   /* The database disk image is malformed */
#define SQLITE_NOTFOUND    12   /* (Internal Only) Table or record not found */
#define SQLITE_FULL        13   /* Insertion failed because database is full */
#define SQLITE_CANTOPEN    14   /* Unable to open the database file */
#define SQLITE_PROTOCOL    15   /* Database lock protocol error */
#define SQLITE_EMPTY       16   /* (Internal Only) Database table is empty */
#define SQLITE_SCHEMA      17   /* The database schema changed */
#define SQLITE_TOOBIG      18   /* Too much data for one row of a table */
#define SQLITE_CONSTRAINT  19   /* Abort due to contraint violation */
</pre></blockquote>

<p>
The meanings of these various return values are as follows:
</p>

<blockquote>
<dl>
<dt>SQLITE_OK</dt>
<dd><p>This value is returned if everything worked and there were no errors.
</p></dd>
<dt>SQLITE_INTERNAL</dt>
<dd><p>This value indicates that an internal consistency check within
the SQLite library failed.  This can only happen if there is a bug in
the SQLite library.  If you ever get an SQLITE_INTERNAL reply from
an <b>sqlite_exec()</b> call, please report the problem on the SQLite
mailing list.
</p></dd>
<dt>SQLITE_ERROR</dt>
<dd><p>This return value indicates that there was an error in the SQL
that was passed into the <b>sqlite_exec()</b>.
</p></dd>
<dt>SQLITE_PERM</dt>
<dd><p>This return value says that the access permissions on the database
file are such that the file cannot be opened.
</p></dd>
<dt>SQLITE_ABORT</dt>
<dd><p>This value is returned if the callback function returns non-zero.
</p></dd>
<dt>SQLITE_BUSY</dt>
<dd><p>This return code indicates that another program or thread has
the database locked.  SQLite allows two or more threads to read the
database at the same time, but only one thread can have the database
open for writing at the same time.  Locking in SQLite is on the
entire database.</p>
</p></dd>
<dt>SQLITE_LOCKED</dt>
<dd><p>This return code is similar to SQLITE_BUSY in that it indicates
that the database is locked.  But the source of the lock is a recursive
call to <b>sqlite_exec()</b>.  This return can only occur if you attempt
to invoke sqlite_exec() from within a callback routine of a query
from a prior invocation of sqlite_exec().  Recursive calls to
sqlite_exec() are allowed as long as they do
not attempt to write the same table.
</p></dd>
<dt>SQLITE_NOMEM</dt>
<dd><p>This value is returned if a call to <b>malloc()</b> fails.
</p></dd>
<dt>SQLITE_READONLY</dt>
<dd><p>This return code indicates that an attempt was made to write to
a database file that is opened for reading only.
</p></dd>
<dt>SQLITE_INTERRUPT</dt>
<dd><p>This value is returned if a call to <b>sqlite_interrupt()</b>
interrupts a database operation in progress.
</p></dd>
<dt>SQLITE_IOERR</dt>
<dd><p>This value is returned if the operating system informs SQLite
that it is unable to perform some disk I/O operation.  This could mean
that there is no more space left on the disk.
</p></dd>
<dt>SQLITE_CORRUPT</dt>
<dd><p>This value is returned if SQLite detects that the database it is
working on has become corrupted.  Corruption might occur due to a rogue
process writing to the database file or it might happen due to an 
perviously undetected logic error in of SQLite. This value is also
returned if a disk I/O error occurs in such a way that SQLite is forced
to leave the database file in a corrupted state.  The latter should only
happen due to a hardware or operating system malfunction.
</p></dd>
<dt>SQLITE_FULL</dt>
<dd><p>This value is returned if an insertion failed because there is
no space left on the disk, or the database is too big to hold any
more information.  The latter case should only occur for databases
that are larger than 2GB in size.
</p></dd>
<dt>SQLITE_CANTOPEN</dt>
<dd><p>This value is returned if the database file could not be opened
for some reason.
</p></dd>
<dt>SQLITE_PROTOCOL</dt>
<dd><p>This value is returned if some other process is messing with
file locks and has violated the file locking protocol that SQLite uses
on its rollback journal files.
</p></dd>
<dt>SQLITE_SCHEMA</dt>
<dd><p>When the database first opened, SQLite reads the database schema
into memory and uses that schema to parse new SQL statements.  If another
process changes the schema, the command currently being processed will
abort because the virtual machine code generated assumed the old
schema.  This is the return code for such cases.  Retrying the
command usually will clear the problem.
</p></dd>
<dt>SQLITE_TOOBIG</dt>
<dd><p>SQLite cannot store more than about 64K of data in a single row
of a single table.  If you attempt to store more than 64K in a single
row, this is the return code you get.
</p></dd>
<dt>SQLITE_CONSTRAINT</dt>
<dd><p>This constant is returned if the SQL statement would have violated
a database constraint.
</p></dd>
</dl>
</blockquote>

<h2>The Extended API</h2>

<p>Only the three core routines shown above are required to use
SQLite.  But there are many other functions that provide 
useful interfaces.  These extended routines are as follows:
</p>

<blockquote><pre>
int sqlite_get_table(
  sqlite*,
  char *sql,
  char ***result,
  int *nrow,
  int *ncolumn,
  char **errmsg
);

void sqlite_free_table(char**);

void sqlite_interrupt(sqlite*);

int sqlite_complete(const char *sql);

void sqlite_busy_handler(sqlite*, int (*)(void*,const char*,int), void*);

void sqlite_busy_timeout(sqlite*, int ms);

const char sqlite_version[];

const char sqlite_encoding[];

int sqlite_exec_printf(
  sqlite*,
  char *sql,
  int (*)(void*,int,char**,char**),
  void*,
  char **errmsg,
  ...
);

int sqlite_exec_vprintf(
  sqlite*,
  char *sql,
  int (*)(void*,int,char**,char**),
  void*,
  char **errmsg,
  va_list
);

int sqlite_get_table_printf(
  sqlite*,
  char *sql,
  char ***result,
  int *nrow,
  int *ncolumn,
  char **errmsg,
  ...
);

int sqlite_get_table_vprintf(
  sqlite*,
  char *sql,
  char ***result,
  int *nrow,
  int *ncolumn,
  char **errmsg,
  va_list
);

</pre></blockquote>

<p>All of the above definitions are included in the "sqlite.h"
header file that comes in the source tree.</p>

<h2>Querying without using a callback function</h2>

<p>The <b>sqlite_get_table()</b> function is a wrapper around
<b>sqlite_exec()</b> that collects all the information from successive
callbacks and write it into memory obtained from malloc().  This
is a convenience function that allows the application to get the
entire result of a database query with a single function call.</p>

<p>The main result from <b>sqlite_get_table()</b> is an array of pointers
to strings.  There is one element in this array for each column of
each row in the result.  NULL results are represented by a NULL
pointer. In addition to the regular data, there is an added row at the 
beginning of the array that contains the names of each column of the
result.</p>

<p>As an example, consider the following query:</p>

<blockquote>
SELECT employee_name, login, host FROM users WHERE logic LIKE 'd%';
</blockquote>

<p>This query will return the name, login and host computer name
for every employee whose login begins with the letter "d".  If this
query is submitted to <b>sqlite_get_table()</b> the result might
look like this:</p>

<blockquote>
nrow = 2<br>
ncolumn = 3<br>
result[0] = "employee_name"<br>
result[1] = "login"<br>
result[2] = "host"<br>
result[3] = "dummy"<br>
result[4] = "No such user"<br>
result[5] = 0<br>
result[6] = "D. Richard Hipp"<br>
result[7] = "drh"<br>
result[8] = "zadok"
</blockquote>

<p>Notice that the "host" value for the "dummy" record is NULL so
the result[] array contains a NULL pointer at that slot.</p>

<p>If the result set of a query is empty, then by default
<b>sqlite_get_table()</b> will set nrow to 0 and leave its
result parameter is set to NULL.  But if the EMPTY_RESULT_CALLBACKS
pragma is ON then the result parameter is initialized to the names
of the columns only.  For example, consider this query which has
an empty result set:</p>

<blockquote>
SELECT employee_name, login, host FROM users WHERE employee_name IS NULL;
</blockquote>

<p>
The default behavior gives this results:
</p>

<blockquote>
nrow = 0<br>
ncolumn = 0<br>
result = 0<br>
</blockquote>

<p>
But if the EMPTY_RESULT_CALLBACKS pragma is ON, then the following
is returned:
</p>

<blockquote>
nrow = 0<br>
ncolumn = 3<br>
result[0] = "employee_name"<br>
result[1] = "login"<br>
result[2] = "host"<br>
</blockquote>

<p>Memory to hold the information returned by <b>sqlite_get_table()</b>
is obtained from malloc().  But the calling function should not try
to free this information directly.  Instead, pass the complete table
to <b>sqlite_free_table()</b> when the table is no longer needed.
It is safe to call <b>sqlite_free_table()</b> with a NULL pointer such
as would be returned if the result set is empty.</p>

<p>The <b>sqlite_get_table()</b> routine returns the same integer
result code as <b>sqlite_exec()</b>.</p>

<h2>Interrupting an SQLite operation</h2>

<p>The <b>sqlite_interrupt()</b> function can be called from a
different thread or from a signal handler to cause the current database
operation to exit at its first opportunity.  When this happens,
the <b>sqlite_exec()</b> routine (or the equivalent) that started
the database operation will return SQLITE_INTERRUPT.</p>

<h2>Testing for a complete SQL statement</h2>

<p>The next interface routine to SQLite is a convenience function used
to test whether or not a string forms a complete SQL statement.
If the <b>sqlite_complete()</b> function returns true when its input
is a string, then the argument forms a complete SQL statement.
There are no guarantees that the syntax of that statement is correct,
but we at least know the statement is complete.  If <b>sqlite_complete()</b>
returns false, then more text is required to complete the SQL statement.</p>

<p>For the purpose of the <b>sqlite_complete()</b> function, an SQL
statement is complete if it ends in a semicolon.</p>

<p>The <b>sqlite</b> command-line utility uses the <b>sqlite_complete()</b>
function to know when it needs to call <b>sqlite_exec()</b>.  After each
line of input is received, <b>sqlite</b> calls <b>sqlite_complete()</b>
on all input in its buffer.  If <b>sqlite_complete()</b> returns true, 
then <b>sqlite_exec()</b> is called and the input buffer is reset.  If
<b>sqlite_complete()</b> returns false, then the prompt is changed to
the continuation prompt and another line of text is read and added to
the input buffer.</p>

<h2>Library version string</h2>

<p>The SQLite library exports the string constant named
<b>sqlite_version</b> which contains the version number of the
library.  The header file contains a macro SQLITE_VERSION
with the same information.  If desired, a program can compare
the SQLITE_VERSION macro against the <b>sqlite_version</b>
string constant to verify that the version number of the
header file and the library match.</p> 

<h2>Library character encoding</h2>

<p>By default, SQLite assumes that all data uses a fixed-size
8-bit character (iso8859).  But if you give the --enable-utf8 option
to the configure script, then the library assumes UTF-8 variable
sized characters.  This makes a difference for the LIKE and GLOB
operators and the LENGTH() and SUBSTR() functions.  The static
string <b>sqlite_encoding</b> will be set to either "UTF-8" or
"iso8859" to indicate how the library was compiled.  In addition,
the <b>sqlite.h</b> header file will define one of the
macros <b>SQLITE_UTF8</b> or <b>SQLITE_ISO8859</b>, as appropriate.</p>

<p>Note that the character encoding mechanism used by SQLite cannot
be changed at run-time.  This is a compile-time option only.  The
<b>sqlite_encoding</b> character string just tells you how the library
was compiled.</p>

<h2>Changing the libraries response to locked files</h2>

<p>The <b>sqlite_busy_handler()</b> procedure can be used to register
a busy callback with an open SQLite database.  The busy callback will
be invoked whenever SQLite tries to open a file that is locked.
The callback will typically do some other useful work, or perhaps sleep,
in order to give the lock a chance to clear.  If the callback returns
non-zero, then SQLite tries again to open the database and the cycle
repeats.  If the callback returns zero, then SQLite aborts the current
operation and returns SQLITE_BUSY.</p>

<p>The arguments to <b>sqlite_busy_handler()</b> are the opaque
structure returned from <b>sqlite_open()</b>, a pointer to the busy
callback function, and a generic pointer that will be passed as
the first argument to the busy callback.  When SQLite invokes the
busy callback, it sends it three arguments:  the generic pointer
that was passed in as the third argument to <b>sqlite_busy_handler</b>,
the name of the database table or index that the library is trying
to open, and the number of times that the library has attempted to
open the database table or index.</p>

<p>For the common case where we want the busy callback to sleep,
the SQLite library provides a convenience routine <b>sqlite_busy_timeout()</b>.
The first argument to <b>sqlite_busy_timeout()</b> is a pointer to
an open SQLite database and the second argument is a number of milliseconds.
After <b>sqlite_busy_timeout()</b> has been executed, the SQLite library
will wait for the lock to clear for at least the number of milliseconds 
specified before it returns SQLITE_BUSY.  Specifying zero milliseconds for
the timeout restores the default behavior.</p>

<h2>Using the <tt>_printf()</tt> wrapper functions</h2>

<p>The four utility functions</p>

<p>
<ul>
<li><b>sqlite_exec_printf()</b></li>
<li><b>sqlite_exec_vprintf()</b></li>
<li><b>sqlite_get_table_printf()</b></li>
<li><b>sqlite_get_table_vprintf()</b></li>
</ul>
</p>

<p>implement the same query functionality as <b>sqlite_exec()</b>
and <b>sqlite_get_table()</b>.  But instead of taking a complete
SQL statement as their second argument, the four <b>_printf</b>
routines take a printf-style format string.  The SQL statement to
be executed is generated from this format string and from whatever
additional arguments are attached to the end of the function call.</p>

<p>There are two advantages to using the SQLite printf
functions instead of <b>sprintf()</b>.  First of all, with the
SQLite printf routines, there is never a danger of overflowing a
static buffer as there is with <b>sprintf()</b>.  The SQLite
printf routines automatically allocate (and later free)
as much memory as is 
necessary to hold the SQL statements generated.</p>

<p>The second advantage the SQLite printf routines have over
<b>sprintf()</b> is a new formatting option specifically designed
to support string literals in SQL.  Within the format string,
the %q formatting option works very much like %s in that it
reads a null-terminated string from the argument list and inserts
it into the result.  But %q translates the inserted string by
making two copies of every single-quote (') character in the
substituted string.  This has the effect of escaping the end-of-string
meaning of single-quote within a string literal.
</p>

<p>Consider an example.  Suppose you are trying to insert a string
value into a database table where the string value was obtained from
user input.  Suppose the string to be inserted is stored in a variable
named zString.  The code to do the insertion might look like this:</p>

<blockquote><pre>
sqlite_exec_printf(db,
  "INSERT INTO table1 VALUES('%s')",
  0, 0, 0, zString);
</pre></blockquote>

<p>If the zString variable holds text like "Hello", then this statement
will work just fine.  But suppose the user enters a string like 
"Hi y'all!".  The SQL statement generated reads as follows:

<blockquote><pre>
INSERT INTO table1 VALUES('Hi y'all')
</pre></blockquote>

<p>This is not valid SQL because of the apostrophy in the word "y'all".
But if the %q formatting option is used instead of %s, like this:</p>

<blockquote><pre>
sqlite_exec_printf(db,
  "INSERT INTO table1 VALUES('%q')",
  0, 0, 0, zString);
</pre></blockquote>

<p>Then the generated SQL will look like the following:</p>

<blockquote><pre>
INSERT INTO table1 VALUES('Hi y''all')
</pre></blockquote>

<p>Here the apostrophy has been escaped and the SQL statement is well-formed.
When generating SQL on-the-fly from data that might contain a
single-quote character ('), it is always a good idea to use the
SQLite printf routines and the %q formatting option instead of <b>sprintf</b>.
</p>

<h2>Usage Examples</h2>

<p>For examples of how the SQLite C/C++ interface can be used,
refer to the source code for the <b>sqlite</b> program in the
file <b>src/shell.c</b> of the source tree.
Additional information about sqlite is available at
<a href="sqlite.html">sqlite.html</a>.
See also the sources to the Tcl interface for SQLite in
the source file <b>src/tclsqlite.c</b>.</p>
}

puts {
<p><hr /></p>
<p><a href="index.html"><img src="/goback.jpg" border=0 />
Back to the SQLite Home Page</a>
</p>

</body></html>}